diff options
Diffstat (limited to 'arch/arm/mach-shmobile/Kconfig')
| -rw-r--r-- | arch/arm/mach-shmobile/Kconfig | 345 |
1 files changed, 264 insertions, 81 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0c8f6cf3e94..798073057e5 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,102 +1,302 @@ -if ARCH_SHMOBILE +config ARCH_SHMOBILE + bool + +menuconfig ARCH_SHMOBILE_MULTI + bool "Renesas ARM SoCs" if ARCH_MULTI_V7 + depends on MMU + select ARCH_SHMOBILE + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select ARM_GIC + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE + select NO_IOPORT_MAP + select PINCTRL + select ARCH_REQUIRE_GPIOLIB + +if ARCH_SHMOBILE_MULTI + +#comment "Renesas ARM SoCs System Type" + +config ARCH_EMEV2 + bool "Emma Mobile EV2" + select SYS_SUPPORTS_EM_STI + +config ARCH_R7S72100 + bool "RZ/A1H (R7S72100)" + select SYS_SUPPORTS_SH_MTU2 + +config ARCH_R8A7790 + bool "R-Car H2 (R8A77900)" + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + +config ARCH_R8A7791 + bool "R-Car M2 (R8A77910)" + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + +comment "Renesas ARM SoCs Board Type" + +config MACH_GENMAI + bool "Genmai board" + depends on ARCH_R7S72100 -comment "SH-Mobile System Type" +config MACH_KOELSCH + bool "Koelsch board" + depends on ARCH_R8A7791 + select MICREL_PHY if SH_ETH -config ARCH_SH7367 - bool "SH-Mobile G3 (SH7367)" - select CPU_V6 +config MACH_LAGER + bool "Lager board" + depends on ARCH_R8A7790 + select MICREL_PHY if SH_ETH + +comment "Renesas ARM SoCs System Configuration" +endif + +if ARCH_SHMOBILE_LEGACY + +comment "Renesas ARM SoCs System Type" + +config ARCH_SH7372 + bool "SH-Mobile AP4 (SH7372)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_CPU_SUSPEND if PM || CPU_IDLE + select CPU_V7 select SH_CLK_CPG + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU + +config ARCH_SH73A0 + bool "SH-Mobile AG5 (R8A73A00)" select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 + select I2C + select SH_CLK_CPG + select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU -config ARCH_SH7377 - bool "SH-Mobile G4 (SH7377)" +config ARCH_R8A73A4 + bool "R-Mobile APE6 (R8A73A40)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC select CPU_V7 select SH_CLK_CPG + select RENESAS_IRQC + select ARCH_HAS_OPP + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU + +config ARCH_R8A7740 + bool "R-Mobile A1 (R8A77400)" select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU -config ARCH_SH7372 - bool "SH-Mobile AP4 (SH7372)" +config ARCH_R8A7778 + bool "R-Car M1A (R8A77781)" + select ARCH_WANT_OPTIONAL_GPIOLIB select CPU_V7 select SH_CLK_CPG + select ARM_GIC + select SYS_SUPPORTS_SH_TMU + select RENESAS_INTC_IRQPIN + +config ARCH_R8A7779 + bool "R-Car H1 (R8A77790)" select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_TMU -config ARCH_SH73A0 - bool "SH-Mobile AG5 (R8A73A00)" +config ARCH_R8A7790 + bool "R-Car H2 (R8A77900)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC select CPU_V7 + select MIGHT_HAVE_PCI select SH_CLK_CPG + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE + +config ARCH_R8A7791 + bool "R-Car M2 (R8A77910)" select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC + select CPU_V7 + select MIGHT_HAVE_PCI + select SH_CLK_CPG + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -comment "SH-Mobile Board Type" +config ARCH_R7S72100 + bool "RZ/A1H (R7S72100)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + select SYS_SUPPORTS_SH_MTU2 + +comment "Renesas ARM SoCs Board Type" -config MACH_G3EVM - bool "G3EVM board" - depends on ARCH_SH7367 +config MACH_APE6EVM + bool "APE6EVM board" + depends on ARCH_R8A73A4 + select SMSC_PHY if SMSC911X + select USE_OF + +config MACH_APE6EVM_REFERENCE + bool "APE6EVM board - Reference Device Tree Implementation" + depends on ARCH_R8A73A4 + select SMSC_PHY if SMSC911X + select USE_OF + ---help--- + Use reference implementation of APE6EVM board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + +config MACH_MACKEREL + bool "mackerel board" + depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SMSC_PHY if SMSC911X + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF -config MACH_G4EVM - bool "G4EVM board" - depends on ARCH_SH7377 +config MACH_ARMADILLO800EVA + bool "Armadillo-800 EVA board" + depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SMSC_PHY if SH_ETH + select SND_SOC_WM8978 if SND_SIMPLE_CARD + select USE_OF -config MACH_AP4EVB - bool "AP4EVB board" - depends on ARCH_SH7372 +config MACH_ARMADILLO800EVA_REFERENCE + bool "Armadillo-800 EVA board - Reference Device Tree Implementation" + depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB - select SH_LCD_MIPI_DSI + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SMSC_PHY if SH_ETH + select SND_SOC_WM8978 if SND_SIMPLE_CARD + select USE_OF + ---help--- + Use reference implementation of Armadillo800 EVA board support + which makes greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers -choice - prompt "AP4EVB LCD panel selection" - default AP4EVB_QHD - depends on MACH_AP4EVB +config MACH_BOCKW + bool "BOCK-W platform" + depends on ARCH_R8A7778 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4554 if SND_SIMPLE_CARD + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF -config AP4EVB_QHD - bool "MIPI-DSI QHD (960x540)" +config MACH_BOCKW_REFERENCE + bool "BOCK-W - Reference Device Tree Implementation" + depends on ARCH_R8A7778 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of BockW board support + which makes use of device tree at the expense + of not supporting a number of devices. -config AP4EVB_WVGA - bool "Parallel WVGA (800x480)" + This is intended to aid developers -endchoice +config MACH_GENMAI + bool "Genmai board" + depends on ARCH_R7S72100 + select USE_OF -config MACH_AG5EVM - bool "AG5EVM board" +config MACH_MARZEN + bool "MARZEN board" + depends on ARCH_R8A7779 select ARCH_REQUIRE_GPIOLIB - select SH_LCD_MIPI_DSI - depends on ARCH_SH73A0 + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF -config MACH_MACKEREL - bool "mackerel board" - depends on ARCH_SH7372 +config MACH_MARZEN_REFERENCE + bool "MARZEN board - Reference Device Tree Implementation" + depends on ARCH_R8A7779 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of Marzen board support + which makes use of device tree at the expense + of not supporting a number of devices. -comment "SH-Mobile System Configuration" + This is intended to aid developers -menu "Memory configuration" +config MACH_LAGER + bool "Lager board" + depends on ARCH_R8A7790 + select USE_OF + select MICREL_PHY if SH_ETH + select SND_SOC_AK4642 if SND_SIMPLE_CARD -config MEMORY_START - hex "Physical memory start address" - default "0x50000000" if MACH_G3EVM - default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ - MACH_MACKEREL - default "0x00000000" +config MACH_KOELSCH + bool "Koelsch board" + depends on ARCH_R8A7791 + select USE_OF + select MICREL_PHY if SH_ETH + +config MACH_KZM9G + bool "KZM-A9-GT board" + depends on ARCH_SH73A0 + select ARCH_HAS_OPP + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF + +config MACH_KZM9G_REFERENCE + bool "KZM-A9-GT board - Reference Device Tree Implementation" + depends on ARCH_SH73A0 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF ---help--- - Tweak this only when porting to a new machine which does not - already have a defconfig. Changing it from the known correct - value on any of the known systems will only lead to disaster. - -config MEMORY_SIZE - hex "Physical memory size" - default "0x08000000" if MACH_G3EVM - default "0x08000000" if MACH_G4EVM - default "0x20000000" if MACH_AG5EVM - default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL - default "0x04000000" - help - This sets the default memory size assumed by your kernel. It can - be overridden as normal by the 'mem=' argument on the kernel command - line. + Use reference implementation of KZM-A9-GT board support + which makes as greater use of device tree at the expense + of not supporting a number of devices. -endmenu + This is intended to aid developers + +comment "Renesas ARM SoCs System Configuration" + +config CPU_HAS_INTEVT + bool + default y + +config SH_CLK_CPG + bool + +source "drivers/sh/Kconfig" + +endif + +if ARCH_SHMOBILE menu "Timer and clock configuration" @@ -108,27 +308,10 @@ config SHMOBILE_TIMER_HZ Allows the configuration of the timer frequency. It is customary to have the timer interrupt run at 1000 Hz or 100 Hz, but in the case of low timer frequencies other values may be more suitable. - SH-Mobile systems using a 32768 Hz RCLK for clock events may want - to select a HZ value such as 128 that can evenly divide RCLK. + Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may + want to select a HZ value such as 128 that can evenly divide RCLK. A HZ value that does not divide evenly may cause timer drift. -config SH_TIMER_CMT - bool "CMT timer driver" - default y - help - This enables build of the CMT timer driver. - -config SH_TIMER_TMU - bool "TMU timer driver" - default y - help - This enables build of the TMU timer driver. - endmenu -config SH_CLK_CPG - bool - -source "drivers/sh/Kconfig" - endif |