diff options
Diffstat (limited to 'arch/arm/plat-omap/dma.c')
| -rw-r--r-- | arch/arm/plat-omap/dma.c | 2500 |
1 files changed, 1790 insertions, 710 deletions
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c0a5c2fa42b..b5608b1f9fb 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1,15 +1,24 @@ /* * linux/arch/arm/plat-omap/dma.c * - * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * Copyright (C) 2003 - 2008 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> * Graphics DMA and LCD DMA graphics tranformations * by Imre Deak <imre.deak@nokia.com> + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * Support functions for the OMAP internal DMA channels. * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Converted DMA library into DMA platform driver. + * - G, Manjunath Kondaiah <manjugk@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -22,47 +31,124 @@ #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <linux/omap-dma.h> + +/* + * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA + * channels that an instance of the SDMA IP block can support. Used + * to size arrays. (The actual maximum on a particular SoC may be less + * than this -- for example, OMAP1 SDMA instances only support 17 logical + * DMA channels.) + */ +#define MAX_LOGICAL_DMA_CH_COUNT 32 + +#undef DEBUG + +#ifndef CONFIG_ARCH_OMAP1 +enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED, + DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED +}; + +enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; +#endif + +#define OMAP_DMA_ACTIVE 0x01 +#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff + +#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/dma.h> -#include <asm/io.h> +static struct omap_system_dma_plat_info *p; +static struct omap_dma_dev_attr *d; -#include <asm/arch/tc.h> +static int enable_1510_mode; +static u32 errata; -#define OMAP_DMA_ACTIVE 0x01 +static struct omap_dma_global_context_registers { + u32 dma_irqenable_l0; + u32 dma_irqenable_l1; + u32 dma_ocp_sysconfig; + u32 dma_gcr; +} omap_dma_global_context; -#define OMAP_DMA_CCR_EN (1 << 7) +struct dma_link_info { + int *linked_dmach_q; + int no_of_lchs_linked; -#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) + int q_count; + int q_tail; + int q_head; -static int enable_1510_mode = 0; + int chain_state; + int chain_mode; -struct omap_dma_lch { - int next_lch; - int dev_id; - u16 saved_csr; - u16 enabled_irqs; - const char *dev_name; - void (* callback)(int lch, u16 ch_status, void *data); - void *data; - long flags; }; +static struct dma_link_info *dma_linked_lch; + +#ifndef CONFIG_ARCH_OMAP1 + +/* Chain handling macros */ +#define OMAP_DMA_CHAIN_QINIT(chain_id) \ + do { \ + dma_linked_lch[chain_id].q_head = \ + dma_linked_lch[chain_id].q_tail = \ + dma_linked_lch[chain_id].q_count = 0; \ + } while (0) +#define OMAP_DMA_CHAIN_QFULL(chain_id) \ + (dma_linked_lch[chain_id].no_of_lchs_linked == \ + dma_linked_lch[chain_id].q_count) +#define OMAP_DMA_CHAIN_QLAST(chain_id) \ + do { \ + ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \ + dma_linked_lch[chain_id].q_count) \ + } while (0) +#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \ + (0 == dma_linked_lch[chain_id].q_count) +#define __OMAP_DMA_CHAIN_INCQ(end) \ + ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked) +#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \ + do { \ + __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \ + dma_linked_lch[chain_id].q_count--; \ + } while (0) + +#define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \ + do { \ + __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \ + dma_linked_lch[chain_id].q_count++; \ + } while (0) +#endif + +static int dma_lch_count; static int dma_chan_count; +static int omap_dma_reserve_channels; static spinlock_t dma_chan_lock; -static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT]; - -const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { - INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3, - INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7, - INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10, - INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13, - INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD -}; +static struct omap_dma_lch *dma_chan; + +static inline void disable_lnk(int lch); +static void omap_disable_channel_irq(int lch); +static inline void omap_enable_channel_irq(int lch); + +#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ + __func__); + +#ifdef CONFIG_ARCH_OMAP15XX +/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ +static int omap_dma_in_1510_mode(void) +{ + return enable_1510_mode; +} +#else +#define omap_dma_in_1510_mode() 0 +#endif +#ifdef CONFIG_ARCH_OMAP1 static inline int get_gdma_dev(int req) { u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; @@ -82,300 +168,829 @@ static inline void set_gdma_dev(int req, int dev) l |= (dev - 1) << shift; omap_writel(l, reg); } - -static void clear_lch_regs(int lch) +#else +#define set_gdma_dev(req, dev) do {} while (0) +#define omap_readl(reg) 0 +#define omap_writel(val, reg) do {} while (0) +#endif + +#ifdef CONFIG_ARCH_OMAP1 +void omap_set_dma_priority(int lch, int dst_port, int priority) { - int i; - u32 lch_base = OMAP_DMA_BASE + lch * 0x40; + unsigned long reg; + u32 l; - for (i = 0; i < 0x2c; i += 2) - omap_writew(0, lch_base + i); + if (dma_omap1()) { + switch (dst_port) { + case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ + reg = OMAP_TC_OCPT1_PRIOR; + break; + case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ + reg = OMAP_TC_OCPT2_PRIOR; + break; + case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ + reg = OMAP_TC_EMIFF_PRIOR; + break; + case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ + reg = OMAP_TC_EMIFS_PRIOR; + break; + default: + BUG(); + return; + } + l = omap_readl(reg); + l &= ~(0xf << 8); + l |= (priority & 0xf) << 8; + omap_writel(l, reg); + } } +#endif -void omap_set_dma_priority(int dst_port, int priority) +#ifdef CONFIG_ARCH_OMAP2PLUS +void omap_set_dma_priority(int lch, int dst_port, int priority) { - unsigned long reg; - u32 l; + u32 ccr; - switch (dst_port) { - case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ - reg = OMAP_TC_OCPT1_PRIOR; - break; - case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ - reg = OMAP_TC_OCPT2_PRIOR; - break; - case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ - reg = OMAP_TC_EMIFF_PRIOR; - break; - case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ - reg = OMAP_TC_EMIFS_PRIOR; - break; - default: - BUG(); - return; - } - l = omap_readl(reg); - l &= ~(0xf << 8); - l |= (priority & 0xf) << 8; - omap_writel(l, reg); + ccr = p->dma_read(CCR, lch); + if (priority) + ccr |= (1 << 6); + else + ccr &= ~(1 << 6); + p->dma_write(ccr, CCR, lch); } +#endif +EXPORT_SYMBOL(omap_set_dma_priority); void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, - int frame_count, int sync_mode) + int frame_count, int sync_mode, + int dma_trigger, int src_or_dst_synch) { - u16 w; + u32 l; + + l = p->dma_read(CSDP, lch); + l &= ~0x03; + l |= data_type; + p->dma_write(l, CSDP, lch); + + if (dma_omap1()) { + u16 ccr; + + ccr = p->dma_read(CCR, lch); + ccr &= ~(1 << 5); + if (sync_mode == OMAP_DMA_SYNC_FRAME) + ccr |= 1 << 5; + p->dma_write(ccr, CCR, lch); + + ccr = p->dma_read(CCR2, lch); + ccr &= ~(1 << 2); + if (sync_mode == OMAP_DMA_SYNC_BLOCK) + ccr |= 1 << 2; + p->dma_write(ccr, CCR2, lch); + } + + if (dma_omap2plus() && dma_trigger) { + u32 val; - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~0x03; - w |= data_type; - omap_writew(w, OMAP_DMA_CSDP(lch)); + val = p->dma_read(CCR, lch); - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(1 << 5); - if (sync_mode == OMAP_DMA_SYNC_FRAME) - w |= 1 << 5; - omap_writew(w, OMAP_DMA_CCR(lch)); + /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ + val &= ~((1 << 23) | (3 << 19) | 0x1f); + val |= (dma_trigger & ~0x1f) << 14; + val |= dma_trigger & 0x1f; - w = omap_readw(OMAP_DMA_CCR2(lch)); - w &= ~(1 << 2); - if (sync_mode == OMAP_DMA_SYNC_BLOCK) - w |= 1 << 2; - omap_writew(w, OMAP_DMA_CCR2(lch)); + if (sync_mode & OMAP_DMA_SYNC_FRAME) + val |= 1 << 5; + else + val &= ~(1 << 5); - omap_writew(elem_count, OMAP_DMA_CEN(lch)); - omap_writew(frame_count, OMAP_DMA_CFN(lch)); + if (sync_mode & OMAP_DMA_SYNC_BLOCK) + val |= 1 << 18; + else + val &= ~(1 << 18); + if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) { + val &= ~(1 << 24); /* dest synch */ + val |= (1 << 23); /* Prefetch */ + } else if (src_or_dst_synch) { + val |= 1 << 24; /* source synch */ + } else { + val &= ~(1 << 24); /* dest synch */ + } + p->dma_write(val, CCR, lch); + } + + p->dma_write(elem_count, CEN, lch); + p->dma_write(frame_count, CFN, lch); } +EXPORT_SYMBOL(omap_set_dma_transfer_params); + void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { - u16 w; - BUG_ON(omap_dma_in_1510_mode()); - w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03; - switch (mode) { - case OMAP_DMA_CONSTANT_FILL: - w |= 0x01; - break; - case OMAP_DMA_TRANSPARENT_COPY: - w |= 0x02; - break; - case OMAP_DMA_COLOR_DIS: - break; - default: - BUG(); + if (dma_omap1()) { + u16 w; + + w = p->dma_read(CCR2, lch); + w &= ~0x03; + + switch (mode) { + case OMAP_DMA_CONSTANT_FILL: + w |= 0x01; + break; + case OMAP_DMA_TRANSPARENT_COPY: + w |= 0x02; + break; + case OMAP_DMA_COLOR_DIS: + break; + default: + BUG(); + } + p->dma_write(w, CCR2, lch); + + w = p->dma_read(LCH_CTRL, lch); + w &= ~0x0f; + /* Default is channel type 2D */ + if (mode) { + p->dma_write(color, COLOR, lch); + w |= 1; /* Channel type G */ + } + p->dma_write(w, LCH_CTRL, lch); + } + + if (dma_omap2plus()) { + u32 val; + + val = p->dma_read(CCR, lch); + val &= ~((1 << 17) | (1 << 16)); + + switch (mode) { + case OMAP_DMA_CONSTANT_FILL: + val |= 1 << 16; + break; + case OMAP_DMA_TRANSPARENT_COPY: + val |= 1 << 17; + break; + case OMAP_DMA_COLOR_DIS: + break; + default: + BUG(); + } + p->dma_write(val, CCR, lch); + + color &= 0xffffff; + p->dma_write(color, COLOR, lch); } - omap_writew(w, OMAP_DMA_CCR2(lch)); +} +EXPORT_SYMBOL(omap_set_dma_color_mode); + +void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) +{ + if (dma_omap2plus()) { + u32 csdp; - w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f; - /* Default is channel type 2D */ - if (mode) { - omap_writew((u16)color, OMAP_DMA_COLOR_L(lch)); - omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch)); - w |= 1; /* Channel type G */ + csdp = p->dma_read(CSDP, lch); + csdp &= ~(0x3 << 16); + csdp |= (mode << 16); + p->dma_write(csdp, CSDP, lch); } - omap_writew(w, OMAP_DMA_LCH_CTRL(lch)); } +EXPORT_SYMBOL(omap_set_dma_write_mode); +void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) +{ + if (dma_omap1() && !dma_omap15xx()) { + u32 l; + l = p->dma_read(LCH_CTRL, lch); + l &= ~0x7; + l |= mode; + p->dma_write(l, LCH_CTRL, lch); + } +} +EXPORT_SYMBOL(omap_set_dma_channel_mode); + +/* Note that src_port is only for omap1 */ void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start) + unsigned long src_start, + int src_ei, int src_fi) { - u16 w; + u32 l; - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 2); - w |= src_port << 2; - omap_writew(w, OMAP_DMA_CSDP(lch)); + if (dma_omap1()) { + u16 w; + + w = p->dma_read(CSDP, lch); + w &= ~(0x1f << 2); + w |= src_port << 2; + p->dma_write(w, CSDP, lch); + } - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 12); - w |= src_amode << 12; - omap_writew(w, OMAP_DMA_CCR(lch)); + l = p->dma_read(CCR, lch); + l &= ~(0x03 << 12); + l |= src_amode << 12; + p->dma_write(l, CCR, lch); - omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch)); - omap_writew(src_start, OMAP_DMA_CSSA_L(lch)); + p->dma_write(src_start, CSSA, lch); + + p->dma_write(src_ei, CSEI, lch); + p->dma_write(src_fi, CSFI, lch); +} +EXPORT_SYMBOL(omap_set_dma_src_params); + +void omap_set_dma_params(int lch, struct omap_dma_channel_params *params) +{ + omap_set_dma_transfer_params(lch, params->data_type, + params->elem_count, params->frame_count, + params->sync_mode, params->trigger, + params->src_or_dst_synch); + omap_set_dma_src_params(lch, params->src_port, + params->src_amode, params->src_start, + params->src_ei, params->src_fi); + + omap_set_dma_dest_params(lch, params->dst_port, + params->dst_amode, params->dst_start, + params->dst_ei, params->dst_fi); + if (params->read_prio || params->write_prio) + omap_dma_set_prio_lch(lch, params->read_prio, + params->write_prio); } +EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CSEI(lch)); - omap_writew(fidx, OMAP_DMA_CSFI(lch)); + if (dma_omap2plus()) + return; + + p->dma_write(eidx, CSEI, lch); + p->dma_write(fidx, CSFI, lch); } +EXPORT_SYMBOL(omap_set_dma_src_index); void omap_set_dma_src_data_pack(int lch, int enable) { - u16 w; + u32 l; - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6); - w |= enable ? (1 << 6) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + l = p->dma_read(CSDP, lch); + l &= ~(1 << 6); + if (enable) + l |= (1 << 6); + p->dma_write(l, CSDP, lch); } +EXPORT_SYMBOL(omap_set_dma_src_data_pack); void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + unsigned int burst = 0; + u32 l; + + l = p->dma_read(CSDP, lch); + l &= ~(0x03 << 7); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 7); + if (dma_omap2plus()) + burst = 0x1; + else + burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - /* not supported by current hardware + if (dma_omap2plus()) { + burst = 0x2; + break; + } + /* + * not supported by current hardware on OMAP1 * w |= (0x03 << 7); * fall through */ + case OMAP_DMA_DATA_BURST_16: + if (dma_omap2plus()) { + burst = 0x3; + break; + } + /* + * OMAP1 don't support burst 16 + * fall through + */ default: BUG(); } - omap_writew(w, OMAP_DMA_CSDP(lch)); + + l |= (burst << 7); + p->dma_write(l, CSDP, lch); } +EXPORT_SYMBOL(omap_set_dma_src_burst_mode); +/* Note that dest_port is only for OMAP1 */ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start) + unsigned long dest_start, + int dst_ei, int dst_fi) { - u16 w; + u32 l; + + if (dma_omap1()) { + l = p->dma_read(CSDP, lch); + l &= ~(0x1f << 9); + l |= dest_port << 9; + p->dma_write(l, CSDP, lch); + } - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 9); - w |= dest_port << 9; - omap_writew(w, OMAP_DMA_CSDP(lch)); + l = p->dma_read(CCR, lch); + l &= ~(0x03 << 14); + l |= dest_amode << 14; + p->dma_write(l, CCR, lch); - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 14); - w |= dest_amode << 14; - omap_writew(w, OMAP_DMA_CCR(lch)); + p->dma_write(dest_start, CDSA, lch); - omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch)); - omap_writew(dest_start, OMAP_DMA_CDSA_L(lch)); + p->dma_write(dst_ei, CDEI, lch); + p->dma_write(dst_fi, CDFI, lch); } +EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CDEI(lch)); - omap_writew(fidx, OMAP_DMA_CDFI(lch)); + if (dma_omap2plus()) + return; + + p->dma_write(eidx, CDEI, lch); + p->dma_write(fidx, CDFI, lch); } +EXPORT_SYMBOL(omap_set_dma_dest_index); void omap_set_dma_dest_data_pack(int lch, int enable) { - u16 w; + u32 l; - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13); - w |= enable ? (1 << 13) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + l = p->dma_read(CSDP, lch); + l &= ~(1 << 13); + if (enable) + l |= 1 << 13; + p->dma_write(l, CSDP, lch); } +EXPORT_SYMBOL(omap_set_dma_dest_data_pack); void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + unsigned int burst = 0; + u32 l; + + l = p->dma_read(CSDP, lch); + l &= ~(0x03 << 14); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 14); + if (dma_omap2plus()) + burst = 0x1; + else + burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - w |= (0x03 << 14); + if (dma_omap2plus()) + burst = 0x2; + else + burst = 0x3; break; + case OMAP_DMA_DATA_BURST_16: + if (dma_omap2plus()) { + burst = 0x3; + break; + } + /* + * OMAP1 don't support burst 16 + * fall through + */ default: printk(KERN_ERR "Invalid DMA burst mode\n"); BUG(); return; } - omap_writew(w, OMAP_DMA_CSDP(lch)); + l |= (burst << 14); + p->dma_write(l, CSDP, lch); } +EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); -static inline void init_intr(int lch) +static inline void omap_enable_channel_irq(int lch) { - u16 w; + /* Clear CSR */ + if (dma_omap1()) + p->dma_read(CSR, lch); + else + p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); - /* Read CSR to make sure it's cleared. */ - w = omap_readw(OMAP_DMA_CSR(lch)); /* Enable some nice interrupts. */ - omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch)); - dma_chan[lch].flags |= OMAP_DMA_ACTIVE; + p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch); } +static inline void omap_disable_channel_irq(int lch) +{ + /* disable channel interrupts */ + p->dma_write(0, CICR, lch); + /* Clear CSR */ + if (dma_omap1()) + p->dma_read(CSR, lch); + else + p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); +} + +void omap_enable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs |= bits; +} +EXPORT_SYMBOL(omap_enable_dma_irq); + +void omap_disable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs &= ~bits; +} +EXPORT_SYMBOL(omap_disable_dma_irq); + static inline void enable_lnk(int lch) { - u16 w; + u32 l; - /* Clear the STOP_LNK bits */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w &= ~(1 << 14); - omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); + l = p->dma_read(CLNK_CTRL, lch); - /* And set the ENABLE_LNK bits */ + if (dma_omap1()) + l &= ~(1 << 14); + + /* Set the ENABLE_LNK bits */ if (dma_chan[lch].next_lch != -1) - omap_writew(dma_chan[lch].next_lch | (1 << 15), - OMAP_DMA_CLNK_CTRL(lch)); + l = dma_chan[lch].next_lch | (1 << 15); + +#ifndef CONFIG_ARCH_OMAP1 + if (dma_omap2plus()) + if (dma_chan[lch].next_linked_ch != -1) + l = dma_chan[lch].next_linked_ch | (1 << 15); +#endif + + p->dma_write(l, CLNK_CTRL, lch); } static inline void disable_lnk(int lch) { - u16 w; + u32 l; + + l = p->dma_read(CLNK_CTRL, lch); /* Disable interrupts */ - omap_writew(0, OMAP_DMA_CICR(lch)); + omap_disable_channel_irq(lch); + + if (dma_omap1()) { + /* Set the STOP_LNK bit */ + l |= 1 << 14; + } - /* Set the STOP_LNK bit */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w |= (1 << 14); - w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); + if (dma_omap2plus()) { + /* Clear the ENABLE_LNK bit */ + l &= ~(1 << 15); + } + p->dma_write(l, CLNK_CTRL, lch); dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } +static inline void omap2_enable_irq_lch(int lch) +{ + u32 val; + unsigned long flags; + + if (dma_omap1()) + return; + + spin_lock_irqsave(&dma_chan_lock, flags); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Enable interrupt */ + val = p->dma_read(IRQENABLE_L0, lch); + val |= 1 << lch; + p->dma_write(val, IRQENABLE_L0, lch); + spin_unlock_irqrestore(&dma_chan_lock, flags); +} + +static inline void omap2_disable_irq_lch(int lch) +{ + u32 val; + unsigned long flags; + + if (dma_omap1()) + return; + + spin_lock_irqsave(&dma_chan_lock, flags); + /* Disable interrupt */ + val = p->dma_read(IRQENABLE_L0, lch); + val &= ~(1 << lch); + p->dma_write(val, IRQENABLE_L0, lch); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); + spin_unlock_irqrestore(&dma_chan_lock, flags); +} + +int omap_request_dma(int dev_id, const char *dev_name, + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch_out) +{ + int ch, free_ch = -1; + unsigned long flags; + struct omap_dma_lch *chan; + + spin_lock_irqsave(&dma_chan_lock, flags); + for (ch = 0; ch < dma_chan_count; ch++) { + if (free_ch == -1 && dma_chan[ch].dev_id == -1) { + free_ch = ch; + /* Exit after first free channel found */ + break; + } + } + if (free_ch == -1) { + spin_unlock_irqrestore(&dma_chan_lock, flags); + return -EBUSY; + } + chan = dma_chan + free_ch; + chan->dev_id = dev_id; + + if (p->clear_lch_regs) + p->clear_lch_regs(free_ch); + + if (dma_omap2plus()) + omap_clear_dma(free_ch); + + spin_unlock_irqrestore(&dma_chan_lock, flags); + + chan->dev_name = dev_name; + chan->callback = callback; + chan->data = data; + chan->flags = 0; + +#ifndef CONFIG_ARCH_OMAP1 + if (dma_omap2plus()) { + chan->chain_id = -1; + chan->next_linked_ch = -1; + } +#endif + + chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; + + if (dma_omap1()) + chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; + else if (dma_omap2plus()) + chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | + OMAP2_DMA_TRANS_ERR_IRQ; + + if (dma_omap16xx()) { + /* If the sync device is set, configure it dynamically. */ + if (dev_id != 0) { + set_gdma_dev(free_ch + 1, dev_id); + dev_id = free_ch + 1; + } + /* + * Disable the 1510 compatibility mode and set the sync device + * id. + */ + p->dma_write(dev_id | (1 << 10), CCR, free_ch); + } else if (dma_omap1()) { + p->dma_write(dev_id, CCR, free_ch); + } + + if (dma_omap2plus()) { + omap_enable_channel_irq(free_ch); + omap2_enable_irq_lch(free_ch); + } + + *dma_ch_out = free_ch; + + return 0; +} +EXPORT_SYMBOL(omap_request_dma); + +void omap_free_dma(int lch) +{ + unsigned long flags; + + if (dma_chan[lch].dev_id == -1) { + pr_err("omap_dma: trying to free unallocated DMA channel %d\n", + lch); + return; + } + + /* Disable interrupt for logical channel */ + if (dma_omap2plus()) + omap2_disable_irq_lch(lch); + + /* Disable all DMA interrupts for the channel. */ + omap_disable_channel_irq(lch); + + /* Make sure the DMA transfer is stopped. */ + p->dma_write(0, CCR, lch); + + /* Clear registers */ + if (dma_omap2plus()) + omap_clear_dma(lch); + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); +} +EXPORT_SYMBOL(omap_free_dma); + +/** + * @brief omap_dma_set_global_params : Set global priority settings for dma + * + * @param arb_rate + * @param max_fifo_depth + * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM + * DMA_THREAD_RESERVE_ONET + * DMA_THREAD_RESERVE_TWOT + * DMA_THREAD_RESERVE_THREET + */ +void +omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) +{ + u32 reg; + + if (dma_omap1()) { + printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); + return; + } + + if (max_fifo_depth == 0) + max_fifo_depth = 1; + if (arb_rate == 0) + arb_rate = 1; + + reg = 0xff & max_fifo_depth; + reg |= (0x3 & tparams) << 12; + reg |= (arb_rate & 0xff) << 16; + + p->dma_write(reg, GCR, 0); +} +EXPORT_SYMBOL(omap_dma_set_global_params); + +/** + * @brief omap_dma_set_prio_lch : Set channel wise priority settings + * + * @param lch + * @param read_prio - Read priority + * @param write_prio - Write priority + * Both of the above can be set with one of the following values : + * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW + */ +int +omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio) +{ + u32 l; + + if (unlikely((lch < 0 || lch >= dma_lch_count))) { + printk(KERN_ERR "Invalid channel id\n"); + return -EINVAL; + } + l = p->dma_read(CCR, lch); + l &= ~((1 << 6) | (1 << 26)); + if (d->dev_caps & IS_RW_PRIORITY) + l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); + else + l |= ((read_prio & 0x1) << 6); + + p->dma_write(l, CCR, lch); + + return 0; +} +EXPORT_SYMBOL(omap_dma_set_prio_lch); + +/* + * Clears any DMA state so the DMA engine is ready to restart with new buffers + * through omap_start_dma(). Any buffers in flight are discarded. + */ +void omap_clear_dma(int lch) +{ + unsigned long flags; + + local_irq_save(flags); + p->clear_dma(lch); + local_irq_restore(flags); +} +EXPORT_SYMBOL(omap_clear_dma); + void omap_start_dma(int lch) { - u16 w; + u32 l; + + /* + * The CPC/CDAC register needs to be initialized to zero + * before starting dma transfer. + */ + if (dma_omap15xx()) + p->dma_write(0, CPC, lch); + else + p->dma_write(0, CDAC, lch); if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; - char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; + char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; - dma_chan_link_map[lch] = 1; /* Set the link register of the first channel */ enable_lnk(lch); memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); + dma_chan_link_map[lch] = 1; + cur_lch = dma_chan[lch].next_lch; do { next_lch = dma_chan[cur_lch].next_lch; - /* The loop case: we've been here already */ + /* The loop case: we've been here already */ if (dma_chan_link_map[cur_lch]) break; /* Mark the current channel */ dma_chan_link_map[cur_lch] = 1; enable_lnk(cur_lch); - init_intr(cur_lch); + omap_enable_channel_irq(cur_lch); cur_lch = next_lch; } while (next_lch != -1); - } + } else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS)) + p->dma_write(lch, CLNK_CTRL, lch); + + omap_enable_channel_irq(lch); + + l = p->dma_read(CCR, lch); - init_intr(lch); + if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING)) + l |= OMAP_DMA_CCR_BUFFERING_DISABLE; + l |= OMAP_DMA_CCR_EN; + + /* + * As dma_write() uses IO accessors which are weakly ordered, there + * is no guarantee that data in coherent DMA memory will be visible + * to the DMA device. Add a memory barrier here to ensure that any + * such data is visible prior to enabling DMA. + */ + mb(); + p->dma_write(l, CCR, lch); - w = omap_readw(OMAP_DMA_CCR(lch)); - w |= OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } +EXPORT_SYMBOL(omap_start_dma); void omap_stop_dma(int lch) { - u16 w; + u32 l; + + /* Disable all interrupts on the channel */ + omap_disable_channel_irq(lch); + + l = p->dma_read(CCR, lch); + if (IS_DMA_ERRATA(DMA_ERRATA_i541) && + (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) { + int i = 0; + u32 sys_cf; + + /* Configure No-Standby */ + l = p->dma_read(OCP_SYSCONFIG, lch); + sys_cf = l; + l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK; + l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE); + p->dma_write(l , OCP_SYSCONFIG, 0); + + l = p->dma_read(CCR, lch); + l &= ~OMAP_DMA_CCR_EN; + p->dma_write(l, CCR, lch); + + /* Wait for sDMA FIFO drain */ + l = p->dma_read(CCR, lch); + while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE | + OMAP_DMA_CCR_WR_ACTIVE))) { + udelay(5); + i++; + l = p->dma_read(CCR, lch); + } + if (i >= 100) + pr_err("DMA drain did not complete on lch %d\n", lch); + /* Restore OCP_SYSCONFIG */ + p->dma_write(sys_cf, OCP_SYSCONFIG, lch); + } else { + l &= ~OMAP_DMA_CCR_EN; + p->dma_write(l, CCR, lch); + } + + /* + * Ensure that data transferred by DMA is visible to any access + * after DMA has been disabled. This is important for coherent + * DMA regions. + */ + mb(); if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; - char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; + char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); do { @@ -390,149 +1005,136 @@ void omap_stop_dma(int lch) next_lch = dma_chan[cur_lch].next_lch; cur_lch = next_lch; } while (next_lch != -1); - - return; } - /* Disable all interrupts on the channel */ - omap_writew(0, OMAP_DMA_CICR(lch)); - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } +EXPORT_SYMBOL(omap_stop_dma); -void omap_enable_dma_irq(int lch, u16 bits) -{ - dma_chan[lch].enabled_irqs |= bits; -} - -void omap_disable_dma_irq(int lch, u16 bits) +/* + * Allows changing the DMA callback function or data. This may be needed if + * the driver shares a single DMA channel for multiple dma triggers. + */ +int omap_set_dma_callback(int lch, + void (*callback)(int lch, u16 ch_status, void *data), + void *data) { - dma_chan[lch].enabled_irqs &= ~bits; -} + unsigned long flags; -static int dma_handle_ch(int ch) -{ - u16 csr; + if (lch < 0) + return -ENODEV; - if (enable_1510_mode && ch >= 6) { - csr = dma_chan[ch].saved_csr; - dma_chan[ch].saved_csr = 0; - } else - csr = omap_readw(OMAP_DMA_CSR(ch)); - if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { - dma_chan[ch + 6].saved_csr = csr >> 7; - csr &= 0x7f; - } - if (!csr) - return 0; - if (unlikely(dma_chan[ch].dev_id == -1)) { - printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", - ch, csr); - return 0; + spin_lock_irqsave(&dma_chan_lock, flags); + if (dma_chan[lch].dev_id == -1) { + printk(KERN_ERR "DMA callback for not set for free channel\n"); + spin_unlock_irqrestore(&dma_chan_lock, flags); + return -EINVAL; } - if (unlikely(csr & OMAP_DMA_TOUT_IRQ)) - printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id); - if (unlikely(csr & OMAP_DMA_DROP_IRQ)) - printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n", - dma_chan[ch].dev_id); - if (likely(csr & OMAP_DMA_BLOCK_IRQ)) - dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; - if (likely(dma_chan[ch].callback != NULL)) - dma_chan[ch].callback(ch, csr, dma_chan[ch].data); - return 1; + dma_chan[lch].callback = callback; + dma_chan[lch].data = data; + spin_unlock_irqrestore(&dma_chan_lock, flags); + + return 0; } +EXPORT_SYMBOL(omap_set_dma_callback); -static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +/* + * Returns current physical source address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CSSA_L register overflow between the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_src_pos(int lch) { - int ch = ((int) dev_id) - 1; - int handled = 0; + dma_addr_t offset = 0; - for (;;) { - int handled_now = 0; + if (dma_omap15xx()) + offset = p->dma_read(CPC, lch); + else + offset = p->dma_read(CSAC, lch); - handled_now += dma_handle_ch(ch); - if (enable_1510_mode && dma_chan[ch + 6].saved_csr) - handled_now += dma_handle_ch(ch + 6); - if (!handled_now) - break; - handled += handled_now; + if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) + offset = p->dma_read(CSAC, lch); + + if (!dma_omap15xx()) { + /* + * CDAC == 0 indicates that the DMA transfer on the channel has + * not been started (no data has been transferred so far). + * Return the programmed source start address in this case. + */ + if (likely(p->dma_read(CDAC, lch))) + offset = p->dma_read(CSAC, lch); + else + offset = p->dma_read(CSSA, lch); } - return handled ? IRQ_HANDLED : IRQ_NONE; + if (dma_omap1()) + offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); + + return offset; } +EXPORT_SYMBOL(omap_get_dma_src_pos); -int omap_request_dma(int dev_id, const char *dev_name, - void (* callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch_out) +/* + * Returns current physical destination address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CDSA_L register overflow between the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_dst_pos(int lch) { - int ch, free_ch = -1; - unsigned long flags; - struct omap_dma_lch *chan; + dma_addr_t offset = 0; - spin_lock_irqsave(&dma_chan_lock, flags); - for (ch = 0; ch < dma_chan_count; ch++) { - if (free_ch == -1 && dma_chan[ch].dev_id == -1) { - free_ch = ch; - if (dev_id == 0) - break; - } - } - if (free_ch == -1) { - spin_unlock_irqrestore(&dma_chan_lock, flags); - return -EBUSY; + if (dma_omap15xx()) + offset = p->dma_read(CPC, lch); + else + offset = p->dma_read(CDAC, lch); + + /* + * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is + * read before the DMA controller finished disabling the channel. + */ + if (!dma_omap15xx() && offset == 0) { + offset = p->dma_read(CDAC, lch); + /* + * CDAC == 0 indicates that the DMA transfer on the channel has + * not been started (no data has been transferred so far). + * Return the programmed destination start address in this case. + */ + if (unlikely(!offset)) + offset = p->dma_read(CDSA, lch); } - chan = dma_chan + free_ch; - chan->dev_id = dev_id; - clear_lch_regs(free_ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - chan->dev_id = dev_id; - chan->dev_name = dev_name; - chan->callback = callback; - chan->data = data; - chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; + if (dma_omap1()) + offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); - if (cpu_is_omap16xx()) { - /* If the sync device is set, configure it dynamically. */ - if (dev_id != 0) { - set_gdma_dev(free_ch + 1, dev_id); - dev_id = free_ch + 1; - } - /* Disable the 1510 compatibility mode and set the sync device - * id. */ - omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch)); - } else { - omap_writew(dev_id, OMAP_DMA_CCR(free_ch)); - } - *dma_ch_out = free_ch; + return offset; +} +EXPORT_SYMBOL(omap_get_dma_dst_pos); - return 0; +int omap_get_dma_active_status(int lch) +{ + return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0; } +EXPORT_SYMBOL(omap_get_dma_active_status); -void omap_free_dma(int ch) +int omap_dma_running(void) { - unsigned long flags; + int lch; - spin_lock_irqsave(&dma_chan_lock, flags); - if (dma_chan[ch].dev_id == -1) { - printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - return; - } - dma_chan[ch].dev_id = -1; - spin_unlock_irqrestore(&dma_chan_lock, flags); + if (dma_omap1()) + if (omap_lcd_dma_running()) + return 1; - /* Disable all DMA interrupts for the channel. */ - omap_writew(0, OMAP_DMA_CICR(ch)); - /* Make sure the DMA transfer is stopped. */ - omap_writew(0, OMAP_DMA_CCR(ch)); -} + for (lch = 0; lch < dma_chan_count; lch++) + if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) + return 1; -int omap_dma_in_1510_mode(void) -{ - return enable_1510_mode; + return 0; } /* @@ -540,9 +1142,14 @@ int omap_dma_in_1510_mode(void) * For this DMA link to start, you still need to start (see omap_start_dma) * the first one. That will fire up the entire queue. */ -void omap_dma_link_lch (int lch_head, int lch_queue) +void omap_dma_link_lch(int lch_head, int lch_queue) { if (omap_dma_in_1510_mode()) { + if (lch_head == lch_queue) { + p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8), + CCR, lch_head); + return; + } printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); BUG(); return; @@ -550,19 +1157,25 @@ void omap_dma_link_lch (int lch_head, int lch_queue) if ((dma_chan[lch_head].dev_id == -1) || (dma_chan[lch_queue].dev_id == -1)) { - printk(KERN_ERR "omap_dma: trying to link non requested channels\n"); + pr_err("omap_dma: trying to link non requested channels\n"); dump_stack(); } dma_chan[lch_head].next_lch = lch_queue; } +EXPORT_SYMBOL(omap_dma_link_lch); /* * Once the DMA queue is stopped, we can destroy it. */ -void omap_dma_unlink_lch (int lch_head, int lch_queue) +void omap_dma_unlink_lch(int lch_head, int lch_queue) { if (omap_dma_in_1510_mode()) { + if (lch_head == lch_queue) { + p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8), + CCR, lch_head); + return; + } printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); BUG(); return; @@ -570,547 +1183,1014 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue) if (dma_chan[lch_head].next_lch != lch_queue || dma_chan[lch_head].next_lch == -1) { - printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n"); + pr_err("omap_dma: trying to unlink non linked channels\n"); dump_stack(); } - if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || - (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) { - printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n"); + (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) { + pr_err("omap_dma: You need to stop the DMA channels before unlinking\n"); dump_stack(); } dma_chan[lch_head].next_lch = -1; } +EXPORT_SYMBOL(omap_dma_unlink_lch); - -static struct lcd_dma_info { - spinlock_t lock; - int reserved; - void (* callback)(u16 status, void *data); - void *cb_data; - - int active; - unsigned long addr, size; - int rotate, data_type, xres, yres; - int vxres; - int mirror; - int xscale, yscale; - int ext_ctrl; - int src_port; - int single_transfer; -} lcd_dma; - -void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type) +#ifndef CONFIG_ARCH_OMAP1 +/* Create chain of DMA channesls */ +static void create_dma_lch_chain(int lch_head, int lch_queue) { - lcd_dma.addr = addr; - lcd_dma.data_type = data_type; - lcd_dma.xres = fb_xres; - lcd_dma.yres = fb_yres; -} + u32 l; -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} + /* Check if this is the first link in chain */ + if (dma_chan[lch_head].next_linked_ch == -1) { + dma_chan[lch_head].next_linked_ch = lch_queue; + dma_chan[lch_head].prev_linked_ch = lch_queue; + dma_chan[lch_queue].next_linked_ch = lch_head; + dma_chan[lch_queue].prev_linked_ch = lch_head; + } -void omap_set_lcd_dma_ext_controller(int external) -{ - lcd_dma.ext_ctrl = external; + /* a link exists, link the new channel in circular chain */ + else { + dma_chan[lch_queue].next_linked_ch = + dma_chan[lch_head].next_linked_ch; + dma_chan[lch_queue].prev_linked_ch = lch_head; + dma_chan[lch_head].next_linked_ch = lch_queue; + dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch = + lch_queue; + } + + l = p->dma_read(CLNK_CTRL, lch_head); + l &= ~(0x1f); + l |= lch_queue; + p->dma_write(l, CLNK_CTRL, lch_head); + + l = p->dma_read(CLNK_CTRL, lch_queue); + l &= ~(0x1f); + l |= (dma_chan[lch_queue].next_linked_ch); + p->dma_write(l, CLNK_CTRL, lch_queue); } -void omap_set_lcd_dma_single_transfer(int single) +/** + * @brief omap_request_dma_chain : Request a chain of DMA channels + * + * @param dev_id - Device id using the dma channel + * @param dev_name - Device name + * @param callback - Call back function + * @chain_id - + * @no_of_chans - Number of channels requested + * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN + * OMAP_DMA_DYNAMIC_CHAIN + * @params - Channel parameters + * + * @return - Success : 0 + * Failure: -EINVAL/-ENOMEM + */ +int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int lch, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, int chain_mode, + struct omap_dma_channel_params params) { - lcd_dma.single_transfer = single; -} + int *channels; + int i, err; + + /* Is the chain mode valid ? */ + if (chain_mode != OMAP_DMA_STATIC_CHAIN + && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) { + printk(KERN_ERR "Invalid chain mode requested\n"); + return -EINVAL; + } + if (unlikely((no_of_chans < 1 + || no_of_chans > dma_lch_count))) { + printk(KERN_ERR "Invalid Number of channels requested\n"); + return -EINVAL; + } -void omap_set_lcd_dma_b1_rotation(int rotate) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); - BUG(); - return; + /* + * Allocate a queue to maintain the status of the channels + * in the chain + */ + channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL); + if (channels == NULL) { + printk(KERN_ERR "omap_dma: No memory for channel queue\n"); + return -ENOMEM; } - lcd_dma.rotate = rotate; + + /* request and reserve DMA channels for the chain */ + for (i = 0; i < no_of_chans; i++) { + err = omap_request_dma(dev_id, dev_name, + callback, NULL, &channels[i]); + if (err < 0) { + int j; + for (j = 0; j < i; j++) + omap_free_dma(channels[j]); + kfree(channels); + printk(KERN_ERR "omap_dma: Request failed %d\n", err); + return err; + } + dma_chan[channels[i]].prev_linked_ch = -1; + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + + /* + * Allowing client drivers to set common parameters now, + * so that later only relevant (src_start, dest_start + * and element count) can be set + */ + omap_set_dma_params(channels[i], ¶ms); + } + + *chain_id = channels[0]; + dma_linked_lch[*chain_id].linked_dmach_q = channels; + dma_linked_lch[*chain_id].chain_mode = chain_mode; + dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED; + dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans; + + for (i = 0; i < no_of_chans; i++) + dma_chan[channels[i]].chain_id = *chain_id; + + /* Reset the Queue pointers */ + OMAP_DMA_CHAIN_QINIT(*chain_id); + + /* Set up the chain */ + if (no_of_chans == 1) + create_dma_lch_chain(channels[0], channels[0]); + else { + for (i = 0; i < (no_of_chans - 1); i++) + create_dma_lch_chain(channels[i], channels[i + 1]); + } + + return 0; } +EXPORT_SYMBOL(omap_request_dma_chain); -void omap_set_lcd_dma_b1_mirror(int mirror) +/** + * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the + * params after setting it. Dont do this while dma is running!! + * + * @param chain_id - Chained logical channel id. + * @param params + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params) { - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); - BUG(); + int *channels; + u32 i; + + /* Check for input params */ + if (unlikely((chain_id < 0 + || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; } - lcd_dma.mirror = mirror; + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + channels = dma_linked_lch[chain_id].linked_dmach_q; + + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + /* + * Allowing client drivers to set common parameters now, + * so that later only relevant (src_start, dest_start + * and element count) can be set + */ + omap_set_dma_params(channels[i], ¶ms); + } + + return 0; } +EXPORT_SYMBOL(omap_modify_dma_chain_params); -void omap_set_lcd_dma_b1_vxres(unsigned long vxres) +/** + * @brief omap_free_dma_chain - Free all the logical channels in a chain. + * + * @param chain_id + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_free_dma_chain(int chain_id) { - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " - "in 1510 mode\n"); - BUG(); + int *channels; + u32 i; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; } - lcd_dma.vxres = vxres; + + channels = dma_linked_lch[chain_id].linked_dmach_q; + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + dma_chan[channels[i]].next_linked_ch = -1; + dma_chan[channels[i]].prev_linked_ch = -1; + dma_chan[channels[i]].chain_id = -1; + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + omap_free_dma(channels[i]); + } + + kfree(channels); + + dma_linked_lch[chain_id].linked_dmach_q = NULL; + dma_linked_lch[chain_id].chain_mode = -1; + dma_linked_lch[chain_id].chain_state = -1; + + return (0); } +EXPORT_SYMBOL(omap_free_dma_chain); -void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) +/** + * @brief omap_dma_chain_status - Check if the chain is in + * active / inactive state. + * @param chain_id + * + * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE + * Failure : -EINVAL + */ +int omap_dma_chain_status(int chain_id) { - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); - BUG(); + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; } - lcd_dma.xscale = xscale; - lcd_dma.yscale = yscale; + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + pr_debug("CHAINID=%d, qcnt=%d\n", chain_id, + dma_linked_lch[chain_id].q_count); + + if (OMAP_DMA_CHAIN_QEMPTY(chain_id)) + return OMAP_DMA_CHAIN_INACTIVE; + + return OMAP_DMA_CHAIN_ACTIVE; } +EXPORT_SYMBOL(omap_dma_chain_status); -static void set_b1_regs(void) +/** + * @brief omap_dma_chain_a_transfer - Get a free channel from a chain, + * set the params and start the transfer. + * + * @param chain_id + * @param src_start - buffer start address + * @param dest_start - Dest address + * @param elem_count + * @param frame_count + * @param callbk_data - channel callback parameter data. + * + * @return - Success : 0 + * Failure: -EINVAL/-EBUSY + */ +int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start, + int elem_count, int frame_count, void *callbk_data) { - unsigned long top, bottom; - int es; - u16 w; - unsigned long en, fn; - long ei, fi; - unsigned long vxres; - unsigned int xscale, yscale; - - switch (lcd_dma.data_type) { - case OMAP_DMA_DATA_TYPE_S8: - es = 1; - break; - case OMAP_DMA_DATA_TYPE_S16: - es = 2; - break; - case OMAP_DMA_DATA_TYPE_S32: - es = 4; - break; - default: - BUG(); - return; + int *channels; + u32 l, lch; + int start_dma = 0; + + /* + * if buffer size is less than 1 then there is + * no use of starting the chain + */ + if (elem_count < 1) { + printk(KERN_ERR "Invalid buffer size\n"); + return -EINVAL; } - vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; - xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; - yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; - BUG_ON(vxres < lcd_dma.xres); -#define PIXADDR(x,y) (lcd_dma.addr + ((y) * vxres * yscale + (x) * xscale) * es) -#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) - switch (lcd_dma.rotate) { - case 0: - if (!lcd_dma.mirror) { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - /* 1510 DMA requires the bottom address to be 2 more - * than the actual last memory access location. */ - if (omap_dma_in_1510_mode() && - lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) - bottom += 2; - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 90: - if (!lcd_dma.mirror) { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - case 180: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); - } else { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); + /* Check for input params */ + if (unlikely((chain_id < 0 + || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exist\n"); + return -EINVAL; + } + + /* Check if all the channels in chain are in use */ + if (OMAP_DMA_CHAIN_QFULL(chain_id)) + return -EBUSY; + + /* Frame count may be negative in case of indexed transfers */ + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get a free channel */ + lch = channels[dma_linked_lch[chain_id].q_tail]; + + /* Store the callback data */ + dma_chan[lch].data = callbk_data; + + /* Increment the q_tail */ + OMAP_DMA_CHAIN_INCQTAIL(chain_id); + + /* Set the params to the free channel */ + if (src_start != 0) + p->dma_write(src_start, CSSA, lch); + if (dest_start != 0) + p->dma_write(dest_start, CDSA, lch); + + /* Write the buffer size */ + p->dma_write(elem_count, CEN, lch); + p->dma_write(frame_count, CFN, lch); + + /* + * If the chain is dynamically linked, + * then we may have to start the chain if its not active + */ + if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) { + + /* + * In Dynamic chain, if the chain is not started, + * queue the channel + */ + if (dma_linked_lch[chain_id].chain_state == + DMA_CHAIN_NOTSTARTED) { + /* Enable the link in previous channel */ + if (dma_chan[dma_chan[lch].prev_linked_ch].state == + DMA_CH_QUEUED) + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 270: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); - } else { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); + + /* + * Chain is already started, make sure its active, + * if not then start the chain + */ + else { + start_dma = 1; + + if (dma_chan[dma_chan[lch].prev_linked_ch].state == + DMA_CH_STARTED) { + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + start_dma = 0; + if (0 == ((1 << 7) & p->dma_read( + CCR, dma_chan[lch].prev_linked_ch))) { + disable_lnk(dma_chan[lch]. + prev_linked_ch); + pr_debug("\n prev ch is stopped\n"); + start_dma = 1; + } + } + + else if (dma_chan[dma_chan[lch].prev_linked_ch].state + == DMA_CH_QUEUED) { + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + start_dma = 0; + } + omap_enable_channel_irq(lch); + + l = p->dma_read(CCR, lch); + + if ((0 == (l & (1 << 24)))) + l &= ~(1 << 25); + else + l |= (1 << 25); + if (start_dma == 1) { + if (0 == (l & (1 << 7))) { + l |= (1 << 7); + dma_chan[lch].state = DMA_CH_STARTED; + pr_debug("starting %d\n", lch); + p->dma_write(l, CCR, lch); + } else + start_dma = 0; + } else { + if (0 == (l & (1 << 7))) + p->dma_write(l, CCR, lch); + } + dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - default: - BUG(); - return; /* Supress warning about uninitialized vars */ } - if (omap_dma_in_1510_mode()) { - omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); - omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); - omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); - omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); + return 0; +} +EXPORT_SYMBOL(omap_dma_chain_a_transfer); - return; +/** + * @brief omap_start_dma_chain_transfers - Start the chain + * + * @param chain_id + * + * @return - Success : 0 + * Failure : -EINVAL/-EBUSY + */ +int omap_start_dma_chain_transfers(int chain_id) +{ + int *channels; + u32 l, i; + + if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; } - /* 1610 regs */ - omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); - omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); - omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); - omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); + channels = dma_linked_lch[chain_id].linked_dmach_q; + + if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) { + printk(KERN_ERR "Chain is already started\n"); + return -EBUSY; + } - omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); - omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); + if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) { + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; + i++) { + enable_lnk(channels[i]); + omap_enable_channel_irq(channels[i]); + } + } else { + omap_enable_channel_irq(channels[0]); + } - w = omap_readw(OMAP1610_DMA_LCD_CSDP); - w &= ~0x03; - w |= lcd_dma.data_type; - omap_writew(w, OMAP1610_DMA_LCD_CSDP); + l = p->dma_read(CCR, channels[0]); + l |= (1 << 7); + dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED; + dma_chan[channels[0]].state = DMA_CH_STARTED; - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - /* Always set the source port as SDRAM for now*/ - w &= ~(0x03 << 6); - if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ + if ((0 == (l & (1 << 24)))) + l &= ~(1 << 25); else - w &= ~(1 << 1); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - if (!(lcd_dma.rotate || lcd_dma.mirror || - lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) - return; + l |= (1 << 25); + p->dma_write(l, CCR, channels[0]); - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* Set the double-indexed addressing mode */ - w |= (0x03 << 12); - omap_writew(w, OMAP1610_DMA_LCD_CCR); + dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE; - omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); - omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); - omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); + return 0; } +EXPORT_SYMBOL(omap_start_dma_chain_transfers); -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +/** + * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain. + * + * @param chain_id + * + * @return - Success : 0 + * Failure : EINVAL + */ +int omap_stop_dma_chain_transfers(int chain_id) { - u16 w; + int *channels; + u32 l, i; + u32 sys_cf = 0; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - if (unlikely(!(w & (1 << 3)))) { - printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); - return IRQ_NONE; + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + channels = dma_linked_lch[chain_id].linked_dmach_q; + + if (IS_DMA_ERRATA(DMA_ERRATA_i88)) { + sys_cf = p->dma_read(OCP_SYSCONFIG, 0); + l = sys_cf; + /* Middle mode reg set no Standby */ + l &= ~((1 << 12)|(1 << 13)); + p->dma_write(l, OCP_SYSCONFIG, 0); } - /* Ack the IRQ */ - w |= (1 << 3); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - lcd_dma.active = 0; - if (lcd_dma.callback != NULL) - lcd_dma.callback(w, lcd_dma.cb_data); - return IRQ_HANDLED; + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + + /* Stop the Channel transmission */ + l = p->dma_read(CCR, channels[i]); + l &= ~(1 << 7); + p->dma_write(l, CCR, channels[i]); + + /* Disable the link in all the channels */ + disable_lnk(channels[i]); + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + + } + dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED; + + /* Reset the Queue pointers */ + OMAP_DMA_CHAIN_QINIT(chain_id); + + if (IS_DMA_ERRATA(DMA_ERRATA_i88)) + p->dma_write(sys_cf, OCP_SYSCONFIG, 0); + + return 0; } +EXPORT_SYMBOL(omap_stop_dma_chain_transfers); -int omap_request_lcd_dma(void (* callback)(u16 status, void *data), - void *data) +/* Get the index of the ongoing DMA in chain */ +/** + * @brief omap_get_dma_chain_index - Get the element and frame index + * of the ongoing DMA in chain + * + * @param chain_id + * @param ei - Element index + * @param fi - Frame index + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_get_dma_chain_index(int chain_id, int *ei, int *fi) { - spin_lock_irq(&lcd_dma.lock); - if (lcd_dma.reserved) { - spin_unlock_irq(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA channel already reserved\n"); - BUG(); - return -EBUSY; + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; } - lcd_dma.reserved = 1; - spin_unlock_irq(&lcd_dma.lock); - lcd_dma.callback = callback; - lcd_dma.cb_data = data; - lcd_dma.active = 0; - lcd_dma.single_transfer = 0; - lcd_dma.rotate = 0; - lcd_dma.vxres = 0; - lcd_dma.mirror = 0; - lcd_dma.xscale = 0; - lcd_dma.yscale = 0; - lcd_dma.ext_ctrl = 0; - lcd_dma.src_port = 0; + if ((!ei) || (!fi)) + return -EINVAL; + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + *ei = p->dma_read(CCEN, lch); + *fi = p->dma_read(CCFN, lch); return 0; } +EXPORT_SYMBOL(omap_get_dma_chain_index); -void omap_free_lcd_dma(void) +/** + * @brief omap_get_dma_chain_dst_pos - Get the destination position of the + * ongoing DMA in chain + * + * @param chain_id + * + * @return - Success : Destination position + * Failure : -EINVAL + */ +int omap_get_dma_chain_dst_pos(int chain_id) { - spin_lock(&lcd_dma.lock); - if (!lcd_dma.reserved) { - spin_unlock(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA is not reserved\n"); - BUG(); - return; + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; } - if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); - lcd_dma.reserved = 0; - spin_unlock(&lcd_dma.lock); + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + return p->dma_read(CDAC, lch); } +EXPORT_SYMBOL(omap_get_dma_chain_dst_pos); -void omap_enable_lcd_dma(void) +/** + * @brief omap_get_dma_chain_src_pos - Get the source position + * of the ongoing DMA in chain + * @param chain_id + * + * @return - Success : Destination position + * Failure : -EINVAL + */ +int omap_get_dma_chain_src_pos(int chain_id) { - u16 w; + int lch; + int *channels; - /* Set the Enable bit only if an external controller is - * connected. Otherwise the OMAP internal controller will - * start the transfer when it gets enabled. - */ - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w |= 1 << 8; - omap_writew(w, OMAP1610_DMA_LCD_CTRL); + channels = dma_linked_lch[chain_id].linked_dmach_q; - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w |= 1 << 7; - omap_writew(w, OMAP1610_DMA_LCD_CCR); + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; - lcd_dma.active = 1; + return p->dma_read(CSAC, lch); } +EXPORT_SYMBOL(omap_get_dma_chain_src_pos); +#endif /* ifndef CONFIG_ARCH_OMAP1 */ -void omap_setup_lcd_dma(void) +/*----------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP1 + +static int omap1_dma_handle_ch(int ch) { - BUG_ON(lcd_dma.active); - if (!enable_1510_mode) { - /* Set some reasonable defaults */ - omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); - omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); - omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); - } - set_b1_regs(); - if (!enable_1510_mode) { - u16 w; + u32 csr; - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* If DMA was already active set the end_prog bit to have - * the programmed register set loaded into the active - * register set. - */ - w |= 1 << 11; /* End_prog */ - if (!lcd_dma.single_transfer) - w |= (3 << 8); /* Auto_init, repeat */ - omap_writew(w, OMAP1610_DMA_LCD_CCR); + if (enable_1510_mode && ch >= 6) { + csr = dma_chan[ch].saved_csr; + dma_chan[ch].saved_csr = 0; + } else + csr = p->dma_read(CSR, ch); + if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { + dma_chan[ch + 6].saved_csr = csr >> 7; + csr &= 0x7f; } + if ((csr & 0x3f) == 0) + return 0; + if (unlikely(dma_chan[ch].dev_id == -1)) { + pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n", + ch, csr); + return 0; + } + if (unlikely(csr & OMAP1_DMA_TOUT_IRQ)) + pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id); + if (unlikely(csr & OMAP_DMA_DROP_IRQ)) + pr_warn("DMA synchronization event drop occurred with device %d\n", + dma_chan[ch].dev_id); + if (likely(csr & OMAP_DMA_BLOCK_IRQ)) + dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, csr, dma_chan[ch].data); + + return 1; } -void omap_stop_lcd_dma(void) +static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) { - u16 w; + int ch = ((int) dev_id) - 1; + int handled = 0; - lcd_dma.active = 0; - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; + for (;;) { + int handled_now = 0; - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w &= ~(1 << 7); - omap_writew(w, OMAP1610_DMA_LCD_CCR); + handled_now += omap1_dma_handle_ch(ch); + if (enable_1510_mode && dma_chan[ch + 6].saved_csr) + handled_now += omap1_dma_handle_ch(ch + 6); + if (!handled_now) + break; + handled += handled_now; + } - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); + return handled ? IRQ_HANDLED : IRQ_NONE; } -/* - * Clears any DMA state so the DMA engine is ready to restart with new buffers - * through omap_start_dma(). Any buffers in flight are discarded. - */ -void omap_clear_dma(int lch) +#else +#define omap1_dma_irq_handler NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2PLUS + +static int omap2_dma_handle_ch(int ch) { - unsigned long flags; - int status; + u32 status = p->dma_read(CSR, ch); - local_irq_save(flags); - omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN, - OMAP_DMA_CCR(lch)); - status = OMAP_DMA_CSR(lch); /* clear pending interrupts */ - local_irq_restore(flags); + if (!status) { + if (printk_ratelimit()) + pr_warn("Spurious DMA IRQ for lch %d\n", ch); + p->dma_write(1 << ch, IRQSTATUS_L0, ch); + return 0; + } + if (unlikely(dma_chan[ch].dev_id == -1)) { + if (printk_ratelimit()) + pr_warn("IRQ %04x for non-allocated DMA channel %d\n", + status, ch); + return 0; + } + if (unlikely(status & OMAP_DMA_DROP_IRQ)) + pr_info("DMA synchronization event drop occurred with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) { + printk(KERN_INFO "DMA transaction error with device %d\n", + dma_chan[ch].dev_id); + if (IS_DMA_ERRATA(DMA_ERRATA_i378)) { + u32 ccr; + + ccr = p->dma_read(CCR, ch); + ccr &= ~OMAP_DMA_CCR_EN; + p->dma_write(ccr, CCR, ch); + dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; + } + } + if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ)) + printk(KERN_INFO "DMA secure error with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ)) + printk(KERN_INFO "DMA misaligned error with device %d\n", + dma_chan[ch].dev_id); + + p->dma_write(status, CSR, ch); + p->dma_write(1 << ch, IRQSTATUS_L0, ch); + /* read back the register to flush the write */ + p->dma_read(IRQSTATUS_L0, ch); + + /* If the ch is not chained then chain_id will be -1 */ + if (dma_chan[ch].chain_id != -1) { + int chain_id = dma_chan[ch].chain_id; + dma_chan[ch].state = DMA_CH_NOTSTARTED; + if (p->dma_read(CLNK_CTRL, ch) & (1 << 15)) + dma_chan[dma_chan[ch].next_linked_ch].state = + DMA_CH_STARTED; + if (dma_linked_lch[chain_id].chain_mode == + OMAP_DMA_DYNAMIC_CHAIN) + disable_lnk(ch); + + if (!OMAP_DMA_CHAIN_QEMPTY(chain_id)) + OMAP_DMA_CHAIN_INCQHEAD(chain_id); + + status = p->dma_read(CSR, ch); + p->dma_write(status, CSR, ch); + } + + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, status, dma_chan[ch].data); + + return 0; } -/* - * Returns current physical source address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting - * in incorrect return value. - */ -dma_addr_t omap_get_dma_src_pos(int lch) +/* STATUS register count is from 1-32 while our is 0-31 */ +static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id) { - return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) | - (OMAP_DMA_CSSA_U(lch) << 16)); + u32 val, enable_reg; + int i; + + val = p->dma_read(IRQSTATUS_L0, 0); + if (val == 0) { + if (printk_ratelimit()) + printk(KERN_WARNING "Spurious DMA IRQ\n"); + return IRQ_HANDLED; + } + enable_reg = p->dma_read(IRQENABLE_L0, 0); + val &= enable_reg; /* Dispatch only relevant interrupts */ + for (i = 0; i < dma_lch_count && val != 0; i++) { + if (val & 1) + omap2_dma_handle_ch(i); + val >>= 1; + } + + return IRQ_HANDLED; } +static struct irqaction omap24xx_dma_irq = { + .name = "DMA", + .handler = omap2_dma_irq_handler, +}; + +#else +static struct irqaction omap24xx_dma_irq; +#endif + +/*----------------------------------------------------------------------------*/ + /* - * Returns current physical destination address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting - * in incorrect return value. + * Note that we are currently using only IRQENABLE_L0 and L1. + * As the DSP may be using IRQENABLE_L2 and L3, let's not + * touch those for now. */ -dma_addr_t omap_get_dma_dst_pos(int lch) +void omap_dma_global_context_save(void) { - return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) | - (OMAP_DMA_CDSA_U(lch) << 16)); + omap_dma_global_context.dma_irqenable_l0 = + p->dma_read(IRQENABLE_L0, 0); + omap_dma_global_context.dma_irqenable_l1 = + p->dma_read(IRQENABLE_L1, 0); + omap_dma_global_context.dma_ocp_sysconfig = + p->dma_read(OCP_SYSCONFIG, 0); + omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0); } -int omap_dma_running(void) +void omap_dma_global_context_restore(void) { - int lch; + int ch; + + p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0); + p->dma_write(omap_dma_global_context.dma_ocp_sysconfig, + OCP_SYSCONFIG, 0); + p->dma_write(omap_dma_global_context.dma_irqenable_l0, + IRQENABLE_L0, 0); + p->dma_write(omap_dma_global_context.dma_irqenable_l1, + IRQENABLE_L1, 0); + + if (IS_DMA_ERRATA(DMA_ROMCODE_BUG)) + p->dma_write(0x3 , IRQSTATUS_L0, 0); + + for (ch = 0; ch < dma_chan_count; ch++) + if (dma_chan[ch].dev_id != -1) + omap_clear_dma(ch); +} - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) - return 1; +struct omap_system_dma_plat_info *omap_get_plat_info(void) +{ + return p; +} +EXPORT_SYMBOL_GPL(omap_get_plat_info); - for (lch = 0; lch < dma_chan_count; lch++) { - u16 w; +static int omap_system_dma_probe(struct platform_device *pdev) +{ + int ch, ret = 0; + int dma_irq; + char irq_name[4]; + int irq_rel; + + p = pdev->dev.platform_data; + if (!p) { + dev_err(&pdev->dev, + "%s: System DMA initialized without platform data\n", + __func__); + return -EINVAL; + } - w = omap_readw(OMAP_DMA_CCR(lch)); - if (w & OMAP_DMA_CCR_EN) - return 1; + d = p->dma_attr; + errata = p->errata; + + if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels + && (omap_dma_reserve_channels < d->lch_count)) + d->lch_count = omap_dma_reserve_channels; + + dma_lch_count = d->lch_count; + dma_chan_count = dma_lch_count; + enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + + dma_chan = devm_kcalloc(&pdev->dev, dma_lch_count, + sizeof(struct omap_dma_lch), GFP_KERNEL); + if (!dma_chan) { + dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__); + return -ENOMEM; } - return 0; -} -static int __init omap_init_dma(void) -{ - int ch, r; - - if (cpu_is_omap1510()) { - printk(KERN_INFO "DMA support for OMAP1510 initialized\n"); - dma_chan_count = 9; - enable_1510_mode = 1; - } else if (cpu_is_omap16xx() || cpu_is_omap730()) { - printk(KERN_INFO "OMAP DMA hardware version %d\n", - omap_readw(OMAP_DMA_HW_ID)); - printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", - (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L), - (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L), - omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3), - omap_readw(OMAP_DMA_CAPS_4)); - if (!enable_1510_mode) { - u16 w; - - /* Disable OMAP 3.0/3.1 compatibility mode. */ - w = omap_readw(OMAP_DMA_GSCR); - w |= 1 << 3; - omap_writew(w, OMAP_DMA_GSCR); - dma_chan_count = 16; - } else - dma_chan_count = 9; - } else { - dma_chan_count = 0; - return 0; + + if (dma_omap2plus()) { + dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * + dma_lch_count, GFP_KERNEL); + if (!dma_linked_lch) { + ret = -ENOMEM; + goto exit_dma_lch_fail; + } } - memset(&lcd_dma, 0, sizeof(lcd_dma)); - spin_lock_init(&lcd_dma.lock); spin_lock_init(&dma_chan_lock); - memset(&dma_chan, 0, sizeof(dma_chan)); - for (ch = 0; ch < dma_chan_count; ch++) { + omap_clear_dma(ch); + if (dma_omap2plus()) + omap2_disable_irq_lch(ch); + dma_chan[ch].dev_id = -1; dma_chan[ch].next_lch = -1; if (ch >= 6 && enable_1510_mode) continue; - /* request_irq() doesn't like dev_id (ie. ch) being zero, - * so we have to kludge around this. */ - r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA", - (void *) (ch + 1)); - if (r != 0) { - int i; - - printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n", - dma_irq[ch], r); - for (i = 0; i < ch; i++) - free_irq(dma_irq[i], (void *) (i + 1)); - return r; + if (dma_omap1()) { + /* + * request_irq() doesn't like dev_id (ie. ch) being + * zero, so we have to kludge around this. + */ + sprintf(&irq_name[0], "%d", ch); + dma_irq = platform_get_irq_byname(pdev, irq_name); + + if (dma_irq < 0) { + ret = dma_irq; + goto exit_dma_irq_fail; + } + + /* INT_DMA_LCD is handled in lcd_dma.c */ + if (dma_irq == INT_DMA_LCD) + continue; + + ret = request_irq(dma_irq, + omap1_dma_irq_handler, 0, "DMA", + (void *) (ch + 1)); + if (ret != 0) + goto exit_dma_irq_fail; } } - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL); - if (r != 0) { - int i; - printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(dma_irq[i], (void *) (i + 1)); - return r; + if (d->dev_caps & IS_RW_PRIORITY) + omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, + DMA_DEFAULT_FIFO_DEPTH, 0); + + if (dma_omap2plus()) { + strcpy(irq_name, "0"); + dma_irq = platform_get_irq_byname(pdev, irq_name); + if (dma_irq < 0) { + dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq); + ret = dma_irq; + goto exit_dma_lch_fail; + } + ret = setup_irq(dma_irq, &omap24xx_dma_irq); + if (ret) { + dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n", + dma_irq, ret); + goto exit_dma_lch_fail; + } + } + + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { + pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); + dma_chan[0].dev_id = 0; + dma_chan[1].dev_id = 1; } + p->show_dma_caps(); return 0; + +exit_dma_irq_fail: + dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n", + dma_irq, ret); + for (irq_rel = 0; irq_rel < ch; irq_rel++) { + dma_irq = platform_get_irq(pdev, irq_rel); + free_irq(dma_irq, (void *)(irq_rel + 1)); + } + +exit_dma_lch_fail: + return ret; } -arch_initcall(omap_init_dma); +static int omap_system_dma_remove(struct platform_device *pdev) +{ + int dma_irq; + if (dma_omap2plus()) { + char irq_name[4]; + strcpy(irq_name, "0"); + dma_irq = platform_get_irq_byname(pdev, irq_name); + remove_irq(dma_irq, &omap24xx_dma_irq); + } else { + int irq_rel = 0; + for ( ; irq_rel < dma_chan_count; irq_rel++) { + dma_irq = platform_get_irq(pdev, irq_rel); + free_irq(dma_irq, (void *)(irq_rel + 1)); + } + } + return 0; +} -EXPORT_SYMBOL(omap_get_dma_src_pos); -EXPORT_SYMBOL(omap_get_dma_dst_pos); -EXPORT_SYMBOL(omap_clear_dma); -EXPORT_SYMBOL(omap_set_dma_priority); -EXPORT_SYMBOL(omap_request_dma); -EXPORT_SYMBOL(omap_free_dma); -EXPORT_SYMBOL(omap_start_dma); -EXPORT_SYMBOL(omap_stop_dma); -EXPORT_SYMBOL(omap_enable_dma_irq); -EXPORT_SYMBOL(omap_disable_dma_irq); +static struct platform_driver omap_system_dma_driver = { + .probe = omap_system_dma_probe, + .remove = omap_system_dma_remove, + .driver = { + .name = "omap_dma_system" + }, +}; -EXPORT_SYMBOL(omap_set_dma_transfer_params); -EXPORT_SYMBOL(omap_set_dma_color_mode); +static int __init omap_system_dma_init(void) +{ + return platform_driver_register(&omap_system_dma_driver); +} +arch_initcall(omap_system_dma_init); -EXPORT_SYMBOL(omap_set_dma_src_params); -EXPORT_SYMBOL(omap_set_dma_src_index); -EXPORT_SYMBOL(omap_set_dma_src_data_pack); -EXPORT_SYMBOL(omap_set_dma_src_burst_mode); +static void __exit omap_system_dma_exit(void) +{ + platform_driver_unregister(&omap_system_dma_driver); +} -EXPORT_SYMBOL(omap_set_dma_dest_params); -EXPORT_SYMBOL(omap_set_dma_dest_index); -EXPORT_SYMBOL(omap_set_dma_dest_data_pack); -EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); +MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Texas Instruments Inc"); -EXPORT_SYMBOL(omap_dma_link_lch); -EXPORT_SYMBOL(omap_dma_unlink_lch); +/* + * Reserve the omap SDMA channels using cmdline bootarg + * "omap_dma_reserve_ch=". The valid range is 1 to 32 + */ +static int __init omap_dma_cmdline_reserve_ch(char *str) +{ + if (get_option(&str, &omap_dma_reserve_channels) != 1) + omap_dma_reserve_channels = 0; + return 1; +} + +__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch); -EXPORT_SYMBOL(omap_request_lcd_dma); -EXPORT_SYMBOL(omap_free_lcd_dma); -EXPORT_SYMBOL(omap_enable_lcd_dma); -EXPORT_SYMBOL(omap_setup_lcd_dma); -EXPORT_SYMBOL(omap_stop_lcd_dma); -EXPORT_SYMBOL(omap_set_lcd_dma_b1); -EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); -EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); -EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); -EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); -EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); -EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); |