diff options
Diffstat (limited to 'arch/arm/plat-omap/devices.c')
| -rw-r--r-- | arch/arm/plat-omap/devices.c | 544 |
1 files changed, 0 insertions, 544 deletions
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c deleted file mode 100644 index 01da719a745..00000000000 --- a/arch/arm/plat-omap/devices.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * linux/arch/arm/plat-omap/devices.c - * - * Common platform device setup/initialization for OMAP1 and OMAP2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> -#include <asm/io.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> - -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/mmc.h> -#include <mach/mux.h> -#include <mach/gpio.h> -#include <mach/menelaus.h> -#include <mach/mcbsp.h> - -#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) - -#include "../plat-omap/dsp/dsp_common.h" - -static struct dsp_platform_data dsp_pdata = { - .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list), -}; - -static struct resource omap_dsp_resources[] = { - { - .name = "dsp_mmu", - .start = -1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device omap_dsp_device = { - .name = "dsp", - .id = -1, - .num_resources = ARRAY_SIZE(omap_dsp_resources), - .resource = omap_dsp_resources, - .dev = { - .platform_data = &dsp_pdata, - }, -}; - -static inline void omap_init_dsp(void) -{ - struct resource *res; - int irq; - - if (cpu_is_omap15xx()) - irq = INT_1510_DSP_MMU; - else if (cpu_is_omap16xx()) - irq = INT_1610_DSP_MMU; - else if (cpu_is_omap24xx()) - irq = INT_24XX_DSP_MMU; - - res = platform_get_resource_byname(&omap_dsp_device, - IORESOURCE_IRQ, "dsp_mmu"); - res->start = irq; - - platform_device_register(&omap_dsp_device); -} - -int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev) -{ - static DEFINE_MUTEX(dsp_pdata_lock); - - mutex_init(&kdev->lock); - - mutex_lock(&dsp_pdata_lock); - list_add_tail(&kdev->entry, &dsp_pdata.kdev_list); - mutex_unlock(&dsp_pdata_lock); - - return 0; -} -EXPORT_SYMBOL(dsp_kfunc_device_register); - -#else -static inline void omap_init_dsp(void) { } -#endif /* CONFIG_OMAP_DSP */ - -/*-------------------------------------------------------------------------*/ -#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) - -static void omap_init_kp(void) -{ - if (machine_is_omap_h2() || machine_is_omap_h3()) { - omap_cfg_reg(F18_1610_KBC0); - omap_cfg_reg(D20_1610_KBC1); - omap_cfg_reg(D19_1610_KBC2); - omap_cfg_reg(E18_1610_KBC3); - omap_cfg_reg(C21_1610_KBC4); - - omap_cfg_reg(G18_1610_KBR0); - omap_cfg_reg(F19_1610_KBR1); - omap_cfg_reg(H14_1610_KBR2); - omap_cfg_reg(E20_1610_KBR3); - omap_cfg_reg(E19_1610_KBR4); - omap_cfg_reg(N19_1610_KBR5); - } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - omap_cfg_reg(E2_730_KBR0); - omap_cfg_reg(J7_730_KBR1); - omap_cfg_reg(E1_730_KBR2); - omap_cfg_reg(F3_730_KBR3); - omap_cfg_reg(D2_730_KBR4); - - omap_cfg_reg(C2_730_KBC0); - omap_cfg_reg(D3_730_KBC1); - omap_cfg_reg(E4_730_KBC2); - omap_cfg_reg(F4_730_KBC3); - omap_cfg_reg(E3_730_KBC4); - } else if (machine_is_omap_h4()) { - omap_cfg_reg(T19_24XX_KBR0); - omap_cfg_reg(R19_24XX_KBR1); - omap_cfg_reg(V18_24XX_KBR2); - omap_cfg_reg(M21_24XX_KBR3); - omap_cfg_reg(E5__24XX_KBR4); - if (omap_has_menelaus()) { - omap_cfg_reg(B3__24XX_KBR5); - omap_cfg_reg(AA4_24XX_KBC2); - omap_cfg_reg(B13_24XX_KBC6); - } else { - omap_cfg_reg(M18_24XX_KBR5); - omap_cfg_reg(H19_24XX_KBC2); - omap_cfg_reg(N19_24XX_KBC6); - } - omap_cfg_reg(R20_24XX_KBC0); - omap_cfg_reg(M14_24XX_KBC1); - omap_cfg_reg(V17_24XX_KBC3); - omap_cfg_reg(P21_24XX_KBC4); - omap_cfg_reg(L14_24XX_KBC5); - } -} -#else -static inline void omap_init_kp(void) {} -#endif - -/*-------------------------------------------------------------------------*/ -#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE) - -static struct platform_device **omap_mcbsp_devices; - -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size) -{ - int i; - - if (size > OMAP_MAX_MCBSP_COUNT) { - printk(KERN_WARNING "Registered too many McBSPs platform_data." - " Using maximum (%d) available.\n", - OMAP_MAX_MCBSP_COUNT); - size = OMAP_MAX_MCBSP_COUNT; - } - - omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), - GFP_KERNEL); - if (!omap_mcbsp_devices) { - printk(KERN_ERR "Could not register McBSP devices\n"); - return; - } - - for (i = 0; i < size; i++) { - struct platform_device *new_mcbsp; - int ret; - - new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1); - if (!new_mcbsp) - continue; - new_mcbsp->dev.platform_data = &config[i]; - ret = platform_device_add(new_mcbsp); - if (ret) { - platform_device_put(new_mcbsp); - continue; - } - omap_mcbsp_devices[i] = new_mcbsp; - } -} - -#else -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size) -{ } -#endif - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) - -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) -#define OMAP_MMC1_BASE 0x4809c000 -#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc) -#define OMAP_MMC1_INT INT_24XX_MMC_IRQ - -#define OMAP_MMC2_BASE 0x480b4000 -#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc) -#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ - -#else - -#define OMAP_MMC1_BASE 0xfffb7800 -#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f) -#define OMAP_MMC1_INT INT_MMC - -#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ -#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f) -#define OMAP_MMC2_INT INT_1610_MMC2 - -#endif - -static struct omap_mmc_platform_data mmc1_data; - -static u64 mmc1_dmamask = 0xffffffff; - -static struct resource mmc1_resources[] = { - { - .start = OMAP_MMC1_BASE, - .end = OMAP_MMC1_END, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_MMC1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device1 = { - .name = "mmci-omap", - .id = 1, - .dev = { - .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_data, - }, - .num_resources = ARRAY_SIZE(mmc1_resources), - .resource = mmc1_resources, -}; - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ - defined(CONFIG_ARCH_OMAP34XX) - -static struct omap_mmc_platform_data mmc2_data; - -static u64 mmc2_dmamask = 0xffffffff; - -static struct resource mmc2_resources[] = { - { - .start = OMAP_MMC2_BASE, - .end = OMAP_MMC2_END, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_MMC2_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device2 = { - .name = "mmci-omap", - .id = 2, - .dev = { - .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_data, - }, - .num_resources = ARRAY_SIZE(mmc2_resources), - .resource = mmc2_resources, -}; -#endif - -static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf) -{ - if (cpu_is_omap2430() || cpu_is_omap34xx()) - return; - - if (mmc_conf->mmc[0].enabled) { - if (cpu_is_omap24xx()) { - omap_cfg_reg(H18_24XX_MMC_CMD); - omap_cfg_reg(H15_24XX_MMC_CLKI); - omap_cfg_reg(G19_24XX_MMC_CLKO); - omap_cfg_reg(F20_24XX_MMC_DAT0); - omap_cfg_reg(F19_24XX_MMC_DAT_DIR0); - omap_cfg_reg(G18_24XX_MMC_CMD_DIR); - } else { - omap_cfg_reg(MMC_CMD); - omap_cfg_reg(MMC_CLK); - omap_cfg_reg(MMC_DAT0); - if (cpu_is_omap1710()) { - omap_cfg_reg(M15_1710_MMC_CLKI); - omap_cfg_reg(P19_1710_MMC_CMDDIR); - omap_cfg_reg(P20_1710_MMC_DATDIR0); - } - } - if (mmc_conf->mmc[0].wire4) { - if (cpu_is_omap24xx()) { - omap_cfg_reg(H14_24XX_MMC_DAT1); - omap_cfg_reg(E19_24XX_MMC_DAT2); - omap_cfg_reg(D19_24XX_MMC_DAT3); - omap_cfg_reg(E20_24XX_MMC_DAT_DIR1); - omap_cfg_reg(F18_24XX_MMC_DAT_DIR2); - omap_cfg_reg(E18_24XX_MMC_DAT_DIR3); - } else { - omap_cfg_reg(MMC_DAT1); - /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc_conf->mmc[0].nomux) - omap_cfg_reg(MMC_DAT2); - omap_cfg_reg(MMC_DAT3); - } - } - } - -#ifdef CONFIG_ARCH_OMAP16XX - /* block 2 is on newer chips, and has many pinout options */ - if (mmc_conf->mmc[1].enabled) { - if (!mmc_conf->mmc[1].nomux) { - omap_cfg_reg(Y8_1610_MMC2_CMD); - omap_cfg_reg(Y10_1610_MMC2_CLK); - omap_cfg_reg(R18_1610_MMC2_CLKIN); - omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc_conf->mmc[1].wire4) { - omap_cfg_reg(V8_1610_MMC2_DAT1); - omap_cfg_reg(W15_1610_MMC2_DAT2); - omap_cfg_reg(R10_1610_MMC2_DAT3); - } - - /* These are needed for the level shifter */ - omap_cfg_reg(V9_1610_MMC2_CMDDIR); - omap_cfg_reg(V5_1610_MMC2_DATDIR0); - omap_cfg_reg(W19_1610_MMC2_DATDIR1); - } - - /* Feedback clock must be set on OMAP-1710 MMC2 */ - if (cpu_is_omap1710()) - omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), - MOD_CONF_CTRL_1); - } -#endif -} - -static void __init omap_init_mmc(void) -{ - const struct omap_mmc_config *mmc_conf; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) - return; - - omap_init_mmc_conf(mmc_conf); - - if (mmc_conf->mmc[0].enabled) { - mmc1_data.conf = mmc_conf->mmc[0]; - (void) platform_device_register(&mmc_omap_device1); - } - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ - defined(CONFIG_ARCH_OMAP34XX) - if (mmc_conf->mmc[1].enabled) { - mmc2_data.conf = mmc_conf->mmc[1]; - (void) platform_device_register(&mmc_omap_device2); - } -#endif -} - -void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) -{ - switch (host) { - case 1: - mmc1_data = *info; - break; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ - defined(CONFIG_ARCH_OMAP34XX) - case 2: - mmc2_data = *info; - break; -#endif - default: - BUG(); - } -} - -#else -static inline void omap_init_mmc(void) {} -void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {} -#endif - -/*-------------------------------------------------------------------------*/ - -/* Numbering for the SPI-capable controllers when used for SPI: - * spi = 1 - * uwire = 2 - * mmc1..2 = 3..4 - * mcbsp1..3 = 5..7 - */ - -#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) - -#define OMAP_UWIRE_BASE 0xfffb3000 - -static struct resource uwire_resources[] = { - { - .start = OMAP_UWIRE_BASE, - .end = OMAP_UWIRE_BASE + 0x20, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_uwire_device = { - .name = "omap_uwire", - .id = -1, - .num_resources = ARRAY_SIZE(uwire_resources), - .resource = uwire_resources, -}; - -static void omap_init_uwire(void) -{ - /* FIXME define and use a boot tag; not all boards will be hooking - * up devices to the microwire controller, and multi-board configs - * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... - */ - - /* board-specific code must configure chipselects (only a few - * are normally used) and SCLK/SDI/SDO (each has two choices). - */ - (void) platform_device_register(&omap_uwire_device); -} -#else -static inline void omap_init_uwire(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_WDT_BASE 0x48022000 -#else -#define OMAP_WDT_BASE 0xfffeb000 -#endif - -static struct resource wdt_resources[] = { - { - .start = OMAP_WDT_BASE, - .end = OMAP_WDT_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - -/* - * This gets called after board-specific INIT_MACHINE, and initializes most - * on-chip peripherals accessible on this board (except for few like USB): - * - * (a) Does any "standard config" pin muxing needed. Board-specific - * code will have muxed GPIO pins and done "nonstandard" setup; - * that code could live in the boot loader. - * (b) Populating board-specific platform_data with the data drivers - * rely on to handle wiring variations. - * (c) Creating platform devices as meaningful on this board and - * with this kernel configuration. - * - * Claiming GPIOs, and setting their direction and initial values, is the - * responsibility of the device drivers. So is responding to probe(). - * - * Board-specific knowlege like creating devices or pin setup is to be - * kept out of drivers as much as possible. In particular, pin setup - * may be handled by the boot loader, and drivers should expect it will - * normally have been done by the time they're probed. - */ -static int __init omap_init_devices(void) -{ -/* - * Need to enable relevant once for 2430 SDP - */ -#ifndef CONFIG_MACH_OMAP_2430SDP - /* please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_dsp(); - omap_init_kp(); - omap_init_mmc(); - omap_init_uwire(); - omap_init_wdt(); - omap_init_rng(); -#endif - return 0; -} -arch_initcall(omap_init_devices); |