diff options
Diffstat (limited to 'arch/arm/mach-ux500/include')
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/clkdev.h | 7 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/db5500-regs.h | 103 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/db8500-regs.h | 147 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/debug-macro.S | 28 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/devices.h | 32 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/entry-macro.S | 89 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/gpio.h | 50 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/hardware.h | 128 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/io.h | 22 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs.h | 78 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/memory.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/setup.h | 41 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/smp.h | 32 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/system.h | 25 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/timex.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/uncompress.h | 58 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/vmalloc.h | 18 |
17 files changed, 0 insertions, 882 deletions
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801..00000000000 --- a/arch/arm/mach-ux500/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h deleted file mode 100644 index 545c80fc802..00000000000 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB5500_REGS_H -#define __MACH_DB5500_REGS_H - -#define U5500_PER1_BASE 0xA0020000 -#define U5500_PER2_BASE 0xA0010000 -#define U5500_PER3_BASE 0x80140000 -#define U5500_PER4_BASE 0x80150000 -#define U5500_PER5_BASE 0x80100000 -#define U5500_PER6_BASE 0x80120000 - -#define U5500_GIC_DIST_BASE 0xA0411000 -#define U5500_GIC_CPU_BASE 0xA0410100 -#define U5500_DMA_BASE 0x90030000 -#define U5500_MCDE_BASE 0xA0400000 -#define U5500_MODEM_BASE 0xB0000000 -#define U5500_L2CC_BASE 0xA0412000 -#define U5500_SCU_BASE 0xA0410000 -#define U5500_DSI1_BASE 0xA0401000 -#define U5500_DSI2_BASE 0xA0402000 -#define U5500_SIA_BASE 0xA0100000 -#define U5500_SVA_BASE 0x80200000 -#define U5500_HSEM_BASE 0xA0000000 -#define U5500_NAND0_BASE 0x60000000 -#define U5500_NAND1_BASE 0x70000000 -#define U5500_TWD_BASE 0xa0410600 -#define U5500_B2R2_BASE 0xa0200000 - -#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) -#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) -#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) -#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) -#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) -#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) -#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) -#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) - -#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) -#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) -#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) - -#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) -#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) -#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) -#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) - -#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) -#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) -#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) -#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) -#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) -#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) -#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) -#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) -#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) -#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) -#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) - -#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) -#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) -#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) -#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) -#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) -#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) -#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) -#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) -#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) -#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) -#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) -#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) -#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) -#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) -#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) -#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) -#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) - -#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) -#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) -#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) -#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000) -#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) -#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) -#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) -#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) -#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) -#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) - -#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE -#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) -#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE -#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE -#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE -#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE -#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) -#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h deleted file mode 100644 index 85fc6a80b38..00000000000 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB8500_REGS_H -#define __MACH_DB8500_REGS_H - -/* Base address and bank offsets for ESRAM */ -#define U8500_ESRAM_BASE 0x40000000 -#define U8500_ESRAM_BANK_SIZE 0x00020000 -#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE -#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) -/* Use bank 4 for DMA LCLA and LCPA */ -#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 -#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK4 + 0x4000) - -#define U8500_PER3_BASE 0x80000000 -#define U8500_STM_BASE 0x80100000 -#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_B2R2_BASE 0x80130000 -#define U8500_HSEM_BASE 0x80140000 -#define U8500_PER4_BASE 0x80150000 -#define U8500_ICN_BASE 0x81000000 - -#define U8500_BOOT_ROM_BASE 0x90000000 -/* ASIC ID is at 0xff4 offset within this region */ -#define U8500_ASIC_ID_BASE 0x9001F000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER5_BASE 0xa03e0000 -#define U8500_PER7_BASE_ED 0xa03d0000 - -#define U8500_SVA_BASE 0xa0100000 -#define U8500_SIA_BASE 0xa0200000 - -#define U8500_SGA_BASE 0xa0300000 -#define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE_ED 0xa0362000 -#define U8500_DMA_BASE 0x801C0000 /* v1 */ - -#define U8500_SBAG_BASE 0xa0390000 - -#define U8500_SCU_BASE 0xa0410000 -#define U8500_GIC_CPU_BASE 0xa0410100 -#define U8500_TWD_BASE 0xa0410600 -#define U8500_GIC_DIST_BASE 0xa0411000 -#define U8500_L2CC_BASE 0xa0412000 - -#define U8500_MODEM_I2C 0xb7e02000 - -#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) -#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) -#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) -#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) - -/* per7 base addressess */ -#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) -#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) -#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) -#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000) -#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000) - -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) - -/* per6 base addressess */ -#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) -#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ -#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ -#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* per5 base addressess */ -#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* per4 base addressess */ -#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) -#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) -#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) -#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) -#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) -#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) -#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) - -/* per3 base addresses */ -#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) -#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) -#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) -#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) -#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) -#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* per2 base addressess */ -#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) -#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) -#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) -#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) -#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) -#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) -#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) -#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) -#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) -#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) -#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* per1 base addresses */ -#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) -#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) -#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) -#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) -#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) -#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) -#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) -#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) - -#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 - -#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE -#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) -#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE -#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) -#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) -#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) -#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE -#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) -#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE - -#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S deleted file mode 100644 index c5203b7ea55..00000000000 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <mach/hardware.h> - -#if CONFIG_UX500_DEBUG_UART > 2 -#error Invalid Ux500 debug UART -#endif - -#define __UX500_UART(n) UX500_UART##n##_BASE -#define UX500_UART(n) __UX500_UART(n) -#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_BASE @ no, physical address - ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address - .endm - -#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h deleted file mode 100644 index c2b2f257494..00000000000 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __ASM_ARCH_DEVICES_H__ -#define __ASM_ARCH_DEVICES_H__ - -struct platform_device; -struct amba_device; - -extern struct platform_device u5500_gpio_devs[]; -extern struct platform_device u8500_gpio_devs[]; - -extern struct amba_device ux500_pl031_device; -extern struct amba_device u8500_ssp0_device; -extern struct amba_device ux500_uart0_device; -extern struct amba_device ux500_uart1_device; -extern struct amba_device ux500_uart2_device; - -extern struct platform_device ux500_i2c1_device; -extern struct platform_device ux500_i2c2_device; -extern struct platform_device ux500_i2c3_device; - -extern struct platform_device u8500_i2c0_device; -extern struct platform_device u8500_i2c4_device; -extern struct platform_device u8500_dma40_device; - -void dma40_u8500ed_fixup(void); - -#endif diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S deleted file mode 100644 index 60ea88db828..00000000000 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Low-level IRQ helper macros for U8500 platforms - * - * Copyright (C) 2009 ST-Ericsson. - * - * This file is a copy of ARM Realview platform. - * -just satisfied checkpatch script. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> -#include <asm/hardware/gic.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE) - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an - * interrupt if it's between 30 and 1020. The test_for_ipi - * routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number - * of the highest priority enabled interrupt. We then just - * need to check whether it is in the valid range for an - * IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - /* bits 12-10 = src CPU, 9-0 = int # */ - ldr \irqstat, [\base, #GIC_CPU_INTACK] - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ - * acknowledge register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of - * interrupt on the controller, since this requires the - * original irqstat value which we won't easily be able - * to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base - * are preserved.. - */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h deleted file mode 100644 index d548a622e7d..00000000000 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -/* - * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough - * room for a couple of GPIO expanders. - */ -#define ARCH_NR_GPIOS 350 - -#include <plat/gpio.h> - -#define __GPIO_RESOURCE(soc, block) \ - { \ - .start = soc##_GPIOBANK##block##_BASE, \ - .end = soc##_GPIOBANK##block##_BASE + 127, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = IRQ_GPIO##block, \ - .end = IRQ_GPIO##block, \ - .flags = IORESOURCE_IRQ, \ - } - -#define __GPIO_DEVICE(soc, block) \ - { \ - .name = "gpio", \ - .id = block, \ - .num_resources = 2, \ - .resource = &soc##_gpio_resources[block * 2], \ - .dev = { \ - .platform_data = &soc##_gpio_data[block], \ - }, \ - } - -#define GPIO_DATA(_name, first) \ - { \ - .name = _name, \ - .first_gpio = first, \ - .first_irq = NOMADIK_GPIO_TO_IRQ(first), \ - } - -#ifdef CONFIG_UX500_SOC_DB8500 -#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block) -#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block) -#elif defined(CONFIG_UX500_SOC_DB5500) -#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block) -#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block) -#endif - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h deleted file mode 100644 index 8656379a830..00000000000 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * U8500 hardware definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -/* macros to get at IO space when running virtually - * We dont map all the peripherals, let ioremap do - * this for us. We map only very basic peripherals here. - */ -#define U8500_IO_VIRTUAL 0xf0000000 -#define U8500_IO_PHYSICAL 0xa0000000 - -/* this macro is used in assembly, so no cast */ -#define IO_ADDRESS(x) \ - (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) - -/* typesafe io address */ -#define __io_address(n) __io(IO_ADDRESS(n)) -/* used by some plat-nomadik code */ -#define io_p2v(n) __io_address(n) - -#include <mach/db8500-regs.h> -#include <mach/db5500-regs.h> - -#ifdef CONFIG_UX500_SOC_DB8500 -#define UX500(periph) U8500_##periph##_BASE -#elif defined(CONFIG_UX500_SOC_DB5500) -#define UX500(periph) U5500_##periph##_BASE -#endif - -#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0) -#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1) -#define UX500_B2R2_BASE UX500(B2R2) - -#define UX500_CLKRST1_BASE UX500(CLKRST1) -#define UX500_CLKRST2_BASE UX500(CLKRST2) -#define UX500_CLKRST3_BASE UX500(CLKRST3) -#define UX500_CLKRST5_BASE UX500(CLKRST5) -#define UX500_CLKRST6_BASE UX500(CLKRST6) - -#define UX500_DMA_BASE UX500(DMA) -#define UX500_FSMC_BASE UX500(FSMC) - -#define UX500_GIC_CPU_BASE UX500(GIC_CPU) -#define UX500_GIC_DIST_BASE UX500(GIC_DIST) - -#define UX500_I2C1_BASE UX500(I2C1) -#define UX500_I2C2_BASE UX500(I2C2) -#define UX500_I2C3_BASE UX500(I2C3) - -#define UX500_L2CC_BASE UX500(L2CC) -#define UX500_MCDE_BASE UX500(MCDE) -#define UX500_MTU0_BASE UX500(MTU0) -#define UX500_MTU1_BASE UX500(MTU1) -#define UX500_PRCMU_BASE UX500(PRCMU) - -#define UX500_RNG_BASE UX500(RNG) -#define UX500_RTC_BASE UX500(RTC) - -#define UX500_SCU_BASE UX500(SCU) - -#define UX500_SDI0_BASE UX500(SDI0) -#define UX500_SDI1_BASE UX500(SDI1) -#define UX500_SDI2_BASE UX500(SDI2) -#define UX500_SDI3_BASE UX500(SDI3) -#define UX500_SDI4_BASE UX500(SDI4) - -#define UX500_SPI0_BASE UX500(SPI0) -#define UX500_SPI1_BASE UX500(SPI1) -#define UX500_SPI2_BASE UX500(SPI2) -#define UX500_SPI3_BASE UX500(SPI3) - -#define UX500_SIA_BASE UX500(SIA) -#define UX500_SVA_BASE UX500(SVA) - -#define UX500_TWD_BASE UX500(TWD) - -#define UX500_UART0_BASE UX500(UART0) -#define UX500_UART1_BASE UX500(UART1) -#define UX500_UART2_BASE UX500(UART2) - -#define UX500_USBOTG_BASE UX500(USBOTG) - -/* ST-Ericsson modified pl022 id */ -#define SSP_PER_ID 0x01080022 - -#ifndef __ASSEMBLY__ - -#include <asm/cputype.h> - -static inline bool cpu_is_u8500(void) -{ -#ifdef CONFIG_UX500_SOC_DB8500 - return 1; -#else - return 0; -#endif -} - -static inline bool cpu_is_u8500ed(void) -{ - return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; -} - -static inline bool cpu_is_u8500v1(void) -{ - return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; -} - -static inline bool cpu_is_u5500(void) -{ -#ifdef CONFIG_UX500_SOC_DB5500 - return 1; -#else - return 0; -#endif -} - -#endif - -#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h deleted file mode 100644 index 1cf3f44ce5b..00000000000 --- a/arch/arm/mach-ux500/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-u8500/include/mach/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h deleted file mode 100644 index 7970684b1d0..00000000000 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 ST-Ericsson. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef ASM_ARCH_IRQS_H -#define ASM_ARCH_IRQS_H - -#include <mach/hardware.h> - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -/* Shared Peripheral Interrupt (SHPI) */ -#define IRQ_SHPI_START 32 - -/* Interrupt numbers generic for shared peripheral */ -#define IRQ_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_UART0 (IRQ_SHPI_START + 11) -#define IRQ_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_SSP0 (IRQ_SHPI_START + 14) -#define IRQ_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_RTC_RTT (IRQ_SHPI_START + 18) -#define IRQ_UART1 (IRQ_SHPI_START + 19) -#define IRQ_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DMA (IRQ_SHPI_START + 25) -#define IRQ_UART2 (IRQ_SHPI_START + 26) -#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29) -#define IRQ_MSP0 (IRQ_SHPI_START + 31) -#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) -#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) -#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) -#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_AB4500 (IRQ_SHPI_START + 40) -#define IRQ_DISP (IRQ_SHPI_START + 48) -#define IRQ_SiPI3 (IRQ_SHPI_START + 49) -#define IRQ_I2C4 (IRQ_SHPI_START + 51) -#define IRQ_SSP1 (IRQ_SHPI_START + 52) -#define IRQ_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_MSP1 (IRQ_SHPI_START + 62) -#define IRQ_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_SDMMC4 (IRQ_SHPI_START + 99) -#define IRQ_HSIRD0 (IRQ_SHPI_START + 104) -#define IRQ_HSIRD1 (IRQ_SHPI_START + 105) -#define IRQ_HSITD0 (IRQ_SHPI_START + 106) -#define IRQ_HSITD1 (IRQ_SHPI_START + 107) -#define IRQ_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_GPIO7 (IRQ_SHPI_START + 126) -#define IRQ_GPIO8 (IRQ_SHPI_START + 127) - -/* There are 128 shared peripheral interrupts assigned to - * INTID[160:32]. The first 32 interrupts are reserved. - */ -#define U8500_SOC_NR_IRQS 161 - -/* After chip-specific IRQ numbers we have the GPIO ones */ -#define NOMADIK_NR_GPIO 288 -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS) -#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) - -#endif /*ASM_ARCH_IRQS_H*/ diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h deleted file mode 100644 index 510571a59e2..00000000000 --- a/arch/arm/mach-ux500/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) -#define BUS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h deleted file mode 100644 index e978dbd9e21..00000000000 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * These symbols are needed for board-specific files to call their - * own cpu-specific files - */ -#ifndef __ASM_ARCH_SETUP_H -#define __ASM_ARCH_SETUP_H - -#include <asm/mach/time.h> -#include <linux/init.h> - -extern void __init ux500_map_io(void); -extern void __init u5500_map_io(void); -extern void __init u8500_map_io(void); - -extern void __init ux500_init_devices(void); -extern void __init u5500_init_devices(void); -extern void __init u8500_init_devices(void); - -extern void __init ux500_init_irq(void); -/* We re-use nomadik_timer for this platform */ -extern void nmdk_timer_init(void); - -extern void __init amba_add_devices(struct amba_device *devs[], int num); - -struct sys_timer; -extern struct sys_timer ux500_timer; - -#define __IO_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_DEVICE, \ -} - -#endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h deleted file mode 100644 index b59f7bc9725..00000000000 --- a/arch/arm/mach-ux500/include/mach/smp.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is based ARM realview platform. - * Copyright (C) ARM Limited. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef ASMARM_ARCH_SMP_H -#define ASMARM_ARCH_SMP_H - -#include <asm/hardware/gic.h> - -/* This is required to wakeup the secondary core */ -extern void u8500_secondary_startup(void); - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - -/* - * We use IRQ1 as the IPI - */ -static inline void smp_cross_call(const struct cpumask *mask) -{ - gic_raise_softirq(mask, 1); -} -#endif diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h deleted file mode 100644 index c0cd8006f1a..00000000000 --- a/arch/arm/mach-ux500/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - /* yet to be implemented - TODO */ -} - -#endif diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h deleted file mode 100644 index d0942c17401..00000000000 --- a/arch/arm/mach-ux500/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 110000000 - -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h deleted file mode 100644 index 8552eb188b5..00000000000 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <asm/setup.h> -#include <linux/io.h> -#include <mach/hardware.h> - -#define U8500_UART_DR 0x80007000 -#define U8500_UART_LCRH 0x8000702c -#define U8500_UART_CR 0x80007030 -#define U8500_UART_FR 0x80007018 - -static void putc(const char c) -{ - /* Do nothing if the UART is not enabled. */ - if (!(readb(U8500_UART_CR) & 0x1)) - return; - - if (c == '\n') - putc('\r'); - - while (readb(U8500_UART_FR) & (1 << 5)) - barrier(); - writeb(c, U8500_UART_DR); -} - -static void flush(void) -{ - if (!(readb(U8500_UART_CR) & 0x1)) - return; - while (readb(U8500_UART_FR) & (1 << 3)) - barrier(); -} - -static inline void arch_decomp_setup(void) -{ -} - -#define arch_decomp_wdog() /* nothing to do here */ - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h deleted file mode 100644 index a4945cb4117..00000000000 --- a/arch/arm/mach-ux500/include/mach/vmalloc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xf0000000UL |