diff options
Diffstat (limited to 'arch/arm/mach-w90x900')
33 files changed, 608 insertions, 353 deletions
diff --git a/arch/arm/mach-w90x900/Makefile.boot b/arch/arm/mach-w90x900/Makefile.boot index a057b546b6e..6c3d421c2d1 100644 --- a/arch/arm/mach-w90x900/Makefile.boot +++ b/arch/arm/mach-w90x900/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c index 3de4a5211c3..06d867dce55 100644 --- a/arch/arm/mach-w90x900/clksel.c +++ b/arch/arm/mach-w90x900/clksel.c @@ -48,7 +48,7 @@ static void clock_source_select(const char *dev_id, unsigned int clkval) offset = ATAOFFSET; else if (strcmp(dev_id, "nuc900-lcd") == 0) offset = LCDOFFSET; - else if (strcmp(dev_id, "nuc900-audio") == 0) + else if (strcmp(dev_id, "nuc900-ac97") == 0) offset = AUDOFFSET; else offset = CPUOFFSET; diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c index b785994bab0..2c371ff22e5 100644 --- a/arch/arm/mach-w90x900/clock.c +++ b/arch/arm/mach-w90x900/clock.c @@ -90,12 +90,3 @@ void nuc900_subclk_enable(struct clk *clk, int enable) __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK); } - - -void clks_register(struct clk_lookup *clks, size_t num) -{ - int i; - - for (i = 0; i < num; i++) - clkdev_add(&clks[i]); -} diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h index f5816a06eed..b88a1b16b2e 100644 --- a/arch/arm/mach-w90x900/clock.h +++ b/arch/arm/mach-w90x900/clock.h @@ -10,11 +10,10 @@ * the Free Software Foundation; either version 2 of the License. */ -#include <asm/clkdev.h> +#include <linux/clkdev.h> void nuc900_clk_enable(struct clk *clk, int enable); void nuc900_subclk_enable(struct clk *clk, int enable); -void clks_register(struct clk_lookup *clks, size_t num); struct clk { unsigned long cken; diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 20dc0c96214..b1eabaad50a 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -28,14 +28,17 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #include <mach/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-ebi.h> +#include <mach/regs-timer.h> #include "cpu.h" #include "clock.h" +#include "nuc9xx.h" /* Initial IO mappings */ @@ -45,6 +48,7 @@ static struct map_desc nuc900_iodesc[] __initdata = { IODESC_ENT(UART), IODESC_ENT(TIMER), IODESC_ENT(EBI), + IODESC_ENT(GPIO), }; /* Initial clock declarations. */ @@ -59,7 +63,7 @@ static DEFINE_CLK(emc, 7); static DEFINE_SUBCLK(rmii, 2); static DEFINE_CLK(usbd, 8); static DEFINE_CLK(usbh, 9); -static DEFINE_CLK(g2d, 10);; +static DEFINE_CLK(g2d, 10); static DEFINE_CLK(pwm, 18); static DEFINE_CLK(ps2, 24); static DEFINE_CLK(kpi, 25); @@ -68,10 +72,15 @@ static DEFINE_CLK(gdma, 27); static DEFINE_CLK(adc, 28); static DEFINE_CLK(usi, 29); static DEFINE_CLK(ext, 0); +static DEFINE_CLK(timer0, 19); +static DEFINE_CLK(timer1, 20); +static DEFINE_CLK(timer2, 21); +static DEFINE_CLK(timer3, 22); +static DEFINE_CLK(timer4, 23); static struct clk_lookup nuc900_clkregs[] = { DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL), - DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL), + DEF_CLKLOOK(&clk_audio, "nuc900-ac97", NULL), DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL), DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"), DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"), @@ -87,9 +96,14 @@ static struct clk_lookup nuc900_clkregs[] = { DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL), DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL), DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL), - DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL), + DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL), DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL), DEF_CLKLOOK(&clk_ext, NULL, "ext"), + DEF_CLKLOOK(&clk_timer0, NULL, "timer0"), + DEF_CLKLOOK(&clk_timer1, NULL, "timer1"), + DEF_CLKLOOK(&clk_timer2, NULL, "timer2"), + DEF_CLKLOOK(&clk_timer3, NULL, "timer3"), + DEF_CLKLOOK(&clk_timer4, NULL, "timer4"), }; /* Initial serial platform data */ @@ -208,6 +222,20 @@ void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size) void __init nuc900_init_clocks(void) { - clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs)); + clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs)); } +#define WTCR (TMR_BA + 0x1C) +#define WTCLK (1 << 10) +#define WTE (1 << 7) +#define WTRE (1 << 1) + +void nuc9xx_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode == REBOOT_SOFT) { + /* Jump into ROM at address 0 */ + soft_restart(0); + } else { + __raw_writel(WTE | WTRE | WTCLK, WTCR); + } +} diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h index 4d58ba164e2..f8730b60bd7 100644 --- a/arch/arm/mach-w90x900/cpu.h +++ b/arch/arm/mach-w90x900/cpu.h @@ -57,3 +57,4 @@ extern struct platform_device nuc900_device_fmi; extern struct platform_device nuc900_device_kpi; extern struct platform_device nuc900_device_rtc; extern struct platform_device nuc900_device_ts; +extern struct platform_device nuc900_device_lcd; diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index ec711f4b401..e65a80a1ac7 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -18,6 +18,8 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/cpu.h> #include <linux/mtd/physmap.h> #include <linux/mtd/mtd.h> @@ -26,14 +28,18 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <mach/regs-serial.h> -#include <mach/nuc900_spi.h> +#include <linux/platform_data/spi-nuc900.h> #include <mach/map.h> +#include <linux/platform_data/video-nuc900fb.h> +#include <mach/regs-ldm.h> +#include <linux/platform_data/keypad-w90p910.h> #include "cpu.h" @@ -205,7 +211,7 @@ static struct nuc900_spi_info nuc900_spiflash_data = { .divider = 24, .sleep = 0, .txnum = 0, - .txbitlen = 1, + .txbitlen = 8, .bus_num = 0, }; @@ -254,7 +260,7 @@ static struct spi_board_info nuc900_spi_board_info[] __initdata = { .modalias = "m25p80", .max_speed_hz = 20000000, .bus_num = 0, - .chip_select = 1, + .chip_select = 0, .platform_data = &nuc900_spi_flash_data, .mode = SPI_MODE_0, }, @@ -359,6 +365,39 @@ struct platform_device nuc900_device_fmi = { /* KPI controller*/ +static int nuc900_keymap[] = { + KEY(0, 0, KEY_A), + KEY(0, 1, KEY_B), + KEY(0, 2, KEY_C), + KEY(0, 3, KEY_D), + + KEY(1, 0, KEY_E), + KEY(1, 1, KEY_F), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_H), + + KEY(2, 0, KEY_I), + KEY(2, 1, KEY_J), + KEY(2, 2, KEY_K), + KEY(2, 3, KEY_L), + + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P), +}; + +static struct matrix_keymap_data nuc900_map_data = { + .keymap = nuc900_keymap, + .keymap_size = ARRAY_SIZE(nuc900_keymap), +}; + +struct w90p910_keypad_platform_data nuc900_keypad_info = { + .keymap_data = &nuc900_map_data, + .prescale = 0xfa, + .debounce = 0x50, +}; + static struct resource nuc900_kpi_resource[] = { [0] = { .start = W90X900_PA_KPI, @@ -378,6 +417,101 @@ struct platform_device nuc900_device_kpi = { .id = -1, .num_resources = ARRAY_SIZE(nuc900_kpi_resource), .resource = nuc900_kpi_resource, + .dev = { + .platform_data = &nuc900_keypad_info, + } +}; + +/* LCD controller*/ + +static struct nuc900fb_display nuc900_lcd_info[] = { + /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */ + [0] = { + .type = LCM_DCCS_VA_SRC_RGB565, + .width = 320, + .height = 240, + .xres = 320, + .yres = 240, + .bpp = 16, + .pixclock = 200000, + .left_margin = 34, + .right_margin = 54, + .hsync_len = 10, + .upper_margin = 18, + .lower_margin = 4, + .vsync_len = 1, + .dccs = 0x8e00041a, + .devctl = 0x060800c0, + .fbctrl = 0x00a000a0, + .scale = 0x04000400, + }, +}; + +static struct nuc900fb_mach_info nuc900_fb_info = { +#if defined(CONFIG_GPM1040A0_320X240) + .displays = &nuc900_lcd_info[0], +#else + .displays = nuc900_lcd_info, +#endif + .num_displays = ARRAY_SIZE(nuc900_lcd_info), + .default_display = 0, + .gpio_dir = 0x00000004, + .gpio_dir_mask = 0xFFFFFFFD, + .gpio_data = 0x00000004, + .gpio_data_mask = 0xFFFFFFFD, +}; + +static struct resource nuc900_lcd_resource[] = { + [0] = { + .start = W90X900_PA_LCD, + .end = W90X900_PA_LCD + W90X900_SZ_LCD - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_LCD, + .end = IRQ_LCD, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 nuc900_device_lcd_dmamask = -1; +struct platform_device nuc900_device_lcd = { + .name = "nuc900-lcd", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_lcd_resource), + .resource = nuc900_lcd_resource, + .dev = { + .dma_mask = &nuc900_device_lcd_dmamask, + .coherent_dma_mask = -1, + .platform_data = &nuc900_fb_info, + } +}; + +/* AUDIO controller*/ +static u64 nuc900_device_audio_dmamask = -1; +static struct resource nuc900_ac97_resource[] = { + [0] = { + .start = W90X900_PA_ACTL, + .end = W90X900_PA_ACTL + W90X900_SZ_ACTL - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ACTL, + .end = IRQ_ACTL, + .flags = IORESOURCE_IRQ, + } + +}; + +struct platform_device nuc900_device_ac97 = { + .name = "nuc900-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_ac97_resource), + .resource = nuc900_ac97_resource, + .dev = { + .dma_mask = &nuc900_device_audio_dmamask, + .coherent_dma_mask = -1, + } }; /*Here should be your evb resourse,such as LCD*/ @@ -391,12 +525,14 @@ static struct platform_device *nuc900_public_dev[] __initdata = { &nuc900_device_emc, &nuc900_device_spi, &nuc900_device_wdt, + &nuc900_device_ac97, }; /* Provide adding specific CPU platform devices API */ void __init nuc900_board_init(struct platform_device **device, int size) { + cpu_idle_poll_ctrl(true); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801..00000000000 --- a/arch/arm/mach-w90x900/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S index d39aca5be9e..0ff612ac95b 100644 --- a/arch/arm/mach-w90x900/include/mach/entry-macro.S +++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S @@ -15,20 +15,12 @@ .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \base, #AIC_BA - ldr \irqnr, [ \base, #AIC_IPER] - ldr \irqnr, [ \base, #AIC_ISNR] + ldr \irqnr, [\base, #AIC_IPER] + ldr \irqnr, [\base, #AIC_ISNR] cmp \irqnr, #0 .endm - - /* currently don't need an disable_fiq macro */ - - .macro disable_fiq - .endm diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h deleted file mode 100644 index 034da3e390c..00000000000 --- a/arch/arm/mach-w90x900/include/mach/gpio.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * linux/arch/arm/mach-w90p910/include/mach/gpio.h - * - * Generic w90p910 GPIO handling - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_W90P910_GPIO_H -#define __ASM_ARCH_W90P910_GPIO_H - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} - -#endif diff --git a/arch/arm/mach-w90x900/include/mach/io.h b/arch/arm/mach-w90x900/include/mach/io.h deleted file mode 100644 index d96ab99df05..00000000000 --- a/arch/arm/mach-w90x900/include/mach/io.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/io.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/io.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * 1:1 mapping for ioremapped regions. - */ - -#define __mem_pci(a) (a) -#define __io(a) __typesafe_io(a) - -#endif diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h deleted file mode 100644 index 971b80702c2..00000000000 --- a/arch/arm/mach-w90x900/include/mach/memory.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/memory.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-w90x900/include/mach/mfp.h b/arch/arm/mach-w90x900/include/mach/mfp.h new file mode 100644 index 00000000000..23ef1f573ab --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/mfp.h @@ -0,0 +1,25 @@ +/* + * arch/arm/mach-w90x900/include/mach/mfp.h + * + * Copyright (c) 2010 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * Based on arch/arm/mach-s3c2410/include/mach/map.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __ASM_ARCH_MFP_H +#define __ASM_ARCH_MFP_H + +extern void mfp_set_groupf(struct device *dev); +extern void mfp_set_groupc(struct device *dev); +extern void mfp_set_groupi(struct device *dev); +extern void mfp_set_groupg(struct device *dev, const char *subname); +extern void mfp_set_groupd(struct device *dev, const char *subname); + +#endif /* __ASM_ARCH_MFP_H */ diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h deleted file mode 100644 index bd94819e314..00000000000 --- a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/nuc900_spi.h - * - * Copyright (c) 2009 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#ifndef __ASM_ARCH_SPI_H -#define __ASM_ARCH_SPI_H - -extern void mfp_set_groupg(struct device *dev); - -struct nuc900_spi_info { - unsigned int num_cs; - unsigned int lsb; - unsigned int txneg; - unsigned int rxneg; - unsigned int divider; - unsigned int sleep; - unsigned int txnum; - unsigned int txbitlen; - int bus_num; -}; - -struct nuc900_spi_chip { - unsigned char bits_per_word; -}; - -#endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h new file mode 100644 index 00000000000..6087abd93ef --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-gcr.h + * + * Copyright (c) 2010 Nuvoton technology corporation + * All rights reserved. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_REGS_GCR_H +#define __ASM_ARCH_REGS_GCR_H + +/* Global control registers */ + +#define GCR_BA W90X900_VA_GCR +#define REG_PDID (GCR_BA+0x000) +#define REG_PWRON (GCR_BA+0x004) +#define REG_ARBCON (GCR_BA+0x008) +#define REG_MFSEL (GCR_BA+0x00C) +#define REG_EBIDPE (GCR_BA+0x010) +#define REG_LCDDPE (GCR_BA+0x014) +#define REG_GPIOCPE (GCR_BA+0x018) +#define REG_GPIODPE (GCR_BA+0x01C) +#define REG_GPIOEPE (GCR_BA+0x020) +#define REG_GPIOFPE (GCR_BA+0x024) +#define REG_GPIOGPE (GCR_BA+0x028) +#define REG_GPIOHPE (GCR_BA+0x02C) +#define REG_GPIOIPE (GCR_BA+0x030) +#define REG_GTMP1 (GCR_BA+0x034) +#define REG_GTMP2 (GCR_BA+0x038) +#define REG_GTMP3 (GCR_BA+0x03C) + +#endif /* __ASM_ARCH_REGS_GCR_H */ diff --git a/arch/arm/mach-w90x900/include/mach/regs-ldm.h b/arch/arm/mach-w90x900/include/mach/regs-ldm.h new file mode 100644 index 00000000000..e9d480a5b23 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-ldm.h @@ -0,0 +1,253 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-serial.h + * + * Copyright (c) 2009 Nuvoton technology corporation + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Description: + * Nuvoton Display, LCM Register list + * Author: Wang Qiang (rurality.linux@gmail.com) 2009/12/11 + * + */ + + +#ifndef __ASM_ARM_W90X900_REGS_LDM_H +#define __ASM_ARM_W90X900_REGS_LDM_H + +#include <mach/map.h> + +/* Display Controller Control/Status Register */ +#define REG_LCM_DCCS (0x00) + +#define LCM_DCCS_ENG_RST (1 << 0) +#define LCM_DCCS_VA_EN (1 << 1) +#define LCM_DCCS_OSD_EN (1 << 2) +#define LCM_DCCS_DISP_OUT_EN (1 << 3) +#define LCM_DCCS_DISP_INT_EN (1 << 4) +#define LCM_DCCS_CMD_ON (1 << 5) +#define LCM_DCCS_FIELD_INTR (1 << 6) +#define LCM_DCCS_SINGLE (1 << 7) + +enum LCM_DCCS_VA_SRC { + LCM_DCCS_VA_SRC_YUV422 = (0 << 8), + LCM_DCCS_VA_SRC_YCBCR422 = (1 << 8), + LCM_DCCS_VA_SRC_RGB888 = (2 << 8), + LCM_DCCS_VA_SRC_RGB666 = (3 << 8), + LCM_DCCS_VA_SRC_RGB565 = (4 << 8), + LCM_DCCS_VA_SRC_RGB444LOW = (5 << 8), + LCM_DCCS_VA_SRC_RGB444HIGH = (7 << 8) +}; + + +/* Display Device Control Register */ +#define REG_LCM_DEV_CTRL (0x04) + +enum LCM_DEV_CTRL_SWAP_YCbCr { + LCM_DEV_CTRL_SWAP_UYVY = (0 << 1), + LCM_DEV_CTRL_SWAP_YUYV = (1 << 1), + LCM_DEV_CTRL_SWAP_VYUY = (2 << 1), + LCM_DEV_CTRL_SWAP_YVYU = (3 << 1) +}; + +enum LCM_DEV_CTRL_RGB_SHIFT { + LCM_DEV_CTRL_RGB_SHIFT_NOT = (0 << 3), + LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3), + LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3), + LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF = (3 << 3) +}; + +enum LCM_DEV_CTRL_DEVICE { + LCM_DEV_CTRL_DEVICE_YUV422 = (0 << 5), + LCM_DEV_CTRL_DEVICE_YUV444 = (1 << 5), + LCM_DEV_CTRL_DEVICE_UNIPAC = (4 << 5), + LCM_DEV_CTRL_DEVICE_SEIKO_EPSON = (5 << 5), + LCM_DEV_CTRL_DEVICE_HIGH_COLOR = (6 << 5), + LCM_DEV_CTRL_DEVICE_MPU = (7 << 5) +}; + +#define LCM_DEV_CTRL_LCD_DDA (8) +#define LCM_DEV_CTRL_YUV2CCIR (16) + +enum LCM_DEV_CTRL_LCD_SEL { + LCM_DEV_CTRL_LCD_SEL_RGB_GBR = (0 << 17), + LCM_DEV_CTRL_LCD_SEL_BGR_RBG = (1 << 17), + LCM_DEV_CTRL_LCD_SEL_GBR_RGB = (2 << 17), + LCM_DEV_CTRL_LCD_SEL_RBG_BGR = (3 << 17) +}; + +enum LCM_DEV_CTRL_FAL_D { + LCM_DEV_CTRL_FAL_D_FALLING = (0 << 19), + LCM_DEV_CTRL_FAL_D_RISING = (1 << 19), +}; + +enum LCM_DEV_CTRL_H_POL { + LCM_DEV_CTRL_H_POL_LOW = (0 << 20), + LCM_DEV_CTRL_H_POL_HIGH = (1 << 20), +}; + +enum LCM_DEV_CTRL_V_POL { + LCM_DEV_CTRL_V_POL_LOW = (0 << 21), + LCM_DEV_CTRL_V_POL_HIGH = (1 << 21), +}; + +enum LCM_DEV_CTRL_VR_LACE { + LCM_DEV_CTRL_VR_LACE_NINTERLACE = (0 << 22), + LCM_DEV_CTRL_VR_LACE_INTERLACE = (1 << 22), +}; + +enum LCM_DEV_CTRL_LACE { + LCM_DEV_CTRL_LACE_NINTERLACE = (0 << 23), + LCM_DEV_CTRL_LACE_INTERLACE = (1 << 23), +}; + +enum LCM_DEV_CTRL_RGB_SCALE { + LCM_DEV_CTRL_RGB_SCALE_4096 = (0 << 24), + LCM_DEV_CTRL_RGB_SCALE_65536 = (1 << 24), + LCM_DEV_CTRL_RGB_SCALE_262144 = (2 << 24), + LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24), +}; + +enum LCM_DEV_CTRL_DBWORD { + LCM_DEV_CTRL_DBWORD_HALFWORD = (0 << 26), + LCM_DEV_CTRL_DBWORD_FULLWORD = (1 << 26), +}; + +enum LCM_DEV_CTRL_MPU68 { + LCM_DEV_CTRL_MPU68_80_SERIES = (0 << 27), + LCM_DEV_CTRL_MPU68_68_SERIES = (1 << 27), +}; + +enum LCM_DEV_CTRL_DE_POL { + LCM_DEV_CTRL_DE_POL_HIGH = (0 << 28), + LCM_DEV_CTRL_DE_POL_LOW = (1 << 28), +}; + +#define LCM_DEV_CTRL_CMD16 (29) +#define LCM_DEV_CTRL_CM16t18 (30) +#define LCM_DEV_CTRL_CMD_LOW (31) + +/* MPU-Interface LCD Write Command */ +#define REG_LCM_MPU_CMD (0x08) + +/* Interrupt Control/Status Register */ +#define REG_LCM_INT_CS (0x0c) +#define LCM_INT_CS_DISP_F_EN (1 << 0) +#define LCM_INT_CS_UNDERRUN_EN (1 << 1) +#define LCM_INT_CS_BUS_ERROR_INT (1 << 28) +#define LCM_INT_CS_UNDERRUN_INT (1 << 29) +#define LCM_INT_CS_DISP_F_STATUS (1 << 30) +#define LCM_INT_CS_DISP_F_INT (1 << 31) + +/* CRTC Display Size Control Register */ +#define REG_LCM_CRTC_SIZE (0x10) +#define LCM_CRTC_SIZE_VTTVAL(x) ((x) << 16) +#define LCM_CRTC_SIZE_HTTVAL(x) ((x) << 0) + +/* CRTC Display Enable End */ +#define REG_LCM_CRTC_DEND (0x14) +#define LCM_CRTC_DEND_VDENDVAL(x) ((x) << 16) +#define LCM_CRTC_DEND_HDENDVAL(x) ((x) << 0) + +/* CRTC Internal Horizontal Retrace Control Register */ +#define REG_LCM_CRTC_HR (0x18) +#define LCM_CRTC_HR_EVAL(x) ((x) << 16) +#define LCM_CRTC_HR_SVAL(x) ((x) << 0) + +/* CRTC Horizontal Sync Control Register */ +#define REG_LCM_CRTC_HSYNC (0x1C) +#define LCM_CRTC_HSYNC_SHIFTVAL(x) ((x) << 30) +#define LCM_CRTC_HSYNC_EVAL(x) ((x) << 16) +#define LCM_CRTC_HSYNC_SVAL(x) ((x) << 0) + +/* CRTC Internal Vertical Retrace Control Register */ +#define REG_LCM_CRTC_VR (0x20) +#define LCM_CRTC_VR_EVAL(x) ((x) << 16) +#define LCM_CRTC_VR_SVAL(x) ((x) << 0) + +/* Video Stream Frame Buffer-0 Starting Address */ +#define REG_LCM_VA_BADDR0 (0x24) + +/* Video Stream Frame Buffer-1 Starting Address */ +#define REG_LCM_VA_BADDR1 (0x28) + +/* Video Stream Frame Buffer Control Register */ +#define REG_LCM_VA_FBCTRL (0x2C) +#define LCM_VA_FBCTRL_IO_REGION_HALF (1 << 28) +#define LCM_VA_FBCTRL_FIELD_DUAL (1 << 29) +#define LCM_VA_FBCTRL_START_BUF (1 << 30) +#define LCM_VA_FBCTRL_DB_EN (1 << 31) + +/* Video Stream Scaling Control Register */ +#define REG_LCM_VA_SCALE (0x30) +#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15) +#define LCM_VA_SCALE_XCOPY_DUPLICATION (1 << 15) + +/* Image Stream Active Window Coordinates */ +#define REG_LCM_VA_WIN (0x38) + +/* Image Stream Stuff Pixel */ +#define REG_LCM_VA_STUFF (0x3C) + +/* OSD Window Starting Coordinates */ +#define REG_LCM_OSD_WINS (0x40) + +/* OSD Window Ending Coordinates */ +#define REG_LCM_OSD_WINE (0x44) + +/* OSD Stream Frame Buffer Starting Address */ +#define REG_LCM_OSD_BADDR (0x48) + +/* OSD Stream Frame Buffer Control Register */ +#define REG_LCM_OSD_FBCTRL (0x4c) + +/* OSD Overlay Control Register */ +#define REG_LCM_OSD_OVERLAY (0x50) + +/* OSD Overlay Color-Key Pattern Register */ +#define REG_LCM_OSD_CKEY (0x54) + +/* OSD Overlay Color-Key Mask Register */ +#define REG_LCM_OSD_CMASK (0x58) + +/* OSD Window Skip1 Register */ +#define REG_LCM_OSD_SKIP1 (0x5C) + +/* OSD Window Skip2 Register */ +#define REG_LCM_OSD_SKIP2 (0x60) + +/* OSD horizontal up scaling control register */ +#define REG_LCM_OSD_SCALE (0x64) + +/* MPU Vsync control register */ +#define REG_LCM_MPU_VSYNC (0x68) + +/* Hardware cursor control Register */ +#define REG_LCM_HC_CTRL (0x6C) + +/* Hardware cursot tip point potison on va picture */ +#define REG_LCM_HC_POS (0x70) + +/* Hardware Cursor Window Buffer Control Register */ +#define REG_LCM_HC_WBCTRL (0x74) + +/* Hardware cursor memory base address register */ +#define REG_LCM_HC_BADDR (0x78) + +/* Hardware cursor color ram register mapped to bpp = 0 */ +#define REG_LCM_HC_COLOR0 (0x7C) + +/* Hardware cursor color ram register mapped to bpp = 1 */ +#define REG_LCM_HC_COLOR1 (0x80) + +/* Hardware cursor color ram register mapped to bpp = 2 */ +#define REG_LCM_HC_COLOR2 (0x84) + +/* Hardware cursor color ram register mapped to bpp = 3 */ +#define REG_LCM_HC_COLOR3 (0x88) + +#endif /* __ASM_ARM_W90X900_REGS_LDM_H */ diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h deleted file mode 100644 index ce228bdc66d..00000000000 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/system.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/io.h> -#include <asm/proc-fns.h> -#include <mach/map.h> -#include <mach/regs-timer.h> - -#define WTCR (TMR_BA + 0x1C) -#define WTCLK (1 << 10) -#define WTE (1 << 7) -#define WTRE (1 << 1) - -static void arch_idle(void) -{ -} - -static void arch_reset(char mode, const char *cmd) -{ - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - __raw_writel(WTE | WTRE | WTCLK, WTCR); - } -} - diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h deleted file mode 100644 index 164dce0b64d..00000000000 --- a/arch/arm/mach-w90x900/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/timex.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE Now, I don't use it. */ - -#define CLOCK_TICK_RATE 15000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 56f1a74d701..4b7c324ff66 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -24,10 +24,8 @@ #include <mach/map.h> #include <linux/serial_reg.h> -#define arch_decomp_wdog() - #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) -static volatile u32 * uart_base = (u32 *)UART0_PA; +static volatile u32 * const uart_base = (u32 *)UART0_PA; static void putc(int ch) { diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h deleted file mode 100644 index 2f9dfb92853..00000000000 --- a/arch/arm/mach-w90x900/include/mach/vmalloc.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/vmalloc.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xE0000000) - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h deleted file mode 100644 index 556778e8dda..00000000000 --- a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_ARCH_W90P910_KEYPAD_H -#define __ASM_ARCH_W90P910_KEYPAD_H - -#include <linux/input/matrix_keypad.h> - -extern void mfp_set_groupi(struct device *dev); - -struct w90p910_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - unsigned int prescale; - unsigned int debounce; -}; - -#endif /* __ASM_ARCH_W90P910_KEYPAD_H */ diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c index 0ce9d8e867e..d66d43ae8df 100644 --- a/arch/arm/mach-w90x900/irq.c +++ b/arch/arm/mach-w90x900/irq.c @@ -19,7 +19,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/ptrace.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <asm/irq.h> @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <mach/regs-irq.h> +#include "nuc9xx.h" + struct group_irq { unsigned long gpen; unsigned int enabled; @@ -92,15 +94,15 @@ static void nuc900_group_enable(struct group_irq *gpirq, int enable) __raw_writel(regval, REG_AIC_GEN); } -static void nuc900_irq_mask(unsigned int irq) +static void nuc900_irq_mask(struct irq_data *d) { struct group_irq *group_irq; group_irq = NULL; - __raw_writel(1 << irq, REG_AIC_MDCR); + __raw_writel(1 << d->irq, REG_AIC_MDCR); - switch (irq) { + switch (d->irq) { case IRQ_GROUP0: group_irq = &group_nirq0; break; @@ -143,20 +145,20 @@ static void nuc900_irq_mask(unsigned int irq) * to REG_AIC_EOSCR for ACK */ -static void nuc900_irq_ack(unsigned int irq) +static void nuc900_irq_ack(struct irq_data *d) { __raw_writel(0x01, REG_AIC_EOSCR); } -static void nuc900_irq_unmask(unsigned int irq) +static void nuc900_irq_unmask(struct irq_data *d) { struct group_irq *group_irq; group_irq = NULL; - __raw_writel(1 << irq, REG_AIC_MECR); + __raw_writel(1 << d->irq, REG_AIC_MECR); - switch (irq) { + switch (d->irq) { case IRQ_GROUP0: group_irq = &group_nirq0; break; @@ -195,9 +197,9 @@ static void nuc900_irq_unmask(unsigned int irq) } static struct irq_chip nuc900_irq_chip = { - .ack = nuc900_irq_ack, - .mask = nuc900_irq_mask, - .unmask = nuc900_irq_unmask, + .irq_ack = nuc900_irq_ack, + .irq_mask = nuc900_irq_mask, + .irq_unmask = nuc900_irq_unmask, }; void __init nuc900_init_irq(void) @@ -207,8 +209,8 @@ void __init nuc900_init_irq(void) __raw_writel(0xFFFFFFFE, REG_AIC_MDCR); for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) { - set_irq_chip(irqno, &nuc900_irq_chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &nuc900_irq_chip, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } } diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c index ec05bda946f..92f1c978f35 100644 --- a/arch/arm/mach-w90x900/mach-nuc910evb.c +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -34,11 +34,9 @@ static void __init nuc910evb_init(void) MACHINE_START(W90P910EVB, "W90P910EVB") /* Maintainer: Wan ZongShun */ - .phys_io = W90X900_PA_UART, - .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, - .boot_params = 0, .map_io = nuc910evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc910evb_init, - .timer = &nuc900_timer, + .init_time = nuc900_timer_init, + .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index cef903bcccd..26f7189056e 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -10,6 +10,8 @@ * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation;version 2 of the License. + * history: + * Wang Qiang (rurality.linux@gmail.com) add LCD support * */ @@ -18,6 +20,7 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> #include <mach/map.h> +#include <linux/platform_data/video-nuc900fb.h> #include "nuc950.h" @@ -34,11 +37,9 @@ static void __init nuc950evb_init(void) MACHINE_START(W90P950EVB, "W90P950EVB") /* Maintainer: Wan ZongShun */ - .phys_io = W90X900_PA_UART, - .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, - .boot_params = 0, .map_io = nuc950evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc950evb_init, - .timer = &nuc900_timer, + .init_time = nuc900_timer_init, + .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c index e3a46f19f2b..9b4e73fe10e 100644 --- a/arch/arm/mach-w90x900/mach-nuc960evb.c +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -34,11 +34,9 @@ static void __init nuc960evb_init(void) MACHINE_START(W90N960EVB, "W90N960EVB") /* Maintainer: Wan ZongShun */ - .phys_io = W90X900_PA_UART, - .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, - .boot_params = 0, .map_io = nuc960evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc960evb_init, - .timer = &nuc900_timer, + .init_time = nuc900_timer_init, + .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c index a47dc9a708e..c58d142b8a4 100644 --- a/arch/arm/mach-w90x900/mfp.c +++ b/arch/arm/mach-w90x900/mfp.c @@ -26,19 +26,25 @@ #define REG_MFSEL (W90X900_VA_GCR + 0xC) #define GPSELF (0x01 << 1) - #define GPSELC (0x03 << 2) -#define ENKPI (0x02 << 2) -#define ENNAND (0x01 << 2) +#define GPSELD (0x0f << 4) #define GPSELEI0 (0x01 << 26) #define GPSELEI1 (0x01 << 27) #define GPIOG0TO1 (0x03 << 14) #define GPIOG2TO3 (0x03 << 16) +#define GPIOG22TO23 (0x03 << 22) +#define GPIOG18TO20 (0x07 << 18) + #define ENSPI (0x0a << 14) #define ENI2C0 (0x01 << 14) #define ENI2C1 (0x01 << 16) +#define ENAC97 (0x02 << 22) +#define ENSD1 (0x02 << 18) +#define ENSD0 (0x0a << 4) +#define ENKPI (0x02 << 2) +#define ENNAND (0x01 << 2) static DEFINE_MUTEX(mfp_mutex); @@ -124,16 +130,19 @@ void mfp_set_groupi(struct device *dev) } EXPORT_SYMBOL(mfp_set_groupi); -void mfp_set_groupg(struct device *dev) +void mfp_set_groupg(struct device *dev, const char *subname) { unsigned long mfpen; const char *dev_id; - BUG_ON(!dev); + BUG_ON((!dev) && (!subname)); mutex_lock(&mfp_mutex); - dev_id = dev_name(dev); + if (subname != NULL) + dev_id = subname; + else + dev_id = dev_name(dev); mfpen = __raw_readl(REG_MFSEL); @@ -146,6 +155,12 @@ void mfp_set_groupg(struct device *dev) } else if (strcmp(dev_id, "nuc900-i2c1") == 0) { mfpen &= ~(GPIOG2TO3); mfpen |= ENI2C1;/*enable i2c1*/ + } else if (strcmp(dev_id, "nuc900-ac97") == 0) { + mfpen &= ~(GPIOG22TO23); + mfpen |= ENAC97;/*enable AC97*/ + } else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) { + mfpen &= ~(GPIOG18TO20); + mfpen |= (ENSD1 | 0x01);/*enable sd1*/ } else { mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/ } @@ -156,3 +171,30 @@ void mfp_set_groupg(struct device *dev) } EXPORT_SYMBOL(mfp_set_groupg); +void mfp_set_groupd(struct device *dev, const char *subname) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON((!dev) && (!subname)); + + mutex_lock(&mfp_mutex); + + if (subname != NULL) + dev_id = subname; + else + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "nuc900-mmc-port0") == 0) { + mfpen &= ~GPSELD;/*enable sd0*/ + mfpen |= ENSD0; + } else + mfpen &= (~GPSELD); + + __raw_writel(mfpen, REG_MFSEL); + + mutex_unlock(&mfp_mutex); +} +EXPORT_SYMBOL(mfp_set_groupd); diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c index 656f03b3b62..1523f413698 100644 --- a/arch/arm/mach-w90x900/nuc910.c +++ b/arch/arm/mach-w90x900/nuc910.c @@ -26,6 +26,8 @@ static struct platform_device *nuc910_dev[] __initdata = { &nuc900_device_ts, &nuc900_device_rtc, + &nuc900_device_lcd, + &nuc900_device_kpi, }; /* define specific CPU platform io map */ diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h index 83e9ba5fc26..b14c71a9e68 100644 --- a/arch/arm/mach-w90x900/nuc910.h +++ b/arch/arm/mach-w90x900/nuc910.h @@ -12,14 +12,7 @@ * published by the Free Software Foundation. * */ - -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void nuc900_init_irq(void); -extern struct sys_timer nuc900_timer; +#include "nuc9xx.h" /* extern file from nuc910.c */ diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c index 149508116d1..5704f74a50e 100644 --- a/arch/arm/mach-w90x900/nuc950.c +++ b/arch/arm/mach-w90x900/nuc950.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <asm/mach/map.h> #include <mach/hardware.h> + #include "cpu.h" /* define specific CPU platform device */ @@ -25,6 +26,7 @@ static struct platform_device *nuc950_dev[] __initdata = { &nuc900_device_kpi, &nuc900_device_fmi, + &nuc900_device_lcd, }; /* define specific CPU platform io map */ diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h index 98a1148bc5a..6e9de3051cd 100644 --- a/arch/arm/mach-w90x900/nuc950.h +++ b/arch/arm/mach-w90x900/nuc950.h @@ -12,14 +12,7 @@ * published by the Free Software Foundation. * */ - -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void nuc900_init_irq(void); -extern struct sys_timer nuc900_timer; +#include "nuc9xx.h" /* extern file from nuc950.c */ diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h index f0c07cbe3a8..9f6df9a0028 100644 --- a/arch/arm/mach-w90x900/nuc960.h +++ b/arch/arm/mach-w90x900/nuc960.h @@ -12,14 +12,7 @@ * published by the Free Software Foundation. * */ - -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void nuc900_init_irq(void); -extern struct sys_timer nuc900_timer; +#include "nuc9xx.h" /* extern file from nuc960.c */ diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h new file mode 100644 index 00000000000..e3ab1e1381f --- /dev/null +++ b/arch/arm/mach-w90x900/nuc9xx.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-w90x900/nuc9xx.h + * + * Copied from nuc910.h, which had: + * + * Copyright (c) 2008 Nuvoton corporation + * + * Header file for NUC900 CPU support + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/reboot.h> + +struct map_desc; + +/* core initialisation functions */ + +extern void nuc900_init_irq(void); +extern void nuc900_timer_init(void); +extern void nuc9xx_restart(enum reboot_mode, const char *); diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index b80f769bc13..9230d372559 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -33,6 +33,8 @@ #include <mach/map.h> #include <mach/regs-timer.h> +#include "nuc9xx.h" + #define RESETINT 0x1f #define PERIOD (0x01 << 27) #define ONESHOT (0x00 << 27) @@ -43,7 +45,6 @@ #define PRESCALE 0x63 /* Divider = prescale + 1 */ #define TDR_SHIFT 24 -#define TDR_MASK ((1 << TDR_SHIFT) - 1) static unsigned int timer0_load; @@ -90,7 +91,6 @@ static int nuc900_clockevent_setnextevent(unsigned long evt, static struct clock_event_device nuc900_clockevent_device = { .name = "nuc900-timer0", - .shift = 32, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = nuc900_clockevent_setmode, .set_next_event = nuc900_clockevent_setnextevent, @@ -111,7 +111,7 @@ static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id) static struct irqaction nuc900_timer0_irq = { .name = "nuc900-timer0", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = nuc900_timer0_interrupt, }; @@ -132,31 +132,12 @@ static void __init nuc900_clockevents_init(void) __raw_writel(RESETINT, REG_TISR); setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); - nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC, - nuc900_clockevent_device.shift); - nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff, - &nuc900_clockevent_device); - nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf, - &nuc900_clockevent_device); nuc900_clockevent_device.cpumask = cpumask_of(0); - clockevents_register_device(&nuc900_clockevent_device); -} - -static cycle_t nuc900_get_cycles(struct clocksource *cs) -{ - return (~__raw_readl(REG_TDR1)) & TDR_MASK; + clockevents_config_and_register(&nuc900_clockevent_device, rate, + 0xf, 0xffffffff); } -static struct clocksource clocksource_nuc900 = { - .name = "nuc900-timer1", - .rating = 200, - .read = nuc900_get_cycles, - .mask = CLOCKSOURCE_MASK(TDR_SHIFT), - .shift = 10, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - static void __init nuc900_clocksource_init(void) { unsigned int val; @@ -176,17 +157,12 @@ static void __init nuc900_clocksource_init(void) val |= (COUNTEN | PERIOD | PRESCALE); __raw_writel(val, REG_TCSR1); - clocksource_nuc900.mult = - clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift); - clocksource_register(&clocksource_nuc900); + clocksource_mmio_init(REG_TDR1, "nuc900-timer1", rate, 200, + TDR_SHIFT, clocksource_mmio_readl_down); } -static void __init nuc900_timer_init(void) +void __init nuc900_timer_init(void) { nuc900_clocksource_init(); nuc900_clockevents_init(); } - -struct sys_timer nuc900_timer = { - .init = nuc900_timer_init, -}; |