diff options
Diffstat (limited to 'arch/arm/mach-s5pv210')
46 files changed, 1101 insertions, 2009 deletions
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 37b5a97594a..f60f2862856 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,11 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select S3C_PL330_DMA + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_EXT_INT - select S5P_HRT - select S5PV210_PM if PM + select S5P_PM if PM + select S5P_SLEEP if PM help Enable S5PV210 CPU support @@ -59,45 +60,60 @@ config S5PV210_SETUP_FIMC help Common setup code for the camera interfaces. +config S5PV210_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations. + +config S5PV210_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 select S3C_DEV_FB - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 - select S5P_DEV_ONENAND select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_ONENAND help Machine support for the Samsung Aquila target based on S5PC110 SoC config MACH_GONI bool "GONI" select CPU_S5PV210 - select S5P_GPIO_INT select S3C_DEV_FB - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_USB_HSOTG - select S5P_DEV_ONENAND - select SAMSUNG_DEV_KEYPAD select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_FIMC select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_MFC + select S5P_DEV_ONENAND + select S5P_DEV_TV + select S5P_GPIO_INT + select SAMSUNG_DEV_KEYPAD help Machine support for Samsung GONI board S5PC110(MCP) is one of package option of S5PV210 @@ -109,10 +125,14 @@ config MACH_SMDKC110 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT - select SAMSUNG_DEV_IDE select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_IDE + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_MFC + select SAMSUNG_DEV_IDE help Machine support for Samsung SMDKC110 S5PC110(MCP) is one of package option of S5PV210 @@ -132,25 +152,33 @@ config MACH_SMDKV210 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_IDE select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_JPEG + select S5P_DEV_MFC + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_IDE + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_TS help Machine support for Samsung SMDKV210 config MACH_TORBRECK bool "Torbreck" - select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select CPU_S5PV210 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -162,14 +190,10 @@ config MACH_TORBRECK select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_SDHCI + select SAMSUNG_DEV_IDE help Machine support for aESOP Torbreck endmenu -config S5PV210_PM - bool - help - Power Management code common to S5PV210 - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 50907aca006..1c4e41998a1 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -10,31 +10,33 @@ obj-m := obj-n := obj- := -# Core support for S5PV210 system +# Core -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o -obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-y += common.o clock.o + +obj-$(CONFIG_PM) += pm.o + +obj-y += dma.o # machine support obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o -obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o -obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o obj-$(CONFIG_MACH_GONI) += mach-goni.o +obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o +obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o # device support obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-y += setup-i2c0.o obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o -obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o +obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot index ff90aa13bd6..79ece4055b0 100644 --- a/arch/arm/mach-s5pv210/Makefile.boot +++ b/arch/arm/mach-s5pv210/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 2d599499cef..ca463724a3d 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -17,7 +17,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/map.h> @@ -29,14 +29,14 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/s5pv210.h> + +#include "common.h" static unsigned long xtal; static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", - .id = -1, }, .sources = &clk_src_apll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, @@ -45,7 +45,6 @@ static struct clksrc_clk clk_mout_apll = { static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", - .id = -1, }, .sources = &clk_src_epll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, @@ -54,7 +53,6 @@ static struct clksrc_clk clk_mout_epll = { static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", - .id = -1, }, .sources = &clk_src_mpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, @@ -73,7 +71,6 @@ static struct clksrc_sources clkset_armclk = { static struct clksrc_clk clk_armclk = { .clk = { .name = "armclk", - .id = -1, }, .sources = &clkset_armclk, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 }, @@ -83,7 +80,6 @@ static struct clksrc_clk clk_armclk = { static struct clksrc_clk clk_hclk_msys = { .clk = { .name = "hclk_msys", - .id = -1, .parent = &clk_armclk.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 }, @@ -92,7 +88,6 @@ static struct clksrc_clk clk_hclk_msys = { static struct clksrc_clk clk_pclk_msys = { .clk = { .name = "pclk_msys", - .id = -1, .parent = &clk_hclk_msys.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 }, @@ -101,7 +96,6 @@ static struct clksrc_clk clk_pclk_msys = { static struct clksrc_clk clk_sclk_a2m = { .clk = { .name = "sclk_a2m", - .id = -1, .parent = &clk_mout_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, @@ -120,7 +114,6 @@ static struct clksrc_sources clkset_hclk_sys = { static struct clksrc_clk clk_hclk_dsys = { .clk = { .name = "hclk_dsys", - .id = -1, }, .sources = &clkset_hclk_sys, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 }, @@ -130,7 +123,6 @@ static struct clksrc_clk clk_hclk_dsys = { static struct clksrc_clk clk_pclk_dsys = { .clk = { .name = "pclk_dsys", - .id = -1, .parent = &clk_hclk_dsys.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, @@ -139,7 +131,6 @@ static struct clksrc_clk clk_pclk_dsys = { static struct clksrc_clk clk_hclk_psys = { .clk = { .name = "hclk_psys", - .id = -1, }, .sources = &clkset_hclk_sys, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 }, @@ -149,7 +140,6 @@ static struct clksrc_clk clk_hclk_psys = { static struct clksrc_clk clk_pclk_psys = { .clk = { .name = "pclk_psys", - .id = -1, .parent = &clk_hclk_psys.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, @@ -185,40 +175,43 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); } +static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + +static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); +} + static struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", - .id = -1, .rate = 27000000, }; static struct clk clk_sclk_hdmiphy = { .name = "sclk_hdmiphy", - .id = -1, }; static struct clk clk_sclk_usbphy0 = { .name = "sclk_usbphy0", - .id = -1, }; static struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", - .id = -1, }; static struct clk clk_pcmcdclk0 = { .name = "pcmcdclk", - .id = -1, }; static struct clk clk_pcmcdclk1 = { .name = "pcmcdclk", - .id = -1, }; static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", - .id = -1, }; static struct clk *clkset_vpllsrc_list[] = { @@ -234,7 +227,6 @@ static struct clksrc_sources clkset_vpllsrc = { static struct clksrc_clk clk_vpllsrc = { .clk = { .name = "vpll_src", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 7), }, @@ -255,7 +247,6 @@ static struct clksrc_sources clkset_sclk_vpll = { static struct clksrc_clk clk_sclk_vpll = { .clk = { .name = "sclk_vpll", - .id = -1, }, .sources = &clkset_sclk_vpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, @@ -276,7 +267,6 @@ static struct clksrc_sources clkset_moutdmc0src = { static struct clksrc_clk clk_mout_dmc0 = { .clk = { .name = "mout_dmc0", - .id = -1, }, .sources = &clkset_moutdmc0src, .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, @@ -285,7 +275,6 @@ static struct clksrc_clk clk_mout_dmc0 = { static struct clksrc_clk clk_sclk_dmc0 = { .clk = { .name = "sclk_dmc0", - .id = -1, .parent = &clk_mout_dmc0.clk, }, .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 }, @@ -311,182 +300,185 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "pdma", - .id = 0, - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "pdma", - .id = 1, - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 4), - }, { .name = "rot", - .id = -1, .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1<<29), }, { .name = "fimc", - .id = 0, + .devname = "s5pv210-fimc.0", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 24), }, { .name = "fimc", - .id = 1, + .devname = "s5pv210-fimc.1", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 25), }, { .name = "fimc", - .id = 2, + .devname = "s5pv210-fimc.2", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 26), }, { + .name = "jpeg", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "mfc", + .devname = "s5p-mfc", + .parent = &clk_pclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "dac", + .devname = "s5p-sdo", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "vp", + .devname = "s5p-mixer", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hdmi", + .devname = "s5pv210-hdmi", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "hdmiphy", + .devname = "s5pv210-hdmi", + .enable = s5pv210_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "dacphy", + .devname = "s5p-sdo", + .enable = exynos4_clk_dac_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "otg", - .id = -1, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<16), }, { .name = "usb-host", - .id = -1, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<17), }, { .name = "lcd", - .id = -1, .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<0), }, { .name = "cfcon", - .id = 0, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<25), }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<18), - }, { - .name = "hsmmc", - .id = 3, - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<19), - }, { .name = "systimer", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<16), }, { .name = "watchdog", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<22), }, { .name = "rtc", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<15), }, { .name = "i2c", - .id = 0, + .devname = "s3c2440-i2c.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<7), }, { .name = "i2c", - .id = 1, + .devname = "s3c2440-i2c.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 10), }, { .name = "i2c", - .id = 2, + .devname = "s3c2440-i2c.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<9), }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &clk_pclk_psys.clk, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 11), + }, { .name = "spi", - .id = 0, + .devname = "s5pv210-spi.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<12), }, { .name = "spi", - .id = 1, + .devname = "s5pv210-spi.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<13), }, { .name = "spi", - .id = 2, + .devname = "s5pv210-spi.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<14), }, { .name = "timers", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<23), }, { .name = "adc", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<24), }, { .name = "keypad", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<21), }, { .name = "iis", - .id = 0, + .devname = "samsung-i2s.0", .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<4), }, { .name = "iis", - .id = 1, + .devname = "samsung-i2s.1", .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 5), }, { .name = "iis", - .id = 2, + .devname = "samsung-i2s.2", .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 6), }, { .name = "spdif", - .id = -1, .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 0), @@ -496,44 +488,88 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "hclk_imem", - .id = -1, .parent = &clk_hclk_msys.clk, .ctrlbit = (1 << 5), .enable = s5pv210_clk_ip0_ctrl, .ops = &clk_hclk_imem_ops, }, { .name = "uart", - .id = 0, + .devname = "s5pv210-uart.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 17), }, { .name = "uart", - .id = 1, + .devname = "s5pv210-uart.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 18), }, { .name = "uart", - .id = 2, + .devname = "s5pv210-uart.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 19), }, { .name = "uart", - .id = 3, + .devname = "s5pv210-uart.3", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 20), }, { .name = "sromc", - .id = -1, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1 << 26), }, }; +static struct clk clk_hsmmc0 = { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<16), +}; + +static struct clk clk_hsmmc1 = { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<17), +}; + +static struct clk clk_hsmmc2 = { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<18), +}; + +static struct clk clk_hsmmc3 = { + .name = "hsmmc", + .devname = "s3c-sdhci.3", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<19), +}; + +static struct clk clk_pdma0 = { + .name = "pdma0", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 3), +}; + +static struct clk clk_pdma1 = { + .name = "pdma1", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 4), +}; + static struct clk *clkset_uart_list[] = { [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, @@ -579,7 +615,6 @@ static struct clksrc_sources clkset_sclk_dac = { static struct clksrc_clk clk_sclk_dac = { .clk = { .name = "sclk_dac", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 2), }, @@ -590,7 +625,6 @@ static struct clksrc_clk clk_sclk_dac = { static struct clksrc_clk clk_sclk_pixel = { .clk = { .name = "sclk_pixel", - .id = -1, .parent = &clk_sclk_vpll.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4}, @@ -609,7 +643,6 @@ static struct clksrc_sources clkset_sclk_hdmi = { static struct clksrc_clk clk_sclk_hdmi = { .clk = { .name = "sclk_hdmi", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 0), }, @@ -627,6 +660,23 @@ static struct clksrc_sources clkset_sclk_mixer = { .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), }; +static struct clksrc_clk clk_sclk_mixer = { + .clk = { + .name = "sclk_mixer", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 1), + }, + .sources = &clkset_sclk_mixer, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk *sclk_tv[] = { + &clk_sclk_dac, + &clk_sclk_pixel, + &clk_sclk_hdmi, + &clk_sclk_mixer, +}; + static struct clk *clkset_sclk_audio0_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_pcmcdclk0, @@ -647,7 +697,7 @@ static struct clksrc_sources clkset_sclk_audio0 = { static struct clksrc_clk clk_sclk_audio0 = { .clk = { .name = "sclk_audio", - .id = 0, + .devname = "soc-audio.0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 24), }, @@ -676,7 +726,7 @@ static struct clksrc_sources clkset_sclk_audio1 = { static struct clksrc_clk clk_sclk_audio1 = { .clk = { .name = "sclk_audio", - .id = 1, + .devname = "soc-audio.1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 25), }, @@ -705,7 +755,7 @@ static struct clksrc_sources clkset_sclk_audio2 = { static struct clksrc_clk clk_sclk_audio2 = { .clk = { .name = "sclk_audio", - .id = 2, + .devname = "soc-audio.2", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 26), }, @@ -725,48 +775,12 @@ static struct clksrc_sources clkset_sclk_spdif = { .nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list), }; -static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate) -{ - struct clk *pclk; - int ret; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - ret = pclk->ops->set_rate(pclk, rate); - clk_put(pclk); - - return ret; -} - -static unsigned long s5pv210_spdif_get_rate(struct clk *clk) -{ - struct clk *pclk; - int rate; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - rate = pclk->ops->get_rate(clk); - clk_put(pclk); - - return rate; -} - -static struct clk_ops s5pv210_sclk_spdif_ops = { - .set_rate = s5pv210_spdif_set_rate, - .get_rate = s5pv210_spdif_get_rate, -}; - static struct clksrc_clk clk_sclk_spdif = { .clk = { .name = "sclk_spdif", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 27), - .ops = &s5pv210_sclk_spdif_ops, + .ops = &s5p_sclk_spdif_ops, }, .sources = &clkset_sclk_spdif, .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, @@ -793,7 +807,6 @@ static struct clksrc_clk clksrcs[] = { { .clk = { .name = "sclk_dmc", - .id = -1, }, .sources = &clkset_group1, .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, @@ -801,64 +814,14 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_onenand", - .id = -1, }, .sources = &clkset_sclk_onenand, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 }, .reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 }, }, { .clk = { - .name = "uclk1", - .id = 0, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = 1, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 13), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = 2, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 14), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = 3, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 15), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_mixer", - .id = -1, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 1), - }, - .sources = &clkset_sclk_mixer, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, - }, { - .clk = { .name = "sclk_fimc", - .id = 0, + .devname = "s5pv210-fimc.0", .enable = s5pv210_clk_mask1_ctrl, .ctrlbit = (1 << 2), }, @@ -868,7 +831,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 1, + .devname = "s5pv210-fimc.1", .enable = s5pv210_clk_mask1_ctrl, .ctrlbit = (1 << 3), }, @@ -878,7 +841,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 2, + .devname = "s5pv210-fimc.2", .enable = s5pv210_clk_mask1_ctrl, .ctrlbit = (1 << 4), }, @@ -887,8 +850,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .id = 0, + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -897,8 +859,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .id = 1, + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, @@ -908,7 +869,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimd", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 5), }, @@ -917,48 +877,8 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_mmc", - .id = 0, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 1, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 9), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 2, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 10), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 3, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 11), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, - }, { - .clk = { .name = "sclk_mfc", - .id = -1, + .devname = "s5p-mfc", .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 16), }, @@ -968,7 +888,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_g2d", - .id = -1, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 12), }, @@ -978,7 +897,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_g3d", - .id = -1, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 8), }, @@ -988,7 +906,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_csis", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 6), }, @@ -997,28 +914,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_spi", - .id = 0, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .id = 1, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 17), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 }, - }, { - .clk = { .name = "sclk_pwi", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 29), }, @@ -1028,7 +924,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_pwm", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 19), }, @@ -1038,6 +933,149 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 13), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.2", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 14), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.3", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 15), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 9), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 10), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc3 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.3", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 11), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s5pv210-spi.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 }, + }; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s5pv210-spi.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 17), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 }, + }; + + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart0, + &clk_sclk_uart1, + &clk_sclk_uart2, + &clk_sclk_uart3, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, + &clk_sclk_mmc3, + &clk_sclk_spi0, + &clk_sclk_spi1, +}; + +static struct clk *clk_cdev[] = { + &clk_hsmmc0, + &clk_hsmmc1, + &clk_hsmmc2, + &clk_hsmmc3, + &clk_pdma0, + &clk_pdma1, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1053,9 +1091,6 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk_psys, &clk_vpllsrc, &clk_sclk_vpll, - &clk_sclk_dac, - &clk_sclk_pixel, - &clk_sclk_hdmi, &clk_mout_dmc0, &clk_sclk_dmc0, &clk_sclk_audio0, @@ -1140,6 +1175,61 @@ static struct clk_ops s5pv210_epll_ops = { .get_rate = s5p_epll_get_rate, }; +static u32 vpll_div[][5] = { + { 54000000, 3, 53, 3, 0 }, + { 108000000, 3, 53, 2, 0 }, +}; + +static unsigned long s5pv210_vpll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int vpll_con; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + vpll_con = __raw_readl(S5P_VPLL_CON); + vpll_con &= ~(0x1 << 27 | \ + PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT | \ + PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT | \ + PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { + if (vpll_div[i][0] == rate) { + vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT; + vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT; + vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT; + vpll_con |= vpll_div[i][4] << 27; + break; + } + } + + if (i == ARRAY_SIZE(vpll_div)) { + printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(vpll_con, S5P_VPLL_CON); + + /* Wait for VPLL lock */ + while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT))) + continue; + + clk->rate = rate; + return 0; +} +static struct clk_ops s5pv210_vpll_ops = { + .get_rate = s5pv210_vpll_get_rate, + .set_rate = s5pv210_vpll_set_rate, +}; + void __init_or_cpufreq s5pv210_setup_clocks(void) { struct clk *xtal_clk; @@ -1188,6 +1278,7 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) clk_fout_apll.ops = &clk_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; + clk_fout_vpll.ops = &s5pv210_vpll_ops; clk_fout_vpll.rate = vpll; printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", @@ -1224,6 +1315,27 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk2, }; +static struct clk_lookup s5pv210_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), + CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk), + CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk), + CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk), + CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.0", &clk_hsmmc3), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), + CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), + CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), +}; + void __init s5pv210_register_clocks(void) { int ptr; @@ -1233,11 +1345,21 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) + s3c_register_clksrc(sclk_tv[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup)); + + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) + s3c_disable_clocks(clk_cdev[ptr], 1); - s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/common.c index 61e6c24b90a..7024dcd0e40 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/common.c @@ -1,12 +1,13 @@ -/* linux/arch/arm/mach-s5pv210/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * + * Common Codes for S5PV210 + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ #include <linux/kernel.h> #include <linux/types.h> @@ -17,35 +18,81 @@ #include <linux/module.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/device.h> +#include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/proc-fns.h> #include <mach/map.h> #include <mach/regs-clock.h> #include <plat/cpu.h> -#include <plat/devs.h> #include <plat/clock.h> -#include <plat/fb-core.h> -#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/ata-core.h> +#include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/keypad-core.h> -#include <plat/sdhci.h> -#include <plat/reset.h> +#include <plat/pwm-core.h> +#include <plat/tv-core.h> +#include <plat/spi-core.h> + +#include "common.h" + +static const char name_s5pv210[] = "S5PV210/S5PC110"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = S5PV210_CPU_ID, + .idmask = S5PV210_CPU_MASK, + .map_io = s5pv210_map_io, + .init_clocks = s5pv210_init_clocks, + .init_uarts = s5pv210_init_uarts, + .init = s5pv210_init, + .name = name_s5pv210, + }, +}; /* Initial IO mappings */ static struct map_desc s5pv210_iodesc[] __initdata = { { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(S5PV210_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S5PV210_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S5PV210_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S5PV210_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5PV210_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SYSTIMER, .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER), .length = SZ_4K, @@ -98,35 +145,65 @@ static struct map_desc s5pv210_iodesc[] __initdata = { } }; -static void s5pv210_idle(void) +void s5pv210_restart(enum reboot_mode mode, const char *cmd) { - if (!need_resched()) - cpu_do_idle(); + __raw_writel(0x1, S5P_SWRESET); +} - local_irq_enable(); +static struct samsung_pwm_variant s5pv210_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = (1 << 5), +}; + +void __init samsung_set_timer_source(unsigned int event, unsigned int source) +{ + s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); } -static void s5pv210_sw_reset(void) +void __init samsung_timer_init(void) { - __raw_writel(0x1, S5P_SWRESET); + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, + IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, + }; + + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &s5pv210_pwm_variant); } -/* s5pv210_map_io +/* + * s5pv210_map_io * * register the standard cpu IO areas -*/ + */ -void __init s5pv210_map_io(void) +void __init s5pv210_init_io(struct map_desc *mach_desc, int size) { + /* initialize the io descriptors we need for initialization */ iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + /* detect cpu id and rev. */ + s5p_init_cpu(S5P_VA_CHIPID); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); + + samsung_pwm_set_platdata(&s5pv210_pwm_variant); +} + +void __init s5pv210_map_io(void) +{ /* initialise device information early */ s5pv210_default_sdhci0(); s5pv210_default_sdhci1(); s5pv210_default_sdhci2(); s5pv210_default_sdhci3(); - s3c_adc_setname("s3c64xx-adc"); + s3c_adc_setname("samsung-adc-v3"); s3c_cfcon_setname("s5pv210-pata"); @@ -143,6 +220,11 @@ void __init s5pv210_map_io(void) /* Use s5pv210-keypad instead of samsung-keypad */ samsung_keypad_setname("s5pv210-keypad"); + + /* setup TV devices */ + s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) @@ -168,30 +250,30 @@ void __init s5pv210_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -struct sysdev_class s5pv210_sysclass = { - .name = "s5pv210-core", +struct bus_type s5pv210_subsys = { + .name = "s5pv210-core", + .dev_name = "s5pv210-core", }; -static struct sys_device s5pv210_sysdev = { - .cls = &s5pv210_sysclass, +static struct device s5pv210_dev = { + .bus = &s5pv210_subsys, }; static int __init s5pv210_core_init(void) { - return sysdev_class_register(&s5pv210_sysclass); + return subsys_system_register(&s5pv210_subsys, NULL); } - core_initcall(s5pv210_core_init); int __init s5pv210_init(void) { printk(KERN_INFO "S5PV210: Initializing architecture\n"); + return device_register(&s5pv210_dev); +} - /* set idle function */ - pm_idle = s5pv210_idle; - - /* set sw_reset function */ - s5p_reset_hook = s5pv210_sw_reset; +/* uart registration process */ - return sysdev_register(&s5pv210_sysdev); +void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h new file mode 100644 index 00000000000..fe1beb54e54 --- /dev/null +++ b/arch/arm/mach-s5pv210/common.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S5PV210 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H +#define __ARCH_ARM_MACH_S5PV210_COMMON_H + +#include <linux/reboot.h> + +void s5pv210_init_io(struct map_desc *mach_desc, int size); +void s5pv210_init_irq(void); + +void s5pv210_register_clocks(void); +void s5pv210_setup_clocks(void); + +void s5pv210_restart(enum reboot_mode mode, const char *cmd); + +extern int s5pv210_init(void); +extern void s5pv210_map_io(void); +extern void s5pv210_init_clocks(int xtal); +extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c deleted file mode 100644 index 22046e2f53c..00000000000 --- a/arch/arm/mach-s5pv210/cpufreq.c +++ /dev/null @@ -1,483 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/cpufreq.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * CPU frequency scaling for S5PC110/S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/cpufreq.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -static struct clk *cpu_clk; -static struct clk *dmc0_clk; -static struct clk *dmc1_clk; -static struct cpufreq_freqs freqs; - -/* APLL M,P,S values for 1G/800Mhz */ -#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) -#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) - -/* - * DRAM configurations to calculate refresh counter for changing - * frequency of memory. - */ -struct dram_conf { - unsigned long freq; /* HZ */ - unsigned long refresh; /* DRAM refresh counter * 1000 */ -}; - -/* DRAM configuration (DMC0 and DMC1) */ -static struct dram_conf s5pv210_dram_conf[2]; - -enum perf_level { - L0, L1, L2, L3, L4, -}; - -enum s5pv210_mem_type { - LPDDR = 0x1, - LPDDR2 = 0x2, - DDR2 = 0x4, -}; - -enum s5pv210_dmc_port { - DMC0 = 0, - DMC1, -}; - -static struct cpufreq_frequency_table s5pv210_freq_table[] = { - {L0, 1000*1000}, - {L1, 800*1000}, - {L2, 400*1000}, - {L3, 200*1000}, - {L4, 100*1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static u32 clkdiv_val[5][11] = { - /* - * Clock divider value for following - * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, - * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, - * ONEDRAM, MFC, G3D } - */ - - /* L0 : [1000/200/100][166/83][133/66][200/200] */ - {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L1 : [800/200/100][166/83][133/66][200/200] */ - {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L2 : [400/200/100][166/83][133/66][200/200] */ - {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L3 : [200/200/100][166/83][133/66][200/200] */ - {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L4 : [100/100/100][83/83][66/66][100/100] */ - {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, -}; - -/* - * This function set DRAM refresh counter - * accoriding to operating frequency of DRAM - * ch: DMC port number 0 or 1 - * freq: Operating frequency of DRAM(KHz) - */ -static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) -{ - unsigned long tmp, tmp1; - void __iomem *reg = NULL; - - if (ch == DMC0) - reg = (S5P_VA_DMC0 + 0x30); - else if (ch == DMC1) - reg = (S5P_VA_DMC1 + 0x30); - else - printk(KERN_ERR "Cannot find DMC port\n"); - - /* Find current DRAM frequency */ - tmp = s5pv210_dram_conf[ch].freq; - - do_div(tmp, freq); - - tmp1 = s5pv210_dram_conf[ch].refresh; - - do_div(tmp1, tmp); - - __raw_writel(tmp1, reg); -} - -int s5pv210_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); -} - -unsigned int s5pv210_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - -static int s5pv210_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned long reg; - unsigned int index, priv_index; - unsigned int pll_changing = 0; - unsigned int bus_speed_changing = 0; - - freqs.old = s5pv210_getspeed(0); - - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - freqs.new = s5pv210_freq_table[index].frequency; - freqs.cpu = 0; - - if (freqs.new == freqs.old) - return 0; - - /* Finding current running level index */ - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - freqs.old, relation, &priv_index)) - return -EINVAL; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (freqs.new > freqs.old) { - /* Voltage up: will be implemented */ - } - - /* Check if there need to change PLL */ - if ((index == L0) || (priv_index == L0)) - pll_changing = 1; - - /* Check if there need to change System bus clock */ - if ((index == L4) || (priv_index == L4)) - bus_speed_changing = 1; - - if (bus_speed_changing) { - /* - * Reconfigure DRAM refresh counter value for minimum - * temporary clock while changing divider. - * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 - */ - if (pll_changing) - s5pv210_set_refresh(DMC1, 83000); - else - s5pv210_set_refresh(DMC1, 100000); - - s5pv210_set_refresh(DMC0, 83000); - } - - /* - * APLL should be changed in this level - * APLL -> MPLL(for stable transition) -> APLL - * Some clock source's clock API are not prepared. - * Do not use clock API in below code. - */ - if (pll_changing) { - /* - * 1. Temporary Change divider for MFC and G3D - * SCLKA2M(200/1=200)->(200/4=50)Mhz - */ - reg = __raw_readl(S5P_CLK_DIV2); - reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); - reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | - (3 << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); - - /* For MFC, G3D dividing */ - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & ((1 << 16) | (1 << 17))); - - /* - * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX - * (200/4=50)->(667/4=166)Mhz - */ - reg = __raw_readl(S5P_CLK_SRC2); - reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); - reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | - (1 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT1); - } while (reg & ((1 << 7) | (1 << 3))); - - /* - * 3. DMC1 refresh count for 133Mhz if (index == L4) is - * true refresh counter is already programed in upper - * code. 0x287@83Mhz - */ - if (!bus_speed_changing) - s5pv210_set_refresh(DMC1, 133000); - - /* 4. SCLKAPLL -> SCLKMPLL */ - reg = __raw_readl(S5P_CLK_SRC0); - reg &= ~(S5P_CLKSRC0_MUX200_MASK); - reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT0); - } while (reg & (0x1 << 18)); - - } - - /* Change divider */ - reg = __raw_readl(S5P_CLK_DIV0); - - reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | - S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | - S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | - S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); - - reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | - (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | - (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | - (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | - (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | - (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | - (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | - (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); - - __raw_writel(reg, S5P_CLK_DIV0); - - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & 0xff); - - /* ARM MCS value changed */ - reg = __raw_readl(S5P_ARM_MCS_CON); - reg &= ~0x3; - if (index >= L3) - reg |= 0x3; - else - reg |= 0x1; - - __raw_writel(reg, S5P_ARM_MCS_CON); - - if (pll_changing) { - /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ - __raw_writel(0x2cf, S5P_APLL_LOCK); - - /* - * 6. Turn on APLL - * 6-1. Set PMS values - * 6-2. Wait untile the PLL is locked - */ - if (index == L0) - __raw_writel(APLL_VAL_1000, S5P_APLL_CON); - else - __raw_writel(APLL_VAL_800, S5P_APLL_CON); - - do { - reg = __raw_readl(S5P_APLL_CON); - } while (!(reg & (0x1 << 29))); - - /* - * 7. Change souce clock from SCLKMPLL(667Mhz) - * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX - * (667/4=166)->(200/4=50)Mhz - */ - reg = __raw_readl(S5P_CLK_SRC2); - reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); - reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | - (0 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT1); - } while (reg & ((1 << 7) | (1 << 3))); - - /* - * 8. Change divider for MFC and G3D - * (200/4=50)->(200/1=200)Mhz - */ - reg = __raw_readl(S5P_CLK_DIV2); - reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); - reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | - (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); - - /* For MFC, G3D dividing */ - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & ((1 << 16) | (1 << 17))); - - /* 9. Change MPLL to APLL in MSYS_MUX */ - reg = __raw_readl(S5P_CLK_SRC0); - reg &= ~(S5P_CLKSRC0_MUX200_MASK); - reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT0); - } while (reg & (0x1 << 18)); - - /* - * 10. DMC1 refresh counter - * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c - * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 - */ - if (!bus_speed_changing) - s5pv210_set_refresh(DMC1, 200000); - } - - /* - * L4 level need to change memory bus speed, hence onedram clock divier - * and memory refresh parameter should be changed - */ - if (bus_speed_changing) { - reg = __raw_readl(S5P_CLK_DIV6); - reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; - reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); - __raw_writel(reg, S5P_CLK_DIV6); - - do { - reg = __raw_readl(S5P_CLKDIV_STAT1); - } while (reg & (1 << 15)); - - /* Reconfigure DRAM refresh counter value */ - if (index != L4) { - /* - * DMC0 : 166Mhz - * DMC1 : 200Mhz - */ - s5pv210_set_refresh(DMC0, 166000); - s5pv210_set_refresh(DMC1, 200000); - } else { - /* - * DMC0 : 83Mhz - * DMC1 : 100Mhz - */ - s5pv210_set_refresh(DMC0, 83000); - s5pv210_set_refresh(DMC1, 100000); - } - } - - if (freqs.new < freqs.old) { - /* Voltage down: will be implemented */ - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - printk(KERN_DEBUG "Perf changed[L%d]\n", index); - - return 0; -} - -#ifdef CONFIG_PM -static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy) -{ - return 0; -} - -static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - -static int check_mem_type(void __iomem *dmc_reg) -{ - unsigned long val; - - val = __raw_readl(dmc_reg + 0x4); - val = (val & (0xf << 8)); - - return val >> 8; -} - -static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) -{ - unsigned long mem_type; - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - dmc0_clk = clk_get(NULL, "sclk_dmc0"); - if (IS_ERR(dmc0_clk)) { - clk_put(cpu_clk); - return PTR_ERR(dmc0_clk); - } - - dmc1_clk = clk_get(NULL, "hclk_msys"); - if (IS_ERR(dmc1_clk)) { - clk_put(dmc0_clk); - clk_put(cpu_clk); - return PTR_ERR(dmc1_clk); - } - - if (policy->cpu != 0) - return -EINVAL; - - /* - * check_mem_type : This driver only support LPDDR & LPDDR2. - * other memory type is not supported. - */ - mem_type = check_mem_type(S5P_VA_DMC0); - - if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { - printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); - return -EINVAL; - } - - /* Find current refresh counter and frequency each DMC */ - s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000); - s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); - - s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); - s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); - - policy->cur = policy->min = policy->max = s5pv210_getspeed(0); - - cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); - - policy->cpuinfo.transition_latency = 40000; - - return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); -} - -static struct cpufreq_driver s5pv210_driver = { - .flags = CPUFREQ_STICKY, - .verify = s5pv210_verify_speed, - .target = s5pv210_target, - .get = s5pv210_getspeed, - .init = s5pv210_cpu_init, - .name = "s5pv210", -#ifdef CONFIG_PM - .suspend = s5pv210_cpufreq_suspend, - .resume = s5pv210_cpufreq_resume, -#endif -}; - -static int __init s5pv210_cpufreq_init(void) -{ - return cpufreq_register_driver(&s5pv210_driver); -} - -late_initcall(s5pv210_cpufreq_init); diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 8d58f192624..2d67361ef43 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -13,16 +13,13 @@ #include <linux/gpio.h> #include <plat/gpio-cfg.h> -#include <plat/audio.h> +#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> -static const char *rclksrc[] = { - [0] = "busclk", - [1] = "i2sclk", -}; +#define S5PV210_AUDSS_INT_MEM (0xC0000000) static int s5pv210_cfg_i2s(struct platform_device *pdev) { @@ -51,32 +48,16 @@ static struct s3c_audio_pdata i2sv5_pdata = { .i2s = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc, + .idma_addr = S5PV210_AUDSS_INT_MEM, }, }, }; static struct resource s5pv210_iis0_resource[] = { - [0] = { - .start = S5PV210_PA_IIS0, - .end = S5PV210_PA_IIS0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_IIS0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), + [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), }; struct platform_device s5pv210_device_iis0 = { @@ -89,36 +70,14 @@ struct platform_device s5pv210_device_iis0 = { }, }; -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "audio-bus", -}; - static struct s3c_audio_pdata i2sv3_pdata = { .cfg_gpio = s5pv210_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, }; static struct resource s5pv210_iis1_resource[] = { - [0] = { - .start = S5PV210_PA_IIS1, - .end = S5PV210_PA_IIS1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_IIS1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), }; struct platform_device s5pv210_device_iis1 = { @@ -132,21 +91,9 @@ struct platform_device s5pv210_device_iis1 = { }; static struct resource s5pv210_iis2_resource[] = { - [0] = { - .start = S5PV210_PA_IIS2, - .end = S5PV210_PA_IIS2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S2_TX, - .end = DMACH_I2S2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S2_RX, - .end = DMACH_I2S2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_IIS2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), }; struct platform_device s5pv210_device_iis2 = { @@ -186,21 +133,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = { }; static struct resource s5pv210_pcm0_resource[] = { - [0] = { - .start = S5PV210_PA_PCM0, - .end = S5PV210_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_PCM0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), }; struct platform_device s5pv210_device_pcm0 = { @@ -214,21 +149,9 @@ struct platform_device s5pv210_device_pcm0 = { }; static struct resource s5pv210_pcm1_resource[] = { - [0] = { - .start = S5PV210_PA_PCM1, - .end = S5PV210_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_PCM1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), }; struct platform_device s5pv210_device_pcm1 = { @@ -242,21 +165,9 @@ struct platform_device s5pv210_device_pcm1 = { }; static struct resource s5pv210_pcm2_resource[] = { - [0] = { - .start = S5PV210_PA_PCM2, - .end = S5PV210_PA_PCM2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM2_TX, - .end = DMACH_PCM2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM2_RX, - .end = DMACH_PCM2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_PCM2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM2_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM2_RX), }; struct platform_device s5pv210_device_pcm2 = { @@ -277,31 +188,11 @@ static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) } static struct resource s5pv210_ac97_resource[] = { - [0] = { - .start = S5PV210_PA_AC97, - .end = S5PV210_PA_AC97 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_AC97_PCMOUT, - .end = DMACH_AC97_PCMOUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_AC97_PCMIN, - .end = DMACH_AC97_PCMIN, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_AC97_MICIN, - .end = DMACH_AC97_MICIN, - .flags = IORESOURCE_DMA, - }, - [4] = { - .start = IRQ_AC97, - .end = IRQ_AC97, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_AC97, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), + [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), + [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), + [4] = DEFINE_RES_IRQ(IRQ_AC97), }; static struct s3c_audio_pdata s3c_ac97_pdata = { @@ -332,16 +223,8 @@ static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev) } static struct resource s5pv210_spdif_resource[] = { - [0] = { - .start = S5PV210_PA_SPDIF, - .end = S5PV210_PA_SPDIF + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPDIF, - .end = DMACH_SPDIF, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_SPDIF, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPDIF), }; static struct s3c_audio_pdata samsung_spdif_pdata = { diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c deleted file mode 100644 index e3249a47e3b..00000000000 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ /dev/null @@ -1,173 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5PV210_SPI_SRCCLK_PCLK] = "pclk", - [S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5PV210_GPB(0); - break; - - case 1: - base = S5PV210_GPB(4); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgall_range(base, 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - - return 0; -} - -static struct resource s5pv210_spi0_resource[] = { - [0] = { - .start = S5PV210_PA_SPI0, - .end = S5PV210_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5pv210_spi0_pdata = { - .cfg_gpio = s5pv210_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .high_speed = 1, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv210_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_spi0_resource), - .resource = s5pv210_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_spi0_pdata, - }, -}; - -static struct resource s5pv210_spi1_resource[] = { - [0] = { - .start = S5PV210_PA_SPI1, - .end = S5PV210_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5pv210_spi1_pdata = { - .cfg_gpio = s5pv210_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, -}; - -struct platform_device s5pv210_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_spi1_resource), - .resource = s5pv210_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_spi1_pdata, - }, -}; - -void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5pv210_spi0_pdata; - break; - case 1: - pd = &s5pv210_spi1_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 497d3439a14..b8337e248b0 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pv210/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,151 +21,109 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> +#include <mach/dma.h> -#include <plat/s3c-pl330-pdata.h> - -static u64 dma_dmamask = DMA_BIT_MASK(32); - -static struct resource s5pv210_pdma0_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, - }, +static u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_MAX, + DMACH_PWM, + DMACH_SPDIF, }; -static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_MAX, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +static struct dma_pl330_platdata s5pv210_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri_id = pdma0_peri, }; -static struct platform_device s5pv210_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), - .resource = s5pv210_pdma0_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma0_pdata, - }, -}; +static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, + S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata); -static struct resource s5pv210_pdma1_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, +static u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, + DMACH_PCM2_RX, + DMACH_PCM2_TX, }; -static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_PCM2_RX, - [31] = DMACH_PCM2_TX, - }, +static struct dma_pl330_platdata s5pv210_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri_id = pdma1_peri, }; -static struct platform_device s5pv210_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), - .resource = s5pv210_pdma1_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma1_pdata, - }, -}; - -static struct platform_device *s5pv210_dmacs[] __initdata = { - &s5pv210_device_pdma0, - &s5pv210_device_pdma1, -}; +static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, + S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata); static int __init s5pv210_dma_init(void) { - platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs)); + dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); + amba_device_register(&s5pv210_pdma0_device, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); + amba_device_register(&s5pv210_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 169fe654a59..30b511a580a 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 @@ -38,4 +38,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h index 81209eb1409..201842a3769 100644 --- a/arch/arm/mach-s5pv210/include/mach/dma.h +++ b/arch/arm/mach-s5pv210/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S deleted file mode 100644 index 3aa41ac59f0..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Low-level IRQ helper macros for the Samsung S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic3 - addeq \tmp, \base, #(VA_VIC3 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index a5a1e331f8e..6c8b903c02e 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ @@ -142,6 +137,4 @@ enum s5p_gpio_number { #define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h deleted file mode 100644 index 5ab9d560bc8..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/io.h - * - * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/io.h - * - * Default IO routines for S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H __FILE__ - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index b9f9ec33384..5e0de3a31f3 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -56,7 +56,7 @@ #define IRQ_SPI2 S5P_IRQ_VIC1(17) #define IRQ_IRDA S5P_IRQ_VIC1(18) #define IRQ_IIC2 S5P_IRQ_VIC1(19) -#define IRQ_IIC3 S5P_IRQ_VIC1(20) +#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20) #define IRQ_HSIRX S5P_IRQ_VIC1(21) #define IRQ_HSITX S5P_IRQ_VIC1(22) #define IRQ_UHOST S5P_IRQ_VIC1(23) @@ -86,7 +86,7 @@ #define IRQ_HDMI S5P_IRQ_VIC2(12) #define IRQ_IIC1 S5P_IRQ_VIC2(13) #define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_SDO S5P_IRQ_VIC2(15) #define IRQ_I2S0 S5P_IRQ_VIC2(16) #define IRQ_I2S1 S5P_IRQ_VIC2(17) #define IRQ_I2S2 S5P_IRQ_VIC2(18) diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 1dd58836fd4..763929aca52 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -59,6 +59,8 @@ #define S5PV210_PA_CFCON 0xE8200000 +#define S5PV210_PA_MFC 0xF1700000 + #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) #define S5PV210_PA_HSOTG 0xEC000000 @@ -88,6 +90,14 @@ #define S5PV210_PA_FIMC1 0xFB300000 #define S5PV210_PA_FIMC2 0xFB400000 +#define S5PV210_PA_JPEG 0xFB600000 + +#define S5PV210_PA_SDO 0xF9000000 +#define S5PV210_PA_VP 0xF9100000 +#define S5PV210_PA_MIXER 0xF9200000 +#define S5PV210_PA_HDMI 0xFA100000 +#define S5PV210_PA_IIC_HDMIPHY 0xFA900000 + /* Compatibiltiy Defines */ #define S3C_PA_FB S5PV210_PA_FB @@ -101,12 +111,22 @@ #define S3C_PA_RTC S5PV210_PA_RTC #define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG #define S3C_PA_WDT S5PV210_PA_WATCHDOG +#define S3C_PA_SPI0 S5PV210_PA_SPI0 +#define S3C_PA_SPI1 S5PV210_PA_SPI1 #define S5P_PA_CHIPID S5PV210_PA_CHIPID #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 #define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S5P_PA_MFC S5PV210_PA_MFC +#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY + +#define S5P_PA_SDO S5PV210_PA_SDO +#define S5P_PA_VP S5PV210_PA_VP +#define S5P_PA_MIXER S5PV210_PA_MIXER +#define S5P_PA_HDMI S5PV210_PA_HDMI + #define S5P_PA_ONENAND S5PC110_PA_ONENAND #define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA #define S5P_PA_SDRAM S5PV210_PA_SDRAM @@ -114,9 +134,12 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5P_PA_TIMER S5PV210_PA_TIMER +#define S5P_PA_JPEG S5PV210_PA_JPEG + #define SAMSUNG_PA_ADC S5PV210_PA_ADC #define SAMSUNG_PA_CFCON S5PV210_PA_CFCON #define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD +#define SAMSUNG_PA_TIMER S5PV210_PA_TIMER /* UART */ diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h index 7b5fcf0da0c..2d3cfa221d5 100644 --- a/arch/arm/mach-s5pv210/include/mach/memory.h +++ b/arch/arm/mach-s5pv210/include/mach/memory.h @@ -14,7 +14,6 @@ #define __ASM_ARCH_MEMORY_H #define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) /* * Sparsemem support diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h index e8d394f8b05..eba8aea63ed 100644 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -41,3 +41,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, { /* nothing here yet */ } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h deleted file mode 100644 index f8a9f1b330e..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5PV210 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 78925c51634..e345584d4c3 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -144,12 +144,9 @@ #define S5P_OTHERS S5P_CLKREG(0xE000) #define S5P_OM_STAT S5P_CLKREG(0xE100) +#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804) #define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) -#define S5P_DAC_CONTROL S5P_CLKREG(0xE810) -#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814) -#define S5P_MIPI_DPHY_ENABLE (1 << 0) -#define S5P_MIPI_DPHY_SRESETN (1 << 1) -#define S5P_MIPI_DPHY_MRESETN (1 << 2) +#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810) #define S5P_INFORM0 S5P_CLKREG(0xF000) #define S5P_INFORM1 S5P_CLKREG(0xF004) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-fb.h b/arch/arm/mach-s5pv210/include/mach/regs-fb.h deleted file mode 100644 index 60d992989bd..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-fb.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * Dummy framebuffer to allow build for the moment. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MACH_REGS_FB_H -#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ - -#include <plat/regs-fb-v4.h> - -static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) -{ - return 0x2400 + (window * 256 *4 ) + reg; -} - -#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h index 5c3b104a7c8..d8bc1e6c7aa 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-irq.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_REGS_IRQ_H #define __ASM_ARCH_REGS_IRQ_H __FILE__ -#include <asm/hardware/vic.h> #include <mach/map.h> #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h deleted file mode 100644 index 26691d39d0f..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-s5pv210/include/mach/regs-sys.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - System registers definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) -#define S5PV210_USB_PHY0_EN (1 << 0) -#define S5PV210_USB_PHY1_EN (1 << 1) - -/* compatibility defines for s3c-hsotg driver */ -#define S3C64XX_OTHERS S5PV210_USB_PHY_CON -#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h deleted file mode 100644 index 02acded5f73..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5PV210_PLAT_SPI_CLKS_H -#define __S5PV210_PLAT_SPI_CLKS_H __FILE__ - -#define S5PV210_SPI_SRCCLK_PCLK 0 -#define S5PV210_SPI_SRCCLK_SCLK 1 - -#endif /* __S5PV210_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h deleted file mode 100644 index af8a200b213..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include <plat/system-reset.h> - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h deleted file mode 100644 index 7993b3603cc..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/tick.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/tick.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/tick.h - * - * S5PV210 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h deleted file mode 100644 index 73dc85496a8..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * S5PV210 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h deleted file mode 100644 index 08ff2fda1fb..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h deleted file mode 100644 index a6c659d68a5..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * S5PV210 vmalloc definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H __FILE__ - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c deleted file mode 100644 index 4865ae2c475..00000000000 --- a/arch/arm/mach-s5pv210/init.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5pv210.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5pv210_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 4e1d8ff5ae5..cc37edacda2 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -27,19 +28,19 @@ #include <asm/setup.h> #include <asm/mach-types.h> +#include <video/samsung_fimd.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-fb.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> #include <plat/fimc-core.h> #include <plat/sdhci.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> + +#include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -94,38 +95,34 @@ static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win aquila_fb_win0 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 3, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 2, - .xres = 480, - .yres = 800, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, }; static struct s3c_fb_pd_win aquila_fb_win1 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 3, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 2, - .xres = 480, - .yres = 800, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, +}; + +static struct fb_videomode aquila_lcd_timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, }; static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { .win[0] = &aquila_fb_win0, .win[1] = &aquila_fb_win1, + .vtiming = &aquila_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, @@ -380,12 +377,8 @@ static struct max8998_platform_data aquila_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage1 = 1200000, - .buck1_voltage2 = 1200000, - .buck1_voltage3 = 1200000, - .buck1_voltage4 = 1200000, - .buck2_voltage1 = 1200000, - .buck2_voltage2 = 1200000, + .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, + .buck2_voltage = { 1200000, 1200000 }, }; #endif @@ -482,8 +475,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ @@ -595,18 +588,24 @@ static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = { static void aquila_setup_sdhci(void) { - gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN"); - gpio_direction_output(AQUILA_EXT_FLASH_EN, 1); + gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN"); s3c_sdhci0_set_platdata(&aquila_hsmmc0_data); s3c_sdhci1_set_platdata(&aquila_hsmmc1_data); s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); }; +/* Audio device */ +static struct platform_device aquila_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *aquila_devices[] __initdata = { &aquila_i2c_gpio_pmic, &aquila_i2c_gpio5, &aquila_device_gpiokeys, + &aquila_device_audio, &s3c_device_fb, &s5p_device_onenand, &s3c_device_hsmmc0, @@ -615,6 +614,7 @@ static struct platform_device *aquila_devices[] __initdata = { &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5p_device_fimc_md, &s5pv210_device_iis0, &wm8994_fixed_voltage0, &wm8994_fixed_voltage1, @@ -644,10 +644,10 @@ static void __init aquila_sound_init(void) static void __init aquila_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init aquila_machine_init(void) @@ -678,9 +678,10 @@ MACHINE_START(AQUILA, "Aquila") /* Maintainers: Marek Szyprowski <m.szyprowski@samsung.com> Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, - .timer = &s5p_timer, + .init_time = samsung_timer_init, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 31d5aa76975..c1ce921c408 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -25,28 +26,31 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <linux/interrupt.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> #include <asm/mach-types.h> +#include <video/samsung_fimd.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-fb.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/clock.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> +#include <plat/mfc.h> + +#include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -97,25 +101,29 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win goni_fb_win0 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, .virtual_x = 480, .virtual_y = 2 * 800, }; +static struct fb_videomode goni_lcd_timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, +}; + static struct s3c_fb_platdata goni_lcd_pdata __initdata = { .win[0] = &goni_fb_win0, + .vtiming = &goni_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | VIDCON0_CLKSEL_LCD, .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN @@ -221,20 +229,11 @@ static void __init goni_radio_init(void) i2c1_devs[0].irq = gpio_to_irq(gpio); gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ - gpio_request(gpio, "FM_RST"); - gpio_direction_output(gpio, 1); + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST"); } /* TSP */ static struct mxt_platform_data qt602240_platform_data = { - .x_line = 17, - .y_line = 11, - .x_size = 800, - .y_size = 480, - .blen = 0x21, - .threshold = 0x28, - .voltage = 2800000, /* 2.8V */ - .orient = MXT_DIAGONAL, .irqflags = IRQF_TRIGGER_FALLING, }; @@ -258,8 +257,7 @@ static void __init goni_tsp_init(void) int gpio; gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ - gpio_request(gpio, "TSP_LDO_ON"); - gpio_direction_output(gpio, 1); + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON"); gpio_export(gpio, 0); gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ @@ -271,6 +269,9 @@ static void __init goni_tsp_init(void) i2c2_devs[0].irq = gpio_to_irq(gpio); } +/* USB OTG */ +static struct s3c_hsotg_plat goni_hsotg_pdata; + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -284,6 +285,7 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = { static struct regulator_consumer_supply goni_ldo8_consumers[] = { REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), + REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; static struct regulator_consumer_supply goni_ldo11_consumers[] = { @@ -474,6 +476,10 @@ static struct regulator_consumer_supply buck1_consumer = static struct regulator_consumer_supply buck2_consumer = REGULATOR_SUPPLY("vddint", NULL); +static struct regulator_consumer_supply buck3_consumer = + REGULATOR_SUPPLY("vdet", "s5p-sdo"); + + static struct regulator_init_data goni_buck1_data = { .constraints = { .name = "VARM_1.2V", @@ -510,6 +516,8 @@ static struct regulator_init_data goni_buck3_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &buck3_consumer, }; static struct regulator_init_data goni_buck4_data = { @@ -551,12 +559,8 @@ static struct max8998_platform_data goni_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage1 = 1200000, - .buck1_voltage2 = 1200000, - .buck1_voltage3 = 1200000, - .buck1_voltage4 = 1200000, - .buck2_voltage1 = 1200000, - .buck2_voltage2 = 1200000, + .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, + .buck2_voltage = { 1200000, 1200000 }, }; #endif @@ -653,8 +657,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ @@ -800,18 +804,27 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; +/* Audio device */ +static struct platform_device goni_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, &goni_spi_gpio, &goni_i2c_gpio_pmic, &goni_i2c_gpio5, + &goni_device_audio, &mmc2_fixed_voltage, &goni_device_gpiokeys, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, + &s5p_device_mixer, + &s5p_device_sdo, &s3c_device_i2c0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -835,10 +848,15 @@ static void __init goni_sound_init(void) static void __init goni_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); + s5pv210_init_io(NULL, 0); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init goni_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); } static void __init goni_machine_init(void) @@ -875,22 +893,24 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + s3c_hsotg_set_platdata(&goni_hsotg_pdata); + /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); /* KEYPAD */ samsung_keypad_set_platdata(&keypad_data); - clk_xusbxti.rate = 24000000; - platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); } MACHINE_START(GONI, "GONI") /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, - .timer = &s5p_timer, + .init_time = samsung_timer_init, + .reserve = &goni_reserve, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 6c412c8cecc..448e1d2eeed 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -12,8 +12,9 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/i2c.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -23,14 +24,15 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/ata.h> -#include <plat/iic.h> +#include <linux/platform_data/ata-samsung_cf.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/pm.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> +#include <plat/mfc.h> + +#include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -82,7 +84,6 @@ static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = { }; static struct platform_device *smdkc110_devices[] __initdata = { - &samsung_asoc_dma, &s5pv210_device_iis0, &s5pv210_device_ac97, &s5pv210_device_spdif, @@ -92,6 +93,13 @@ static struct platform_device *smdkc110_devices[] __initdata = { &s3c_device_i2c2, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, }; static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { @@ -109,10 +117,15 @@ static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = { static void __init smdkc110_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init smdkc110_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); } static void __init smdkc110_machine_init(void) @@ -136,9 +149,11 @@ static void __init smdkc110_machine_init(void) MACHINE_START(SMDKC110, "SMDKC110") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, - .timer = &s5p_timer, + .init_time = samsung_timer_init, + .restart = s5pv210_restart, + .reserve = &smdkc110_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index c6a9e86c2d5..2a6655fb63e 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,12 +13,14 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> -#include <linux/sysdev.h> +#include <linux/serial_s3c.h> +#include <linux/device.h> #include <linux/dm9000.h> #include <linux/fb.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -26,25 +28,28 @@ #include <asm/mach-types.h> #include <video/platform_lcd.h> +#include <video/samsung_fimd.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-fb.h> -#include <plat/regs-serial.h> #include <plat/regs-srom.h> #include <plat/gpio-cfg.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/adc.h> -#include <plat/ts.h> -#include <plat/ata.h> -#include <plat/iic.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/ata-samsung_cf.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> +#include <plat/backlight.h> +#include <plat/mfc.h> +#include <plat/clock.h> + +#include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -115,21 +120,10 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { }; static struct resource smdkv210_dm9000_resources[] = { - [0] = { - .start = S5PV210_PA_SROM_BANK5, - .end = S5PV210_PA_SROM_BANK5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S5PV210_PA_SROM_BANK5 + 2, - .end = S5PV210_PA_SROM_BANK5 + 2, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_EINT(9), - .end = IRQ_EINT(9), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1), + [1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1), + [2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; static struct dm9000_plat_data smdkv210_dm9000_platdata = { @@ -137,7 +131,7 @@ static struct dm9000_plat_data smdkv210_dm9000_platdata = { .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 }, }; -struct platform_device smdkv210_dm9000 = { +static struct platform_device smdkv210_dm9000 = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources), @@ -152,15 +146,12 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd, { if (power) { #if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request(S5PV210_GPD0(3), "GPD0"); - gpio_direction_output(S5PV210_GPD0(3), 1); + gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0"); gpio_free(S5PV210_GPD0(3)); #endif /* fire nRESET on power up */ - gpio_request(S5PV210_GPH0(6), "GPH0"); - - gpio_direction_output(S5PV210_GPH0(6), 1); + gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0"); gpio_set_value(S5PV210_GPH0(6), 0); mdelay(10); @@ -171,8 +162,7 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd, gpio_free(S5PV210_GPH0(6)); } else { #if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request(S5PV210_GPD0(3), "GPD0"); - gpio_direction_output(S5PV210_GPD0(3), 0); + gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0"); gpio_free(S5PV210_GPD0(3)); #endif } @@ -189,65 +179,33 @@ static struct platform_device smdkv210_lcd_lte480wv = { }; static struct s3c_fb_pd_win smdkv210_fb_win0 = { - .win_mode = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 24, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdkv210_lcd_timing = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .win[0] = &smdkv210_fb_win0, + .vtiming = &smdkv210_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; -static int smdkv210_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S5PV210_GPD0(3), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n"); - return ret; - } - - /* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */ - s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdkv210_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT); - gpio_free(S5PV210_GPD0(3)); -} - -static struct platform_pwm_backlight_data smdkv210_backlight_data = { - .pwm_id = 3, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdkv210_backlight_init, - .exit = smdkv210_backlight_exit, -}; - -static struct platform_device smdkv210_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[3].dev, - .platform_data = &smdkv210_backlight_data, - }, -}; +/* USB OTG */ +static struct s3c_hsotg_plat smdkv210_hsotg_pdata; static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_adc, @@ -260,18 +218,26 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_i2c2, + &samsung_device_pwm, &s3c_device_rtc, &s3c_device_ts, + &s3c_device_usb_hsotg, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_jpeg, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &s5pv210_device_ac97, &s5pv210_device_iis0, &s5pv210_device_spdif, - &samsung_asoc_dma, + &samsung_asoc_idma, &samsung_device_keypad, &smdkv210_dm9000, &smdkv210_lcd_lte480wv, - &s3c_device_timer[3], - &smdkv210_backlight_device, }; static void __init smdkv210_dm9000_init(void) @@ -304,18 +270,29 @@ static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { /* To Be Updated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { + .no = S5PV210_GPD0(3), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdkv210_bl_data = { + .pwm_id = 3, + .pwm_period_ns = 1000, + .enable_gpio = -1, }; static void __init smdkv210_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); + s5pv210_init_io(NULL, 0); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - s5p_set_timer_source(S5P_PWM2, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); +} + +static void __init smdkv210_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); } static void __init smdkv210_machine_init(void) @@ -325,7 +302,7 @@ static void __init smdkv210_machine_init(void) smdkv210_dm9000_init(); samsung_keypad_set_platdata(&smdkv210_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); @@ -341,14 +318,20 @@ static void __init smdkv210_machine_init(void) s3c_fb_set_platdata(&smdkv210_lcd0_pdata); + s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); + + samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); } MACHINE_START(SMDKV210, "SMDKV210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, - .timer = &s5p_timer, + .init_time = samsung_timer_init, + .restart = s5pv210_restart, + .reserve = &smdkv210_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 925fc0dc625..157805529f2 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -22,12 +23,12 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/iic.h> -#include <plat/s5p-time.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <plat/samsung-time.h> + +#include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ #define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -102,10 +103,10 @@ static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { static void __init torbreck_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init torbreck_machine_init(void) @@ -125,9 +126,10 @@ static void __init torbreck_machine_init(void) MACHINE_START(TORBRECK, "TORBRECK") /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, - .timer = &s5p_timer, + .init_time = samsung_timer_init, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 24febae3d4c..3cf3f9c8ddd 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -21,7 +21,6 @@ #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/regs-timer.h> #include <mach/regs-irq.h> #include <mach/regs-clock.h> @@ -77,18 +76,9 @@ static struct sleep_save s5pv210_core_save[] = { /* Clock ETC */ SAVE_ITEM(S5P_CLK_OUT), SAVE_ITEM(S5P_MDNIE_SEL), - - /* PWM Register */ - SAVE_ITEM(S3C2410_TCFG0), - SAVE_ITEM(S3C2410_TCFG1), - SAVE_ITEM(S3C64XX_TINT_CSTAT), - SAVE_ITEM(S3C2410_TCON), - SAVE_ITEM(S3C2410_TCNTB(0)), - SAVE_ITEM(S3C2410_TCMPB(0)), - SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(void) +static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; @@ -104,8 +94,8 @@ void s5pv210_cpu_suspend(void) "mcr p15, 0, %0, c7, c10, 4\n\t" "wfi" : : "r" (tmp)); - /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s5pv210_pm_prepare(void) @@ -133,7 +123,7 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct sys_device *sysdev) +static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5pv210_pm_prepare; pm_cpu_sleep = s5pv210_cpu_suspend; @@ -141,13 +131,15 @@ static int s5pv210_pm_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s5pv210_pm_driver = { - .add = s5pv210_pm_add, +static struct subsys_interface s5pv210_pm_interface = { + .name = "s5pv210_pm", + .subsys = &s5pv210_subsys, + .add_dev = s5pv210_pm_add, }; static __init int s5pv210_pm_drvinit(void) { - return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); + return subsys_interface_register(&s5pv210_pm_interface); } arch_initcall(s5pv210_pm_drvinit); diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c index e932ebfac56..55103c8220b 100644 --- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -15,7 +15,6 @@ #include <linux/fb.h> #include <linux/gpio.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <plat/fb.h> #include <mach/regs-clock.h> diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index 0f1cc3a1c1e..4a15849766c 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c index f61365a34c5..4777f6b97a9 100644 --- a/arch/arm/mach-s5pv210/setup-i2c1.c +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c index 2f91b5cefbc..bbce6c74b91 100644 --- a/arch/arm/mach-s5pv210/setup-i2c2.c +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c2_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 3e3ac05bb7b..0512ada0052 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -20,7 +20,6 @@ #include <linux/mmc/card.h> #include <plat/gpio-cfg.h> -#include <plat/regs-sdhci.h> #include <plat/sdhci.h> void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c deleted file mode 100644 index a83b6c909f6..00000000000 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ /dev/null @@ -1,63 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-sdhci.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s5pv210_hsmmc_clksrcs[4] = { - [0] = "hsmmc", /* HCLK */ - /* [1] = "hsmmc", - duplicate HCLK entry */ - [2] = "sclk_mmc", /* mmc_bus */ - /* [3] = NULL, - reserved */ -}; - -void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c new file mode 100644 index 00000000000..81aecc162f8 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-spi.c @@ -0,0 +1,34 @@ +/* linux/arch/arm/mach-s5pv210/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +int s3c64xx_spi0_cfg_gpio(void) +{ + s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPB(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +int s3c64xx_spi1_cfg_gpio(void) +{ + s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPB(6), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c new file mode 100644 index 00000000000..b2ee5333f89 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-usb-phy.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundationr + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/regs-usb-hsotg-phy.h> +#include <plat/usb-phy.h> + +#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) +#define S5PV210_USB_PHY0_EN (1 << 0) +#define S5PV210_USB_PHY1_EN (1 << 1) + +static int s5pv210_usb_otgphy_init(struct platform_device *pdev) +{ + struct clk *xusbxti; + u32 phyclk; + + writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN, + S5PV210_USB_PHY_CON); + + /* set clock frequency for PLL */ + phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK; + + xusbxti = clk_get(&pdev->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48 * MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + + /* TODO: select external clock/oscillator */ + writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK); + + /* set to normal OTG PHY */ + writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR); + mdelay(1); + + /* reset OTG PHY and Link */ + writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK, + S3C_RSTCON); + udelay(20); /* at-least 10uS */ + writel(0, S3C_RSTCON); + + return 0; +} + +static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) +{ + writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN | + S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR); + + writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN, + S5PV210_USB_PHY_CON); + + return 0; +} + +int s5p_usb_phy_init(struct platform_device *pdev, int type) +{ + if (type == USB_PHY_TYPE_DEVICE) + return s5pv210_usb_otgphy_init(pdev); + + return -EINVAL; +} + +int s5p_usb_phy_exit(struct platform_device *pdev, int type) +{ + if (type == USB_PHY_TYPE_DEVICE) + return s5pv210_usb_otgphy_exit(pdev); + + return -EINVAL; +} diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S deleted file mode 100644 index a3d649466fb..00000000000 --- a/arch/arm/mach-s5pv210/sleep.S +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/arch/arm/plat-s5p/sleep.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV210 power Manager (Suspend-To-RAM) support - * Based on S3C2410 sleep code by: - * Ben Dooks, (c) 2004 Simtec Electronics - * - * Based on PXA/SA1100 sleep code by: - * Nicolas Pitre, (c) 2002 Monta Vista Software Inc - * Cliff Brake, (c) 2001 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/memory.h> - - .text - - /* s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - - stmfd sp!, { r3 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - ldr r0, =pm_cpu_sleep - ldr r0, [ r0 ] - mov pc, r0 - -resume_with_mmu: - ldmfd sp!, { r3 - r12, pc } - - .ltorg - - /* sleep magic, to allow the bootloader to check for an valid - * image to resume to. Must be the first word before the - * s3c_cpu_resume entry. - */ - - .word 0x2bedf00d - - /* s3c_cpu_resume - * - * resume code entry for bootloader to call - * - * we must put this code here in the data segment as we have no - * other way of restoring the stack pointer after sleep, and we - * must not write to the code segment (code is read-only) - */ - -ENTRY(s3c_cpu_resume) - b cpu_resume |