diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-armadillo800eva.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-armadillo800eva.c | 897 |
1 files changed, 714 insertions, 183 deletions
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 9bd135531d7..30fcac73a54 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -24,10 +24,18 @@ #include <linux/err.h> #include <linux/kernel.h> #include <linux/input.h> +#include <linux/platform_data/st1232_pdata.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/regulator/driver.h> +#include <linux/pinctrl/machine.h> +#include <linux/pwm.h> +#include <linux/pwm_backlight.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/gpio-regulator.h> +#include <linux/regulator/machine.h> #include <linux/sh_eth.h> #include <linux/videodev2.h> #include <linux/usb/renesas_usbhs.h> @@ -35,16 +43,26 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/i2c-gpio.h> +#include <linux/reboot.h> #include <mach/common.h> #include <mach/irqs.h> +#include <mach/r8a7740.h> +#include <media/mt9t112.h> +#include <media/sh_mobile_ceu.h> +#include <media/soc_camera.h> #include <asm/page.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/r8a7740.h> #include <video/sh_mobile_lcdc.h> +#include <video/sh_mobile_hdmi.h> +#include <sound/sh_fsi.h> +#include <sound/simple_card.h> + +#include "sh-gpio.h" /* * CON1 Camera Module @@ -108,6 +126,22 @@ */ /* + * FSI-WM8978 + * + * this command is required when playback. + * + * # amixer set "Headphone" 50 + * + * this command is required when capture. + * + * # amixer set "Input PGA" 15 + * # amixer set "Left Input Mixer MicP" on + * # amixer set "Left Input Mixer MicN" on + * # amixer set "Right Input Mixer MicN" on + * # amixer set "Right Input Mixer MicP" on + */ + +/* * USB function * * When you use USB Function, @@ -117,15 +151,9 @@ * These are a little bit complex. * see * usbhsf_power_ctrl() - * - * CAUTION - * - * It uses autonomy mode for USB hotplug at this point - * (= usbhs_private.platform_callback.get_vbus is NULL), - * since we don't know what's happen on PM control - * on this workaround. */ -#define USBCR1 0xe605810a +#define IRQ7 irq_pin(7) +#define USBCR1 IOMEM(0xe605810a) #define USBH 0xC6700000 #define USBH_USBCTR 0x10834 @@ -148,7 +176,7 @@ static int usbhsf_get_id(struct platform_device *pdev) return USBHS_GADGET; } -static void usbhsf_power_ctrl(struct platform_device *pdev, +static int usbhsf_power_ctrl(struct platform_device *pdev, void __iomem *base, int enable) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -202,9 +230,25 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, clk_disable(priv->pci); /* usb work around */ clk_disable(priv->usb24); /* usb work around */ } + + return 0; +} + +static int usbhsf_get_vbus(struct platform_device *pdev) +{ + return gpio_get_value(209); +} + +static irqreturn_t usbhsf_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + + renesas_usbhs_call_notify_hotplug(pdev); + + return IRQ_HANDLED; } -static void usbhsf_hardware_exit(struct platform_device *pdev) +static int usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -227,11 +271,16 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->host = NULL; priv->func = NULL; priv->usbh_base = NULL; + + free_irq(IRQ7, pdev); + + return 0; } static int usbhsf_hardware_init(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); + int ret; priv->phy = clk_get(&pdev->dev, "phy"); priv->usb24 = clk_get(&pdev->dev, "usb24"); @@ -251,6 +300,14 @@ static int usbhsf_hardware_init(struct platform_device *pdev) return -EIO; } + ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH); + /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */ clk_set_rate(priv->usb24, clk_get_rate(clk_get_parent(priv->usb24))); @@ -262,6 +319,7 @@ static struct usbhsf_private usbhsf_private = { .info = { .platform_callback = { .get_id = usbhsf_get_id, + .get_vbus = usbhsf_get_vbus, .hardware_init = usbhsf_hardware_init, .hardware_exit = usbhsf_hardware_exit, .power_ctrl = usbhsf_power_ctrl, @@ -269,6 +327,8 @@ static struct usbhsf_private usbhsf_private = { .driver_param = { .buswait_bwait = 5, .detection_delay = 5, + .d0_rx_id = SHDMA_SLAVE_USBHS_RX, + .d1_tx_id = SHDMA_SLAVE_USBHS_TX, }, } }; @@ -281,7 +341,7 @@ static struct resource usbhsf_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = evt2irq(0x0A20), + .start = gic_spi(51), .flags = IORESOURCE_IRQ, }, }; @@ -300,7 +360,6 @@ static struct platform_device usbhsf_device = { static struct sh_eth_plat_data sh_eth_platdata = { .phy = 0x00, /* LAN8710A */ .edmac_endian = EDMAC_LITTLE_ENDIAN, - .register_type = SH_ETH_REG_GIGABIT, .phy_interface = PHY_INTERFACE_MODE_MII, }; @@ -314,22 +373,60 @@ static struct resource sh_eth_resources[] = { .end = 0xe9a02000 - 1, .flags = IORESOURCE_MEM, }, { - .start = evt2irq(0x0500), + .start = gic_spi(110), .flags = IORESOURCE_IRQ, }, }; static struct platform_device sh_eth_device = { - .name = "sh-eth", + .name = "r8a7740-gether", .id = -1, .dev = { .platform_data = &sh_eth_platdata, + .dma_mask = &sh_eth_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = sh_eth_resources, .num_resources = ARRAY_SIZE(sh_eth_resources), }; -/* LCDC */ +/* PWM */ +static struct resource pwm_resources[] = { + [0] = { + .start = 0xe6600000, + .end = 0xe66000ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device pwm_device = { + .name = "renesas-tpu-pwm", + .id = -1, + .num_resources = ARRAY_SIZE(pwm_resources), + .resource = pwm_resources, +}; + +static struct pwm_lookup pwm_lookup[] = { + PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL, + 33333, PWM_POLARITY_INVERSED), +}; + +/* LCDC and backlight */ +static struct platform_pwm_backlight_data pwm_backlight_data = { + .lth_brightness = 50, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 33333, /* 30kHz */ + .enable_gpio = 61, +}; + +static struct platform_device pwm_backlight_device = { + .name = "pwm-backlight", + .dev = { + .platform_data = &pwm_backlight_data, + }, +}; + static struct fb_videomode lcdc0_mode = { .name = "AMPIER/AM-800480", .xres = 800, @@ -368,7 +465,7 @@ static struct resource lcdc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x580), + .start = gic_spi(177), .flags = IORESOURCE_IRQ, }, }; @@ -380,18 +477,116 @@ static struct platform_device lcdc0_device = { .id = 0, .dev = { .platform_data = &lcdc0_info, - .coherent_dma_mask = ~0, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +/* + * LCDC1/HDMI + */ +static struct sh_mobile_hdmi_info hdmi_info = { + .flags = HDMI_OUTPUT_PUSH_PULL | + HDMI_OUTPUT_POLARITY_HI | + HDMI_32BIT_REG | + HDMI_HAS_HTOP1 | + HDMI_SND_SRC_SPDIF, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be03ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(131), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = "HDMI emma3pf", + .start = 0xe6be4000, + .end = 0xe6be43ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, +}; + +static const struct fb_videomode lcdc1_mode = { + .name = "HDMI 720p", + .xres = 1280, + .yres = 720, + .pixclock = 13468, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .refresh = 60, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, +}; + +static struct sh_mobile_lcdc_info hdmi_lcdc_info = { + .clock_source = LCDC_CLK_PERIPHERAL, /* HDMI clock */ + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_modes = &lcdc1_mode, + .num_modes = 1, + .tx_dev = &hdmi_device, + .panel_cfg = { + .width = 1280, + .height = 720, + }, + }, +}; + +static struct resource hdmi_lcdc_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe948000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(178), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(hdmi_lcdc_resources), + .resource = hdmi_lcdc_resources, + .id = 1, + .dev = { + .platform_data = &hdmi_lcdc_info, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, 99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, 100, "SW4"), + GPIO_KEY(KEY_MENU, 97, "SW5"), + GPIO_KEY(KEY_HOME, 98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -407,21 +602,134 @@ static struct platform_device gpio_keys_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mmcif"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + +/* Fixed 3.3V regulator used by LCD backlight */ +static struct regulator_consumer_supply fixed5v0_power_consumers[] = { + REGULATOR_SUPPLY("power", "pwm-backlight.0"), +}; + +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = 75, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* 1.8 / 3.3V SDHI0 VccQ regulator */ +static struct regulator_consumer_supply vccq_sdhi0_consumers[] = { + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vccq_sdhi0_init_data = { + .constraints = { + .input_uV = 3300000, + .min_uV = 1800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers), + .consumer_supplies = vccq_sdhi0_consumers, +}; + +static struct gpio vccq_sdhi0_gpios[] = { + {17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, +}; + +static struct gpio_regulator_state vccq_sdhi0_states[] = { + { .value = 3300000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config vccq_sdhi0_info = { + .supply_name = "vqmmc", + + .enable_gpio = 74, + .enable_high = 1, + .enabled_at_boot = 0, + + .gpios = vccq_sdhi0_gpios, + .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios), + + .states = vccq_sdhi0_states, + .nr_states = ARRAY_SIZE(vccq_sdhi0_states), + + .type = REGULATOR_VOLTAGE, + .init_data = &vccq_sdhi0_init_data, +}; + +static struct platform_device vccq_sdhi0 = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &vccq_sdhi0_info, + }, +}; + +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data vcc_sdhi1_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers), + .consumer_supplies = vcc_sdhi1_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi1_info = { + .supply_name = "SDHI1 Vcc", + .microvolts = 3300000, + .gpio = 16, + .enable_high = 1, + .init_data = &vcc_sdhi1_init_data, +}; + +static struct platform_device vcc_sdhi1 = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &vcc_sdhi1_info, + }, +}; + /* SDHI0 */ -/* - * FIXME - * - * It use polling mode here, since - * CD (= Card Detect) pin is not connected to SDHI0_CD. - * We can use IRQ31 as card detect irq, - * but it needs chattering removal operation - */ -#define IRQ31 evt2irq(0x33E0) static struct sh_mobile_sdhi_info sdhi0_info = { - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ - MMC_CAP_NEEDS_POLL, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .cd_gpio = 167, }; static struct resource sdhi0_resources[] = { @@ -436,12 +744,12 @@ static struct resource sdhi0_resources[] = { */ { .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x0E20), + .start = gic_spi(118), .flags = IORESOURCE_IRQ, }, { .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x0E40), + .start = gic_spi(119), .flags = IORESOURCE_IRQ, }, }; @@ -458,9 +766,13 @@ static struct platform_device sdhi0_device = { /* SDHI1 */ static struct sh_mobile_sdhi_info sdhi1_info = { - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + /* Port72 cannot generate IRQs, will be used in polling mode. */ + .cd_gpio = 72, }; static struct resource sdhi1_resources[] = { @@ -471,15 +783,15 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0E80), + .start = gic_spi(121), .flags = IORESOURCE_IRQ, }, [2] = { - .start = evt2irq(0x0EA0), + .start = gic_spi(122), .flags = IORESOURCE_IRQ, }, [3] = { - .start = evt2irq(0x0EC0), + .start = gic_spi(123), .flags = IORESOURCE_IRQ, }, }; @@ -494,13 +806,26 @@ static struct platform_device sdhi1_device = { .resource = sdhi1_resources, }; +static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = { + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_ctrl", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_cd", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_wp", "sdhi1"), +}; + /* MMCIF */ static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .ccs_unsupported = true, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct resource sh_mmcif_resources[] = { @@ -512,12 +837,12 @@ static struct resource sh_mmcif_resources[] = { }, [1] = { /* MMC ERR */ - .start = evt2irq(0x1AC0), + .start = gic_spi(56), .flags = IORESOURCE_IRQ, }, [2] = { /* MMC NOR */ - .start = evt2irq(0x1AE0), + .start = gic_spi(57), .flags = IORESOURCE_IRQ, }, }; @@ -532,11 +857,208 @@ static struct platform_device sh_mmcif_device = { .resource = sh_mmcif_resources, }; +/* Camera */ +static int mt9t111_power(struct device *dev, int mode) +{ + struct clk *mclk = clk_get(NULL, "video1"); + + if (IS_ERR(mclk)) { + dev_err(dev, "can't get video1 clock\n"); + return -EINVAL; + } + + if (mode) { + /* video1 (= CON1 camera) expect 24MHz */ + clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); + clk_enable(mclk); + gpio_set_value(158, 1); + } else { + gpio_set_value(158, 0); + clk_disable(mclk); + } + + clk_put(mclk); + + return 0; +} + +static struct i2c_board_info i2c_camera_mt9t111 = { + I2C_BOARD_INFO("mt9t112", 0x3d), +}; + +static struct mt9t112_camera_info mt9t111_info = { + .divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 }, +}; + +static struct soc_camera_link mt9t111_link = { + .i2c_adapter_id = 0, + .bus_id = 0, + .board_info = &i2c_camera_mt9t111, + .power = mt9t111_power, + .priv = &mt9t111_info, +}; + +static struct platform_device camera_device = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &mt9t111_link, + }, +}; + +/* CEU0 */ +static struct sh_mobile_ceu_info sh_mobile_ceu0_info = { + .flags = SH_CEU_FLAG_LOWER_8BIT, +}; + +static struct resource ceu0_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(160), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu0_device = { + .name = "sh_mobile_ceu", + .id = 0, + .num_resources = ARRAY_SIZE(ceu0_resources), + .resource = ceu0_resources, + .dev = { + .platform_data = &sh_mobile_ceu0_info, + .coherent_dma_mask = 0xffffffff, + }, +}; + +/* FSI */ +static struct sh_fsi_platform_info fsi_info = { + /* FSI-WM8978 */ + .port_a = { + .tx_id = SHDMA_SLAVE_FSIA_TX, + }, + /* FSI-HDMI */ + .port_b = { + .flags = SH_FSI_FMT_SPDIF | + SH_FSI_ENABLE_STREAM_MODE | + SH_FSI_CLK_CPG, + .tx_id = SHDMA_SLAVE_FSIB_TX, + } +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xfe1f0000, + .end = 0xfe1f0400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(9), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = -1, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, +}; + +/* FSI-WM8978 */ +static struct asoc_simple_card_info fsi_wm8978_info = { + .name = "wm8978", + .card = "FSI2A-WM8978", + .codec = "wm8978.0-001a", + .platform = "sh_fsi2", + .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, + .cpu_dai = { + .fmt = SND_SOC_DAIFMT_IB_NF, + .name = "fsia-dai", + }, + .codec_dai = { + .name = "wm8978-hifi", + .sysclk = 12288000, + }, +}; + +static struct platform_device fsi_wm8978_device = { + .name = "asoc-simple-card", + .id = 0, + .dev = { + .platform_data = &fsi_wm8978_info, + }, +}; + +/* FSI-HDMI */ +static struct asoc_simple_card_info fsi2_hdmi_info = { + .name = "HDMI", + .card = "FSI2B-HDMI", + .codec = "sh-mobile-hdmi", + .platform = "sh_fsi2", + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "sh_mobile_hdmi-hifi", + }, +}; + +static struct platform_device fsi_hdmi_device = { + .name = "asoc-simple-card", + .id = 1, + .dev = { + .platform_data = &fsi2_hdmi_info, + }, +}; + +/* RTC: RTC connects i2c-gpio. */ +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 208, + .scl_pin = 91, + .udelay = 5, /* 100 kHz */ +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 2, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; + /* I2C */ +static struct st1232_pdata st1232_i2c0_pdata = { + .reset_gpio = 166, +}; + static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), - .irq = evt2irq(0x0340), + .irq = irq_pin(10), + .platform_data = &st1232_i2c0_pdata, + }, + { + I2C_BOARD_INFO("wm8978", 0x1a), + }, +}; + +static struct i2c_board_info i2c2_devices[] = { + { + I2C_BOARD_INFO("s35390a", 0x30), + .type = "s35390a", }, }; @@ -545,10 +1067,85 @@ static struct i2c_board_info i2c0_devices[] = { */ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, + &pwm_device, + &pwm_backlight_device, &gpio_keys_device, &sh_eth_device, + &vcc_sdhi0, + &vccq_sdhi0, &sdhi0_device, &sh_mmcif_device, + &hdmi_device, + &hdmi_lcdc_device, + &camera_device, + &ceu0_device, + &fsi_device, + &fsi_wm8978_device, + &fsi_hdmi_device, + &i2c_gpio_device, +}; + +static const struct pinctrl_map eva_pinctrl_map[] = { + /* CEU0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_data_0_7", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_clk_0", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_sync", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_field", "ceu0"), + /* FSIA */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_mclk_out", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_data_in_1", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_data_out_0", "fsia"), + /* FSIB */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", + "fsib_mclk_in", "fsib"), + /* GETHER */ + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", + "gether_mii", "gether"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", + "gether_int", "gether"), + /* HDMI */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", + "hdmi", "hdmi"), + /* LCD0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_data24_0", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_lclk_1", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_sync", "lcd0"), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", + "mmc0_data8_1", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", + "mmc0_ctrl_1", "mmc0"), + /* SCIFA1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", + "scifa1_data", "scifa1"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_wp", "sdhi0"), + /* ST1232 */ + PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740", + "intc_irq10", "intc"), + /* TPU0 */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740", + "tpu0_to2_1", "tpu0"), + /* USBHS */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740", + "intc_irq7_1", "intc"), }; static void __init eva_clock_init(void) @@ -556,10 +1153,12 @@ static void __init eva_clock_init(void) struct clk *system = clk_get(NULL, "system_clk"); struct clk *xtal1 = clk_get(NULL, "extal1"); struct clk *usb24s = clk_get(NULL, "usb24s"); + struct clk *fsibck = clk_get(NULL, "fsibck"); if (IS_ERR(system) || IS_ERR(xtal1) || - IS_ERR(usb24s)) { + IS_ERR(usb24s) || + IS_ERR(fsibck)) { pr_err("armadillo800eva board clock init failed\n"); goto clock_error; } @@ -570,6 +1169,9 @@ static void __init eva_clock_init(void) /* usb24s use extal1 (= system) clock (= 24MHz) */ clk_set_parent(usb24s, system); + /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ + clk_set_rate(fsibck, 12288000); + clock_error: if (!IS_ERR(system)) clk_put(system); @@ -577,134 +1179,63 @@ clock_error: clk_put(xtal1); if (!IS_ERR(usb24s)) clk_put(usb24s); + if (!IS_ERR(fsibck)) + clk_put(fsibck); } /* * board init */ +#define GPIO_PORT7CR IOMEM(0xe6050007) +#define GPIO_PORT8CR IOMEM(0xe6050008) static void __init eva_init(void) { - eva_clock_init(); + struct platform_device *usb = NULL; - r8a7740_pinmux_init(); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers, + ARRAY_SIZE(fixed5v0_power_consumers), 5000000); - /* SCIFA1 */ - gpio_request(GPIO_FN_SCIFA1_RXD, NULL); - gpio_request(GPIO_FN_SCIFA1_TXD, NULL); - - /* LCDC0 */ - gpio_request(GPIO_FN_LCDC0_SELECT, NULL); - gpio_request(GPIO_FN_LCD0_D0, NULL); - gpio_request(GPIO_FN_LCD0_D1, NULL); - gpio_request(GPIO_FN_LCD0_D2, NULL); - gpio_request(GPIO_FN_LCD0_D3, NULL); - gpio_request(GPIO_FN_LCD0_D4, NULL); - gpio_request(GPIO_FN_LCD0_D5, NULL); - gpio_request(GPIO_FN_LCD0_D6, NULL); - gpio_request(GPIO_FN_LCD0_D7, NULL); - gpio_request(GPIO_FN_LCD0_D8, NULL); - gpio_request(GPIO_FN_LCD0_D9, NULL); - gpio_request(GPIO_FN_LCD0_D10, NULL); - gpio_request(GPIO_FN_LCD0_D11, NULL); - gpio_request(GPIO_FN_LCD0_D12, NULL); - gpio_request(GPIO_FN_LCD0_D13, NULL); - gpio_request(GPIO_FN_LCD0_D14, NULL); - gpio_request(GPIO_FN_LCD0_D15, NULL); - gpio_request(GPIO_FN_LCD0_D16, NULL); - gpio_request(GPIO_FN_LCD0_D17, NULL); - gpio_request(GPIO_FN_LCD0_D18_PORT40, NULL); - gpio_request(GPIO_FN_LCD0_D19_PORT4, NULL); - gpio_request(GPIO_FN_LCD0_D20_PORT3, NULL); - gpio_request(GPIO_FN_LCD0_D21_PORT2, NULL); - gpio_request(GPIO_FN_LCD0_D22_PORT0, NULL); - gpio_request(GPIO_FN_LCD0_D23_PORT1, NULL); - gpio_request(GPIO_FN_LCD0_DCK, NULL); - gpio_request(GPIO_FN_LCD0_VSYN, NULL); - gpio_request(GPIO_FN_LCD0_HSYN, NULL); - gpio_request(GPIO_FN_LCD0_DISP, NULL); - gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - - gpio_request(GPIO_PORT61, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT61, 1); - - gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */ - gpio_direction_output(GPIO_PORT202, 0); - - /* Touchscreen */ - gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request(GPIO_PORT166, NULL); /* TP_RST_B */ - gpio_direction_output(GPIO_PORT166, 1); + pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); + + r8a7740_pinmux_init(); + r8a7740_meram_workaround(); /* GETHER */ - gpio_request(GPIO_FN_ET_CRS, NULL); - gpio_request(GPIO_FN_ET_MDC, NULL); - gpio_request(GPIO_FN_ET_MDIO, NULL); - gpio_request(GPIO_FN_ET_TX_ER, NULL); - gpio_request(GPIO_FN_ET_RX_ER, NULL); - gpio_request(GPIO_FN_ET_ERXD0, NULL); - gpio_request(GPIO_FN_ET_ERXD1, NULL); - gpio_request(GPIO_FN_ET_ERXD2, NULL); - gpio_request(GPIO_FN_ET_ERXD3, NULL); - gpio_request(GPIO_FN_ET_TX_CLK, NULL); - gpio_request(GPIO_FN_ET_TX_EN, NULL); - gpio_request(GPIO_FN_ET_ETXD0, NULL); - gpio_request(GPIO_FN_ET_ETXD1, NULL); - gpio_request(GPIO_FN_ET_ETXD2, NULL); - gpio_request(GPIO_FN_ET_ETXD3, NULL); - gpio_request(GPIO_FN_ET_PHY_INT, NULL); - gpio_request(GPIO_FN_ET_COL, NULL); - gpio_request(GPIO_FN_ET_RX_DV, NULL); - gpio_request(GPIO_FN_ET_RX_CLK, NULL); - - gpio_request(GPIO_PORT18, NULL); /* PHY_RST */ - gpio_direction_output(GPIO_PORT18, 1); + gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ /* USB */ - gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */ - gpio_direction_input(GPIO_PORT159); + gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ - if (gpio_get_value(GPIO_PORT159)) { + if (gpio_get_value(159)) { /* USB Host */ } else { /* USB Func */ - gpio_request(GPIO_FN_VBUS, NULL); + /* + * The USBHS interrupt handlers needs to read the IRQ pin value + * (HI/LOW) to diffentiate USB connection and disconnection + * events (usbhsf_get_vbus()). We thus need to select both the + * intc_irq7_1 pin group and GPIO 209 here. + */ + gpio_request_one(209, GPIOF_IN, NULL); + platform_device_register(&usbhsf_device); + usb = &usbhsf_device; } - /* SDHI0 */ - gpio_request(GPIO_FN_SDHI0_CMD, NULL); - gpio_request(GPIO_FN_SDHI0_CLK, NULL); - gpio_request(GPIO_FN_SDHI0_D0, NULL); - gpio_request(GPIO_FN_SDHI0_D1, NULL); - gpio_request(GPIO_FN_SDHI0_D2, NULL); - gpio_request(GPIO_FN_SDHI0_D3, NULL); - gpio_request(GPIO_FN_SDHI0_WP, NULL); - - gpio_request(GPIO_PORT17, NULL); /* SDHI0_18/33_B */ - gpio_request(GPIO_PORT74, NULL); /* SDHI0_PON */ - gpio_request(GPIO_PORT75, NULL); /* SDSLOT1_PON */ - gpio_direction_output(GPIO_PORT17, 0); - gpio_direction_output(GPIO_PORT74, 1); - gpio_direction_output(GPIO_PORT75, 1); - - /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ + /* CON1/CON15 Camera */ + gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ + gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ + /* see mt9t111_power() */ + gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ - /* - * MMCIF - * - * Here doesn't care SW1.4 status, - * since CON2 is not mounted. - */ - gpio_request(GPIO_FN_MMC1_CLK_PORT103, NULL); - gpio_request(GPIO_FN_MMC1_CMD_PORT104, NULL); - gpio_request(GPIO_FN_MMC1_D0_PORT149, NULL); - gpio_request(GPIO_FN_MMC1_D1_PORT148, NULL); - gpio_request(GPIO_FN_MMC1_D2_PORT147, NULL); - gpio_request(GPIO_FN_MMC1_D3_PORT146, NULL); - gpio_request(GPIO_FN_MMC1_D4_PORT145, NULL); - gpio_request(GPIO_FN_MMC1_D5_PORT144, NULL); - gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL); - gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL); + /* FSI-WM8978 */ + gpio_request(7, NULL); + gpio_request(8, NULL); + gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ + gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ /* * CAUTION @@ -712,60 +1243,60 @@ static void __init eva_init(void) * DBGMD/LCDC0/FSIA MUX * DBGMD_SELECT_B should be set after setting PFC Function. */ - gpio_request(GPIO_PORT176, NULL); - gpio_direction_output(GPIO_PORT176, 1); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL); /* * We can switch CON8/CON14 by SW1.5, * but it needs after DBGMD_SELECT_B */ - gpio_request(GPIO_PORT6, NULL); - gpio_direction_input(GPIO_PORT6); - if (gpio_get_value(GPIO_PORT6)) { + gpio_request_one(6, GPIOF_IN, NULL); + if (gpio_get_value(6)) { /* CON14 enable */ } else { /* CON8 (SDHI1) enable */ - gpio_request(GPIO_FN_SDHI1_CLK, NULL); - gpio_request(GPIO_FN_SDHI1_CMD, NULL); - gpio_request(GPIO_FN_SDHI1_D0, NULL); - gpio_request(GPIO_FN_SDHI1_D1, NULL); - gpio_request(GPIO_FN_SDHI1_D2, NULL); - gpio_request(GPIO_FN_SDHI1_D3, NULL); - gpio_request(GPIO_FN_SDHI1_CD, NULL); - gpio_request(GPIO_FN_SDHI1_WP, NULL); - - gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */ - gpio_direction_output(GPIO_PORT16, 1); + pinctrl_register_mappings(eva_sdhi1_pinctrl_map, + ARRAY_SIZE(eva_sdhi1_pinctrl_map)); + platform_device_register(&vcc_sdhi1); platform_device_register(&sdhi1_device); } #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff); + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); + i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices)); r8a7740_add_standard_devices(); platform_add_devices(eva_devices, ARRAY_SIZE(eva_devices)); + + rmobile_add_device_to_domain("A4LC", &lcdc0_device); + rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device); + if (usb) + rmobile_add_device_to_domain("A3SP", usb); + + r8a7740_pm_init(); } static void __init eva_earlytimer_init(void) { r8a7740_clock_init(MD_CK0 | MD_CK2); shmobile_earlytimer_init(); + + /* the rate of extal1 clock must be set before late_time_init */ + eva_clock_init(); } -static void __init eva_add_early_devices(void) +#define RESCNT2 IOMEM(0xe6188020) +static void eva_restart(enum reboot_mode mode, const char *cmd) { - r8a7740_add_early_devices(); - - /* override timer setup with board-specific code */ - shmobile_timer.init = eva_earlytimer_init; + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); } static const char *eva_boards_compat_dt[] __initdata = { @@ -775,11 +1306,11 @@ static const char *eva_boards_compat_dt[] __initdata = { DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .map_io = r8a7740_map_io, - .init_early = eva_add_early_devices, - .init_irq = r8a7740_init_irq, - .handle_irq = shmobile_handle_irq_intc, + .init_early = r8a7740_add_early_devices, + .init_irq = r8a7740_init_irq_of, .init_machine = eva_init, .init_late = shmobile_init_late, - .timer = &shmobile_timer, + .init_time = eva_earlytimer_init, .dt_compat = eva_boards_compat_dt, + .restart = eva_restart, MACHINE_END |