diff options
Diffstat (limited to 'arch/arm/mach-s5pc100')
37 files changed, 1647 insertions, 1631 deletions
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 8593337784e..c5e3a969b06 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -5,10 +5,13 @@ # Configuration options for the S5PC100 CPU +if ARCH_S5PC100 + config CPU_S5PC100 bool - select CPU_S5PC100_INIT - select CPU_S5PC100_CLOCK + select ARM_AMBA + select PL330_DMA if DMADEVICES + select S5P_EXT_INT help Enable S5PC100 CPU support @@ -17,27 +20,62 @@ config S5PC100_SETUP_FB_24BPP help Common setup code for S5PC1XX with an 24bpp RGB display helper. -config S5PC100_SETUP_SDHCI - bool - select S5PC1XX_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PC100 based SDHCI systems - config S5PC100_SETUP_I2C1 bool help Common setup code for i2c bus 1. +config S5PC100_SETUP_IDE + bool + help + Common setup code for S5PC100 IDE GPIO configurations + +config S5PC100_SETUP_KEYPAD + bool + help + Common setup code for KEYPAD GPIO configurations. + +config S5PC100_SETUP_SDHCI + bool + select S5PC100_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PC100 based SDHCI systems + +config S5PC100_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +config S5PC100_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations. + config MACH_SMDKC100 bool "SMDKC100" select CPU_S5PC100 select S3C_DEV_FB - select S3C_DEV_I2C1 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT select S5PC100_SETUP_FB_24BPP select S5PC100_SETUP_I2C1 + select S5PC100_SETUP_IDE + select S5PC100_SETUP_KEYPAD select S5PC100_SETUP_SDHCI + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_IDE + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_TS help Machine support for the Samsung SMDKC100 + +endif diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index 373bc546eae..118c711f74e 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -9,16 +9,24 @@ obj-m := obj-n := obj- := -# Core support for S5PC100 system +# Core -obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o -obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o +obj-y += common.o clock.o -# Helper and device support - -obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o +obj-y += dma.o # machine support + obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o + +# device support + +obj-y += dev-audio.o + +obj-y += setup-i2c0.o +obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o +obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o +obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot index ff90aa13bd6..79ece4055b0 100644 --- a/arch/arm/mach-s5pc100/Makefile.boot +++ b/arch/arm/mach-s5pc100/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index e3fed4cfe7a..d0dc10ee772 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -27,10 +27,15 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/s5pc100.h> + +#include "common.h" static struct clk s5p_clk_otgphy = { .name = "otg_phy", +}; + +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", .id = -1, }; @@ -47,7 +52,6 @@ static struct clksrc_sources clk_src_mout_href = { static struct clksrc_clk clk_mout_href = { .clk = { .name = "mout_href", - .id = -1, }, .sources = &clk_src_mout_href, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 }, @@ -66,7 +70,6 @@ static struct clksrc_sources clk_src_mout_48m = { static struct clksrc_clk clk_mout_48m = { .clk = { .name = "mout_48m", - .id = -1, }, .sources = &clk_src_mout_48m, .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 }, @@ -75,7 +78,6 @@ static struct clksrc_clk clk_mout_48m = { static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", - .id = -1, }, .sources = &clk_src_mpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, @@ -85,7 +87,6 @@ static struct clksrc_clk clk_mout_mpll = { static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", - .id = -1, }, .sources = &clk_src_apll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, @@ -94,7 +95,6 @@ static struct clksrc_clk clk_mout_apll = { static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", - .id = -1, }, .sources = &clk_src_epll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, @@ -112,7 +112,6 @@ static struct clksrc_sources clk_src_mout_hpll = { static struct clksrc_clk clk_mout_hpll = { .clk = { .name = "mout_hpll", - .id = -1, }, .sources = &clk_src_mout_hpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, @@ -121,7 +120,6 @@ static struct clksrc_clk clk_mout_hpll = { static struct clksrc_clk clk_div_apll = { .clk = { .name = "div_apll", - .id = -1, .parent = &clk_mout_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 }, @@ -130,7 +128,6 @@ static struct clksrc_clk clk_div_apll = { static struct clksrc_clk clk_div_arm = { .clk = { .name = "div_arm", - .id = -1, .parent = &clk_div_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, @@ -139,7 +136,6 @@ static struct clksrc_clk clk_div_arm = { static struct clksrc_clk clk_div_d0_bus = { .clk = { .name = "div_d0_bus", - .id = -1, .parent = &clk_div_arm.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 }, @@ -148,7 +144,6 @@ static struct clksrc_clk clk_div_d0_bus = { static struct clksrc_clk clk_div_pclkd0 = { .clk = { .name = "div_pclkd0", - .id = -1, .parent = &clk_div_d0_bus.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 }, @@ -157,7 +152,6 @@ static struct clksrc_clk clk_div_pclkd0 = { static struct clksrc_clk clk_div_secss = { .clk = { .name = "div_secss", - .id = -1, .parent = &clk_div_d0_bus.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 }, @@ -166,7 +160,6 @@ static struct clksrc_clk clk_div_secss = { static struct clksrc_clk clk_div_apll2 = { .clk = { .name = "div_apll2", - .id = -1, .parent = &clk_mout_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 }, @@ -177,7 +170,7 @@ static struct clk *clk_src_mout_am_list[] = { [1] = &clk_div_apll2.clk, }; -struct clksrc_sources clk_src_mout_am = { +static struct clksrc_sources clk_src_mout_am = { .sources = clk_src_mout_am_list, .nr_sources = ARRAY_SIZE(clk_src_mout_am_list), }; @@ -185,7 +178,6 @@ struct clksrc_sources clk_src_mout_am = { static struct clksrc_clk clk_mout_am = { .clk = { .name = "mout_am", - .id = -1, }, .sources = &clk_src_mout_am, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 }, @@ -194,7 +186,6 @@ static struct clksrc_clk clk_mout_am = { static struct clksrc_clk clk_div_d1_bus = { .clk = { .name = "div_d1_bus", - .id = -1, .parent = &clk_mout_am.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 }, @@ -203,7 +194,6 @@ static struct clksrc_clk clk_div_d1_bus = { static struct clksrc_clk clk_div_mpll2 = { .clk = { .name = "div_mpll2", - .id = -1, .parent = &clk_mout_am.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 }, @@ -212,7 +202,6 @@ static struct clksrc_clk clk_div_mpll2 = { static struct clksrc_clk clk_div_mpll = { .clk = { .name = "div_mpll", - .id = -1, .parent = &clk_mout_am.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 }, @@ -223,7 +212,7 @@ static struct clk *clk_src_mout_onenand_list[] = { [1] = &clk_div_d1_bus.clk, }; -struct clksrc_sources clk_src_mout_onenand = { +static struct clksrc_sources clk_src_mout_onenand = { .sources = clk_src_mout_onenand_list, .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list), }; @@ -231,7 +220,6 @@ struct clksrc_sources clk_src_mout_onenand = { static struct clksrc_clk clk_mout_onenand = { .clk = { .name = "mout_onenand", - .id = -1, }, .sources = &clk_src_mout_onenand, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 }, @@ -240,7 +228,6 @@ static struct clksrc_clk clk_mout_onenand = { static struct clksrc_clk clk_div_onenand = { .clk = { .name = "div_onenand", - .id = -1, .parent = &clk_mout_onenand.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 }, @@ -249,7 +236,6 @@ static struct clksrc_clk clk_div_onenand = { static struct clksrc_clk clk_div_pclkd1 = { .clk = { .name = "div_pclkd1", - .id = -1, .parent = &clk_div_d1_bus.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 }, @@ -258,7 +244,6 @@ static struct clksrc_clk clk_div_pclkd1 = { static struct clksrc_clk clk_div_cam = { .clk = { .name = "div_cam", - .id = -1, .parent = &clk_div_mpll2.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 }, @@ -267,30 +252,11 @@ static struct clksrc_clk clk_div_cam = { static struct clksrc_clk clk_div_hdmi = { .clk = { .name = "div_hdmi", - .id = -1, .parent = &clk_mout_hpll.clk, }, .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 }, }; -static int s5pc100_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -static unsigned long s5pc100_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - static u32 epll_div[][4] = { { 32750000, 131, 3, 4 }, { 32768000, 131, 3, 4 }, @@ -341,13 +307,16 @@ static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate) __raw_writel(epll_con, S5P_EPLL_CON); + printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", + clk->rate, rate); + clk->rate = rate; return 0; } static struct clk_ops s5pc100_epll_ops = { - .get_rate = s5pc100_epll_get_rate, + .get_rate = s5p_epll_get_rate, .set_rate = s5pc100_epll_set_rate, }; @@ -411,405 +380,379 @@ static int s5pc100_sclk1_ctrl(struct clk *clk, int enable) * recommended to keep the following clocks disabled until the driver requests * for enabling the clock. */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { .name = "cssys", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 6), }, { .name = "secss", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 5), }, { .name = "g2d", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 4), }, { .name = "mdma", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 3), }, { .name = "cfcon", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 2), }, { .name = "nfcon", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 3), }, { .name = "onenandc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 2), }, { .name = "sdm", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_2_ctrl, .ctrlbit = (1 << 2), }, { .name = "seckey", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_2_ctrl, .ctrlbit = (1 << 1), }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 5), - }, { .name = "modemif", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 4), }, { .name = "otg", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 3), }, { .name = "usbhost", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 2), }, { - .name = "pdma", - .id = 1, + .name = "dma", + .devname = "dma-pl330.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 1), }, { - .name = "pdma", - .id = 0, + .name = "dma", + .devname = "dma-pl330.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 0), }, { .name = "lcd", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 0), }, { .name = "rotator", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 1), }, { .name = "fimc", - .id = 0, + .devname = "s5p-fimc.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 2), }, { .name = "fimc", - .id = 1, + .devname = "s5p-fimc.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 3), }, { .name = "fimc", - .id = 2, - .parent = &clk_div_d1_bus.clk, + .devname = "s5p-fimc.2", .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 4), }, { .name = "jpeg", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 5), }, { .name = "mipi-dsim", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 6), }, { .name = "mipi-csis", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 7), }, { .name = "g3d", - .id = 0, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 8), }, { .name = "tv", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 0), }, { .name = "vp", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 1), }, { .name = "mixer", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 2), }, { .name = "hdmi", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 3), }, { .name = "mfc", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 4), }, { .name = "apc", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 2), }, { .name = "iec", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 3), }, { .name = "systimer", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 7), }, { .name = "watchdog", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 8), }, { .name = "rtc", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 9), }, { .name = "i2c", - .id = 0, + .devname = "s3c2440-i2c.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 4), }, { .name = "i2c", - .id = 1, + .devname = "s3c2440-i2c.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 5), }, { .name = "spi", - .id = 0, + .devname = "s5pc100-spi.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 6), }, { .name = "spi", - .id = 1, + .devname = "s5pc100-spi.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 7), }, { .name = "spi", - .id = 2, + .devname = "s5pc100-spi.2", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 8), }, { .name = "irda", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 9), }, { .name = "ccan", - .id = 0, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 10), }, { .name = "ccan", - .id = 1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 11), }, { .name = "hsitx", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsirx", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 13), }, { - .name = "iis", - .id = 0, - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "iis", - .id = 1, - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "iis", - .id = 2, - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 2), - }, { .name = "ac97", - .id = -1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 3), }, { .name = "pcm", - .id = 0, - .parent = &clk_div_d1_bus.clk, + .devname = "samsung-pcm.0", + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 4), }, { .name = "pcm", - .id = 1, - .parent = &clk_div_d1_bus.clk, + .devname = "samsung-pcm.1", + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 5), }, { .name = "spdif", - .id = -1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 6), }, { .name = "adc", - .id = -1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 7), }, { - .name = "keyif", - .id = -1, - .parent = &clk_div_d1_bus.clk, + .name = "keypad", + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 8), }, { - .name = "spi_48m", - .id = 0, - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "spi_48m", - .id = 1, - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "spi_48m", - .id = 2, - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 9), - }, { .name = "mmc_48m", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 15), }, { .name = "mmc_48m", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 16), }, { .name = "mmc_48m", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 17), }, }; +static struct clk clk_hsmmc2 = { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &clk_div_d1_bus.clk, + .enable = s5pc100_d1_0_ctrl, + .ctrlbit = (1 << 7), +}; + +static struct clk clk_hsmmc1 = { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &clk_div_d1_bus.clk, + .enable = s5pc100_d1_0_ctrl, + .ctrlbit = (1 << 6), +}; + +static struct clk clk_hsmmc0 = { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &clk_div_d1_bus.clk, + .enable = s5pc100_d1_0_ctrl, + .ctrlbit = (1 << 5), +}; + +static struct clk clk_48m_spi0 = { + .name = "spi_48m", + .devname = "s5pc100-spi.0", + .parent = &clk_mout_48m.clk, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = (1 << 7), +}; + +static struct clk clk_48m_spi1 = { + .name = "spi_48m", + .devname = "s5pc100-spi.1", + .parent = &clk_mout_48m.clk, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = (1 << 8), +}; + +static struct clk clk_48m_spi2 = { + .name = "spi_48m", + .devname = "s5pc100-spi.2", + .parent = &clk_mout_48m.clk, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = (1 << 9), +}; + +static struct clk clk_i2s0 = { + .name = "iis", + .devname = "samsung-i2s.0", + .parent = &clk_div_pclkd1.clk, + .enable = s5pc100_d1_5_ctrl, + .ctrlbit = (1 << 0), +}; + +static struct clk clk_i2s1 = { + .name = "iis", + .devname = "samsung-i2s.1", + .parent = &clk_div_pclkd1.clk, + .enable = s5pc100_d1_5_ctrl, + .ctrlbit = (1 << 1), +}; + +static struct clk clk_i2s2 = { + .name = "iis", + .devname = "samsung-i2s.2", + .parent = &clk_div_pclkd1.clk, + .enable = s5pc100_d1_5_ctrl, + .ctrlbit = (1 << 2), +}; + static struct clk clk_vclk54m = { .name = "vclk_54m", - .id = -1, .rate = 54000000, }; static struct clk clk_i2scdclk0 = { .name = "i2s_cdclk0", - .id = -1, }; static struct clk clk_i2scdclk1 = { .name = "i2s_cdclk1", - .id = -1, }; static struct clk clk_i2scdclk2 = { .name = "i2s_cdclk2", - .id = -1, }; static struct clk clk_pcmcdclk0 = { .name = "pcm_cdclk0", - .id = -1, }; static struct clk clk_pcmcdclk1 = { .name = "pcm_cdclk1", - .id = -1, }; static struct clk *clk_src_group1_list[] = { @@ -819,7 +762,7 @@ static struct clk *clk_src_group1_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group1 = { +static struct clksrc_sources clk_src_group1 = { .sources = clk_src_group1_list, .nr_sources = ARRAY_SIZE(clk_src_group1_list), }; @@ -829,7 +772,7 @@ static struct clk *clk_src_group2_list[] = { [1] = &clk_div_mpll.clk, }; -struct clksrc_sources clk_src_group2 = { +static struct clksrc_sources clk_src_group2 = { .sources = clk_src_group2_list, .nr_sources = ARRAY_SIZE(clk_src_group2_list), }; @@ -843,11 +786,23 @@ static struct clk *clk_src_group3_list[] = { [5] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group3 = { +static struct clksrc_sources clk_src_group3 = { .sources = clk_src_group3_list, .nr_sources = ARRAY_SIZE(clk_src_group3_list), }; +static struct clksrc_clk clk_sclk_audio0 = { + .clk = { + .name = "sclk_audio", + .devname = "samsung-pcm.0", + .ctrlbit = (1 << 8), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_group3, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, +}; + static struct clk *clk_src_group4_list[] = { [0] = &clk_mout_epll.clk, [1] = &clk_div_mpll.clk, @@ -857,11 +812,23 @@ static struct clk *clk_src_group4_list[] = { [5] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group4 = { +static struct clksrc_sources clk_src_group4 = { .sources = clk_src_group4_list, .nr_sources = ARRAY_SIZE(clk_src_group4_list), }; +static struct clksrc_clk clk_sclk_audio1 = { + .clk = { + .name = "sclk_audio", + .devname = "samsung-pcm.1", + .ctrlbit = (1 << 9), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_group4, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, +}; + static struct clk *clk_src_group5_list[] = { [0] = &clk_mout_epll.clk, [1] = &clk_div_mpll.clk, @@ -870,18 +837,30 @@ static struct clk *clk_src_group5_list[] = { [4] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group5 = { +static struct clksrc_sources clk_src_group5 = { .sources = clk_src_group5_list, .nr_sources = ARRAY_SIZE(clk_src_group5_list), }; +static struct clksrc_clk clk_sclk_audio2 = { + .clk = { + .name = "sclk_audio", + .devname = "samsung-pcm.2", + .ctrlbit = (1 << 10), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_group5, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, +}; + static struct clk *clk_src_group6_list[] = { [0] = &s5p_clk_27m, [1] = &clk_vclk54m, [2] = &clk_div_hdmi.clk, }; -struct clksrc_sources clk_src_group6 = { +static struct clksrc_sources clk_src_group6 = { .sources = clk_src_group6_list, .nr_sources = ARRAY_SIZE(clk_src_group6_list), }; @@ -893,7 +872,7 @@ static struct clk *clk_src_group7_list[] = { [3] = &clk_vclk54m, }; -struct clksrc_sources clk_src_group7 = { +static struct clksrc_sources clk_src_group7 = { .sources = clk_src_group7_list, .nr_sources = ARRAY_SIZE(clk_src_group7_list), }; @@ -904,7 +883,7 @@ static struct clk *clk_src_mmc0_list[] = { [2] = &clk_fin_epll, }; -struct clksrc_sources clk_src_mmc0 = { +static struct clksrc_sources clk_src_mmc0 = { .sources = clk_src_mmc0_list, .nr_sources = ARRAY_SIZE(clk_src_mmc0_list), }; @@ -916,7 +895,7 @@ static struct clk *clk_src_mmc12_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_mmc12 = { +static struct clksrc_sources clk_src_mmc12 = { .sources = clk_src_mmc12_list, .nr_sources = ARRAY_SIZE(clk_src_mmc12_list), }; @@ -928,7 +907,7 @@ static struct clk *clk_src_irda_usb_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_irda_usb = { +static struct clksrc_sources clk_src_irda_usb = { .sources = clk_src_irda_usb_list, .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list), }; @@ -939,60 +918,37 @@ static struct clk *clk_src_pwi_list[] = { [2] = &clk_div_mpll.clk, }; -struct clksrc_sources clk_src_pwi = { +static struct clksrc_sources clk_src_pwi = { .sources = clk_src_pwi_list, .nr_sources = ARRAY_SIZE(clk_src_pwi_list), }; -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_spi", - .id = 0, - .ctrlbit = (1 << 4), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .id = 1, - .ctrlbit = (1 << 5), - .enable = s5pc100_sclk0_ctrl, +static struct clk *clk_sclk_spdif_list[] = { + [0] = &clk_sclk_audio0.clk, + [1] = &clk_sclk_audio1.clk, + [2] = &clk_sclk_audio2.clk, +}; - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .id = 2, - .ctrlbit = (1 << 6), - .enable = s5pc100_sclk0_ctrl, +static struct clksrc_sources clk_src_sclk_spdif = { + .sources = clk_sclk_spdif_list, + .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list), +}; - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = (1 << 3), - .enable = s5pc100_sclk0_ctrl, +static struct clksrc_clk clk_sclk_spdif = { + .clk = { + .name = "sclk_spdif", + .ctrlbit = (1 << 11), + .enable = s5pc100_sclk1_ctrl, + .ops = &s5p_sclk_spdif_ops, + }, + .sources = &clk_src_sclk_spdif, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 }, +}; - }, - .sources = &clk_src_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { +static struct clksrc_clk clksrcs[] = { + { .clk = { .name = "sclk_mixer", - .id = -1, .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, @@ -1001,41 +957,7 @@ static struct clksrc_clk clksrcs[] = { .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 }, }, { .clk = { - .name = "sclk_audio", - .id = 0, - .ctrlbit = (1 << 8), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group3, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio", - .id = 1, - .ctrlbit = (1 << 9), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group4, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio", - .id = 2, - .ctrlbit = (1 << 10), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group5, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, - }, { - .clk = { .name = "sclk_lcd", - .id = -1, .ctrlbit = (1 << 0), .enable = s5pc100_sclk1_ctrl, @@ -1046,7 +968,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 0, + .devname = "s5p-fimc.0", .ctrlbit = (1 << 1), .enable = s5pc100_sclk1_ctrl, @@ -1057,7 +979,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 1, + .devname = "s5p-fimc.1", .ctrlbit = (1 << 2), .enable = s5pc100_sclk1_ctrl, @@ -1068,7 +990,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 2, + .devname = "s5p-fimc.2", .ctrlbit = (1 << 3), .enable = s5pc100_sclk1_ctrl, @@ -1078,41 +1000,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 }, }, { .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = (1 << 12), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_mmc0, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = (1 << 13), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_mmc12, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = (1 << 14), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_mmc12, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, - }, { - .clk = { .name = "sclk_irda", - .id = 2, .ctrlbit = (1 << 10), .enable = s5pc100_sclk0_ctrl, @@ -1123,7 +1011,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_irda", - .id = -1, .ctrlbit = (1 << 10), .enable = s5pc100_sclk0_ctrl, @@ -1134,7 +1021,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_pwi", - .id = -1, .ctrlbit = (1 << 1), .enable = s5pc100_sclk0_ctrl, @@ -1145,7 +1031,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_uhost", - .id = -1, .ctrlbit = (1 << 11), .enable = s5pc100_sclk0_ctrl, @@ -1156,6 +1041,89 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 3), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .ctrlbit = (1 << 12), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_mmc0, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .ctrlbit = (1 << 13), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_mmc12, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .ctrlbit = (1 << 14), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_mmc12, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s5pc100-spi.0", + .ctrlbit = (1 << 4), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group1, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s5pc100-spi.1", + .ctrlbit = (1 << 5), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group1, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "s5pc100-spi.2", + .ctrlbit = (1 << 6), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group1, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 }, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1179,6 +1147,32 @@ static struct clksrc_clk *sysclks[] = { &clk_div_pclkd1, &clk_div_cam, &clk_div_hdmi, + &clk_sclk_audio0, + &clk_sclk_audio1, + &clk_sclk_audio2, + &clk_sclk_spdif, +}; + +static struct clk *clk_cdev[] = { + &clk_hsmmc0, + &clk_hsmmc1, + &clk_hsmmc2, + &clk_48m_spi0, + &clk_48m_spi1, + &clk_48m_spi2, + &clk_i2s0, + &clk_i2s1, + &clk_i2s2, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, + &clk_sclk_spi0, + &clk_sclk_spi1, + &clk_sclk_spi2, }; void __init_or_cpufreq s5pc100_setup_clocks(void) @@ -1196,7 +1190,7 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) unsigned int ptr; /* Set S5PC100 functions for clk_fout_epll */ - clk_fout_epll.enable = s5pc100_epll_enable; + clk_fout_epll.enable = s5p_epll_enable; clk_fout_epll.ops = &s5pc100_epll_ops; printk(KERN_DEBUG "%s: registering clocks\n", __func__); @@ -1241,79 +1235,70 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) static struct clk init_clocks[] = { { .name = "tzic", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 1), }, { .name = "intc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 0), }, { .name = "ebi", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 5), }, { .name = "intmem", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 4), }, { .name = "sromc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 1), }, { .name = "dmc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 0), }, { .name = "chipid", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 0), }, { .name = "gpio", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", - .id = 0, + .devname = "s3c6400-uart.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 0), }, { .name = "uart", - .id = 1, + .devname = "s3c6400-uart.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", - .id = 2, + .devname = "s3c6400-uart.2", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 2), }, { .name = "uart", - .id = 3, + .devname = "s3c6400-uart.3", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 3), }, { .name = "timers", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 6), @@ -1329,10 +1314,29 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk1, }; +static struct clk_lookup s5pc100_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), + CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0), + CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1), + CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2), + CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), + CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), + CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), +}; + void __init s5pc100_register_clocks(void) { - struct clk *clkp; - int ret; int ptr; s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); @@ -1342,17 +1346,16 @@ void __init s5pc100_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup)); - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - (clkp->enable)(clkp, 0); - } + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) + s3c_disable_clocks(clk_cdev[ptr], 1); - s3c_pwmclk_init(); + s3c24xx_register_clock(&dummy_apb_pclk); } diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c new file mode 100644 index 00000000000..6a41bf7dacf --- /dev/null +++ b/arch/arm/mach-s5pc100/common.c @@ -0,0 +1,255 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min <bhmin@samsung.com> + * + * Common Codes for S5PC100 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <clocksource/samsung_pwm.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/reboot.h> + +#include <asm/irq.h> +#include <asm/proc-fns.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/map.h> +#include <mach/hardware.h> +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/sdhci.h> +#include <plat/adc-core.h> +#include <plat/ata-core.h> +#include <plat/fb-core.h> +#include <plat/iic-core.h> +#include <plat/onenand-core.h> +#include <plat/pwm-core.h> +#include <plat/spi-core.h> +#include <plat/watchdog-reset.h> + +#include "common.h" + +static const char name_s5pc100[] = "S5PC100"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = S5PC100_CPU_ID, + .idmask = S5PC100_CPU_MASK, + .map_io = s5pc100_map_io, + .init_clocks = s5pc100_init_clocks, + .init_uarts = s5pc100_init_uarts, + .init = s5pc100_init, + .name = name_s5pc100, + }, +}; + +/* Initial IO mappings */ + +static struct map_desc s5pc100_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(S5PC100_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S5PC100_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S5PC100_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5PC100_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PC100_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PC100_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC2, + .pfn = __phys_to_pfn(S5PC100_PA_VIC2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC100_VA_OTHERS, + .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), + .length = SZ_4K, + .type = MT_DEVICE, + } +}; + +static struct samsung_pwm_variant s5pc100_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = (1 << 5), +}; + +void __init samsung_set_timer_source(unsigned int event, unsigned int source) +{ + s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); +} + +void __init samsung_timer_init(void) +{ + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, + IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, + }; + + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &s5pc100_pwm_variant); +} + +/* + * s5pc100_map_io + * + * register the standard CPU IO areas + */ + +void __init s5pc100_init_io(struct map_desc *mach_desc, int size) +{ + /* initialize the io descriptors we need for initialization */ + iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + /* detect cpu id and rev. */ + s5p_init_cpu(S5P_VA_CHIPID); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); + + samsung_pwm_set_platdata(&s5pc100_pwm_variant); +} + +void __init s5pc100_map_io(void) +{ + /* initialise device information early */ + s5pc100_default_sdhci0(); + s5pc100_default_sdhci1(); + s5pc100_default_sdhci2(); + + s3c_adc_setname("s3c64xx-adc"); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + + s3c_onenand_setname("s5pc100-onenand"); + s3c_fb_setname("s5pc100-fb"); + s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); +} + +void __init s5pc100_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5pc100_register_clocks(); + s5pc100_setup_clocks(); + samsung_wdt_reset_init(S3C_VA_WATCHDOG); +} + +void __init s5pc100_init_irq(void) +{ + u32 vic[] = {~0, ~0, ~0}; + + /* VIC0, VIC1, and VIC2 are fully populated. */ + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +static struct bus_type s5pc100_subsys = { + .name = "s5pc100-core", + .dev_name = "s5pc100-core", +}; + +static struct device s5pc100_dev = { + .bus = &s5pc100_subsys, +}; + +static int __init s5pc100_core_init(void) +{ + return subsys_system_register(&s5pc100_subsys, NULL); +} +core_initcall(s5pc100_core_init); + +int __init s5pc100_init(void) +{ + printk(KERN_INFO "S5PC100: Initializing architecture\n"); + return device_register(&s5pc100_dev); +} + +/* uart registration process */ + +void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +void s5pc100_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode != REBOOT_SOFT) + samsung_wdt_reset(); + + soft_restart(0); +} diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h new file mode 100644 index 00000000000..08d782d65d7 --- /dev/null +++ b/arch/arm/mach-s5pc100/common.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S5PC100 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H +#define __ARCH_ARM_MACH_S5PC100_COMMON_H + +#include <linux/reboot.h> + +void s5pc100_init_io(struct map_desc *mach_desc, int size); +void s5pc100_init_irq(void); + +void s5pc100_register_clocks(void); +void s5pc100_setup_clocks(void); + +void s5pc100_restart(enum reboot_mode mode, const char *cmd); + +extern int s5pc100_init(void); +extern void s5pc100_map_io(void); +extern void s5pc100_init_clocks(int xtal); +extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */ diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c deleted file mode 100644 index d79e7574a85..00000000000 --- a/arch/arm/mach-s5pc100/cpu.c +++ /dev/null @@ -1,126 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/cpu.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on mach-s3c6410/cpu.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/proc-fns.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/cpu-freq.h> -#include <plat/regs-serial.h> -#include <plat/regs-power.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/sdhci.h> -#include <plat/iic-core.h> -#include <plat/s5pc100.h> - -/* Initial IO mappings */ - -static struct map_desc s5pc100_iodesc[] __initdata = { -}; - -static void s5pc100_idle(void) -{ - unsigned long tmp; - - tmp = __raw_readl(S5PC100_PWR_CFG); - tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE; - tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK; - tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE; - __raw_writel(tmp, S5PC100_PWR_CFG); - - tmp = __raw_readl(S5PC100_OTHERS); - tmp |= S5PC100_PMU_INT_DISABLE; - __raw_writel(tmp, S5PC100_OTHERS); - - cpu_do_idle(); -} - -/* s5pc100_map_io - * - * register the standard cpu IO areas -*/ - -void __init s5pc100_map_io(void) -{ - iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); - - /* initialise device information early */ - s5pc100_default_sdhci0(); - s5pc100_default_sdhci1(); - s5pc100_default_sdhci2(); - - /* the i2c devices are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); -} - -void __init s5pc100_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c24xx_register_baseclocks(xtal); - s5pc1xx_register_clocks(); - s5pc100_register_clocks(); - s5pc100_setup_clocks(); -} - -void __init s5pc100_init_irq(void) -{ - u32 vic_valid[] = {~0, ~0, ~0}; - - /* VIC0, VIC1, and VIC2 are fully populated. */ - s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid)); -} - -struct sysdev_class s5pc100_sysclass = { - .name = "s5pc100-core", -}; - -static struct sys_device s5pc100_sysdev = { - .cls = &s5pc100_sysclass, -}; - -static int __init s5pc100_core_init(void) -{ - return sysdev_class_register(&s5pc100_sysclass); -} - -core_initcall(s5pc100_core_init); - -int __init s5pc100_init(void) -{ - printk(KERN_DEBUG "S5PC100: Initialising architecture\n"); - - s5pc1xx_idle = s5pc100_idle; - - return sysdev_register(&s5pc100_sysdev); -} diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c new file mode 100644 index 00000000000..46f488b0939 --- /dev/null +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -0,0 +1,239 @@ +/* linux/arch/arm/mach-s5pc100/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <linux/platform_data/asoc-s3c.h> + +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5pc100_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 0: /* Dedicated pins */ + break; + case 1: + s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2)); + break; + case 2: + s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4)); + break; + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata i2sv5_pdata = { + .cfg_gpio = s5pc100_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI + | QUIRK_NEED_RSTCLR, + }, + }, +}; + +static struct resource s5pc100_iis0_resource[] = { + [0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), + [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), +}; + +struct platform_device s5pc100_device_iis0 = { + .name = "samsung-i2s", + .id = 0, + .num_resources = ARRAY_SIZE(s5pc100_iis0_resource), + .resource = s5pc100_iis0_resource, + .dev = { + .platform_data = &i2sv5_pdata, + }, +}; + +static struct s3c_audio_pdata i2sv3_pdata = { + .cfg_gpio = s5pc100_cfg_i2s, +}; + +static struct resource s5pc100_iis1_resource[] = { + [0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), +}; + +struct platform_device s5pc100_device_iis1 = { + .name = "samsung-i2s", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_iis1_resource), + .resource = s5pc100_iis1_resource, + .dev = { + .platform_data = &i2sv3_pdata, + }, +}; + +static struct resource s5pc100_iis2_resource[] = { + [0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), +}; + +struct platform_device s5pc100_device_iis2 = { + .name = "samsung-i2s", + .id = 2, + .num_resources = ARRAY_SIZE(s5pc100_iis2_resource), + .resource = s5pc100_iis2_resource, + .dev = { + .platform_data = &i2sv3_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5)); + break; + + case 1: + s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5pc100_pcm_cfg_gpio, +}; + +static struct resource s5pc100_pcm0_resource[] = { + [0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), +}; + +struct platform_device s5pc100_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource), + .resource = s5pc100_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pc100_pcm1_resource[] = { + [0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), +}; + +struct platform_device s5pc100_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource), + .resource = s5pc100_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +/* AC97 Controller platform devices */ + +static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev) +{ + return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4)); +} + +static struct resource s5pc100_ac97_resource[] = { + [0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), + [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), + [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), + [4] = DEFINE_RES_IRQ(IRQ_AC97), +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { + .cfg_gpio = s5pc100_ac97_cfg_gpio, +}; + +static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pc100_device_ac97 = { + .name = "samsung-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc100_ac97_resource), + .resource = s5pc100_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &s5pc100_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +/* S/PDIF Controller platform_device */ +static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static struct resource s5pc100_spdif_resource[] = { + [0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPDIF), +}; + +static struct s3c_audio_pdata s5p_spdif_pdata = { + .cfg_gpio = s5pc100_spdif_cfg_gpd, +}; + +static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pc100_device_spdif = { + .name = "samsung-spdif", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc100_spdif_resource), + .resource = s5pc100_spdif_resource, + .dev = { + .platform_data = &s5p_spdif_pdata, + .dma_mask = &s5pc100_spdif_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s5pc100_spdif_setup_gpio(int gpio) +{ + if (gpio == S5PC100_SPDIF_GPD) + s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd; + else + s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3; +} diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c new file mode 100644 index 00000000000..b1418409709 --- /dev/null +++ b/arch/arm/mach-s5pc100/dma.c @@ -0,0 +1,130 @@ +/* linux/arch/arm/mach-s5pc100/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> + +#include <asm/irq.h> +#include <plat/devs.h> +#include <plat/irqs.h> + +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/dma.h> + +static u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_EXTERNAL, + DMACH_PWM, + DMACH_SPDIF, + DMACH_HSI_RX, + DMACH_HSI_TX, +}; + +static struct dma_pl330_platdata s5pc100_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri_id = pdma0_peri, +}; + +static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, + S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata); + +static u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, +}; + +static struct dma_pl330_platdata s5pc100_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri_id = pdma1_peri, +}; + +static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, + S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata); + +static int __init s5pc100_dma_init(void) +{ + dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); + amba_device_register(&s5pc100_pdma0_device, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); + amba_device_register(&s5pc100_pdma1_device, &iomem_resource); + + return 0; +} +arch_initcall(s5pc100_dma_init); diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c deleted file mode 100644 index c8e8336a3a1..00000000000 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * arch/arm/plat-s5pc1xx/gpiolib.c - * - * Copyright 2009 Samsung Electronics Co - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S5PC1XX - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -/* S5PC100 GPIO bank summary: - * - * Bank GPIOs Style INT Type - * A0 8 4Bit GPIO_INT0 - * A1 5 4Bit GPIO_INT1 - * B 8 4Bit GPIO_INT2 - * C 5 4Bit GPIO_INT3 - * D 7 4Bit GPIO_INT4 - * E0 8 4Bit GPIO_INT5 - * E1 6 4Bit GPIO_INT6 - * F0 8 4Bit GPIO_INT7 - * F1 8 4Bit GPIO_INT8 - * F2 8 4Bit GPIO_INT9 - * F3 4 4Bit GPIO_INT10 - * G0 8 4Bit GPIO_INT11 - * G1 3 4Bit GPIO_INT12 - * G2 7 4Bit GPIO_INT13 - * G3 7 4Bit GPIO_INT14 - * H0 8 4Bit WKUP_INT - * H1 8 4Bit WKUP_INT - * H2 8 4Bit WKUP_INT - * H3 8 4Bit WKUP_INT - * I 8 4Bit GPIO_INT15 - * J0 8 4Bit GPIO_INT16 - * J1 5 4Bit GPIO_INT17 - * J2 8 4Bit GPIO_INT18 - * J3 8 4Bit GPIO_INT19 - * J4 4 4Bit GPIO_INT20 - * K0 8 4Bit None - * K1 6 4Bit None - * K2 8 4Bit None - * K3 8 4Bit None - * L0 8 4Bit None - * L1 8 4Bit None - * L2 8 4Bit None - * L3 8 4Bit None - */ - -#if 0 -static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - return S3C_IRQ_GPIO(chip->base + offset); -} - -static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) -{ - int base; - - base = chip->base - S5PC100_GPH0(0); - if (base == 0) - return IRQ_EINT(offset); - base = chip->base - S5PC100_GPH1(0); - if (base == 0) - return IRQ_EINT(8 + offset); - base = chip->base - S5PC100_GPH2(0); - if (base == 0) - return IRQ_EINT(16 + offset); - base = chip->base - S5PC100_GPH3(0); - if (base == 0) - return IRQ_EINT(24 + offset); - return -EINVAL; -} -#endif -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_eint = { - .cfg_eint = 0xf, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_chip s5pc100_gpio_chips[] = { - { - .base = S5PC100_GPA0_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPA0(0), - .ngpio = S5PC100_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .base = S5PC100_GPA1_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPA1(0), - .ngpio = S5PC100_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .base = S5PC100_GPB_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPB(0), - .ngpio = S5PC100_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5PC100_GPC_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPC(0), - .ngpio = S5PC100_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5PC100_GPD_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPD(0), - .ngpio = S5PC100_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S5PC100_GPE0_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPE0(0), - .ngpio = S5PC100_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .base = S5PC100_GPE1_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPE1(0), - .ngpio = S5PC100_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .base = S5PC100_GPF0_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPF0(0), - .ngpio = S5PC100_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .base = S5PC100_GPF1_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPF1(0), - .ngpio = S5PC100_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .base = S5PC100_GPF2_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPF2(0), - .ngpio = S5PC100_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .base = S5PC100_GPF3_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPF3(0), - .ngpio = S5PC100_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .base = S5PC100_GPG0_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPG0(0), - .ngpio = S5PC100_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .base = S5PC100_GPG1_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPG1(0), - .ngpio = S5PC100_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .base = S5PC100_GPG2_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPG2(0), - .ngpio = S5PC100_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .base = S5PC100_GPG3_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPG3(0), - .ngpio = S5PC100_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .base = S5PC100_GPH0_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH0(0), - .ngpio = S5PC100_GPIO_H0_NR, - .label = "GPH0", - }, - }, { - .base = S5PC100_GPH1_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH1(0), - .ngpio = S5PC100_GPIO_H1_NR, - .label = "GPH1", - }, - }, { - .base = S5PC100_GPH2_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH2(0), - .ngpio = S5PC100_GPIO_H2_NR, - .label = "GPH2", - }, - }, { - .base = S5PC100_GPH3_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH3(0), - .ngpio = S5PC100_GPIO_H3_NR, - .label = "GPH3", - }, - }, { - .base = S5PC100_GPI_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPI(0), - .ngpio = S5PC100_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5PC100_GPJ0_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPJ0(0), - .ngpio = S5PC100_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .base = S5PC100_GPJ1_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPJ1(0), - .ngpio = S5PC100_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .base = S5PC100_GPJ2_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPJ2(0), - .ngpio = S5PC100_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .base = S5PC100_GPJ3_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPJ3(0), - .ngpio = S5PC100_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .base = S5PC100_GPJ4_BASE, - .config = &gpio_cfg, - .chip = { - .base = S5PC100_GPJ4(0), - .ngpio = S5PC100_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .base = S5PC100_GPK0_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK0(0), - .ngpio = S5PC100_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .base = S5PC100_GPK1_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK1(0), - .ngpio = S5PC100_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .base = S5PC100_GPK2_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK2(0), - .ngpio = S5PC100_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .base = S5PC100_GPK3_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK3(0), - .ngpio = S5PC100_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .base = S5PC100_GPL0_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL0(0), - .ngpio = S5PC100_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .base = S5PC100_GPL1_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL1(0), - .ngpio = S5PC100_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .base = S5PC100_GPL2_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL2(0), - .ngpio = S5PC100_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .base = S5PC100_GPL3_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL3(0), - .ngpio = S5PC100_GPIO_L3_NR, - .label = "GPL3", - }, - }, { - .base = S5PC100_GPL4_BASE, - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL4(0), - .ngpio = S5PC100_GPIO_L4_NR, - .label = "GPL4", - }, - }, -}; - -/* FIXME move from irq-gpio.c */ -extern struct irq_chip s5pc1xx_gpioint; -extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); - -static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip) -{ -#if 0 - /* Interrupt */ - if (chip->config == &gpio_cfg) { - int i, irq; - - chip->chip.to_irq = s5pc1xx_gpiolib_to_irq; - - for (i = 0; i < chip->chip.ngpio; i++) { - irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; - set_irq_chip(irq, &s5pc1xx_gpioint); - set_irq_data(irq, &chip->chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - } else if (chip->config == &gpio_cfg_eint) - chip->chip.to_irq = s5pc1xx_gpiolib_to_eint; -#endif -} - -static __init int s5pc1xx_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int nr_chips; - - chip = s5pc100_gpio_chips; - nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - - for (; nr_chips > 0; nr_chips--, chip++) - s5pc100_gpiolib_link(chip); - - samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, - ARRAY_SIZE(s5pc100_gpio_chips)); -#if 0 - /* Interrupt */ - set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler); -#endif - return 0; -} -core_initcall(s5pc1xx_gpiolib_init); diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index e181f578948..22c23859e45 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -13,8 +13,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 @@ -22,12 +22,13 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + .macro addruart, rp, rv, tmp + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif .endm /* include the reset of the code which will do the work, we're only @@ -35,4 +36,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h new file mode 100644 index 00000000000..201842a3769 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_DMA_H +#define __MACH_DMA_H + +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> + +#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S index 67131939e62..bad0700457d 100644 --- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S @@ -12,39 +12,8 @@ * warranty of any kind, whether express or implied. */ -#include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> - - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =S3C_VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S3C_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat .endm diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 29a8a12d9b4..5e1a924b595 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -15,11 +15,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S5PC100_GPIO_A0_NR (8) #define S5PC100_GPIO_A1_NR (5) @@ -146,6 +141,4 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h deleted file mode 100644 index 819acf5eaf8..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S5PC100 systems - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index b53fa48a52c..d2eb4757381 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -11,9 +11,105 @@ #include <plat/irqs.h> -/* LCD */ +/* VIC0: system, DMA, timer */ +#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) +#define IRQ_BATF S5P_IRQ_VIC0(17) +#define IRQ_MDMA S5P_IRQ_VIC0(18) +#define IRQ_PDMA0 S5P_IRQ_VIC0(19) +#define IRQ_PDMA1 S5P_IRQ_VIC0(20) +#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) +#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) +#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) +#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) +#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) +#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) +#define IRQ_WDT S5P_IRQ_VIC0(27) +#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) +#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) +#define IRQ_GPIOINT S5P_IRQ_VIC0(30) + +/* VIC1: ARM, power, memory, connectivity */ +#define IRQ_PMU S5P_IRQ_VIC1(0) +#define IRQ_CORTEX1 S5P_IRQ_VIC1(1) +#define IRQ_CORTEX2 S5P_IRQ_VIC1(2) +#define IRQ_CORTEX3 S5P_IRQ_VIC1(3) +#define IRQ_CORTEX4 S5P_IRQ_VIC1(4) +#define IRQ_IEMAPC S5P_IRQ_VIC1(5) +#define IRQ_IEMIEC S5P_IRQ_VIC1(6) +#define IRQ_ONENAND S5P_IRQ_VIC1(7) +#define IRQ_NFC S5P_IRQ_VIC1(8) +#define IRQ_CFCON S5P_IRQ_VIC1(9) +#define IRQ_UART0 S5P_IRQ_VIC1(10) +#define IRQ_UART1 S5P_IRQ_VIC1(11) +#define IRQ_UART2 S5P_IRQ_VIC1(12) +#define IRQ_UART3 S5P_IRQ_VIC1(13) +#define IRQ_IIC S5P_IRQ_VIC1(14) +#define IRQ_SPI0 S5P_IRQ_VIC1(15) +#define IRQ_SPI1 S5P_IRQ_VIC1(16) +#define IRQ_SPI2 S5P_IRQ_VIC1(17) +#define IRQ_IRDA S5P_IRQ_VIC1(18) +#define IRQ_IIC2 S5P_IRQ_VIC1(19) +#define IRQ_IIC3 S5P_IRQ_VIC1(20) +#define IRQ_HSIRX S5P_IRQ_VIC1(21) +#define IRQ_HSITX S5P_IRQ_VIC1(22) +#define IRQ_UHOST S5P_IRQ_VIC1(23) +#define IRQ_OTG S5P_IRQ_VIC1(24) +#define IRQ_MSM S5P_IRQ_VIC1(25) +#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) +#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) +#define IRQ_MIPICSI S5P_IRQ_VIC1(29) +#define IRQ_MIPIDSI S5P_IRQ_VIC1(30) + +/* VIC2: multimedia, audio, security */ +#define IRQ_LCD0 S5P_IRQ_VIC2(0) +#define IRQ_LCD1 S5P_IRQ_VIC2(1) +#define IRQ_LCD2 S5P_IRQ_VIC2(2) +#define IRQ_LCD3 S5P_IRQ_VIC2(3) +#define IRQ_ROTATOR S5P_IRQ_VIC2(4) +#define IRQ_FIMC0 S5P_IRQ_VIC2(5) +#define IRQ_FIMC1 S5P_IRQ_VIC2(6) +#define IRQ_FIMC2 S5P_IRQ_VIC2(7) +#define IRQ_JPEG S5P_IRQ_VIC2(8) +#define IRQ_2D S5P_IRQ_VIC2(9) +#define IRQ_3D S5P_IRQ_VIC2(10) +#define IRQ_MIXER S5P_IRQ_VIC2(11) +#define IRQ_HDMI S5P_IRQ_VIC2(12) +#define IRQ_IIC1 S5P_IRQ_VIC2(13) +#define IRQ_MFC S5P_IRQ_VIC2(14) +#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_I2S0 S5P_IRQ_VIC2(16) +#define IRQ_I2S1 S5P_IRQ_VIC2(17) +#define IRQ_I2S2 S5P_IRQ_VIC2(18) +#define IRQ_AC97 S5P_IRQ_VIC2(19) +#define IRQ_PCM0 S5P_IRQ_VIC2(20) +#define IRQ_PCM1 S5P_IRQ_VIC2(21) +#define IRQ_SPDIF S5P_IRQ_VIC2(22) +#define IRQ_ADC S5P_IRQ_VIC2(23) +#define IRQ_PENDN S5P_IRQ_VIC2(24) +#define IRQ_TC IRQ_PENDN +#define IRQ_KEYPAD S5P_IRQ_VIC2(25) +#define IRQ_CG S5P_IRQ_VIC2(26) +#define IRQ_SEC S5P_IRQ_VIC2(27) +#define IRQ_SECRX S5P_IRQ_VIC2(28) +#define IRQ_SECTX S5P_IRQ_VIC2(29) +#define IRQ_SDMIRQ S5P_IRQ_VIC2(30) +#define IRQ_SDMFIQ S5P_IRQ_VIC2(31) +#define IRQ_VIC_END S5P_IRQ_VIC2(31) + +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) + +/* GPIO interrupt */ +#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) +#define S5P_GPIOINT_GROUP_MAXNR 21 + +/* Set the default NR_IRQS */ +#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) + +/* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 #define IRQ_LCD_SYSTEM IRQ_LCD2 -#endif /* __ASM_ARCH_IRQ_H */ +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 4681ebe8bef..2550b6112b8 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -1,11 +1,12 @@ /* linux/arch/arm/mach-s5pc100/include/mach/map.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * Based on mach-s3c6400/include/mach/map.h - * - * S5PC1XX - Memory map definitions + * S5PC100 - Memory map definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,135 +17,121 @@ #define __ASM_ARCH_MAP_H __FILE__ #include <plat/map-base.h> +#include <plat/map-s5p.h> -/* - * map-base.h has already defined virtual memory address - * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s) - * S3C_VA_SYS S3C_ADDR(0x00100000) system control - * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used) - * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block - * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog - * S3C_VA_UART S3C_ADDR(0x01000000) UART - * - * S5PC100 specific virtual memory address can be defined here - * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO - * - */ - -/* Chip ID */ -#define S5PC100_PA_CHIPID (0xE0000000) -#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID -#define S5PC1XX_VA_CHIPID S3C_VA_SYS - -/* System */ -#define S5PC100_PA_CLK (0xE0100000) -#define S5PC100_PA_CLK_OTHER (0xE0200000) -#define S5PC100_PA_PWR (0xE0108000) -#define S5PC1XX_PA_CLK S5PC100_PA_CLK -#define S5PC1XX_PA_PWR S5PC100_PA_PWR -#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER -#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000) -#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000) -#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000) - -/* GPIO */ -#define S5PC100_PA_GPIO (0xE0300000) -#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO -#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) - -/* Interrupt */ -#define S5PC100_PA_VIC (0xE4000000) -#define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_PA_VIC_OFFSET 0x100000 -#define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) -#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) - -/* DMA */ -#define S5PC100_PA_MDMA (0xE8100000) -#define S5PC100_PA_PDMA0 (0xE9000000) -#define S5PC100_PA_PDMA1 (0xE9200000) - -/* Timer */ -#define S5PC100_PA_TIMER (0xEA000000) -#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER -#define S5PC1XX_VA_TIMER S3C_VA_TIMER - -/* RTC */ -#define S5PC100_PA_RTC (0xEA300000) +#define S5PC100_PA_SDRAM 0x20000000 + +#define S5PC100_PA_ONENAND 0xE7100000 +#define S5PC100_PA_ONENAND_BUF 0xB0000000 + +#define S5PC100_PA_CHIPID 0xE0000000 + +#define S5PC100_PA_SYSCON 0xE0100000 + +#define S5PC100_PA_OTHERS 0xE0200000 + +#define S5PC100_PA_GPIO 0xE0300000 + +#define S5PC100_PA_VIC0 0xE4000000 +#define S5PC100_PA_VIC1 0xE4100000 +#define S5PC100_PA_VIC2 0xE4200000 + +#define S5PC100_PA_SROMC 0xE7000000 + +#define S5PC100_PA_CFCON 0xE7800000 + +#define S5PC100_PA_MDMA 0xE8100000 +#define S5PC100_PA_PDMA0 0xE9000000 +#define S5PC100_PA_PDMA1 0xE9200000 + +#define S5PC100_PA_TIMER 0xEA000000 +#define S5PC100_PA_SYSTIMER 0xEA100000 +#define S5PC100_PA_WATCHDOG 0xEA200000 +#define S5PC100_PA_RTC 0xEA300000 + +#define S5PC100_PA_UART 0xEC000000 + +#define S5PC100_PA_IIC0 0xEC100000 +#define S5PC100_PA_IIC1 0xEC200000 + +#define S5PC100_PA_SPI0 0xEC300000 +#define S5PC100_PA_SPI1 0xEC400000 +#define S5PC100_PA_SPI2 0xEC500000 + +#define S5PC100_PA_USB_HSOTG 0xED200000 +#define S5PC100_PA_USB_HSPHY 0xED300000 + +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) + +#define S5PC100_PA_FB 0xEE000000 + +#define S5PC100_PA_FIMC0 0xEE200000 +#define S5PC100_PA_FIMC1 0xEE300000 +#define S5PC100_PA_FIMC2 0xEE400000 + +#define S5PC100_PA_I2S0 0xF2000000 +#define S5PC100_PA_I2S1 0xF2100000 +#define S5PC100_PA_I2S2 0xF2200000 + +#define S5PC100_PA_AC97 0xF2300000 + +#define S5PC100_PA_PCM0 0xF2400000 +#define S5PC100_PA_PCM1 0xF2500000 + +#define S5PC100_PA_SPDIF 0xF2600000 + +#define S5PC100_PA_TSADC 0xF3000000 + +#define S5PC100_PA_KEYPAD 0xF3100000 + +/* Compatibiltiy Defines */ + +#define S3C_PA_FB S5PC100_PA_FB +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) +#define S3C_PA_IIC S5PC100_PA_IIC0 +#define S3C_PA_IIC1 S5PC100_PA_IIC1 +#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD +#define S3C_PA_ONENAND S5PC100_PA_ONENAND +#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF +#define S3C_PA_RTC S5PC100_PA_RTC +#define S3C_PA_TSADC S5PC100_PA_TSADC +#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG +#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY +#define S3C_PA_WDT S5PC100_PA_WATCHDOG +#define S3C_PA_SPI0 S5PC100_PA_SPI0 +#define S3C_PA_SPI1 S5PC100_PA_SPI1 +#define S3C_PA_SPI2 S5PC100_PA_SPI2 + +#define S5P_PA_CHIPID S5PC100_PA_CHIPID +#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 +#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 +#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 +#define S5P_PA_SDRAM S5PC100_PA_SDRAM +#define S5P_PA_SROMC S5PC100_PA_SROMC +#define S5P_PA_SYSCON S5PC100_PA_SYSCON +#define S5P_PA_TIMER S5PC100_PA_TIMER + +#define SAMSUNG_PA_ADC S5PC100_PA_TSADC +#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD +#define SAMSUNG_PA_TIMER S5PC100_PA_TIMER + +#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) + +#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M) /* UART */ -#define S5PC100_PA_UART (0xEC000000) -#define S5PC1XX_PA_UART S5PC100_PA_UART -#define S5PC1XX_VA_UART S3C_VA_UART - -/* I2C */ -#define S5PC100_PA_I2C (0xEC100000) -#define S5PC100_PA_I2C1 (0xEC200000) - -/* USB HS OTG */ -#define S5PC100_PA_USB_HSOTG (0xED200000) -#define S5PC100_PA_USB_HSPHY (0xED300000) - -/* SD/MMC */ -#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0) -#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1) -#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2) - -/* LCD */ -#define S5PC100_PA_FB (0xEE000000) - -/* Multimedia */ -#define S5PC100_PA_G2D (0xEE800000) -#define S5PC100_PA_JPEG (0xEE500000) -#define S5PC100_PA_ROTATOR (0xEE100000) -#define S5PC100_PA_G3D (0xEF000000) - -/* I2S */ -#define S5PC100_PA_I2S0 (0xF2000000) -#define S5PC100_PA_I2S1 (0xF2100000) -#define S5PC100_PA_I2S2 (0xF2200000) - -/* KEYPAD */ -#define S5PC100_PA_KEYPAD (0xF3100000) - -/* ADC & TouchScreen */ -#define S5PC100_PA_TSADC (0xF3000000) - -/* ETC */ -#define S5PC100_PA_SDRAM (0x20000000) -#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM - -/* compatibility defines. */ -#define S3C_PA_RTC S5PC100_PA_RTC -#define S3C_PA_UART S5PC100_PA_UART -#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0) -#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400) -#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800) -#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00) -#define S3C_VA_UART0 (S3C_VA_UART + 0x0) -#define S3C_VA_UART1 (S3C_VA_UART + 0x400) -#define S3C_VA_UART2 (S3C_VA_UART + 0x800) -#define S3C_VA_UART3 (S3C_VA_UART + 0xC00) -#define S3C_UART_OFFSET 0x400 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) -#define S3C_PA_FB S5PC100_PA_FB -#define S3C_PA_G2D S5PC100_PA_G2D -#define S3C_PA_G3D S5PC100_PA_G3D -#define S3C_PA_JPEG S5PC100_PA_JPEG -#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR -#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0) -#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) -#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000) -#define S3C_PA_IIC S5PC100_PA_I2C -#define S3C_PA_IIC1 S5PC100_PA_I2C1 -#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG -#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY -#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0 -#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1 -#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2 -#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD -#define S3C_PA_TSADC S5PC100_PA_TSADC - -#endif /* __ASM_ARCH_C100_MAP_H */ + +#define S3C_PA_UART S5PC100_PA_UART + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) + +#define S5P_SZ_UART SZ_256 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h deleted file mode 100644 index 4b60d18179f..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/memory.h - * - * Copyright 2008 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on mach-s3c6400/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x20000000) - -#endif diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h deleted file mode 100644 index b34d2f7aae5..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - pwm clock and timer support - * - * Based on mach-s3c6400/include/mach/pwm-clock.h - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h index f2283bdc941..bc92da2e0ba 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h @@ -17,6 +17,8 @@ #define S5P_CLKREG(x) (S3C_VA_SYS + (x)) +#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x)) + #define S5P_APLL_LOCK S5P_CLKREG(0x00) #define S5P_MPLL_LOCK S5P_CLKREG(0x04) #define S5P_EPLL_LOCK S5P_CLKREG(0x08) @@ -68,4 +70,11 @@ #define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16) #define S5P_CLKDIV1_PCLKD1_SHIFT (16) +#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000) +#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200) + +#define S5PC100_SWRESET_RESETVAL 0xc100 + +#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30 + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h deleted file mode 100644 index 1732cd28c76..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h +++ /dev/null @@ -1,139 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/regs-fb.h - * - * Copyright 2009 Samsung Electronics Co. - * Pawel Osciak <p.osciak@samsung.com> - * - * Framebuffer register definitions for Samsung S5PC100. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_FB_H -#define __ASM_ARCH_REGS_FB_H __FILE__ - -#include <plat/regs-fb-v4.h> - -/* VP1 interface timing control */ -#define VP1CON0 (0x118) -#define VP1_RATECON_EN (1 << 31) -#define VP1_CLKRATE_MASK (0xff) - -#define VP1CON1 (0x11c) -#define VP1_VTREGCON_EN (1 << 31) -#define VP1_VBPD_MASK (0xfff) -#define VP1_VBPD_SHIFT (16) - - -#define WPALCON_H (0x19c) -#define WPALCON_L (0x1a0) - -/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but - * different for WPAL2-4 - */ -/* In WPALCON_L (aka WPALCON) */ -#define WPALCON_W1PAL_32BPP_A888 (0x7 << 3) -#define WPALCON_W0PAL_32BPP_A888 (0x7 << 0) - -/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H, - * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]). - */ -#define WPALCON_L_WxPAL_L_MASK (0x1) -#define WPALCON_L_W2PAL_L_SHIFT (6) -#define WPALCON_L_W3PAL_L_SHIFT (7) -#define WPALCON_L_W4PAL_L_SHIFT (8) - -#define WPALCON_L_WxPAL_H_MASK (0x3) -#define WPALCON_H_W2PAL_H_SHIFT (9) -#define WPALCON_H_W3PAL_H_SHIFT (13) -#define WPALCON_H_W4PAL_H_SHIFT (17) - -/* Per-window alpha value registers */ -/* For window 0 8-bit alpha values are in VIDW0ALPHAx, - * for windows 1-4 alpha values consist of two parts, the 4 low bits are - * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC, - * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0]) - */ -#define VIDWxALPHA0(_win) (0x200 + (_win * 8)) -#define VIDWxALPHA1(_win) (0x204 + (_win * 8)) - -/* Only for window 0 in VIDW0ALPHAx. */ -#define VIDW0ALPHAx_R(_x) ((_x) << 16) -#define VIDW0ALPHAx_R_MASK (0xff << 16) -#define VIDW0ALPHAx_R_SHIFT (16) -#define VIDW0ALPHAx_G(_x) ((_x) << 8) -#define VIDW0ALPHAx_G_MASK (0xff << 8) -#define VIDW0ALPHAx_G_SHIFT (8) -#define VIDW0ALPHAx_B(_x) ((_x) << 0) -#define VIDW0ALPHAx_B_MASK (0xff << 0) -#define VIDW0ALPHAx_B_SHIFT (0) - -/* Low 4 bits of alpha0-1 for windows 1-4 */ -#define VIDW14ALPHAx_R_L(_x) ((_x) << 16) -#define VIDW14ALPHAx_R_L_MASK (0xf << 16) -#define VIDW14ALPHAx_R_L_SHIFT (16) -#define VIDW14ALPHAx_G_L(_x) ((_x) << 8) -#define VIDW14ALPHAx_G_L_MASK (0xf << 8) -#define VIDW14ALPHAx_G_L_SHIFT (8) -#define VIDW14ALPHAx_B_L(_x) ((_x) << 0) -#define VIDW14ALPHAx_B_L_MASK (0xf << 0) -#define VIDW14ALPHAx_B_L_SHIFT (0) - - -/* Per-window blending equation control registers */ -#define BLENDEQx(_win) (0x244 + ((_win) * 4)) -#define BLENDEQ1 (0x244) -#define BLENDEQ2 (0x248) -#define BLENDEQ3 (0x24c) -#define BLENDEQ4 (0x250) - -#define BLENDEQx_Q_FUNC(_x) ((_x) << 18) -#define BLENDEQx_Q_FUNC_MASK (0xf << 18) -#define BLENDEQx_P_FUNC(_x) ((_x) << 12) -#define BLENDEQx_P_FUNC_MASK (0xf << 12) -#define BLENDEQx_B_FUNC(_x) ((_x) << 6) -#define BLENDEQx_B_FUNC_MASK (0xf << 6) -#define BLENDEQx_A_FUNC(_x) ((_x) << 0) -#define BLENDEQx_A_FUNC_MASK (0xf << 0) - -#define BLENDCON (0x260) -#define BLENDCON_8BIT_ALPHA (1 << 0) - -/* Per-window palette base addresses (start of palette memory). - * Each window palette area consists of 256 32-bit entries. - * START is the first address (entry 0th), END is the address of 255th entry. - */ -#define WIN0_PAL_BASE (0x2400) -#define WIN0_PAL_END (0x27fc) -#define WIN1_PAL_BASE (0x2800) -#define WIN1_PAL_END (0x2bfc) -#define WIN2_PAL_BASE (0x2c00) -#define WIN2_PAL_END (0x2ffc) -#define WIN3_PAL_BASE (0x3000) -#define WIN3_PAL_END (0x33fc) -#define WIN4_PAL_BASE (0x3400) -#define WIN4_PAL_END (0x37fc) - -#define WIN0_PAL(_entry) (WIN0_PAL_BASE + ((_entry) * 4)) -#define WIN1_PAL(_entry) (WIN1_PAL_BASE + ((_entry) * 4)) -#define WIN2_PAL(_entry) (WIN2_PAL_BASE + ((_entry) * 4)) -#define WIN3_PAL(_entry) (WIN3_PAL_BASE + ((_entry) * 4)) -#define WIN4_PAL(_entry) (WIN4_PAL_BASE + ((_entry) * 4)) - -static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) -{ - switch (window) { - case 0: return WIN0_PAL(reg); - case 1: return WIN1_PAL(reg); - case 2: return WIN2_PAL(reg); - case 3: return WIN3_PAL(reg); - case 4: return WIN4_PAL(reg); - } - - BUG(); -} - - -#endif /* __ASM_ARCH_REGS_FB_H */ - diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index 68666913354..0bf73209ec7 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h +/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> @@ -11,60 +11,28 @@ #include <mach/map.h> -/* S5PC100 */ -#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO -#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000) -#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020) -#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040) -#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060) -#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080) -#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0) -#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0) -#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0) -#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100) -#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120) -#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140) -#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160) -#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180) -#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0) -#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0) -#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00) -#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20) -#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40) -#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60) -#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0) -#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200) -#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220) -#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240) -#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260) -#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280) -#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0) -#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0) -#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0) -#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300) -#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320) -#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340) -#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360) -#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380) -#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0) -#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00) +#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00) +#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4)) -#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68) -#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80) +#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4)) -/* PDNEN */ -#define S5PC100_PDNEN_CFG_PDNEN (1 << 1) -#define S5PC100_PDNEN_CFG_AUTO (0 << 1) -#define S5PC100_PDNEN_POWERDOWN (1 << 0) -#define S5PC100_PDNEN_NORMAL (0 << 0) +#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00) +#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4)) -/* Common part */ -/* External interrupt base is same at both s5pc100 and s5pc110 */ -#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE) +#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40) +#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4)) -#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) -#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +#define EINT_MODE S3C_GPIO_SFN(0x2) + +#define EINT_GPIO_0(x) S5PC100_GPH0(x) +#define EINT_GPIO_1(x) S5PC100_GPH1(x) +#define EINT_GPIO_2(x) S5PC100_GPH2(x) +#define EINT_GPIO_3(x) S5PC100_GPH3(x) #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h index 751ac15438c..761627897f3 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h @@ -3,7 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * S5PC1XX - IRQ register definitions + * S5PC100 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,11 +14,5 @@ #define __ASM_ARCH_REGS_IRQ_H __FILE__ #include <mach/map.h> -#include <asm/hardware/vic.h> - -/* interrupt controller */ -#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0)) -#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1)) -#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2)) #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h deleted file mode 100644 index f0d31a2a598..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/system.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX - system implementation - * - * Based on mach-s3c6400/include/mach/system.h - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include <linux/io.h> -#include <mach/map.h> -#include <plat/regs-clock.h> - -void (*s5pc1xx_idle)(void); - -static void arch_idle(void) -{ - if (s5pc1xx_idle) - s5pc1xx_idle(); -} - -static void arch_reset(char mode, const char *cmd) -{ - __raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET); - return; -} -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h deleted file mode 100644 index f338c9eec71..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/tick.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S3C64XX - Timer tick support definitions - * - * Based on mach-s3c6400/include/mach/tick.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0)); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h deleted file mode 100644 index 47ffb17aff9..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h deleted file mode 100644 index 01ccf535e76..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/uncompress.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/uncompress.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - uncompress code - * - * Based on mach-s3c6400/include/mach/uncompress.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ - fifo_mask = S3C2440_UFSTAT_TXMASK; - fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h deleted file mode 100644 index be9df79903e..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C6400 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xe0000000UL) - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index bfe67db34f0..668af3ac31f 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -16,70 +16,93 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/fb.h> #include <linux/delay.h> +#include <linux/input.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/map.h> -#include <mach/regs-fb.h> +#include <mach/regs-gpio.h> + #include <video/platform_lcd.h> +#include <video/samsung_fimd.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/s5pc100.h> #include <plat/fb.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/ata-samsung_cf.h> +#include <plat/adc.h> +#include <plat/keypad.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/asoc-s3c.h> +#include <plat/backlight.h> +#include <plat/samsung-time.h> + +#include "common.h" + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8 -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) +#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_RXTRIG8 | \ + S3C2440_UFCON_TXTRIG16) static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, [3] = { .hwport = 3, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = SMDKC100_UCON_DEFAULT, + .ulcon = SMDKC100_ULCON_DEFAULT, + .ufcon = SMDKC100_UFCON_DEFAULT, }, }; /* I2C0 */ static struct i2c_board_info i2c_devs0[] __initdata = { + {I2C_BOARD_INFO("wm8580", 0x1b),}, }; /* I2C1 */ @@ -90,9 +113,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = { static void smdkc100_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) { - /* backlight */ - gpio_direction_output(S5PC100_GPD(0), power); - if (power) { /* module reset */ gpio_direction_output(S5PC100_GPH0(6), 1); @@ -116,51 +136,101 @@ static struct platform_device smdkc100_lcd_powerdev = { /* Frame Buffer */ static struct s3c_fb_pd_win smdkc100_fb_win0 = { - /* this is to ensure we use win0 */ - .win_mode = { - .refresh = 70, - .pixclock = (8+13+3+800)*(7+5+1+480), - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdkc100_lcd_timing = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + .refresh = 80, }; static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { .win[0] = &smdkc100_fb_win0, + .vtiming = &smdkc100_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = s5pc100_fb_gpio_setup_24bpp, }; -static struct map_desc smdkc100_iodesc[] = {}; +static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = { + .setup_gpio = s5pc100_ide_setup_gpio, +}; + +static uint32_t smdkc100_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), + KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), + KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) +}; + +static struct matrix_keymap_data smdkc100_keymap_data __initdata = { + .keymap = smdkc100_keymap, + .keymap_size = ARRAY_SIZE(smdkc100_keymap), +}; + +static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = { + .keymap_data = &smdkc100_keymap_data, + .rows = 2, + .cols = 8, +}; static struct platform_device *smdkc100_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_cfcon, &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_fb, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, + &samsung_device_pwm, + &s3c_device_ts, + &s3c_device_wdt, &smdkc100_lcd_powerdev, + &s5pc100_device_iis0, + &samsung_device_keypad, + &s5pc100_device_ac97, + &s3c_device_rtc, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5pc100_device_spdif, +}; + +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = { + .no = S5PC100_GPD(0), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdkc100_bl_data = { + .pwm_id = 0, + .enable_gpio = -1, }; static void __init smdkc100_map_io(void) { - s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc)); + s5pc100_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdkc100_machine_init(void) { + s3c24xx_ts_set_platdata(NULL); + /* I2C */ s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); @@ -168,22 +238,27 @@ static void __init smdkc100_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); s3c_fb_set_platdata(&smdkc100_lcd_pdata); + s3c_ide_set_platdata(&smdkc100_ide_pdata); + + samsung_keypad_set_platdata(&smdkc100_keypad_data); + + s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD); /* LCD init */ - gpio_request(S5PC100_GPD(0), "GPD"); gpio_request(S5PC100_GPH0(6), "GPH0"); smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0); + platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); + + samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data); } MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .phys_io = S5PC100_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S5PC100_PA_SDRAM + 0x100, - + .atag_offset = 0x100, .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, - .timer = &s3c24xx_timer, + .init_time = samsung_timer_init, + .restart = s5pc100_restart, MACHINE_END diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c index 6eba6cb8e2f..8978e4cf9ed 100644 --- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c @@ -15,34 +15,21 @@ #include <linux/fb.h> #include <linux/gpio.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> #define DISR_OFFSET 0x7008 -void s5pc100_fb_gpio_setup_24bpp(void) +static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr) { - unsigned int gpio = 0; - - for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2)); +} - for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } +void s5pc100_fb_gpio_setup_24bpp(void) +{ + s5pc100_fb_setgpios(S5PC100_GPF0(0), 8); + s5pc100_fb_setgpios(S5PC100_GPF1(0), 8); + s5pc100_fb_setgpios(S5PC100_GPF2(0), 8); + s5pc100_fb_setgpios(S5PC100_GPF3(0), 4); } diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c index dd3174e6ecc..89a6a769d62 100644 --- a/arch/arm/mach-s5pc100/setup-i2c0.c +++ b/arch/arm/mach-s5pc100/setup-i2c0.c @@ -18,13 +18,11 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPD(3), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c index d1fec26b69e..faa667ef02c 100644 --- a/arch/arm/mach-s5pc100/setup-i2c1.c +++ b/arch/arm/mach-s5pc100/setup-i2c1.c @@ -18,13 +18,11 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPD(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c new file mode 100644 index 00000000000..223aae04446 --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-ide.c @@ -0,0 +1,57 @@ +/* linux/arch/arm/mach-s5pc100/setup-ide.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PC100 setup information for IDE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/regs-clock.h> +#include <plat/gpio-cfg.h> + +static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr) +{ + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4)); + + for (; nr > 0; nr--, base++) + s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); +} + +void s5pc100_ide_setup_gpio(void) +{ + u32 reg; + + /* Independent CF interface, CF chip select configuration */ + reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f); + writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG); + + /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ + s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8); + + /*CF_Data[0 - 7] */ + s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8); + + /* CF_Data[8 - 15] */ + s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8); + + /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ + s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4); + + /* EBI_OE, EBI_WE */ + s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0)); + + /* CF_OE, CF_WE */ + s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2)); + + /* CF_CD */ + s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE); +} diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c new file mode 100644 index 00000000000..ada377f0c20 --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-keypad.c @@ -0,0 +1,23 @@ +/* linux/arch/arm/mach-s5pc100/setup-keypad.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * GPIO configuration for S5PC100 KeyPad device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) +{ + /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ + s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3)); + + /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ + s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3)); +} diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c new file mode 100644 index 00000000000..6010c0310cb --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c + * + * Copyright 2009 Samsung Eletronics + * + * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <plat/gpio-cfg.h> +#include <plat/sdhci.h> + +void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int num; + + num = width; + /* In case of 8 width, we should decrease the 2 */ + if (width == 8) + num = width - 2; + + /* Set all the necessary GPG0/GPG1 pins to special-function 0 */ + s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2)); + + if (width == 8) + s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2)); + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2)); + } +} + +void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + + /* Set all the necessary GPG2 pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2)); + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2)); + } +} + +void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + + /* Set all the necessary GPG3 pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2)); + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2)); + } +} diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c deleted file mode 100644 index ea7ff19adb9..00000000000 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ /dev/null @@ -1,65 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/setup-sdhci.c - * - * Copyright 2008 Samsung Electronics - * - * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * Based on mach-s3c6410/setup-sdhci.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s5pc100_hsmmc_clksrcs[4] = { - [0] = "hsmmc", - [1] = "hsmmc", - /* [2] = "mmc_bus", not yet successfully used yet */ - /* [3] = "48m", - note not successfully used yet */ -}; - - -void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything acording to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c new file mode 100644 index 00000000000..183567961de --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-spi.c @@ -0,0 +1,41 @@ +/* linux/arch/arm/mach-s5pc100/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +int s3c64xx_spi0_cfg_gpio(void) +{ + s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +int s3c64xx_spi1_cfg_gpio(void) +{ + s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI2 +int s3c64xx_spi2_cfg_gpio(void) +{ + s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); + s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPB(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); + return 0; +} +#endif |