diff options
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500-sdi.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-sdi.c | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c deleted file mode 100644 index b3e61a38e5c..00000000000 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include <asm/mach-types.h> -#include "devices.h" - -#include "db8500-regs.h" -#include "devices-db8500.h" -#include "board-mop500.h" -#include "ste-dma40-db8500.h" - -/* - * v2 has a new version of this block that need to be forced, the number found - * in hardware is incorrect - */ -#define U8500_SDI_V2_PERIPHID 0x10480180 - -/* - * SDI 0 (MicroSD slot) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV29_SD_MM0, -}; - -static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV29_SD_MM0, -}; -#endif - -struct mmci_platform_data mop500_sdi0_data = { - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_SD_HIGHSPEED | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_UHS_SDR12 | - MMC_CAP_UHS_SDR25, - .gpio_wp = -1, - .sigdir = MCI_ST_FBCLKEN | - MCI_ST_CMDDIREN | - MCI_ST_DATA0DIREN | - MCI_ST_DATA2DIREN, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi0_dma_cfg_rx, - .dma_tx_param = &mop500_sdi0_dma_cfg_tx, -#endif -}; - -static void sdi0_configure(struct device *parent) -{ - /* Add the device, force v2 to subrevision 1 */ - db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); -} - -void mop500_sdi_tc35892_init(struct device *parent) -{ - mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; - sdi0_configure(parent); -} - -/* - * SDI1 (SDIO WLAN) - */ -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV32_SD_MM1, -}; - -static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV32_SD_MM1, -}; -#endif - -struct mmci_platform_data mop500_sdi1_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_NONREMOVABLE, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &sdi1_dma_cfg_rx, - .dma_tx_param = &sdi1_dma_cfg_tx, -#endif -}; - -/* - * SDI 2 (POP eMMC, not on DB8500ed) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV28_SD_MM2, -}; - -static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV28_SD_MM2, -}; -#endif - -struct mmci_platform_data mop500_sdi2_data = { - .ocr_mask = MMC_VDD_165_195, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NONREMOVABLE | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_CMD23, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi2_dma_cfg_rx, - .dma_tx_param = &mop500_sdi2_dma_cfg_tx, -#endif -}; - -/* - * SDI 4 (on-board eMMC) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV42_SD_MM4, -}; - -static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV42_SD_MM4, -}; -#endif - -struct mmci_platform_data mop500_sdi4_data = { - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NONREMOVABLE | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_CMD23, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi4_dma_cfg_rx, - .dma_tx_param = &mop500_sdi4_dma_cfg_tx, -#endif -}; - -void __init mop500_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - - /* - * On boards with the TC35892 GPIO expander, sdi0 will finally - * be added when the TC35892 initializes and calls - * mop500_sdi_tc35892_init() above. - */ -} - -void __init snowball_sdi_init(struct device *parent) -{ - /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ - mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; - mop500_sdi0_data.cd_invert = true; - sdi0_configure(parent); -} - -void __init hrefv60_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_configure(parent); - /* WLAN SDIO channel */ - db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); -} |