diff options
Diffstat (limited to 'arch/arm/mach-ux500')
50 files changed, 1382 insertions, 6130 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 53d3d46dec1..699e8601dbf 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,33 +1,46 @@ -if ARCH_U8500 - -config UX500_SOC_COMMON - bool - default y - select ARM_GIC - select HAS_MTU - select PL310_ERRATA_753970 +menuconfig ARCH_U8500 + bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 + depends on MMU + select AB8500_CORE + select ABX500_CORE + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA select ARM_ERRATA_754322 - select ARM_ERRATA_764369 + select ARM_ERRATA_764369 if SMP + select ARM_GIC select CACHE_L2X0 + select CLKSRC_NOMADIK_MTU + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP select PINCTRL + select PINCTRL_ABX500 select PINCTRL_NOMADIK + select PL310_ERRATA_753970 if CACHE_L2X0 + help + Support for ST-Ericsson's Ux500 architecture + +if ARCH_U8500 config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU + select PINCTRL_DB8500 + select PINCTRL_DB8540 + select PINCTRL_AB8500 + select PINCTRL_AB8505 + select PINCTRL_AB9540 + select PINCTRL_AB8540 select REGULATOR select REGULATOR_DB8500_PRCMU - select CPU_FREQ_TABLE if CPU_FREQ - select PINCTRL_DB8500 - -menu "Ux500 target platform (boards)" config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" - select UX500_SOC_DB8500 select I2C select I2C_NOMADIK + select REGULATOR + select REGULATOR_FIXED_VOLTAGE select SOC_BUS + select UX500_SOC_DB8500 help Include support for the MOP500 development platform. @@ -52,13 +65,6 @@ config UX500_AUTO_PLATFORM a working kernel. If everything else is disabled, this automatically enables MACH_MOP500. -config MACH_UX500_DT - bool "Generic U8500 support using device tree" - depends on MACH_MOP500 - select USE_OF - -endmenu - config UX500_DEBUG_UART int "Ux500 UART to use for low-level debug" default 2 diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 026086ff9e6..9741de956b3 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,16 +2,12 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := clock.o cpu.o devices.o devices-common.o \ - id.o usb.o timer.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-y := cpu.o id.o timer.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ - board-mop500-regulators.o \ - board-mop500-uib.o board-mop500-stuib.o \ - board-mop500-u8500uib.o \ - board-mop500-pins.o \ - board-mop500-msp.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \ + board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot index dd5cd00e255..760a0efe758 100644 --- a/arch/arm/mach-ux500/Makefile.boot +++ b/arch/arm/mach-ux500/Makefile.boot @@ -1,5 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c new file mode 100644 index 00000000000..b2a0899e745 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_data/dma-ste-dma40.h> + +#include <linux/platform_data/asoc-ux500-msp.h> + +#include "ste-dma40-db8500.h" +#include "board-mop500.h" + +static struct stedma40_chan_cfg msp0_dma_rx = { + .high_priority = true, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, +}; + +static struct stedma40_chan_cfg msp0_dma_tx = { + .high_priority = true, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, +}; + +struct msp_i2s_platform_data msp0_platform_data = { + .id = 0, + .msp_i2s_dma_rx = &msp0_dma_rx, + .msp_i2s_dma_tx = &msp0_dma_tx, +}; + +static struct stedma40_chan_cfg msp1_dma_rx = { + .high_priority = true, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV30_MSP3, +}; + +static struct stedma40_chan_cfg msp1_dma_tx = { + .high_priority = true, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV30_MSP1, +}; + +struct msp_i2s_platform_data msp1_platform_data = { + .id = 1, + .msp_i2s_dma_rx = NULL, + .msp_i2s_dma_tx = &msp1_dma_tx, +}; + +static struct stedma40_chan_cfg msp2_dma_rx = { + .high_priority = true, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV14_MSP2, +}; + +static struct stedma40_chan_cfg msp2_dma_tx = { + .high_priority = true, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV14_MSP2, + .use_fixed_channel = true, + .phy_channel = 1, +}; + +struct msp_i2s_platform_data msp2_platform_data = { + .id = 2, + .msp_i2s_dma_rx = &msp2_dma_rx, + .msp_i2s_dma_tx = &msp2_dma_tx, +}; + +struct msp_i2s_platform_data msp3_platform_data = { + .id = 3, + .msp_i2s_dma_rx = &msp1_dma_rx, + .msp_i2s_dma_tx = NULL, +}; diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c deleted file mode 100644 index 99604803874..00000000000 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/pinctrl/consumer.h> - -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> -#include <plat/ste_dma40.h> - -#include <mach/devices.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/msp.h> - -#include "ste-dma40-db8500.h" -#include "board-mop500.h" -#include "devices-db8500.h" -#include "pins-db8500.h" - -/* MSP1/3 Tx/Rx usage protection */ -static DEFINE_SPINLOCK(msp_rxtx_lock); - -/* Reference Count */ -static int msp_rxtx_ref; - -/* Pin modes */ -struct pinctrl *msp1_p; -struct pinctrl_state *msp1_def; -struct pinctrl_state *msp1_sleep; - -int msp13_i2s_init(void) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&msp_rxtx_lock, flags); - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) { - retval = pinctrl_select_state(msp1_p, msp1_def); - if (retval) - pr_err("could not set MSP1 defstate\n"); - } - if (!retval) - msp_rxtx_ref++; - spin_unlock_irqrestore(&msp_rxtx_lock, flags); - - return retval; -} - -int msp13_i2s_exit(void) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&msp_rxtx_lock, flags); - WARN_ON(!msp_rxtx_ref); - msp_rxtx_ref--; - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) { - retval = pinctrl_select_state(msp1_p, msp1_sleep); - if (retval) - pr_err("could not set MSP1 sleepstate\n"); - } - spin_unlock_irqrestore(&msp_rxtx_lock, flags); - - return retval; -} - -static struct stedma40_chan_cfg msp0_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp0_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct msp_i2s_platform_data msp0_platform_data = { - .id = MSP_I2S_0, - .msp_i2s_dma_rx = &msp0_dma_rx, - .msp_i2s_dma_tx = &msp0_dma_tx, -}; - -static struct stedma40_chan_cfg msp1_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp1_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct msp_i2s_platform_data msp1_platform_data = { - .id = MSP_I2S_1, - .msp_i2s_dma_rx = NULL, - .msp_i2s_dma_tx = &msp1_dma_tx, - .msp_i2s_init = msp13_i2s_init, - .msp_i2s_exit = msp13_i2s_exit, -}; - -static struct stedma40_chan_cfg msp2_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp2_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - .use_fixed_channel = true, - .phy_channel = 1, - - /* data_width is set during configuration */ -}; - -static struct platform_device *db8500_add_msp_i2s(struct device *parent, - int id, - resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) -{ - struct platform_device *pdev; - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", - id, irq); - pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); - if (!pdev) { - pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", - id); - return NULL; - } - - return pdev; -} - -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -/* Platform device for Ux500-PCM */ -static struct platform_device ux500_pcm = { - .name = "ux500-pcm", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -static struct msp_i2s_platform_data msp2_platform_data = { - .id = MSP_I2S_2, - .msp_i2s_dma_rx = &msp2_dma_rx, - .msp_i2s_dma_tx = &msp2_dma_tx, -}; - -static struct msp_i2s_platform_data msp3_platform_data = { - .id = MSP_I2S_3, - .msp_i2s_dma_rx = &msp1_dma_rx, - .msp_i2s_dma_tx = NULL, - .msp_i2s_init = msp13_i2s_init, - .msp_i2s_exit = msp13_i2s_exit, -}; - -int mop500_msp_init(struct device *parent) -{ - struct platform_device *msp1; - - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); - - pr_info("Initialize MSP I2S-devices.\n"); - db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, - &msp0_platform_data); - msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, - &msp1_platform_data); - db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, - &msp2_platform_data); - db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, - &msp3_platform_data); - - /* Get the pinctrl handle for MSP1 */ - if (msp1) { - msp1_p = pinctrl_get(&msp1->dev); - if (IS_ERR(msp1_p)) - dev_err(&msp1->dev, "could not get MSP1 pinctrl\n"); - else { - msp1_def = pinctrl_lookup_state(msp1_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(msp1_def)) { - dev_err(&msp1->dev, - "could not get MSP1 defstate\n"); - } - msp1_sleep = pinctrl_lookup_state(msp1_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(msp1_sleep)) - dev_err(&msp1->dev, - "could not get MSP1 idlestate\n"); - } - } - - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); - platform_device_register(&ux500_pcm); - - return 0; -} diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h deleted file mode 100644 index 6fcfb5e2cc9..00000000000 --- a/arch/arm/mach-ux500/board-mop500-msp.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2012 - * - * Author: Ola Lilja <ola.o.lilja@stericsson.com>, - * for ST-Ericsson. - * - * License terms: - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -void mop500_msp_init(struct device *parent); diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c deleted file mode 100644 index 32fd9920446..00000000000 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ /dev/null @@ -1,514 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/bug.h> -#include <linux/string.h> -#include <linux/pinctrl/machine.h> - -#include <asm/mach-types.h> -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> - -#include "pins-db8500.h" -#include "board-mop500.h" - -enum custom_pin_cfg_t { - PINS_FOR_DEFAULT, - PINS_FOR_U9500, -}; - -static enum custom_pin_cfg_t pinsfor; - -/* These simply sets bias for pins */ -#define BIAS(a,b) static unsigned long a[] = { b } - -BIAS(pd, PIN_PULL_DOWN); -BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); -BIAS(in_nopull, PIN_INPUT_NOPULL); -BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); -BIAS(in_pu, PIN_INPUT_PULLUP); -BIAS(in_pd, PIN_INPUT_PULLDOWN); -BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP); -BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW); -BIAS(out_hi, PIN_OUTPUT_HIGH); -BIAS(out_lo, PIN_OUTPUT_LOW); -BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); -/* These also force them into GPIO mode */ -BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); -BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); -BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); -BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); -BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); -BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); -/* Sleep modes */ -BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE); -BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); -BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); - -/* We use these to define hog settings that are always done on boot */ -#define DB8500_MUX_HOG(group,func) \ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) -#define DB8500_PIN_HOG(pin,conf) \ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) - -/* These are default states associated with device and changed runtime */ -#define DB8500_MUX(group,func,dev) \ - PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) -#define DB8500_PIN(pin,conf,dev) \ - PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) - -#define DB8500_PIN_SLEEP(pin,conf,dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ - pin, conf) - -/* Pin control settings */ -static struct pinctrl_map __initdata mop500_family_pinmap[] = { - /* - * uMSP0, mux in 4 pins, regular placement of RX/TX - * explicitly set the pins to no pull - */ - DB8500_MUX_HOG("msp0txrx_a_1", "msp0"), - DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"), - DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */ - DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */ - DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */ - DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */ - /* MSP2 for HDMI, pull down TXD, TCK, TFS */ - DB8500_MUX_HOG("msp2_a_1", "msp2"), - DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */ - DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */ - DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */ - DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */ - /* - * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to - * pull-up - * TODO: is this really correct? Snowball doesn't have a LCD. - */ - DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"), - DB8500_PIN_HOG("GPIO68_E1", in_pu), - DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu), - /* - * STMPE1601/tc35893 keypad IRQ GPIO 218 - * TODO: set for snowball and HREF really?? - */ - DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu), - /* - * UART0, we do not mux in u0 here. - * uart-0 pins gpio configuration should be kept intact to prevent - * a glitch in tx line when the tty dev is opened. Later these pins - * are configured to uart mop500_pins_uart0 - */ - DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ - DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */ - /* - * Mux in UART2 on altfunction C and set pull-ups. - * TODO: is this used on U8500 variants and Snowball really? - * The setting on GPIO31 conflicts with magnetometer use on hrefv60 - */ - DB8500_MUX_HOG("u2rxtx_c_1", "u2"), - DB8500_MUX_HOG("u2ctsrts_c_1", "u2"), - DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */ - DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */ - /* - * The following pin sets were known as "runtime pins" before being - * converted to the pinctrl model. Here we model them as "default" - * states. - */ - /* Mux in UART0 after initialization */ - DB8500_MUX("u0_a_1", "u0", "uart0"), - DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */ - DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ - DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ - DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ - /* UART0 sleep state */ - DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"), - /* MSP1 for ALSA codec */ - DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), - DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), - DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), - /* MSP1 sleep state */ - DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), - /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ - DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), - DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), - /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ - DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"), - /* Mux in I2C blocks, put pins into GPIO in sleepmode no pull-up */ - DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"), - DB8500_PIN("GPIO147_C15", slpm_gpio_nopull, "nmk-i2c.0"), - DB8500_PIN("GPIO148_B16", slpm_gpio_nopull, "nmk-i2c.0"), - DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"), - DB8500_PIN("GPIO16_AD3", slpm_gpio_nopull, "nmk-i2c.1"), - DB8500_PIN("GPIO17_AD4", slpm_gpio_nopull, "nmk-i2c.1"), - DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"), - DB8500_PIN("GPIO10_AF5", slpm_gpio_nopull, "nmk-i2c.2"), - DB8500_PIN("GPIO11_AG4", slpm_gpio_nopull, "nmk-i2c.2"), - DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"), - DB8500_PIN("GPIO229_AG7", slpm_gpio_nopull, "nmk-i2c.3"), - DB8500_PIN("GPIO230_AF7", slpm_gpio_nopull, "nmk-i2c.3"), - /* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */ - DB8500_MUX("mc0_a_1", "mc0", "sdi0"), - DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */ - DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */ - DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */ - DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */ - DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */ - DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */ - DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */ - DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */ - DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */ - DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */ - /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */ - DB8500_MUX("mc1_a_1", "mc1", "sdi1"), - DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */ - DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */ - DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */ - DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */ - DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */ - DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */ - DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */ - /* Mux in SDI2 (here called MC2) used for for PoP eMMC */ - DB8500_MUX("mc2_a_1", "mc2", "sdi2"), - DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */ - DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */ - DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */ - DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */ - DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */ - DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */ - DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */ - DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */ - DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */ - DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */ - DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */ - /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */ - DB8500_MUX("mc4_a_1", "mc4", "sdi4"), - DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */ - DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */ - DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */ - DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */ - DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */ - DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */ - DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */ - DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */ - DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */ - DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */ - DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */ - /* Mux in USB pins, drive STP high */ - DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), - DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ - /* Mux in SPI2 pins on the "other C1" altfunction */ - DB8500_MUX("spi2_oc1_1", "spi2", "spi2"), - DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ - DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ - DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ - DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ -}; - -/* - * These are specifically for the MOP500 and HREFP (pre-v60) version of the - * board, which utilized a TC35892 GPIO expander instead of using a lot of - * on-chip pins as the HREFv60 and later does. - */ -static struct pinctrl_map __initdata mop500_pinmap[] = { - /* Mux in SSP0, pull down RXD pin */ - DB8500_MUX_HOG("ssp0_a_1", "ssp0"), - DB8500_PIN_HOG("GPIO145_C13", pd), - /* - * XENON Flashgun on image processor GPIO (controlled from image - * processor firmware), mux in these image processor GPIO lines 0 - * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up - * the pins. - */ - DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), - DB8500_PIN_HOG("GPIO6_AF6", in_pu), - DB8500_PIN_HOG("GPIO7_AG5", in_pu), - /* TC35892 IRQ, pull up the line, let the driver mux in the pin */ - DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), - /* Mux in UART1 and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_MUX_HOG("u1ctsrts_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ - DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */ - /* - * Runtime stuff: make it possible to mux in the SKE keypad - * and bias the pins - */ - DB8500_MUX("kp_a_2", "kp", "ske"), - DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ - DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ - DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ - DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ - DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ - DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ - DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ - DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ - DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ - /* Mux in and drive the SDI0 DAT31DIR line high at runtime */ - DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"), - DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"), -}; - -/* - * The HREFv60 series of platforms is using available pins on the DB8500 - * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0 - * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines. - */ -static struct pinctrl_map __initdata hrefv60_pinmap[] = { - /* Drive WLAN_ENA low */ - DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */ - /* - * XENON Flashgun on image processor GPIO (controlled from image - * processor firmware), mux in these image processor GPIO lines 0 - * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant - * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias - * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. - */ - DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"), - DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */ - DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */ - DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */ - DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */ - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ - DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */ - DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */ - /* - * Display Interface 1 uses GPIO 65 for RST (reset). - * Display Interface 2 uses GPIO 66 for RST (reset). - * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) - */ - DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */ - DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */ - /* - * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and - * GPIO 67 for interrupts. Pull-up the IRQ line and drive both - * reset signals low. - */ - DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */ - DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */ - DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */ - /* - * Drive D19-D23 for the ETM PTM trace interface low, - * (presumably pins are unconnected therefore grounded here, - * the "other alt C1" setting enables these pins) - */ - DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo), - DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo), - DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo), - DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo), - DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo), - /* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */ - DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */ - DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */ - /* NFC ENA and RESET to low, pulldown IRQ line */ - DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */ - DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */ - DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */ - /* - * SKE keyboard partly on alt A and partly on "Other alt C1" - * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three - * rows of 6 keys, then pull up force sensing interrup and - * drive reset and force sensing WU low. - */ - DB8500_MUX_HOG("kp_a_1", "kp"), - DB8500_MUX_HOG("kp_oc1_1", "kp"), - DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */ - DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */ - DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */ - DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */ - DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */ - DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */ - DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */ - DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */ - DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */ - DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */ - DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */ - /* DiPro Sensor interrupt */ - DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */ - /* Audio Amplifier HF enable */ - DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */ - /* GBF interface, pull low to reset state */ - DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */ - /* MSP : HDTV INTERFACE GPIO line */ - DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd), - /* Accelerometer interrupt lines */ - DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */ - DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */ - /* SD card detect GPIO pin */ - DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu), - /* - * Runtime stuff - * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor - * etc. - */ - DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), - DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), - DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), - /* - * Make it possible to mux in the SKE keypad and bias the pins - * FIXME: what's the point with this on HREFv60? KP/SKE is already - * muxed in at another place! Enabling this will bork. - */ - DB8500_MUX("kp_a_2", "kp", "ske"), - DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ - DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ - DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ - DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ - DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ - DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ - DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ - DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ - DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ -}; - -static struct pinctrl_map __initdata u9500_pinmap[] = { - /* Mux in UART1 (just RX/TX) and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), - DB8500_PIN_HOG("GPIO5_AG6", out_hi), - /* WLAN_IRQ line */ - DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu), - /* HSI */ - DB8500_MUX_HOG("hsir_a_1", "hsi"), - DB8500_MUX_HOG("hsit_a_1", "hsi"), - DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */ - DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */ - DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */ - DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */ - DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */ - DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */ - DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */ - DB8500_PIN_HOG("GPIO226_AF8", out_hi), /* ACWAKE0 */ -}; - -static struct pinctrl_map __initdata u8500_pinmap[] = { - DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */ - DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */ -}; - -static struct pinctrl_map __initdata snowball_pinmap[] = { - /* Mux in SSP0 connected to AB8500, pull down RXD pin */ - DB8500_MUX_HOG("ssp0_a_1", "ssp0"), - DB8500_PIN_HOG("GPIO145_C13", pd), - /* Always drive the MC0 DAT31DIR line high on these boards */ - DB8500_PIN_HOG("GPIO21_AB3", out_hi), - /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ - DB8500_MUX_HOG("sm_b_1", "sm"), - /* Drive RSTn_LAN high */ - DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), - /* Accelerometer/Magnetometer */ - DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */ - DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */ - DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */ - /* WLAN/GBF */ - DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */ - DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */ - DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */ - DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */ -}; - -/* - * passing "pinsfor=" in kernel cmdline allows for custom - * configuration of GPIOs on u8500 derived boards. - */ -static int __init early_pinsfor(char *p) -{ - pinsfor = PINS_FOR_DEFAULT; - - if (strcmp(p, "u9500-21") == 0) - pinsfor = PINS_FOR_U9500; - - return 0; -} -early_param("pinsfor", early_pinsfor); - -int pins_for_u9500(void) -{ - if (pinsfor == PINS_FOR_U9500) - return 1; - - return 0; -} - -static void __init mop500_href_family_pinmaps_init(void) -{ - switch (pinsfor) { - case PINS_FOR_U9500: - pinctrl_register_mappings(u9500_pinmap, - ARRAY_SIZE(u9500_pinmap)); - break; - case PINS_FOR_DEFAULT: - pinctrl_register_mappings(u8500_pinmap, - ARRAY_SIZE(u8500_pinmap)); - default: - break; - } -} - -void __init mop500_pinmaps_init(void) -{ - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(mop500_pinmap, - ARRAY_SIZE(mop500_pinmap)); - mop500_href_family_pinmaps_init(); -} - -void __init snowball_pinmaps_init(void) -{ - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(snowball_pinmap, - ARRAY_SIZE(snowball_pinmap)); - pinctrl_register_mappings(u8500_pinmap, - ARRAY_SIZE(u8500_pinmap)); -} - -void __init hrefv60_pinmaps_init(void) -{ - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(hrefv60_pinmap, - ARRAY_SIZE(hrefv60_pinmap)); - mop500_href_family_pinmaps_init(); -} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 52426a42578..a4e139aa244 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -5,6 +5,7 @@ * * Authors: Sundar Iyer <sundar.iyer@stericsson.com> * Bengt Jonsson <bengt.g.jonsson@stericsson.com> + * Daniel Willerud <daniel.willerud@stericsson.com> * * MOP500 board specific initialization for regulators */ @@ -12,6 +13,22 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> #include "board-mop500-regulators.h" +#include "id.h" + +static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +struct regulator_init_data gpio_en_3v3_regulator = { + .constraints = { + .name = "EN-3V3", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers), + .consumer_supplies = gpio_en_3v3_consumers, +}; /* * TPS61052 regulator @@ -38,21 +55,37 @@ struct regulator_init_data tps61052_regulator = { }; static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* External displays, connector on board 2v5 power supply */ - REGULATOR_SUPPLY("vaux12v5", "mcde.0"), + /* Main display, u8500 R3 uib */ + REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), + /* Main display, u8500 uib and ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), + /* Secondary display, ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), /* SFH7741 proximity sensor */ REGULATOR_SUPPLY("vcc", "gpio-keys.0"), /* BH1780GLS ambient light sensor */ REGULATOR_SUPPLY("vcc", "2-0029"), /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "3-0018"), + REGULATOR_SUPPLY("vdd", "2-0018"), + /* lsm303dlhc accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0019"), /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "3-001e"), + REGULATOR_SUPPLY("vdd", "2-001e"), /* Rohm BU21013 Touchscreen devices */ REGULATOR_SUPPLY("avdd", "3-005c"), REGULATOR_SUPPLY("avdd", "3-005d"), /* Synaptics RMI4 Touchscreen device */ REGULATOR_SUPPLY("vdd", "3-004b"), + /* L3G4200D Gyroscope device */ + REGULATOR_SUPPLY("vdd", "2-0068"), + /* Ambient light sensor device */ + REGULATOR_SUPPLY("vdd", "3-0029"), + /* Pressure sensor device */ + REGULATOR_SUPPLY("vdd", "2-005c"), + /* Cypress TrueTouch Touchscreen device */ + REGULATOR_SUPPLY("vcpin", "spi8.0"), + /* Camera device */ + REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { @@ -60,18 +93,50 @@ static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { REGULATOR_SUPPLY("vmmc", "sdi4"), /* AB8500 audio codec */ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), + /* AB8500 accessory detect 1 */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), + /* AV8100 HDMI device */ + REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), }; static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + REGULATOR_SUPPLY("v-SD-STM", "stm"), /* External MMC slot power */ REGULATOR_SUPPLY("vmmc", "sdi0"), }; +static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { + /* AB8500 audio codec device */ + REGULATOR_SUPPLY("v-aux8", NULL), +}; + +static struct regulator_consumer_supply ab8505_vadc_consumers[] = { + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), +}; + static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { /* TV-out DENC supply */ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), /* Internal general-purpose ADC */ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), }; static struct regulator_consumer_supply ab8500_vaud_consumers[] = { @@ -99,77 +164,90 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { REGULATOR_SUPPLY("v-intcore", NULL), /* USB Transceiver */ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), + /* Handled by abx500 clk driver */ + REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), +}; + +static struct regulator_consumer_supply ab8505_usb_consumers[] = { + /* HS USB OTG physical interface */ + REGULATOR_SUPPLY("v-ape", NULL), }; static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* External displays, connector on board, 1v8 power supply */ - REGULATOR_SUPPLY("vsmps2", "mcde.0"), + /* DB8500 DSI */ + REGULATOR_SUPPLY("vdddsi1v2", "mcde"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), + /* DB8500 CSI */ + REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), }; /* ab8500 regulator register initialization */ -struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { +static struct ab8500_regulator_reg_init ab8500_reg_init[] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), /* * VextSupply2RequestCtrl = HP/LP depending on VxRequest * VextSupply3RequestCtrl = HP/LP depending on VxRequest * Vaux1RequestCtrl = HP/LP depending on VxRequest * Vaux2RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), /* * Vaux3RequestCtrl = HP/LP depending on VxRequest * SwHPReq = Control through SWValid disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), /* * VanaSysClkReq1HPValid = disabled * Vaux1SysClkReq1HPValid = disabled * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), /* * VanaHwHPReq1Valid = disabled * Vaux1HwHPreq1Valid = disabled * Vaux2HwHPReq1Valid = disabled * Vaux3HwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq1Valid = disabled * VextSupply2HwHPReq1Valid = disabled * VextSupply3HwHPReq1Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), /* * VanaHwHPReq2Valid = disabled * Vaux1HwHPReq2Valid = disabled * Vaux2HwHPReq2Valid = disabled * Vaux3HwHPReq2Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq2Valid = disabled * VextSupply2HwHPReq2Valid = disabled * VextSupply3HwHPReq2Valid = HWReq2 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), /* * VanaSwHPReqValid = disabled * Vaux1SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), /* * Vaux2SwHPReqValid = disabled * Vaux3SwHPReqValid = disabled @@ -177,7 +255,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VextSupply2SwHPReqValid = disabled * VextSupply3SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), /* * SysClkReq2Valid1 = SysClkReq2 controlled * SysClkReq3Valid1 = disabled @@ -187,7 +265,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid1 = disabled * SysClkReq8Valid1 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), /* * SysClkReq2Valid2 = disabled * SysClkReq3Valid2 = disabled @@ -197,7 +275,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid2 = disabled * SysClkReq8Valid2 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), /* * VTVoutEna = disabled * Vintcore12Ena = disabled @@ -205,66 +283,62 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vintcore12LP = inactive (HP) * VTVoutLP = inactive (HP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), /* * VaudioEna = disabled * VdmicEna = disabled * Vamic1Ena = disabled * Vamic2Ena = disabled */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), /* * Vamic1_dzout = high-Z when Vamic1 is disabled * Vamic2_dzout = high-Z when Vamic2 is disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), /* - * VPll = Hw controlled + * VPll = Hw controlled (NOTE! PRCMU bits) * VanaRegu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), /* * VrefDDREna = disabled * VrefDDRSleepMode = inactive (no pulldown) */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), /* - * VextSupply1Regu = HW control - * VextSupply2Regu = HW control - * VextSupply3Regu = HW control + * VextSupply1Regu = force LP + * VextSupply2Regu = force OFF + * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), /* * Vaux1Regu = force HP * Vaux2Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), - /* - * Vaux3regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), /* - * Vsmps1 = 1.15V + * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), /* - * Vaux1Sel = 2.5 V + * Vaux1Sel = 2.8 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), /* * Vaux2Sel = 2.9 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), /* * Vaux3Sel = 2.91 V */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), /* * VextSupply12LP = disabled (no LP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), /* * Vaux1Disch = short discharge time * Vaux2Disch = short discharge time @@ -273,57 +347,59 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VTVoutDisch = short discharge time * VaudioDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), /* * VanaDisch = short discharge time * VdmicPullDownEna = pulldown disabled when Vdmic is disabled * VdmicDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), }; /* AB8500 regulators */ -struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { +static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-DISPLAY", - .min_uV = 2500000, - .max_uV = 2900000, + .min_uV = 2800000, + .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, .boot_on = 1, /* display is on at boot */ - /* - * This voltage cannot be disabled right now because - * it is somehow affecting the external MMC - * functionality, though that typically will use - * AUX3. - */ - .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-eMMC1", .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), .consumer_supplies = ab8500_vaux2_consumers, }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-MMC-SD", .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), .consumer_supplies = ab8500_vaux3_consumers, @@ -377,18 +453,613 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { [AB8500_LDO_INTCORE] = { .constraints = { .name = "V-INTCORE", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), .consumer_supplies = ab8500_vintcore_consumers, }, - /* supply for U8500 CSI/DSI, VANA LDO */ + /* supply for U8500 CSI-DSI, VANA LDO */ [AB8500_LDO_ANA] = { .constraints = { - .name = "V-CSI/DSI", + .name = "V-CSI-DSI", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), .consumer_supplies = ab8500_vana_consumers, }, }; + +/* supply for VextSupply3 */ +static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { + /* SIM supply for 3 V SIM cards */ + REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), +}; + +/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ +static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { + .hwreq = true, +}; + +/* + * AB8500 external regulators + */ +static struct regulator_init_data ab8500_ext_regulators[] = { + /* fixed Vbat supplies VSMPS1_EXT_1V8 */ + [AB8500_EXT_SUPPLY1] = { + .constraints = { + .name = "ab8500-ext-supply1", + .min_uV = 1800000, + .max_uV = 1800000, + .initial_mode = REGULATOR_MODE_IDLE, + .boot_on = 1, + .always_on = 1, + }, + }, + /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ + [AB8500_EXT_SUPPLY2] = { + .constraints = { + .name = "ab8500-ext-supply2", + .min_uV = 1360000, + .max_uV = 1360000, + }, + }, + /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ + [AB8500_EXT_SUPPLY3] = { + .constraints = { + .name = "ab8500-ext-supply3", + .min_uV = 3400000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = + ARRAY_SIZE(ab8500_ext_supply3_consumers), + .consumer_supplies = ab8500_ext_supply3_consumers, + }, +}; + +/* ab8505 regulator register initialization */ +static struct ab8500_regulator_reg_init ab8505_reg_init[] = { + /* + * VarmRequestCtrl + * VsmpsCRequestCtrl + * VsmpsARequestCtrl + * VsmpsBRequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), + /* + * VsafeRequestCtrl + * VpllRequestCtrl + * VanaRequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), + /* + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), + /* + * VsmpsASysClkReq1HPValid + * VsmpsBSysClkReq1HPValid + * VsafeSysClkReq1HPValid + * VanaSysClkReq1HPValid = disabled + * VpllSysClkReq1HPValid + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), + /* + * VsmpsCSysClkReq1HPValid + * VarmSysClkReq1HPValid + * VbbSysClkReq1HPValid + * VsmpsMSysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq1Valid + * VsmpsBHwHPReq1Valid + * VsafeHwHPReq1Valid + * VanaHwHPReq1Valid = disabled + * VpllHwHPReq1Valid + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq1Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq2Valid + * VsmpsBHwHPReq2Valid + * VsafeHwHPReq2Valid + * VanaHwHPReq2Valid = disabled + * VpllHwHPReq2Valid + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq2Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), + /** + * VsmpsCSwHPReqValid + * VarmSwHPReqValid + * VsmpsASwHPReqValid + * VsmpsBSwHPReqValid + * VsafeSwHPReqValid + * VanaSwHPReqValid + * VanaSwHPReqValid = disabled + * VpllSwHPReqValid + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VsmpsMSwHPReqValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), + /* + * Vaux4SwHPReqValid + * Vaux4HwHPReq2Valid + * Vaux4HwHPReq1Valid + * Vaux4SysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), + /* + * VadcEna = disabled + * VintCore12Ena = disabled + * VintCore12Sel = 1.25 V + * VintCore12LP = inactive (HP) + * VadcLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), + /* + * VaudioEna = disabled + * Vaux8Ena = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), + /* + * VsmpsARegu + * VsmpsASelCtrl + * VsmpsAAutoMode + * VsmpsAPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), + /* + * VsmpsBRegu + * VsmpsBSelCtrl + * VsmpsBAutoMode + * VsmpsBPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), + /* + * VsafeRegu + * VsafeSelCtrl + * VsafeAutoMode + * VsafePWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), + /* + * VPll = Hw controlled (NOTE! PRCMU bits) + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), + /* + * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), + /* + * Vaux3Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), + /* + * VsmpsASel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), + /* + * VsmpsASel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), + /* + * VsmpsASel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), + /* + * VsmpsBSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), + /* + * VsmpsBSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), + /* + * VsmpsBSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), + /* + * VsafeSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), + /* + * VsafeSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), + /* + * VsafeSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), + /* + * Vaux1Sel = 2.8 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), + /* + * Vaux4RequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), + /* + * Vaux4Regu + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), + /* + * Vaux4Sel + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), + /* + * VanaDisch = short discharge time + * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled + * Vaux8Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), + /* + * Vaux4Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), + /* + * Vaux5Sel + * Vaux5LP + * Vaux5Ena + * Vaux5Disch + * Vaux5DisSfst + * Vaux5DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), + /* + * Vaux6Sel + * Vaux6LP + * Vaux6Ena + * Vaux6DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), +}; + +struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { + /* supplies to the display/camera */ + [AB8505_LDO_AUX1] = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* display is on at boot */ + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, + }, + /* supplies to the on-board eMMC */ + [AB8505_LDO_AUX2] = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, + }, + /* supply for VAUX3, supplies to SDcard slots */ + [AB8505_LDO_AUX3] = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, + }, + /* supply for VAUX4, supplies to NFC and standalone secure element */ + [AB8505_LDO_AUX4] = { + .constraints = { + .name = "V-NFC-SE", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), + .consumer_supplies = ab8505_vaux4_consumers, + }, + /* supply for VAUX5, supplies to TBD */ + [AB8505_LDO_AUX5] = { + .constraints = { + .name = "V-AUX5", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), + .consumer_supplies = ab8505_vaux5_consumers, + }, + /* supply for VAUX6, supplies to TBD */ + [AB8505_LDO_AUX6] = { + .constraints = { + .name = "V-AUX6", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), + .consumer_supplies = ab8505_vaux6_consumers, + }, + /* supply for gpadc, ADC LDO */ + [AB8505_LDO_ADC] = { + .constraints = { + .name = "V-ADC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), + .consumer_supplies = ab8505_vadc_consumers, + }, + /* supply for ab8500-vaudio, VAUDIO LDO */ + [AB8505_LDO_AUDIO] = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, + }, + /* supply for v-anamic1 VAMic1-LDO */ + [AB8505_LDO_ANAMIC1] = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, + }, + /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ + [AB8505_LDO_ANAMIC2] = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, + }, + /* supply for v-aux8, VAUX8 LDO */ + [AB8505_LDO_AUX8] = { + .constraints = { + .name = "V-AUX8", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), + .consumer_supplies = ab8505_vaux8_consumers, + }, + /* supply for v-intcore12, VINTCORE12 LDO */ + [AB8505_LDO_INTCORE] = { + .constraints = { + .name = "V-INTCORE", + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, + }, + /* supply for LDO USB */ + [AB8505_LDO_USB] = { + .constraints = { + .name = "V-USB", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), + .consumer_supplies = ab8505_usb_consumers, + }, + /* supply for U8500 CSI-DSI, VANA LDO */ + [AB8505_LDO_ANA] = { + .constraints = { + .name = "V-CSI-DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, + }, +}; + +struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { + .reg_init = ab8500_reg_init, + .num_reg_init = ARRAY_SIZE(ab8500_reg_init), + .regulator = ab8500_regulators, + .num_regulator = ARRAY_SIZE(ab8500_regulators), + .ext_regulator = ab8500_ext_regulators, + .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), +}; + +struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { + .reg_init = ab8505_reg_init, + .num_reg_init = ARRAY_SIZE(ab8505_reg_init), + .regulator = ab8505_regulators, + .num_regulator = ARRAY_SIZE(ab8505_regulators), +}; + +static void ab8500_modify_reg_init(int id, u8 mask, u8 value) +{ + int i; + + if (cpu_is_u8520()) { + for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { + if (ab8505_reg_init[i].id == id) { + u8 initval = ab8505_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8505_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8505_reg_init[i].mask); + return; + } + } + } else { + for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { + if (ab8500_reg_init[i].id == id) { + u8 initval = ab8500_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8500_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8500_reg_init[i].mask); + return; + } + } + } + + BUG_ON(1); +} + +void mop500_regulator_init(void) +{ + struct regulator_init_data *regulator; + + /* + * Temporarily turn on Vaux2 on 8520 machine + */ + if (cpu_is_u8520()) { + /* Vaux2 initialized to be on */ + ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); + } + + /* + * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for + * all HREFP_V20 boards) + */ + if (cpu_is_u8500v20()) { + /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ + ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); + + /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ + ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, + 0x20, 0x20); + + /* VextSupply2 = force HP at initialization */ + ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); + + /* enable VextSupply2 during platform active */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.always_on = 1; + + /* disable VextSupply2 in suspend */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.state_mem.disabled = 1; + regulator->constraints.state_standby.disabled = 1; + + /* enable VextSupply2 HW control (used in suspend) */ + regulator->driver_data = (void *)&ab8500_ext_supply2; + } +} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 94992158d96..9bece38fe93 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -14,9 +14,11 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> -extern struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; -extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; +extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; +extern struct regulator_init_data gpio_en_3v3_regulator; + +void mop500_regulator_init(void); #endif diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c deleted file mode 100644 index 920251cf834..00000000000 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> -#include <plat/ste_dma40.h> -#include <mach/devices.h> -#include <mach/hardware.h> - -#include "devices-db8500.h" -#include "board-mop500.h" -#include "ste-dma40-db8500.h" - -/* - * v2 has a new version of this block that need to be forced, the number found - * in hardware is incorrect - */ -#define U8500_SDI_V2_PERIPHID 0x10480180 - -/* - * SDI 0 (MicroSD slot) - */ - -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - -static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios) -{ - switch (ios->power_mode) { - case MMC_POWER_UP: - case MMC_POWER_ON: - /* - * Level shifter voltage should depend on vdd to when deciding - * on either 1.8V or 2.9V. Once the decision has been made the - * level shifter must be disabled and re-enabled with a changed - * select signal in order to switch the voltage. Since there is - * no framework support yet for indicating 1.8V in vdd, use the - * default 2.9V. - */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - break; - case MMC_POWER_OFF: - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 0); - break; - } - - return 0; -} - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; - -static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; -#endif - -static struct mmci_platform_data mop500_sdi0_data = { - .ios_handler = mop500_sdi0_ios_handler, - .ocr_mask = MMC_VDD_29_30, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_SD_HIGHSPEED | - MMC_CAP_MMC_HIGHSPEED, - .gpio_wp = -1, - .sigdir = MCI_ST_FBCLKEN | - MCI_ST_CMDDIREN | - MCI_ST_DATA0DIREN | - MCI_ST_DATA2DIREN, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi0_dma_cfg_rx, - .dma_tx_param = &mop500_sdi0_dma_cfg_tx, -#endif -}; - -static void sdi0_configure(struct device *parent) -{ - int ret; - - ret = gpio_request(sdi0_en, "level shifter enable"); - if (!ret) - ret = gpio_request(sdi0_vsel, - "level shifter 1v8-3v select"); - - if (ret) { - pr_warning("unable to config sdi0 gpios for level shifter.\n"); - return; - } - - /* Select the default 2.9V and enable level shifter */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - - /* Add the device, force v2 to subrevision 1 */ - db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); -} - -void mop500_sdi_tc35892_init(struct device *parent) -{ - mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; - sdi0_en = GPIO_SDMMC_EN; - sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; - sdi0_configure(parent); -} - -/* - * SDI1 (SDIO WLAN) - */ -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; - -static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; -#endif - -static struct mmci_platform_data mop500_sdi1_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &sdi1_dma_cfg_rx, - .dma_tx_param = &sdi1_dma_cfg_tx, -#endif -}; - -/* - * SDI 2 (POP eMMC, not on DB8500ed) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; - -static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; -#endif - -static struct mmci_platform_data mop500_sdi2_data = { - .ocr_mask = MMC_VDD_165_195, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi2_dma_cfg_rx, - .dma_tx_param = &mop500_sdi2_dma_cfg_tx, -#endif -}; - -/* - * SDI 4 (on-board eMMC) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; - -static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; -#endif - -static struct mmci_platform_data mop500_sdi4_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi4_dma_cfg_rx, - .dma_tx_param = &mop500_sdi4_dma_cfg_tx, -#endif -}; - -void __init mop500_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - - /* - * On boards with the TC35892 GPIO expander, sdi0 will finally - * be added when the TC35892 initializes and calls - * mop500_sdi_tc35892_init() above. - */ -} - -void __init snowball_sdi_init(struct device *parent) -{ - /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ - mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; - mop500_sdi0_data.cd_invert = true; - sdi0_en = SNOWBALL_SDMMC_EN_GPIO; - sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; - sdi0_configure(parent); -} - -void __init hrefv60_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; - sdi0_configure(parent); - /* WLAN SDIO channel */ - db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); -} diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c deleted file mode 100644 index 8c979770d87..00000000000 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mfd/stmpe.h> -#include <linux/input/bu21013.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/input/matrix_keypad.h> -#include <asm/mach-types.h> - -#include "board-mop500.h" - -/* STMPE/SKE keypad use this key layout */ -static const unsigned int mop500_keymap[] = { - KEY(2, 5, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(3, 5, KEY_VOLUMEDOWN), - KEY(1, 3, KEY_3), - KEY(5, 2, KEY_RIGHT), - KEY(5, 0, KEY_9), - - KEY(0, 5, KEY_MENU), - KEY(7, 6, KEY_ENTER), - KEY(4, 5, KEY_0), - KEY(6, 7, KEY_2), - KEY(3, 4, KEY_UP), - KEY(3, 3, KEY_DOWN), - - KEY(6, 4, KEY_SEND), - KEY(6, 2, KEY_BACK), - KEY(4, 2, KEY_VOLUMEUP), - KEY(5, 5, KEY_1), - KEY(4, 3, KEY_LEFT), - KEY(3, 2, KEY_7), -}; - -static const struct matrix_keymap_data mop500_keymap_data = { - .keymap = mop500_keymap, - .keymap_size = ARRAY_SIZE(mop500_keymap), -}; -/* - * STMPE1601 - */ -static struct stmpe_keypad_platform_data stmpe1601_keypad_data = { - .debounce_ms = 64, - .scan_count = 8, - .no_autorepeat = true, - .keymap_data = &mop500_keymap_data, -}; - -static struct stmpe_platform_data stmpe1601_data = { - .id = 1, - .blocks = STMPE_BLOCK_KEYPAD, - .irq_trigger = IRQF_TRIGGER_FALLING, - .irq_base = MOP500_STMPE1601_IRQ(0), - .keypad = &stmpe1601_keypad_data, - .autosleep = true, - .autosleep_timeout = 1024, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = { - { - I2C_BOARD_INFO("stmpe1601", 0x40), - .irq = NOMADIK_GPIO_TO_IRQ(218), - .platform_data = &stmpe1601_data, - .flags = I2C_CLIENT_WAKE, - }, -}; - -/* - * BU21013 ROHM touchscreen interface on the STUIBs - */ - -/* tracks number of bu21013 devices being enabled */ -static int bu21013_devices; - -#define TOUCH_GPIO_PIN 84 - -#define TOUCH_XMAX 384 -#define TOUCH_YMAX 704 - -#define PRCMU_CLOCK_OCR 0x1CC -#define TSC_EXT_CLOCK_9_6MHZ 0x840000 - -/** - * bu21013_gpio_board_init : configures the touch panel. - * @reset_pin: reset pin number - * This function can be used to configures - * the voltage and reset the touch panel controller. - */ -static int bu21013_gpio_board_init(int reset_pin) -{ - int retval = 0; - - bu21013_devices++; - if (bu21013_devices == 1) { - retval = gpio_request(reset_pin, "touchp_reset"); - if (retval) { - printk(KERN_ERR "Unable to request gpio reset_pin"); - return retval; - } - retval = gpio_direction_output(reset_pin, 1); - if (retval < 0) { - printk(KERN_ERR "%s: gpio direction failed\n", - __func__); - return retval; - } - } - - return retval; -} - -/** - * bu21013_gpio_board_exit : deconfigures the touch panel controller - * @reset_pin: reset pin number - * This function can be used to deconfigures the chip selection - * for touch panel controller. - */ -static int bu21013_gpio_board_exit(int reset_pin) -{ - int retval = 0; - - if (bu21013_devices == 1) { - retval = gpio_direction_output(reset_pin, 0); - if (retval < 0) { - printk(KERN_ERR "%s: gpio direction failed\n", - __func__); - return retval; - } - gpio_set_value(reset_pin, 0); - } - bu21013_devices--; - - return retval; -} - -/** - * bu21013_read_pin_val : get the interrupt pin value - * This function can be used to get the interrupt pin value for touch panel - * controller. - */ -static int bu21013_read_pin_val(void) -{ - return gpio_get_value(TOUCH_GPIO_PIN); -} - -static struct bu21013_platform_device tsc_plat_device = { - .cs_en = bu21013_gpio_board_init, - .cs_dis = bu21013_gpio_board_exit, - .irq_read_val = bu21013_read_pin_val, - .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), - .touch_x_max = TOUCH_XMAX, - .touch_y_max = TOUCH_YMAX, - .ext_clk = false, - .x_flip = false, - .y_flip = true, -}; - -static struct bu21013_platform_device tsc_plat2_device = { - .cs_en = bu21013_gpio_board_init, - .cs_dis = bu21013_gpio_board_exit, - .irq_read_val = bu21013_read_pin_val, - .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), - .touch_x_max = TOUCH_XMAX, - .touch_y_max = TOUCH_YMAX, - .ext_clk = false, - .x_flip = false, - .y_flip = true, -}; - -static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { - { - I2C_BOARD_INFO("bu21013_tp", 0x5C), - .platform_data = &tsc_plat_device, - }, - { - I2C_BOARD_INFO("bu21013_tp", 0x5D), - .platform_data = &tsc_plat2_device, - }, - -}; - -void __init mop500_stuib_init(void) -{ - if (machine_is_hrefv60()) { - tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - } else { - tsc_plat_device.cs_pin = GPIO_BU21013_CS; - tsc_plat2_device.cs_pin = GPIO_BU21013_CS; - - } - - mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib, - ARRAY_SIZE(mop500_i2c0_devices_stuib)); - - mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib, - ARRAY_SIZE(u8500_i2c3_devices_stuib)); -} diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c deleted file mode 100644 index ead91c968ff..00000000000 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Board data for the U8500 UIB, also known as the New UIB - * License terms: GNU General Public License (GPL), version 2 - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/mfd/tc3589x.h> -#include <linux/input/matrix_keypad.h> - -#include <mach/irqs.h> - -#include "board-mop500.h" - -/* Dummy data that can be overridden by staging driver */ -struct i2c_board_info __initdata __weak mop500_i2c3_devices_u8500[] = { -}; - -/* - * TC35893 - */ -static const unsigned int u8500_keymap[] = { - KEY(3, 1, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(6, 4, KEY_VOLUMEDOWN), - KEY(4, 2, KEY_EMAIL), - KEY(3, 3, KEY_RIGHT), - KEY(2, 5, KEY_BACKSPACE), - - KEY(6, 7, KEY_MENU), - KEY(5, 0, KEY_ENTER), - KEY(4, 3, KEY_0), - KEY(3, 4, KEY_DOT), - KEY(5, 2, KEY_UP), - KEY(3, 5, KEY_DOWN), - - KEY(4, 5, KEY_SEND), - KEY(0, 5, KEY_BACK), - KEY(6, 2, KEY_VOLUMEUP), - KEY(1, 3, KEY_SPACE), - KEY(7, 6, KEY_LEFT), - KEY(5, 5, KEY_SEARCH), -}; - -static struct matrix_keymap_data u8500_keymap_data = { - .keymap = u8500_keymap, - .keymap_size = ARRAY_SIZE(u8500_keymap), -}; - -static struct tc3589x_keypad_platform_data tc35893_data = { - .krow = TC_KPD_ROWS, - .kcol = TC_KPD_COLUMNS, - .debounce_period = TC_KPD_DEBOUNCE_PERIOD, - .settle_time = TC_KPD_SETTLE_TIME, - .irqtype = IRQF_TRIGGER_FALLING, - .enable_wakeup = true, - .keymap_data = &u8500_keymap_data, - .no_autorepeat = true, -}; - -static struct tc3589x_platform_data tc3589x_keypad_data = { - .block = TC3589x_BLOCK_KEYPAD, - .keypad = &tc35893_data, - .irq_base = MOP500_EGPIO_IRQ_BASE, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = { - { - I2C_BOARD_INFO("tc3589x", 0x44), - .platform_data = &tc3589x_keypad_data, - .irq = NOMADIK_GPIO_TO_IRQ(218), - .flags = I2C_CLIENT_WAKE, - }, -}; - - -void __init mop500_u8500uib_init(void) -{ - mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500, - ARRAY_SIZE(mop500_i2c3_devices_u8500)); - - mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500, - ARRAY_SIZE(mop500_i2c0_devices_u8500)); - -} diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c deleted file mode 100644 index 1f47d962e3a..00000000000 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2 - */ - -#define pr_fmt(fmt) "mop500-uib: " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/i2c.h> - -#include <mach/hardware.h> -#include "board-mop500.h" - -enum mop500_uib { - STUIB, - U8500UIB, -}; - -struct uib { - const char *name; - const char *option; - void (*init)(void); -}; - -static struct uib __initdata mop500_uibs[] = { - [STUIB] = { - .name = "ST-UIB", - .option = "stuib", - .init = mop500_stuib_init, - }, - [U8500UIB] = { - .name = "U8500-UIB", - .option = "u8500uib", - .init = mop500_u8500uib_init, - }, -}; - -static struct uib *mop500_uib; - -static int __init mop500_uib_setup(char *str) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) { - struct uib *uib = &mop500_uibs[i]; - - if (!strcmp(str, uib->option)) { - mop500_uib = uib; - break; - } - } - - if (i == ARRAY_SIZE(mop500_uibs)) - pr_err("invalid uib= option (%s)\n", str); - - return 1; -} -__setup("uib=", mop500_uib_setup); - -/* - * The UIBs are detected after the I2C host controllers are registered, so - * i2c_register_board_info() can't be used. - */ -void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, - unsigned n) -{ - struct i2c_adapter *adap; - struct i2c_client *client; - int i; - - adap = i2c_get_adapter(busnum); - if (!adap) { - pr_err("failed to get adapter i2c%d\n", busnum); - return; - } - - for (i = 0; i < n; i++) { - client = i2c_new_device(adap, &info[i]); - if (!client) - pr_err("failed to register %s to i2c%d\n", - info[i].type, busnum); - } - - i2c_put_adapter(adap); -} - -static void __init __mop500_uib_init(struct uib *uib, const char *why) -{ - pr_info("%s (%s)\n", uib->name, why); - uib->init(); -} - -/* - * Detect the UIB attached based on the presence or absence of i2c devices. - */ -int __init mop500_uib_init(void) -{ - struct uib *uib = mop500_uib; - struct i2c_adapter *i2c0; - int ret; - - if (!cpu_is_u8500_family()) - return -ENODEV; - - if (uib) { - __mop500_uib_init(uib, "from uib= boot argument"); - return 0; - } - - i2c0 = i2c_get_adapter(0); - if (!i2c0) { - __mop500_uib_init(&mop500_uibs[STUIB], - "fallback, could not get i2c0"); - return -ENODEV; - } - - /* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */ - ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0, - I2C_SMBUS_QUICK, NULL); - i2c_put_adapter(i2c0); - - if (ret == 0) - uib = &mop500_uibs[U8500UIB]; - else - uib = &mop500_uibs[STUIB]; - - __mop500_uib_init(uib, "detected"); - - return 0; -} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c deleted file mode 100644 index 4fd93f5c49e..00000000000 --- a/arch/arm/mach-ux500/board-mop500.c +++ /dev/null @@ -1,901 +0,0 @@ - -/* - * Copyright (C) 2008-2009 ST-Ericsson - * - * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl022.h> -#include <linux/amba/serial.h> -#include <linux/spi/spi.h> -#include <linux/mfd/abx500/ab8500.h> -#include <linux/regulator/ab8500.h> -#include <linux/mfd/tc3589x.h> -#include <linux/mfd/tps6105x.h> -#include <linux/mfd/abx500/ab8500-gpio.h> -#include <linux/leds-lp5521.h> -#include <linux/input.h> -#include <linux/smsc911x.h> -#include <linux/gpio_keys.h> -#include <linux/delay.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/leds.h> -#include <linux/pinctrl/consumer.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/hardware/gic.h> - -#include <plat/i2c.h> -#include <plat/ste_dma40.h> -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> -#include <mach/irqs.h> -#include <mach/crypto-ux500.h> - -#include "ste-dma40-db8500.h" -#include "devices-db8500.h" -#include "board-mop500.h" -#include "board-mop500-regulators.h" -#include "board-mop500-msp.h" - -static struct gpio_led snowball_led_array[] = { - { - .name = "user_led", - .default_trigger = "none", - .gpio = 142, - }, -}; - -static struct gpio_led_platform_data snowball_led_data = { - .leds = snowball_led_array, - .num_leds = ARRAY_SIZE(snowball_led_array), -}; - -static struct platform_device snowball_led_dev = { - .name = "leds-gpio", - .dev = { - .platform_data = &snowball_led_data, - }, -}; - -static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { - .gpio_base = MOP500_AB8500_PIN_GPIO(1), - .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, - /* config_reg is the initial configuration of ab8500 pins. - * The pins can be configured as GPIO or alt functions based - * on value present in GpioSel1 to GpioSel6 and AlternatFunction - * register. This is the array of 7 configuration settings. - * One has to compile time decide these settings. Below is the - * explanation of these setting - * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO - * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO - * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO - * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO - * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO - * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO - * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured - * as GPIO then this register selectes the alternate fucntions - */ - .config_reg = {0x00, 0x1E, 0x80, 0x01, - 0x7A, 0x00, 0x00}, -}; - -static struct gpio_keys_button snowball_key_array[] = { - { - .gpio = 32, - .type = EV_KEY, - .code = KEY_1, - .desc = "userpb", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 151, - .type = EV_KEY, - .code = KEY_2, - .desc = "extkb1", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 152, - .type = EV_KEY, - .code = KEY_3, - .desc = "extkb2", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 161, - .type = EV_KEY, - .code = KEY_4, - .desc = "extkb3", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 162, - .type = EV_KEY, - .code = KEY_5, - .desc = "extkb4", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data snowball_key_data = { - .buttons = snowball_key_array, - .nbuttons = ARRAY_SIZE(snowball_key_array), -}; - -static struct platform_device snowball_key_dev = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &snowball_key_data, - } -}; - -static struct smsc911x_platform_config snowball_sbnet_cfg = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .shift = 1, -}; - -static struct resource sbnet_res[] = { - { - .name = "smsc911x-memory", - .start = (0x5000 << 16), - .end = (0x5000 << 16) + 0xffff, - .flags = IORESOURCE_MEM, - }, - { - .start = NOMADIK_GPIO_TO_IRQ(140), - .end = NOMADIK_GPIO_TO_IRQ(140), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device snowball_sbnet_dev = { - .name = "smsc911x", - .num_resources = ARRAY_SIZE(sbnet_res), - .resource = sbnet_res, - .dev = { - .platform_data = &snowball_sbnet_cfg, - }, -}; - -static struct ab8500_platform_data ab8500_platdata = { - .irq_base = MOP500_AB8500_IRQ_BASE, - .regulator_reg_init = ab8500_regulator_reg_init, - .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), - .gpio = &ab8500_gpio_pdata, -}; - -static struct resource ab8500_resources[] = { - [0] = { - .start = IRQ_DB8500_AB8500, - .end = IRQ_DB8500_AB8500, - .flags = IORESOURCE_IRQ - } -}; - -struct platform_device ab8500_device = { - .name = "ab8500-core", - .id = 0, - .dev = { - .platform_data = &ab8500_platdata, - }, - .num_resources = 1, - .resource = ab8500_resources, -}; - -/* - * TPS61052 - */ - -static struct tps6105x_platform_data mop500_tps61052_data = { - .mode = TPS6105X_MODE_VOLTAGE, - .regulator_data = &tps61052_regulator, -}; - -/* - * TC35892 - */ - -static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) -{ - struct device *parent = NULL; -#if 0 - /* FIXME: Is the sdi actually part of tc3589x? */ - parent = tc3589x->dev; -#endif - mop500_sdi_tc35892_init(parent); -} - -static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { - .gpio_base = MOP500_EGPIO(0), - .setup = mop500_tc35892_init, -}; - -static struct tc3589x_platform_data mop500_tc35892_data = { - .block = TC3589x_BLOCK_GPIO, - .gpio = &mop500_tc35892_gpio_data, - .irq_base = MOP500_EGPIO_IRQ_BASE, -}; - -static struct lp5521_led_config lp5521_pri_led[] = { - [0] = { - .chan_nr = 0, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [1] = { - .chan_nr = 1, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [2] = { - .chan_nr = 2, - .led_current = 0x2f, - .max_current = 0x5f, - }, -}; - -static struct lp5521_platform_data __initdata lp5521_pri_data = { - .label = "lp5521_pri", - .led_config = &lp5521_pri_led[0], - .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, -}; - -static struct lp5521_led_config lp5521_sec_led[] = { - [0] = { - .chan_nr = 0, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [1] = { - .chan_nr = 1, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [2] = { - .chan_nr = 2, - .led_current = 0x2f, - .max_current = 0x5f, - }, -}; - -static struct lp5521_platform_data __initdata lp5521_sec_data = { - .label = "lp5521_sec", - .led_config = &lp5521_sec_led[0], - .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices[] = { - { - I2C_BOARD_INFO("tc3589x", 0x42), - .irq = NOMADIK_GPIO_TO_IRQ(217), - .platform_data = &mop500_tc35892_data, - }, - /* I2C0 devices only available prior to HREFv60 */ - { - I2C_BOARD_INFO("tps61052", 0x33), - .platform_data = &mop500_tps61052_data, - }, -}; - -#define NUM_PRE_V60_I2C0_DEVICES 1 - -static struct i2c_board_info __initdata mop500_i2c2_devices[] = { - { - /* lp5521 LED driver, 1st device */ - I2C_BOARD_INFO("lp5521", 0x33), - .platform_data = &lp5521_pri_data, - }, - { - /* lp5521 LED driver, 2st device */ - I2C_BOARD_INFO("lp5521", 0x34), - .platform_data = &lp5521_sec_data, - }, - { - /* Light sensor Rohm BH1780GLI */ - I2C_BOARD_INFO("bh1780", 0x29), - }, -}; - -#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \ -static struct nmk_i2c_controller u8500_i2c##id##_data = { \ - /* \ - * slave data setup time, which is \ - * 250 ns,100ns,10ns which is 14,6,2 \ - * respectively for a 48 Mhz \ - * i2c clock \ - */ \ - .slsu = _slsu, \ - /* Tx FIFO threshold */ \ - .tft = _tft, \ - /* Rx FIFO threshold */ \ - .rft = _rft, \ - /* std. mode operation */ \ - .clk_freq = clk, \ - /* Slave response timeout(ms) */\ - .timeout = t_out, \ - .sm = _sm, \ -} - -/* - * The board uses 4 i2c controllers, initialize all of - * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 8 and standard - * mode of operation - */ -U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); - -static void __init mop500_i2c_init(struct device *parent) -{ - db8500_add_i2c0(parent, &u8500_i2c0_data); - db8500_add_i2c1(parent, &u8500_i2c1_data); - db8500_add_i2c2(parent, &u8500_i2c2_data); - db8500_add_i2c3(parent, &u8500_i2c3_data); -} - -static struct gpio_keys_button mop500_gpio_keys[] = { - { - .desc = "SFH7741 Proximity Sensor", - .type = EV_SW, - .code = SW_FRONT_PROXIMITY, - .active_low = 0, - .can_disable = 1, - } -}; - -static struct regulator *prox_regulator; -static int mop500_prox_activate(struct device *dev); -static void mop500_prox_deactivate(struct device *dev); - -static struct gpio_keys_platform_data mop500_gpio_keys_data = { - .buttons = mop500_gpio_keys, - .nbuttons = ARRAY_SIZE(mop500_gpio_keys), - .enable = mop500_prox_activate, - .disable = mop500_prox_deactivate, -}; - -static struct platform_device mop500_gpio_keys_device = { - .name = "gpio-keys", - .id = 0, - .dev = { - .platform_data = &mop500_gpio_keys_data, - }, -}; - -static int mop500_prox_activate(struct device *dev) -{ - prox_regulator = regulator_get(&mop500_gpio_keys_device.dev, - "vcc"); - if (IS_ERR(prox_regulator)) { - dev_err(&mop500_gpio_keys_device.dev, - "no regulator\n"); - return PTR_ERR(prox_regulator); - } - regulator_enable(prox_regulator); - return 0; -} - -static void mop500_prox_deactivate(struct device *dev) -{ - regulator_disable(prox_regulator); - regulator_put(prox_regulator); -} - -static struct cryp_platform_data u8500_cryp1_platform_data = { - .mem_to_engine = { - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV48_CAC1_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, - .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - }, - .engine_to_mem = { - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV48_CAC1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, - .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - } -}; - -static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV50_HAC1_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, - .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_16, - .dst_info.psize = STEDMA40_PSIZE_LOG_16, -}; - -static struct hash_platform_data u8500_hash1_platform_data = { - .mem_to_engine = &u8500_hash_dma_cfg_tx, - .dma_filter = stedma40_filter, -}; - -/* add any platform devices here - TODO */ -static struct platform_device *mop500_platform_devs[] __initdata = { - &mop500_gpio_keys_device, - &ab8500_device, -}; - -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV8_SSP0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; - -static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; -#endif - -static struct pl022_ssp_controller ssp0_plat = { - .bus_id = 0, -#ifdef CONFIG_STE_DMA40 - .enable_dma = 1, - .dma_filter = stedma40_filter, - .dma_rx_param = &ssp0_dma_cfg_rx, - .dma_tx_param = &ssp0_dma_cfg_tx, -#else - .enable_dma = 0, -#endif - /* on this platform, gpio 31,142,144,214 & - * 224 are connected as chip selects - */ - .num_chipselect = 5, -}; - -static void __init mop500_spi_init(struct device *parent) -{ - db8500_add_ssp0(parent, &ssp0_plat); -} - -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg uart0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV13_UART0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; - -static struct stedma40_chan_cfg uart0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV13_UART0_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; - -static struct stedma40_chan_cfg uart1_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV12_UART1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; - -static struct stedma40_chan_cfg uart1_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV12_UART1_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; - -static struct stedma40_chan_cfg uart2_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV11_UART2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; - -static struct stedma40_chan_cfg uart2_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV11_UART2_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, -}; -#endif - -#define PRCC_K_SOFTRST_SET 0x18 -#define PRCC_K_SOFTRST_CLEAR 0x1C -static void ux500_uart0_reset(void) -{ - void __iomem *prcc_rst_set, *prcc_rst_clr; - - prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_SET); - prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_CLEAR); - - /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ - writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); - udelay(1); - - /* Release soft reset PRCC_K_SOFTRST_SET */ - writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); - udelay(1); -} - -static struct amba_pl011_data uart0_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart0_dma_cfg_rx, - .dma_tx_param = &uart0_dma_cfg_tx, -#endif - .reset = ux500_uart0_reset, -}; - -static struct amba_pl011_data uart1_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart1_dma_cfg_rx, - .dma_tx_param = &uart1_dma_cfg_tx, -#endif -}; - -static struct amba_pl011_data uart2_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart2_dma_cfg_rx, - .dma_tx_param = &uart2_dma_cfg_tx, -#endif -}; - -static void __init mop500_uart_init(struct device *parent) -{ - db8500_add_uart0(parent, &uart0_plat); - db8500_add_uart1(parent, &uart1_plat); - db8500_add_uart2(parent, &uart2_plat); -} - -static void __init u8500_cryp1_hash1_init(struct device *parent) -{ - db8500_add_cryp1(parent, &u8500_cryp1_platform_data); - db8500_add_hash1(parent, &u8500_hash1_platform_data); -} - -static struct platform_device *snowball_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, - &snowball_sbnet_dev, - &ab8500_device, -}; - -static void __init mop500_init_machine(void) -{ - struct device *parent = NULL; - int i2c0_devs; - int i; - - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - - mop500_pinmaps_init(); - parent = u8500_init_devices(); - - /* FIXME: parent of ab8500 should be prcmu */ - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_i2c_init(parent); - mop500_sdi_init(parent); - mop500_spi_init(parent); - mop500_msp_init(parent); - mop500_uart_init(parent); - - u8500_cryp1_hash1_init(parent); - - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); - - mop500_uib_init(); -} - -static void __init snowball_init_machine(void) -{ - struct device *parent = NULL; - int i; - - snowball_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) - snowball_platform_devs[i]->dev.parent = parent; - - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); - - mop500_i2c_init(parent); - snowball_sdi_init(parent); - mop500_spi_init(parent); - mop500_msp_init(parent); - mop500_uart_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -static void __init hrefv60_init_machine(void) -{ - struct device *parent = NULL; - int i2c0_devs; - int i; - - /* - * The HREFv60 board removed a GPIO expander and routed - * all these GPIO pins to the internal GPIO controller - * instead. - */ - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - - hrefv60_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_i2c_init(parent); - hrefv60_sdi_init(parent); - mop500_spi_init(parent); - mop500_msp_init(parent); - mop500_uart_init(parent); - - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; - - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); - - mop500_uib_init(); -} - -MACHINE_START(U8500, "ST-Ericsson MOP500 platform") - /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ - .atag_offset = 0x100, - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = mop500_init_machine, - .init_late = ux500_init_late, -MACHINE_END - -MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") - .atag_offset = 0x100, - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = hrefv60_init_machine, - .init_late = ux500_init_late, -MACHINE_END - -MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") - .atag_offset = 0x100, - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = snowball_init_machine, - .init_late = ux500_init_late, -MACHINE_END - -#ifdef CONFIG_MACH_UX500_DT - -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, -}; - -struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { - /* Requires DMA and call-back bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), - /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), - /* Requires clock name bindings. */ - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), - /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), - {}, -}; - -static const struct of_device_id u8500_local_bus_nodes[] = { - /* only create devices below soc node */ - { .compatible = "stericsson,db8500", }, - { .compatible = "stericsson,db8500-prcmu", }, - { .compatible = "stericsson,db8500-prcmu-regulator", }, - { .compatible = "stericsson,ab8500", }, - { .compatible = "stericsson,ab8500-regulator", }, - { .compatible = "simple-bus"}, - { }, -}; - -static void __init u8500_init_machine(void) -{ - struct device *parent = NULL; - int i2c0_devs; - int i; - - /* Pinmaps must be in place before devices register */ - if (of_machine_is_compatible("st-ericsson,mop500")) - mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) - snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) - hrefv60_pinmaps_init(); - - parent = u8500_of_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) - snowball_platform_devs[i]->dev.parent = parent; - - /* automatically probe child nodes of db8500 device */ - of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); - - if (of_machine_is_compatible("st-ericsson,mop500")) { - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_sdi_init(parent); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - - mop500_uib_init(); - - } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - /* - * Devices to be DT:ed: - * snowball_led_dev = todo - * snowball_key_dev = todo - * snowball_sbnet_dev = done - * ab8500_device = done - */ - platform_add_devices(snowball_of_platform_devs, - ARRAY_SIZE(snowball_of_platform_devs)); - - snowball_sdi_init(parent); - } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { - /* - * The HREFv60 board removed a GPIO expander and routed - * all these GPIO pins to the internal GPIO controller - * instead. - */ - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - hrefv60_sdi_init(parent); - - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; - - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - - mop500_uib_init(); - } - mop500_i2c_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -static const char * u8500_dt_board_compat[] = { - "calaosystems,snowball-a9500", - "st-ericsson,hrefv60+", - "st-ericsson,u8500", - "st-ericsson,mop500", - NULL, -}; - - -DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)") - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = u8500_init_machine, - .init_late = ux500_init_late, - .dt_compat = u8500_dt_board_compat, -MACHINE_END -#endif diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 2f87b25a908..7c7b0adca58 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,93 +7,11 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H -/* For NOMADIK_NR_GPIO */ -#include <mach/irqs.h> +#include <linux/platform_data/asoc-ux500-msp.h> -/* Snowball specific GPIO assignments, this board has no GPIO expander */ -#define SNOWBALL_ACCEL_INT1_GPIO 163 -#define SNOWBALL_ACCEL_INT2_GPIO 164 -#define SNOWBALL_MAGNET_DRDY_GPIO 165 -#define SNOWBALL_SDMMC_EN_GPIO 217 -#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 -#define SNOWBALL_SDMMC_CD_GPIO 218 - -/* HREFv60-specific GPIO assignments, this board has no GPIO expander */ -#define HREFV60_SDMMC_1V8_3V_GPIO 5 -#define HREFV60_CAMERA_FLASH_ENABLE 21 -#define HREFV60_MAGNET_DRDY_GPIO 32 -#define HREFV60_DISP1_RST_GPIO 65 -#define HREFV60_DISP2_RST_GPIO 66 -#define HREFV60_ACCEL_INT1_GPIO 82 -#define HREFV60_ACCEL_INT2_GPIO 83 -#define HREFV60_SDMMC_CD_GPIO 95 -#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140 -#define HREFV60_TOUCH_RST_GPIO 143 -#define HREFV60_HAL_SW_GPIO 145 -#define HREFV60_SDMMC_EN_GPIO 169 -#define HREFV60_MMIO_XENON_CHARGE 170 -#define HREFV60_PROX_SENSE_GPIO 217 - -/* MOP500 generic GPIOs */ -#define CAMERA_FLASH_INT_PIN 7 -#define CYPRESS_TOUCH_INT_PIN 84 -#define XSHUTDOWN_PRIMARY_SENSOR 141 -#define XSHUTDOWN_SECONDARY_SENSOR 142 -#define CYPRESS_TOUCH_RST_GPIO 143 -#define MOP500_HDMI_RST_GPIO 196 -#define CYPRESS_SLAVE_SELECT_GPIO 216 - -/* GPIOs on the TC35892 expander */ -#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x)) -#define GPIO_MAGNET_DRDY MOP500_EGPIO(1) -#define GPIO_SDMMC_CD MOP500_EGPIO(3) -#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4) -#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5) -#define GPIO_PROX_SENSOR MOP500_EGPIO(7) -#define GPIO_HAL_SENSOR MOP500_EGPIO(8) -#define GPIO_ACCEL_INT1 MOP500_EGPIO(10) -#define GPIO_ACCEL_INT2 MOP500_EGPIO(11) -#define GPIO_BU21013_CS MOP500_EGPIO(13) -#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14) -#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15) -#define GPIO_SDMMC_EN MOP500_EGPIO(17) -#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) -#define MOP500_EGPIO_END MOP500_EGPIO(24) - -/* - * GPIOs on the AB8500 mixed-signals circuit - * Notice that we subtract 1 from the number passed into the macro, this is - * because the AB8500 GPIO pins are enumbered starting from 1, so the value in - * parens matches the GPIO pin number in the data sheet. - */ -#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1) -/*Snowball AB8500 GPIO */ -#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */ -#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */ -#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */ -#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */ -#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */ -#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */ -#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */ - -struct device; -struct i2c_board_info; - -extern void mop500_sdi_init(struct device *parent); -extern void snowball_sdi_init(struct device *parent); -extern void hrefv60_sdi_init(struct device *parent); -extern void mop500_sdi_tc35892_init(struct device *parent); -void __init mop500_u8500uib_init(void); -void __init mop500_stuib_init(void); -void __init mop500_pinmaps_init(void); -void __init snowball_pinmaps_init(void); -void __init hrefv60_pinmaps_init(void); - -int __init mop500_uib_init(void); -void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, - unsigned n); - -/* TODO: Once all pieces are DT:ed, remove completely. */ -struct device * __init u8500_of_init_devices(void); +extern struct msp_i2s_platform_data msp0_platform_data; +extern struct msp_i2s_platform_data msp1_platform_data; +extern struct msp_i2s_platform_data msp2_platform_data; +extern struct msp_i2s_platform_data msp3_platform_data; #endif diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index dc12394295d..842ebedbdd1 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -9,8 +9,9 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/hardware.h> -#include <mach/id.h> + +#include "db8500-regs.h" +#include "id.h" static void __iomem *l2x0_base; @@ -34,39 +35,31 @@ static int __init ux500_l2x0_unlock(void) return 0; } -static int __init ux500_l2x0_init(void) +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) { - u32 aux_val = 0x3e000000; + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} - if (cpu_is_u8500_family()) +static int __init ux500_l2x0_init(void) +{ + if (cpu_is_u8500_family() || cpu_is_ux540_family()) l2x0_base = __io_address(U8500_L2CC_BASE); else - ux500_unknown_soc(); + /* Non-Ux500 platform */ + return -ENODEV; /* Unlock before init */ ux500_l2x0_unlock(); - /* DB9540's L2 has 128KB way size */ - if (cpu_is_u9540()) - /* 128KB way size */ - aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); - else - /* 64KB way size */ - aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + outer_cache.write_sec = ux500_l2c310_write_sec; - /* 64KB way size, 8 way associativity, force WA */ if (of_have_populated_dt()) - l2x0_of_init(aux_val, 0xc0000fff); + l2x0_of_init(0, ~0); else - l2x0_init(l2x0_base, aux_val, 0xc0000fff); - - /* - * We can't disable l2 as we are in non secure mode, currently - * this seems be called only during kexec path. So let's - * override outer.disable with nasty assignment until we have - * some SMI service available. - */ - outer_cache.disable = NULL; + l2x0_init(l2x0_base, 0, ~0); return 0; } diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c deleted file mode 100644 index 8d73b066a18..00000000000 --- a/arch/arm/mach-ux500/clock.c +++ /dev/null @@ -1,715 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * Copyright (C) 2009 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/cpufreq.h> - -#include <plat/mtu.h> -#include <mach/hardware.h> -#include "clock.h" - -#ifdef CONFIG_DEBUG_FS -#include <linux/debugfs.h> -#include <linux/uaccess.h> /* for copy_from_user */ -static LIST_HEAD(clk_list); -#endif - -#define PRCC_PCKEN 0x00 -#define PRCC_PCKDIS 0x04 -#define PRCC_KCKEN 0x08 -#define PRCC_KCKDIS 0x0C - -#define PRCM_YYCLKEN0_MGT_SET 0x510 -#define PRCM_YYCLKEN1_MGT_SET 0x514 -#define PRCM_YYCLKEN0_MGT_CLR 0x518 -#define PRCM_YYCLKEN1_MGT_CLR 0x51C -#define PRCM_YYCLKEN0_MGT_VAL 0x520 -#define PRCM_YYCLKEN1_MGT_VAL 0x524 - -#define PRCM_SVAMMDSPCLK_MGT 0x008 -#define PRCM_SIAMMDSPCLK_MGT 0x00C -#define PRCM_SGACLK_MGT 0x014 -#define PRCM_UARTCLK_MGT 0x018 -#define PRCM_MSP02CLK_MGT 0x01C -#define PRCM_MSP1CLK_MGT 0x288 -#define PRCM_I2CCLK_MGT 0x020 -#define PRCM_SDMMCCLK_MGT 0x024 -#define PRCM_SLIMCLK_MGT 0x028 -#define PRCM_PER1CLK_MGT 0x02C -#define PRCM_PER2CLK_MGT 0x030 -#define PRCM_PER3CLK_MGT 0x034 -#define PRCM_PER5CLK_MGT 0x038 -#define PRCM_PER6CLK_MGT 0x03C -#define PRCM_PER7CLK_MGT 0x040 -#define PRCM_LCDCLK_MGT 0x044 -#define PRCM_BMLCLK_MGT 0x04C -#define PRCM_HSITXCLK_MGT 0x050 -#define PRCM_HSIRXCLK_MGT 0x054 -#define PRCM_HDMICLK_MGT 0x058 -#define PRCM_APEATCLK_MGT 0x05C -#define PRCM_APETRACECLK_MGT 0x060 -#define PRCM_MCDECLK_MGT 0x064 -#define PRCM_IPI2CCLK_MGT 0x068 -#define PRCM_DSIALTCLK_MGT 0x06C -#define PRCM_DMACLK_MGT 0x074 -#define PRCM_B2R2CLK_MGT 0x078 -#define PRCM_TVCLK_MGT 0x07C -#define PRCM_TCR 0x1C8 -#define PRCM_TCR_STOPPED (1 << 16) -#define PRCM_TCR_DOZE_MODE (1 << 17) -#define PRCM_UNIPROCLK_MGT 0x278 -#define PRCM_SSPCLK_MGT 0x280 -#define PRCM_RNGCLK_MGT 0x284 -#define PRCM_UICCCLK_MGT 0x27C - -#define PRCM_MGT_ENABLE (1 << 8) - -static DEFINE_SPINLOCK(clocks_lock); - -static void __clk_enable(struct clk *clk) -{ - if (clk->enabled++ == 0) { - if (clk->parent_cluster) - __clk_enable(clk->parent_cluster); - - if (clk->parent_periph) - __clk_enable(clk->parent_periph); - - if (clk->ops && clk->ops->enable) - clk->ops->enable(clk); - } -} - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - __clk_enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -static void __clk_disable(struct clk *clk) -{ - if (--clk->enabled == 0) { - if (clk->ops && clk->ops->disable) - clk->ops->disable(clk); - - if (clk->parent_periph) - __clk_disable(clk->parent_periph); - - if (clk->parent_cluster) - __clk_disable(clk->parent_cluster); - } -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - WARN_ON(!clk->enabled); - - spin_lock_irqsave(&clocks_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/* - * The MTU has a separate, rather complex muxing setup - * with alternative parents (peripheral cluster or - * ULP or fixed 32768 Hz) depending on settings - */ -static unsigned long clk_mtu_get_rate(struct clk *clk) -{ - void __iomem *addr; - u32 tcr; - int mtu = (int) clk->data; - /* - * One of these is selected eventually - * TODO: Replace the constant with a reference - * to the ULP source once this is modeled. - */ - unsigned long clk32k = 32768; - unsigned long mturate; - unsigned long retclk; - - if (cpu_is_u8500_family()) - addr = __io_address(U8500_PRCMU_BASE); - else - ux500_unknown_soc(); - - /* - * On a startup, always conifgure the TCR to the doze mode; - * bootloaders do it for us. Do this in the kernel too. - */ - writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR); - - tcr = readl(addr + PRCM_TCR); - - /* Get the rate from the parent as a default */ - if (clk->parent_periph) - mturate = clk_get_rate(clk->parent_periph); - else if (clk->parent_cluster) - mturate = clk_get_rate(clk->parent_cluster); - else - /* We need to be connected SOMEWHERE */ - BUG(); - - /* Return the clock selected for this MTU */ - if (tcr & (1 << mtu)) - retclk = clk32k; - else - retclk = mturate; - - pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk); - return retclk; -} - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long rate; - - /* - * If there is a custom getrate callback for this clock, - * it will take precedence. - */ - if (clk->get_rate) - return clk->get_rate(clk); - - if (clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - rate = clk->rate; - if (!rate) { - if (clk->parent_periph) - rate = clk_get_rate(clk->parent_periph); - else if (clk->parent_cluster) - rate = clk_get_rate(clk->parent_cluster); - } - - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - /*TODO*/ - return rate; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - /*TODO*/ - return -ENOSYS; -} -EXPORT_SYMBOL(clk_set_parent); - -static void clk_prcmu_enable(struct clk *clk) -{ - void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) - + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off; - - writel(1 << clk->prcmu_cg_bit, cg_set_reg); -} - -static void clk_prcmu_disable(struct clk *clk) -{ - void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE) - + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off; - - writel(1 << clk->prcmu_cg_bit, cg_clr_reg); -} - -static struct clkops clk_prcmu_ops = { - .enable = clk_prcmu_enable, - .disable = clk_prcmu_disable, -}; - -static unsigned int clkrst_base[] = { - [1] = U8500_CLKRST1_BASE, - [2] = U8500_CLKRST2_BASE, - [3] = U8500_CLKRST3_BASE, - [5] = U8500_CLKRST5_BASE, - [6] = U8500_CLKRST6_BASE, -}; - -static void clk_prcc_enable(struct clk *clk) -{ - void __iomem *addr = __io_address(clkrst_base[clk->cluster]); - - if (clk->prcc_kernel != -1) - writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN); - - if (clk->prcc_bus != -1) - writel(1 << clk->prcc_bus, addr + PRCC_PCKEN); -} - -static void clk_prcc_disable(struct clk *clk) -{ - void __iomem *addr = __io_address(clkrst_base[clk->cluster]); - - if (clk->prcc_bus != -1) - writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS); - - if (clk->prcc_kernel != -1) - writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS); -} - -static struct clkops clk_prcc_ops = { - .enable = clk_prcc_enable, - .disable = clk_prcc_disable, -}; - -static struct clk clk_32khz = { - .name = "clk_32khz", - .rate = 32000, -}; - -/* - * PRCMU level clock gating - */ - -/* Bank 0 */ -static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK); -static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK); -static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK); -static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); -static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); -static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ -static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); -static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000); -static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); -static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); -static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); -static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK); -static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK); -static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000); -static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK); -static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK); -static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK); -static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK); -static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK); -static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK); -static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK); -static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK); -static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK); -static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */ -static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK); -static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK); -static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK); -static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */ -static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */ - -/* Bank 1 */ -static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */ -static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ - -/* - * PRCC level clock gating - * Format: per#, clk, PCKEN bit, KCKEN bit, parent - */ - -/* Peripheral Cluster #1 */ -static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk); -static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); -static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); -static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); -static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL); -static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); -static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk); -static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); -static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); -static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); -static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); - -/* Peripheral Cluster #2 */ -static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL); -static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL); -static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL); -static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL); -static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk); -static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL); -static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL); -static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL); -static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk); - -/* Peripheral Cluster #3 */ -static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); -static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); -static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); -static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk); -static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk); -static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); - -/* Peripheral Cluster #4 is in the always on domain */ - -/* Peripheral Cluster #5 */ -static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); -static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL); - -/* Peripheral Cluster #6 */ - -/* MTU ID in data */ -static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1); -static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0); -static DEFINE_PRCC_CLK(6, cfgreg, 7, 7, NULL); -static DEFINE_PRCC_CLK(6, hash1, 6, -1, NULL); -static DEFINE_PRCC_CLK(6, unipro, 5, 1, &clk_uniproclk); -static DEFINE_PRCC_CLK(6, pka, 4, -1, NULL); -static DEFINE_PRCC_CLK(6, hash0, 3, -1, NULL); -static DEFINE_PRCC_CLK(6, cryp0, 2, -1, NULL); -static DEFINE_PRCC_CLK(6, cryp1, 1, -1, NULL); -static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk); - -static struct clk clk_dummy_apb_pclk = { - .name = "apb_pclk", -}; - -static struct clk_lookup u8500_clks[] = { - CLK(dummy_apb_pclk, NULL, "apb_pclk"), - - /* Peripheral Cluster #1 */ - CLK(gpio0, "gpio.0", NULL), - CLK(gpio0, "gpio.1", NULL), - CLK(slimbus0, "slimbus0", NULL), - CLK(i2c2, "nmk-i2c.2", NULL), - CLK(sdi0, "sdi0", NULL), - CLK(msp0, "ux500-msp-i2s.0", NULL), - CLK(i2c1, "nmk-i2c.1", NULL), - CLK(uart1, "uart1", NULL), - CLK(uart0, "uart0", NULL), - - /* Peripheral Cluster #3 */ - CLK(gpio2, "gpio.2", NULL), - CLK(gpio2, "gpio.3", NULL), - CLK(gpio2, "gpio.4", NULL), - CLK(gpio2, "gpio.5", NULL), - CLK(sdi5, "sdi5", NULL), - CLK(uart2, "uart2", NULL), - CLK(ske, "ske", NULL), - CLK(ske, "nmk-ske-keypad", NULL), - CLK(sdi2, "sdi2", NULL), - CLK(i2c0, "nmk-i2c.0", NULL), - CLK(fsmc, "fsmc", NULL), - - /* Peripheral Cluster #5 */ - CLK(gpio3, "gpio.8", NULL), - - /* Peripheral Cluster #6 */ - CLK(hash1, "hash1", NULL), - CLK(pka, "pka", NULL), - CLK(hash0, "hash0", NULL), - CLK(cryp0, "cryp0", NULL), - CLK(cryp1, "cryp1", NULL), - - /* PRCMU level clock gating */ - - /* Bank 0 */ - CLK(svaclk, "sva", NULL), - CLK(siaclk, "sia", NULL), - CLK(sgaclk, "sga", NULL), - CLK(slimclk, "slim", NULL), - CLK(lcdclk, "lcd", NULL), - CLK(bmlclk, "bml", NULL), - CLK(hsitxclk, "stm-hsi.0", NULL), - CLK(hsirxclk, "stm-hsi.1", NULL), - CLK(hdmiclk, "hdmi", NULL), - CLK(apeatclk, "apeat", NULL), - CLK(apetraceclk, "apetrace", NULL), - CLK(mcdeclk, "mcde", NULL), - CLK(ipi2clk, "ipi2", NULL), - CLK(dmaclk, "dma40.0", NULL), - CLK(b2r2clk, "b2r2", NULL), - CLK(tvclk, "tv", NULL), - - /* Peripheral Cluster #1 */ - CLK(i2c4, "nmk-i2c.4", NULL), - CLK(spi3, "spi3", NULL), - CLK(msp1, "ux500-msp-i2s.1", NULL), - CLK(msp3, "ux500-msp-i2s.3", NULL), - - /* Peripheral Cluster #2 */ - CLK(gpio1, "gpio.6", NULL), - CLK(gpio1, "gpio.7", NULL), - CLK(ssitx, "ssitx", NULL), - CLK(ssirx, "ssirx", NULL), - CLK(spi0, "spi0", NULL), - CLK(sdi3, "sdi3", NULL), - CLK(sdi1, "sdi1", NULL), - CLK(msp2, "ux500-msp-i2s.2", NULL), - CLK(sdi4, "sdi4", NULL), - CLK(pwl, "pwl", NULL), - CLK(spi1, "spi1", NULL), - CLK(spi2, "spi2", NULL), - CLK(i2c3, "nmk-i2c.3", NULL), - - /* Peripheral Cluster #3 */ - CLK(ssp1, "ssp1", NULL), - CLK(ssp0, "ssp0", NULL), - - /* Peripheral Cluster #5 */ - CLK(usb, "musb-ux500.0", "usb"), - - /* Peripheral Cluster #6 */ - CLK(mtu1, "mtu1", NULL), - CLK(mtu0, "mtu0", NULL), - CLK(cfgreg, "cfgreg", NULL), - CLK(hash1, "hash1", NULL), - CLK(unipro, "unipro", NULL), - CLK(rng, "rng", NULL), - - /* PRCMU level clock gating */ - - /* Bank 0 */ - CLK(uniproclk, "uniproclk", NULL), - CLK(dsialtclk, "dsialt", NULL), - - /* Bank 1 */ - CLK(rngclk, "rng", NULL), - CLK(uiccclk, "uicc", NULL), -}; - -#ifdef CONFIG_DEBUG_FS -/* - * debugfs support to trace clock tree hierarchy and attributes with - * powerdebug - */ -static struct dentry *clk_debugfs_root; - -void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num) -{ - while (num--) { - /* Check that the clock has not been already registered */ - if (!(cl->clk->list.prev != cl->clk->list.next)) - list_add_tail(&cl->clk->list, &clk_list); - - cl++; - } -} - -static ssize_t usecount_dbg_read(struct file *file, char __user *buf, - size_t size, loff_t *off) -{ - struct clk *clk = file->f_dentry->d_inode->i_private; - char cusecount[128]; - unsigned int len; - - len = sprintf(cusecount, "%u\n", clk->enabled); - return simple_read_from_buffer(buf, size, off, cusecount, len); -} - -static ssize_t rate_dbg_read(struct file *file, char __user *buf, - size_t size, loff_t *off) -{ - struct clk *clk = file->f_dentry->d_inode->i_private; - char crate[128]; - unsigned int rate; - unsigned int len; - - rate = clk_get_rate(clk); - len = sprintf(crate, "%u\n", rate); - return simple_read_from_buffer(buf, size, off, crate, len); -} - -static const struct file_operations usecount_fops = { - .read = usecount_dbg_read, -}; - -static const struct file_operations set_rate_fops = { - .read = rate_dbg_read, -}; - -static struct dentry *clk_debugfs_register_dir(struct clk *c, - struct dentry *p_dentry) -{ - struct dentry *d, *clk_d; - const char *p = c->name; - - if (!p) - p = "BUG"; - - clk_d = debugfs_create_dir(p, p_dentry); - if (!clk_d) - return NULL; - - d = debugfs_create_file("usecount", S_IRUGO, - clk_d, c, &usecount_fops); - if (!d) - goto err_out; - d = debugfs_create_file("rate", S_IRUGO, - clk_d, c, &set_rate_fops); - if (!d) - goto err_out; - /* - * TODO : not currently available in ux500 - * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags); - * if (!d) - * goto err_out; - */ - - return clk_d; - -err_out: - debugfs_remove_recursive(clk_d); - return NULL; -} - -static int clk_debugfs_register_one(struct clk *c) -{ - struct clk *pa = c->parent_periph; - struct clk *bpa = c->parent_cluster; - - if (!(bpa && !pa)) { - c->dent = clk_debugfs_register_dir(c, - pa ? pa->dent : clk_debugfs_root); - if (!c->dent) - return -ENOMEM; - } - - if (bpa) { - c->dent_bus = clk_debugfs_register_dir(c, - bpa->dent_bus ? bpa->dent_bus : bpa->dent); - if ((!c->dent_bus) && (c->dent)) { - debugfs_remove_recursive(c->dent); - c->dent = NULL; - return -ENOMEM; - } - } - return 0; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent_periph; - struct clk *bpa = c->parent_cluster; - - if (pa && (!pa->dent && !pa->dent_bus)) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (bpa && (!bpa->dent && !bpa->dent_bus)) { - err = clk_debugfs_register(bpa); - if (err) - return err; - } - - if ((!c->dent) && (!c->dent_bus)) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clk_list, list) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} - -#endif /* defined(CONFIG_DEBUG_FS) */ - -unsigned long clk_smp_twd_rate = 500000000; - -unsigned long clk_smp_twd_get_rate(struct clk *clk) -{ - return clk_smp_twd_rate; -} - -static struct clk clk_smp_twd = { - .get_rate = clk_smp_twd_get_rate, - .name = "smp_twd", -}; - -static struct clk_lookup clk_smp_twd_lookup = { - .dev_id = "smp_twd", - .clk = &clk_smp_twd, -}; - -#ifdef CONFIG_CPU_FREQ - -static int clk_twd_cpufreq_transition(struct notifier_block *nb, - unsigned long state, void *data) -{ - struct cpufreq_freqs *f = data; - - if (state == CPUFREQ_PRECHANGE) { - /* Save frequency in simple Hz */ - clk_smp_twd_rate = (f->new * 1000) / 2; - } - - return NOTIFY_OK; -} - -static struct notifier_block clk_twd_cpufreq_nb = { - .notifier_call = clk_twd_cpufreq_transition, -}; - -int clk_init_smp_twd_cpufreq(void) -{ - return cpufreq_register_notifier(&clk_twd_cpufreq_nb, - CPUFREQ_TRANSITION_NOTIFIER); -} - -#endif - -int __init clk_init(void) -{ - clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); - clkdev_add(&clk_smp_twd_lookup); - -#ifdef CONFIG_DEBUG_FS - clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); -#endif - return 0; -} diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h deleted file mode 100644 index 65d27a13f46..00000000000 --- a/arch/arm/mach-ux500/clock.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2010 ST-Ericsson - * Copyright (C) 2009 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/** - * struct clkops - ux500 clock operations - * @enable: function to enable the clock - * @disable: function to disable the clock - * @get_rate: function to get the current clock rate - * - * This structure contains function pointers to functions that will be used to - * control the clock. All of these functions are optional. If get_rate is - * NULL, the rate in the struct clk will be used. - */ -struct clkops { - void (*enable) (struct clk *); - void (*disable) (struct clk *); - unsigned long (*get_rate) (struct clk *); - int (*set_parent)(struct clk *, struct clk *); -}; - -/** - * struct clk - ux500 clock structure - * @ops: pointer to clkops struct used to control this clock - * @name: name, for debugging - * @enabled: refcount. positive if enabled, zero if disabled - * @get_rate: custom callback for getting the clock rate - * @data: custom per-clock data for example for the get_rate - * callback - * @rate: fixed rate for clocks which don't implement - * ops->getrate - * @prcmu_cg_off: address offset of the combined enable/disable register - * (used on u8500v1) - * @prcmu_cg_bit: bit in the combined enable/disable register (used on - * u8500v1) - * @prcmu_cg_mgt: address of the enable/disable register (used on - * u8500ed) - * @cluster: peripheral cluster number - * @prcc_bus: bit for the bus clock in the peripheral's CLKRST - * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST. - * -1 if no kernel clock exists. - * @parent_cluster: pointer to parent's cluster clk struct - * @parent_periph: pointer to parent's peripheral clk struct - * - * Peripherals are organised into clusters, and each cluster has an associated - * bus clock. Some peripherals also have a parent peripheral clock. - * - * In order to enable a clock for a peripheral, we need to enable: - * (1) the parent cluster (bus) clock at the PRCMU level - * (2) the parent peripheral clock (if any) at the PRCMU level - * (3) the peripheral's bus & kernel clock at the PRCC level - * - * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each - * of the cluster and peripheral clocks, and hooking these as the parents of - * the individual peripheral clocks. - * - * (3) is handled by specifying the bits in the PRCC control registers required - * to enable these clocks and modifying them in the ->enable and - * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK). - * - * This structure describes both the PRCMU-level clocks and PRCC-level clocks. - * The prcmu_* fields are only used for the PRCMU clocks, and the cluster, - * prcc, and parent pointers are only used for the PRCC-level clocks. - */ -struct clk { - const struct clkops *ops; - const char *name; - unsigned int enabled; - unsigned long (*get_rate)(struct clk *); - void *data; - - unsigned long rate; - struct list_head list; - - /* These three are only for PRCMU clks */ - - unsigned int prcmu_cg_off; - unsigned int prcmu_cg_bit; - unsigned int prcmu_cg_mgt; - - /* The rest are only for PRCC clks */ - - int cluster; - unsigned int prcc_bus; - unsigned int prcc_kernel; - - struct clk *parent_cluster; - struct clk *parent_periph; -#if defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ - struct dentry *dent_bus; /* For visible tree hierarchy */ -#endif -}; - -#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcmu_ops, \ - .prcmu_cg_off = _cg_off, \ - .prcmu_cg_bit = _cg_bit, \ - .prcmu_cg_mgt = PRCM_##_reg##_MGT \ - } - -#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcmu_ops, \ - .prcmu_cg_off = _cg_off, \ - .prcmu_cg_bit = _cg_bit, \ - .rate = _rate, \ - .prcmu_cg_mgt = PRCM_##_reg##_MGT \ - } - -#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcc_ops, \ - .cluster = _pclust, \ - .prcc_bus = _bus_en, \ - .prcc_kernel = _kernel_en, \ - .parent_cluster = &clk_per##_pclust##clk, \ - .parent_periph = _kernclk \ - } - -#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcc_ops, \ - .cluster = _pclust, \ - .prcc_bus = _bus_en, \ - .prcc_kernel = _kernel_en, \ - .parent_cluster = &clk_per##_pclust##clk, \ - .parent_periph = _kernclk, \ - .get_rate = _callback, \ - .data = (void *) _data \ - } - - -#define CLK(_clk, _devname, _conname) \ - { \ - .clk = &clk_##_clk, \ - .dev_id = _devname, \ - .con_id = _conname, \ - } - -int __init clk_db8500_ed_fixup(void); -int __init clk_init(void); - -#ifdef CONFIG_DEBUG_FS -int clk_debugfs_init(void); -#else -static inline int clk_debugfs_init(void) { return 0; } -#endif - -#ifdef CONFIG_CPU_FREQ -int clk_init_smp_twd_cpufreq(void); -#else -static inline int clk_init_smp_twd_cpufreq(void) { return 0; } -#endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 33275eb4c68..fa308f07fae 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -16,18 +16,32 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/regulator/machine.h> +#include <linux/random.h> -#include <asm/mach/map.h> #include <asm/pmu.h> -#include <plat/gpio-nomadik.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> -#include <mach/usb.h> -#include <mach/db8500-regs.h> +#include <asm/mach/map.h> + +#include "setup.h" + +#include "board-mop500-regulators.h" +#include "board-mop500.h" +#include "db8500-regs.h" +#include "id.h" + +struct ab8500_platform_data ab8500_platdata = { + .regulator = &ab8500_regulator_plat_data, +}; -#include "devices-db8500.h" -#include "ste-dma40-db8500.h" +struct prcmu_pdata db8500_prcmu_pdata = { + .ab_platdata = &ab8500_platdata, + .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, + .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, +}; /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { @@ -79,22 +93,12 @@ void __init u8500_map_io(void) iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc)); - if (cpu_is_u9540()) + if (cpu_is_ux540_family()) iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); else iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); - - _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } -static struct resource db8500_pmu_resources[] = { - [0] = { - .start = IRQ_DB8500_PMU, - .end = IRQ_DB8500_PMU, - .flags = IORESOURCE_IRQ, - }, -}; - /* * The PMU IRQ lines of two cores are wired together into a single interrupt. * Bounce the interrupt to the other core if it's not ours. @@ -115,84 +119,18 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) return ret; } -static struct arm_pmu_platdata db8500_pmu_platdata = { +struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; -static struct platform_device db8500_pmu_device = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .num_resources = ARRAY_SIZE(db8500_pmu_resources), - .resource = db8500_pmu_resources, - .dev.platform_data = &db8500_pmu_platdata, -}; - -static struct platform_device db8500_prcmu_device = { - .name = "db8500-prcmu", -}; - -static struct platform_device *platform_devs[] __initdata = { - &u8500_dma40_device, - &db8500_pmu_device, - &db8500_prcmu_device, -}; - -static struct platform_device *of_platform_devs[] __initdata = { - &u8500_dma40_device, - &db8500_pmu_device, -}; - -static resource_size_t __initdata db8500_gpio_base[] = { - U8500_GPIOBANK0_BASE, - U8500_GPIOBANK1_BASE, - U8500_GPIOBANK2_BASE, - U8500_GPIOBANK3_BASE, - U8500_GPIOBANK4_BASE, - U8500_GPIOBANK5_BASE, - U8500_GPIOBANK6_BASE, - U8500_GPIOBANK7_BASE, - U8500_GPIOBANK8_BASE, -}; - -static void __init db8500_add_gpios(struct device *parent) -{ - struct nmk_gpio_platform_data pdata = { - .supports_sleepmode = true, - }; - - dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), - IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500"); -} - -static int usb_db8500_rx_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_IEP_1_9, - DB8500_DMA_DEV37_USB_OTG_IEP_2_10, - DB8500_DMA_DEV36_USB_OTG_IEP_3_11, - DB8500_DMA_DEV19_USB_OTG_IEP_4_12, - DB8500_DMA_DEV18_USB_OTG_IEP_5_13, - DB8500_DMA_DEV17_USB_OTG_IEP_6_14, - DB8500_DMA_DEV16_USB_OTG_IEP_7_15, - DB8500_DMA_DEV39_USB_OTG_IEP_8 -}; - -static int usb_db8500_tx_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_OEP_1_9, - DB8500_DMA_DEV37_USB_OTG_OEP_2_10, - DB8500_DMA_DEV36_USB_OTG_OEP_3_11, - DB8500_DMA_DEV19_USB_OTG_OEP_4_12, - DB8500_DMA_DEV18_USB_OTG_OEP_5_13, - DB8500_DMA_DEV17_USB_OTG_OEP_6_14, - DB8500_DMA_DEV16_USB_OTG_OEP_7_15, - DB8500_DMA_DEV39_USB_OTG_OEP_8 -}; - static const char *db8500_read_soc_id(void) { void __iomem *uid = __io_address(U8500_BB_UID_BASE); + /* Throw these device-specific numbers into the entropy pool */ + add_device_randomness(uid, 0x14); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", - readl((u32 *)uid+1), + readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); } @@ -204,55 +142,71 @@ static struct device * __init db8500_soc_device_init(void) return ux500_soc_device_init(soc_id); } -/* - * This function is called from the board init - */ -struct device * __init u8500_init_devices(void) -{ - struct device *parent; - int i; - - parent = db8500_soc_device_init(); - - db8500_add_rtc(parent); - db8500_add_gpios(parent); - db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) - platform_devs[i]->dev.parent = parent; +static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + /* Requires call-back bindings. */ + OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), + /* Requires DMA bindings. */ + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), + /* Requires non-DT:able platform data. */ + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), + OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), + OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", + NULL), + {}, +}; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); +static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), + {}, +}; - return parent; -} +static const struct of_device_id u8500_local_bus_nodes[] = { + /* only create devices below soc node */ + { .compatible = "stericsson,db8500", }, + { .compatible = "stericsson,db8500-prcmu", }, + { .compatible = "simple-bus"}, + { }, +}; -/* TODO: Once all pieces are DT:ed, remove completely. */ -struct device * __init u8500_of_init_devices(void) +static void __init u8500_init_machine(void) { - struct device *parent; - int i; - - parent = db8500_soc_device_init(); - - db8500_add_rtc(parent); - db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); + struct device *parent = db8500_soc_device_init(); - for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++) - of_platform_devs[i]->dev.parent = parent; + /* automatically probe child nodes of dbx5x0 devices */ + if (of_machine_is_compatible("st-ericsson,u8540")) + of_platform_populate(NULL, u8500_local_bus_nodes, + u8540_auxdata_lookup, parent); + else + of_platform_populate(NULL, u8500_local_bus_nodes, + u8500_auxdata_lookup, parent); +} - /* - * Devices to be DT:ed: - * u8500_dma40_device = todo - * db8500_pmu_device = todo - * db8500_prcmu_device = done - */ - platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); +static const char * stericsson_dt_platform_compat[] = { + "st-ericsson,u8500", + "st-ericsson,u8540", + "st-ericsson,u9500", + "st-ericsson,u9540", + NULL, +}; - return parent; -} +DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") + .smp = smp_ops(ux500_smp_ops), + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .init_time = ux500_timer_init, + .init_machine = u8500_init_machine, + .init_late = NULL, + .dt_compat = stericsson_dt_platform_compat, + .restart = ux500_restart, +MACHINE_END diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index e2360e7c770..db16b5a04ad 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -8,8 +8,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/clk.h> -#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/dbx500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> #include <linux/err.h> @@ -17,17 +16,27 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/platform_data/clk-ux500.h> +#include <linux/platform_data/arm-ux500-pm.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> +#include "setup.h" -#include "clock.h" +#include "board-mop500.h" +#include "db8500-regs.h" +#include "id.h" -void __iomem *_PRCMU_BASE; +void ux500_restart(enum reboot_mode mode, const char *cmd) +{ + local_irq_disable(); + local_fiq_disable(); + + prcmu_system_reset(0); +} /* * FIXME: Should we set up the GPIO domain here? @@ -41,42 +50,37 @@ void __iomem *_PRCMU_BASE; * This feels fragile because it depends on the gpio device getting probed * _before_ any device uses the gpio interrupts. */ -static const struct of_device_id ux500_dt_irq_match[] = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {}, -}; - void __init ux500_init_irq(void) { - void __iomem *dist_base; - void __iomem *cpu_base; - - if (cpu_is_u8500_family()) { - dist_base = __io_address(U8500_GIC_DIST_BASE); - cpu_base = __io_address(U8500_GIC_CPU_BASE); - } else - ux500_unknown_soc(); - -#ifdef CONFIG_OF - if (of_have_populated_dt()) - of_irq_init(ux500_dt_irq_match); - else -#endif - gic_init(0, 29, dist_base, cpu_base); + gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND; + irqchip_init(); /* * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u8500_family()) - db8500_prcmu_early_init(); - clk_init(); -} - -void __init ux500_init_late(void) -{ - clk_debugfs_init(); - clk_init_smp_twd_cpufreq(); + if (cpu_is_u8500_family()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); + + u8500_of_clk_init(U8500_CLKRST1_BASE, + U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, + U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + } else if (cpu_is_u9540()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); + u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + } else if (cpu_is_u8540()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); + u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + } } static const char * __init ux500_get_machine(void) @@ -137,14 +141,13 @@ struct device * __init ux500_soc_device_init(const char *soc_id) soc_info_populate(soc_dev_attr, soc_id); soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr); return NULL; } parent = soc_device_to_device(soc_dev); - if (!IS_ERR_OR_NULL(parent)) - device_create_file(parent, &ux500_soc_attr); + device_create_file(parent, &ux500_soc_attr); return parent; } diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c deleted file mode 100644 index b54884bd254..00000000000 --- a/arch/arm/mach-ux500/cpuidle.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright (c) 2012 Linaro : Daniel Lezcano <daniel.lezcano@linaro.org> (IBM) - * - * Based on the work of Rickard Andersson <rickard.andersson@stericsson.com> - * and Jonas Aaberg <jonas.aberg@stericsson.com>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/cpuidle.h> -#include <linux/clockchips.h> -#include <linux/spinlock.h> -#include <linux/atomic.h> -#include <linux/smp.h> -#include <linux/mfd/dbx500-prcmu.h> - -#include <asm/cpuidle.h> -#include <asm/proc-fns.h> - -static atomic_t master = ATOMIC_INIT(0); -static DEFINE_SPINLOCK(master_lock); -static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device); - -static inline int ux500_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - int this_cpu = smp_processor_id(); - bool recouple = false; - - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &this_cpu); - - if (atomic_inc_return(&master) == num_online_cpus()) { - - /* With this lock, we prevent the other cpu to exit and enter - * this function again and become the master */ - if (!spin_trylock(&master_lock)) - goto wfi; - - /* decouple the gic from the A9 cores */ - if (prcmu_gic_decouple()) - goto out; - - /* If an error occur, we will have to recouple the gic - * manually */ - recouple = true; - - /* At this state, as the gic is decoupled, if the other - * cpu is in WFI, we have the guarantee it won't be wake - * up, so we can safely go to retention */ - if (!prcmu_is_cpu_in_wfi(this_cpu ? 0 : 1)) - goto out; - - /* The prcmu will be in charge of watching the interrupts - * and wake up the cpus */ - if (prcmu_copy_gic_settings()) - goto out; - - /* Check in the meantime an interrupt did - * not occur on the gic ... */ - if (prcmu_gic_pending_irq()) - goto out; - - /* ... and the prcmu */ - if (prcmu_pending_irq()) - goto out; - - /* Go to the retention state, the prcmu will wait for the - * cpu to go WFI and this is what happens after exiting this - * 'master' critical section */ - if (prcmu_set_power_state(PRCMU_AP_IDLE, true, true)) - goto out; - - /* When we switch to retention, the prcmu is in charge - * of recoupling the gic automatically */ - recouple = false; - - spin_unlock(&master_lock); - } -wfi: - cpu_do_idle(); -out: - atomic_dec(&master); - - if (recouple) { - prcmu_gic_recouple(); - spin_unlock(&master_lock); - } - - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &this_cpu); - - return index; -} - -static struct cpuidle_driver ux500_idle_driver = { - .name = "ux500_idle", - .owner = THIS_MODULE, - .en_core_tk_irqen = 1, - .states = { - ARM_CPUIDLE_WFI_STATE, - { - .enter = ux500_enter_idle, - .exit_latency = 70, - .target_residency = 260, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "ApIdle", - .desc = "ARM Retention", - }, - }, - .safe_state_index = 0, - .state_count = 2, -}; - -/* - * For each cpu, setup the broadcast timer because we will - * need to migrate the timers for the states >= ApIdle. - */ -static void ux500_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} - -int __init ux500_idle_init(void) -{ - int ret, cpu; - struct cpuidle_device *device; - - /* Configure wake up reasons */ - prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | - PRCMU_WAKEUP(ABB)); - - /* - * Configure the timer broadcast for each cpu, that must - * be done from the cpu context, so we use a smp cross - * call with 'on_each_cpu'. - */ - on_each_cpu(ux500_setup_broadcast_timer, NULL, 1); - - ret = cpuidle_register_driver(&ux500_idle_driver); - if (ret) { - printk(KERN_ERR "failed to register ux500 idle driver\n"); - return ret; - } - - for_each_online_cpu(cpu) { - device = &per_cpu(ux500_cpuidle_device, cpu); - device->cpu = cpu; - ret = cpuidle_register_device(device); - if (ret) { - printk(KERN_ERR "Failed to register cpuidle " - "device for cpu%d\n", cpu); - goto out_unregister; - } - } -out: - return ret; - -out_unregister: - for_each_online_cpu(cpu) { - device = &per_cpu(ux500_cpuidle_device, cpu); - cpuidle_unregister_device(device); - } - - cpuidle_unregister_driver(&ux500_idle_driver); - goto out; -} - -device_initcall(ux500_idle_init); diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h index 1530d493879..27399553c84 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/db8500-regs.h @@ -102,7 +102,6 @@ #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) #define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) -#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) @@ -170,4 +169,32 @@ /* SoC identification number information */ #define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) +/* Offsets to specific addresses in some IP blocks for DMA */ +#define MSP_TX_RX_REG_OFFSET 0 +#define CRYP1_RX_REG_OFFSET 0x10 +#define CRYP1_TX_REG_OFFSET 0x8 +#define HASH1_TX_REG_OFFSET 0x4 + +/* + * Macros to get at IO space when running virtually + * We dont map all the peripherals, let ioremap do + * this for us. We map only very basic peripherals here. + */ +#define U8500_IO_VIRTUAL 0xf0000000 +#define U8500_IO_PHYSICAL 0xa0000000 +/* This is where we map in the ROM to check ASIC IDs */ +#define UX500_VIRT_ROM IOMEM(0xf0000000) + +/* This macro is used in assembly, so no cast */ +#define IO_ADDRESS(x) \ + (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) + +/* typesafe io address */ +#define __io_address(n) IOMEM(IO_ADDRESS(n)) + +/* Used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + #endif diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c deleted file mode 100644 index dfdd4a54668..00000000000 --- a/arch/arm/mach-ux500/devices-common.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/err.h> -#include <linux/irq.h> -#include <linux/slab.h> -#include <linux/platform_device.h> - -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> - -#include "devices-common.h" - -static struct platform_device * -dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq, - struct nmk_gpio_platform_data *pdata) -{ - struct resource resources[] = { - { - .start = addr, - .end = addr + 127, - .flags = IORESOURCE_MEM, - }, - { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return platform_device_register_resndata( - parent, - "gpio", - id, - resources, - ARRAY_SIZE(resources), - pdata, - sizeof(*pdata)); -} - -void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, - int irq, struct nmk_gpio_platform_data *pdata) -{ - int first = 0; - int i; - - for (i = 0; i < num; i++, first += 32, irq++) { - pdata->first_gpio = first; - pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); - pdata->num_gpio = 32; - - dbx500_add_gpio(parent, i, base[i], irq, pdata); - } -} diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h deleted file mode 100644 index 6e470656026..00000000000 --- a/arch/arm/mach-ux500/devices-common.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_COMMON_H -#define __DEVICES_COMMON_H - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/sys_soc.h> -#include <linux/amba/bus.h> -#include <plat/i2c.h> -#include <mach/crypto-ux500.h> - -struct spi_master_cntlr; - -static inline struct amba_device * -dbx500_add_msp_spi(struct device *parent, const char *name, - resource_size_t base, int irq, - struct spi_master_cntlr *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, 0); -} - -static inline struct amba_device * -dbx500_add_spi(struct device *parent, const char *name, resource_size_t base, - int irq, struct spi_master_cntlr *pdata, - u32 periphid) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, periphid); -} - -struct mmci_platform_data; - -static inline struct amba_device * -dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base, - int irq, struct mmci_platform_data *pdata, u32 periphid) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, periphid); -} - -struct amba_pl011_data; - -static inline struct amba_device * -dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, - int irq, struct amba_pl011_data *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); -} - -struct nmk_i2c_controller; - -static inline struct platform_device * -dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, - struct nmk_i2c_controller *data) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "nmk-i2c", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = data, - .size_data = sizeof(*data), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); -} - -static inline struct amba_device * -dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) -{ - return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq, - 0, NULL, 0); -} - -struct cryp_platform_data; - -static inline struct platform_device * -dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq, - struct cryp_platform_data *pdata) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "cryp1", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = pdata, - .size_data = sizeof(*pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); -} - -struct hash_platform_data; - -static inline struct platform_device * -dbx500_add_hash1(struct device *parent, int id, resource_size_t base, - struct hash_platform_data *pdata) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - }; - - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "hash1", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = pdata, - .size_data = sizeof(*pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); -} - -struct nmk_gpio_platform_data; - -void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, - int irq, struct nmk_gpio_platform_data *pdata); - -static inline void -dbx500_add_pinctrl(struct device *parent, const char *name) -{ - struct platform_device_info pdevinfo = { - .parent = parent, - .name = name, - .id = -1, - }; - - platform_device_register_full(&pdevinfo); -} - -#endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c deleted file mode 100644 index 91754a8a0d4..00000000000 --- a/arch/arm/mach-ux500/devices-db8500.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl022.h> - -#include <plat/ste_dma40.h> - -#include <mach/hardware.h> -#include <mach/setup.h> - -#include "ste-dma40-db8500.h" - -static struct resource dma40_resources[] = { - [0] = { - .start = U8500_DMA_BASE, - .end = U8500_DMA_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "base", - }, - [1] = { - .start = U8500_DMA_LCPA_BASE, - .end = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - .name = "lcpa", - }, - [2] = { - .start = IRQ_DB8500_DMA, - .end = IRQ_DB8500_DMA, - .flags = IORESOURCE_IRQ, - } -}; - -/* Default configuration for physcial memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_phy = { - .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_PHY_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_PHY_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; -/* Default configuration for logical memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_log = { - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* - * Mapping between destination event lines and physical device address. - * The event line is tied to a device and therefore the address is constant. - * When the address comes from a primecell it will be configured in runtime - * and we set the address to -1 as a placeholder. - */ -static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { - /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1, - /* PrimeCells - run-time configured */ - [DB8500_DMA_DEV0_SPI0_TX] = -1, - [DB8500_DMA_DEV1_SD_MMC0_TX] = -1, - [DB8500_DMA_DEV2_SD_MMC1_TX] = -1, - [DB8500_DMA_DEV3_SD_MMC2_TX] = -1, - [DB8500_DMA_DEV8_SSP0_TX] = -1, - [DB8500_DMA_DEV9_SSP1_TX] = -1, - [DB8500_DMA_DEV11_UART2_TX] = -1, - [DB8500_DMA_DEV12_UART1_TX] = -1, - [DB8500_DMA_DEV13_UART0_TX] = -1, - [DB8500_DMA_DEV28_SD_MM2_TX] = -1, - [DB8500_DMA_DEV29_SD_MM0_TX] = -1, - [DB8500_DMA_DEV32_SD_MM1_TX] = -1, - [DB8500_DMA_DEV33_SPI2_TX] = -1, - [DB8500_DMA_DEV35_SPI1_TX] = -1, - [DB8500_DMA_DEV40_SPI3_TX] = -1, - [DB8500_DMA_DEV41_SD_MM3_TX] = -1, - [DB8500_DMA_DEV42_SD_MM4_TX] = -1, - [DB8500_DMA_DEV43_SD_MM5_TX] = -1, - [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET, - [DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET, -}; - -/* Mapping between source event lines and physical device address */ -static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { - /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1, - /* PrimeCells */ - [DB8500_DMA_DEV0_SPI0_RX] = -1, - [DB8500_DMA_DEV1_SD_MMC0_RX] = -1, - [DB8500_DMA_DEV2_SD_MMC1_RX] = -1, - [DB8500_DMA_DEV3_SD_MMC2_RX] = -1, - [DB8500_DMA_DEV8_SSP0_RX] = -1, - [DB8500_DMA_DEV9_SSP1_RX] = -1, - [DB8500_DMA_DEV11_UART2_RX] = -1, - [DB8500_DMA_DEV12_UART1_RX] = -1, - [DB8500_DMA_DEV13_UART0_RX] = -1, - [DB8500_DMA_DEV28_SD_MM2_RX] = -1, - [DB8500_DMA_DEV29_SD_MM0_RX] = -1, - [DB8500_DMA_DEV32_SD_MM1_RX] = -1, - [DB8500_DMA_DEV33_SPI2_RX] = -1, - [DB8500_DMA_DEV35_SPI1_RX] = -1, - [DB8500_DMA_DEV40_SPI3_RX] = -1, - [DB8500_DMA_DEV41_SD_MM3_RX] = -1, - [DB8500_DMA_DEV42_SD_MM4_RX] = -1, - [DB8500_DMA_DEV43_SD_MM5_RX] = -1, - [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, -}; - -/* Reserved event lines for memcpy only */ -static int dma40_memcpy_event[] = { - DB8500_DMA_MEMCPY_TX_0, - DB8500_DMA_MEMCPY_TX_1, - DB8500_DMA_MEMCPY_TX_2, - DB8500_DMA_MEMCPY_TX_3, - DB8500_DMA_MEMCPY_TX_4, - DB8500_DMA_MEMCPY_TX_5, -}; - -static struct stedma40_platform_data dma40_plat_data = { - .dev_len = DB8500_DMA_NR_DEV, - .dev_rx = dma40_rx_map, - .dev_tx = dma40_tx_map, - .memcpy = dma40_memcpy_event, - .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), - .memcpy_conf_phy = &dma40_memcpy_conf_phy, - .memcpy_conf_log = &dma40_memcpy_conf_log, - .disabled_channels = {-1}, -}; - -struct platform_device u8500_dma40_device = { - .dev = { - .platform_data = &dma40_plat_data, - }, - .name = "dma40", - .id = 0, - .num_resources = ARRAY_SIZE(dma40_resources), - .resource = dma40_resources -}; - -struct resource keypad_resources[] = { - [0] = { - .start = U8500_SKE_BASE, - .end = U8500_SKE_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DB8500_KB, - .end = IRQ_DB8500_KB, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device u8500_ske_keypad_device = { - .name = "nmk-ske-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(keypad_resources), - .resource = keypad_resources, -}; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h deleted file mode 100644 index 3c8010f4fb3..00000000000 --- a/arch/arm/mach-ux500/devices-db8500.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_DB8500_H -#define __DEVICES_DB8500_H - -#include "devices-common.h" - -struct ske_keypad_platform_data; -struct pl022_ssp_controller; - -static inline struct platform_device * -db8500_add_ske_keypad(struct device *parent, - struct ske_keypad_platform_data *pdata, - size_t size) -{ - struct resource resources[] = { - DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K), - DEFINE_RES_IRQ(IRQ_DB8500_KB), - }; - - return platform_device_register_resndata(parent, "nmk-ske-keypad", -1, - resources, 2, pdata, size); -} - -static inline struct amba_device * -db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, - int irq, struct pl022_ssp_controller *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); -} - -#define db8500_add_i2c0(parent, pdata) \ - dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) -#define db8500_add_i2c1(parent, pdata) \ - dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) -#define db8500_add_i2c2(parent, pdata) \ - dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) -#define db8500_add_i2c3(parent, pdata) \ - dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) -#define db8500_add_i2c4(parent, pdata) \ - dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) - -#define db8500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ - IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \ - IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \ - IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \ - IRQ_DB8500_MSP1, pdata) - -#define db8500_add_rtc(parent) \ - dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC); - -#define db8500_add_usb(parent, rx_cfg, tx_cfg) \ - ux500_add_usb(parent, U8500_USBOTG_BASE, \ - IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) - -#define db8500_add_sdi0(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \ - IRQ_DB8500_SDMMC0, pdata, pid) -#define db8500_add_sdi1(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \ - IRQ_DB8500_SDMMC1, pdata, pid) -#define db8500_add_sdi2(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \ - IRQ_DB8500_SDMMC2, pdata, pid) -#define db8500_add_sdi3(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \ - IRQ_DB8500_SDMMC3, pdata, pid) -#define db8500_add_sdi4(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \ - IRQ_DB8500_SDMMC4, pdata, pid) -#define db8500_add_sdi5(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \ - IRQ_DB8500_SDMMC5, pdata, pid) - -#define db8500_add_ssp0(parent, pdata) \ - db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \ - IRQ_DB8500_SSP0, pdata) -#define db8500_add_ssp1(parent, pdata) \ - db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \ - IRQ_DB8500_SSP1, pdata) - -#define db8500_add_spi0(parent, pdata) \ - dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \ - IRQ_DB8500_SPI0, pdata, 0) -#define db8500_add_spi1(parent, pdata) \ - dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \ - IRQ_DB8500_SPI1, pdata, 0) -#define db8500_add_spi2(parent, pdata) \ - dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \ - IRQ_DB8500_SPI2, pdata, 0) -#define db8500_add_spi3(parent, pdata) \ - dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \ - IRQ_DB8500_SPI3, pdata, 0) - -#define db8500_add_uart0(parent, pdata) \ - dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \ - IRQ_DB8500_UART0, pdata) -#define db8500_add_uart1(parent, pdata) \ - dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \ - IRQ_DB8500_UART1, pdata) -#define db8500_add_uart2(parent, pdata) \ - dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \ - IRQ_DB8500_UART2, pdata) - -#define db8500_add_cryp1(parent, pdata) \ - dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata) -#define db8500_add_hash1(parent, pdata) \ - dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata) -#endif diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c deleted file mode 100644 index ea0a2f92ca7..00000000000 --- a/arch/arm/mach-ux500/devices.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/amba/bus.h> - -#include <mach/hardware.h> -#include <mach/setup.h> - -void __init amba_add_devices(struct amba_device *devs[], int num) -{ - int i; - - for (i = 0; i < num; i++) { - struct amba_device *d = devs[i]; - amba_device_register(d, &iomem_resource); - } -} diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S index 08da5589bcd..9cdea049485 100644 --- a/arch/arm/mach-ux500/headsmp.S +++ b/arch/arm/mach-ux500/headsmp.S @@ -11,8 +11,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * U8500 specific entry point for secondary CPUs. */ diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index c76f0f456f0..2bc00b085e3 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -12,16 +12,18 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> -extern volatile int pen_release; +#include "setup.h" -static inline void platform_do_lowpower(unsigned int cpu) +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void __ref ux500_cpu_die(unsigned int cpu) { - flush_cache_all(); - - /* we put the platform to just WFI */ + /* directly enter low power state, skipping secure registers */ for (;;) { __asm__ __volatile__("dsb\n\t" "wfi\n\t" : : : "memory"); @@ -33,28 +35,3 @@ static inline void platform_do_lowpower(unsigned int cpu) } } } - -int platform_cpu_kill(unsigned int cpu) -{ - return 1; -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void platform_cpu_die(unsigned int cpu) -{ - /* directly enter low power state, skipping secure registers */ - platform_do_lowpower(cpu); -} - -int platform_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index d1579920139..392f2fdb37d 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -14,16 +14,18 @@ #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/setup.h> +#include "setup.h" + +#include "db8500-regs.h" +#include "id.h" struct dbx500_asic_id dbx500_id; -static unsigned int ux500_read_asicid(phys_addr_t addr) +static unsigned int __init ux500_read_asicid(phys_addr_t addr) { phys_addr_t base = addr & ~0xfff; struct map_desc desc = { - .virtual = UX500_VIRT_ROM, + .virtual = (unsigned long)UX500_VIRT_ROM, .pfn = __phys_to_pfn(base), .length = SZ_16K, .type = MT_DEVICE, @@ -35,7 +37,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr) local_flush_tlb_all(); flush_cache_all(); - return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff))); + return readl(UX500_VIRT_ROM + (addr & 0xfff)); } static void ux500_print_soc_info(unsigned int asicid) diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/id.h index c6e2db9e9e5..bcc58a8cccb 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/id.h @@ -41,43 +41,34 @@ static inline bool __attribute_const__ cpu_is_u8500(void) return dbx500_partnumber() == 0x8500; } -static inline bool __attribute_const__ cpu_is_u9540(void) +static inline bool __attribute_const__ cpu_is_u8520(void) { - return dbx500_partnumber() == 0x9540; + return dbx500_partnumber() == 0x8520; } static inline bool cpu_is_u8500_family(void) { - return cpu_is_u8500() || cpu_is_u9540(); -} - -static inline bool __attribute_const__ cpu_is_u5500(void) -{ - return dbx500_partnumber() == 0x5500; + return cpu_is_u8500() || cpu_is_u8520(); } -/* - * 5500 revisions - */ - -static inline bool __attribute_const__ cpu_is_u5500v1(void) +static inline bool __attribute_const__ cpu_is_u9540(void) { - return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0; + return dbx500_partnumber() == 0x9540; } -static inline bool __attribute_const__ cpu_is_u5500v2(void) +static inline bool __attribute_const__ cpu_is_u8540(void) { - return (dbx500_id.revision & 0xf0) == 0xB0; + return dbx500_partnumber() == 0x8540; } -static inline bool __attribute_const__ cpu_is_u5500v20(void) +static inline bool __attribute_const__ cpu_is_u8580(void) { - return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0); + return dbx500_partnumber() == 0x8580; } -static inline bool __attribute_const__ cpu_is_u5500v21(void) +static inline bool cpu_is_ux540_family(void) { - return cpu_is_u5500() && (dbx500_revision() == 0xB1); + return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580(); } /* @@ -119,14 +110,28 @@ static inline bool cpu_is_u8500v21(void) return cpu_is_u8500() && (dbx500_revision() == 0xB1); } +static inline bool cpu_is_u8500v22(void) +{ + return cpu_is_u8500() && (dbx500_revision() == 0xB2); +} + static inline bool cpu_is_u8500v20_or_later(void) { - /* - * U9540 has so much in common with U8500 that is is considered a - * U8500 variant. - */ - return cpu_is_u9540() || - (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); + return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); +} + +/* + * 8540 revisions + */ + +static inline bool __attribute_const__ cpu_is_u8540v10(void) +{ + return cpu_is_u8540() && dbx500_revision() == 0xA0; +} + +static inline bool __attribute_const__ cpu_is_u8580v10(void) +{ + return cpu_is_u8580() && dbx500_revision() == 0xA0; } static inline bool ux500_is_svp(void) diff --git a/arch/arm/mach-ux500/include/mach/crypto-ux500.h b/arch/arm/mach-ux500/include/mach/crypto-ux500.h deleted file mode 100644 index 5b2d0817e26..00000000000 --- a/arch/arm/mach-ux500/include/mach/crypto-ux500.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ -#ifndef _CRYPTO_UX500_H -#define _CRYPTO_UX500_H -#include <linux/dmaengine.h> -#include <plat/ste_dma40.h> - -struct hash_platform_data { - void *mem_to_engine; - bool (*dma_filter)(struct dma_chan *chan, void *filter_param); -}; - -struct cryp_platform_data { - struct stedma40_chan_cfg mem_to_engine; - struct stedma40_chan_cfg engine_to_mem; -}; - -#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S deleted file mode 100644 index 67035223334..00000000000 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <mach/hardware.h> - -#if CONFIG_UX500_DEBUG_UART > 2 -#error Invalid Ux500 debug UART -#endif - -/* - * DEBUG_LL only works if only one SOC is built in. We don't use #else below - * in order to get "__UX500_UART redefined" warnings if more than one SOC is - * built, so that there's some hint during the build that something is wrong. - */ - -#ifdef CONFIG_UX500_SOC_DB8500 -#define __UX500_UART(n) U8500_UART##n##_BASE -#endif - -#ifndef __UX500_UART -#error Unknown SOC -#endif - -#define UX500_UART(n) __UX500_UART(n) -#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_BASE @ no, physical address - ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address - .endm - -#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h deleted file mode 100644 index cbc6f1e4104..00000000000 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __ASM_ARCH_DEVICES_H__ -#define __ASM_ARCH_DEVICES_H__ - -struct platform_device; -struct amba_device; - -extern struct platform_device u8500_gpio_devs[]; - -extern struct amba_device ux500_pl031_device; - -extern struct platform_device ux500_hash1_device; -extern struct platform_device ux500_cryp1_device; - -extern struct platform_device u8500_dma40_device; -extern struct platform_device ux500_ske_keypad_device; - -#endif diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h deleted file mode 100644 index c01ef66537f..00000000000 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h deleted file mode 100644 index 28d16e744bf..00000000000 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * U8500 hardware definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -/* - * Macros to get at IO space when running virtually - * We dont map all the peripherals, let ioremap do - * this for us. We map only very basic peripherals here. - */ -#define U8500_IO_VIRTUAL 0xf0000000 -#define U8500_IO_PHYSICAL 0xa0000000 -/* This is where we map in the ROM to check ASIC IDs */ -#define UX500_VIRT_ROM 0xf0000000 - -/* This macro is used in assembly, so no cast */ -#define IO_ADDRESS(x) \ - (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) - -/* typesafe io address */ -#define __io_address(n) IOMEM(IO_ADDRESS(n)) - -/* Used by some plat-nomadik code */ -#define io_p2v(n) __io_address(n) - -#include <mach/db8500-regs.h> - -#define MSP_TX_RX_REG_OFFSET 0 -#define CRYP1_RX_REG_OFFSET 0x10 -#define CRYP1_TX_REG_OFFSET 0x8 -#define HASH1_TX_REG_OFFSET 0x4 - -#ifndef __ASSEMBLY__ - -#include <mach/id.h> -extern void __iomem *_PRCMU_BASE; - -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - -#endif /* __ASSEMBLY__ */ -#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h deleted file mode 100644 index 7d34c52798b..00000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_BOARD_MOP500_H -#define __MACH_IRQS_BOARD_MOP500_H - -/* Number of AB8500 irqs is taken from header file */ -#include <linux/mfd/abx500/ab8500.h> - -#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START -#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ - + AB8500_MAX_NR_IRQS) - -/* TC35892 */ -#define TC35892_NR_INTERNAL_IRQS 8 -#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x)) -#define TC35892_NR_GPIOS 24 -#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS) - -#define MOP500_EGPIO_NR_IRQS TC35892_NR_IRQS - -#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END -#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \ - + MOP500_EGPIO_NR_IRQS) -/* STMPE1601 irqs */ -#define STMPE_NR_INTERNAL_IRQS 9 -#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) -#define STMPE_NR_GPIOS 24 -#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) - -#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END -#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) - -#define MOP500_STMPE1601_IRQ_END \ - MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) - -/* AB8500 virtual gpio IRQ */ -#define AB8500_VIR_GPIO_NR_IRQS 16 - -#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ - MOP500_STMPE1601_IRQ_END -#define MOP500_AB8500_VIR_GPIO_IRQ_END \ - (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) - -#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END - -#define MOP500_IRQ_END MOP500_NR_IRQS - -/* - * We may have several boards, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_BOARD_START remains the same for either board. - */ -#if MOP500_IRQ_END > IRQ_BOARD_END -#undef IRQ_BOARD_END -#define IRQ_BOARD_END MOP500_IRQ_END -#endif - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h deleted file mode 100644 index 68bc1497460..00000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_DB8500_H -#define __MACH_IRQS_DB8500_H - -#define IRQ_DB8500_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_DB8500_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_DB8500_PMU (IRQ_SHPI_START + 7) -#define IRQ_DB8500_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_DB8500_RTT (IRQ_SHPI_START + 9) -#define IRQ_DB8500_PKA (IRQ_SHPI_START + 10) -#define IRQ_DB8500_UART0 (IRQ_SHPI_START + 11) -#define IRQ_DB8500_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_DB8500_L2CC (IRQ_SHPI_START + 13) -#define IRQ_DB8500_SSP0 (IRQ_SHPI_START + 14) -#define IRQ_DB8500_CRYP1 (IRQ_SHPI_START + 15) -#define IRQ_DB8500_MSP1_RX (IRQ_SHPI_START + 16) -#define IRQ_DB8500_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_DB8500_RTC (IRQ_SHPI_START + 18) -#define IRQ_DB8500_UART1 (IRQ_SHPI_START + 19) -#define IRQ_DB8500_USB_WAKEUP (IRQ_SHPI_START + 20) -#define IRQ_DB8500_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_DB8500_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_DB8500_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DB8500_DMA_SECURE (IRQ_SHPI_START + 24) -#define IRQ_DB8500_DMA (IRQ_SHPI_START + 25) -#define IRQ_DB8500_UART2 (IRQ_SHPI_START + 26) -#define IRQ_DB8500_ICN_PMU1 (IRQ_SHPI_START + 27) -#define IRQ_DB8500_ICN_PMU2 (IRQ_SHPI_START + 28) -#define IRQ_DB8500_HSIR_EXCEP (IRQ_SHPI_START + 29) -#define IRQ_DB8500_MSP0 (IRQ_SHPI_START + 31) -#define IRQ_DB8500_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) -#define IRQ_DB8500_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) -#define IRQ_DB8500_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) -#define IRQ_DB8500_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_DB8500_HSIR_CH4_OVRRUN (IRQ_SHPI_START + 36) -#define IRQ_DB8500_HSIR_CH5_OVRRUN (IRQ_SHPI_START + 37) -#define IRQ_DB8500_HSIR_CH6_OVRRUN (IRQ_SHPI_START + 38) -#define IRQ_DB8500_HSIR_CH7_OVRRUN (IRQ_SHPI_START + 39) -#define IRQ_DB8500_AB8500 (IRQ_SHPI_START + 40) -#define IRQ_DB8500_SDMMC2 (IRQ_SHPI_START + 41) -#define IRQ_DB8500_SIA (IRQ_SHPI_START + 42) -#define IRQ_DB8500_SIA2 (IRQ_SHPI_START + 43) -#define IRQ_DB8500_SVA (IRQ_SHPI_START + 44) -#define IRQ_DB8500_SVA2 (IRQ_SHPI_START + 45) -#define IRQ_DB8500_PRCMU0 (IRQ_SHPI_START + 46) -#define IRQ_DB8500_PRCMU1 (IRQ_SHPI_START + 47) -#define IRQ_DB8500_DISP (IRQ_SHPI_START + 48) -#define IRQ_DB8500_SPI3 (IRQ_SHPI_START + 49) -#define IRQ_DB8500_SDMMC1 (IRQ_SHPI_START + 50) -#define IRQ_DB8500_I2C4 (IRQ_SHPI_START + 51) -#define IRQ_DB8500_SSP1 (IRQ_SHPI_START + 52) -#define IRQ_DB8500_SKE (IRQ_SHPI_START + 53) -#define IRQ_DB8500_KB (IRQ_SHPI_START + 54) -#define IRQ_DB8500_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_DB8500_B2R2 (IRQ_SHPI_START + 56) -#define IRQ_DB8500_CRYP0 (IRQ_SHPI_START + 57) -#define IRQ_DB8500_SDMMC3 (IRQ_SHPI_START + 59) -#define IRQ_DB8500_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_DB8500_HSEM (IRQ_SHPI_START + 61) -#define IRQ_DB8500_MSP1 (IRQ_SHPI_START + 62) -#define IRQ_DB8500_SBAG (IRQ_SHPI_START + 63) -#define IRQ_DB8500_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_DB8500_SRPTIMER (IRQ_SHPI_START + 97) -#define IRQ_DB8500_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_DB8500_SDMMC4 (IRQ_SHPI_START + 99) -#define IRQ_DB8500_SDMMC5 (IRQ_SHPI_START + 100) -#define IRQ_DB8500_HSIRD0 (IRQ_SHPI_START + 104) -#define IRQ_DB8500_HSIRD1 (IRQ_SHPI_START + 105) -#define IRQ_DB8500_HSITD0 (IRQ_SHPI_START + 106) -#define IRQ_DB8500_HSITD1 (IRQ_SHPI_START + 107) -#define IRQ_DB8500_CTI0 (IRQ_SHPI_START + 108) -#define IRQ_DB8500_CTI1 (IRQ_SHPI_START + 109) -#define IRQ_DB8500_ICN_ERR (IRQ_SHPI_START + 110) -#define IRQ_DB8500_MALI_PPMMU (IRQ_SHPI_START + 112) -#define IRQ_DB8500_MALI_PP (IRQ_SHPI_START + 113) -#define IRQ_DB8500_MALI_GPMMU (IRQ_SHPI_START + 114) -#define IRQ_DB8500_MALI_GP (IRQ_SHPI_START + 115) -#define IRQ_DB8500_MALI (IRQ_SHPI_START + 116) -#define IRQ_DB8500_PRCMU_SEM (IRQ_SHPI_START + 118) -#define IRQ_DB8500_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_DB8500_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_DB8500_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_DB8500_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_DB8500_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_DB8500_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_DB8500_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) -#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) - -#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71) -#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66) -#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64) -#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67) -#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65) - -#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83) -#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78) -#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76) -#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79) -#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77) - -#ifdef CONFIG_UX500_SOC_DB8500 - -/* Virtual interrupts corresponding to the PRCMU wakeups. */ -#define IRQ_PRCMU_BASE IRQ_SOC_START -#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) - -#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) -#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) -#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) -#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) -#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) -#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) -#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) -#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) -#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) -#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) -#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) -#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) -#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) -#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) -#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) -#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) -#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) -#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) -#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) -#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) -#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) -#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) -#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) -#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) - -/* - * We may have several SoCs, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_SOC_START remains the same for either SoC. - */ -#if IRQ_SOC_END < IRQ_PRCMU_END -#undef IRQ_SOC_END -#define IRQ_SOC_END IRQ_PRCMU_END -#endif - -#endif /* CONFIG_UX500_SOC_DB8500 */ -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h deleted file mode 100644 index e8928548b6a..00000000000 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 ST-Ericsson. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef ASM_ARCH_IRQS_H -#define ASM_ARCH_IRQS_H - -#include <mach/hardware.h> - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -/* Shared Peripheral Interrupt (SHPI) */ -#define IRQ_SHPI_START 32 - -/* - * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't - * add any other IRQs here, use the irqs-dbx500.h files. - */ -#define IRQ_MTU0 (IRQ_SHPI_START + 4) - -#define DBX500_NR_INTERNAL_IRQS 166 - -/* After chip-specific IRQ numbers we have the GPIO ones */ -#define NOMADIK_NR_GPIO 288 -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) -#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) - -#define IRQ_SOC_START IRQ_GPIO_END -/* This will be overridden by SoC-specific irq headers */ -#define IRQ_SOC_END IRQ_SOC_START - -#include <mach/irqs-db8500.h> - -#define IRQ_BOARD_START IRQ_SOC_END -/* This will be overridden by board-specific irq headers */ -#define IRQ_BOARD_END IRQ_BOARD_START - -#ifdef CONFIG_MACH_MOP500 -#include <mach/irqs-board-mop500.h> -#endif - -#define NR_IRQS IRQ_BOARD_END - -#endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h deleted file mode 100644 index 798be19129e..00000000000 --- a/arch/arm/mach-ux500/include/mach/msp.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __MSP_H -#define __MSP_H - -#include <plat/ste_dma40.h> - -enum msp_i2s_id { - MSP_I2S_0 = 0, - MSP_I2S_1, - MSP_I2S_2, - MSP_I2S_3, -}; - -/* Platform data structure for a MSP I2S-device */ -struct msp_i2s_platform_data { - enum msp_i2s_id id; - struct stedma40_chan_cfg *msp_i2s_dma_rx; - struct stedma40_chan_cfg *msp_i2s_dma_tx; - int (*msp_i2s_init) (void); - int (*msp_i2s_exit) (void); -}; - -#endif diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h deleted file mode 100644 index d0942c17401..00000000000 --- a/arch/arm/mach-ux500/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 110000000 - -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h deleted file mode 100644 index 34775baadae..00000000000 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <linux/io.h> -#include <linux/amba/serial.h> -#include <mach/hardware.h> - -u32 ux500_uart_base; - -static void putc(const char c) -{ - /* Do nothing if the UART is not enabled. */ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - - if (c == '\n') - putc('\r'); - - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5)) - barrier(); - __raw_writeb(c, ux500_uart_base + UART01x_DR); -} - -static void flush(void) -{ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3)) - barrier(); -} - -static inline void arch_decomp_setup(void) -{ - /* Use machine_is_foo() macro if you need to switch base someday */ - ux500_uart_base = U8500_UART2_BASE; -} - -#define arch_decomp_wdog() /* nothing to do here */ - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h deleted file mode 100644 index 4c1cc50a595..00000000000 --- a/arch/arm/mach-ux500/include/mach/usb.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ -#ifndef __ASM_ARCH_USB_H -#define __ASM_ARCH_USB_H - -#include <linux/dmaengine.h> - -#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8 -#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8 - -struct ux500_musb_board_data { - void **dma_rx_param_array; - void **dma_tx_param_array; - u32 num_rx_channels; - u32 num_tx_channels; - bool (*dma_filter)(struct dma_chan *chan, void *filter_param); -}; - -void ux500_add_usb(struct device *parent, resource_size_t base, - int irq, int *dma_rx_cfg, int *dma_tx_cfg); -#endif diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h deleted file mode 100644 index 062c7acf457..00000000000 --- a/arch/arm/mach-ux500/pins-db8500.h +++ /dev/null @@ -1,746 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - */ - -#ifndef __MACH_PINS_DB8500_H -#define __MACH_PINS_DB8500_H - -/* - * TODO: Eventually encode all non-board specific pull up/down configuration - * here. - */ - -#define GPIO0_GPIO PIN_CFG(0, GPIO) -#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) -#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) -#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) - -#define GPIO1_GPIO PIN_CFG(1, GPIO) -#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) -#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) -#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) - -#define GPIO2_GPIO PIN_CFG(2, GPIO) -#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) -#define GPIO2_NONE PIN_CFG(2, ALT_B) -#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) - -#define GPIO3_GPIO PIN_CFG(3, GPIO) -#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) -#define GPIO3_NONE PIN_CFG(3, ALT_B) -#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) - -#define GPIO4_GPIO PIN_CFG(4, GPIO) -#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG(4, ALT_B) -#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) - -#define GPIO5_GPIO PIN_CFG(5, GPIO) -#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG(5, ALT_B) -#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) - -#define GPIO6_GPIO PIN_CFG(6, GPIO) -#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG(6, ALT_B) -#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) - -#define GPIO7_GPIO PIN_CFG(7, GPIO) -#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG(7, ALT_B) -#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) - -#define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG(8, ALT_A) -#define GPIO8_I2C2_SDA PIN_CFG(8, ALT_B) - -#define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG(9, ALT_A) -#define GPIO9_I2C2_SCL PIN_CFG(9, ALT_B) - -#define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG(10, ALT_A) -#define GPIO10_I2C2_SDA PIN_CFG(10, ALT_B) -#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) - -#define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG(11, ALT_A) -#define GPIO11_I2C2_SCL PIN_CFG(11, ALT_B) -#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) - -#define GPIO12_GPIO PIN_CFG(12, GPIO) -#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) -#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) - -#define GPIO13_GPIO PIN_CFG(13, GPIO) -#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) - -#define GPIO14_GPIO PIN_CFG(14, GPIO) -#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) - -#define GPIO15_GPIO PIN_CFG(15, GPIO) -#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) -#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) - -#define GPIO16_GPIO PIN_CFG(16, GPIO) -#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG(16, ALT_B) -#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) - -#define GPIO17_GPIO PIN_CFG(17, GPIO) -#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG(17, ALT_B) -#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) - -#define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG_INPUT(18, ALT_A, PULLUP) -#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) -#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) - -#define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG_INPUT(19, ALT_A, PULLUP) -#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) -#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) - -#define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG_INPUT(20, ALT_A, PULLUP) -#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) -#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) - -#define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG_INPUT(21, ALT_A, PULLUP) -#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) -#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) - -#define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG_INPUT(22, ALT_A, PULLUP) -#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) -#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) - -#define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG_INPUT(23, ALT_A, PULLUP) -#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) -#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) - -#define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG_INPUT(24, ALT_A, PULLUP) -#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) -#define GPIO24_MS_BS PIN_CFG(24, ALT_C) - -#define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG_INPUT(25, ALT_A, PULLUP) -#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) -#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) - -#define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG_INPUT(26, ALT_A, PULLUP) -#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) -#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) - -#define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG_INPUT(27, ALT_A, PULLUP) -#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) -#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) - -#define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG_INPUT(28, ALT_A, PULLUP) -#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) -#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) - -#define GPIO29_GPIO PIN_CFG(29, GPIO) -#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) -#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) -#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) - -#define GPIO30_GPIO PIN_CFG(30, GPIO) -#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) -#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) -#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) - -#define GPIO31_GPIO PIN_CFG(31, GPIO) -#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) -#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) -#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) - -#define GPIO32_GPIO PIN_CFG(32, GPIO) -#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) -#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) -#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) - -#define GPIO33_GPIO PIN_CFG(33, GPIO) -#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) -#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) -#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) - -#define GPIO34_GPIO PIN_CFG(34, GPIO) -#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) -#define GPIO34_NONE PIN_CFG(34, ALT_B) -#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) - -#define GPIO35_GPIO PIN_CFG(35, GPIO) -#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) -#define GPIO35_NONE PIN_CFG(35, ALT_B) -#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) - -#define GPIO36_GPIO PIN_CFG(36, GPIO) -#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) -#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) -#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) - -#define GPIO64_GPIO PIN_CFG(64, GPIO) -#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) -#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) -#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) - -#define GPIO65_GPIO PIN_CFG(65, GPIO) -#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) -#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) -#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) - -#define GPIO66_GPIO PIN_CFG(66, GPIO) -#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) -#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) -#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) - -#define GPIO67_GPIO PIN_CFG(67, GPIO) -#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) -#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) -#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) - -#define GPIO68_GPIO PIN_CFG(68, GPIO) -#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) -#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) -#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) - -#define GPIO69_GPIO PIN_CFG(69, GPIO) -#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) -#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) -#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) - -#define GPIO70_GPIO PIN_CFG(70, GPIO) -#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) -#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) -#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) - -#define GPIO71_GPIO PIN_CFG(71, GPIO) -#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) -#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) -#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) - -#define GPIO72_GPIO PIN_CFG(72, GPIO) -#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) -#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) -#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) - -#define GPIO73_GPIO PIN_CFG(73, GPIO) -#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) -#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) -#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) - -#define GPIO74_GPIO PIN_CFG(74, GPIO) -#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) -#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) -#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) - -#define GPIO75_GPIO PIN_CFG(75, GPIO) -#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) -#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) -#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) - -#define GPIO76_GPIO PIN_CFG(76, GPIO) -#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) -#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) -#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) - -#define GPIO77_GPIO PIN_CFG(77, GPIO) -#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) -#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) -#define GPIO77_NONE PIN_CFG(77, ALT_C) - -#define GPIO78_GPIO PIN_CFG(78, GPIO) -#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) -#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) -#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) - -#define GPIO79_GPIO PIN_CFG(79, GPIO) -#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) -#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) -#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) - -#define GPIO80_GPIO PIN_CFG(80, GPIO) -#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) -#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) -#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) - -#define GPIO81_GPIO PIN_CFG(81, GPIO) -#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) -#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) -#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) - -#define GPIO82_GPIO PIN_CFG(82, GPIO) -#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) -#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) - -#define GPIO83_GPIO PIN_CFG(83, GPIO) -#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) -#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) - -#define GPIO84_GPIO PIN_CFG(84, GPIO) -#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) -#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) - -#define GPIO85_GPIO PIN_CFG(85, GPIO) -#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) -#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) - -#define GPIO86_GPIO PIN_CFG(86, GPIO) -#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) -#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) -#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) - -#define GPIO87_GPIO PIN_CFG(87, GPIO) -#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) -#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) -#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) - -#define GPIO88_GPIO PIN_CFG(88, GPIO) -#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) -#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) -#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) - -#define GPIO89_GPIO PIN_CFG(89, GPIO) -#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) -#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) -#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) - -#define GPIO90_GPIO PIN_CFG(90, GPIO) -#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) -#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) -#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) - -#define GPIO91_GPIO PIN_CFG(91, GPIO) -#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) -#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) -#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) - -#define GPIO92_GPIO PIN_CFG(92, GPIO) -#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) -#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) -#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) - -#define GPIO93_GPIO PIN_CFG(93, GPIO) -#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) -#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) -#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) - -#define GPIO94_GPIO PIN_CFG(94, GPIO) -#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) -#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) -#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) - -#define GPIO95_GPIO PIN_CFG(95, GPIO) -#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) -#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) -#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) - -#define GPIO96_GPIO PIN_CFG(96, GPIO) -#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) -#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) -#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) - -#define GPIO97_GPIO PIN_CFG(97, GPIO) -#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) -#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) -#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) - -#define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG_INPUT(128, ALT_A, PULLUP) -#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) - -#define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG_INPUT(129, ALT_A, PULLUP) -#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) - -#define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG_INPUT(130, ALT_A, PULLUP) -#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) -#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) - -#define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG_INPUT(131, ALT_A, PULLUP) -#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) - -#define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG_INPUT(132, ALT_A, PULLUP) -#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) - -#define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG_INPUT(133, ALT_A, PULLUP) -#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) - -#define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG_INPUT(134, ALT_A, PULLUP) -#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) - -#define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG_INPUT(135, ALT_A, PULLUP) -#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) - -#define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG_INPUT(136, ALT_A, PULLUP) -#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) - -#define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG_INPUT(137, ALT_A, PULLUP) -#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) - -#define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG_INPUT(138, ALT_A, PULLUP) -#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) - -#define GPIO139_GPIO PIN_CFG(139, GPIO) -#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) -#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) -#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) - -#define GPIO140_GPIO PIN_CFG(140, GPIO) -#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) -#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) -#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) - -#define GPIO141_GPIO PIN_CFG(141, GPIO) -#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) -#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) -#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) - -#define GPIO142_GPIO PIN_CFG(142, GPIO) -#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) -#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) -#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) - -#define GPIO143_GPIO PIN_CFG(143, GPIO) -#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) - -#define GPIO144_GPIO PIN_CFG(144, GPIO) -#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) - -#define GPIO145_GPIO PIN_CFG(145, GPIO) -#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) - -#define GPIO146_GPIO PIN_CFG(146, GPIO) -#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) - -#define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG(147, ALT_A) - -#define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG(148, ALT_A) - -#define GPIO149_GPIO PIN_CFG(149, GPIO) -#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) -#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) -#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) - -#define GPIO150_GPIO PIN_CFG(150, GPIO) -#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) -#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) - -#define GPIO151_GPIO PIN_CFG(151, GPIO) -#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) -#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) -#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) - -#define GPIO152_GPIO PIN_CFG(152, GPIO) -#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) -#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) -#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) - -#define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG(153, ALT_A) -#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) -#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) - -#define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG(154, ALT_A) -#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) -#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) - -#define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG(155, ALT_A) -#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) -#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) - -#define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG(156, ALT_A) -#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) -#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) - -#define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG(157, ALT_A) -#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) -#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) - -#define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG(158, ALT_A) -#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) -#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) - -#define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG(159, ALT_A) -#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) -#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) - -#define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG(160, ALT_A) -#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) -#define GPIO160_NONE PIN_CFG(160, ALT_C) - -#define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG(161, ALT_A) -#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) -#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) - -#define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG(162, ALT_A) -#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) -#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) - -#define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG(163, ALT_A) -#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) -#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) - -#define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG(164, ALT_A) -#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) -#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) - -#define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG(165, ALT_A) -#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) -#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) - -#define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG(166, ALT_A) -#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) -#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) - -#define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG(167, ALT_A) -#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) -#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) - -#define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG(168, ALT_A) -#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) -#define GPIO168_NONE PIN_CFG(168, ALT_C) - -#define GPIO169_GPIO PIN_CFG(169, GPIO) -#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) -#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) -#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) - -#define GPIO170_GPIO PIN_CFG(170, GPIO) -#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) -#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) -#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) - -#define GPIO171_GPIO PIN_CFG(171, GPIO) -#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) -#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) -#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) - -#define GPIO192_GPIO PIN_CFG(192, GPIO) -#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) - -#define GPIO193_GPIO PIN_CFG(193, GPIO) -#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) - -#define GPIO194_GPIO PIN_CFG(194, GPIO) -#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) - -#define GPIO195_GPIO PIN_CFG(195, GPIO) -#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) - -#define GPIO196_GPIO PIN_CFG(196, GPIO) -#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) - -#define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG_INPUT(197, ALT_A, PULLUP) - -#define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG_INPUT(198, ALT_A, PULLUP) - -#define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG_INPUT(199, ALT_A, PULLUP) - -#define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG_INPUT(200, ALT_A, PULLUP) - -#define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG_INPUT(201, ALT_A, PULLUP) - -#define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG_INPUT(202, ALT_A, PULLUP) -#define GPIO202_PWL PIN_CFG(202, ALT_B) -#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) - -#define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG_INPUT(203, ALT_A, PULLUP) - -#define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG_INPUT(204, ALT_A, PULLUP) - -#define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG_INPUT(205, ALT_A, PULLUP) - -#define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG_INPUT(206, ALT_A, PULLUP) - -#define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG_INPUT(207, ALT_A, PULLUP) - -#define GPIO208_GPIO PIN_CFG(208, GPIO) -#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) - -#define GPIO209_GPIO PIN_CFG(209, GPIO) -#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) -#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) - -#define GPIO210_GPIO PIN_CFG(210, GPIO) -#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) - -#define GPIO211_GPIO PIN_CFG(211, GPIO) -#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) - -#define GPIO212_GPIO PIN_CFG(212, GPIO) -#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) -#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) - -#define GPIO213_GPIO PIN_CFG(213, GPIO) -#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) -#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) - -#define GPIO214_GPIO PIN_CFG(214, GPIO) -#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) -#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) - -#define GPIO215_GPIO PIN_CFG(215, GPIO) -#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) -#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) -#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) -#define GPIO215_SPI2_TXD PIN_CFG(215, ALT_C) - -#define GPIO216_GPIO PIN_CFG(216, GPIO) -#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) -#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG(216, ALT_C) -#define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C) - -#define GPIO217_GPIO PIN_CFG(217, GPIO) -#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) -#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) -#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) -#define GPIO217_SPI2_CLK PIN_CFG(217, ALT_C) - -#define GPIO218_GPIO PIN_CFG(218, GPIO) -#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) -#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG(218, ALT_C) -#define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C) - -#define GPIO219_GPIO PIN_CFG(219, GPIO) -#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) -#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) - -#define GPIO220_GPIO PIN_CFG(220, GPIO) -#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) -#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) -#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) - -#define GPIO221_GPIO PIN_CFG(221, GPIO) -#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) -#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) - -#define GPIO222_GPIO PIN_CFG(222, GPIO) -#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) -#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) - -#define GPIO223_GPIO PIN_CFG(223, GPIO) -#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) -#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) -#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) - -#define GPIO224_GPIO PIN_CFG(224, GPIO) -#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) -#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) -#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) - -#define GPIO225_GPIO PIN_CFG(225, GPIO) -#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) -#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) -#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) - -#define GPIO226_GPIO PIN_CFG(226, GPIO) -#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) -#define GPIO226_PWL PIN_CFG(226, ALT_B) -#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) - -#define GPIO227_GPIO PIN_CFG(227, GPIO) -#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) - -#define GPIO228_GPIO PIN_CFG(228, GPIO) -#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) - -#define GPIO229_GPIO PIN_CFG(229, GPIO) -#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) -#define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG(229, ALT_C) - -#define GPIO230_GPIO PIN_CFG(230, GPIO) -#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) -#define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG(230, ALT_C) - -#define GPIO256_GPIO PIN_CFG(256, GPIO) -#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) - -#define GPIO257_GPIO PIN_CFG(257, GPIO) -#define GPIO257_USB_STP PIN_CFG(257, ALT_A) - -#define GPIO258_GPIO PIN_CFG(258, GPIO) -#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) -#define GPIO258_NONE PIN_CFG(258, ALT_B) -#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) - -#define GPIO259_GPIO PIN_CFG(259, GPIO) -#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) - -#define GPIO260_GPIO PIN_CFG(260, GPIO) -#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) - -#define GPIO261_GPIO PIN_CFG(261, GPIO) -#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) - -#define GPIO262_GPIO PIN_CFG(262, GPIO) -#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) - -#define GPIO263_GPIO PIN_CFG(263, GPIO) -#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) - -#define GPIO264_GPIO PIN_CFG(264, GPIO) -#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) - -#define GPIO265_GPIO PIN_CFG(265, GPIO) -#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) - -#define GPIO266_GPIO PIN_CFG(266, GPIO) -#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) - -#define GPIO267_GPIO PIN_CFG(267, GPIO) -#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) - -#endif diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index da1d5ad5bd4..a44967f3168 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -18,22 +18,18 @@ #include <linux/io.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <mach/hardware.h> -#include <mach/setup.h> + +#include "setup.h" + +#include "db8500-regs.h" +#include "id.h" /* This is called from headsmp.S to wakeup the secondary core */ extern void u8500_secondary_startup(void); /* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int pen_release = -1; - -/* * Write pen_release in a way that is guaranteed to be visible to all * observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. @@ -42,13 +38,12 @@ static void write_pen_release(int val) { pen_release = val; smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); + sync_cache_w(&pen_release); } static void __iomem *scu_base_addr(void) { - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_ux540_family()) return __io_address(U8500_SCU_BASE); else ux500_unknown_soc(); @@ -58,16 +53,9 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -void __cpuinit platform_secondary_init(unsigned int cpu) +static void ux500_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ @@ -80,7 +68,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; @@ -97,7 +85,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu_logical_map(cpu)); - smp_send_reschedule(cpu); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -118,7 +106,7 @@ static void __init wakeup_secondary(void) { void __iomem *backupram; - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_ux540_family()) backupram = __io_address(U8500_BACKUPRAM0_BASE); else ux500_unknown_soc(); @@ -145,7 +133,7 @@ static void __init wakeup_secondary(void) * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ -void __init smp_init_cpus(void) +static void __init ux500_smp_init_cpus(void) { void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; @@ -161,13 +149,21 @@ void __init smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } -void __init platform_smp_prepare_cpus(unsigned int max_cpus) +static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) { scu_enable(scu_base_addr()); wakeup_secondary(); } + +struct smp_operations ux500_smp_ops __initdata = { + .smp_init_cpus = ux500_smp_init_cpus, + .smp_prepare_cpus = ux500_smp_prepare_cpus, + .smp_secondary_init = ux500_secondary_init, + .smp_boot_secondary = ux500_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = ux500_cpu_die, +#endif +}; diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c new file mode 100644 index 00000000000..b80a9a2e356 --- /dev/null +++ b/arch/arm/mach-ux500/pm.c @@ -0,0 +1,194 @@ +/* + * Copyright (C) ST-Ericsson SA 2010-2013 + * Author: Rickard Andersson <rickard.andersson@stericsson.com> for + * ST-Ericsson. + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro. + * Author: Ulf Hansson <ulf.hansson@linaro.org> for Linaro. + * + * License terms: GNU General Public License (GPL) version 2 + * + */ + +#include <linux/kernel.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/suspend.h> +#include <linux/platform_data/arm-ux500-pm.h> + +#include "db8500-regs.h" + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130) +#define PRCM_ARM_WFI_STANDBY_WFI0 0x08 +#define PRCM_ARM_WFI_STANDBY_WFI1 0x10 +#define PRCM_IOCR (prcmu_base + 0x310) +#define PRCM_IOCR_IOFORCE 0x1 + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (prcmu_base + 0x328) +#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1 + +#define PRCM_A9_MASK_ACK (prcmu_base + 0x32c) +#define PRCM_ARMITMSK31TO0 (prcmu_base + 0x11c) +#define PRCM_ARMITMSK63TO32 (prcmu_base + 0x120) +#define PRCM_ARMITMSK95TO64 (prcmu_base + 0x124) +#define PRCM_ARMITMSK127TO96 (prcmu_base + 0x128) +#define PRCM_POWER_STATE_VAL (prcmu_base + 0x25C) +#define PRCM_ARMITVAL31TO0 (prcmu_base + 0x260) +#define PRCM_ARMITVAL63TO32 (prcmu_base + 0x264) +#define PRCM_ARMITVAL95TO64 (prcmu_base + 0x268) +#define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C) + +static void __iomem *prcmu_base; + +/* This function decouple the gic from the prcmu */ +int prcmu_gic_decouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 1 */ + writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, + PRCM_A9_MASK_REQ); + + /* Make sure the register is updated */ + readl(PRCM_A9_MASK_REQ); + + /* Wait a few cycles for the gic mask completion */ + udelay(1); + + return 0; +} + +/* This function recouple the gic with the prcmu */ +int prcmu_gic_recouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 0 */ + writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ); + + return 0; +} + +#define PRCMU_GIC_NUMBER_REGS 5 + +/* + * This function checks if there are pending irq on the gic. It only + * makes sense if the gic has been decoupled before with the + * db8500_prcmu_gic_decouple function. Disabling an interrupt only + * disables the forwarding of the interrupt to any CPU interface. It + * does not prevent the interrupt from changing state, for example + * becoming pending, or active and pending if it is already + * active. Hence, we have to check the interrupt is pending *and* is + * active. + */ +bool prcmu_gic_pending_irq(void) +{ + u32 pr; /* Pending register */ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* 5 registers. STI & PPI not skipped */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) { + + pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4); + er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + if (pr & er) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if there are pending interrupt on the + * prcmu which has been delegated to monitor the irqs with the + * db8500_prcmu_copy_gic_settings function. + */ +bool prcmu_pending_irq(void) +{ + u32 it, im; + int i; + + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + it = readl(PRCM_ARMITVAL31TO0 + i * 4); + im = readl(PRCM_ARMITMSK31TO0 + i * 4); + if (it & im) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if the specified cpu is in in WFI. It's usage + * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple + * function. Of course passing smp_processor_id() to this function will + * always return false... + */ +bool prcmu_is_cpu_in_wfi(int cpu) +{ + return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : + PRCM_ARM_WFI_STANDBY_WFI0; +} + +/* + * This function copies the gic SPI settings to the prcmu in order to + * monitor them and abort/finish the retention/off sequence or state. + */ +int prcmu_copy_gic_settings(void) +{ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* We skip the STI and PPI */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + er = readl_relaxed(dist_base + + GIC_DIST_ENABLE_SET + (i + 1) * 4); + writel(er, PRCM_ARMITMSK31TO0 + i * 4); + } + + return 0; +} + +#ifdef CONFIG_SUSPEND +static int ux500_suspend_enter(suspend_state_t state) +{ + cpu_do_idle(); + return 0; +} + +static int ux500_suspend_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; +} + +static const struct platform_suspend_ops ux500_suspend_ops = { + .enter = ux500_suspend_enter, + .valid = ux500_suspend_valid, +}; +#define UX500_SUSPEND_OPS (&ux500_suspend_ops) +#else +#define UX500_SUSPEND_OPS NULL +#endif + +void __init ux500_pm_init(u32 phy_base, u32 size) +{ + prcmu_base = ioremap(phy_base, size); + if (!prcmu_base) { + pr_err("could not remap PRCMU for PM functions\n"); + return; + } + /* + * On watchdog reboot the GIC is in some cases decoupled. + * This will make sure that the GIC is correctly configured. + */ + prcmu_gic_recouple(); + + /* Set up ux500 suspend callbacks. */ + suspend_set_ops(UX500_SUSPEND_OPS); +} diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/setup.h index 8b7ed82a286..2dea8b59d22 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -11,24 +11,20 @@ #ifndef __ASM_ARCH_SETUP_H #define __ASM_ARCH_SETUP_H +#include <asm/mach/arch.h> #include <asm/mach/time.h> #include <linux/init.h> +#include <linux/mfd/abx500/ab8500.h> -void __init ux500_map_io(void); -extern void __init u8500_map_io(void); +void ux500_restart(enum reboot_mode mode, const char *cmd); -extern struct device * __init u8500_init_devices(void); +void __init ux500_map_io(void); extern void __init ux500_init_irq(void); -extern void __init ux500_init_late(void); extern struct device *ux500_soc_device_init(const char *soc_id); -struct amba_device; -extern void __init amba_add_devices(struct amba_device *devs[], int num); - -struct sys_timer; -extern struct sys_timer ux500_timer; +extern void ux500_timer_init(void); #define __IO_DEV_DESC(x, sz) { \ .virtual = IO_ADDRESS(x), \ @@ -41,7 +37,10 @@ extern struct sys_timer ux500_timer; .virtual = IO_ADDRESS(x), \ .pfn = __phys_to_pfn(x), \ .length = sz, \ - .type = MT_MEMORY, \ + .type = MT_MEMORY_RWX, \ } +extern struct smp_operations ux500_smp_ops; +extern void ux500_cpu_die(unsigned int cpu); + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h index a616419bea7..0296ae5b0fd 100644 --- a/arch/arm/mach-ux500/ste-dma40-db8500.h +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -12,133 +12,74 @@ #define DB8500_DMA_NR_DEV 64 -enum dma_src_dev_type { - DB8500_DMA_DEV0_SPI0_RX = 0, - DB8500_DMA_DEV1_SD_MMC0_RX = 1, - DB8500_DMA_DEV2_SD_MMC1_RX = 2, - DB8500_DMA_DEV3_SD_MMC2_RX = 3, - DB8500_DMA_DEV4_I2C1_RX = 4, - DB8500_DMA_DEV5_I2C3_RX = 5, - DB8500_DMA_DEV6_I2C2_RX = 6, - DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */ - DB8500_DMA_DEV8_SSP0_RX = 8, - DB8500_DMA_DEV9_SSP1_RX = 9, - DB8500_DMA_DEV10_MCDE_RX = 10, - DB8500_DMA_DEV11_UART2_RX = 11, - DB8500_DMA_DEV12_UART1_RX = 12, - DB8500_DMA_DEV13_UART0_RX = 13, - DB8500_DMA_DEV14_MSP2_RX = 14, - DB8500_DMA_DEV15_I2C0_RX = 15, - DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16, - DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17, - DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18, - DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19, - DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20, - DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21, - DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22, - DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23, - DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24, - DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25, - DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26, - DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27, - DB8500_DMA_DEV28_SD_MM2_RX = 28, - DB8500_DMA_DEV29_SD_MM0_RX = 29, - DB8500_DMA_DEV30_MSP1_RX = 30, +/* + * Unless otherwise specified, all channels numbers are used for + * TX & RX, and can be used for either source or destination + * channels. + */ +enum dma_dev_type { + DB8500_DMA_DEV0_SPI0 = 0, + DB8500_DMA_DEV1_SD_MMC0 = 1, + DB8500_DMA_DEV2_SD_MMC1 = 2, + DB8500_DMA_DEV3_SD_MMC2 = 3, + DB8500_DMA_DEV4_I2C1 = 4, + DB8500_DMA_DEV5_I2C3 = 5, + DB8500_DMA_DEV6_I2C2 = 6, + DB8500_DMA_DEV7_I2C4 = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0 = 8, + DB8500_DMA_DEV9_SSP1 = 9, + DB8500_DMA_DEV10_MCDE_RX = 10, /* RX only */ + DB8500_DMA_DEV11_UART2 = 11, + DB8500_DMA_DEV12_UART1 = 12, + DB8500_DMA_DEV13_UART0 = 13, + DB8500_DMA_DEV14_MSP2 = 14, + DB8500_DMA_DEV15_I2C0 = 15, + DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23, + DB8500_DMA_DEV24_SXA0 = 24, + DB8500_DMA_DEV25_SXA1 = 25, + DB8500_DMA_DEV26_SXA2 = 26, + DB8500_DMA_DEV27_SXA3 = 27, + DB8500_DMA_DEV28_SD_MM2 = 28, + DB8500_DMA_DEV29_SD_MM0 = 29, + DB8500_DMA_DEV30_MSP1 = 30, /* On DB8500v2, MSP3 RX replaces MSP1 RX */ - DB8500_DMA_DEV30_MSP3_RX = 30, - DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31, - DB8500_DMA_DEV32_SD_MM1_RX = 32, - DB8500_DMA_DEV33_SPI2_RX = 33, - DB8500_DMA_DEV34_I2C3_RX2 = 34, - DB8500_DMA_DEV35_SPI1_RX = 35, - DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36, - DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37, - DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38, - DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39, - DB8500_DMA_DEV40_SPI3_RX = 40, - DB8500_DMA_DEV41_SD_MM3_RX = 41, - DB8500_DMA_DEV42_SD_MM4_RX = 42, - DB8500_DMA_DEV43_SD_MM5_RX = 43, - DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44, - DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45, - DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46, - DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47, - DB8500_DMA_DEV48_CAC1_RX = 48, - /* 49, 50 and 51 are not used */ - DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52, - DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53, - DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54, - DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55, - /* 56, 57, 58, 59 and 60 are not used */ - DB8500_DMA_DEV61_CAC0_RX = 61, - /* 62 and 63 are not used */ -}; - -enum dma_dest_dev_type { - DB8500_DMA_DEV0_SPI0_TX = 0, - DB8500_DMA_DEV1_SD_MMC0_TX = 1, - DB8500_DMA_DEV2_SD_MMC1_TX = 2, - DB8500_DMA_DEV3_SD_MMC2_TX = 3, - DB8500_DMA_DEV4_I2C1_TX = 4, - DB8500_DMA_DEV5_I2C3_TX = 5, - DB8500_DMA_DEV6_I2C2_TX = 6, - DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */ - DB8500_DMA_DEV8_SSP0_TX = 8, - DB8500_DMA_DEV9_SSP1_TX = 9, - /* 10 is not used*/ - DB8500_DMA_DEV11_UART2_TX = 11, - DB8500_DMA_DEV12_UART1_TX = 12, - DB8500_DMA_DEV13_UART0_TX = 13, - DB8500_DMA_DEV14_MSP2_TX = 14, - DB8500_DMA_DEV15_I2C0_TX = 15, - DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16, - DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17, - DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18, - DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19, - DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20, - DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21, - DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22, - DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23, - DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24, - DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25, - DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26, - DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27, - DB8500_DMA_DEV28_SD_MM2_TX = 28, - DB8500_DMA_DEV29_SD_MM0_TX = 29, - DB8500_DMA_DEV30_MSP1_TX = 30, - DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31, - DB8500_DMA_DEV32_SD_MM1_TX = 32, - DB8500_DMA_DEV33_SPI2_TX = 33, - DB8500_DMA_DEV34_I2C3_TX2 = 34, - DB8500_DMA_DEV35_SPI1_TX = 35, - DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36, - DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37, - DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38, - DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39, - DB8500_DMA_DEV40_SPI3_TX = 40, - DB8500_DMA_DEV41_SD_MM3_TX = 41, - DB8500_DMA_DEV42_SD_MM4_TX = 42, - DB8500_DMA_DEV43_SD_MM5_TX = 43, - DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44, - DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45, - DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46, - DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47, - DB8500_DMA_DEV48_CAC1_TX = 48, - DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, - DB8500_DMA_DEV50_HAC1_TX = 50, - DB8500_DMA_MEMCPY_TX_0 = 51, - DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52, - DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53, - DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54, - DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55, - DB8500_DMA_MEMCPY_TX_1 = 56, - DB8500_DMA_MEMCPY_TX_2 = 57, - DB8500_DMA_MEMCPY_TX_3 = 58, - DB8500_DMA_MEMCPY_TX_4 = 59, - DB8500_DMA_MEMCPY_TX_5 = 60, - DB8500_DMA_DEV61_CAC0_TX = 61, - DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, - DB8500_DMA_DEV63_HAC0_TX = 63, + DB8500_DMA_DEV30_MSP3 = 30, + DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31, + DB8500_DMA_DEV32_SD_MM1 = 32, + DB8500_DMA_DEV33_SPI2 = 33, + DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34, + DB8500_DMA_DEV35_SPI1 = 35, + DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39, + DB8500_DMA_DEV40_SPI3 = 40, + DB8500_DMA_DEV41_SD_MM3 = 41, + DB8500_DMA_DEV42_SD_MM4 = 42, + DB8500_DMA_DEV43_SD_MM5 = 43, + DB8500_DMA_DEV44_SXA4 = 44, + DB8500_DMA_DEV45_SXA5 = 45, + DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46, + DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47, + DB8500_DMA_DEV48_CAC1 = 48, + DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, /* TX only */ + DB8500_DMA_DEV50_HAC1_TX = 50, /* TX only */ + DB8500_DMA_MEMCPY_TX_0 = 51, /* TX only */ + DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52, + DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53, + DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54, + DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55, + /* 56 -> 60 are channels reserved for memcpy only */ + DB8500_DMA_DEV61_CAC0 = 61, + DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, /* TX only */ + DB8500_DMA_DEV63_HAC0_TX = 63, /* TX only */ }; #endif diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 66e7f00884a..87efda0aa34 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,107 +7,42 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> -#include <asm/smp_twd.h> +#include "setup.h" -#include <plat/mtu.h> - -#include <mach/setup.h> -#include <mach/hardware.h> -#include <mach/irqs.h> - -#ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, - U8500_TWD_BASE, IRQ_LOCALTIMER); - -static void __init ux500_twd_init(void) -{ - struct twd_local_timer *twd_local_timer; - int err; - - /* Use this to switch local timer base if changed in new ASICs */ - twd_local_timer = &u8500_twd_local_timer; - - if (of_have_populated_dt()) - twd_local_timer_of_register(); - else { - err = twd_local_timer_register(twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); - } -} -#else -#define ux500_twd_init() do { } while(0) -#endif +#include "db8500-regs.h" +#include "id.h" const static struct of_device_id prcmu_timer_of_match[] __initconst = { { .compatible = "stericsson,db8500-prcmu-timer-4", }, { }, }; -static void __init ux500_timer_init(void) +void __init ux500_timer_init(void) { - void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; void __iomem *tmp_base; struct device_node *np; - if (cpu_is_u8500_family()) { - mtu_timer_base = __io_address(U8500_MTU0_BASE); + if (cpu_is_u8500_family() || cpu_is_ux540_family()) prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); - } else { + else ux500_unknown_soc(); - } - /* TODO: Once MTU has been DT:ed place code above into else. */ - if (of_have_populated_dt()) { -#ifdef CONFIG_OF - np = of_find_matching_node(NULL, prcmu_timer_of_match); - if (!np) -#endif - goto dt_fail; + np = of_find_matching_node(NULL, prcmu_timer_of_match); + if (!np) + goto dt_fail; - tmp_base = of_iomap(np, 0); - if (!tmp_base) - goto dt_fail; + tmp_base = of_iomap(np, 0); + if (!tmp_base) + goto dt_fail; - prcmu_timer_base = tmp_base; - } + prcmu_timer_base = tmp_base; dt_fail: - /* Doing it the old fashioned way. */ - - /* - * Here we register the timerblocks active in the system. - * Localtimers (twd) is started when both cpu is up and running. - * MTU register a clocksource, clockevent and sched_clock. - * Since the MTU is located in the VAPE power domain - * it will be cleared in sleep which makes it unsuitable. - * We however need it as a timer tick (clockevent) - * during boot to calibrate delay until twd is started. - * RTC-RTT have problems as timer tick during boot since it is - * depending on delay which is not yet calibrated. RTC-RTT is in the - * always-on powerdomain and is used as clockevent instead of twd when - * sleeping. - * The PRCMU timer 4 register a clocksource and - * sched_clock with higher rating then MTU since is always-on. - * - */ - - nmdk_timer_init(mtu_timer_base); clksrc_dbx500_prcmu_init(prcmu_timer_base); - ux500_twd_init(); + clocksource_of_init(); } - -static void ux500_timer_reset(void) -{ - nmdk_clkevt_reset(); - nmdk_clksrc_reset(); -} - -struct sys_timer ux500_timer = { - .init = ux500_timer_init, - .resume = ux500_timer_reset, -}; diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c deleted file mode 100644 index a74af389bc6..00000000000 --- a/arch/arm/mach-ux500/usb.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ -#include <linux/platform_device.h> -#include <linux/usb/musb.h> -#include <linux/dma-mapping.h> - -#include <plat/ste_dma40.h> -#include <mach/hardware.h> -#include <mach/usb.h> - -#define MUSB_DMA40_RX_CH { \ - .mode = STEDMA40_MODE_LOGICAL, \ - .dir = STEDMA40_PERIPH_TO_MEM, \ - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, \ - .src_info.data_width = STEDMA40_WORD_WIDTH, \ - .dst_info.data_width = STEDMA40_WORD_WIDTH, \ - .src_info.psize = STEDMA40_PSIZE_LOG_16, \ - .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ - } - -#define MUSB_DMA40_TX_CH { \ - .mode = STEDMA40_MODE_LOGICAL, \ - .dir = STEDMA40_MEM_TO_PERIPH, \ - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, \ - .src_info.data_width = STEDMA40_WORD_WIDTH, \ - .dst_info.data_width = STEDMA40_WORD_WIDTH, \ - .src_info.psize = STEDMA40_PSIZE_LOG_16, \ - .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ - } - -static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS] - = { - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH -}; - -static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS] - = { - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, -}; - -static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = { - &musb_dma_rx_ch[0], - &musb_dma_rx_ch[1], - &musb_dma_rx_ch[2], - &musb_dma_rx_ch[3], - &musb_dma_rx_ch[4], - &musb_dma_rx_ch[5], - &musb_dma_rx_ch[6], - &musb_dma_rx_ch[7] -}; - -static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = { - &musb_dma_tx_ch[0], - &musb_dma_tx_ch[1], - &musb_dma_tx_ch[2], - &musb_dma_tx_ch[3], - &musb_dma_tx_ch[4], - &musb_dma_tx_ch[5], - &musb_dma_tx_ch[6], - &musb_dma_tx_ch[7] -}; - -static struct ux500_musb_board_data musb_board_data = { - .dma_rx_param_array = ux500_dma_rx_param_array, - .dma_tx_param_array = ux500_dma_tx_param_array, - .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS, - .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS, - .dma_filter = stedma40_filter, -}; - -static u64 ux500_musb_dmamask = DMA_BIT_MASK(32); - -static struct musb_hdrc_config musb_hdrc_config = { - .multipoint = true, - .dyn_fifo = true, - .num_eps = 16, - .ram_bits = 16, -}; - -static struct musb_hdrc_platform_data musb_platform_data = { - .mode = MUSB_OTG, - .config = &musb_hdrc_config, - .board_data = &musb_board_data, -}; - -static struct resource usb_resources[] = { - [0] = { - .name = "usb-mem", - .flags = IORESOURCE_MEM, - }, - - [1] = { - .name = "mc", /* hard-coded in musb */ - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device ux500_musb_device = { - .name = "musb-ux500", - .id = 0, - .dev = { - .platform_data = &musb_platform_data, - .dma_mask = &ux500_musb_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(usb_resources), - .resource = usb_resources, -}; - -static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type) -{ - u32 idx; - - for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++) - musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx]; -} - -static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type) -{ - u32 idx; - - for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++) - musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx]; -} - -void ux500_add_usb(struct device *parent, resource_size_t base, int irq, - int *dma_rx_cfg, int *dma_tx_cfg) -{ - ux500_musb_device.resource[0].start = base; - ux500_musb_device.resource[0].end = base + SZ_64K - 1; - ux500_musb_device.resource[1].start = irq; - ux500_musb_device.resource[1].end = irq; - - ux500_usb_dma_update_rx_ch_config(dma_rx_cfg); - ux500_usb_dma_update_tx_ch_config(dma_tx_cfg); - - ux500_musb_device.dev.parent = parent; - - platform_device_register(&ux500_musb_device); -} |