1 files changed, 69 insertions, 20 deletions

diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c105ba..3c43219bc88 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,35 +14,73 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
 
 #include <mach/h3xxx.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
 /*
  * helper for sa1100fb
  */
+static struct gpio h3100_lcd_gpio[] = {
+	{ H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" },
+	{ H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" },
+};
+
+static bool h3100_lcd_request(void)
+{
+	static bool h3100_lcd_ok;
+	int rc;
+
+	if (h3100_lcd_ok)
+		return true;
+
+	rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio));
+	if (rc)
+		pr_err("%s: can't request GPIOs\n", __func__);
+	else
+		h3100_lcd_ok = true;
+
+	return h3100_lcd_ok;
+}
+
 static void h3100_lcd_power(int enable)
 {
-	if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
-		gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
-		gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
-		gpio_free(H3XXX_EGPIO_LCD_ON);
-	} else {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
-	}
+	if (!h3100_lcd_request())
+		return;
+
+	gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+	gpio_set_value(H3XXX_EGPIO_LCD_ON, enable);
 }
 
+static struct sa1100fb_mach_info h3100_lcd_info = {
+	.pixclock	= 406977, 	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 26,		.vsync_len	= 41,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 4,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 1,
+	.cmap_inverse	= 1,
+
+	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.lcd_power = h3100_lcd_power,
+};
 
 static void __init h3100_map_io(void)
 {
 	h3xxx_map_io();
 
-	sa1100fb_lcd_power = h3100_lcd_power;
-
 	/* Older bootldrs put GPIO2-9 in alternate mode on the
 	   assumption that they are used for video */
 	GAFR &= ~0x000001fb;
@@ -51,6 +89,11 @@ static void __init h3100_map_io(void)
 /*
  * This turns the IRDA power on or off on the Compaq H3100
  */
+static struct gpio h3100_irda_gpio[] = {
+	{ H3100_GPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
+	{ H3100_GPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
+};
+
 static int h3100_irda_set_power(struct device *dev, unsigned int state)
 {
 	gpio_set_value(H3100_GPIO_IR_ON, state);
@@ -62,33 +105,39 @@ static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
 	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
 }
 
+static int h3100_irda_startup(struct device *dev)
+{
+	return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
+}
+
+static void h3100_irda_shutdown(struct device *dev)
+{
+	return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
+}
+
 static struct irda_platform_data h3100_irda_data = {
 	.set_power	= h3100_irda_set_power,
 	.set_speed	= h3100_irda_set_speed,
-};
-
-static struct gpio_default_state h3100_default_gpio[] = {
-	{ H3100_GPIO_IR_ON,	GPIO_MODE_OUT0, "IrDA power" },
-	{ H3100_GPIO_IR_FSEL,	GPIO_MODE_OUT0, "IrDA fsel" },
-	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
-	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
-	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
-	{ H3100_GPIO_LCD_3V_ON,	GPIO_MODE_OUT0,	"LCD 3v" },
+	.startup	= h3100_irda_startup,
+	.shutdown	= h3100_irda_shutdown,
 };
 
 static void __init h3100_mach_init(void)
 {
-	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
 	h3xxx_mach_init();
+
+	sa11x0_register_lcd(&h3100_lcd_info);
 	sa11x0_register_irda(&h3100_irda_data);
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
 	.atag_offset	= 0x100,
 	.map_io		= h3100_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= h3100_mach_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END