diff options
Diffstat (limited to 'arch/arm/mm/proc-arm1020e.S')
| -rw-r--r-- | arch/arm/mm/proc-arm1020e.S | 198 |
1 files changed, 88 insertions, 110 deletions
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index d69389c4d4b..9d89405c3d0 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -3,6 +3,7 @@ * * Copyright (C) 2000 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd. + * hacked for non-paged-MM by Hyok S. Choi, 2003. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,14 +26,15 @@ * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt */ #include <linux/linkage.h> -#include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> +#include <asm/hwcap.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> -#include <asm/hardware.h> + +#include "proc-macros.S" /* * This is the maximum size of an area which will be invalidated @@ -62,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 @@ -77,15 +79,11 @@ ENTRY(cpu_arm1020e_proc_init) * cpu_arm1020e_proc_fin() */ ENTRY(cpu_arm1020e_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1020e_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1020e_reset(loc) @@ -97,16 +95,21 @@ ENTRY(cpu_arm1020e_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm1020e_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB +#ifdef CONFIG_MMU mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs +#endif mrc p15, 0, ip, c1, c0, 0 @ ctrl register bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm1020e_reset) + .popsection /* * cpu_arm1020e_do_idle() @@ -119,6 +122,20 @@ ENTRY(cpu_arm1020e_do_idle) /* ================================= CACHE ================================ */ .align 5 + +/* + * flush_icache_all() + * + * Unconditionally clean and invalidate the entire icache. + */ +ENTRY(arm1020e_flush_icache_all) +#ifndef CONFIG_CPU_ICACHE_DISABLE + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache +#endif + mov pc, lr +ENDPROC(arm1020e_flush_icache_all) + /* * flush_user_cache_all() * @@ -218,20 +235,22 @@ ENTRY(arm1020e_coherent_user_range) cmp r0, r1 blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov r0, #0 mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1020e_flush_kern_dcache_page) +ENTRY(arm1020e_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -253,7 +272,7 @@ ENTRY(arm1020e_flush_kern_dcache_page) * * (same as v4wb) */ -ENTRY(arm1020e_dma_inv_range) +arm1020e_dma_inv_range: mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE tst r0, #CACHE_DLINESIZE - 1 @@ -279,7 +298,7 @@ ENTRY(arm1020e_dma_inv_range) * * (same as v4wb) */ -ENTRY(arm1020e_dma_clean_range) +arm1020e_dma_clean_range: mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE bic r0, r0, #CACHE_DLINESIZE - 1 @@ -311,16 +330,35 @@ ENTRY(arm1020e_dma_flush_range) mcr p15, 0, ip, c7, c10, 4 @ drain WB mov pc, lr -ENTRY(arm1020e_cache_fns) - .long arm1020e_flush_kern_cache_all - .long arm1020e_flush_user_cache_all - .long arm1020e_flush_user_cache_range - .long arm1020e_coherent_kern_range - .long arm1020e_coherent_user_range - .long arm1020e_flush_kern_dcache_page - .long arm1020e_dma_inv_range - .long arm1020e_dma_clean_range - .long arm1020e_dma_flush_range +/* + * dma_map_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(arm1020e_dma_map_area) + add r1, r1, r0 + cmp r2, #DMA_TO_DEVICE + beq arm1020e_dma_clean_range + bcs arm1020e_dma_inv_range + b arm1020e_dma_flush_range +ENDPROC(arm1020e_dma_map_area) + +/* + * dma_unmap_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(arm1020e_dma_unmap_area) + mov pc, lr +ENDPROC(arm1020e_dma_unmap_area) + + .globl arm1020e_flush_kern_cache_louis + .equ arm1020e_flush_kern_cache_louis, arm1020e_flush_kern_cache_all + + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm1020e .align 5 ENTRY(cpu_arm1020e_dcache_clean_area) @@ -344,6 +382,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area) */ .align 5 ENTRY(cpu_arm1020e_switch_mm) +#ifdef CONFIG_MMU #ifndef CONFIG_CPU_DCACHE_DISABLE mcr p15, 0, r3, c7, c10, 4 mov r1, #0xF @ 16 segments @@ -367,6 +406,7 @@ ENTRY(cpu_arm1020e_switch_mm) mcr p15, 0, r1, c7, c10, 4 @ drain WB mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs +#endif mov pc, lr /* @@ -375,49 +415,29 @@ ENTRY(cpu_arm1020e_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1020e_set_pte) - str r1, [r0], #-2048 @ linux version - - eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY - - bic r2, r1, #PTE_SMALL_AP_MASK - bic r2, r2, #PTE_TYPE_MASK - orr r2, r2, #PTE_TYPE_SMALL - - tst r1, #L_PTE_USER @ User? - orrne r2, r2, #PTE_SMALL_AP_URO_SRW - - tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? - orreq r2, r2, #PTE_SMALL_AP_UNO_SRW - - tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? - movne r2, #0 - -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - eor r3, r1, #0x0a @ C & small page? - tst r3, #0x0b - biceq r2, r2, #4 -#endif - str r2, [r0] @ hardware version +ENTRY(cpu_arm1020e_set_pte_ext) +#ifdef CONFIG_MMU + armv3_set_pte_ext mov r0, r0 #ifndef CONFIG_CPU_DCACHE_DISABLE mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif +#endif /* CONFIG_MMU */ mov pc, lr - __INIT - .type __arm1020e_setup, #function __arm1020e_setup: mov r0, #0 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 +#ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 +#endif + adr r5, arm1020e_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm1020e_cr1_clear bic r0, r0, r5 - ldr r5, arm1020e_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif @@ -429,69 +449,23 @@ __arm1020e_setup: * .RVI ZFRS BLDP WCAM * .011 1001 ..11 0101 */ - .type arm1020e_cr1_clear, #object - .type arm1020e_cr1_set, #object -arm1020e_cr1_clear: - .word 0x5f3f -arm1020e_cr1_set: - .word 0x3935 + .type arm1020e_crval, #object +arm1020e_crval: + crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm1020e_processor_functions, #object -arm1020e_processor_functions: - .word v4t_early_abort - .word cpu_arm1020e_proc_init - .word cpu_arm1020e_proc_fin - .word cpu_arm1020e_reset - .word cpu_arm1020e_do_idle - .word cpu_arm1020e_dcache_clean_area - .word cpu_arm1020e_switch_mm - .word cpu_arm1020e_set_pte - .size arm1020e_processor_functions, . - arm1020e_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm1020e, dabort=v4t_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm1020e_name, #object -cpu_arm1020e_name: - .ascii "ARM1020E" -#ifndef CONFIG_CPU_ICACHE_DISABLE - .ascii "i" -#endif -#ifndef CONFIG_CPU_DCACHE_DISABLE - .ascii "d" -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - .ascii "(wt)" -#else - .ascii "(wb)" -#endif -#endif -#ifndef CONFIG_CPU_BPREDICT_DISABLE - .ascii "B" -#endif -#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN - .ascii "RR" -#endif - .ascii "\0" - .size cpu_arm1020e_name, . - cpu_arm1020e_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + string cpu_arm1020e_name, "ARM1020E" .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1020e_proc_info,#object __arm1020e_proc_info: @@ -501,6 +475,10 @@ __arm1020e_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ b __arm1020e_setup .long cpu_arch_name .long cpu_elf_name |