diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx/include')
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/dma.h | 144 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h (renamed from arch/arm/mach-s3c64xx/include/mach/gpio.h) | 9 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/pm-core.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/tick.h | 31 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/timex.h | 24 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/uncompress.h | 31 |
7 files changed, 50 insertions, 193 deletions
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index dd9ccca5de1..c9b95325b67 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index fe1a98cf0e4..059b1fc8503 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -11,51 +11,48 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#define S3C_DMA_CHANNELS (16) +#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) + +/* DMA0/SDMA0 */ +#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx") +#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx") +#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx") +#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx") +#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx") +#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx") +#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx") +#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx") +#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx") +#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx") +#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx") +#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx") +#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx") +#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx") +#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx") +#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx") + +/* DMA1/SDMA1 */ +#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx") +#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx") +#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx") +#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx") +#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx") +#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx") +#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out") +#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in") +#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic") +#define DMACH_PWM S3C64XX_DMA_CHAN("pwm") +#define DMACH_IRDA S3C64XX_DMA_CHAN("irda") +#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external") +#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx") +#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx") -/* see mach-s3c2410/dma.h for notes on dma channel numbers */ - -/* Note, for the S3C64XX architecture we keep the DMACH_ - * defines in the order they are allocated to [S]DMA0/[S]DMA1 - * so that is easy to do DHACH_ -> DMA controller conversion - */ enum dma_ch { - /* DMA0/SDMA0 */ - DMACH_UART0 = 0, - DMACH_UART0_SRC2, - DMACH_UART1, - DMACH_UART1_SRC2, - DMACH_UART2, - DMACH_UART2_SRC2, - DMACH_UART3, - DMACH_UART3_SRC2, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_OUT, - DMACH_I2S0_IN, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_HSI_I2SV40_TX, - DMACH_HSI_I2SV40_RX, + DMACH_MAX = 32 +}; - /* DMA1/SDMA1 */ - DMACH_PCM1_TX = 16, - DMACH_PCM1_RX, - DMACH_I2S1_OUT, - DMACH_I2S1_IN, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_AC97_PCMOUT, - DMACH_AC97_PCMIN, - DMACH_AC97_MICIN, - DMACH_PWM, - DMACH_IRDA, - DMACH_EXTERNAL, - DMACH_RES1, - DMACH_RES2, - DMACH_SECURITY_RX, /* SDMA1 only */ - DMACH_SECURITY_TX, /* SDMA1 only */ - DMACH_MAX /* the end */ +struct s3c2410_dma_client { + char *name; }; static inline bool samsung_dma_has_circular(void) @@ -65,67 +62,10 @@ static inline bool samsung_dma_has_circular(void) static inline bool samsung_dma_is_dmadev(void) { - return false; + return true; } -#define S3C2410_DMAF_CIRCULAR (1 << 0) - -#include <plat/dma.h> - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -struct s3c64xx_dma_buff; - -/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor - * @next: Pointer to next buffer in queue or ring. - * @pw: Client provided identifier - * @lli: Pointer to hardware descriptor this buffer is associated with. - * @lli_dma: Hardare address of the descriptor. - */ -struct s3c64xx_dma_buff { - struct s3c64xx_dma_buff *next; - - void *pw; - struct pl080s_lli *lli; - dma_addr_t lli_dma; -}; - -struct s3c64xx_dmac; - -struct s3c2410_dma_chan { - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char bit; /* bit for enable/disable/etc */ - unsigned char hw_width; - unsigned char peripheral; - - unsigned int flags; - enum dma_data_direction source; - - - dma_addr_t dev_addr; - - struct s3c2410_dma_client *client; - struct s3c64xx_dmac *dmac; /* pointer to controller */ - - void __iomem *regs; - - /* cdriver callbacks */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* buffer list and information */ - struct s3c64xx_dma_buff *curr; /* current dma buffer */ - struct s3c64xx_dma_buff *next; /* next buffer to load */ - struct s3c64xx_dma_buff *end; /* end of queue */ - - /* note, when channel is running in circular mode, curr is the - * first buffer enqueued, end is the last and curr is where the - * last buffer-done event is set-at. The buffers are not freed - * and the last buffer hardware descriptor points back to the - * first. - */ -}; -#include <plat/dma-core.h> +#include <linux/amba/pl08x.h> +#include <plat/dma-ops.h> #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h index 8b540c42d5d..9c81fac3b2d 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c6400/include/mach/gpio.h - * +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -12,6 +11,9 @@ * published by the Free Software Foundation. */ +#ifndef GPIO_SAMSUNG_S3C64XX_H +#define GPIO_SAMSUNG_S3C64XX_H + /* GPIO bank sizes */ #define S3C64XX_GPIO_A_NR (8) #define S3C64XX_GPIO_B_NR (7) @@ -88,6 +90,5 @@ enum s3c_gpio_number { /* define the number of gpios we need to the one after the GPQ() range */ #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) -#define BOARD_NR_GPIOS (16 + CONFIG_SAMSUNG_GPIO_EXTRA) +#endif /* GPIO_SAMSUNG_S3C64XX_H */ -#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index c0537f40a3d..a30a1e3ffc6 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -15,6 +15,8 @@ #ifndef __MACH_S3C64XX_PM_CORE_H #define __MACH_S3C64XX_PM_CORE_H __FILE__ +#include <linux/serial_s3c.h> + #include <mach/regs-gpio.h> static inline void s3c_pm_debug_init_uart(void) diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h deleted file mode 100644 index db9c1b1d56a..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/tick.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/tick.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -#include <linux/irqchip/arm-vic.h> - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_6400_TICK_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h deleted file mode 100644 index fb2e8cd4082..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h deleted file mode 100644 index 1c956738b42..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/uncompress.h +++ /dev/null @@ -1,31 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/uncompress.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ - fifo_mask = S3C2440_UFSTAT_TXMASK; - fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; - - uart_base = (volatile u8 *)S3C_PA_UART + - (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ |