5 files changed, 0 insertions, 473 deletions
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
deleted file mode 100644
index 1d501007002..00000000000
--- a/arch/arm/mach-s3c6410/Kconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-# arch/arm/mach-s3c6410/Kconfig
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6410
-	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
-	help
-	  Enable S3C6410 CPU support
-
-config S3C6410_SETUP_SDHCI
-	bool
-	help
-	  Internal helper functions for S3C6410 based SDHCI systems
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select S3C_DEV_FB
-	select S3C6410_SETUP_SDHCI
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_FB_24BPP
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-       
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
deleted file mode 100644
index 2cd4f189036..00000000000
--- a/arch/arm/mach-s3c6410/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410)	+= cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
deleted file mode 100644
index 6a73ca6b7a3..00000000000
--- a/arch/arm/mach-s3c6410/cpu.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c6410_iodesc[] __initdata = {
-};
-
-/* s3c6410_map_io
- *
- * register the standard cpu IO areas
-*/
-
-void __init s3c6410_map_io(void)
-{
-	iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
-
-	/* initialise device information early */
-	s3c6410_default_sdhci0();
-	s3c6410_default_sdhci1();
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-}
-
-void __init s3c6410_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c24xx_register_baseclocks(xtal);
-	s3c64xx_register_clocks();
-	s3c6400_register_clocks();
-	s3c6400_setup_clocks();
-}
-
-void __init s3c6410_init_irq(void)
-{
-	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
-	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
-}
-
-struct sysdev_class s3c6410_sysclass = {
-	.name	= "s3c6410-core",
-};
-
-static struct sys_device s3c6410_sysdev = {
-	.cls	= &s3c6410_sysclass,
-};
-
-static int __init s3c6410_core_init(void)
-{
-	return sysdev_class_register(&s3c6410_sysclass);
-}
-
-core_initcall(s3c6410_core_init);
-
-int __init s3c6410_init(void)
-{
-	printk("S3C6410: Initialising architecture\n");
-
-	return sysdev_register(&s3c6410_sysdev);
-}
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
deleted file mode 100644
index 25f7935576f..00000000000
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-/* framebuffer and LCD setup. */
-
-/* GPF15 = LCD backlight control
- * GPF13 => Panel power
- * GPN5 = LCD nRESET signal
- * PWM_TOUT1 => backlight brightness
- */
-
-static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		gpio_direction_output(S3C64XX_GPF(13), 1);
-		gpio_direction_output(S3C64XX_GPF(15), 1);
-
-		/* fire nRESET on power up */
-		gpio_direction_output(S3C64XX_GPN(5), 0);
-		msleep(10);
-		gpio_direction_output(S3C64XX_GPN(5), 1);
-		msleep(1);
-	} else {
-		gpio_direction_output(S3C64XX_GPF(15), 0);
-		gpio_direction_output(S3C64XX_GPF(13), 0);
-	}
-}
-
-static struct plat_lcd_data smdk6410_lcd_power_data = {
-	.set_power	= smdk6410_lcd_power_set,
-};
-
-static struct platform_device smdk6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdk6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win smdk6410_fb_win0 = {
-	/* this is to ensure we use win0 */
-	.win_mode	= {
-		.pixclock	= 41094,
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &smdk6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct map_desc smdk6410_iodesc[] = {};
-
-static struct platform_device *smdk6410_devices[] __initdata = {
-#ifdef CONFIG_SMDK6410_SD_CH0
-	&s3c_device_hsmmc0,
-#endif
-#ifdef CONFIG_SMDK6410_SD_CH1
-	&s3c_device_hsmmc1,
-#endif
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&smdk6410_lcd_powerdev,
-};
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
-};
-
-static void __init smdk6410_map_io(void)
-{
-	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
-}
-
-static void __init smdk6410_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
-}
-
-MACHINE_START(SMDK6410, "SMDK6410")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
-
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smdk6410_map_io,
-	.init_machine	= smdk6410_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
deleted file mode 100644
index 0b5788bd598..00000000000
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	[2] = "mmc_bus",
-	/* [3] = "48m", - note not succesfully used yet */
-};
-
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything acording to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}