diff options
Diffstat (limited to 'arch/arm/mm/proc-xsc3.S')
| -rw-r--r-- | arch/arm/mm/proc-xsc3.S | 192 |
1 files changed, 108 insertions, 84 deletions
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 33515c214b9..dc164589004 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -28,7 +28,6 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/hwcap.h> -#include <mach/hardware.h> #include <asm/pgtable.h> #include <asm/pgtable-hwdef.h> #include <asm/page.h> @@ -90,15 +89,11 @@ ENTRY(cpu_xsc3_proc_init) * cpu_xsc3_proc_fin() */ ENTRY(cpu_xsc3_proc_fin) - str lr, [sp, #-4]! - mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r0 - bl xsc3_flush_kern_cache_all @ clean caches mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldr pc, [sp], #4 + mov pc, lr /* * cpu_xsc3_reset(loc) @@ -110,6 +105,7 @@ ENTRY(cpu_xsc3_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_xsc3_reset) mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE msr cpsr_c, r1 @ reset CPSR @@ -124,6 +120,8 @@ ENTRY(cpu_xsc3_reset) @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs mov pc, r0 +ENDPROC(cpu_xsc3_reset) + .popsection /* * cpu_xsc3_do_idle() @@ -145,6 +143,17 @@ ENTRY(cpu_xsc3_do_idle) /* ================================= CACHE ================================ */ /* + * flush_icache_all() + * + * Unconditionally clean and invalidate the entire icache. + */ +ENTRY(xsc3_flush_icache_all) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mov pc, lr +ENDPROC(xsc3_flush_icache_all) + +/* * flush_user_cache_all() * * Invalidate all cache entries in a particular address @@ -226,15 +235,16 @@ ENTRY(xsc3_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache. * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(xsc3_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(xsc3_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE cmp r0, r1 @@ -256,7 +266,7 @@ ENTRY(xsc3_flush_kern_dcache_page) * - start - virtual start address * - end - virtual end address */ -ENTRY(xsc3_dma_inv_range) +xsc3_dma_inv_range: tst r0, #CACHELINESIZE - 1 bic r0, r0, #CACHELINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line @@ -277,7 +287,7 @@ ENTRY(xsc3_dma_inv_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(xsc3_dma_clean_range) +xsc3_dma_clean_range: bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line add r0, r0, #CACHELINESIZE @@ -303,16 +313,35 @@ ENTRY(xsc3_dma_flush_range) mcr p15, 0, r0, c7, c10, 4 @ data write barrier mov pc, lr -ENTRY(xsc3_cache_fns) - .long xsc3_flush_kern_cache_all - .long xsc3_flush_user_cache_all - .long xsc3_flush_user_cache_range - .long xsc3_coherent_kern_range - .long xsc3_coherent_user_range - .long xsc3_flush_kern_dcache_page - .long xsc3_dma_inv_range - .long xsc3_dma_clean_range - .long xsc3_dma_flush_range +/* + * dma_map_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(xsc3_dma_map_area) + add r1, r1, r0 + cmp r2, #DMA_TO_DEVICE + beq xsc3_dma_clean_range + bcs xsc3_dma_inv_range + b xsc3_dma_flush_range +ENDPROC(xsc3_dma_map_area) + +/* + * dma_unmap_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(xsc3_dma_unmap_area) + mov pc, lr +ENDPROC(xsc3_dma_unmap_area) + + .globl xsc3_flush_kern_cache_louis + .equ xsc3_flush_kern_cache_louis, xsc3_flush_kern_cache_all + + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions xsc3 ENTRY(cpu_xsc3_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line @@ -380,10 +409,42 @@ ENTRY(cpu_xsc3_set_pte_ext) mov pc, lr .ltorg - .align - __INIT +.globl cpu_xsc3_suspend_size +.equ cpu_xsc3_suspend_size, 4 * 6 +#ifdef CONFIG_ARM_CPU_SUSPEND +ENTRY(cpu_xsc3_do_suspend) + stmfd sp!, {r4 - r9, lr} + mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode + mrc p15, 0, r5, c15, c1, 0 @ CP access reg + mrc p15, 0, r6, c13, c0, 0 @ PID + mrc p15, 0, r7, c3, c0, 0 @ domain ID + mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mrc p15, 0, r9, c1, c0, 0 @ control reg + bic r4, r4, #2 @ clear frequency change bit + stmia r0, {r4 - r9} @ store cp regs + ldmia sp!, {r4 - r9, pc} +ENDPROC(cpu_xsc3_do_suspend) + +ENTRY(cpu_xsc3_do_resume) + ldmia r0, {r4 - r9} @ load cp regs + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB + mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer + mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode. + mcr p15, 0, r5, c15, c1, 0 @ CP access reg + mcr p15, 0, r6, c13, c0, 0 @ PID + mcr p15, 0, r7, c3, c0, 0 @ domain ID + orr r1, r1, #0x18 @ cache the page table in L2 + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mov r0, r9 @ control register + b cpu_resume_mmu +ENDPROC(cpu_xsc3_do_resume) +#endif .type __xsc3_setup, #function __xsc3_setup: @@ -396,7 +457,7 @@ __xsc3_setup: orr r4, r4, #0x18 @ cache the page table in L2 mcr p15, 0, r4, c2, c0, 0 @ load page table pointer - mov r0, #0 @ don't allow CP access + mov r0, #1 << 6 @ cp6 access for early sched_clock mcr p15, 0, r0, c15, c1, 0 @ write CP access register mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg @@ -406,6 +467,13 @@ __xsc3_setup: adr r5, xsc3_crval ldmia r5, {r5, r6} + +#ifdef CONFIG_CACHE_XSC3L2 + mrc p15, 1, r0, c0, c0, 1 @ get L2 present information + ands r0, r0, #0xf8 + orrne r6, r6, #(1 << 26) @ enable L2 if present +#endif + mrc p15, 0, r0, c1, c0, 0 @ get control register bic r0, r0, r5 @ ..V. ..R. .... ..A. orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) @@ -420,49 +488,24 @@ xsc3_crval: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - - .type xsc3_processor_functions, #object -ENTRY(xsc3_processor_functions) - .word v5t_early_abort - .word pabort_noifar - .word cpu_xsc3_proc_init - .word cpu_xsc3_proc_fin - .word cpu_xsc3_reset - .word cpu_xsc3_do_idle - .word cpu_xsc3_dcache_clean_area - .word cpu_xsc3_switch_mm - .word cpu_xsc3_set_pte_ext - .size xsc3_processor_functions, . - xsc3_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions xsc3, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_xsc3_name, #object -cpu_xsc3_name: - .asciz "XScale-V3 based processor" - .size cpu_xsc3_name, . - cpu_xsc3_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + string cpu_xsc3_name, "XScale-V3 based processor" .align .section ".proc.info.init", #alloc, #execinstr - .type __xsc3_proc_info,#object -__xsc3_proc_info: - .long 0x69056000 - .long 0xffffe000 +.macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ @@ -480,29 +523,10 @@ __xsc3_proc_info: .long v4wbi_tlb_fns .long xsc3_mc_user_fns .long xsc3_cache_fns - .size __xsc3_proc_info, . - __xsc3_proc_info + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm -/* Note: PXA935 changed its implementor ID from Intel to Marvell */ + xsc3_proc_info xsc3, 0x69056000, 0xffffe000 - .type __xsc3_pxa935_proc_info,#object -__xsc3_pxa935_proc_info: - .long 0x56056000 - .long 0xffffe000 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xsc3_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_xsc3_name - .long xsc3_processor_functions - .long v4wbi_tlb_fns - .long xsc3_mc_user_fns - .long xsc3_cache_fns - .size __xsc3_pxa935_proc_info, . - __xsc3_pxa935_proc_info +/* Note: PXA935 changed its implementor ID from Intel to Marvell */ + xsc3_proc_info xsc3_pxa935, 0x56056000, 0xffffe000 |