diff options
Diffstat (limited to 'arch/arm/plat-mxc')
40 files changed, 0 insertions, 5456 deletions
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig deleted file mode 100644 index 9cc2b16fdf7..00000000000 --- a/arch/arm/plat-mxc/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -if ARCH_MXC - -menu "Freescale MXC Implementations" - -choice - prompt "MXC/iMX Base Type" - default ARCH_MX3 - -config ARCH_MX1 - bool "MX1-based" - select CPU_ARM920T - help - This enables support for systems based on the Freescale i.MX1 family - -config ARCH_MX2 - bool "MX2-based" - select CPU_ARM926T - help - This enables support for systems based on the Freescale i.MX2 family - -config ARCH_MX3 - bool "MX3-based" - select CPU_V6 - help - This enables support for systems based on the Freescale i.MX3 family - -endchoice - -source "arch/arm/mach-mx1/Kconfig" -source "arch/arm/mach-mx2/Kconfig" -source "arch/arm/mach-mx3/Kconfig" - -endmenu - -config MXC_IRQ_PRIOR - bool "Use IRQ priority" - depends on ARCH_MXC - help - Select this if you want to use prioritized IRQ handling. - This feature prevents higher priority ISR to be interrupted - by lower priority IRQ even IRQF_DISABLED flag is not set. - This may be useful in embedded applications, where are strong - requirements for timing. - Say N here, unless you have a specialized requirement. - -endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile deleted file mode 100644 index db74a929179..00000000000 --- a/arch/arm/plat-mxc/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support -obj-y := irq.o clock.o gpio.o time.o devices.o - -obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o -obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c deleted file mode 100644 index 0a38f0b396e..00000000000 --- a/arch/arm/plat-mxc/clock.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * Based on arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -/* #define DEBUG */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/platform_device.h> -#include <linux/proc_fs.h> -#include <linux/semaphore.h> -#include <linux/string.h> - -#include <mach/clock.h> - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -/*------------------------------------------------------------------------- - * Standard clock functions defined in include/linux/clk.h - *-------------------------------------------------------------------------*/ - -/* - * Retrieve a clock by name. - * - * Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use "<name>.<id>". If this fails, - * we try to use clock name only. - * The reference count to the clock's module owner ref count is incremented. - */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - const char *str; - - if (id == NULL) - return clk; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - str = strrchr(id, '.'); - if (str) { - int cnt = str - id; - str++; - idno = simple_strtol(str, NULL, 10); - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strlen(p->name) == cnt && - strncmp(id, p->name, cnt) == 0 && - try_module_get(p->owner)) { - clk = p; - goto found; - } - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id); - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); - -static void __clk_disable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - __clk_disable(clk->parent); - __clk_disable(clk->secondary); - - if (!(--clk->usecount) && clk->disable) - clk->disable(clk); -} - -static int __clk_enable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - __clk_enable(clk->parent); - __clk_enable(clk->secondary); - - if (clk->usecount++ == 0 && clk->enable) - clk->enable(clk); - - return 0; -} - -/* This function increments the reference count on the clock and enables the - * clock if not already enabled. The parent clock tree is recursively enabled - */ -int clk_enable(struct clk *clk) -{ - int ret = 0; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = __clk_enable(clk); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* This function decrements the reference count on the clock and disables - * the clock when reference count is 0. The parent clock tree is - * recursively disabled - */ -void clk_disable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - __clk_disable(clk); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_disable); - -/* Retrieve the *current* clock rate. If the clock itself - * does not provide a special calculation routine, ask - * its parent and so on, until one is able to return - * a valid clock rate - */ -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return 0UL; - - if (clk->get_rate) - return clk->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL(clk_get_rate); - -/* Decrement the clock's module reference count */ -void clk_put(struct clk *clk) -{ - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -/* Round the requested clock rate to the nearest supported - * rate that is less than or equal to the requested rate. - * This is dependent on the clock's current parent. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk == NULL || IS_ERR(clk) || !clk->round_rate) - return 0; - - return clk->round_rate(clk, rate); -} -EXPORT_SYMBOL(clk_round_rate); - -/* Set the clock to the requested clock rate. The rate must - * match a supported rate exactly based on what clk_round_rate returns - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0) - return ret; - - mutex_lock(&clocks_mutex); - ret = clk->set_rate(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* Set the clock's parent to another clock source */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || - IS_ERR(parent) || clk->set_parent == NULL) - return ret; - - mutex_lock(&clocks_mutex); - ret = clk->set_parent(clk, parent); - if (ret == 0) - clk->parent = parent; - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -/* Retrieve the clock's parent clock source */ -struct clk *clk_get_parent(struct clk *clk) -{ - struct clk *ret = NULL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -/* - * Add a new clock to the clock tree. - */ -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -/* Remove a clock from the clock tree */ -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -#ifdef CONFIG_PROC_FS -static int mxc_clock_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - struct clk *clkp; - char *p = page; - int len; - - list_for_each_entry(clkp, &clocks, node) { - p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id, - clk_get_rate(clkp), clkp->usecount); - if (clkp->parent) - p += sprintf(p, ", %s-%d\n", clkp->parent->name, - clkp->parent->id); - else - p += sprintf(p, "\n"); - } - - len = (p - page) - off; - if (len < 0) - len = 0; - - *eof = (len <= count) ? 1 : 0; - *start = page + off; - - return len; -} - -static int __init mxc_setup_proc_entry(void) -{ - struct proc_dir_entry *res; - - res = create_proc_read_entry("cpu/clocks", 0, NULL, - mxc_clock_read_proc, NULL); - if (!res) { - printk(KERN_ERR "Failed to create proc/cpu/clocks\n"); - return -ENOMEM; - } - return 0; -} - -late_initcall(mxc_setup_proc_entry); -#endif diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c deleted file mode 100644 index c66748267c4..00000000000 --- a/arch/arm/plat-mxc/devices.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -int __init mxc_register_device(struct platform_device *pdev, void *data) -{ - int ret; - - pdev->dev.platform_data = data; - - ret = platform_device_register(pdev); - if (ret) - pr_debug("Unable to register platform device '%s': %d\n", - pdev->name, ret); - - return ret; -} - diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c deleted file mode 100644 index 2905ec75875..00000000000 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ /dev/null @@ -1,842 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/dma-mx1-mx2.c - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de> - * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/scatterlist.h> -#include <linux/io.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma-mx1-mx2.h> - -#define DMA_DCR 0x00 /* Control Register */ -#define DMA_DISR 0x04 /* Interrupt status Register */ -#define DMA_DIMR 0x08 /* Interrupt mask Register */ -#define DMA_DBTOSR 0x0c /* Burst timeout status Register */ -#define DMA_DRTOSR 0x10 /* Request timeout Register */ -#define DMA_DSESR 0x14 /* Transfer Error Status Register */ -#define DMA_DBOSR 0x18 /* Buffer overflow status Register */ -#define DMA_DBTOCR 0x1c /* Burst timeout control Register */ -#define DMA_WSRA 0x40 /* W-Size Register A */ -#define DMA_XSRA 0x44 /* X-Size Register A */ -#define DMA_YSRA 0x48 /* Y-Size Register A */ -#define DMA_WSRB 0x4c /* W-Size Register B */ -#define DMA_XSRB 0x50 /* X-Size Register B */ -#define DMA_YSRB 0x54 /* Y-Size Register B */ -#define DMA_SAR(x) (0x80 + ((x) << 6)) /* Source Address Registers */ -#define DMA_DAR(x) (0x84 + ((x) << 6)) /* Destination Address Registers */ -#define DMA_CNTR(x) (0x88 + ((x) << 6)) /* Count Registers */ -#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */ -#define DMA_RSSR(x) (0x90 + ((x) << 6)) /* Request source select Registers */ -#define DMA_BLR(x) (0x94 + ((x) << 6)) /* Burst length Registers */ -#define DMA_RTOR(x) (0x98 + ((x) << 6)) /* Request timeout Registers */ -#define DMA_BUCR(x) (0x98 + ((x) << 6)) /* Bus Utilization Registers */ -#define DMA_CCNR(x) (0x9C + ((x) << 6)) /* Channel counter Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff) -#define CNTR_CNT(x) ((x) & 0xffffff) -#define CCR_ACRPT (1<<14) -#define CCR_DMOD_LINEAR (0x0 << 12) -#define CCR_DMOD_2D (0x1 << 12) -#define CCR_DMOD_FIFO (0x2 << 12) -#define CCR_DMOD_EOBFIFO (0x3 << 12) -#define CCR_SMOD_LINEAR (0x0 << 10) -#define CCR_SMOD_2D (0x1 << 10) -#define CCR_SMOD_FIFO (0x2 << 10) -#define CCR_SMOD_EOBFIFO (0x3 << 10) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 (0x0 << 6) -#define CCR_DSIZ_8 (0x1 << 6) -#define CCR_DSIZ_16 (0x2 << 6) -#define CCR_SSIZ_32 (0x0 << 4) -#define CCR_SSIZ_8 (0x1 << 4) -#define CCR_SSIZ_16 (0x2 << 4) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void (*prog_handler) (int, void *, struct scatterlist *); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int resbytes; - int dma_num; - - int in_use; - - u32 ccr_from_device; - u32 ccr_to_device; - - struct timer_list watchdog; - - int hw_chaining; -}; - -static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -static struct clk *dma_clk; - -static int imx_dma_hw_chain(struct imx_dma_channel *imxdma) -{ - if (cpu_is_mx27()) - return imxdma->hw_chaining; - else - return 0; -} - - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - */ -static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long now; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return 0; - } - - now = min(imxdma->resbytes, sg->length); - imxdma->resbytes -= now; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel)); - else - __raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel)); - - __raw_writel(now, DMA_BASE + DMA_CNTR(channel)); - - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, " - "size 0x%08x\n", channel, - __raw_readl(DMA_BASE + DMA_DAR(channel)), - __raw_readl(DMA_BASE + DMA_SAR(channel)), - __raw_readl(DMA_BASE + DMA_CNTR(channel))); - - return now; -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from - * device transfer - * - * @channel: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - imxdma->sg = NULL; - imxdma->dma_mode = dmamode; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - channel); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dma_address, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - __raw_writel(dma_address, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - channel); - return -EINVAL; - } - - __raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_single); - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @channel: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for - * transfer specified by provided parameters. The scatter-gather emulation - * is set up according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(channel) has to specify transfer parameters, the next settings is - * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is - * specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options - * combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(int channel, - struct scatterlist *sg, unsigned int sgcount, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (imxdma->in_use) - return -EBUSY; - - imxdma->sg = sg; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", - channel); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - channel); - return -EINVAL; - } - - imx_dma_sg_next(channel, sg); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_sg); - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - u32 dreq = 0; - - imxdma->hw_chaining = 0; - - if (hw_chaining) { - imxdma->hw_chaining = 1; - if (!imx_dma_hw_chain(imxdma)) - return -EINVAL; - } - - if (dmareq) - dreq = CCR_REN; - - imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq; - imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq; - - __raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_config_channel); - -void imx_dma_config_burstlen(int channel, unsigned int burstlen) -{ - __raw_writel(burstlen, DMA_BASE + DMA_BLR(channel)); -} -EXPORT_SYMBOL(imx_dma_config_burstlen); - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification - * handlers - * @channel: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_handlers); - -/** - * imx_dma_setup_progression_handler - setup i.MX DMA channel progression - * handlers - * @channel: i.MX DMA channel number - * @prog_handler: the pointer to the function called if the transfer progresses - */ -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - imxdma->prog_handler = prog_handler; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_progression_handler); - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @channel: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", channel); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return; - } - - if (imxdma->in_use) - return; - - local_irq_save(flags); - - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN | - CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); - -#ifdef CONFIG_ARCH_MX2 - if (imxdma->sg && imx_dma_hw_chain(imxdma)) { - imxdma->sg = sg_next(imxdma->sg); - if (imxdma->sg) { - u32 tmp; - imx_dma_sg_next(channel, imxdma->sg); - tmp = __raw_readl(DMA_BASE + DMA_CCR(channel)); - __raw_writel(tmp | CCR_RPT | CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); - } - } -#endif - imxdma->in_use = 1; - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_enable); - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @channel: i.MX DMA channel number - */ -void imx_dma_disable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", channel); - - if (imx_dma_hw_chain(imxdma)) - del_timer(&imxdma->watchdog); - - local_irq_save(flags); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); - imxdma->in_use = 0; - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_disable); - -#ifdef CONFIG_ARCH_MX2 -static void imx_dma_watchdog(unsigned long chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); - imxdma->in_use = 0; - imxdma->sg = NULL; - - if (imxdma->err_handler) - imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT); -} -#endif - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr; - struct imx_dma_channel *imxdma; - unsigned int err_mask; - int errcode; - - disr = __raw_readl(DMA_BASE + DMA_DISR); - - err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) | - __raw_readl(DMA_BASE + DMA_DRTOSR) | - __raw_readl(DMA_BASE + DMA_DSESR) | - __raw_readl(DMA_BASE + DMA_DBOSR); - - if (!err_mask) - return IRQ_HANDLED; - - __raw_writel(disr & err_mask, DMA_BASE + DMA_DISR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (!(err_mask & (1 << i))) - continue; - imxdma = &imx_dma_channels[i]; - errcode = 0; - - if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBTOSR); - errcode |= IMX_DMA_ERR_BURST; - } - if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DRTOSR); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DSESR); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBOSR); - errcode |= IMX_DMA_ERR_BUFFER; - } - if (imxdma->name && imxdma->err_handler) { - imxdma->err_handler(i, imxdma->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, imxdma->name, - errcode & IMX_DMA_ERR_BURST ? " burst" : "", - errcode & IMX_DMA_ERR_REQUEST ? " request" : "", - errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "", - errcode & IMX_DMA_ERR_BUFFER ? " buffer" : ""); - } - return IRQ_HANDLED; -} - -static void dma_irq_handle_channel(int chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - if (!imxdma->name) { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", chno); - return; - } - - if (imxdma->sg) { - u32 tmp; - struct scatterlist *current_sg = imxdma->sg; - imxdma->sg = sg_next(imxdma->sg); - - if (imxdma->sg) { - imx_dma_sg_next(chno, imxdma->sg); - - tmp = __raw_readl(DMA_BASE + DMA_CCR(chno)); - - if (imx_dma_hw_chain(imxdma)) { - /* FIXME: The timeout should probably be - * configurable - */ - mod_timer(&imxdma->watchdog, - jiffies + msecs_to_jiffies(500)); - - tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; - __raw_writel(tmp, DMA_BASE + - DMA_CCR(chno)); - } else { - __raw_writel(tmp & ~CCR_CEN, DMA_BASE + - DMA_CCR(chno)); - tmp |= CCR_CEN; - } - - __raw_writel(tmp, DMA_BASE + DMA_CCR(chno)); - - if (imxdma->prog_handler) - imxdma->prog_handler(chno, imxdma->data, - current_sg); - - return; - } - - if (imx_dma_hw_chain(imxdma)) { - del_timer(&imxdma->watchdog); - return; - } - } - - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); - imxdma->in_use = 0; - if (imxdma->irq_handler) - imxdma->irq_handler(chno, imxdma->data); -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr; - -#ifdef CONFIG_ARCH_MX2 - dma_err_handler(irq, dev_id); -#endif - - disr = __raw_readl(DMA_BASE + DMA_DISR); - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - __raw_writel(disr, DMA_BASE + DMA_DISR); - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) - dma_irq_handle_channel(i); - } - - return IRQ_HANDLED; -} - -/** - * imx_dma_request - request/allocate specified channel number - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(int channel, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - int ret = 0; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (channel >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, channel); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -EBUSY; - } - -#ifdef CONFIG_ARCH_MX2 - ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", - NULL); - if (ret) { - local_irq_restore(flags); - printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", - MXC_INT_DMACH0 + channel, channel); - return ret; - } - init_timer(&imxdma->watchdog); - imxdma->watchdog.function = &imx_dma_watchdog; - imxdma->watchdog.data = channel; -#endif - - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL(imx_dma_request); - -/** - * imx_dma_free - release previously acquired channel - * @channel: i.MX DMA channel number - */ -void imx_dma_free(int channel) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free free channel %d\n", - __func__, channel); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); - imxdma->name = NULL; - -#ifdef CONFIG_ARCH_MX2 - free_irq(MXC_INT_DMACH0 + channel, NULL); -#endif - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_free); - -/** - * imx_dma_request_by_prio - find and request some of free channels best - * suiting requested priority - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - * - * This function tries to find a free channel in the specified priority group - * This function tries to find a free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) - if (!imx_dma_request(i, name)) - return i; - - for (i = best - 1; i >= 0; i--) - if (!imx_dma_request(i, name)) - return i; - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} -EXPORT_SYMBOL(imx_dma_request_by_prio); - -static int __init imx_dma_init(void) -{ - int ret = 0; - int i; - - dma_clk = clk_get(NULL, "dma_clk"); - clk_enable(dma_clk); - - /* reset DMA module */ - __raw_writel(DCR_DRST, DMA_BASE + DMA_DCR); - -#ifdef CONFIG_ARCH_MX1 - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - return ret; - } -#endif - /* enable DMA module */ - __raw_writel(DCR_DEN, DMA_BASE + DMA_DCR); - - /* clear all interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR); - - /* disable interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c deleted file mode 100644 index ccbd94adc66..00000000000 --- a/arch/arm/plat-mxc/gpio.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <asm-generic/bug.h> - -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) -{ - __raw_writel(1 << index, port->base + GPIO_ISR); -} - -static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, - int enable) -{ - u32 l; - - l = __raw_readl(port->base + GPIO_IMR); - l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); -} - -static void gpio_ack_irq(u32 irq) -{ - u32 gpio = irq_to_gpio(irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void gpio_mask_irq(u32 irq) -{ - u32 gpio = irq_to_gpio(irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void gpio_unmask_irq(u32 irq) -{ - u32 gpio = irq_to_gpio(irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int gpio_set_irq_type(u32 irq, u32 type) -{ - u32 gpio = irq_to_gpio(irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - u32 bit, val; - int edge; - void __iomem *reg = port->base; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: /* this includes IRQ_TYPE_EDGE_BOTH */ - return -EINVAL; - } - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); - _clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -/* handle n interrupts in one status register */ -static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) -{ - u32 gpio_irq_no; - - gpio_irq_no = port->virtual_irq_start; - for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { - - if ((irq_stat & 1) == 0) - continue; - - BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); - irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, - &irq_desc[gpio_irq_no]); - } -} - -#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1) -/* MX1 and MX3 has one interrupt *per* gpio port */ -static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); - - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); - mxc_gpio_irq_handler(port, irq_stat); -} -#endif - -#ifdef CONFIG_ARCH_MX2 -/* MX2 has one interrupt *for all* gpio ports */ -static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - int i; - u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); - - /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); - if (!irq_msk) - continue; - - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; - if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); - } -} -#endif - -static struct irq_chip gpio_irq_chip = { - .ack = gpio_ack_irq, - .mask = gpio_mask_irq, - .unmask = gpio_unmask_irq, - .set_type = gpio_set_irq_type, -}; - -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - - l = __raw_readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - - l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset); - __raw_writel(l, reg); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - _set_gpio_direction(chip, offset, 1); - mxc_gpio_set(chip, offset, value); - return 0; -} - -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_edge_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - -#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1) - /* setup one handler for each entry */ - set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); - set_irq_data(port[i].irq, &port[i]); -#endif - } - -#ifdef CONFIG_ARCH_MX2 - /* setup one handler for all GPIO interrupts */ - set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler); - set_irq_data(port[0].irq, port); -#endif - return 0; -} diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h deleted file mode 100644 index 8f34a05afc8..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ /dev/null @@ -1,349 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ - -/* external interrupt multiplexer */ -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) - -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* - * MXC UART EVB board level configurations - */ -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) - -/* - * @name Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M - -/* - * PBC Controller parameters - */ - -/* - * Base address of PBC controller, CS4 - */ -#define PBC_BASE_ADDRESS 0xEB000000 -#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset)) - -/* - * PBC Interupt name definitions - */ -#define PBC_GPIO1_0 0 -#define PBC_GPIO1_1 1 -#define PBC_GPIO1_2 2 -#define PBC_GPIO1_3 3 -#define PBC_GPIO1_4 4 -#define PBC_GPIO1_5 5 - -#define PBC_INTR_MAX_NUM 6 -#define PBC_INTR_SHARED_MAX_NUM 8 - -/* When the PBC address connection is fixed in h/w, defined as 1 */ -#define PBC_ADDR_SH 0 - -/* Offsets for the PBC Controller register */ -/* - * PBC Board version register offset - */ -#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 set address. - */ -#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 clear address. - */ -#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) -/* - * PBC Board control register 2 set address. - */ -#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) -/* - * PBC Board control register 2 clear address. - */ -#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 clear address. - */ -#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) -/* - * PBC Board control register 4 clear address. - */ -#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) -/*PBC_ADDR_SH - * PBC Board status register 1. - */ -#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) -/* - * PBC Board interrupt status register. - */ -#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) -/* - * PBC Board interrupt current status register. - */ -#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register set address. - */ -#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register clear address. - */ -#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) -/* - * External UART A. - */ -#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Status. - */ -#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Set. - */ -#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Clear. - */ -#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) -/* - * Ethernet Controller IO base address. - */ -#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) -/* - * Ethernet Controller Memory base address. - */ -#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) -/* - * Ethernet Controller DMA base address. - */ -#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) - -/* PBC Board Version Register bit definition */ -#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ -#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ - -/* PBC Board Control Register 1 bit definitions */ -#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ -#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ -#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ -#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ -#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ - -/* PBC Board Control Register 2 bit definitions */ -#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ -#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ -#define PBC_BCTRL2_ATAFEC_EN 0X0010 -#define PBC_BCTRL2_ATAFEC_SEL 0X0020 -#define PBC_BCTRL2_ATA_EN 0X0040 -#define PBC_BCTRL2_IRDA_SD 0X0080 -#define PBC_BCTRL2_IRDA_EN 0X0100 -#define PBC_BCTRL2_CCTL10 0X0200 -#define PBC_BCTRL2_CCTL11 0X0400 - -/* PBC Board Control Register 3 bit definitions */ -#define PBC_BCTRL3_HSH_EN 0X0020 -#define PBC_BCTRL3_FSH_MOD 0X0040 -#define PBC_BCTRL3_OTG_HS_EN 0X0080 -#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 -#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 -#define PBC_BCTRL3_USB_OTG_ON 0X0800 -#define PBC_BCTRL3_USB_FSH_ON 0X1000 - -/* PBC Board Control Register 4 bit definitions */ -#define PBC_BCTRL4_REGEN_SEL 0X0001 -#define PBC_BCTRL4_USER_OFF 0X0002 -#define PBC_BCTRL4_VIB_EN 0X0004 -#define PBC_BCTRL4_PWRGT1_EN 0X0008 -#define PBC_BCTRL4_PWRGT2_EN 0X0010 -#define PBC_BCTRL4_STDBY_PRI 0X0020 - -#ifndef __ASSEMBLY__ -/* - * Enumerations for SD cards and memory stick card. This corresponds to - * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. - */ -enum mxc_card_no { - MXC_CARD_SD2 = 0, - MXC_CARD_SD3, - MXC_CARD_MS, - MXC_CARD_SD1, - MXC_CARD_MIN = MXC_CARD_SD2, - MXC_CARD_MAX = MXC_CARD_SD1, -}; -#endif - -#define MXC_CPLD_VER_1_50 0x01 - -/* - * PBC BSTAT Register bit definitions - */ -#define PBC_BSTAT_PRI_INT 0X0001 -#define PBC_BSTAT_USB_BYP 0X0002 -#define PBC_BSTAT_ATA_IOCS16 0X0004 -#define PBC_BSTAT_ATA_CBLID 0X0008 -#define PBC_BSTAT_ATA_DASP 0X0010 -#define PBC_BSTAT_PWR_RDY 0X0020 -#define PBC_BSTAT_SD3_WP 0X0100 -#define PBC_BSTAT_SD2_WP 0X0200 -#define PBC_BSTAT_SD1_WP 0X0400 -#define PBC_BSTAT_SD3_DET 0X0800 -#define PBC_BSTAT_SD2_DET 0X1000 -#define PBC_BSTAT_SD1_DET 0X2000 -#define PBC_BSTAT_MS_DET 0X4000 -#define PBC_BSTAT_SD3_DET_BIT 11 -#define PBC_BSTAT_SD2_DET_BIT 12 -#define PBC_BSTAT_SD1_DET_BIT 13 -#define PBC_BSTAT_MS_DET_BIT 14 -#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ - ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ - ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ - ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ - 0x0)))) - -/* - * PBC UART Control Register bit definitions - */ -#define PBC_UCTRL_DCE_DCD 0X0001 -#define PBC_UCTRL_DCE_DSR 0X0002 -#define PBC_UCTRL_DCE_RI 0X0004 -#define PBC_UCTRL_DTE_DTR 0X0100 - -/* - * PBC UART Status Register bit definitions - */ -#define PBC_USTAT_DTE_DCD 0X0001 -#define PBC_USTAT_DTE_DSR 0X0002 -#define PBC_USTAT_DTE_RI 0X0004 -#define PBC_USTAT_DCE_DTR 0X0100 - -/* - * PBC Interupt mask register bit definitions - */ -#define PBC_INTR_SD3_R_EN_BIT 4 -#define PBC_INTR_SD2_R_EN_BIT 0 -#define PBC_INTR_SD1_R_EN_BIT 6 -#define PBC_INTR_MS_R_EN_BIT 5 -#define PBC_INTR_SD3_EN_BIT 13 -#define PBC_INTR_SD2_EN_BIT 12 -#define PBC_INTR_MS_EN_BIT 14 -#define PBC_INTR_SD1_EN_BIT 15 - -#define PBC_INTR_SD2_R_EN 0x0001 -#define PBC_INTR_LOW_BAT 0X0002 -#define PBC_INTR_OTG_FSOVER 0X0004 -#define PBC_INTR_FSH_OVER 0X0008 -#define PBC_INTR_SD3_R_EN 0x0010 -#define PBC_INTR_MS_R_EN 0x0020 -#define PBC_INTR_SD1_R_EN 0x0040 -#define PBC_INTR_FEC_INT 0X0080 -#define PBC_INTR_ENET_INT 0X0100 -#define PBC_INTR_OTGFS_INT 0X0200 -#define PBC_INTR_XUART_INT 0X0400 -#define PBC_INTR_CCTL12 0X0800 -#define PBC_INTR_SD2_EN 0x1000 -#define PBC_INTR_SD3_EN 0x2000 -#define PBC_INTR_MS_EN 0x4000 -#define PBC_INTR_SD1_EN 0x8000 - - - -/* For interrupts like xuart, enet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) -#define MXC_MAX_EXP_IO_LINES 16 - -/* - * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. - * - */ -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) - -/* - * This is System IRQ used by CS8900A for interrupt generation - * taken from platform.h - */ -#define CS8900AIRQ EXPIO_INT_ENET_INT -/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ -#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) - -#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) - -/* -* This is used to detect if the CPLD version is for mx27 evb board rev-a -*/ -#define PBC_CPLD_VERSION_IS_REVA() \ - ((__raw_readw(PBC_VERSION_REG) & \ - (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ - == 0) - -/* This is used to active or inactive ata signal in CPLD . - * It is dependent with hardware - */ -#define PBC_ATA_SIGNAL_ACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_CLEAR_REG) - -#define PBC_ATA_SIGNAL_INACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_SET_REG) - -#define MXC_BD_LED1 (1 << 5) -#define MXC_BD_LED2 (1 << 6) -#define MXC_BD_LED_ON(led) \ - __raw_writew(led, PBC_BCTRL1_SET_REG) -#define MXC_BD_LED_OFF(led) \ - __raw_writew(led, PBC_BCTRL1_CLEAR_REG) - -/* to determine the correct external crystal reference */ -#define CKIH_27MHZ_BIT_SET (1 << 3) - -#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h deleted file mode 100644 index 451d510d08c..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) -/* Offsets for the PBC Controller register */ - -/* PBC Board status register offset */ -#define PBC_BSTAT 0x000002 - -/* PBC Board control register 1 set address */ -#define PBC_BCTRL1_SET 0x000004 - -/* PBC Board control register 1 clear address */ -#define PBC_BCTRL1_CLEAR 0x000006 - -/* PBC Board control register 2 set address */ -#define PBC_BCTRL2_SET 0x000008 - -/* PBC Board control register 2 clear address */ -#define PBC_BCTRL2_CLEAR 0x00000A - -/* PBC Board control register 3 set address */ -#define PBC_BCTRL3_SET 0x00000C - -/* PBC Board control register 3 clear address */ -#define PBC_BCTRL3_CLEAR 0x00000E - -/* PBC Board control register 4 set address */ -#define PBC_BCTRL4_SET 0x000010 - -/* PBC Board control register 4 clear address */ -#define PBC_BCTRL4_CLEAR 0x000012 - -/* PBC Board status register 1 */ -#define PBC_BSTAT1 0x000014 - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -/* Ethernet Controller Memory base address */ -#define PBC_CS8900A_MEMBASE 0x021000 - -/* Ethernet Controller DMA base address */ -#define PBC_CS8900A_DMABASE 0x022000 - -/* External chip select 0 */ -#define PBC_XCS0 0x040000 - -/* LCD Display enable */ -#define PBC_LCD_EN_B 0x060000 - -/* Code test debug enable */ -#define PBC_CODE_B 0x070000 - -/* PSRAM memory select */ -#define PBC_PSRAM_B 0x5000000 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) - -#define MXC_MAX_EXP_IO_LINES 16 - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h deleted file mode 100644 index e4e5cf5ad7d..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ - -#define MXC_MAX_EXP_IO_LINES 16 - - -/* - * Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M -/* - * Size of MBX buffer memory - */ -#define MXC_MBX_MEM_SIZE SZ_16M -/* - * Size of memory available to kernel - */ -#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ - diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h deleted file mode 100644 index 2b6b316d0f5..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h deleted file mode 100644 index 82232ba3c8f..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-pcm037.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ -#define __ASM_ARCH_MXC_BOARD_PCM037_H__ - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h deleted file mode 100644 index 750c62afd90..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ -#define __ASM_ARCH_MXC_BOARD_PCM038_H__ - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside pcm038_init(). - * - * This example here is for the development board. Refer pcm970-baseboard.c - */ - -extern void pcm970_baseboard_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h deleted file mode 100644 index d21f78e7881..00000000000 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_CLOCK_H__ -#define __ASM_ARCH_MXC_CLOCK_H__ - -#ifndef __ASSEMBLY__ -#include <linux/list.h> - -struct module; - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - int id; - /* Source clock this clk depends on */ - struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; - /* Reference count of clock enable/disable */ - __s8 usecount; - /* Register bit position for clock's enable/disable control. */ - u8 enable_shift; - /* Register address for clock's enable/disable control. */ - void __iomem *enable_reg; - u32 flags; - /* get the current clock rate (always a fresh value) */ - unsigned long (*get_rate) (struct clk *); - /* Function ptr to set the clock to a new rate. The rate must match a - supported rate returned from round_rate. Leave blank if clock is not - programmable */ - int (*set_rate) (struct clk *, unsigned long); - /* Function ptr to round the requested clock rate to the nearest - supported rate that is less than or equal to the requested rate. */ - unsigned long (*round_rate) (struct clk *, unsigned long); - /* Function ptr to enable the clock. Leave blank if clock can not - be gated. */ - int (*enable) (struct clk *); - /* Function ptr to disable the clock. Leave blank if clock can not - be gated. */ - void (*disable) (struct clk *); - /* Function ptr to set the parent clock of the clock. */ - int (*set_parent) (struct clk *, struct clk *); -}; - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h deleted file mode 100644 index 6350287a59b..00000000000 --- a/arch/arm/plat-mxc/include/mach/common.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_COMMON_H__ -#define __ASM_ARCH_MXC_COMMON_H__ - -struct platform_device; - -extern void mxc_map_io(void); -extern void mxc_init_irq(void); -extern void mxc_timer_init(const char *clk_timer); -extern int mxc_clocks_init(unsigned long fref); -extern int mxc_register_gpios(void); -extern int mxc_register_device(struct platform_device *pdev, void *data); - -#endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S deleted file mode 100644 index 602768b427e..00000000000 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ /dev/null @@ -1,52 +0,0 @@ -/* arch/arm/mach-imx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <mach/hardware.h> - -#ifdef CONFIG_MACH_MX31ADS -#include <mach/board-mx31ads.h> -#endif -#ifdef CONFIG_MACH_PCM037 -#include <mach/board-pcm037.h> -#endif -#ifdef CONFIG_MACH_MX31LITE -#include <mach/board-mx31lite.h> -#endif -#ifdef CONFIG_MACH_MX27ADS -#include <mach/board-mx27ads.h> -#endif -#ifdef CONFIG_MACH_PCM038 -#include <mach/board-pcm038.h> -#endif -#ifdef CONFIG_MACH_MX31_3DS -#include <mach/board-mx31pdk.h> -#endif - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MXC_LL_UART_PADDR @ physical - ldrne \rx, =MXC_LL_UART_VADDR @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h deleted file mode 100644 index b3876cc238c..00000000000 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de> - * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_DMA_H -#define __ASM_ARCH_MXC_DMA_H - -#define IMX_DMA_CHANNELS 16 - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR) - -#define IMX_DMA_MEMSIZE_32 (0 << 4) -#define IMX_DMA_MEMSIZE_8 (1 << 4) -#define IMX_DMA_MEMSIZE_16 (2 << 4) -#define IMX_DMA_TYPE_LINEAR (0 << 10) -#define IMX_DMA_TYPE_2D (1 << 10) -#define IMX_DMA_TYPE_FIFO (2 << 10) - -#define IMX_DMA_ERR_BURST (1 << 0) -#define IMX_DMA_ERR_REQUEST (1 << 1) -#define IMX_DMA_ERR_TRANSFER (1 << 2) -#define IMX_DMA_ERR_BUFFER (1 << 3) -#define IMX_DMA_ERR_TIMEOUT (1 << 4) - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining); - -void -imx_dma_config_burstlen(int channel, unsigned int burstlen); - -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode); - -int -imx_dma_setup_sg(int channel, struct scatterlist *sg, - unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)); - -void imx_dma_enable(int channel); - -void imx_dma_disable(int channel); - -int imx_dma_request(int channel, const char *name); - -void imx_dma_free(int channel); - -enum imx_dma_prio { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -}; - -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio); - -#endif /* _ASM_ARCH_MXC_DMA_H */ diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S deleted file mode 100644 index 5f01d60da84..00000000000 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <mach/hardware.h> - -#define AVIC_NIMASK 0x04 - - @ this macro disables fast irq (not implemented) - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR) -#ifdef CONFIG_MXC_IRQ_PRIOR - ldr r4, [\base, #AVIC_NIMASK] -#endif - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - @ this macro checks which interrupt occured - @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ Load offset & priority of the highest priority - @ interrupt pending from AVIC_NIVECSR - ldr \irqstat, [\base, #0x40] - @ Shift to get the decoded IRQ number, using ASR so - @ 'no interrupt pending' becomes 0xffffffff - mov \irqnr, \irqstat, asr #16 - @ set zero flag if IRQ + 1 == 0 - adds \tmp, \irqnr, #1 -#ifdef CONFIG_MXC_IRQ_PRIOR - bicne \tmp, \irqstat, #0xFFFFFFE0 - strne \tmp, [\base, #AVIC_NIMASK] - streq r4, [\base, #AVIC_NIMASK] -#endif - .endm - - @ irq priority table (not used) - .macro irq_prio_table - .endm diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h deleted file mode 100644 index ea509f1090f..00000000000 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_GPIO_H__ -#define __ASM_ARCH_MXC_GPIO_H__ - -#include <mach/hardware.h> -#include <asm-generic/gpio.h> - -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) -#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) - -struct mxc_gpio_port { - void __iomem *base; - int irq; - int virtual_irq_start; - struct gpio_chip chip; -}; - -int mxc_gpio_init(struct mxc_gpio_port*, int); - -#endif diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h deleted file mode 100644 index a612d8bb73c..00000000000 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#define __ASM_ARCH_MXC_HARDWARE_H__ - -#include <asm/sizes.h> - -#ifdef CONFIG_ARCH_MX3 -# include <mach/mx31.h> -#endif - -#ifdef CONFIG_ARCH_MX2 -# ifdef CONFIG_MACH_MX27 -# include <mach/mx27.h> -# endif -#endif - -#ifdef CONFIG_ARCH_MX1 -# include <mach/mx1.h> -#endif - -#include <mach/mxc.h> - -#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iim.h b/arch/arm/plat-mxc/include/mach/iim.h deleted file mode 100644 index 315bffadafd..00000000000 --- a/arch/arm/plat-mxc/include/mach/iim.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_IIM_H__ -#define __ASM_ARCH_MXC_IIM_H__ - -/* Register offsets */ -#define MXC_IIMSTAT 0x0000 -#define MXC_IIMSTATM 0x0004 -#define MXC_IIMERR 0x0008 -#define MXC_IIMEMASK 0x000C -#define MXC_IIMFCTL 0x0010 -#define MXC_IIMUA 0x0014 -#define MXC_IIMLA 0x0018 -#define MXC_IIMSDAT 0x001C -#define MXC_IIMPREV 0x0020 -#define MXC_IIMSREV 0x0024 -#define MXC_IIMPRG_P 0x0028 -#define MXC_IIMSCS0 0x002C -#define MXC_IIMSCS1 0x0030 -#define MXC_IIMSCS2 0x0034 -#define MXC_IIMSCS3 0x0038 -#define MXC_IIMFBAC0 0x0800 -#define MXC_IIMJAC 0x0804 -#define MXC_IIMHWV1 0x0808 -#define MXC_IIMHWV2 0x080C -#define MXC_IIMHAB0 0x0810 -#define MXC_IIMHAB1 0x0814 -/* Definitions for i.MX27 TO2 */ -#define MXC_IIMMAC 0x0814 -#define MXC_IIMPREV_FUSE 0x0818 -#define MXC_IIMSREV_FUSE 0x081C -#define MXC_IIMSJC_CHALL_0 0x0820 -#define MXC_IIMSJC_CHALL_7 0x083C -#define MXC_IIMFB0UC17 0x0840 -#define MXC_IIMFB0UC255 0x0BFC -#define MXC_IIMFBAC1 0x0C00 -/* Definitions for i.MX27 TO2 */ -#define MXC_IIMSUID 0x0C04 -#define MXC_IIMKEY0 0x0C04 -#define MXC_IIMKEY20 0x0C54 -#define MXC_IIMSJC_RESP_0 0x0C58 -#define MXC_IIMSJC_RESP_7 0x0C74 -#define MXC_IIMFB1UC30 0x0C78 -#define MXC_IIMFB1UC255 0x0FFC - -/* Bit definitions */ - -#define MXC_IIMHWV1_WLOCK (0x1 << 7) -#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6) -#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5) -#define MXC_IIMHWV1_BOOT_INT (0x1 << 4) -#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3) -#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2) -#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1) - -#define MXC_IIMHWV2_WLOCK (0x1 << 7) -#define MXC_IIMHWV2_BP_SDMA (0x1 << 6) -#define MXC_IIMHWV2_SCM_DCM (0x1 << 5) - -#endif /* __ASM_ARCH_MXC_IIM_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h deleted file mode 100644 index 83fb72c4048..00000000000 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - -#endif diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h deleted file mode 100644 index b4f2de76946..00000000000 --- a/arch/arm/plat-mxc/include/mach/io.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IO_H__ -#define __ASM_ARCH_MXC_IO_H__ - -/* Allow IO space to be anywhere in the memory */ -#define IO_SPACE_LIMIT 0xffffffff - -#ifdef CONFIG_ARCH_MX3 -#define __arch_ioremap __mx3_ioremap -#define __arch_iounmap __iounmap - -static inline void __iomem * -__mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) -{ - if (mtype == MT_DEVICE) { - /* Access all peripherals below 0x80000000 as nonshared device - * but leave l2cc alone. - */ - if ((phys_addr < 0x80000000) && ((phys_addr < 0x30000000) || - (phys_addr >= 0x30000000 + SZ_1M))) - mtype = MT_DEVICE_NONSHARED; - } - - return __arm_ioremap(phys_addr, size, mtype); -} -#endif - -/* io address mapping macro */ -#define __io(a) __typesafe_io(a) - -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h deleted file mode 100644 index 95a383be628..00000000000 --- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h +++ /dev/null @@ -1,416 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef _MXC_GPIO_MX1_MX2_H -#define _MXC_GPIO_MX1_MX2_H - -#include <linux/io.h> - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#ifdef CONFIG_ARCH_MX1 -# define GPIO_PORT_MAX 3 -#endif -#ifdef CONFIG_ARCH_MX2 -# define GPIO_PORT_MAX 5 -#endif - -#ifndef GPIO_PORT_MAX -# error "GPIO config port count unknown!" -#endif - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) - -extern void mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); - -/*-------------------------------------------------------------------------*/ - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#ifdef CONFIG_ARCH_MX1 -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_IN | GPIO_AF | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) -#endif - -#ifdef CONFIG_ARCH_MX2 -#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) -#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) -#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31) -#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) -#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) -#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) -#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) -#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) -#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21) -#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USB_OC_B (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBH1_OE_B (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) -#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) -#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) -#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6) -#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 7) -#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 8) -#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) -#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 10) -#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) -#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 12) -#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 13) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13) -#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) -#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) -#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) -#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) -#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) -#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23) -#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_OUT | GPIO_PF | 0) -#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_OUT | GPIO_PF | 1) -#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_OUT | GPIO_PF | 2) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) -#define PE16_AF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 16) -#define PE16_PF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 16) -#define PE18_PF_SDHC1_D0 (GPIO_PORTE | GPIO_PF | 18) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18) -#define PE19_PF_SDHC1_D1 (GPIO_PORTE | GPIO_PF | 19) -#define PE20_PF_SDHC1_D2 (GPIO_PORTE | GPIO_PF | 20) -#define PE21_PF_SDHC1_D3 (GPIO_PORTE | GPIO_PF | 21) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21) -#define PE22_PF_SDHC1_CMD (GPIO_PORTE | GPIO_PF | 22) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22) -#define PE22_PF_SDHC1_CLK (GPIO_PORTE | GPIO_PF | 23) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23) -#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 24) -#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_OUT | GPIO_PF | 25) -#endif - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - -#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) -#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) - -#endif /* _MXC_GPIO_MX1_MX2_H */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h deleted file mode 100644 index c9198c0aea1..00000000000 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ /dev/null @@ -1,538 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MX31_IOMUX_H__ -#define __MACH_MX31_IOMUX_H__ - -#include <linux/types.h> - -/* - * various IOMUX output functions - */ - -#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ -#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ -#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ -#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ -#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ -#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ -#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ -#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ -#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ -#define IOMUX_ICONFIG_FUNC 2 /* used as function */ -#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ -#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ - -#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) -#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) -#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) -#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) - -/* - * various IOMUX pad functions - */ -enum iomux_pad_config { - PAD_CTL_NOLOOPBACK = 0x0 << 9, - PAD_CTL_LOOPBACK = 0x1 << 9, - PAD_CTL_PKE_NONE = 0x0 << 8, - PAD_CTL_PKE_ENABLE = 0x1 << 8, - PAD_CTL_PUE_KEEPER = 0x0 << 7, - PAD_CTL_PUE_PUD = 0x1 << 7, - PAD_CTL_100K_PD = 0x0 << 5, - PAD_CTL_100K_PU = 0x1 << 5, - PAD_CTL_47K_PU = 0x2 << 5, - PAD_CTL_22K_PU = 0x3 << 5, - PAD_CTL_HYS_CMOS = 0x0 << 4, - PAD_CTL_HYS_SCHMITZ = 0x1 << 4, - PAD_CTL_ODE_CMOS = 0x0 << 3, - PAD_CTL_ODE_OpenDrain = 0x1 << 3, - PAD_CTL_DRV_NORMAL = 0x0 << 1, - PAD_CTL_DRV_HIGH = 0x1 << 1, - PAD_CTL_DRV_MAX = 0x2 << 1, - PAD_CTL_SRE_SLOW = 0x0 << 0, - PAD_CTL_SRE_FAST = 0x1 << 0 -}; - -/* - * various IOMUX general purpose functions - */ -enum iomux_gp_func { - MUX_PGP_FIRI = 1 << 0, - MUX_DDR_MODE = 1 << 1, - MUX_PGP_CSPI_BB = 1 << 2, - MUX_PGP_ATA_1 = 1 << 3, - MUX_PGP_ATA_2 = 1 << 4, - MUX_PGP_ATA_3 = 1 << 5, - MUX_PGP_ATA_4 = 1 << 6, - MUX_PGP_ATA_5 = 1 << 7, - MUX_PGP_ATA_6 = 1 << 8, - MUX_PGP_ATA_7 = 1 << 9, - MUX_PGP_ATA_8 = 1 << 10, - MUX_PGP_UH2 = 1 << 11, - MUX_SDCTL_CSD0_SEL = 1 << 12, - MUX_SDCTL_CSD1_SEL = 1 << 13, - MUX_CSPI1_UART3 = 1 << 14, - MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, - MUX_TAMPER_DETECT_EN = 1 << 16, - MUX_PGP_USB_4WIRE = 1 << 17, - MUX_PGB_USB_COMMON = 1 << 18, - MUX_SDHC_MEMSTICK1 = 1 << 19, - MUX_SDHC_MEMSTICK2 = 1 << 20, - MUX_PGP_SPLL_BYP = 1 << 21, - MUX_PGP_UPLL_BYP = 1 << 22, - MUX_PGP_MSHC1_CLK_SEL = 1 << 23, - MUX_PGP_MSHC2_CLK_SEL = 1 << 24, - MUX_CSPI3_UART5_SEL = 1 << 25, - MUX_PGP_ATA_9 = 1 << 26, - MUX_PGP_USB_SUSPEND = 1 << 27, - MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, - MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, - MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, - MUX_CLKO_DDR_MODE = 1 << 31, -}; - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void iomux_config_gpr(enum iomux_gp_func , bool); - -/* - * set the mode for a IOMUX pin. - */ -int mxc_iomux_mode(unsigned int); - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void mxc_iomux_set_gpr(enum iomux_gp_func, bool); - -#define IOMUX_PADNUM_MASK 0x1ff -#define IOMUX_GPIONUM_SHIFT 9 -#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) -#define IOMUX_MODE_SHIFT 17 -#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT) - -#define IOMUX_PIN(gpionum, padnum) \ - (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \ - (padnum & IOMUX_PADNUM_MASK)) - -#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT) - -#define IOMUX_TO_GPIO(iomux_pin) \ - ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) -#define IOMUX_TO_IRQ(iomux_pin) \ - (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \ - MXC_GPIO_IRQ_START) - -/* - * This enumeration is constructed based on the Section - * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated - * value is constructed based on the rules described above. - */ - -enum iomux_pins { - MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0), - MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1), - MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2), - MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3), - MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4), - MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5), - MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6), - MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7), - MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8), - MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9), - MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10), - MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11), - MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12), - MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13), - MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14), - MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15), - MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16), - MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17), - MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18), - MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), - MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), - MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), - MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), - MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), - MX31_PIN_READ = IOMUX_PIN(0xff, 24), - MX31_PIN_WRITE = IOMUX_PIN(0xff, 25), - MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26), - MX31_PIN_SER_RS = IOMUX_PIN(89, 27), - MX31_PIN_LCS1 = IOMUX_PIN(88, 28), - MX31_PIN_LCS0 = IOMUX_PIN(87, 29), - MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30), - MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31), - MX31_PIN_SD_D_I = IOMUX_PIN(84, 32), - MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), - MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), - MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), - MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36), - MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), - MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), - MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), - MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), - MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), - MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), - MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), - MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), - MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), - MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), - MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), - MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), - MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), - MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), - MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), - MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), - MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), - MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), - MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55), - MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56), - MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57), - MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58), - MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59), - MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60), - MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61), - MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62), - MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63), - MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64), - MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65), - MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66), - MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67), - MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68), - MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69), - MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70), - MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71), - MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72), - MX31_PIN_USB_BYP = IOMUX_PIN(31, 73), - MX31_PIN_USB_OC = IOMUX_PIN(30, 74), - MX31_PIN_USB_PWR = IOMUX_PIN(29, 75), - MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76), - MX31_PIN_DE_B = IOMUX_PIN(0xff, 77), - MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78), - MX31_PIN_TDO = IOMUX_PIN(0xff, 79), - MX31_PIN_TDI = IOMUX_PIN(0xff, 80), - MX31_PIN_TMS = IOMUX_PIN(0xff, 81), - MX31_PIN_TCK = IOMUX_PIN(0xff, 82), - MX31_PIN_RTCK = IOMUX_PIN(0xff, 83), - MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84), - MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85), - MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86), - MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87), - MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88), - MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89), - MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90), - MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91), - MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92), - MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93), - MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94), - MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95), - MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96), - MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97), - MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98), - MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99), - MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100), - MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101), - MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102), - MX31_PIN_TXD2 = IOMUX_PIN(28, 103), - MX31_PIN_RXD2 = IOMUX_PIN(27, 104), - MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105), - MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106), - MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107), - MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108), - MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109), - MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110), - MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111), - MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112), - MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113), - MX31_PIN_CTS1 = IOMUX_PIN(39, 114), - MX31_PIN_RTS1 = IOMUX_PIN(38, 115), - MX31_PIN_TXD1 = IOMUX_PIN(37, 116), - MX31_PIN_RXD1 = IOMUX_PIN(36, 117), - MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118), - MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119), - MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120), - MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121), - MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122), - MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123), - MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124), - MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125), - MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126), - MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127), - MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128), - MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129), - MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130), - MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131), - MX31_PIN_SFS6 = IOMUX_PIN(26, 132), - MX31_PIN_SCK6 = IOMUX_PIN(25, 133), - MX31_PIN_SRXD6 = IOMUX_PIN(24, 134), - MX31_PIN_STXD6 = IOMUX_PIN(23, 135), - MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136), - MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137), - MX31_PIN_SRXD5 = IOMUX_PIN(22, 138), - MX31_PIN_STXD5 = IOMUX_PIN(21, 139), - MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140), - MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141), - MX31_PIN_SRXD4 = IOMUX_PIN(20, 142), - MX31_PIN_STXD4 = IOMUX_PIN(19, 143), - MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144), - MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145), - MX31_PIN_SRXD3 = IOMUX_PIN(18, 146), - MX31_PIN_STXD3 = IOMUX_PIN(17, 147), - MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148), - MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149), - MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150), - MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151), - MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152), - MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153), - MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154), - MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155), - MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156), - MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157), - MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158), - MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159), - MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160), - MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161), - MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162), - MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163), - MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164), - MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165), - MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166), - MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167), - MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168), - MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169), - MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170), - MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171), - MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172), - MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173), - MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174), - MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175), - MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176), - MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177), - MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178), - MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179), - MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180), - MX31_PIN_D0 = IOMUX_PIN(0xff, 181), - MX31_PIN_D1 = IOMUX_PIN(0xff, 182), - MX31_PIN_D2 = IOMUX_PIN(0xff, 183), - MX31_PIN_D3 = IOMUX_PIN(0xff, 184), - MX31_PIN_D4 = IOMUX_PIN(0xff, 185), - MX31_PIN_D5 = IOMUX_PIN(0xff, 186), - MX31_PIN_D6 = IOMUX_PIN(0xff, 187), - MX31_PIN_D7 = IOMUX_PIN(0xff, 188), - MX31_PIN_D8 = IOMUX_PIN(0xff, 189), - MX31_PIN_D9 = IOMUX_PIN(0xff, 190), - MX31_PIN_D10 = IOMUX_PIN(0xff, 191), - MX31_PIN_D11 = IOMUX_PIN(0xff, 192), - MX31_PIN_D12 = IOMUX_PIN(0xff, 193), - MX31_PIN_D13 = IOMUX_PIN(0xff, 194), - MX31_PIN_D14 = IOMUX_PIN(0xff, 195), - MX31_PIN_D15 = IOMUX_PIN(0xff, 196), - MX31_PIN_NFRB = IOMUX_PIN(16, 197), - MX31_PIN_NFCE_B = IOMUX_PIN(15, 198), - MX31_PIN_NFWP_B = IOMUX_PIN(14, 199), - MX31_PIN_NFCLE = IOMUX_PIN(13, 200), - MX31_PIN_NFALE = IOMUX_PIN(12, 201), - MX31_PIN_NFRE_B = IOMUX_PIN(11, 202), - MX31_PIN_NFWE_B = IOMUX_PIN(10, 203), - MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204), - MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205), - MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206), - MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207), - MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208), - MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209), - MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210), - MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211), - MX31_PIN_SDWE = IOMUX_PIN(0xff, 212), - MX31_PIN_CAS = IOMUX_PIN(0xff, 213), - MX31_PIN_RAS = IOMUX_PIN(0xff, 214), - MX31_PIN_RW = IOMUX_PIN(0xff, 215), - MX31_PIN_BCLK = IOMUX_PIN(0xff, 216), - MX31_PIN_LBA = IOMUX_PIN(0xff, 217), - MX31_PIN_ECB = IOMUX_PIN(0xff, 218), - MX31_PIN_CS5 = IOMUX_PIN(0xff, 219), - MX31_PIN_CS4 = IOMUX_PIN(0xff, 220), - MX31_PIN_CS3 = IOMUX_PIN(0xff, 221), - MX31_PIN_CS2 = IOMUX_PIN(0xff, 222), - MX31_PIN_CS1 = IOMUX_PIN(0xff, 223), - MX31_PIN_CS0 = IOMUX_PIN(0xff, 224), - MX31_PIN_OE = IOMUX_PIN(0xff, 225), - MX31_PIN_EB1 = IOMUX_PIN(0xff, 226), - MX31_PIN_EB0 = IOMUX_PIN(0xff, 227), - MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228), - MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229), - MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230), - MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231), - MX31_PIN_SD31 = IOMUX_PIN(0xff, 232), - MX31_PIN_SD30 = IOMUX_PIN(0xff, 233), - MX31_PIN_SD29 = IOMUX_PIN(0xff, 234), - MX31_PIN_SD28 = IOMUX_PIN(0xff, 235), - MX31_PIN_SD27 = IOMUX_PIN(0xff, 236), - MX31_PIN_SD26 = IOMUX_PIN(0xff, 237), - MX31_PIN_SD25 = IOMUX_PIN(0xff, 238), - MX31_PIN_SD24 = IOMUX_PIN(0xff, 239), - MX31_PIN_SD23 = IOMUX_PIN(0xff, 240), - MX31_PIN_SD22 = IOMUX_PIN(0xff, 241), - MX31_PIN_SD21 = IOMUX_PIN(0xff, 242), - MX31_PIN_SD20 = IOMUX_PIN(0xff, 243), - MX31_PIN_SD19 = IOMUX_PIN(0xff, 244), - MX31_PIN_SD18 = IOMUX_PIN(0xff, 245), - MX31_PIN_SD17 = IOMUX_PIN(0xff, 246), - MX31_PIN_SD16 = IOMUX_PIN(0xff, 247), - MX31_PIN_SD15 = IOMUX_PIN(0xff, 248), - MX31_PIN_SD14 = IOMUX_PIN(0xff, 249), - MX31_PIN_SD13 = IOMUX_PIN(0xff, 250), - MX31_PIN_SD12 = IOMUX_PIN(0xff, 251), - MX31_PIN_SD11 = IOMUX_PIN(0xff, 252), - MX31_PIN_SD10 = IOMUX_PIN(0xff, 253), - MX31_PIN_SD9 = IOMUX_PIN(0xff, 254), - MX31_PIN_SD8 = IOMUX_PIN(0xff, 255), - MX31_PIN_SD7 = IOMUX_PIN(0xff, 256), - MX31_PIN_SD6 = IOMUX_PIN(0xff, 257), - MX31_PIN_SD5 = IOMUX_PIN(0xff, 258), - MX31_PIN_SD4 = IOMUX_PIN(0xff, 259), - MX31_PIN_SD3 = IOMUX_PIN(0xff, 260), - MX31_PIN_SD2 = IOMUX_PIN(0xff, 261), - MX31_PIN_SD1 = IOMUX_PIN(0xff, 262), - MX31_PIN_SD0 = IOMUX_PIN(0xff, 263), - MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264), - MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265), - MX31_PIN_A25 = IOMUX_PIN(0xff, 266), - MX31_PIN_A24 = IOMUX_PIN(0xff, 267), - MX31_PIN_A23 = IOMUX_PIN(0xff, 268), - MX31_PIN_A22 = IOMUX_PIN(0xff, 269), - MX31_PIN_A21 = IOMUX_PIN(0xff, 270), - MX31_PIN_A20 = IOMUX_PIN(0xff, 271), - MX31_PIN_A19 = IOMUX_PIN(0xff, 272), - MX31_PIN_A18 = IOMUX_PIN(0xff, 273), - MX31_PIN_A17 = IOMUX_PIN(0xff, 274), - MX31_PIN_A16 = IOMUX_PIN(0xff, 275), - MX31_PIN_A14 = IOMUX_PIN(0xff, 276), - MX31_PIN_A15 = IOMUX_PIN(0xff, 277), - MX31_PIN_A13 = IOMUX_PIN(0xff, 278), - MX31_PIN_A12 = IOMUX_PIN(0xff, 279), - MX31_PIN_A11 = IOMUX_PIN(0xff, 280), - MX31_PIN_MA10 = IOMUX_PIN(0xff, 281), - MX31_PIN_A10 = IOMUX_PIN(0xff, 282), - MX31_PIN_A9 = IOMUX_PIN(0xff, 283), - MX31_PIN_A8 = IOMUX_PIN(0xff, 284), - MX31_PIN_A7 = IOMUX_PIN(0xff, 285), - MX31_PIN_A6 = IOMUX_PIN(0xff, 286), - MX31_PIN_A5 = IOMUX_PIN(0xff, 287), - MX31_PIN_A4 = IOMUX_PIN(0xff, 288), - MX31_PIN_A3 = IOMUX_PIN(0xff, 289), - MX31_PIN_A2 = IOMUX_PIN(0xff, 290), - MX31_PIN_A1 = IOMUX_PIN(0xff, 291), - MX31_PIN_A0 = IOMUX_PIN(0xff, 292), - MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293), - MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294), - MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295), - MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296), - MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297), - MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298), - MX31_PIN_CKIL = IOMUX_PIN(0xff, 299), - MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300), - MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301), - MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302), - MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303), - MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304), - MX31_PIN_CLKO = IOMUX_PIN(0xff, 305), - MX31_PIN_POR_B = IOMUX_PIN(0xff, 306), - MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307), - MX31_PIN_CKIH = IOMUX_PIN(0xff, 308), - MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309), - MX31_PIN_SRX0 = IOMUX_PIN(34, 310), - MX31_PIN_STX0 = IOMUX_PIN(33, 311), - MX31_PIN_SVEN0 = IOMUX_PIN(32, 312), - MX31_PIN_SRST0 = IOMUX_PIN(67, 313), - MX31_PIN_SCLK0 = IOMUX_PIN(66, 314), - MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315), - MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316), - MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317), - MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318), - MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319), - MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320), - MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321), - MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322), - MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323), - MX31_PIN_PWMO = IOMUX_PIN( 9, 324), - MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325), - MX31_PIN_COMPARE = IOMUX_PIN( 8, 326), - MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), -}; - -/* - * Convenience values for use with mxc_iomux_mode() - * - * Format here is MX31_PIN_(pin name)__(function) - */ -#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2) -#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2) -#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2) -#define MX31_PIN_PC_BVD1__RXD5 IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC) -#define MX31_PIN_BATT_LINE__OWIRE IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CS4__CS4 IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA3__SD1_DATA3 IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA2__SD1_DATA2 IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA1__SD1_DATA1 IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) - -/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 - * cspi1_ss1*/ - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins, u32); - -#endif - diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h deleted file mode 100644 index e06d3cb0ee1..00000000000 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IRQS_H__ -#define __ASM_ARCH_MXC_IRQS_H__ - -/* - * So far all i.MX SoCs have 64 internal interrupts - */ -#define MXC_INTERNAL_IRQS 64 - -#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS - -#if defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX2 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) -#endif - -/* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase MXC_BOARD_IRQS, but keep it - * within sensible limits. - */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) -#define MXC_BOARD_IRQS 16 - -#define NR_IRQS (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) - -extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch betwean IRQ and FIQ */ -extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); - -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h deleted file mode 100644 index 0b808399097..00000000000 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MEMORY_H__ -#define __ASM_ARCH_MXC_MEMORY_H__ - -#if defined CONFIG_ARCH_MX1 -#define PHYS_OFFSET UL(0x08000000) -#elif defined CONFIG_ARCH_MX2 -#define PHYS_OFFSET UL(0xA0000000) -#elif defined CONFIG_ARCH_MX3 -#define PHYS_OFFSET UL(0x80000000) -#endif - -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h deleted file mode 100644 index 1ab1bba5688..00000000000 --- a/arch/arm/plat-mxc/include/mach/mtd-xip.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <mach/mxc_timer.h> - -#ifndef __ARCH_IMX_MTD_XIP_H__ -#define __ARCH_IMX_MTD_XIP_H__ - -#ifdef CONFIG_ARCH_MX1 -/* AITC registers */ -#define AITC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define NIPNDH (AITC_BASE + 0x58) -#define NIPNDL (AITC_BASE + 0x5C) -#define INTENABLEH (AITC_BASE + 0x10) -#define INTENABLEL (AITC_BASE + 0x14) -/* MTD macros */ -#define xip_irqpending() ((__raw_readl(INTENABLEH) & __raw_readl(NIPNDH)) \ - || (__raw_readl(INTENABLEL) & __raw_readl(NIPNDL))) -#define xip_currtime() (__raw_readl(TIMER_BASE + MXC_TCN)) -#define xip_elapsed_since(x) (signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96) -#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0)) -#endif /* CONFIG_ARCH_MX1 */ - -#endif /* __ARCH_IMX_MTD_XIP_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h deleted file mode 100644 index b92e02324d8..00000000000 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Copyright (C) 1997,1998 Russell King - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MX1_H__ -#define __ASM_ARCH_MXC_MX1_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -#include <mach/vmalloc.h> - -/* - * Memory map - */ -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE VMALLOC_END - -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 - -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 - -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 - -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 - -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 - -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 - -/* - * Register BASEs, based on OFFSETs - */ -#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS) -#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS) -#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS) -#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS) -#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS) -#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS) -#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS) -#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS) -#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS) -#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS) -#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS) -#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS) -#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS) -#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS) -#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS) -#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS) -#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS) -#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS) -#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS) -#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS) -#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS) -#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS) -#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS) -#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS) -#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS) -#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS) -#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS) -#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS) -#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS) - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE) - -/* define macros needed for entry-macro.S */ -#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) - -/* fixed interrput numbers */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 -#define WDT_INT 63 - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x1C -#define GPIO_GDIR 0x00 -#define GPIO_PSR 0x24 -#define GPIO_ICR1 0x28 -#define GPIO_ICR2 0x2C -#define GPIO_IMR 0x30 -#define GPIO_ISR 0x34 -#define GPIO_INT_LOW_LEV 0x3 -#define GPIO_INT_HIGH_LEV 0x2 -#define GPIO_INT_RISE_EDGE 0x0 -#define GPIO_INT_FALL_EDGE 0x1 -#define GPIO_INT_NONE 0x4 - -/* DMA */ -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20 + (x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -/* mandatory for CONFIG_LL_DEBUG */ -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h deleted file mode 100644 index 0313be72055..00000000000 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ /dev/null @@ -1,292 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_MX27_H__ -#define __ASM_ARCH_MXC_MX27_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* IRAM */ -#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ - -/* Register offests */ -#define AIPI_BASE_ADDR 0x10000000 -#define AIPI_BASE_ADDR_VIRT 0xF4000000 -#define AIPI_SIZE SZ_1M - -#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) -#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) -#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) -#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) -#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) -#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) -#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) -#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) -#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) -#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) -#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) -#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) -#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) -#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) -#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) -#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) -#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) -#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) -#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) -#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) -#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) -#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) - -#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) -#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000) -#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000) -#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000) -#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000) -#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000) -#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000) -#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000) -#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000) - -#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) -#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) -#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000) -#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) -/* for mx27*/ -#define OTG_BASE_ADDR USBOTG_BASE_ADDR -#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000) -#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000) -#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) -#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) -#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) -#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000) - -#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000) -#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000) -#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000) -#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000) -#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000) - -#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) -#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) - -/* ROMP and AVIC */ -#define ROMP_BASE_ADDR 0x10041000 - -#define AVIC_BASE_ADDR 0x10040000 - -#define SAHB1_BASE_ADDR 0x80000000 -#define SAHB1_BASE_ADDR_VIRT 0xF4100000 -#define SAHB1_SIZE SZ_1M - -#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) -#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000) - -/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ -#define X_MEMC_BASE_ADDR 0xD8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 -#define X_MEMC_SIZE SZ_1M - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) -#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) - -/* Memory regions and CS */ -#define SDRAM_BASE_ADDR 0xA0000000 -#define CSD1_BASE_ADDR 0xB0000000 - -#define CS0_BASE_ADDR 0xC0000000 -#define CS1_BASE_ADDR 0xC8000000 -#define CS2_BASE_ADDR 0xD0000000 -#define CS3_BASE_ADDR 0xD2000000 -#define CS4_BASE_ADDR 0xD4000000 -#define CS5_BASE_ADDR 0xD6000000 -#define PCMCIA_MEM_BASE_ADDR 0xDC000000 - -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (void __iomem *) \ - (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ - AIPI_IO_ADDRESS(x) : \ - ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ - SAHB1_IO_ADDRESS(x) : \ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ - X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) - -/* define the address mapping macros: in physical address order */ -#define AIPI_IO_ADDRESS(x) \ - (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) - -#define SAHB1_IO_ADDRESS(x) \ - (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* fixed interrput numbers */ -#define MXC_INT_CCM 63 -#define MXC_INT_IIM 62 -#define MXC_INT_LCDC 61 -#define MXC_INT_SLCDC 60 -#define MXC_INT_SAHARA 59 -#define MXC_INT_SCC_SCM 58 -#define MXC_INT_SCC_SMN 57 -#define MXC_INT_USB3 56 -#define MXC_INT_USB2 55 -#define MXC_INT_USB1 54 -#define MXC_INT_VPU 53 -#define MXC_INT_EMMAPP 52 -#define MXC_INT_EMMAPRP 51 -#define MXC_INT_FEC 50 -#define MXC_INT_UART5 49 -#define MXC_INT_UART6 48 -#define MXC_INT_DMACH15 47 -#define MXC_INT_DMACH14 46 -#define MXC_INT_DMACH13 45 -#define MXC_INT_DMACH12 44 -#define MXC_INT_DMACH11 43 -#define MXC_INT_DMACH10 42 -#define MXC_INT_DMACH9 41 -#define MXC_INT_DMACH8 40 -#define MXC_INT_DMACH7 39 -#define MXC_INT_DMACH6 38 -#define MXC_INT_DMACH5 37 -#define MXC_INT_DMACH4 36 -#define MXC_INT_DMACH3 35 -#define MXC_INT_DMACH2 34 -#define MXC_INT_DMACH1 33 -#define MXC_INT_DMACH0 32 -#define MXC_INT_CSI 31 -#define MXC_INT_ATA 30 -#define MXC_INT_NANDFC 29 -#define MXC_INT_PCMCIA 28 -#define MXC_INT_WDOG 27 -#define MXC_INT_GPT1 26 -#define MXC_INT_GPT2 25 -#define MXC_INT_GPT3 24 -#define MXC_INT_GPT INT_GPT1 -#define MXC_INT_PWM 23 -#define MXC_INT_RTC 22 -#define MXC_INT_KPP 21 -#define MXC_INT_UART1 20 -#define MXC_INT_UART2 19 -#define MXC_INT_UART3 18 -#define MXC_INT_UART4 17 -#define MXC_INT_CSPI1 16 -#define MXC_INT_CSPI2 15 -#define MXC_INT_SSI1 14 -#define MXC_INT_SSI2 13 -#define MXC_INT_I2C 12 -#define MXC_INT_SDHC1 11 -#define MXC_INT_SDHC2 10 -#define MXC_INT_SDHC3 9 -#define MXC_INT_GPIO 8 -#define MXC_INT_SDHC 7 -#define MXC_INT_CSPI3 6 -#define MXC_INT_RTIC 5 -#define MXC_INT_GPT4 4 -#define MXC_INT_GPT5 3 -#define MXC_INT_GPT6 2 -#define MXC_INT_I2C2 1 - -/* fixed DMA request numbers */ -#define DMA_REQ_NFC 37 -#define DMA_REQ_SDHC3 36 -#define DMA_REQ_UART6_RX 35 -#define DMA_REQ_UART6_TX 34 -#define DMA_REQ_UART5_RX 33 -#define DMA_REQ_UART5_TX 32 -#define DMA_REQ_CSI_RX 31 -#define DMA_REQ_CSI_STAT 30 -#define DMA_REQ_ATA_RCV 29 -#define DMA_REQ_ATA_TX 28 -#define DMA_REQ_UART1_TX 27 -#define DMA_REQ_UART1_RX 26 -#define DMA_REQ_UART2_TX 25 -#define DMA_REQ_UART2_RX 24 -#define DMA_REQ_UART3_TX 23 -#define DMA_REQ_UART3_RX 22 -#define DMA_REQ_UART4_TX 21 -#define DMA_REQ_UART4_RX 20 -#define DMA_REQ_CSPI1_TX 19 -#define DMA_REQ_CSPI1_RX 18 -#define DMA_REQ_CSPI2_TX 17 -#define DMA_REQ_CSPI2_RX 16 -#define DMA_REQ_SSI1_TX1 15 -#define DMA_REQ_SSI1_RX1 14 -#define DMA_REQ_SSI1_TX0 13 -#define DMA_REQ_SSI1_RX0 12 -#define DMA_REQ_SSI2_TX1 11 -#define DMA_REQ_SSI2_RX1 10 -#define DMA_REQ_SSI2_TX0 9 -#define DMA_REQ_SSI2_RX0 8 -#define DMA_REQ_SDHC1 7 -#define DMA_REQ_SDHC2 6 -#define DMA_REQ_MSHC 4 -#define DMA_REQ_EXT 3 -#define DMA_REQ_CSPI3_TX 2 -#define DMA_REQ_CSPI3_RX 1 - -/* silicon revisions specific to i.MX27 */ -#define CHIP_REV_1_0 0x00 -#define CHIP_REV_2_0 0x01 - -#ifndef __ASSEMBLY__ -extern int mx27_revision(void); -#endif - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x1C -#define GPIO_GDIR 0x00 -#define GPIO_PSR 0x24 -#define GPIO_ICR1 0x28 -#define GPIO_ICR2 0x2C -#define GPIO_IMR 0x30 -#define GPIO_ISR 0x34 -#define GPIO_INT_LOW_LEV 0x3 -#define GPIO_INT_HIGH_LEV 0x2 -#define GPIO_INT_RISE_EDGE 0x0 -#define GPIO_INT_FALL_EDGE 0x1 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this is an i.MX27 CPU */ -#define cpu_is_mx27() (1) - -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (192 + 16) - -#endif /* __ASM_ARCH_MXC_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h deleted file mode 100644 index de026654b00..00000000000 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ /dev/null @@ -1,360 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* - * MX31 memory map: - * - * Virt Phys Size What - * --------------------------------------------------------------------------- - * F8000000 1FFC0000 16K IRAM - * F9000000 30000000 256M L2CC - * FC000000 43F00000 1M AIPS 1 - * FC100000 50000000 1M SPBA - * FC200000 53F00000 1M AIPS 2 - * FC500000 60000000 128M ROMPATCH - * FC400000 68000000 128M AVIC - * 70000000 256M IPU (MAX M2) - * 80000000 256M CSD0 SDRAM/DDR - * 90000000 256M CSD1 SDRAM/DDR - * A0000000 128M CS0 Flash - * A8000000 128M CS1 Flash - * B0000000 32M CS2 - * B2000000 32M CS3 - * F4000000 B4000000 32M CS4 - * B6000000 32M CS5 - * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers - * C0000000 64M PCMCIA/CF - */ - -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/* - * IRAM - */ -#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ -#define IRAM_BASE_ADDR_VIRT 0xF8000000 -#define IRAM_SIZE SZ_16K - -/* - * L2CC - */ -#define L2CC_BASE_ADDR 0x30000000 -#define L2CC_BASE_ADDR_VIRT 0xF9000000 -#define L2CC_SIZE SZ_1M - -/* - * AIPS 1 - */ -#define AIPS1_BASE_ADDR 0x43F00000 -#define AIPS1_BASE_ADDR_VIRT 0xFC000000 -#define AIPS1_SIZE SZ_1M - -#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) -#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) -#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) -#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) -#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) -#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) -#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) -#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) -#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) -#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) -#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) -#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) -#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) -#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) -#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) -#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) -#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) -#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) -#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) - -/* - * SPBA global module enabled #0 - */ -#define SPBA0_BASE_ADDR 0x50000000 -#define SPBA0_BASE_ADDR_VIRT 0xFC100000 -#define SPBA0_SIZE SZ_1M - -#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) -#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) -#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) -#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) -#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) -#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000) -#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) -#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) - -/* - * AIPS 2 - */ -#define AIPS2_BASE_ADDR 0x53F00000 -#define AIPS2_BASE_ADDR_VIRT 0xFC200000 -#define AIPS2_SIZE SZ_1M -#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) -#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) -#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) -#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) -#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) -#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) -#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) -#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) -#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000) -#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000) -#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) -#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) -#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) -#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) -#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) -#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) -#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) -#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) -#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) -#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) -#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) - -/* - * ROMP and AVIC - */ -#define ROMP_BASE_ADDR 0x60000000 -#define ROMP_BASE_ADDR_VIRT 0xFC500000 -#define ROMP_SIZE SZ_1M - -#define AVIC_BASE_ADDR 0x68000000 -#define AVIC_BASE_ADDR_VIRT 0xFC400000 -#define AVIC_SIZE SZ_1M - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ -#define X_MEMC_BASE_ADDR 0xB8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 -#define X_MEMC_SIZE SZ_64K - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) -#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR - -/* - * Memory regions and CS - */ -#define IPU_MEM_BASE_ADDR 0x70000000 -#define CSD0_BASE_ADDR 0x80000000 -#define CSD1_BASE_ADDR 0x90000000 -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/*! - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (void __iomem *) \ - (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\ - ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\ - ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ - ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ - ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ - ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ - ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ - ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ - -#define IRAM_IO_ADDRESS(x) \ - (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT) - -#define L2CC_IO_ADDRESS(x) \ - (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) - -#define AIPS1_IO_ADDRESS(x) \ - (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) - -#define SPBA0_IO_ADDRESS(x) \ - (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) - -#define AIPS2_IO_ADDRESS(x) \ - (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) - -#define ROMP_IO_ADDRESS(x) \ - (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) \ - (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* - * Interrupt numbers - */ -#define MXC_INT_PEN_ADS7843 0 -#define MXC_INT_RESV1 1 -#define MXC_INT_CS8900A 2 -#define MXC_INT_I2C3 3 -#define MXC_INT_I2C2 4 -#define MXC_INT_MPEG4_ENCODER 5 -#define MXC_INT_RTIC 6 -#define MXC_INT_FIRI 7 -#define MXC_INT_MMC_SDHC2 8 -#define MXC_INT_MMC_SDHC1 9 -#define MXC_INT_I2C 10 -#define MXC_INT_SSI2 11 -#define MXC_INT_SSI1 12 -#define MXC_INT_CSPI2 13 -#define MXC_INT_CSPI1 14 -#define MXC_INT_ATA 15 -#define MXC_INT_MBX 16 -#define MXC_INT_CSPI3 17 -#define MXC_INT_UART3 18 -#define MXC_INT_IIM 19 -#define MXC_INT_SIM2 20 -#define MXC_INT_SIM1 21 -#define MXC_INT_RNGA 22 -#define MXC_INT_EVTMON 23 -#define MXC_INT_KPP 24 -#define MXC_INT_RTC 25 -#define MXC_INT_PWM 26 -#define MXC_INT_EPIT2 27 -#define MXC_INT_EPIT1 28 -#define MXC_INT_GPT 29 -#define MXC_INT_RESV30 30 -#define MXC_INT_RESV31 31 -#define MXC_INT_UART2 32 -#define MXC_INT_NANDFC 33 -#define MXC_INT_SDMA 34 -#define MXC_INT_USB1 35 -#define MXC_INT_USB2 36 -#define MXC_INT_USB3 37 -#define MXC_INT_USB4 38 -#define MXC_INT_MSHC1 39 -#define MXC_INT_MSHC2 40 -#define MXC_INT_IPU_ERR 41 -#define MXC_INT_IPU_SYN 42 -#define MXC_INT_RESV43 43 -#define MXC_INT_RESV44 44 -#define MXC_INT_UART1 45 -#define MXC_INT_UART4 46 -#define MXC_INT_UART5 47 -#define MXC_INT_ECT 48 -#define MXC_INT_SCC_SCM 49 -#define MXC_INT_SCC_SMN 50 -#define MXC_INT_GPIO2 51 -#define MXC_INT_GPIO1 52 -#define MXC_INT_CCM 53 -#define MXC_INT_PCMCIA 54 -#define MXC_INT_WDOG 55 -#define MXC_INT_GPIO3 56 -#define MXC_INT_RESV57 57 -#define MXC_INT_EXT_POWER 58 -#define MXC_INT_EXT_TEMPER 59 -#define MXC_INT_EXT_SENSOR60 60 -#define MXC_INT_EXT_SENSOR61 61 -#define MXC_INT_EXT_WDOG 62 -#define MXC_INT_EXT_TV 63 - -#define PROD_SIGNATURE 0x1 /* For MX31 */ - -/* silicon revisions specific to i.MX31 */ -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_1_2 0x12 -#define CHIP_REV_1_3 0x13 -#define CHIP_REV_2_0 0x20 -#define CHIP_REV_2_1 0x21 -#define CHIP_REV_2_2 0x22 -#define CHIP_REV_2_3 0x23 -#define CHIP_REV_3_0 0x30 -#define CHIP_REV_3_1 0x31 -#define CHIP_REV_3_2 0x32 - -#define SYSTEM_REV_MIN CHIP_REV_1_0 -#define SYSTEM_REV_NUM 3 - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x00 -#define GPIO_GDIR 0x04 -#define GPIO_PSR 0x08 -#define GPIO_ICR1 0x0C -#define GPIO_ICR2 0x10 -#define GPIO_IMR 0x14 -#define GPIO_ISR 0x18 -#define GPIO_INT_LOW_LEV 0x0 -#define GPIO_INT_HIGH_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_FALL_EDGE 0x3 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this CPU supports up to 96 GPIOs */ -#define ARCH_NR_GPIOS 96 - -#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - -/* this is a i.MX31 CPU */ -#define cpu_is_mx31() (1) - -extern unsigned int system_rev; - -static inline int mx31_revision(void) -{ - return system_rev; -} -#endif - -#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h deleted file mode 100644 index f6caab06213..00000000000 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_H__ -#define __ASM_ARCH_MXC_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* clean up all things that are not used */ -#ifndef CONFIG_ARCH_MX3 -# define cpu_is_mx31() (0) -#endif - -#ifndef CONFIG_MACH_MX27 -# define cpu_is_mx27() (0) -#endif - -#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) -#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10) -#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4) -#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8) -#endif - -#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h deleted file mode 100644 index 2b972df22d1..00000000000 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_NAND_H -#define __ASM_ARCH_NAND_H - -struct mxc_nand_platform_data { - int width; /* data bus width in bytes */ - int hw_ecc; /* 0 if supress hardware ECC */ -}; -#endif /* __ASM_ARCH_NAND_H */ diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h deleted file mode 100644 index 6c19a134744..00000000000 --- a/arch/arm/plat-mxc/include/mach/mxc_timer.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * mxc_timer.h - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef __PLAT_MXC_TIMER_H -#define __PLAT_MXC_TIMER_H - -#include <linux/clk.h> -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_MX1 -#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) -#define TIMER_INTERRUPT TIM1_INT - -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) - -#define MXC_TCTL 0x00 -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(0, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX1 */ - -#ifdef CONFIG_ARCH_MX2 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT1 - -#define MXC_TCTL 0x00 -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX2 */ - -#ifdef CONFIG_ARCH_MX3 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT - -#define MXC_TCTL 0x00 -#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) -#define TCTL_CLK_IPG (1<<6) -#define TCTL_FRR (1<<9) -#define TCTL_WAITEN (1<<3) - -#define MXC_TPRER 0x04 -#define MXC_TSTAT 0x08 -#define TSTAT_OF1 (1<<0) -#define TSTAT_OF2 (1<<1) -#define TSTAT_OF3 (1<<2) -#define TSTAT_IF1 (1<<3) -#define TSTAT_IF2 (1<<4) -#define TSTAT_ROV (1<<5) -#define MXC_IR 0x0c -#define MXC_TCMP 0x10 -#define MXC_TCMP2 0x14 -#define MXC_TCMP3 0x18 -#define MXC_TCR 0x1c -#define MXC_TCN 0x24 - -static inline void gpt_irq_disable(void) -{ - __raw_writel(0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(1<<0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX3 */ - -#define TCTL_SWR (1<<15) -#define TCTL_CC (1<<10) -#define TCTL_OM (1<<9) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_CAP_ENA (1<<5) -#define TCTL_TEN (1<<0) - -#endif diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h deleted file mode 100644 index bbfc37465fc..00000000000 --- a/arch/arm/plat-mxc/include/mach/system.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_SYSTEM_H__ -#define __ASM_ARCH_MXC_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h deleted file mode 100644 index 07b4a73c9d2..00000000000 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_TIMEX_H__ -#define __ASM_ARCH_MXC_TIMEX_H__ - -#if defined CONFIG_ARCH_MX1 -#define CLOCK_TICK_RATE 16000000 -#elif defined CONFIG_ARCH_MX2 -#define CLOCK_TICK_RATE 13300000 -#elif defined CONFIG_ARCH_MX3 -#define CLOCK_TICK_RATE 16625000 -#endif - -#endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h deleted file mode 100644 index de6fe036598..00000000000 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * arch/arm/plat-mxc/include/mach/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ -#define __ASM_ARCH_MXC_UNCOMPRESS_H__ - -#define __MXC_BOOT_UNCOMPRESS - -#include <mach/hardware.h> - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -static void putc(int ch) -{ - static unsigned long serial_port = 0; - - if (unlikely(serial_port == 0)) { - do { - serial_port = UART1_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - serial_port = UART2_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - return; - } while (0); - } - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = ch; -} - -#define flush() do { } while (0) - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h deleted file mode 100644 index 62d97623412..00000000000 --- a/arch/arm/plat-mxc/include/mach/vmalloc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2000 Russell King. - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_VMALLOC_H__ -#define __ASM_ARCH_MXC_VMALLOC_H__ - -/* vmalloc ending address */ -#define VMALLOC_END 0xF4000000 - -#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c deleted file mode 100644 index df6f1839568..00000000000 --- a/arch/arm/plat-mxc/iomux-mx1-mx2.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * arch/arm/mach-mxc/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <asm/mach/map.h> -#include <mach/iomux-mx1-mx2.h> - -void mxc_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port)); - if (gpio_mode & GPIO_PUEN) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port)); - - /* Data direction */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port)); - if (gpio_mode & GPIO_OUT) - tmp |= 1 << pin; - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port)); - - /* Primary / alternate function */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port)); - if (gpio_mode & GPIO_AF) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port)); - - /* use as gpio? */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port)); - if (gpio_mode & (GPIO_PF | GPIO_AF)) - tmp &= ~(1 << pin); - else - tmp |= (1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port)); - - if (pin < 16) { - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port)); - } else { - pin -= 16; - - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port)); - } -} -EXPORT_SYMBOL(mxc_gpio_mode); - -int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - ret = gpio_request(gpio, label); - if (ret) - goto setup_error; - - mxc_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - mxc_gpio_release_multiple_pins(pin_list, i); - return ret; -} -EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); - -void mxc_gpio_release_multiple_pins(const int *pin_list, int count) -{ - const int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - gpio_free(gpio); - p++; - } - -} -EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); - diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c deleted file mode 100644 index 6e7578a3514..00000000000 --- a/arch/arm/plat-mxc/irq.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <mach/common.h> -#include <asm/mach/irq.h> -#include <mach/hardware.h> - -#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ -#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ -#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ -#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ -#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ -#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ -#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ -#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ -#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */ -#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ -#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ -#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ -#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ -#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ -#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ -#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ -#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ -#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ -#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ - -#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) -#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) -#define IIM_PROD_REV_SH 3 -#define IIM_PROD_REV_LEN 5 - -#ifdef CONFIG_MXC_IRQ_PRIOR -void imx_irq_set_priority(unsigned char irq, unsigned char prio) -{ - unsigned int temp; - unsigned int mask = 0x0F << irq % 8 * 4; - - if (irq > 63) - return; - - temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); - temp &= ~mask; - temp |= prio & mask; - - __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); -} -EXPORT_SYMBOL(imx_irq_set_priority); -#endif - -#ifdef CONFIG_FIQ -int mxc_set_irq_fiq(unsigned int irq, unsigned int type) -{ - unsigned int irqt; - - if (irq >= MXC_INTERNAL_IRQS) - return -EINVAL; - - if (irq < MXC_INTERNAL_IRQS / 2) { - irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL); - } else { - irq -= MXC_INTERNAL_IRQS / 2; - irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH); - } - - return 0; -} -EXPORT_SYMBOL(mxc_set_irq_fiq); -#endif /* CONFIG_FIQ */ - -/* Disable interrupt number "irq" in the AVIC */ -static void mxc_mask_irq(unsigned int irq) -{ - __raw_writel(irq, AVIC_INTDISNUM); -} - -/* Enable interrupt number "irq" in the AVIC */ -static void mxc_unmask_irq(unsigned int irq) -{ - __raw_writel(irq, AVIC_INTENNUM); -} - -static struct irq_chip mxc_avic_chip = { - .ack = mxc_mask_irq, - .mask = mxc_mask_irq, - .unmask = mxc_unmask_irq, -}; - -/* - * This function initializes the AVIC hardware and disables all the - * interrupts. It registers the interrupt enable and disable functions - * to the kernel for each interrupt source. - */ -void __init mxc_init_irq(void) -{ - int i; - - /* put the AVIC into the reset value with - * all interrupts disabled - */ - __raw_writel(0, AVIC_INTCNTL); - __raw_writel(0x1f, AVIC_NIMASK); - - /* disable all interrupts */ - __raw_writel(0, AVIC_INTENABLEH); - __raw_writel(0, AVIC_INTENABLEL); - - /* all IRQ no FIQ */ - __raw_writel(0, AVIC_INTTYPEH); - __raw_writel(0, AVIC_INTTYPEL); - for (i = 0; i < MXC_INTERNAL_IRQS; i++) { - set_irq_chip(i, &mxc_avic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - - /* Set default priority value (0) for all IRQ's */ - for (i = 0; i < 8; i++) - __raw_writel(0, AVIC_NIPRIORITY(i)); - - /* init architectures chained interrupt handler */ - mxc_register_gpios(); - -#ifdef CONFIG_FIQ - /* Initialize FIQ */ - init_FIQ(); -#endif - - printk(KERN_INFO "MXC IRQ initialized\n"); -} diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c deleted file mode 100644 index 758a1293bcf..00000000000 --- a/arch/arm/plat-mxc/time.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clockchips.h> -#include <linux/clk.h> - -#include <mach/hardware.h> -#include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mxc_timer.h> - -static struct clock_event_device clockevent_mxc; -static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -/* clock source for the timer */ -static struct clk *timer_clk; - -/* clock source */ - -static cycle_t mxc_get_cycles(void) -{ - return __raw_readl(TIMER_BASE + MXC_TCN); -} - -static struct clocksource clocksource_mxc = { - .name = "mxc_timer1", - .rating = 200, - .read = mxc_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init mxc_clocksource_init(void) -{ - unsigned int clock; - - clock = clk_get_rate(timer_clk); - - clocksource_mxc.mult = clocksource_hz2mult(clock, - clocksource_mxc.shift); - clocksource_register(&clocksource_mxc); - - return 0; -} - -/* clock event */ - -static int mxc_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long tcmp; - - tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt; - __raw_writel(tcmp, TIMER_BASE + MXC_TCMP); - - return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ? - -ETIME : 0; -} - -#ifdef DEBUG -static const char *clock_event_mode_label[] = { - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /* DEBUG */ - -static void mxc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long flags; - - /* - * The timer interrupt generation is disabled at least - * for enough time to call mxc_set_next_event() - */ - local_irq_save(flags); - - /* Disable interrupt in GPT module */ - gpt_irq_disable(); - - if (mode != clockevent_mode) { - /* Set event time into far-far future */ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3, - TIMER_BASE + MXC_TCMP); - /* Clear pending interrupt */ - gpt_irq_acknowledge(); - } - -#ifdef DEBUG - printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n", - clock_event_mode_label[clockevent_mode], - clock_event_mode_label[mode]); -#endif /* DEBUG */ - - /* Remember timer mode */ - clockevent_mode = mode; - local_irq_restore(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_ERR"mxc_set_mode: Periodic mode is not " - "supported for i.MX\n"); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* - * Do not put overhead of interrupt enable/disable into - * mxc_set_next_event(), the core has about 4 minutes - * to call mxc_set_next_event() or shutdown clock after - * mode switching - */ - local_irq_save(flags); - gpt_irq_enable(); - local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_mxc; - uint32_t tstat; - - tstat = __raw_readl(TIMER_BASE + MXC_TSTAT); - - gpt_irq_acknowledge(); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction mxc_timer_irq = { - .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = mxc_timer_interrupt, -}; - -static struct clock_event_device clockevent_mxc = { - .name = "mxc_timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_mode = mxc_set_mode, - .set_next_event = mxc_set_next_event, - .rating = 200, -}; - -static int __init mxc_clockevent_init(void) -{ - unsigned int clock; - - clock = clk_get_rate(timer_clk); - - clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC, - clockevent_mxc.shift); - clockevent_mxc.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_mxc); - clockevent_mxc.min_delta_ns = - clockevent_delta2ns(0xff, &clockevent_mxc); - - clockevent_mxc.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_mxc); - - return 0; -} - -void __init mxc_timer_init(const char *clk_timer) -{ - timer_clk = clk_get(NULL, clk_timer); - if (!timer_clk) { - printk(KERN_ERR"Cannot determine timer clock. Giving up.\n"); - return; - } - - clk_enable(timer_clk); - - /* - * Initialise to a known state (all timers off, and timing reset) - */ - __raw_writel(0, TIMER_BASE + MXC_TCTL); - __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */ - - __raw_writel(TCTL_FRR | /* free running */ - TCTL_VAL | /* set clocksource and arch specific bits */ - TCTL_TEN, /* start the timer */ - TIMER_BASE + MXC_TCTL); - - /* init and register the timer to the framework */ - mxc_clocksource_init(); - mxc_clockevent_init(); - - /* Make irqs happen */ - setup_irq(TIMER_INTERRUPT, &mxc_timer_irq); -} - |