diff options
Diffstat (limited to 'arch/arm/plat-omap/devices.c')
| -rw-r--r-- | arch/arm/plat-omap/devices.c | 381 |
1 files changed, 0 insertions, 381 deletions
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c deleted file mode 100644 index 9dcce904b60..00000000000 --- a/arch/arm/plat-omap/devices.c +++ /dev/null @@ -1,381 +0,0 @@ -/* - * linux/arch/arm/plat-omap/devices.c - * - * Common platform device setup/initialization for OMAP1 and OMAP2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> - -#include <asm/arch/tc.h> -#include <asm/arch/board.h> -#include <asm/arch/mux.h> -#include <asm/arch/gpio.h> - - -void omap_nop_release(struct device *dev) -{ - /* Nothing */ -} - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP2_I2C_BASE1 0x48070000 -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_INT INT_I2C -#define OMAP2_I2C_INT1 56 - -static struct resource i2c_resources1[] = { - { - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -/* DMA not used; works around erratum writing to non-empty i2c fifo */ - -static struct platform_device omap_i2c_device1 = { - .name = "i2c_omap", - .id = 1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(i2c_resources1), - .resource = i2c_resources1, -}; - -/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */ -static void omap_init_i2c(void) -{ - if (cpu_is_omap24xx()) { - i2c_resources1[0].start = OMAP2_I2C_BASE1; - i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE; - i2c_resources1[1].start = OMAP2_I2C_INT1; - } else { - i2c_resources1[0].start = OMAP1_I2C_BASE; - i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE; - i2c_resources1[1].start = OMAP1_I2C_INT; - } - - /* FIXME define and use a boot tag, in case of boards that - * either don't wire up I2C, or chips that mux it differently... - * it can include clocking and address info, maybe more. - */ - if (cpu_is_omap24xx()) { - omap_cfg_reg(M19_24XX_I2C1_SCL); - omap_cfg_reg(L15_24XX_I2C1_SDA); - } else { - omap_cfg_reg(I2C_SCL); - omap_cfg_reg(I2C_SDA); - } - - (void) platform_device_register(&omap_i2c_device1); -} - -#else -static inline void omap_init_i2c(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_MMC1_BASE 0x4809c000 -#define OMAP_MMC1_INT 83 -#else -#define OMAP_MMC1_BASE 0xfffb7800 -#define OMAP_MMC1_INT INT_MMC -#endif -#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -static struct omap_mmc_conf mmc1_conf; - -static u64 mmc1_dmamask = 0xffffffff; - -static struct resource mmc1_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC1_BASE), - .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_MMC1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device1 = { - .name = "mmci-omap", - .id = 1, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_conf, - }, - .num_resources = ARRAY_SIZE(mmc1_resources), - .resource = mmc1_resources, -}; - -#ifdef CONFIG_ARCH_OMAP16XX - -static struct omap_mmc_conf mmc2_conf; - -static u64 mmc2_dmamask = 0xffffffff; - -static struct resource mmc2_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC2_BASE), - .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_1610_MMC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device2 = { - .name = "mmci-omap", - .id = 2, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_conf, - }, - .num_resources = ARRAY_SIZE(mmc2_resources), - .resource = mmc2_resources, -}; -#endif - -static void __init omap_init_mmc(void) -{ - const struct omap_mmc_config *mmc_conf; - const struct omap_mmc_conf *mmc; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) - return; - - /* block 1 is always available and has just one pinout option */ - mmc = &mmc_conf->mmc[0]; - if (mmc->enabled) { - if (!cpu_is_omap24xx()) { - omap_cfg_reg(MMC_CMD); - omap_cfg_reg(MMC_CLK); - omap_cfg_reg(MMC_DAT0); - if (cpu_is_omap1710()) { - omap_cfg_reg(M15_1710_MMC_CLKI); - omap_cfg_reg(P19_1710_MMC_CMDDIR); - omap_cfg_reg(P20_1710_MMC_DATDIR0); - } - } - if (mmc->wire4) { - if (!cpu_is_omap24xx()) { - omap_cfg_reg(MMC_DAT1); - /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc->nomux) - omap_cfg_reg(MMC_DAT2); - omap_cfg_reg(MMC_DAT3); - } - } - mmc1_conf = *mmc; - (void) platform_device_register(&mmc_omap_device1); - } - -#ifdef CONFIG_ARCH_OMAP16XX - /* block 2 is on newer chips, and has many pinout options */ - mmc = &mmc_conf->mmc[1]; - if (mmc->enabled) { - if (!mmc->nomux) { - omap_cfg_reg(Y8_1610_MMC2_CMD); - omap_cfg_reg(Y10_1610_MMC2_CLK); - omap_cfg_reg(R18_1610_MMC2_CLKIN); - omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc->wire4) { - omap_cfg_reg(V8_1610_MMC2_DAT1); - omap_cfg_reg(W15_1610_MMC2_DAT2); - omap_cfg_reg(R10_1610_MMC2_DAT3); - } - - /* These are needed for the level shifter */ - omap_cfg_reg(V9_1610_MMC2_CMDDIR); - omap_cfg_reg(V5_1610_MMC2_DATDIR0); - omap_cfg_reg(W19_1610_MMC2_DATDIR1); - } - - /* Feedback clock must be set on OMAP-1710 MMC2 */ - if (cpu_is_omap1710()) - omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), - MOD_CONF_CTRL_1); - mmc2_conf = *mmc; - (void) platform_device_register(&mmc_omap_device2); - } -#endif - return; -} -#else -static inline void omap_init_mmc(void) {} -#endif - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_WDT_BASE 0x48022000 -#else -#define OMAP_WDT_BASE 0xfffeb000 -#endif - -static struct resource wdt_resources[] = { - { - .start = OMAP_WDT_BASE, - .end = OMAP_WDT_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP_RNG) || defined(CONFIG_OMAP_RNG_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - -#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) - -static struct omap_lcd_config omap_fb_conf; - -static u64 omap_fb_dma_mask = ~(u32)0; - -static struct platform_device omap_fb_device = { - .name = "omapfb", - .id = -1, - .dev = { - .release = omap_nop_release, - .dma_mask = &omap_fb_dma_mask, - .coherent_dma_mask = ~(u32)0, - .platform_data = &omap_fb_conf, - }, - .num_resources = 0, -}; - -static inline void omap_init_fb(void) -{ - const struct omap_lcd_config *conf; - - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf != NULL) - omap_fb_conf = *conf; - platform_device_register(&omap_fb_device); -} - -#else - -static inline void omap_init_fb(void) {} - -#endif - -/* - * This gets called after board-specific INIT_MACHINE, and initializes most - * on-chip peripherals accessible on this board (except for few like USB): - * - * (a) Does any "standard config" pin muxing needed. Board-specific - * code will have muxed GPIO pins and done "nonstandard" setup; - * that code could live in the boot loader. - * (b) Populating board-specific platform_data with the data drivers - * rely on to handle wiring variations. - * (c) Creating platform devices as meaningful on this board and - * with this kernel configuration. - * - * Claiming GPIOs, and setting their direction and initial values, is the - * responsibility of the device drivers. So is responding to probe(). - * - * Board-specific knowlege like creating devices or pin setup is to be - * kept out of drivers as much as possible. In particular, pin setup - * may be handled by the boot loader, and drivers should expect it will - * normally have been done by the time they're probed. - */ -static int __init omap_init_devices(void) -{ - /* please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_fb(); - omap_init_i2c(); - omap_init_mmc(); - omap_init_wdt(); - omap_init_rng(); - - return 0; -} -arch_initcall(omap_init_devices); - |