diff options
Diffstat (limited to 'arch/arm/plat-nomadik')
| -rw-r--r-- | arch/arm/plat-nomadik/Kconfig | 27 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/Makefile | 6 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/gpio.c | 687 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/gpio.h | 87 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/i2c.h | 37 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/mtu.h | 54 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/pincfg.h | 104 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/ske.h | 50 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/ste_dma40.h | 226 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/timer.c | 186 |
10 files changed, 0 insertions, 1464 deletions
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig deleted file mode 100644 index 5da3f97c537..00000000000 --- a/arch/arm/plat-nomadik/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -# We keep common IP's here for Nomadik and other similar -# familiy of processors from ST-Ericsson. At the moment we have -# just MTU, others to follow soon. - -config PLAT_NOMADIK - bool - depends on ARCH_NOMADIK || ARCH_U8500 - default y - help - Common platform code for Nomadik and other ST-Ericsson - platforms. - -if PLAT_NOMADIK - -config HAS_MTU - bool - help - Support for Multi Timer Unit. MTU provides access - to multiple interrupt generating programmable - 32-bit free running decrementing counters. - -config NOMADIK_GPIO - bool - help - Support for the Nomadik GPIO controller. - -endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile deleted file mode 100644 index c33547361bd..00000000000 --- a/arch/arm/plat-nomadik/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# arch/arm/plat-nomadik/Makefile -# Copyright 2009 ST-Ericsson -# Licensed under GPLv2 - -obj-$(CONFIG_HAS_MTU) += timer.o -obj-$(CONFIG_NOMADIK_GPIO) += gpio.o diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c deleted file mode 100644 index 85e6fd212a4..00000000000 --- a/arch/arm/plat-nomadik/gpio.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * Generic GPIO driver for logic cells found in the Nomadik SoC - * - * Copyright (C) 2008,2009 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/gpio.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/slab.h> - -#include <plat/pincfg.h> -#include <mach/hardware.h> -#include <mach/gpio.h> - -/* - * The GPIO module in the Nomadik family of Systems-on-Chip is an - * AMBA device, managing 32 pins and alternate functions. The logic block - * is currently only used in the Nomadik. - * - * Symbols in this file are called "nmk_gpio" for "nomadik gpio" - */ - -#define NMK_GPIO_PER_CHIP 32 -struct nmk_gpio_chip { - struct gpio_chip chip; - void __iomem *addr; - struct clk *clk; - unsigned int parent_irq; - spinlock_t lock; - /* Keep track of configured edges */ - u32 edge_rising; - u32 edge_falling; -}; - -static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int gpio_mode) -{ - u32 bit = 1 << offset; - u32 afunc, bfunc; - - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; - if (gpio_mode & NMK_GPIO_ALT_A) - afunc |= bit; - if (gpio_mode & NMK_GPIO_ALT_B) - bfunc |= bit; - writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); - writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); -} - -static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, - unsigned offset, enum nmk_gpio_slpm mode) -{ - u32 bit = 1 << offset; - u32 slpm; - - slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); - if (mode == NMK_GPIO_SLPM_NOCHANGE) - slpm |= bit; - else - slpm &= ~bit; - writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); -} - -static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, - unsigned offset, enum nmk_gpio_pull pull) -{ - u32 bit = 1 << offset; - u32 pdis; - - pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); - if (pull == NMK_GPIO_PULL_NONE) - pdis |= bit; - else - pdis &= ~bit; - writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); - - if (pull == NMK_GPIO_PULL_UP) - writel(bit, nmk_chip->addr + NMK_GPIO_DATS); - else if (pull == NMK_GPIO_PULL_DOWN) - writel(bit, nmk_chip->addr + NMK_GPIO_DATC); -} - -static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, - unsigned offset) -{ - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); -} - -static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int val) -{ - if (val) - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); - else - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); -} - -static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int val) -{ - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - __nmk_gpio_set_output(nmk_chip, offset, val); -} - -static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, - pin_cfg_t cfg) -{ - static const char *afnames[] = { - [NMK_GPIO_ALT_GPIO] = "GPIO", - [NMK_GPIO_ALT_A] = "A", - [NMK_GPIO_ALT_B] = "B", - [NMK_GPIO_ALT_C] = "C" - }; - static const char *pullnames[] = { - [NMK_GPIO_PULL_NONE] = "none", - [NMK_GPIO_PULL_UP] = "up", - [NMK_GPIO_PULL_DOWN] = "down", - [3] /* illegal */ = "??" - }; - static const char *slpmnames[] = { - [NMK_GPIO_SLPM_INPUT] = "input/wakeup", - [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", - }; - - int pin = PIN_NUM(cfg); - int pull = PIN_PULL(cfg); - int af = PIN_ALT(cfg); - int slpm = PIN_SLPM(cfg); - int output = PIN_DIR(cfg); - int val = PIN_VAL(cfg); - - dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n", - pin, afnames[af], pullnames[pull], slpmnames[slpm], - output ? "output " : "input", - output ? (val ? "high" : "low") : ""); - - if (output) - __nmk_gpio_make_output(nmk_chip, offset, val); - else { - __nmk_gpio_make_input(nmk_chip, offset); - __nmk_gpio_set_pull(nmk_chip, offset, pull); - } - - __nmk_gpio_set_slpm(nmk_chip, offset, slpm); - __nmk_gpio_set_mode(nmk_chip, offset, af); -} - -/** - * nmk_config_pin - configure a pin's mux attributes - * @cfg: pin confguration - * - * Configures a pin's mode (alternate function or GPIO), its pull up status, - * and its sleep mode based on the specified configuration. The @cfg is - * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These - * are constructed using, and can be further enhanced with, the macros in - * plat/pincfg.h. - * - * If a pin's mode is set to GPIO, it is configured as an input to avoid - * side-effects. The gpio can be manipulated later using standard GPIO API - * calls. - */ -int nmk_config_pin(pin_cfg_t cfg) -{ - struct nmk_gpio_chip *nmk_chip; - int gpio = PIN_NUM(cfg); - unsigned long flags; - - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} -EXPORT_SYMBOL(nmk_config_pin); - -/** - * nmk_config_pins - configure several pins at once - * @cfgs: array of pin configurations - * @num: number of elments in the array - * - * Configures several pins using nmk_config_pin(). Refer to that function for - * further information. - */ -int nmk_config_pins(pin_cfg_t *cfgs, int num) -{ - int ret = 0; - int i; - - for (i = 0; i < num; i++) { - int ret = nmk_config_pin(cfgs[i]); - if (ret) - break; - } - - return ret; -} -EXPORT_SYMBOL(nmk_config_pins); - -/** - * nmk_gpio_set_slpm() - configure the sleep mode of a pin - * @gpio: pin number - * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, - * - * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is - * changed to an input (with pullup/down enabled) in sleep and deep sleep. If - * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was - * configured even when in sleep and deep sleep. - * - * On DB8500v2 onwards, this setting loses the previous meaning and instead - * indicates if wakeup detection is enabled on the pin. Note that - * enable_irq_wake() will automatically enable wakeup detection. - */ -int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -/** - * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio - * @gpio: pin number - * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE - * - * Enables/disables pull up/down on a specified pin. This only takes effect if - * the pin is configured as an input (either explicitly or by the alternate - * function). - * - * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is - * configured as an input. Otherwise, due to the way the controller registers - * work, this function will change the value output on the pin. - */ -int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -/* Mode functions */ -int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} -EXPORT_SYMBOL(nmk_gpio_set_mode); - -int nmk_gpio_get_mode(int gpio) -{ - struct nmk_gpio_chip *nmk_chip; - u32 afunc, bfunc, bit; - - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - bit = 1 << (gpio - nmk_chip->chip.base); - - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit; - - return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0); -} -EXPORT_SYMBOL(nmk_gpio_get_mode); - - -/* IRQ functions */ -static inline int nmk_gpio_get_bitmask(int gpio) -{ - return 1 << (gpio % 32); -} - -static void nmk_gpio_irq_ack(unsigned int irq) -{ - int gpio; - struct nmk_gpio_chip *nmk_chip; - - gpio = NOMADIK_IRQ_TO_GPIO(irq); - nmk_chip = get_irq_chip_data(irq); - if (!nmk_chip) - return; - writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); -} - -enum nmk_gpio_irq_type { - NORMAL, - WAKE, -}; - -static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, - int gpio, enum nmk_gpio_irq_type which, - bool enable) -{ - u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC; - u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC; - u32 bitmask = nmk_gpio_get_bitmask(gpio); - u32 reg; - - /* we must individually set/clear the two edges */ - if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + rimsc); - if (enable) - reg |= bitmask; - else - reg &= ~bitmask; - writel(reg, nmk_chip->addr + rimsc); - } - if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + fimsc); - if (enable) - reg |= bitmask; - else - reg &= ~bitmask; - writel(reg, nmk_chip->addr + fimsc); - } -} - -static int nmk_gpio_irq_modify(unsigned int irq, enum nmk_gpio_irq_type which, - bool enable) -{ - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - - gpio = NOMADIK_IRQ_TO_GPIO(irq); - nmk_chip = get_irq_chip_data(irq); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_irq_modify(nmk_chip, gpio, which, enable); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -static void nmk_gpio_irq_mask(unsigned int irq) -{ - nmk_gpio_irq_modify(irq, NORMAL, false); -} - -static void nmk_gpio_irq_unmask(unsigned int irq) -{ - nmk_gpio_irq_modify(irq, NORMAL, true); -} - -static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - int gpio; - - gpio = NOMADIK_IRQ_TO_GPIO(irq); - nmk_chip = get_irq_chip_data(irq); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); -#ifdef CONFIG_ARCH_U8500 - if (cpu_is_u8500v2()) { - __nmk_gpio_set_slpm(nmk_chip, gpio, - on ? NMK_GPIO_SLPM_WAKEUP_ENABLE - : NMK_GPIO_SLPM_WAKEUP_DISABLE); - } -#endif - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) -{ - struct irq_desc *desc = irq_to_desc(irq); - bool enabled = !(desc->status & IRQ_DISABLED); - bool wake = desc->wake_depth; - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - - gpio = NOMADIK_IRQ_TO_GPIO(irq); - nmk_chip = get_irq_chip_data(irq); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return -EINVAL; - - if (type & IRQ_TYPE_LEVEL_HIGH) - return -EINVAL; - if (type & IRQ_TYPE_LEVEL_LOW) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - - if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); - - if (wake) - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); - - nmk_chip->edge_rising &= ~bitmask; - if (type & IRQ_TYPE_EDGE_RISING) - nmk_chip->edge_rising |= bitmask; - - nmk_chip->edge_falling &= ~bitmask; - if (type & IRQ_TYPE_EDGE_FALLING) - nmk_chip->edge_falling |= bitmask; - - if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); - - if (wake) - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); - - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -static struct irq_chip nmk_gpio_irq_chip = { - .name = "Nomadik-GPIO", - .ack = nmk_gpio_irq_ack, - .mask = nmk_gpio_irq_mask, - .unmask = nmk_gpio_irq_unmask, - .set_type = nmk_gpio_irq_set_type, - .set_wake = nmk_gpio_irq_set_wake, -}; - -static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct nmk_gpio_chip *nmk_chip; - struct irq_chip *host_chip = get_irq_chip(irq); - unsigned int gpio_irq; - u32 pending; - unsigned int first_irq; - - if (host_chip->mask_ack) - host_chip->mask_ack(irq); - else { - host_chip->mask(irq); - if (host_chip->ack) - host_chip->ack(irq); - } - - nmk_chip = get_irq_data(irq); - first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) { - gpio_irq = first_irq + __ffs(pending); - generic_handle_irq(gpio_irq); - } - - host_chip->unmask(irq); -} - -static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) -{ - unsigned int first_irq; - int i; - - first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) { - set_irq_chip(i, &nmk_gpio_irq_chip); - set_irq_handler(i, handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - set_irq_chip_data(i, nmk_chip); - set_irq_type(i, IRQ_TYPE_EDGE_FALLING); - } - set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); - set_irq_data(nmk_chip->parent_irq, nmk_chip); - return 0; -} - -/* I/O Functions */ -static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); - return 0; -} - -static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - u32 bit = 1 << offset; - - return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0; -} - -static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - __nmk_gpio_set_output(nmk_chip, offset, val); -} - -static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - __nmk_gpio_make_output(nmk_chip, offset, val); - - return 0; -} - -static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; -} - -/* This structure is replicated for each GPIO block allocated at probe time */ -static struct gpio_chip nmk_gpio_template = { - .direction_input = nmk_gpio_make_input, - .get = nmk_gpio_get_input, - .direction_output = nmk_gpio_make_output, - .set = nmk_gpio_set_output, - .to_irq = nmk_gpio_to_irq, - .ngpio = NMK_GPIO_PER_CHIP, - .can_sleep = 0, -}; - -static int __devinit nmk_gpio_probe(struct platform_device *dev) -{ - struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; - struct nmk_gpio_chip *nmk_chip; - struct gpio_chip *chip; - struct resource *res; - struct clk *clk; - int irq; - int ret; - - if (!pdata) - return -ENODEV; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto out; - } - - irq = platform_get_irq(dev, 0); - if (irq < 0) { - ret = irq; - goto out; - } - - if (request_mem_region(res->start, resource_size(res), - dev_name(&dev->dev)) == NULL) { - ret = -EBUSY; - goto out; - } - - clk = clk_get(&dev->dev, NULL); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - goto out_release; - } - - clk_enable(clk); - - nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); - if (!nmk_chip) { - ret = -ENOMEM; - goto out_clk; - } - /* - * The virt address in nmk_chip->addr is in the nomadik register space, - * so we can simply convert the resource address, without remapping - */ - nmk_chip->clk = clk; - nmk_chip->addr = io_p2v(res->start); - nmk_chip->chip = nmk_gpio_template; - nmk_chip->parent_irq = irq; - spin_lock_init(&nmk_chip->lock); - - chip = &nmk_chip->chip; - chip->base = pdata->first_gpio; - chip->label = pdata->name; - chip->dev = &dev->dev; - chip->owner = THIS_MODULE; - - ret = gpiochip_add(&nmk_chip->chip); - if (ret) - goto out_free; - - platform_set_drvdata(dev, nmk_chip); - - nmk_gpio_init_irq(nmk_chip); - - dev_info(&dev->dev, "Bits %i-%i at address %p\n", - nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); - return 0; - -out_free: - kfree(nmk_chip); -out_clk: - clk_disable(clk); - clk_put(clk); -out_release: - release_mem_region(res->start, resource_size(res)); -out: - dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, - pdata->first_gpio, pdata->first_gpio+31); - return ret; -} - -static struct platform_driver nmk_gpio_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "gpio", - }, - .probe = nmk_gpio_probe, - .suspend = NULL, /* to be done */ - .resume = NULL, -}; - -static int __init nmk_gpio_init(void) -{ - return platform_driver_register(&nmk_gpio_driver); -} - -core_initcall(nmk_gpio_init); - -MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); -MODULE_DESCRIPTION("Nomadik GPIO Driver"); -MODULE_LICENSE("GPL"); - - diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h deleted file mode 100644 index 67b113d639d..00000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PLAT_GPIO_H -#define __ASM_PLAT_GPIO_H - -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -extern int nmk_gpio_get_mode(int gpio); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; -}; - -#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h deleted file mode 100644 index 1621db67a53..00000000000 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#ifndef __PLAT_I2C_H -#define __PLAT_I2C_H - -enum i2c_freq_mode { - I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ - I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ - I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ - I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */ -}; - -/** - * struct nmk_i2c_controller - client specific controller configuration - * @clk_freq: clock frequency for the operation mode - * @slsu: Slave data setup time in ns. - * The needed setup time for three modes of operation - * are 250ns, 100ns and 10ns respectively thus leading - * to the values of 14, 6, 2 for a 48 MHz i2c clk - * @tft: Tx FIFO Threshold in bytes - * @rft: Rx FIFO Threshold in bytes - * @sm: speed mode - */ -struct nmk_i2c_controller { - unsigned long clk_freq; - unsigned short slsu; - unsigned char tft; - unsigned char rft; - enum i2c_freq_mode sm; -}; - -#endif /* __PLAT_I2C_H */ diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h deleted file mode 100644 index 65704a3d424..00000000000 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -/* - * Guaranteed runtime conversion range in seconds for - * the clocksource and clockevent. - */ -#define MTU_MIN_RANGE 4 - -/* should be set by the platform code */ -extern void __iomem *mtu_base; - -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC - -#endif /* __PLAT_MTU_H */ - diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 8c5ae3f2acf..00000000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - (sleep mode) Direction - * bit 15 - (sleep mode) Value (if output) - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * (sleep mode) direction = input - * (sleep mode) value = low - * - * PIN_CFG - default config with alternate function - * PIN_CFG_PULL - default config with alternate function and pull up/down - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -/* Shortcuts. Use these instead of separate DIR and VAL. */ -#define PIN_INPUT PIN_DIR_INPUT -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -/* - * These are the same as the ones above, but should make more sense to the - * reader when seen along with a setting a pin to AF mode. - */ -#define PIN_SLPM_INPUT PIN_INPUT -#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW -#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH - -#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_PULL(num, alt, pull) \ - ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ - (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) - -extern int nmk_config_pin(pin_cfg_t cfg); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-nomadik/include/plat/ske.h b/arch/arm/plat-nomadik/include/plat/ske.h deleted file mode 100644 index 31382fbc07d..00000000000 --- a/arch/arm/plat-nomadik/include/plat/ske.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> - * - * ux500 Scroll key and Keypad Encoder (SKE) header - */ - -#ifndef __SKE_H -#define __SKE_H - -#include <linux/input/matrix_keypad.h> - -/* register definitions for SKE peripheral */ -#define SKE_CR 0x00 -#define SKE_VAL0 0x04 -#define SKE_VAL1 0x08 -#define SKE_DBCR 0x0C -#define SKE_IMSC 0x10 -#define SKE_RIS 0x14 -#define SKE_MIS 0x18 -#define SKE_ICR 0x1C - -/* - * Keypad module - */ - -/** - * struct keypad_platform_data - structure for platform specific data - * @init: pointer to keypad init function - * @exit: pointer to keypad deinitialisation function - * @keymap_data: matrix scan code table for keycodes - * @krow: maximum number of rows - * @kcol: maximum number of columns - * @debounce_ms: platform specific debounce time - * @no_autorepeat: flag for auto repetition - * @wakeup_enable: allow waking up the system - */ -struct ske_keypad_platform_data { - int (*init)(void); - int (*exit)(void); - const struct matrix_keymap_data *keymap_data; - u8 krow; - u8 kcol; - u8 debounce_ms; - bool no_autorepeat; - bool wakeup_enable; -}; -#endif /*__SKE_KPD_H*/ diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h deleted file mode 100644 index 74b62f10d07..00000000000 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -enum stedma40_mode { - STEDMA40_MODE_LOGICAL = 0, - STEDMA40_MODE_PHYSICAL, - STEDMA40_MODE_OPERATION, -}; - -enum stedma40_mode_opt { - STEDMA40_PCHAN_BASIC_MODE = 0, - STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, - STEDMA40_PCHAN_MODULO_MODE, - STEDMA40_PCHAN_DOUBLE_DST_MODE, - STEDMA40_LCHAN_SRC_PHY_DST_LOG, - STEDMA40_LCHAN_SRC_LOG_DST_PHY, -}; - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -/* Maximum number of possible physical channels */ -#define STEDMA40_MAX_PHYS 32 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -enum stedma40_periph_data_width { - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT -}; - -enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM = 1, - STEDMA40_MEM_TO_PERIPH, - STEDMA40_PERIPH_TO_MEM, - STEDMA40_PERIPH_TO_PERIPH -}; - - -/** - * struct stedma40_chan_cfg - dst/src channel configuration - * - * @big_endian: true if the src/dst should be read as big endian - * @data_width: Data width of the src/dst hardware - * @p_size: Burst size - * @flow_ctrl: Flow control on/off. - */ -struct stedma40_half_channel_info { - bool big_endian; - enum stedma40_periph_data_width data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @high_priority: true if high-priority - * @mode: channel mode: physical, logical, or operation - * @mode_opt: options for the chosen channel mode - * @src_dev_type: Src device type - * @dst_dev_type: Dst device type - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum stedma40_xfer_dir dir; - bool high_priority; - enum stedma40_mode mode; - enum stedma40_mode_opt mode_opt; - int src_dev_type; - int dst_dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_len: length of dev_tx and dev_rx - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @memcpy: list of memcpy event lines - * @memcpy_len: length of memcpy - * @memcpy_conf_phy: default configuration of physical channel memcpy - * @memcpy_conf_log: default configuration of logical channel memcpy - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - */ -struct stedma40_platform_data { - u32 dev_len; - const dma_addr_t *dev_tx; - const dma_addr_t *dev_rx; - int *memcpy; - u32 memcpy_len; - struct stedma40_chan_cfg *memcpy_conf_phy; - struct stedma40_chan_cfg *memcpy_conf_log; - int disabled_channels[STEDMA40_MAX_PHYS]; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from - * scattergatter lists. - * - * @chan: dmaengine handle - * @sgl_dst: Destination scatter list - * @sgl_src: Source scatter list - * @sgl_len: The length of each scatterlist. Both lists must be of equal length - * and each element must match the corresponding element in the other scatter - * list. - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, - struct scatterlist *sgl_dst, - struct scatterlist *sgl_src, - unsigned int sgl_len, - unsigned long flags); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_data_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return chan->device->device_prep_slave_sg(chan, &sg, 1, - direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_data_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c deleted file mode 100644 index aedf9c1d645..00000000000 --- a/arch/arm/plat-nomadik/timer.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/arch/arm/plat-nomadik/timer.c - * - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2010 Alessandro Rubini - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/jiffies.h> -#include <linux/err.h> -#include <asm/mach/time.h> - -#include <plat/mtu.h> - -void __iomem *mtu_base; /* ssigned by machine code */ - -/* - * Kernel assumes that sched_clock can be called early - * but the MTU may not yet be initialized. - */ -static cycle_t nmdk_read_timer_dummy(struct clocksource *cs) -{ - return 0; -} - -/* clocksource: MTU decrements, so we negate the value being read. */ -static cycle_t nmdk_read_timer(struct clocksource *cs) -{ - return -readl(mtu_base + MTU_VAL(0)); -} - -static struct clocksource nmdk_clksrc = { - .name = "mtu_0", - .rating = 200, - .read = nmdk_read_timer_dummy, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * Override the global weak sched_clock symbol with this - * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. We accept that - * this wraps around for now, since it is just a relative time - * stamp. (Inspired by OMAP implementation.) - */ -unsigned long long notrace sched_clock(void) -{ - return clocksource_cyc2ns(nmdk_clksrc.read( - &nmdk_clksrc), - nmdk_clksrc.mult, - nmdk_clksrc.shift); -} - -/* Clockevent device: use one-shot mode */ -static void nmdk_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *dev) -{ - u32 cr; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - pr_err("%s: periodic mode not supported\n", __func__); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Load highest value, enable device, enable interrupts */ - cr = readl(mtu_base + MTU_CR(1)); - writel(0, mtu_base + MTU_LR(1)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); - writel(1 << 1, mtu_base + MTU_IMSC); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - /* disable irq */ - writel(0, mtu_base + MTU_IMSC); - /* disable timer */ - cr = readl(mtu_base + MTU_CR(1)); - cr &= ~MTU_CRn_ENA; - writel(cr, mtu_base + MTU_CR(1)); - /* load some high default value */ - writel(0xffffffff, mtu_base + MTU_LR(1)); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) -{ - /* writing the value has immediate effect */ - writel(evt, mtu_base + MTU_LR(1)); - return 0; -} - -static struct clock_event_device nmdk_clkevt = { - .name = "mtu_1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_mode = nmdk_clkevt_mode, - .set_next_event = nmdk_clkevt_next, -}; - -/* - * IRQ Handler for timer 1 of the MTU block. - */ -static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evdev = dev_id; - - writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ - evdev->event_handler(evdev); - return IRQ_HANDLED; -} - -static struct irqaction nmdk_timer_irq = { - .name = "Nomadik Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = nmdk_timer_interrupt, - .dev_id = &nmdk_clkevt, -}; - -void __init nmdk_timer_init(void) -{ - unsigned long rate; - struct clk *clk0; - u32 cr = MTU_CRn_32BITS; - - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - - clk_enable(clk0); - - /* - * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz - * for ux500. - * Use a divide-by-16 counter if the tick rate is more than 32MHz. - * At 32 MHz, the timer (with 32 bit counter) can be programmed - * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer - * with 16 gives too low timer resolution. - */ - rate = clk_get_rate(clk0); - if (rate > 32000000) { - rate /= 16; - cr |= MTU_CRn_PRESCALE_16; - } else { - cr |= MTU_CRn_PRESCALE_1; - } - clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE); - - /* Timer 0 is the free running clocksource */ - writel(cr, mtu_base + MTU_CR(0)); - writel(0, mtu_base + MTU_LR(0)); - writel(0, mtu_base + MTU_BGLR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); - - /* Now the scheduling clock is ready */ - nmdk_clksrc.read = nmdk_read_timer; - - if (clocksource_register(&nmdk_clksrc)) - pr_err("timer: failed to initialize clock source %s\n", - nmdk_clksrc.name); - - /* Timer 1 is used for events */ - - clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); - - writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ - - nmdk_clkevt.max_delta_ns = - clockevent_delta2ns(0xffffffff, &nmdk_clkevt); - nmdk_clkevt.min_delta_ns = - clockevent_delta2ns(0x00000002, &nmdk_clkevt); - nmdk_clkevt.cpumask = cpumask_of(0); - - /* Register irq and clockevents */ - setup_irq(IRQ_MTU0, &nmdk_timer_irq); - clockevents_register_device(&nmdk_clkevt); -} |