1 files changed, 0 insertions, 336 deletions
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
deleted file mode 100644
index fc819120978..00000000000
--- a/arch/arm/plat-omap/devices.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/devices.c
- *
- * Common platform device setup/initialization for OMAP1 and OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/memblock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mmc.h>
-#include <mach/gpio.h>
-#include <plat/menelaus.h>
-#include <plat/mcbsp.h>
-#include <plat/omap44xx.h>
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
-
-static struct platform_device **omap_mcbsp_devices;
-
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
-					int size)
-{
-	int i;
-
-	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
-				     GFP_KERNEL);
-	if (!omap_mcbsp_devices) {
-		printk(KERN_ERR "Could not register McBSP devices\n");
-		return;
-	}
-
-	for (i = 0; i < size; i++) {
-		struct platform_device *new_mcbsp;
-		int ret;
-
-		new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
-		if (!new_mcbsp)
-			continue;
-		new_mcbsp->dev.platform_data = &config[i];
-		ret = platform_device_add(new_mcbsp);
-		if (ret) {
-			platform_device_put(new_mcbsp);
-			continue;
-		}
-		omap_mcbsp_devices[i] = new_mcbsp;
-	}
-}
-
-#else
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
-					int size)
-{  }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
-		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static struct resource mcpdm_resources[] = {
-	{
-		.name		= "mcpdm_mem",
-		.start		= OMAP44XX_MCPDM_BASE,
-		.end		= OMAP44XX_MCPDM_BASE + SZ_4K,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.name		= "mcpdm_irq",
-		.start		= OMAP44XX_IRQ_MCPDM,
-		.end		= OMAP44XX_IRQ_MCPDM,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_mcpdm_device = {
-	.name		= "omap-mcpdm",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mcpdm_resources),
-	.resource	= mcpdm_resources,
-};
-
-static void omap_init_mcpdm(void)
-{
-	(void) platform_device_register(&omap_mcpdm_device);
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-#define OMAP_MMC_NR_RES		2
-
-/*
- * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
- */
-int __init omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	struct platform_device *pdev;
-	struct resource res[OMAP_MMC_NR_RES];
-	int ret;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		return -ENOMEM;
-
-	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
-	res[0].start = base;
-	res[0].end = base + size - 1;
-	res[0].flags = IORESOURCE_MEM;
-	res[1].start = res[1].end = irq;
-	res[1].flags = IORESOURCE_IRQ;
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret == 0)
-		ret = platform_device_add_data(pdev, data, sizeof(*data));
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
-
-	/* return device handle to board setup code */
-	data->dev = &pdev->dev;
-	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-#define	OMAP_RNG_BASE		0x480A0000
-#else
-#define	OMAP_RNG_BASE		0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
-	{
-		.start		= OMAP_RNG_BASE,
-		.end		= OMAP_RNG_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_rng_device = {
-	.name		= "omap_rng",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rng_resources),
-	.resource	= rng_resources,
-};
-
-static void omap_init_rng(void)
-{
-	(void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* Numbering for the SPI-capable controllers when used for SPI:
- * spi		= 1
- * uwire	= 2
- * mmc1..2	= 3..4
- * mcbsp1..3	= 5..7
- */
-
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
-
-#define	OMAP_UWIRE_BASE		0xfffb3000
-
-static struct resource uwire_resources[] = {
-	{
-		.start		= OMAP_UWIRE_BASE,
-		.end		= OMAP_UWIRE_BASE + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_uwire_device = {
-	.name	   = "omap_uwire",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(uwire_resources),
-	.resource	= uwire_resources,
-};
-
-static void omap_init_uwire(void)
-{
-	/* FIXME define and use a boot tag; not all boards will be hooking
-	 * up devices to the microwire controller, and multi-board configs
-	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
-	 */
-
-	/* board-specific code must configure chipselects (only a few
-	 * are normally used) and SCLK/SDI/SDO (each has two choices).
-	 */
-	(void) platform_device_register(&omap_uwire_device);
-}
-#else
-static inline void omap_init_uwire(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-
-static struct resource wdt_resources[] = {
-	{
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_wdt_device = {
-	.name	   = "omap_wdt",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static void omap_init_wdt(void)
-{
-	if (cpu_is_omap16xx())
-		wdt_resources[0].start = 0xfffeb000;
-	else if (cpu_is_omap2420())
-		wdt_resources[0].start = 0x48022000; /* WDT2 */
-	else if (cpu_is_omap2430())
-		wdt_resources[0].start = 0x49016000; /* WDT2 */
-	else if (cpu_is_omap343x())
-		wdt_resources[0].start = 0x48314000; /* WDT2 */
-	else if (cpu_is_omap44xx())
-		wdt_resources[0].start = 0x4a314000;
-	else
-		return;
-
-	wdt_resources[0].end = wdt_resources[0].start + 0x4f;
-
-	(void) platform_device_register(&omap_wdt_device);
-}
-#else
-static inline void omap_init_wdt(void) {}
-#endif
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-
-static phys_addr_t omap_dsp_phys_mempool_base;
-
-void __init omap_dsp_reserve_sdram_memblock(void)
-{
-	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-	phys_addr_t paddr;
-
-	if (!size)
-		return;
-
-	paddr = memblock_alloc(size, SZ_1M);
-	if (!paddr) {
-		pr_err("%s: failed to reserve %x bytes\n",
-				__func__, size);
-		return;
-	}
-	memblock_free(paddr, size);
-	memblock_remove(paddr, size);
-
-	omap_dsp_phys_mempool_base = paddr;
-}
-
-phys_addr_t omap_dsp_get_mempool_base(void)
-{
-	return omap_dsp_phys_mempool_base;
-}
-EXPORT_SYMBOL(omap_dsp_get_mempool_base);
-#endif
-
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- *  (a) Does any "standard config" pin muxing needed.  Board-specific
- *	code will have muxed GPIO pins and done "nonstandard" setup;
- *	that code could live in the boot loader.
- *  (b) Populating board-specific platform_data with the data drivers
- *	rely on to handle wiring variations.
- *  (c) Creating platform devices as meaningful on this board and
- *	with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers.  So is responding to probe().
- *
- * Board-specific knowlege like creating devices or pin setup is to be
- * kept out of drivers as much as possible.  In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap_init_devices(void)
-{
-	/* please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	omap_init_rng();
-	omap_init_mcpdm();
-	omap_init_uwire();
-	return 0;
-}
-arch_initcall(omap_init_devices);