aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/gpio.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-mxc/gpio.c')
-rw-r--r--arch/arm/plat-mxc/gpio.c300
1 files changed, 0 insertions, 300 deletions
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
deleted file mode 100644
index 7506d963be4..00000000000
--- a/arch/arm/plat-mxc/gpio.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <asm-generic/bug.h>
-
-static struct mxc_gpio_port *mxc_gpio_ports;
-static int gpio_table_size;
-
-/* Note: This driver assumes 32 GPIOs are handled in one register */
-
-static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
-{
- __raw_writel(1 << index, port->base + GPIO_ISR);
-}
-
-static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
- int enable)
-{
- u32 l;
-
- l = __raw_readl(port->base + GPIO_IMR);
- l = (l & (~(1 << index))) | (!!enable << index);
- __raw_writel(l, port->base + GPIO_IMR);
-}
-
-static void gpio_ack_irq(u32 irq)
-{
- u32 gpio = irq_to_gpio(irq);
- _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
-}
-
-static void gpio_mask_irq(u32 irq)
-{
- u32 gpio = irq_to_gpio(irq);
- _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
-}
-
-static void gpio_unmask_irq(u32 irq)
-{
- u32 gpio = irq_to_gpio(irq);
- _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
-}
-
-static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
-
-static int gpio_set_irq_type(u32 irq, u32 type)
-{
- u32 gpio = irq_to_gpio(irq);
- struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
- u32 bit, val;
- int edge;
- void __iomem *reg = port->base;
-
- port->both_edges &= ~(1 << (gpio & 31));
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- edge = GPIO_INT_RISE_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- edge = GPIO_INT_FALL_EDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- val = mxc_gpio_get(&port->chip, gpio & 31);
- if (val) {
- edge = GPIO_INT_LOW_LEV;
- pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
- } else {
- edge = GPIO_INT_HIGH_LEV;
- pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
- }
- port->both_edges |= 1 << (gpio & 31);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- edge = GPIO_INT_LOW_LEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- edge = GPIO_INT_HIGH_LEV;
- break;
- default:
- return -EINVAL;
- }
-
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
- val = __raw_readl(reg) & ~(0x3 << (bit << 1));
- __raw_writel(val | (edge << (bit << 1)), reg);
- _clear_gpio_irqstatus(port, gpio & 0x1f);
-
- return 0;
-}
-
-static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
-{
- void __iomem *reg = port->base;
- u32 bit, val;
- int edge;
-
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
- val = __raw_readl(reg);
- edge = (val >> (bit << 1)) & 3;
- val &= ~(0x3 << (bit << 1));
- switch (edge) {
- case GPIO_INT_HIGH_LEV:
- edge = GPIO_INT_LOW_LEV;
- pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
- break;
- case GPIO_INT_LOW_LEV:
- edge = GPIO_INT_HIGH_LEV;
- pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
- break;
- default:
- pr_err("mxc: invalid configuration for GPIO %d: %x\n",
- gpio, edge);
- return;
- }
- __raw_writel(val | (edge << (bit << 1)), reg);
-}
-
-/* handle n interrupts in one status register */
-static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
-{
- u32 gpio_irq_no;
-
- gpio_irq_no = port->virtual_irq_start;
- for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
- u32 gpio = irq_to_gpio(gpio_irq_no);
-
- if ((irq_stat & 1) == 0)
- continue;
-
- BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
-
- if (port->both_edges & (1 << (gpio & 31)))
- mxc_flip_edge(port, gpio);
-
- irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
- &irq_desc[gpio_irq_no]);
- }
-}
-
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
-/* MX1 and MX3 has one interrupt *per* gpio port */
-static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
- u32 irq_stat;
- struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
-
- irq_stat = __raw_readl(port->base + GPIO_ISR) &
- __raw_readl(port->base + GPIO_IMR);
-
- mxc_gpio_irq_handler(port, irq_stat);
-}
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-/* MX2 has one interrupt *for all* gpio ports */
-static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
- int i;
- u32 irq_msk, irq_stat;
- struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
-
- /* walk through all interrupt status registers */
- for (i = 0; i < gpio_table_size; i++) {
- irq_msk = __raw_readl(port[i].base + GPIO_IMR);
- if (!irq_msk)
- continue;
-
- irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
- if (irq_stat)
- mxc_gpio_irq_handler(&port[i], irq_stat);
- }
-}
-#endif
-
-static struct irq_chip gpio_irq_chip = {
- .ack = gpio_ack_irq,
- .mask = gpio_mask_irq,
- .unmask = gpio_unmask_irq,
- .set_type = gpio_set_irq_type,
-};
-
-static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
- int dir)
-{
- struct mxc_gpio_port *port =
- container_of(chip, struct mxc_gpio_port, chip);
- u32 l;
-
- l = __raw_readl(port->base + GPIO_GDIR);
- if (dir)
- l |= 1 << offset;
- else
- l &= ~(1 << offset);
- __raw_writel(l, port->base + GPIO_GDIR);
-}
-
-static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct mxc_gpio_port *port =
- container_of(chip, struct mxc_gpio_port, chip);
- void __iomem *reg = port->base + GPIO_DR;
- u32 l;
-
- l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
- __raw_writel(l, reg);
-}
-
-static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct mxc_gpio_port *port =
- container_of(chip, struct mxc_gpio_port, chip);
-
- return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
-}
-
-static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- _set_gpio_direction(chip, offset, 0);
- return 0;
-}
-
-static int mxc_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- mxc_gpio_set(chip, offset, value);
- _set_gpio_direction(chip, offset, 1);
- return 0;
-}
-
-int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
-{
- int i, j;
-
- /* save for local usage */
- mxc_gpio_ports = port;
- gpio_table_size = cnt;
-
- printk(KERN_INFO "MXC GPIO hardware\n");
-
- for (i = 0; i < cnt; i++) {
- /* disable the interrupt and clear the status */
- __raw_writel(0, port[i].base + GPIO_IMR);
- __raw_writel(~0, port[i].base + GPIO_ISR);
- for (j = port[i].virtual_irq_start;
- j < port[i].virtual_irq_start + 32; j++) {
- set_irq_chip(j, &gpio_irq_chip);
- set_irq_handler(j, handle_edge_irq);
- set_irq_flags(j, IRQF_VALID);
- }
-
- /* register gpio chip */
- port[i].chip.direction_input = mxc_gpio_direction_input;
- port[i].chip.direction_output = mxc_gpio_direction_output;
- port[i].chip.get = mxc_gpio_get;
- port[i].chip.set = mxc_gpio_set;
- port[i].chip.base = i * 32;
- port[i].chip.ngpio = 32;
-
- /* its a serious configuration bug when it fails */
- BUG_ON( gpiochip_add(&port[i].chip) < 0 );
-
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
- /* setup one handler for each entry */
- set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
- set_irq_data(port[i].irq, &port[i]);
-#endif
- }
-
-#ifdef CONFIG_ARCH_MX2
- /* setup one handler for all GPIO interrupts */
- set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
- set_irq_data(port[0].irq, port);
-#endif
- return 0;
-}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-05 23:25:09 +0000