1 files changed, 8 insertions, 32 deletions

diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index b80f769bc13..9230d372559 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -33,6 +33,8 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
+#include "nuc9xx.h"
+
 #define RESETINT	0x1f
 #define PERIOD		(0x01 << 27)
 #define ONESHOT		(0x00 << 27)
@@ -43,7 +45,6 @@
 #define PRESCALE	0x63 /* Divider = prescale + 1 */
 
 #define	TDR_SHIFT	24
-#define	TDR_MASK	((1 << TDR_SHIFT) - 1)
 
 static unsigned int timer0_load;
 
@@ -90,7 +91,6 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
 
 static struct clock_event_device nuc900_clockevent_device = {
 	.name		= "nuc900-timer0",
-	.shift		= 32,
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= nuc900_clockevent_setmode,
 	.set_next_event	= nuc900_clockevent_setnextevent,
@@ -111,7 +111,7 @@ static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
 
 static struct irqaction nuc900_timer0_irq = {
 	.name		= "nuc900-timer0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= nuc900_timer0_interrupt,
 };
 
@@ -132,31 +132,12 @@ static void __init nuc900_clockevents_init(void)
 	__raw_writel(RESETINT, REG_TISR);
 	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
 
-	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-					nuc900_clockevent_device.shift);
-	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-					&nuc900_clockevent_device);
-	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-					&nuc900_clockevent_device);
 	nuc900_clockevent_device.cpumask = cpumask_of(0);
 
-	clockevents_register_device(&nuc900_clockevent_device);
-}
-
-static cycle_t nuc900_get_cycles(struct clocksource *cs)
-{
-	return (~__raw_readl(REG_TDR1)) & TDR_MASK;
+	clockevents_config_and_register(&nuc900_clockevent_device, rate,
+					0xf, 0xffffffff);
 }
 
-static struct clocksource clocksource_nuc900 = {
-	.name	= "nuc900-timer1",
-	.rating	= 200,
-	.read	= nuc900_get_cycles,
-	.mask	= CLOCKSOURCE_MASK(TDR_SHIFT),
-	.shift	= 10,
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
 static void __init nuc900_clocksource_init(void)
 {
 	unsigned int val;
@@ -176,17 +157,12 @@ static void __init nuc900_clocksource_init(void)
 	val |= (COUNTEN | PERIOD | PRESCALE);
 	__raw_writel(val, REG_TCSR1);
 
-	clocksource_nuc900.mult =
-		clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
-	clocksource_register(&clocksource_nuc900);
+	clocksource_mmio_init(REG_TDR1, "nuc900-timer1", rate, 200,
+		TDR_SHIFT, clocksource_mmio_readl_down);
 }
 
-static void __init nuc900_timer_init(void)
+void __init nuc900_timer_init(void)
 {
 	nuc900_clocksource_init();
 	nuc900_clockevents_init();
 }
-
-struct sys_timer nuc900_timer = {
-	.init		= nuc900_timer_init,
-};