diff options
Diffstat (limited to 'arch/arm/mach-shmobile/Kconfig')
| -rw-r--r-- | arch/arm/mach-shmobile/Kconfig | 203 |
1 files changed, 146 insertions, 57 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3912ce91fee..798073057e5 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,6 +1,62 @@ -if ARCH_SHMOBILE +config ARCH_SHMOBILE + bool + +menuconfig ARCH_SHMOBILE_MULTI + bool "Renesas ARM SoCs" if ARCH_MULTI_V7 + depends on MMU + select ARCH_SHMOBILE + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select ARM_GIC + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE + select NO_IOPORT_MAP + select PINCTRL + select ARCH_REQUIRE_GPIOLIB + +if ARCH_SHMOBILE_MULTI + +#comment "Renesas ARM SoCs System Type" + +config ARCH_EMEV2 + bool "Emma Mobile EV2" + select SYS_SUPPORTS_EM_STI + +config ARCH_R7S72100 + bool "RZ/A1H (R7S72100)" + select SYS_SUPPORTS_SH_MTU2 + +config ARCH_R8A7790 + bool "R-Car H2 (R8A77900)" + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + +config ARCH_R8A7791 + bool "R-Car M2 (R8A77910)" + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + +comment "Renesas ARM SoCs Board Type" -comment "SH-Mobile System Type" +config MACH_GENMAI + bool "Genmai board" + depends on ARCH_R7S72100 + +config MACH_KOELSCH + bool "Koelsch board" + depends on ARCH_R8A7791 + select MICREL_PHY if SH_ETH + +config MACH_LAGER + bool "Lager board" + depends on ARCH_R8A7790 + select MICREL_PHY if SH_ETH + +comment "Renesas ARM SoCs System Configuration" +endif + +if ARCH_SHMOBILE_LEGACY + +comment "Renesas ARM SoCs System Type" config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)" @@ -8,6 +64,8 @@ config ARCH_SH7372 select ARM_CPU_SUSPEND if PM || CPU_IDLE select CPU_V7 select SH_CLK_CPG + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" @@ -17,15 +75,19 @@ config ARCH_SH73A0 select I2C select SH_CLK_CPG select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 - select HAVE_ARM_ARCH_TIMER select SH_CLK_CPG select RENESAS_IRQC + select ARCH_HAS_OPP + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" @@ -34,6 +96,8 @@ config ARCH_R8A7740 select CPU_V7 select SH_CLK_CPG select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU config ARCH_R8A7778 bool "R-Car M1A (R8A77781)" @@ -41,8 +105,8 @@ config ARCH_R8A7778 select CPU_V7 select SH_CLK_CPG select ARM_GIC - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI + select SYS_SUPPORTS_SH_TMU + select RENESAS_INTC_IRQPIN config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" @@ -50,58 +114,74 @@ config ARCH_R8A7779 select ARM_GIC select CPU_V7 select SH_CLK_CPG - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_TMU config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 - select HAVE_ARM_ARCH_TIMER + select MIGHT_HAVE_PCI select SH_CLK_CPG select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -config ARCH_EMEV2 - bool "Emma Mobile EV2" +config ARCH_R8A7791 + bool "R-Car M2 (R8A77910)" select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 + select MIGHT_HAVE_PCI + select SH_CLK_CPG + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -comment "SH-Mobile Board Type" +config ARCH_R7S72100 + bool "RZ/A1H (R7S72100)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + select SYS_SUPPORTS_SH_MTU2 -config MACH_AG5EVM - bool "AG5EVM board" - depends on ARCH_SH73A0 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SH_LCD_MIPI_DSI +comment "Renesas ARM SoCs Board Type" config MACH_APE6EVM bool "APE6EVM board" depends on ARCH_R8A73A4 + select SMSC_PHY if SMSC911X select USE_OF +config MACH_APE6EVM_REFERENCE + bool "APE6EVM board - Reference Device Tree Implementation" + depends on ARCH_R8A73A4 + select SMSC_PHY if SMSC911X + select USE_OF + ---help--- + Use reference implementation of APE6EVM board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_MACKEREL bool "mackerel board" depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SMSC_PHY if SMSC911X select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF -config MACH_KOTA2 - bool "KOTA2 board" - depends on ARCH_SH73A0 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_ARMADILLO800EVA bool "Armadillo-800 EVA board" depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SMSC_PHY if SH_ETH select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF @@ -110,11 +190,12 @@ config MACH_ARMADILLO800EVA_REFERENCE depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SMSC_PHY if SH_ETH select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF ---help--- - Use reference implementation of Aramdillo800 EVA board support - which makes a greater use of device tree at the expense + Use reference implementation of Armadillo800 EVA board support + which makes greater use of device tree at the expense of not supporting a number of devices. This is intended to aid developers @@ -123,7 +204,27 @@ config MACH_BOCKW bool "BOCK-W platform" depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB - select RENESAS_INTC_IRQPIN + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4554 if SND_SIMPLE_CARD + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF + +config MACH_BOCKW_REFERENCE + bool "BOCK-W - Reference Device Tree Implementation" + depends on ARCH_R8A7778 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of BockW board support + which makes use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + +config MACH_GENMAI + bool "Genmai board" + depends on ARCH_R7S72100 select USE_OF config MACH_MARZEN @@ -131,6 +232,7 @@ config MACH_MARZEN depends on ARCH_R8A7779 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF config MACH_MARZEN_REFERENCE bool "MARZEN board - Reference Device Tree Implementation" @@ -149,17 +251,18 @@ config MACH_LAGER bool "Lager board" depends on ARCH_R8A7790 select USE_OF + select MICREL_PHY if SH_ETH + select SND_SOC_AK4642 if SND_SIMPLE_CARD -config MACH_KZM9D - bool "KZM9D board" - depends on ARCH_EMEV2 - select REGULATOR_FIXED_VOLTAGE if REGULATOR +config MACH_KOELSCH + bool "Koelsch board" + depends on ARCH_R8A7791 select USE_OF + select MICREL_PHY if SH_ETH config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR @@ -180,12 +283,21 @@ config MACH_KZM9G_REFERENCE This is intended to aid developers -comment "SH-Mobile System Configuration" +comment "Renesas ARM SoCs System Configuration" config CPU_HAS_INTEVT bool default y +config SH_CLK_CPG + bool + +source "drivers/sh/Kconfig" + +endif + +if ARCH_SHMOBILE + menu "Timer and clock configuration" config SHMOBILE_TIMER_HZ @@ -196,33 +308,10 @@ config SHMOBILE_TIMER_HZ Allows the configuration of the timer frequency. It is customary to have the timer interrupt run at 1000 Hz or 100 Hz, but in the case of low timer frequencies other values may be more suitable. - SH-Mobile systems using a 32768 Hz RCLK for clock events may want - to select a HZ value such as 128 that can evenly divide RCLK. + Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may + want to select a HZ value such as 128 that can evenly divide RCLK. A HZ value that does not divide evenly may cause timer drift. -config SH_TIMER_CMT - bool "CMT timer driver" - default y - help - This enables build of the CMT timer driver. - -config SH_TIMER_TMU - bool "TMU timer driver" - default y - help - This enables build of the TMU timer driver. - -config EM_TIMER_STI - bool "STI timer driver" - default y - help - This enables build of the STI timer driver. - endmenu -config SH_CLK_CPG - bool - -source "drivers/sh/Kconfig" - endif |