diff options
Diffstat (limited to 'arch/arm/plat-nomadik/include')
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/gpio.h | 70 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/i2c.h | 37 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/mtu.h | 48 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/ste_dma40.h | 239 |
4 files changed, 0 insertions, 394 deletions
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h deleted file mode 100644 index 4200811249c..00000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PLAT_GPIO_H -#define __ASM_PLAT_GPIO_H - -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -extern int nmk_gpio_get_mode(int gpio); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; -}; - -#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h deleted file mode 100644 index 1621db67a53..00000000000 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#ifndef __PLAT_I2C_H -#define __PLAT_I2C_H - -enum i2c_freq_mode { - I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ - I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ - I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ - I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */ -}; - -/** - * struct nmk_i2c_controller - client specific controller configuration - * @clk_freq: clock frequency for the operation mode - * @slsu: Slave data setup time in ns. - * The needed setup time for three modes of operation - * are 250ns, 100ns and 10ns respectively thus leading - * to the values of 14, 6, 2 for a 48 MHz i2c clk - * @tft: Tx FIFO Threshold in bytes - * @rft: Rx FIFO Threshold in bytes - * @sm: speed mode - */ -struct nmk_i2c_controller { - unsigned long clk_freq; - unsigned short slsu; - unsigned char tft; - unsigned char rft; - enum i2c_freq_mode sm; -}; - -#endif /* __PLAT_I2C_H */ diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h deleted file mode 100644 index 42c907258b1..00000000000 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -/* should be set by the platform code */ -extern void __iomem *mtu_base; - -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC - -#endif /* __PLAT_MTU_H */ - diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h deleted file mode 100644 index 4d12ea4ca36..00000000000 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ /dev/null @@ -1,239 +0,0 @@ -/* - * arch/arm/plat-nomadik/include/plat/ste_dma40.h - * - * Copyright (C) ST-Ericsson 2007-2010 - * License terms: GNU General Public License (GPL) version 2 - * Author: Per Friden <per.friden@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> -#include <linux/dmaengine.h> - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -/* - * Description of bitfields of channel_type variable is available in - * the info structure. - */ - -/* Priority */ -#define STEDMA40_INFO_PRIO_TYPE_POS 2 -#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS) -#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS) - -/* Mode */ -#define STEDMA40_INFO_CH_MODE_TYPE_POS 6 -#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS) -#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS) -#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS) - -/* Mode options */ -#define STEDMA40_INFO_CH_MODE_OPT_POS 8 -#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS) -#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS) - -/* Interrupt */ -#define STEDMA40_INFO_TIM_POS 10 -#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS) -#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS) - -/* End of channel_type configuration */ - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -enum stedma40_endianess { - STEDMA40_LITTLE_ENDIAN, - STEDMA40_BIG_ENDIAN -}; - -enum stedma40_periph_data_width { - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT -}; - -struct stedma40_half_channel_info { - enum stedma40_endianess endianess; - enum stedma40_periph_data_width data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM, - STEDMA40_MEM_TO_PERIPH, - STEDMA40_PERIPH_TO_MEM, - STEDMA40_PERIPH_TO_PERIPH -}; - - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @channel_type: priority, mode, mode options and interrupt configuration. - * @src_dev_type: Src device type - * @dst_dev_type: Dst device type - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * @pre_transfer_data: Data to be passed on to the pre_transfer() function. - * @pre_transfer: Callback used if needed before preparation of transfer. - * Only called if device is set. size of bytes to transfer - * (in case of multiple element transfer size is size of the first element). - * - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum stedma40_xfer_dir dir; - unsigned int channel_type; - int src_dev_type; - int dst_dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; - void *pre_transfer_data; - int (*pre_transfer) (struct dma_chan *chan, - void *data, - int size); -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_len: length of dev_tx and dev_rx - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @memcpy: list of memcpy event lines - * @memcpy_len: length of memcpy - * @memcpy_conf_phy: default configuration of physical channel memcpy - * @memcpy_conf_log: default configuration of logical channel memcpy - * @llis_per_log: number of max linked list items per logical channel - * - */ -struct stedma40_platform_data { - u32 dev_len; - const dma_addr_t *dev_tx; - const dma_addr_t *dev_rx; - int *memcpy; - u32 memcpy_len; - struct stedma40_chan_cfg *memcpy_conf_phy; - struct stedma40_chan_cfg *memcpy_conf_log; - unsigned int llis_per_log; -}; - -/** - * setdma40_set_psize() - Used for changing the package size of an - * already configured dma channel. - * - * @chan: dmaengine handle - * @src_psize: new package side for src. (STEDMA40_PSIZE*) - * @src_psize: new package side for dst. (STEDMA40_PSIZE*) - * - * returns 0 on ok, otherwise negative error number. - */ -int stedma40_set_psize(struct dma_chan *chan, - int src_psize, - int dst_psize); - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from - * scattergatter lists. - * - * @chan: dmaengine handle - * @sgl_dst: Destination scatter list - * @sgl_src: Source scatter list - * @sgl_len: The length of each scatterlist. Both lists must be of equal length - * and each element must match the corresponding element in the other scatter - * list. - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, - struct scatterlist *sgl_dst, - struct scatterlist *sgl_src, - unsigned int sgl_len, - unsigned long flags); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_data_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return chan->device->device_prep_slave_sg(chan, &sg, 1, - direction, flags); -} - -#endif |