diff options
Diffstat (limited to 'arch/arm/mach-s3c24xx')
126 files changed, 4538 insertions, 5977 deletions
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 25df14a9e26..ad5316ae524 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -9,6 +9,17 @@ if ARCH_S3C24XX +config PLAT_S3C24XX + def_bool y + select ARCH_REQUIRE_GPIOLIB + select NO_IOPORT_MAP + select S3C_DEV_NAND + select IRQ_DOMAIN + help + Base platform code for any Samsung S3C24XX device + + + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -17,19 +28,19 @@ config CPU_S3C2410 bool "SAMSUNG S3C2410" default y select CPU_ARM920T - select CPU_LLSERIAL_S3C2410 - select S3C2410_CLOCK - select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + select S3C2410_COMMON_CLK + select S3C2410_DMA if S3C24XX_DMA + select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM + select SAMSUNG_WDT_RESET help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. config CPU_S3C2412 bool "SAMSUNG S3C2412" - depends on ARCH_S3C24XX select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 + select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help @@ -37,21 +48,17 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" - depends on ARCH_S3C24XX select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line config CPU_S3C2440 bool "SAMSUNG S3C2440" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA help @@ -60,8 +67,8 @@ config CPU_S3C2440 config CPU_S3C2442 bool "SAMSUNG S3C2442" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK + select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help Support for S3C2442 Samsung Mobile CPU based systems. @@ -69,15 +76,13 @@ config CPU_S3C2442 config CPU_S3C244X def_bool y depends on CPU_S3C2440 || CPU_S3C2442 + select SAMSUNG_WDT_RESET config CPU_S3C2443 bool "SAMSUNG S3C2443" - depends on ARCH_S3C24XX select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line @@ -111,10 +116,24 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. +config S3C24XX_DMA + bool "S3C2410 DMA support (deprecated)" + select S3C_DMA + help + S3C2410 DMA support. This is needed for drivers like sound which + use the S3C2410's DMA system to move data to and from the + peripheral blocks. + +config S3C2410_DMA_DEBUG + bool "S3C2410 DMA support debug" + depends on S3C2410_DMA + help + Enable debugging output for the DMA code. This option sends info + to the kernel log, at priority KERN_DEBUG. + config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 help DMA device selection for S3C2410 and compatible CPUs @@ -123,10 +142,53 @@ config S3C2410_PM help Power Management code common to S3C2410 and better +config S3C24XX_PLL + bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" + depends on ARM_S3C24XX_CPUFREQ + help + Compile in support for changing the PLL frequency from the + S3C24XX series CPUfreq driver. The PLL takes time to settle + after a frequency change, so by default it is not enabled. + + This also means that the PLL tables for the selected CPU(s) will + be built which may increase the size of the kernel image. + +# cpu frequency items common between s3c2410 and s3c2440/s3c2442 + +config S3C2410_IOTIMING + bool + depends on ARM_S3C24XX_CPUFREQ + help + Internal node to select io timing code that is common to the s3c2410 + and s3c2440/s3c2442 cpu frequency support. + +config S3C2410_CPUFREQ_UTILS + bool + depends on ARM_S3C24XX_CPUFREQ + help + Internal node to select timing code that is common to the s3c2410 + and s3c2440/s3c244 cpu frequency support. + +# cpu frequency support common to s3c2412, s3c2413 and s3c2442 + +config S3C2412_IOTIMING + bool + depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) + help + Intel node to select io timing code that is common to the s3c2412 + and the s3c2443. + # cpu-specific sections if CPU_S3C2410 +config S3C2410_PLL + bool + depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL + default y + help + Select the PLL table for the S3C2410 + config S3C24XX_SIMTEC_NOR bool help @@ -158,8 +220,8 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE - select S3C2410_IOTIMING if S3C2410_CPUFREQ - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK + select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -202,7 +264,6 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" - select MACH_N35 select S3C_DEV_NAND select S3C_DEV_USB_HOST help @@ -226,6 +287,7 @@ config MACH_QT2410 config ARCH_SMDK2410 bool "SMDK2410/A9M2410" select S3C24XX_SMDK + select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2410 or the derived module A9M2410 <http://www.fsforth.de> @@ -240,7 +302,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -261,9 +323,8 @@ if CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C24XX && !CPU_S3C2410 && \ - !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ - !CPU_S3C2443 && CPU_S3C2412 + depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ + !CPU_S3C2442 && !CPU_S3C2443 default y config S3C2412_DMA @@ -273,6 +334,8 @@ config S3C2412_DMA config S3C2412_PM bool + select S3C2412_PM_SLEEP + select SAMSUNG_WAKEMASK help Internal config node to apply S3C2412 power management @@ -291,8 +354,8 @@ config MACH_JIVE Say Y here if you are using the Logitech Jive. config MACH_JIVE_SHOW_BOOTLOADER - bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)" - depends on MACH_JIVE && EXPERIMENTAL + bool "Allow access to bootloader partitions in MTD" + depends on MACH_JIVE config MACH_S3C2413 bool @@ -361,6 +424,18 @@ config MACH_SMDK2416 help Say Y here if you are using an SMDK2416 +config MACH_S3C2416_DT + bool "Samsung S3C2416 machine using devicetree" + select CLKSRC_OF + select USE_OF + select PINCTRL + select PINCTRL_S3C24XX + help + Machine support for Samsung S3C2416 machines with device tree enabled. + Select this if a fdt blob is available for the S3C2416 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + endif # CPU_S3C2416 if CPU_S3C2440 @@ -370,6 +445,32 @@ config S3C2440_DMA help Support for S3C2440 specific DMA code5A +config S3C2440_XTAL_12000000 + bool + help + Indicate that the build needs to support 12MHz system + crystal. + +config S3C2440_XTAL_16934400 + bool + help + Indicate that the build needs to support 16.9344MHz system + crystal. + +config S3C2440_PLL_12000000 + bool + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 + default y if S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. + +config S3C2440_PLL_16934400 + bool + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 + default y if S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. + comment "S3C2440 Boards" # @@ -380,9 +481,8 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM + select S3C2410_COMMON_DCLK select S3C2440_XTAL_12000000 - select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA64 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -398,7 +498,7 @@ config MACH_AT2440EVB config MACH_MINI2440 bool "MINI2440 development board" - select EEPROM_AT24 + select EEPROM_AT24 if I2C select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT @@ -420,10 +520,9 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_COMMON_DCLK + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA128 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST @@ -434,7 +533,7 @@ config MACH_OSIRIS config MACH_OSIRIS_DVS tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" depends on MACH_OSIRIS - select TPS65010 + depends on TPS65010 help Say Y/M here if you want to have dynamic voltage scaling support on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. @@ -480,7 +579,6 @@ comment "S3C2442 Boards" config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" select I2C - select MACH_NEO1973 select MFD_PCF50633 select PCF50633_GPIO select POWER_SUPPLY @@ -493,27 +591,18 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_COMMON_DCLK + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK select S3C24XX_PWM select S3C_DEV_NAND help Say Y here if you're using HP iPAQ rx1950 -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - -endif # CPU_S3C2440 +endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON - bool - help - Common code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. - config S3C2443_DMA bool help diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 0ab6ab15da4..2235d0d3b38 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -18,22 +18,25 @@ obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o +obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o +obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o +obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM @@ -41,7 +44,13 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o +obj-$(CONFIG_S3C24XX_DMA) += dma.o + +obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o + +obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o +obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o + obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o # @@ -67,6 +76,7 @@ obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o +obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c24xx/anubis.h new file mode 100644 index 00000000000..2691665f27d --- /dev/null +++ b/arch/arm/mach-s3c24xx/anubis.h @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks <ben@simtec.co.uk> + * + * ANUBIS - CPLD control constants + * ANUBIS - IRQ Number definitions + * ANUBIS - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_ANUBIS_H +#define __MACH_S3C24XX_ANUBIS_H __FILE__ + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define ANUBIS_CTRL1_NANDSEL (0x3) + +/* IDREG - revision */ + +#define ANUBIS_IDREG_REVMASK (0x7) + +/* irq */ + +#define ANUBIS_IRQ_IDE0 IRQ_EINT2 +#define ANUBIS_IRQ_IDE1 IRQ_EINT3 +#define ANUBIS_IRQ_ASIX IRQ_EINT1 + +/* map */ + +/* start peripherals off after the S3C2410 */ + +#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) + +#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) +#define ANUBIS_PA_CTRL1 ANUBIS_PA_CPLD + +#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) +#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3 << 23)) + +#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) +#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) +#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) +#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) + +#endif /* __MACH_S3C24XX_ANUBIS_H */ diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c index ba02cf8d80a..3f0288f2f54 100644 --- a/arch/arm/mach-s3c24xx/bast-ide.c +++ b/arch/arm/mach-s3c24xx/bast-ide.c @@ -25,8 +25,8 @@ #include <asm/mach/irq.h> #include <mach/map.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> + +#include "bast.h" /* IDE ports */ @@ -34,12 +34,10 @@ static struct pata_platform_info bast_ide_platdata = { .ioport_shift = 5, }; -#define IDE_CS S3C2410_CS5 - static struct resource bast_ide0_resource[] = { - [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20), - [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20), - [2] = DEFINE_RES_IRQ(IRQ_IDE0), + [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20), + [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20), + [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0), }; static struct platform_device bast_device_ide0 = { @@ -55,9 +53,9 @@ static struct platform_device bast_device_ide0 = { }; static struct resource bast_ide1_resource[] = { - [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20), - [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20), - [2] = DEFINE_RES_IRQ(IRQ_IDE1), + [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20), + [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20), + [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1), }; static struct platform_device bast_device_ide1 = { diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index ac7b2ad5c40..cb1b791954d 100644 --- a/arch/arm/mach-s3c24xx/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c @@ -27,27 +27,18 @@ #include <linux/device.h> #include <linux/io.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> #include <asm/irq.h> - +#include <asm/mach-types.h> #include <asm/mach/irq.h> +#include <mach/hardware.h> #include <mach/regs-irq.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> -#include <plat/irq.h> - -#if 0 -#include <asm/debug-ll.h> -#endif +#include "bast.h" #define irqdbf(x...) #define irqdbf2(x...) - /* handle PC104 ISA interrupts from the system CPLD */ /* table of ISA irq nos to the relevant mask... zero means @@ -87,7 +78,7 @@ bast_pc104_mask(struct irq_data *data) static void bast_pc104_maskack(struct irq_data *data) { - struct irq_desc *desc = irq_desc + IRQ_ISA; + struct irq_desc *desc = irq_desc + BAST_IRQ_ISA; bast_pc104_mask(data); desc->irq_data.chip->irq_ack(&desc->irq_data); @@ -122,7 +113,7 @@ bast_irq_pc104_demux(unsigned int irq, if (unlikely(stat == 0)) { /* ack if we get an irq with nothing (ie, startup) */ - desc = irq_desc + IRQ_ISA; + desc = irq_desc + BAST_IRQ_ISA; desc->irq_data.chip->irq_ack(&desc->irq_data); } else { /* handle the IRQ */ @@ -147,7 +138,7 @@ static __init int bast_irq_init(void) __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); - irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux); + irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux); /* register our IRQs */ diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c24xx/bast.h new file mode 100644 index 00000000000..5c7534bae92 --- /dev/null +++ b/arch/arm/mach-s3c24xx/bast.h @@ -0,0 +1,197 @@ +/* + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * BAST - CPLD control constants + * BAST - IRQ Number definitions + * BAST - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_BAST_H +#define __MACH_S3C24XX_BAST_H __FILE__ + +/* CTRL1 - Audio LR routing */ + +#define BAST_CPLD_CTRL1_LRCOFF (0x00) +#define BAST_CPLD_CTRL1_LRCADC (0x01) +#define BAST_CPLD_CTRL1_LRCDAC (0x02) +#define BAST_CPLD_CTRL1_LRCARM (0x03) +#define BAST_CPLD_CTRL1_LRMASK (0x03) + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define BAST_CPLD_CTRL2_WNAND (0x04) +#define BAST_CPLD_CTLR2_IDERST (0x08) + +/* CTRL3 - rom write control, CPLD identity */ + +#define BAST_CPLD_CTRL3_IDMASK (0x0e) +#define BAST_CPLD_CTRL3_ROMWEN (0x01) + +/* CTRL4 - 8bit LCD interface control/status */ + +#define BAST_CPLD_CTRL4_LLAT (0x01) +#define BAST_CPLD_CTRL4_LCDRW (0x02) +#define BAST_CPLD_CTRL4_LCDCMD (0x04) +#define BAST_CPLD_CTRL4_LCDE2 (0x01) + +/* CTRL5 - DMA routing */ + +#define BAST_CPLD_DMA0_PRIIDE (0) +#define BAST_CPLD_DMA0_SECIDE (1) +#define BAST_CPLD_DMA0_ISA15 (2) +#define BAST_CPLD_DMA0_ISA36 (3) + +#define BAST_CPLD_DMA1_PRIIDE (0 << 2) +#define BAST_CPLD_DMA1_SECIDE (1 << 2) +#define BAST_CPLD_DMA1_ISA15 (2 << 2) +#define BAST_CPLD_DMA1_ISA36 (3 << 2) + +/* irq numbers to onboard peripherals */ + +#define BAST_IRQ_USBOC IRQ_EINT18 +#define BAST_IRQ_IDE0 IRQ_EINT16 +#define BAST_IRQ_IDE1 IRQ_EINT17 +#define BAST_IRQ_PCSERIAL1 IRQ_EINT15 +#define BAST_IRQ_PCSERIAL2 IRQ_EINT14 +#define BAST_IRQ_PCPARALLEL IRQ_EINT13 +#define BAST_IRQ_ASIX IRQ_EINT11 +#define BAST_IRQ_DM9000 IRQ_EINT10 +#define BAST_IRQ_ISA IRQ_EINT9 +#define BAST_IRQ_SMALERT IRQ_EINT8 + +/* map */ + +/* + * ok, we've used up to 0x13000000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. We also have the board's CPLD to find register space + * for. + */ + +#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) +#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) +#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) +#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) +#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) +#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) + +#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) +#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) + +#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) +#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) + +#define BAST_PA_LCD_RCMD1 (0x8800000) +#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) + +#define BAST_PA_LCD_WCMD1 (0x8000000) +#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) + +#define BAST_PA_LCD_RDATA1 (0x9800000) +#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) + +#define BAST_PA_LCD_WDATA1 (0x9000000) +#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) + +#define BAST_PA_LCD_RCMD2 (0xA800000) +#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) + +#define BAST_PA_LCD_WCMD2 (0xA000000) +#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) + +#define BAST_PA_LCD_RDATA2 (0xB800000) +#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) + +#define BAST_PA_LCD_WDATA2 (0xB000000) +#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) + + +/* + * 0xE0000000 contains the IO space that is split by speed and + * whether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x00000000 to 0x01000000 16MB ISA IO space + * 0x01000000 to 0x02000000 16MB ISA memory space + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02400000 to 0x02500000 1MB ASIX ethernet controller + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller + * 0x02600000 to 0x02700000 1MB PC SuperIO controller + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define BAST_VA_MULTISPACE (0xE0000000) + +#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) +#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) +#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) +#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) +#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) +#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) +#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) +#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) +#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) + +#define BAST_VAM_CS2 (0x00000000) +#define BAST_VAM_CS3 (0x04000000) +#define BAST_VAM_CS4 (0x08000000) +#define BAST_VAM_CS5 (0x0C000000) + +/* physical offset addresses for the peripherals */ + +#define BAST_PA_ISAIO (0x00000000) +#define BAST_PA_ASIXNET (0x01000000) +#define BAST_PA_SUPERIO (0x01800000) +#define BAST_PA_IDEPRI (0x02000000) +#define BAST_PA_IDEPRIAUX (0x02800000) +#define BAST_PA_IDESEC (0x03000000) +#define BAST_PA_IDESECAUX (0x03800000) +#define BAST_PA_ISAMEM (0x04000000) +#define BAST_PA_DM9000 (0x05000000) + +/* some configurations for the peripherals */ + +#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) + +#define BAST_ASIXNET_CS BAST_VAM_CS5 +#define BAST_DM9000_CS BAST_VAM_CS4 + +#define BAST_IDE_CS S3C2410_CS5 + +#endif /* __MACH_S3C24XX_BAST_H */ diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c deleted file mode 100644 index d10b695a906..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ /dev/null @@ -1,763 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412,S3C2413 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/s3c2412.h> -#include <plat/clock.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -static int s3c2412_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2412_upll_enable(struct clk *clk, int enable) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long orig = upllcon; - - if (!enable) - upllcon |= S3C2412_PLLCON_OFF; - else - upllcon &= ~S3C2412_PLLCON_OFF; - - __raw_writel(upllcon, S3C2410_UPLLCON); - - /* allow ~150uS for the PLL to settle and lock */ - - if (enable && (orig & S3C2412_PLLCON_OFF)) - udelay(150); - - return 0; -} - -/* clock selections */ - -static struct clk clk_erefclk = { - .name = "erefclk", -}; - -static struct clk clk_urefclk = { - .name = "urefclk", -}; - -static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_urefclk) - clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_usysclk = { - .name = "usysclk", - .parent = &clk_xtal, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_usysclk, - }, -}; - -static struct clk clk_mrefclk = { - .name = "mrefclk", - .parent = &clk_xtal, -}; - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_xtal, -}; - -static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - if (div > 2) - div = 2; - - return parent_rate / div; -} - -static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); -} - -static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_usbsrc(clk, rate); - - if ((parent_rate / rate) == 2) - clkdivn |= S3C2412_CLKDIVN_USB48DIV; - else - clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_usbsrc = { - .name = "usbsrc", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, - }, -}; - -static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_mdivclk) - clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_msysclk = { - .name = "msysclk", - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_msysclk, - }, -}; - -static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - unsigned long clkdiv; - unsigned long dvs; - - /* Note, we current equate fclk andf msysclk for S3C2412 */ - - if (parent == &clk_msysclk || parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2412_CLKDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - /* update this under irq lockdown, clkdivn is not protected - * by the clock system. */ - - local_irq_save(flags); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - clkdiv &= ~S3C2412_CLKDIVN_DVSEN; - clkdiv |= dvs; - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - local_irq_restore(flags); - - return 0; -} - -static struct clk clk_armclk = { - .name = "armclk", - .parent = &clk_msysclk, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_armclk, - }, -}; - -/* these next clocks have an divider immediately after them, - * so we can register them with their divider and leave out the - * intermediate clock stage -*/ -static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / div; -} - -static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_UARTDIV_MASK; - div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_uart = { - .name = "uartclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_i2s(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_I2SDIV_MASK; - div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_i2s = { - .name = "i2sclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} -static unsigned long s3c2412_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_CAMDIV_MASK; - div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA0, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA1, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA2, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA3, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2412-uart.0", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2412-uart.1", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2412-uart.2", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_DEV48, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_HOST48, - } -}; - -/* clocks to add where we need to check their parentage */ - -struct clk_init { - struct clk *clk; - unsigned int bit; - struct clk *src_0; - struct clk *src_1; -}; - -static struct clk_init clks_src[] __initdata = { - { - .clk = &clk_usysclk, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_urefclk, - .src_1 = &clk_upll, - }, { - .clk = &clk_i2s, - .bit = S3C2412_CLKSRC_I2SCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_cam, - .bit = S3C2412_CLKSRC_CAMCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, { - .clk = &clk_msysclk, - .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, - .src_0 = &clk_mdivclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_uart, - .bit = S3C2412_CLKSRC_UARTCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_usbsrc, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - /* here we assume OM[4] select xtal */ - }, { - .clk = &clk_erefclk, - .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, { - .clk = &clk_urefclk, - .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, -}; - -/* s3c2412_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static void __init s3c2412_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - struct clk_init *cip = clks_src; - struct clk *src; - int ptr; - int ret; - - for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { - ret = s3c24xx_register_clock(cip->clk); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - cip->clk->name, ret); - } - - src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; - - printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); - clk_set_parent(cip->clk, src); - } -} - -/* clocks to add straight away */ - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_usb_bus, - &clk_mrefclk, - &clk_armclk, -}; - -static struct clk_lookup s3c2412_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), -}; - -int __init s3c2412_baseclk_add(void) -{ - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - unsigned int dvs; - struct clk *clkp; - int ret; - int ptr; - - clk_upll.enable = s3c2412_upll_enable; - clk_usb_bus.parent = &clk_usbsrc; - clk_usb_bus.rate = 0x0; - - clk_f.parent = &clk_msysclk; - - s3c2412_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* set the dvs state according to what we got at boot time */ - - dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; - - if (dvs) - clk_armclk.parent = &clk_h; - - printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); - - /* for the moment, let's use the UPLL, and see if we can - * get 48MHz */ - - clk_set_parent(&clk_usysclk, &clk_upll); - clk_set_parent(&clk_usbsrc, &clk_usysclk); - clk_set_rate(&clk_usbsrc, 48*1000*1000); - } - - printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_upll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2412_clkcon_enable(clkp, 0); - } - - clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); - s3c_pwmclk_init(); - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c deleted file mode 100644 index 14a81c2317a..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ /dev/null @@ -1,174 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/clock.c - * - * Copyright (c) 2010 Simtec Electronics - * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> - * - * S3C2416 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/clk.h> - -#include <plat/s3c2416.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> -#include <plat/pll.h> - -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> -#include <mach/regs-s3c2443-clock.h> - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[8] = { - [0] = 1, - [1] = 2, - [2] = 3, - [3] = 4, - [5] = 6, - [7] = 8, -}; - -static struct clksrc_clk hsspi_eplldiv = { - .clk = { - .name = "hsspi-eplldiv", - .parent = &clk_esysclk.clk, - .ctrlbit = (1 << 14), - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, -}; - -static struct clk *hsspi_sources[] = { - [0] = &hsspi_eplldiv.clk, - [1] = NULL, /* to fix */ -}; - -static struct clksrc_clk hsspi_mux = { - .clk = { - .name = "hsspi-if", - }, - .sources = &(struct clksrc_sources) { - .sources = hsspi_sources, - .nr_sources = ARRAY_SIZE(hsspi_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, -}; - -static struct clksrc_clk hsmmc_div[] = { - [0] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.0", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, - }, - [1] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, - }, -}; - -static struct clksrc_clk hsmmc_mux0 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 6), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[0].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, -}; - -static struct clksrc_clk hsmmc_mux1 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 12), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[1].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, -}; - -static struct clk hsmmc0_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2416_HCLKCON_HSMMC0, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &hsspi_eplldiv, - &hsspi_mux, - &hsmmc_div[0], - &hsmmc_div[1], - &hsmmc_mux0, - &hsmmc_mux1, -}; - -static struct clk_lookup s3c2416_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), -}; - -void __init s3c2416_init_clocks(int xtal) -{ - u32 epllcon = __raw_readl(S3C2443_EPLLCON); - u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); - int ptr; - - /* s3c2416 EPLL compatible with s3c64xx */ - clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); - - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2416_get_pll, - armdiv, ARRAY_SIZE(armdiv), - S3C2416_CLKDIV0_ARMDIV_MASK); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c24xx_register_clock(&hsmmc0_clk); - clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup)); - - s3c_pwmclk_init(); - -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c deleted file mode 100644 index 04b87ec9253..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ /dev/null @@ -1,209 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/serial_core.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/regs-serial.h> - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static unsigned long s3c2440_camif_upll_getrate(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL)) - return parent_rate; - - camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK; - - return parent_rate / (camdivn + 1) / 2; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .ops = &(struct clk_ops) { - .set_rate = s3c2440_camif_upll_setrate, - .get_rate = s3c2440_camif_upll_getrate, - .round_rate = s3c2440_camif_upll_round, - }, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_AC97, -}; - -static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) -{ - unsigned long ucon0, ucon1, ucon2, divisor; - - /* the fun of calculating the uart divisors on the s3c2440 */ - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) - divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; - else if (ucon1 != 0) - divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; - else if (ucon2 != 0) - divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; - else - /* manual calims 44, seems to be 9 */ - divisor = 9; - - return clk_get_rate(clk->parent) / divisor; -} - -static struct clk s3c2440_clk_fclk_n = { - .name = "fclk_n", - .parent = &clk_f, - .ops = &(struct clk_ops) { - .get_rate = s3c2440_fclk_n_getrate, - }, -}; - -static struct clk_lookup s3c2440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), - CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), -}; - -static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - s3c24xx_register_clock(&s3c2440_clk_fclk_n); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c deleted file mode 100644 index bdaba59b42d..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ /dev/null @@ -1,215 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/cpu-freq.h> - -#include <plat/s3c2443.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -/* clock selections */ - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, -}; - -/* hsspi - * - * high-speed spi clock, sourced from esysclk -*/ - -static struct clksrc_clk clk_hsspi = { - .clk = { - .name = "hsspi-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - - -/* clk_hsmcc_div - * - * this clock is sourced from epll, and is fed through a divider, - * to a mux controlled by sclkcon where either it or a extclk can - * be fed to the hsmmc block -*/ - -static struct clksrc_clk clk_hsmmc_div = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, -}; - -static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); - - clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | - S3C2443_SCLKCON_HSMMCCLK_EPLL); - - if (parent == &clk_epll) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; - else if (parent == &clk_ext) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; - else - return -EINVAL; - - if (clk->usage > 0) { - __raw_writel(clksrc, S3C2443_SCLKCON); - } - - clk->parent = parent; - return 0; -} - -static int s3c2443_enable_hsmmc(struct clk *clk, int enable) -{ - return s3c2443_setparent_hsmmc(clk, clk->parent); -} - -static struct clk clk_hsmmc = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .parent = &clk_hsmmc_div.clk, - .enable = s3c2443_enable_hsmmc, - .ops = &(struct clk_ops) { - .set_parent = s3c2443_setparent_hsmmc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "spi", - .devname = "s3c2410-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI1, - } -}; - -/* clocks to add straight away */ - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_hsspi, - &clk_hsmmc_div, -}; - -static struct clk *clks[] __initdata = { - &clk_hsmmc, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), -}; - -void __init s3c2443_init_clocks(int xtal) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ptr; - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, - armdiv, ARRAY_SIZE(armdiv), - S3C2443_CLKDIV0_ARMDIV_MASK); - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c deleted file mode 100644 index 6d9b688c442..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c244x.c +++ /dev/null @@ -1,141 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .ops = &(struct clk_ops) { - .set_parent = s3c2440_setparent_armclk, - }, -}; - -static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c2440_clk_init); - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c deleted file mode 100644 index aeb4a24ff3e..00000000000 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Common code for SoCs starting with the S3C2443 - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> - - -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -}; - -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - -/* hclk divider - * - * divides the prediv and provides the hclk. - */ - -static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_h_ops = { - .get_rate = s3c2443_hclkdiv_getrate, -}; - -/* pclk divider - * - * divides the hclk and provides the pclk. - */ - -static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_p_ops = { - .get_rate = s3c2443_pclkdiv_getrate, -}; - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. -*/ - -static unsigned int *armdiv; -static int nr_armdiv; -static int armdivmask; - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - if (!nr_armdiv) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) - best = div; - } - } - - return parent / best; -} - -static unsigned long s3c2443_armclk_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkcon0; - int val; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= armdivmask; - val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; - - return rate / armdiv[val]; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~armdivmask; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .get_rate = s3c2443_armclk_getrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - -/* common clksrc clocks */ - -static struct clksrc_clk clksrc_clks[] = { - { - /* camera interface bus-clock, divided down from esysclk */ - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, - }, { - .clk = { - .name = "display-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, - }, -}; - -static struct clksrc_clk clk_esys_uart = { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -static struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "cfc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "uart", - .devname = "s3c2440-uart.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2440-uart.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2440-uart.2", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .devname = "s3c2440-uart.3", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - }, { - .name = "nand", - .parent = &clk_h, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus_host.clk, - } -}; - -static struct clk hsmmc1_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, -}; - -static struct clk hsspi_clk = { - .name = "spi", - .devname = "s3c2443-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_HSSPI, -}; - -/* EPLLCON compatible enough to get on/off information */ - -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - int ptr; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - clk_mpll.rate = pll; - - printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), - print_mhz(clk_get_rate(&clk_h)), - print_mhz(clk_get_rate(&clk_p))); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(&clksrc_clks[ptr], true); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); -} - -static struct clk *clks[] __initdata = { - &clk_prediv, - &clk_mpllref, - &clk_mdivclk, - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_armdiv, - &hsmmc1_clk, - &hsspi_clk, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_i2s_eplldiv, - &clk_i2s, - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, - &clk_arm, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), -}; - -void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask) -{ - int ptr; - - armdiv = divs; - nr_armdiv = nr_divs; - armdivmask = divmask; - - /* s3c2443 parents h clock from prediv */ - clk_h.parent = &clk_prediv; - clk_h.ops = &clk_h_ops; - - /* and p clock from h clock */ - clk_p.parent = &clk_h; - clk_p.ops = &clk_p_ops; - - clk_usb_bus.parent = &clk_usb_bus_host.clk; - clk_epll.parent = &clk_epllref.clk; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - /* See s3c2443/etc notes on disabling clocks at init time */ - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c2443_common_setup_clocks(get_mpll); -} diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 3b2cf6db363..e9fbcc91c5c 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -37,15 +37,16 @@ #include <asm/irq.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> #include <linux/platform_data/leds-s3c24xx.h> - #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/pm.h> +#include "common-smdk.h" + /* LED devices */ static struct s3c24xx_led_platdata smdk_pdata_led4 = { diff --git a/arch/arm/mach-s3c24xx/common-smdk.h b/arch/arm/mach-s3c24xx/common-smdk.h new file mode 100644 index 00000000000..98f733e1cb4 --- /dev/null +++ b/arch/arm/mach-s3c24xx/common-smdk.h @@ -0,0 +1,14 @@ +/* + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Common code for SMDK2410 and SMDK2440 boards + * + * http://www.fluff.org/ben/smdk2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void smdk_machine_init(void); diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 0c9e9a785ef..c0763b83774 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -27,9 +27,12 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/platform_data/dma-s3c24xx.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -42,18 +45,17 @@ #include <asm/mach/map.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> +#include <mach/dma.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> -#include <plat/s3c2416.h> -#include <plat/s3c244x.h> -#include <plat/s3c2443.h> #include <plat/cpu-freq.h> #include <plat/pll.h> +#include <plat/pwm-core.h> +#include <plat/watchdog-reset.h> + +#include "common.h" /* table of supported CPUs */ @@ -72,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410000, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410_init, .name = name_s3c2410 @@ -81,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410002, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410a_init, .name = name_s3c2410a @@ -90,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440000, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440 @@ -99,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440001, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440a @@ -108,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aaa, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442 @@ -117,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aab, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442b @@ -126,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -135,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412003, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -144,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32450003, .idmask = 0xffffffff, .map_io = s3c2416_map_io, - .init_clocks = s3c2416_init_clocks, .init_uarts = s3c2416_init_uarts, .init = s3c2416_init, .name = name_s3c2416, @@ -153,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32443001, .idmask = 0xffffffff, .map_io = s3c2443_map_io, - .init_clocks = s3c2443_init_clocks, .init_uarts = s3c2443_init_uarts, .init = s3c2443_init, .name = name_s3c2443, @@ -197,7 +189,7 @@ static unsigned long s3c24xx_read_idcode_v4(void) static void s3c24xx_default_idle(void) { - unsigned long tmp; + unsigned long tmp = 0; int i; /* idle the system by using the idle mode which will wait for an @@ -219,6 +211,13 @@ static void s3c24xx_default_idle(void) S3C2410_CLKCON); } +static struct samsung_pwm_variant s3c24xx_pwm_variant = { + .bits = 16, + .div_base = 1, + .has_tint_cstat = false, + .tclk_mask = (1 << 4), +}; + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { arm_pm_idle = s3c24xx_default_idle; @@ -232,13 +231,35 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) } else { samsung_cpu_id = s3c24xx_read_idcode_v4(); } - s3c24xx_init_cpu(); s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); + + samsung_pwm_set_platdata(&s3c24xx_pwm_variant); +} + +void __init samsung_set_timer_source(unsigned int event, unsigned int source) +{ + s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); +} + +void __init samsung_timer_init(void) +{ + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4, + }; + + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &s3c24xx_pwm_variant); } /* Serial port registrations */ +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + static struct resource s3c2410_uart0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K), [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \ @@ -286,17 +307,265 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* initialise all the clocks */ +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_DMA3), +}; +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442) +static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; + +static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2410_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2410_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2410_dma_platdata, + }, +}; +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, +}; + +static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2412_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2412_device_dma = { + .name = "s3c2412-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2412_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPU_S3C2440) +static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(6, 1) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) | + S3C24XX_DMA_CHANREQ(0, 2), + }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) | + S3C24XX_DMA_CHANREQ(5, 2), + }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) | + S3C24XX_DMA_CHANREQ(6, 3), + }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) | + S3C24XX_DMA_CHANREQ(5, 3), + }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; -void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, - unsigned long hclk, - unsigned long pclk) +static struct s3c24xx_dma_platdata s3c2440_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2440_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2440_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2440_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) +static struct resource s3c2443_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3), + [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4), + [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5), +}; + +static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, +}; + +static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { + .num_phy_channels = 6, + .channels = s3c2443_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2443_device_dma = { + .name = "s3c2443-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2443_dma_resource), + .resource = s3c2443_dma_resource, + .dev = { + .platform_data = &s3c2443_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410) +void __init s3c2410_init_clocks(int xtal) { - clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), - clk_xtal.rate); + s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; +#ifdef CONFIG_CPU_S3C2412 +void __init s3c2412_init_clocks(int xtal) +{ + s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); } +#endif + +#ifdef CONFIG_CPU_S3C2416 +void __init s3c2416_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440) +void __init s3c2440_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442) +void __init s3c2442_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +void __init s3c2443_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dclk_resource[] = { + [0] = DEFINE_RES_MEM(0x56000084, 0x4), +}; + +struct platform_device s3c2410_device_dclk = { + .name = "s3c2410-dclk", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dclk_resource), + .resource = s3c2410_dclk_resource, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index c2f596e7bc2..ac3ff12a060 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -12,7 +12,123 @@ #ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H #define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ -void s3c2410_restart(char mode, const char *cmd); -void s3c244x_restart(char mode, const char *cmd); +#include <linux/reboot.h> + +struct s3c2410_uartcfg; + +#ifdef CONFIG_CPU_S3C2410 +extern int s3c2410_init(void); +extern int s3c2410a_init(void); +extern void s3c2410_map_io(void); +extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2410_init_clocks(int xtal); +extern void s3c2410_restart(enum reboot_mode mode, const char *cmd); +extern void s3c2410_init_irq(void); +#else +#define s3c2410_init_clocks NULL +#define s3c2410_init_uarts NULL +#define s3c2410_map_io NULL +#define s3c2410_init NULL +#define s3c2410a_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2412 +extern int s3c2412_init(void); +extern void s3c2412_map_io(void); +extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2412_init_clocks(int xtal); +extern int s3c2412_baseclk_add(void); +extern void s3c2412_restart(enum reboot_mode mode, const char *cmd); +extern void s3c2412_init_irq(void); +#else +#define s3c2412_init_clocks NULL +#define s3c2412_init_uarts NULL +#define s3c2412_map_io NULL +#define s3c2412_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2416 +extern int s3c2416_init(void); +extern void s3c2416_map_io(void); +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2416_init_clocks(int xtal); +extern int s3c2416_baseclk_add(void); +extern void s3c2416_restart(enum reboot_mode mode, const char *cmd); +extern void s3c2416_init_irq(void); + +extern struct syscore_ops s3c2416_irq_syscore_ops; +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +extern void s3c244x_map_io(void); +extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c244x_restart(enum reboot_mode mode, const char *cmd); +#else +#define s3c244x_init_uarts NULL +#endif + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +extern void s3c2440_map_io(void); +extern void s3c2440_init_clocks(int xtal); +extern void s3c2440_init_irq(void); +#else +#define s3c2440_init NULL +#define s3c2440_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +extern void s3c2442_map_io(void); +extern void s3c2442_init_clocks(int xtal); +extern void s3c2442_init_irq(void); +#else +#define s3c2442_init NULL +#define s3c2442_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2443 +extern int s3c2443_init(void); +extern void s3c2443_map_io(void); +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2443_init_clocks(int xtal); +extern int s3c2443_baseclk_add(void); +extern void s3c2443_restart(enum reboot_mode mode, const char *cmd); +extern void s3c2443_init_irq(void); +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif + +extern struct syscore_ops s3c24xx_irq_syscore_ops; + +extern struct platform_device s3c2410_device_dma; +extern struct platform_device s3c2412_device_dma; +extern struct platform_device s3c2440_device_dma; +extern struct platform_device s3c2443_device_dma; + +extern struct platform_device s3c2410_device_dclk; + +#ifdef CONFIG_S3C2410_COMMON_CLK +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2412_COMMON_CLK +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2443_COMMON_CLK +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c new file mode 100644 index 00000000000..d4d9514335f --- /dev/null +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/cpufreq.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/cpu-freq-core.h> + +#include "regs-mem.h" + +/** + * s3c2410_cpufreq_setrefresh - set SDRAM refresh value + * @cfg: The frequency configuration + * + * Set the SDRAM refresh value appropriately for the configured + * frequency. + */ +void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + struct s3c_cpufreq_board *board = cfg->board; + unsigned long refresh; + unsigned long refval; + + /* Reduce both the refresh time (in ns) and the frequency (in MHz) + * down to ensure that we do not overflow 32 bit numbers. + * + * This should work for HCLK up to 133MHz and refresh period up + * to 30usec. + */ + + refresh = (cfg->freq.hclk / 100) * (board->refresh / 10); + refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */ + refresh = (1 << 11) + 1 - refresh; + + s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh); + + refval = __raw_readl(S3C2410_REFRESH); + refval &= ~((1 << 12) - 1); + refval |= refresh; + __raw_writel(refval, S3C2410_REFRESH); +} + +/** + * s3c2410_set_fvco - set the PLL value + * @cfg: The frequency configuration + */ +void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) +{ + if (!IS_ERR(cfg->mpll)) + clk_set_rate(cfg->mpll, cfg->pll.frequency); +} diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 4803338cf56..09aa12da178 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,14 +24,9 @@ #include <plat/cpu.h> #include <plat/dma-s3c24xx.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index 38472ac920f..0c0106d1a4d 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,14 +24,9 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } @@ -39,121 +35,95 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { [DMACH_XD0] = { .name = "xdreq0", .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), - .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0), }, [DMACH_XD1] = { .name = "xdreq1", .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), - .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1), }, [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), - .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), }, - [DMACH_SPI0] = { - .name = "spi0", + [DMACH_SPI0_RX] = { + .name = "spi0-rx", + .channels = MAP(S3C2412_DMAREQSEL_SPI0RX), + }, + [DMACH_SPI0_TX] = { + .name = "spi0-tx", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), - .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), }, - [DMACH_SPI1] = { - .name = "spi1", + [DMACH_SPI1_RX] = { + .name = "spi1-rx", + .channels = MAP(S3C2412_DMAREQSEL_SPI1RX), + }, + [DMACH_SPI1_TX] = { + .name = "spi1-tx", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), - .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), }, [DMACH_TIMER] = { .name = "timer", .channels = MAP(S3C2412_DMAREQSEL_TIMER), - .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER), }, [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2412_DMAREQSEL_I2SRX), - .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX), }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2412_DMAREQSEL_I2STX), - .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX), }, [DMACH_USB_EP1] = { .name = "usb-ep1", .channels = MAP(S3C2412_DMAREQSEL_USBEP1), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1), }, [DMACH_USB_EP2] = { .name = "usb-ep2", .channels = MAP(S3C2412_DMAREQSEL_USBEP2), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2), }, [DMACH_USB_EP3] = { .name = "usb-ep3", .channels = MAP(S3C2412_DMAREQSEL_USBEP3), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3), }, [DMACH_USB_EP4] = { .name = "usb-ep4", .channels = MAP(S3C2412_DMAREQSEL_USBEP4), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4), }, }; -static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map, - enum dma_data_direction dir) -{ - unsigned long chsel; - - if (dir == DMA_FROM_DEVICE) - chsel = map->channels_rx[0]; - else - chsel = map->channels[0]; - - chsel &= ~DMA_CH_VALID; - chsel |= S3C2412_DMAREQSEL_HW; - - writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL); -} - static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - s3c2412_dma_direction(chan, map, chan->source); + unsigned long chsel = map->channels[0] & (~DMA_CH_VALID); + writel(chsel | S3C2412_DMAREQSEL_HW, + chan->regs + S3C2412_DMA_DMAREQSEL); } static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .select = s3c2412_dma_select, - .direction = s3c2412_dma_direction, .dcon_mask = 0, .map = s3c2412_dma_mappings, .map_size = ARRAY_SIZE(s3c2412_dma_mappings), diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 5f0a0c8ef84..2f8e8a3017d 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,14 +24,9 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 2d94228d286..f4096ec0700 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,14 +24,9 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { \ @@ -132,7 +128,8 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { static void s3c2443_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - writel(map->channels[0] | S3C2443_DMAREQSEL_HW, + unsigned long chsel = map->channels[0] & (~DMA_CH_VALID); + writel(chsel | S3C2443_DMAREQSEL_HW, chan->regs + S3C2443_DMA_DMAREQSEL); } diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c new file mode 100644 index 00000000000..a8dafc174fe --- /dev/null +++ b/arch/arm/mach-s3c24xx/dma.c @@ -0,0 +1,1465 @@ +/* + * Copyright 2003-2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 DMA core + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + +#ifdef CONFIG_S3C2410_DMA_DEBUG +#define DEBUG +#endif + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/syscore_ops.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <mach/hardware.h> +#include <mach/dma.h> +#include <mach/map.h> + +#include <plat/dma-s3c24xx.h> +#include <plat/regs-dma.h> + +/* io map for dma */ +static void __iomem *dma_base; +static struct kmem_cache *dma_kmem; + +static int dma_channels; + +static struct s3c24xx_dma_selection dma_sel; + + +/* debugging functions */ + +#define BUF_MAGIC (0xcafebabe) + +#define dmawarn(fmt...) printk(KERN_DEBUG fmt) + +#define dma_regaddr(chan, reg) ((chan)->regs + (reg)) + +#if 1 +#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) +#else +static inline void +dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) +{ + pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); + writel(val, dma_regaddr(chan, reg)); +} +#endif + +#define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) + +/* captured register state for debug */ + +struct s3c2410_dma_regstate { + unsigned long dcsrc; + unsigned long disrc; + unsigned long dstat; + unsigned long dcon; + unsigned long dmsktrig; +}; + +#ifdef CONFIG_S3C2410_DMA_DEBUG + +/* dmadbg_showregs + * + * simple debug routine to print the current state of the dma registers +*/ + +static void +dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) +{ + regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC); + regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC); + regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT); + regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON); + regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); +} + +static void +dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan, + struct s3c2410_dma_regstate *regs) +{ + printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", + chan->number, fname, line, + regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig, + regs->dcon); +} + +static void +dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan) +{ + struct s3c2410_dma_regstate state; + + dmadbg_capture(chan, &state); + + printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n", + chan->number, fname, line, chan->load_state, + chan->curr, chan->next, chan->end); + + dmadbg_dumpregs(fname, line, chan, &state); +} + +static void +dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) +{ + struct s3c2410_dma_regstate state; + + dmadbg_capture(chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); +} + +#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan)) +#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan)) +#else +#define dbg_showregs(chan) do { } while(0) +#define dbg_showchan(chan) do { } while(0) +#endif /* CONFIG_S3C2410_DMA_DEBUG */ + +/* s3c2410_dma_stats_timeout + * + * Update DMA stats from timeout info +*/ + +static void +s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val) +{ + if (stats == NULL) + return; + + if (val > stats->timeout_longest) + stats->timeout_longest = val; + if (val < stats->timeout_shortest) + stats->timeout_shortest = val; + + stats->timeout_avg += val; +} + +/* s3c2410_dma_waitforload + * + * wait for the DMA engine to load a buffer, and update the state accordingly +*/ + +static int +s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) +{ + int timeout = chan->load_timeout; + int took; + + if (chan->load_state != S3C2410_DMALOAD_1LOADED) { + printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line); + return 0; + } + + if (chan->stats != NULL) + chan->stats->loads++; + + while (--timeout > 0) { + if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) { + took = chan->load_timeout - timeout; + + s3c2410_dma_stats_timeout(chan->stats, took); + + switch (chan->load_state) { + case S3C2410_DMALOAD_1LOADED: + chan->load_state = S3C2410_DMALOAD_1RUNNING; + break; + + default: + printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state); + } + + return 1; + } + } + + if (chan->stats != NULL) { + chan->stats->timeout_failed++; + } + + return 0; +} + +/* s3c2410_dma_loadbuffer + * + * load a buffer, and update the channel state +*/ + +static inline int +s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, + struct s3c2410_dma_buf *buf) +{ + unsigned long reload; + + if (buf == NULL) { + dmawarn("buffer is NULL\n"); + return -EINVAL; + } + + pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", + buf, (unsigned long)buf->data, buf->size); + + /* check the state of the channel before we do anything */ + + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n"); + } + + if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) { + dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n"); + } + + /* it would seem sensible if we are the last buffer to not bother + * with the auto-reload bit, so that the DMA engine will not try + * and load another transfer after this one has finished... + */ + if (chan->load_state == S3C2410_DMALOAD_NONE) { + pr_debug("load_state is none, checking for noreload (next=%p)\n", + buf->next); + reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; + } else { + //pr_debug("load_state is %d => autoreload\n", chan->load_state); + reload = S3C2410_DCON_AUTORELOAD; + } + + if ((buf->data & 0xf0000000) != 0x30000000) { + dmawarn("dmaload: buffer is %p\n", (void *)buf->data); + } + + writel(buf->data, chan->addr_reg); + + dma_wrreg(chan, S3C2410_DMA_DCON, + chan->dcon | reload | (buf->size/chan->xfer_unit)); + + chan->next = buf->next; + + /* update the state of the channel */ + + switch (chan->load_state) { + case S3C2410_DMALOAD_NONE: + chan->load_state = S3C2410_DMALOAD_1LOADED; + break; + + case S3C2410_DMALOAD_1RUNNING: + chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING; + break; + + default: + dmawarn("dmaload: unknown state %d in loadbuffer\n", + chan->load_state); + break; + } + + return 0; +} + +/* s3c2410_dma_call_op + * + * small routine to call the op routine with the given op if it has been + * registered +*/ + +static void +s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op) +{ + if (chan->op_fn != NULL) { + (chan->op_fn)(chan, op); + } +} + +/* s3c2410_dma_buffdone + * + * small wrapper to check if callback routine needs to be called, and + * if so, call it +*/ + +static inline void +s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, + enum s3c2410_dma_buffresult result) +{ +#if 0 + pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", + chan->callback_fn, buf, buf->id, buf->size, result); +#endif + + if (chan->callback_fn != NULL) { + (chan->callback_fn)(chan, buf->id, buf->size, result); + } +} + +/* s3c2410_dma_start + * + * start a dma channel going +*/ + +static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) +{ + unsigned long tmp; + unsigned long flags; + + pr_debug("s3c2410_start_dma: channel=%d\n", chan->number); + + local_irq_save(flags); + + if (chan->state == S3C2410_DMA_RUNNING) { + pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state); + local_irq_restore(flags); + return 0; + } + + chan->state = S3C2410_DMA_RUNNING; + + /* check whether there is anything to load, and if not, see + * if we can find anything to load + */ + + if (chan->load_state == S3C2410_DMALOAD_NONE) { + if (chan->next == NULL) { + printk(KERN_ERR "dma%d: channel has nothing loaded\n", + chan->number); + chan->state = S3C2410_DMA_IDLE; + local_irq_restore(flags); + return -EINVAL; + } + + s3c2410_dma_loadbuffer(chan, chan->next); + } + + dbg_showchan(chan); + + /* enable the channel */ + + if (!chan->irq_enabled) { + enable_irq(chan->irq); + chan->irq_enabled = 1; + } + + /* start the channel going */ + + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + tmp &= ~S3C2410_DMASKTRIG_STOP; + tmp |= S3C2410_DMASKTRIG_ON; + dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); + + pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); + +#if 0 + /* the dma buffer loads should take care of clearing the AUTO + * reloading feature */ + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp &= ~S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); +#endif + + s3c2410_dma_call_op(chan, S3C2410_DMAOP_START); + + dbg_showchan(chan); + + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __func__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + + local_irq_restore(flags); + + return 0; +} + +/* s3c2410_dma_canload + * + * work out if we can queue another buffer into the DMA engine +*/ + +static int +s3c2410_dma_canload(struct s3c2410_dma_chan *chan) +{ + if (chan->load_state == S3C2410_DMALOAD_NONE || + chan->load_state == S3C2410_DMALOAD_1RUNNING) + return 1; + + return 0; +} + +/* s3c2410_dma_enqueue + * + * queue an given buffer for dma transfer. + * + * id the device driver's id information for this buffer + * data the physical address of the buffer data + * size the size of the buffer in bytes + * + * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART + * is checked, and if set, the channel is started. If this flag isn't set, + * then an error will be returned. + * + * It is possible to queue more than one DMA buffer onto a channel at + * once, and the code will deal with the re-loading of the next buffer + * when necessary. +*/ + +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, + dma_addr_t data, int size) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + struct s3c2410_dma_buf *buf; + unsigned long flags; + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: id=%p, data=%08x, size=%d\n", + __func__, id, (unsigned int)data, size); + + buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); + if (buf == NULL) { + pr_debug("%s: out of memory (%ld alloc)\n", + __func__, (long)sizeof(*buf)); + return -ENOMEM; + } + + //pr_debug("%s: new buffer %p\n", __func__, buf); + //dbg_showchan(chan); + + buf->next = NULL; + buf->data = buf->ptr = data; + buf->size = size; + buf->id = id; + buf->magic = BUF_MAGIC; + + local_irq_save(flags); + + if (chan->curr == NULL) { + /* we've got nothing loaded... */ + pr_debug("%s: buffer %p queued onto empty channel\n", + __func__, buf); + + chan->curr = buf; + chan->end = buf; + chan->next = NULL; + } else { + pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", + chan->number, __func__, buf); + + if (chan->end == NULL) { + pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", + chan->number, __func__, chan); + } else { + chan->end->next = buf; + chan->end = buf; + } + } + + /* if necessary, update the next buffer field */ + if (chan->next == NULL) + chan->next = buf; + + /* check to see if we can load a buffer */ + if (chan->state == S3C2410_DMA_RUNNING) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) { + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + printk(KERN_ERR "dma%d: loadbuffer:" + "timeout loading buffer\n", + chan->number); + dbg_showchan(chan); + local_irq_restore(flags); + return -EINVAL; + } + } + + while (s3c2410_dma_canload(chan) && chan->next != NULL) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } else if (chan->state == S3C2410_DMA_IDLE) { + if (chan->flags & S3C2410_DMAF_AUTOSTART) { + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_START); + } + } + + local_irq_restore(flags); + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_enqueue); + +static inline void +s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) +{ + int magicok = (buf->magic == BUF_MAGIC); + + buf->magic = -1; + + if (magicok) { + kmem_cache_free(dma_kmem, buf); + } else { + printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf); + } +} + +/* s3c2410_dma_lastxfer + * + * called when the system is out of buffers, to ensure that the channel + * is prepared for shutdown. +*/ + +static inline void +s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) +{ +#if 0 + pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", + chan->number, chan->load_state); +#endif + + switch (chan->load_state) { + case S3C2410_DMALOAD_NONE: + break; + + case S3C2410_DMALOAD_1LOADED: + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + /* flag error? */ + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __func__); + return; + } + break; + + case S3C2410_DMALOAD_1LOADED_1RUNNING: + /* I believe in this case we do not have anything to do + * until the next buffer comes along, and we turn off the + * reload */ + return; + + default: + pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", + chan->number, chan->load_state); + return; + + } + + /* hopefully this'll shut the damned thing up after the transfer... */ + dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD); +} + + +#define dmadbg2(x...) + +static irqreturn_t +s3c2410_dma_irq(int irq, void *devpw) +{ + struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw; + struct s3c2410_dma_buf *buf; + + buf = chan->curr; + + dbg_showchan(chan); + + /* modify the channel state */ + + switch (chan->load_state) { + case S3C2410_DMALOAD_1RUNNING: + /* TODO - if we are running only one buffer, we probably + * want to reload here, and then worry about the buffer + * callback */ + + chan->load_state = S3C2410_DMALOAD_NONE; + break; + + case S3C2410_DMALOAD_1LOADED: + /* iirc, we should go back to NONE loaded here, we + * had a buffer, and it was never verified as being + * loaded. + */ + + chan->load_state = S3C2410_DMALOAD_NONE; + break; + + case S3C2410_DMALOAD_1LOADED_1RUNNING: + /* we'll worry about checking to see if another buffer is + * ready after we've called back the owner. This should + * ensure we do not wait around too long for the DMA + * engine to start the next transfer + */ + + chan->load_state = S3C2410_DMALOAD_1LOADED; + break; + + case S3C2410_DMALOAD_NONE: + printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", + chan->number); + break; + + default: + printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", + chan->number, chan->load_state); + break; + } + + if (buf != NULL) { + /* update the chain to make sure that if we load any more + * buffers when we call the callback function, things should + * work properly */ + + chan->curr = buf->next; + buf->next = NULL; + + if (buf->magic != BUF_MAGIC) { + printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", + chan->number, __func__, buf); + return IRQ_HANDLED; + } + + s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK); + + /* free resouces */ + s3c2410_dma_freebuf(buf); + } else { + } + + /* only reload if the channel is still running... our buffer done + * routine may have altered the state by requesting the dma channel + * to stop or shutdown... */ + + /* todo: check that when the channel is shut-down from inside this + * function, we cope with unsetting reload, etc */ + + if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { + unsigned long flags; + + switch (chan->load_state) { + case S3C2410_DMALOAD_1RUNNING: + /* don't need to do anything for this state */ + break; + + case S3C2410_DMALOAD_NONE: + /* can load buffer immediately */ + break; + + case S3C2410_DMALOAD_1LOADED: + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + /* flag error? */ + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __func__); + return IRQ_HANDLED; + } + + break; + + case S3C2410_DMALOAD_1LOADED_1RUNNING: + goto no_load; + + default: + printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n", + chan->number, chan->load_state); + return IRQ_HANDLED; + } + + local_irq_save(flags); + s3c2410_dma_loadbuffer(chan, chan->next); + local_irq_restore(flags); + } else { + s3c2410_dma_lastxfer(chan); + + /* see if we can stop this channel.. */ + if (chan->load_state == S3C2410_DMALOAD_NONE) { + pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", + chan->number, jiffies); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_STOP); + } + } + + no_load: + return IRQ_HANDLED; +} + +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); + +/* s3c2410_request_dma + * + * get control of an dma channel +*/ + +int s3c2410_dma_request(enum dma_ch channel, + struct s3c2410_dma_client *client, + void *dev) +{ + struct s3c2410_dma_chan *chan; + unsigned long flags; + int err; + + pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", + channel, client->name, dev); + + local_irq_save(flags); + + chan = s3c2410_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; + } + + dbg_showchan(chan); + + chan->client = client; + chan->in_use = 1; + + if (!chan->irq_claimed) { + pr_debug("dma%d: %s : requesting irq %d\n", + channel, __func__, chan->irq); + + chan->irq_claimed = 1; + local_irq_restore(flags); + + err = request_irq(chan->irq, s3c2410_dma_irq, 0, + client->name, (void *)chan); + + local_irq_save(flags); + + if (err) { + chan->in_use = 0; + chan->irq_claimed = 0; + local_irq_restore(flags); + + printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", + client->name, chan->irq, chan->number); + return err; + } + + chan->irq_enabled = 1; + } + + local_irq_restore(flags); + + /* need to setup */ + + pr_debug("%s: channel initialised, %p\n", __func__, chan); + + return chan->number | DMACH_LOW_LEVEL; +} + +EXPORT_SYMBOL(s3c2410_dma_request); + +/* s3c2410_dma_free + * + * release the given channel back to the system, will stop and flush + * any outstanding transfers, and ensure the channel is ready for the + * next claimant. + * + * Note, although a warning is currently printed if the freeing client + * info is not the same as the registrant's client info, the free is still + * allowed to go through. +*/ + +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned long flags; + + if (chan == NULL) + return -EINVAL; + + local_irq_save(flags); + + if (chan->client != client) { + printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", + channel, chan->client, client); + } + + /* sort out stopping and freeing the channel */ + + if (chan->state != S3C2410_DMA_IDLE) { + pr_debug("%s: need to stop dma channel %p\n", + __func__, chan); + + /* possibly flush the channel */ + s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); + } + + chan->client = NULL; + chan->in_use = 0; + + if (chan->irq_claimed) + free_irq(chan->irq, (void *)chan); + + chan->irq_claimed = 0; + + if (!(channel & DMACH_LOW_LEVEL)) + s3c_dma_chan_map[channel] = NULL; + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_free); + +static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) +{ + unsigned long flags; + unsigned long tmp; + + pr_debug("%s:\n", __func__); + + dbg_showchan(chan); + + local_irq_save(flags); + + s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP); + + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + tmp |= S3C2410_DMASKTRIG_STOP; + //tmp &= ~S3C2410_DMASKTRIG_ON; + dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); + +#if 0 + /* should also clear interrupts, according to WinCE BSP */ + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp |= S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); +#endif + + /* should stop do this, or should we wait for flush? */ + chan->state = S3C2410_DMA_IDLE; + chan->load_state = S3C2410_DMALOAD_NONE; + + local_irq_restore(flags); + + return 0; +} + +static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan) +{ + unsigned long tmp; + unsigned int timeout = 0x10000; + + while (timeout-- > 0) { + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + + if (!(tmp & S3C2410_DMASKTRIG_ON)) + return; + } + + pr_debug("dma%d: failed to stop?\n", chan->number); +} + + +/* s3c2410_dma_flush + * + * stop the channel, and remove all current and pending transfers +*/ + +static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) +{ + struct s3c2410_dma_buf *buf, *next; + unsigned long flags; + + pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number); + + dbg_showchan(chan); + + local_irq_save(flags); + + if (chan->state != S3C2410_DMA_IDLE) { + pr_debug("%s: stopping channel...\n", __func__ ); + s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); + } + + buf = chan->curr; + if (buf == NULL) + buf = chan->next; + + chan->curr = chan->next = chan->end = NULL; + + if (buf != NULL) { + for ( ; buf != NULL; buf = next) { + next = buf->next; + + pr_debug("%s: free buffer %p, next %p\n", + __func__, buf, buf->next); + + s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); + s3c2410_dma_freebuf(buf); + } + } + + dbg_showregs(chan); + + s3c2410_dma_waitforstop(chan); + +#if 0 + /* should also clear interrupts, according to WinCE BSP */ + { + unsigned long tmp; + + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp |= S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); + } +#endif + + dbg_showregs(chan); + + local_irq_restore(flags); + + return 0; +} + +static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) +{ + unsigned long flags; + + local_irq_save(flags); + + dbg_showchan(chan); + + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __func__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + + local_irq_restore(flags); + + return 0; + +} + +int +s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + switch (op) { + case S3C2410_DMAOP_START: + return s3c2410_dma_start(chan); + + case S3C2410_DMAOP_STOP: + return s3c2410_dma_dostop(chan); + + case S3C2410_DMAOP_PAUSE: + case S3C2410_DMAOP_RESUME: + return -ENOENT; + + case S3C2410_DMAOP_FLUSH: + return s3c2410_dma_flush(chan); + + case S3C2410_DMAOP_STARTED: + return s3c2410_dma_started(chan); + + case S3C2410_DMAOP_TIMEOUT: + return 0; + + } + + return -ENOENT; /* unknown, don't bother */ +} + +EXPORT_SYMBOL(s3c2410_dma_ctrl); + +/* DMA configuration for each channel + * + * DISRCC -> source of the DMA (AHB,APB) + * DISRC -> source address of the DMA + * DIDSTC -> destination of the DMA (AHB,APD) + * DIDST -> destination address of the DMA +*/ + +/* s3c2410_dma_config + * + * xfersize: size of unit in bytes (1,2,4) +*/ + +int s3c2410_dma_config(enum dma_ch channel, + int xferunit) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned int dcon; + + pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); + + if (chan == NULL) + return -EINVAL; + + dcon = chan->dcon & dma_sel.dcon_mask; + pr_debug("%s: dcon is %08x\n", __func__, dcon); + + switch (chan->req_ch) { + case DMACH_I2S_IN: + case DMACH_I2S_OUT: + case DMACH_PCM_IN: + case DMACH_PCM_OUT: + case DMACH_MIC_IN: + default: + dcon |= S3C2410_DCON_HANDSHAKE; + dcon |= S3C2410_DCON_SYNC_PCLK; + break; + + case DMACH_SDI: + /* note, ensure if need HANDSHAKE or not */ + dcon |= S3C2410_DCON_SYNC_PCLK; + break; + + case DMACH_XD0: + case DMACH_XD1: + dcon |= S3C2410_DCON_HANDSHAKE; + dcon |= S3C2410_DCON_SYNC_HCLK; + break; + } + + switch (xferunit) { + case 1: + dcon |= S3C2410_DCON_BYTE; + break; + + case 2: + dcon |= S3C2410_DCON_HALFWORD; + break; + + case 4: + dcon |= S3C2410_DCON_WORD; + break; + + default: + pr_debug("%s: bad transfer size %d\n", __func__, xferunit); + return -EINVAL; + } + + dcon |= S3C2410_DCON_HWTRIG; + dcon |= S3C2410_DCON_INTREQ; + + pr_debug("%s: dcon now %08x\n", __func__, dcon); + + chan->dcon = dcon; + chan->xfer_unit = xferunit; + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_config); + + +/* s3c2410_dma_devconfig + * + * configure the dma source/destination hardware type and address + * + * source: DMA_FROM_DEVICE: source is hardware + * DMA_TO_DEVICE: source is memory + * + * devaddr: physical address of the source +*/ + +int s3c2410_dma_devconfig(enum dma_ch channel, + enum dma_data_direction source, + unsigned long devaddr) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned int hwcfg; + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: source=%d, devaddr=%08lx\n", + __func__, (int)source, devaddr); + + chan->source = source; + chan->dev_addr = devaddr; + + switch (chan->req_ch) { + case DMACH_XD0: + case DMACH_XD1: + hwcfg = 0; /* AHB */ + break; + + default: + hwcfg = S3C2410_DISRCC_APB; + } + + /* always assume our peripheral desintation is a fixed + * address in memory. */ + hwcfg |= S3C2410_DISRCC_INC; + + switch (source) { + case DMA_FROM_DEVICE: + /* source is hardware */ + pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", + __func__, devaddr, hwcfg); + dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); + dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); + dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); + + chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); + break; + + case DMA_TO_DEVICE: + /* source is memory */ + pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n", + __func__, devaddr, hwcfg); + dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); + dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); + dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); + + chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); + break; + + default: + printk(KERN_ERR "dma%d: invalid source type (%d)\n", + channel, source); + + return -EINVAL; + } + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_devconfig); + +/* s3c2410_dma_getposition + * + * returns the current transfer points for the dma source and destination +*/ + +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + if (src != NULL) + *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); + + if (dst != NULL) + *dst = dma_rdreg(chan, S3C2410_DMA_DCDST); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_getposition); + +/* system core operations */ + +#ifdef CONFIG_PM + +static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp) +{ + printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); + + if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) { + /* the dma channel is still working, which is probably + * a bad thing to do over suspend/resume. We stop the + * channel and assume that the client is either going to + * retry after resume, or that it is broken. + */ + + printk(KERN_INFO "dma: stopping channel %d due to suspend\n", + cp->number); + + s3c2410_dma_dostop(cp); + } +} + +static int s3c2410_dma_suspend(void) +{ + struct s3c2410_dma_chan *cp = s3c2410_chans; + int channel; + + for (channel = 0; channel < dma_channels; cp++, channel++) + s3c2410_dma_suspend_chan(cp); + + return 0; +} + +static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) +{ + unsigned int no = cp->number | DMACH_LOW_LEVEL; + + /* restore channel's hardware configuration */ + + if (!cp->in_use) + return; + + printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); + + s3c2410_dma_config(no, cp->xfer_unit); + s3c2410_dma_devconfig(no, cp->source, cp->dev_addr); + + /* re-select the dma source for this channel */ + + if (cp->map != NULL) + dma_sel.select(cp, cp->map); +} + +static void s3c2410_dma_resume(void) +{ + struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; + int channel; + + for (channel = dma_channels - 1; channel >= 0; cp--, channel--) + s3c2410_dma_resume_chan(cp); +} + +#else +#define s3c2410_dma_suspend NULL +#define s3c2410_dma_resume NULL +#endif /* CONFIG_PM */ + +struct syscore_ops dma_syscore_ops = { + .suspend = s3c2410_dma_suspend, + .resume = s3c2410_dma_resume, +}; + +/* kmem cache implementation */ + +static void s3c2410_dma_cache_ctor(void *p) +{ + memset(p, 0, sizeof(struct s3c2410_dma_buf)); +} + +/* initialisation code */ + +static int __init s3c24xx_dma_syscore_init(void) +{ + register_syscore_ops(&dma_syscore_ops); + + return 0; +} + +late_initcall(s3c24xx_dma_syscore_init); + +int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq, + unsigned int stride) +{ + struct s3c2410_dma_chan *cp; + int channel; + int ret; + + printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n"); + + dma_channels = channels; + + dma_base = ioremap(S3C24XX_PA_DMA, stride * channels); + if (dma_base == NULL) { + printk(KERN_ERR "dma failed to remap register block\n"); + return -ENOMEM; + } + + dma_kmem = kmem_cache_create("dma_desc", + sizeof(struct s3c2410_dma_buf), 0, + SLAB_HWCACHE_ALIGN, + s3c2410_dma_cache_ctor); + + if (dma_kmem == NULL) { + printk(KERN_ERR "dma failed to make kmem cache\n"); + ret = -ENOMEM; + goto err; + } + + for (channel = 0; channel < channels; channel++) { + cp = &s3c2410_chans[channel]; + + memset(cp, 0, sizeof(struct s3c2410_dma_chan)); + + /* dma channel irqs are in order.. */ + cp->number = channel; + cp->irq = channel + irq; + cp->regs = dma_base + (channel * stride); + + /* point current stats somewhere */ + cp->stats = &cp->stats_store; + cp->stats_store.timeout_shortest = LONG_MAX; + + /* basic channel configuration */ + + cp->load_timeout = 1<<18; + + printk("DMA channel %d at %p, irq %d\n", + cp->number, cp->regs, cp->irq); + } + + return 0; + + err: + kmem_cache_destroy(dma_kmem); + iounmap(dma_base); + dma_base = NULL; + return ret; +} + +int __init s3c2410_dma_init(void) +{ + return s3c24xx_dma_init(4, IRQ_DMA0, 0x40); +} + +static inline int is_channel_valid(unsigned int channel) +{ + return (channel & DMA_CH_VALID); +} + +static struct s3c24xx_dma_order *dma_order; + + +/* s3c2410_dma_map_channel() + * + * turn the virtual channel number into a real, and un-used hardware + * channel. + * + * first, try the dma ordering given to us by either the relevant + * dma code, or the board. Then just find the first usable free + * channel +*/ + +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) +{ + struct s3c24xx_dma_order_ch *ord = NULL; + struct s3c24xx_dma_map *ch_map; + struct s3c2410_dma_chan *dmach; + int ch; + + if (dma_sel.map == NULL || channel > dma_sel.map_size) + return NULL; + + ch_map = dma_sel.map + channel; + + /* first, try the board mapping */ + + if (dma_order) { + ord = &dma_order->channels[channel]; + + for (ch = 0; ch < dma_channels; ch++) { + int tmp; + if (!is_channel_valid(ord->list[ch])) + continue; + + tmp = ord->list[ch] & ~DMA_CH_VALID; + if (s3c2410_chans[tmp].in_use == 0) { + ch = tmp; + goto found; + } + } + + if (ord->flags & DMA_CH_NEVER) + return NULL; + } + + /* second, search the channel map for first free */ + + for (ch = 0; ch < dma_channels; ch++) { + if (!is_channel_valid(ch_map->channels[ch])) + continue; + + if (s3c2410_chans[ch].in_use == 0) { + printk("mapped channel %d to %d\n", channel, ch); + break; + } + } + + if (ch >= dma_channels) + return NULL; + + /* update our channel mapping */ + + found: + dmach = &s3c2410_chans[ch]; + dmach->map = ch_map; + dmach->req_ch = channel; + s3c_dma_chan_map[channel] = dmach; + + /* select the channel */ + + (dma_sel.select)(dmach, ch_map); + + return dmach; +} + +static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) +{ + return 0; +} + +int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) +{ + struct s3c24xx_dma_map *nmap; + size_t map_sz = sizeof(*nmap) * sel->map_size; + int ptr; + + nmap = kmemdup(sel->map, map_sz, GFP_KERNEL); + if (nmap == NULL) + return -ENOMEM; + + memcpy(&dma_sel, sel, sizeof(*sel)); + + dma_sel.map = nmap; + + for (ptr = 0; ptr < sel->map_size; ptr++) + s3c24xx_dma_check_entry(nmap+ptr, ptr); + + return 0; +} + +int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord) +{ + struct s3c24xx_dma_order *nord = dma_order; + + if (nord == NULL) + nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL); + + if (nord == NULL) { + printk(KERN_ERR "no memory to store dma channel order\n"); + return -ENOMEM; + } + + dma_order = nord; + memcpy(nord, ord, sizeof(struct s3c24xx_dma_order)); + return 0; +} diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/gta02.h index 21739348215..9430a71e918 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/gta02.h @@ -1,5 +1,13 @@ -#ifndef _GTA02_H -#define _GTA02_H +/* + * GTA02 header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_GTA02_H +#define __MACH_S3C24XX_GTA02_H __FILE__ #include <mach/regs-gpio.h> @@ -12,4 +20,4 @@ #define GTA02_IRQ_PCF50633 IRQ_EINT9 -#endif /* _GTA02_H */ +#endif /* __MACH_S3C24XX_GTA02_H */ diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c index 3f40c61b6e0..b4d14b86436 100644 --- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c +++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c @@ -19,10 +19,12 @@ #include <linux/gpio.h> #include <linux/rfkill.h> -#include <mach/regs-gpio.h> +#include <plat/gpio-cfg.h> #include <mach/hardware.h> -#include <mach/h1940-latch.h> -#include <mach/h1940.h> +#include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> + +#include "h1940.h" #define DRV_NAME "h1940-bt" diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/h1940.h index fc897d3a056..2950cc46684 100644 --- a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c24xx/h1940.h @@ -1,20 +1,30 @@ -/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h +/* + * Copyright 2006 Ben Dooks <ben-linux@fluff.org> * * Copyright (c) 2005 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * iPAQ H1940 series - latch definitions + * iPAQ H1940 series definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_H1940_LATCH_H -#define __ASM_ARCH_H1940_LATCH_H +#ifndef __MACH_S3C24XX_H1940_H +#define __MACH_S3C24XX_H1940_H __FILE__ -#include <asm/gpio.h> +#define H1940_SUSPEND_CHECKSUM (0x30003ff8) +#define H1940_SUSPEND_RESUMEAT (0x30081000) +#define H1940_SUSPEND_CHECK (0x30080000) + +extern void h1940_pm_return(void); +extern int h1940_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, + unsigned long *delay_off); + +#include <linux/gpio.h> #define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) @@ -40,4 +50,4 @@ #define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) #define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) -#endif /* __ASM_ARCH_H1940_LATCH_H */ +#endif /* __MACH_S3C24XX_H1940_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h deleted file mode 100644 index 1b614d5a81f..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * ANUBIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISCPLD_H -#define __ASM_ARCH_ANUBISCPLD_H - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define ANUBIS_CTRL1_NANDSEL (0x3) - -/* IDREG - revision */ - -#define ANUBIS_IDREG_REVMASK (0x7) - -#endif /* __ASM_ARCH_ANUBISCPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h deleted file mode 100644 index a2a328134e3..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * ANUBIS - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISIRQ_H -#define __ASM_ARCH_ANUBISIRQ_H - -#define IRQ_IDE0 IRQ_EINT2 -#define IRQ_IDE1 IRQ_EINT3 -#define IRQ_ASIX IRQ_EINT1 - -#endif /* __ASM_ARCH_ANUBISIRQ_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h deleted file mode 100644 index c9deb3a5b2c..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-map.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * ANUBIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_ANUBISMAP_H -#define __ASM_ARCH_ANUBISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) - -#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */ -#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD) - -#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */ -#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23)) - -#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) -#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) -#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) -#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) - -#endif /* __ASM_ARCH_ANUBISMAP_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h deleted file mode 100644 index bee2a7a932a..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * BAST - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTCPLD_H -#define __ASM_ARCH_BASTCPLD_H - -/* CTRL1 - Audio LR routing */ - -#define BAST_CPLD_CTRL1_LRCOFF (0x00) -#define BAST_CPLD_CTRL1_LRCADC (0x01) -#define BAST_CPLD_CTRL1_LRCDAC (0x02) -#define BAST_CPLD_CTRL1_LRCARM (0x03) -#define BAST_CPLD_CTRL1_LRMASK (0x03) - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define BAST_CPLD_CTRL2_WNAND (0x04) -#define BAST_CPLD_CTLR2_IDERST (0x08) - -/* CTRL3 - rom write control, CPLD identity */ - -#define BAST_CPLD_CTRL3_IDMASK (0x0e) -#define BAST_CPLD_CTRL3_ROMWEN (0x01) - -/* CTRL4 - 8bit LCD interface control/status */ - -#define BAST_CPLD_CTRL4_LLAT (0x01) -#define BAST_CPLD_CTRL4_LCDRW (0x02) -#define BAST_CPLD_CTRL4_LCDCMD (0x04) -#define BAST_CPLD_CTRL4_LCDE2 (0x01) - -/* CTRL5 - DMA routing */ - -#define BAST_CPLD_DMA0_PRIIDE (0<<0) -#define BAST_CPLD_DMA0_SECIDE (1<<0) -#define BAST_CPLD_DMA0_ISA15 (2<<0) -#define BAST_CPLD_DMA0_ISA36 (3<<0) - -#define BAST_CPLD_DMA1_PRIIDE (0<<2) -#define BAST_CPLD_DMA1_SECIDE (1<<2) -#define BAST_CPLD_DMA1_ISA15 (2<<2) -#define BAST_CPLD_DMA1_ISA36 (3<<2) - -#endif /* __ASM_ARCH_BASTCPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h deleted file mode 100644 index cac428c42e7..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h +++ /dev/null @@ -1,29 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-irq.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine BAST - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTIRQ_H -#define __ASM_ARCH_BASTIRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT18 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_PCSERIAL1 IRQ_EINT15 -#define IRQ_PCSERIAL2 IRQ_EINT14 -#define IRQ_PCPARALLEL IRQ_EINT13 -#define IRQ_ASIX IRQ_EINT11 -#define IRQ_DM9000 IRQ_EINT10 -#define IRQ_ISA IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_BASTIRQ_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h deleted file mode 100644 index eecea2a50f8..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h +++ /dev/null @@ -1,146 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-map.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine BAST - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_BASTMAP_H -#define __ASM_ARCH_BASTMAP_H - -#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */ -#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */ -#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */ -#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */ -#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) - -#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) - -#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) - -#define BAST_PA_LCD_RCMD1 (0x8800000) -#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) - -#define BAST_PA_LCD_WCMD1 (0x8000000) -#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) - -#define BAST_PA_LCD_RDATA1 (0x9800000) -#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) - -#define BAST_PA_LCD_WDATA1 (0x9000000) -#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) - -#define BAST_PA_LCD_RCMD2 (0xA800000) -#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) - -#define BAST_PA_LCD_WCMD2 (0xA000000) -#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) - -#define BAST_PA_LCD_RDATA2 (0xB800000) -#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) - -#define BAST_PA_LCD_WDATA2 (0xB000000) -#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) - - -/* 0xE0000000 contains the IO space that is split by speed and - * whether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x00000000 to 0x01000000 16MB ISA IO space - * 0x01000000 to 0x02000000 16MB ISA memory space - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02400000 to 0x02500000 1MB ASIX ethernet controller - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller - * 0x02600000 to 0x02700000 1MB PC SuperIO controller - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) -#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) -#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) -#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) -#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) -#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) -#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) -#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) -#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VAM_CS2 (0x00000000) -#define BAST_VAM_CS3 (0x04000000) -#define BAST_VAM_CS4 (0x08000000) -#define BAST_VAM_CS5 (0x0C000000) - -/* physical offset addresses for the peripherals */ - -#define BAST_PA_ISAIO (0x00000000) -#define BAST_PA_ASIXNET (0x01000000) -#define BAST_PA_SUPERIO (0x01800000) -#define BAST_PA_IDEPRI (0x02000000) -#define BAST_PA_IDEPRIAUX (0x02800000) -#define BAST_PA_IDESEC (0x03000000) -#define BAST_PA_IDESECAUX (0x03800000) -#define BAST_PA_ISAMEM (0x04000000) -#define BAST_PA_DM9000 (0x05000000) - -/* some configurations for the peripherals */ - -#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) -/* */ - -#define BAST_ASIXNET_CS BAST_VAM_CS5 -#define BAST_IDE_CS BAST_VAM_CS5 -#define BAST_DM9000_CS BAST_VAM_CS4 - -#endif /* __ASM_ARCH_BASTMAP_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S deleted file mode 100644 index 4135de87d1f..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ /dev/null @@ -1,101 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/map.h> -#include <mach/regs-gpio.h> -#include <plat/regs-serial.h> - -#define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx -#endif - -/* include the reset of the code which will do the work */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 6b72d5a4b37..b55da1d8cd8 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,6 @@ */ enum dma_ch { - DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S deleted file mode 100644 index 7615a14773f..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include <mach/hardware.h> -#include <asm/irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [ \base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [ \base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h deleted file mode 100644 index c53ad34c657..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h +++ /dev/null @@ -1 +0,0 @@ -#include <plat/gpio-fns.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h index 3890a05948f..528fcdc4f63 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h @@ -1,44 +1,44 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h - * +/* * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 - GPIO bank numbering + * S3C2410 - GPIO lib support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __MACH_GPIONRS_H -#define __MACH_GPIONRS_H - -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) +/* some boards require extra gpio capacity to support external + * devices that need GPIO. + */ -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) +#ifndef GPIO_SAMSUNG_S3C24XX_H +#define GPIO_SAMSUNG_S3C24XX_H -/* GPIO sizes for various SoCs: +/* + * GPIO sizes for various SoCs: * - * 2442 * 2410 2412 2440 2443 2416 + * 2442 * ---- ---- ---- ---- ---- - * A 23 22 25 16 25 - * B 11 11 11 11 9 - * C 16 15 16 16 16 - * D 16 16 16 16 16 - * E 16 16 16 16 16 - * F 8 8 8 8 8 - * G 16 16 16 16 8 - * H 11 11 9 15 15 - * J -- -- 13 16 -- - * K -- -- -- -- 16 - * L -- -- -- 15 7 - * M -- -- -- 2 2 + * A 23 22 25 16 27 + * B 11 11 11 11 11 + * C 16 16 16 16 16 + * D 16 16 16 16 16 + * E 16 16 16 16 16 + * F 8 8 8 8 8 + * G 16 16 16 16 8 + * H 11 11 11 15 15 + * J -- -- 13 16 -- + * K -- -- -- -- 16 + * L -- -- -- 15 14 + * M -- -- -- 2 2 */ /* GPIO bank sizes */ + #define S3C2410_GPIO_A_NR (32) #define S3C2410_GPIO_B_NR (32) #define S3C2410_GPIO_C_NR (32) @@ -93,5 +93,12 @@ enum s3c_gpio_number { #define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) #define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) -#endif /* __MACH_GPIONRS_H */ +#ifdef CONFIG_CPU_S3C244X +#define S3C_GPIO_END (S3C2410_GPJ(0) + 32) +#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) +#define S3C_GPIO_END (S3C2410_GPM(0) + 32) +#else +#define S3C_GPIO_END (S3C2410_GPH(0) + 32) +#endif +#endif /* GPIO_SAMSUNG_S3C24XX_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h deleted file mode 100644 index c410a078622..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/mach-s3c24100/include/mach/gpio-core.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - GPIO core support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_CORE_H -#define __ASM_ARCH_GPIO_CORE_H __FILE__ - -#include <mach/regs-gpio.h> - -extern struct samsung_gpio_chip s3c24xx_gpios[]; - -static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin) -{ - struct samsung_gpio_chip *chip; - - if (pin > S3C_GPIO_END) - return NULL; - - chip = &s3c24xx_gpios[pin/32]; - return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL; -} - -#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h deleted file mode 100644 index 6fac70f3484..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/gpio.h +++ /dev/null @@ -1,35 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* some boards require extra gpio capacity to support external - * devices that need GPIO. - */ - -#ifdef CONFIG_CPU_S3C244X -#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA) -#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) -#define ARCH_NR_GPIOS (32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA) -#else -#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) -#endif - -#include <mach/gpio-nrs.h> -#include <mach/gpio-fns.h> - -#ifdef CONFIG_CPU_S3C244X -#define S3C_GPIO_END (S3C2410_GPJ(0) + 32) -#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) -#define S3C_GPIO_END (S3C2410_GPM(0) + 32) -#else -#define S3C_GPIO_END (S3C2410_GPH(0) + 32) -#endif diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h deleted file mode 100644 index 2aa683c8d3d..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/h1940.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/h1940.h - * - * Copyright 2006 Ben Dooks <ben-linux@fluff.org> - * - * H1940 definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_H -#define __ASM_ARCH_H1940_H - -#define H1940_SUSPEND_CHECKSUM (0x30003ff8) -#define H1940_SUSPEND_RESUMEAT (0x30081000) -#define H1940_SUSPEND_CHECK (0x30080000) - -extern void h1940_pm_return(void); -extern int h1940_led_blink_set(unsigned gpio, int state, - unsigned long *delay_on, unsigned long *delay_off); - - -#endif /* __ASM_ARCH_H1940_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h index aef5631eac5..dedd3837c19 100644 --- a/arch/arm/mach-s3c24xx/include/mach/hardware.h +++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/hardware.h - * +/* * Copyright (c) 2003 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -17,26 +16,9 @@ extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); -#ifdef CONFIG_CPU_S3C2440 - -extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); - -#endif /* CONFIG_CPU_S3C2440 */ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); - -#endif /* CONFIG_CPU_S3C2412 */ - #endif /* __ASSEMBLY__ */ #include <asm/sizes.h> #include <mach/map.h> -/* machine specific hardware definitions should go after this */ - -/* currently here until moved into config (todo) */ -#define CONFIG_NO_MULTIWORD_IO - #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h deleted file mode 100644 index e9ddd706b16..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/idle.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/idle.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU Idle controls -*/ - -#ifndef __ASM_ARCH_IDLE_H -#define __ASM_ARCH_IDLE_H __FILE__ - -/* This allows the over-ride of the default idle code, in case there - * is any other things to be done over idle (like DVS) -*/ - -extern void (*s3c24xx_idle)(void); - -extern void s3c24xx_default_idle(void); - -#endif /* __ASM_ARCH_IDLE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index b7a9f4d469e..b6dd4cb5a2e 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -59,49 +59,53 @@ #define IRQ_ADCPARENT S3C2410_IRQ(31) /* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) +#define IRQ_EINT0_2412 S3C2410_IRQ(32) +#define IRQ_EINT1_2412 S3C2410_IRQ(33) +#define IRQ_EINT2_2412 S3C2410_IRQ(34) +#define IRQ_EINT3_2412 S3C2410_IRQ(35) +#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */ +#define IRQ_EINT5 S3C2410_IRQ(37) +#define IRQ_EINT6 S3C2410_IRQ(38) +#define IRQ_EINT7 S3C2410_IRQ(39) +#define IRQ_EINT8 S3C2410_IRQ(40) +#define IRQ_EINT9 S3C2410_IRQ(41) +#define IRQ_EINT10 S3C2410_IRQ(42) +#define IRQ_EINT11 S3C2410_IRQ(43) +#define IRQ_EINT12 S3C2410_IRQ(44) +#define IRQ_EINT13 S3C2410_IRQ(45) +#define IRQ_EINT14 S3C2410_IRQ(46) +#define IRQ_EINT15 S3C2410_IRQ(47) +#define IRQ_EINT16 S3C2410_IRQ(48) +#define IRQ_EINT17 S3C2410_IRQ(49) +#define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT19 S3C2410_IRQ(51) +#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */ +#define IRQ_EINT21 S3C2410_IRQ(53) +#define IRQ_EINT22 S3C2410_IRQ(54) +#define IRQ_EINT23 S3C2410_IRQ(55) #define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) +#define IRQ_LCD_FIFO S3C2410_IRQ(56) +#define IRQ_LCD_FRAME S3C2410_IRQ(57) /* IRQs for the interal UARTs, and ADC * these need to be ordered in number of appearance in the * SUBSRC mask register */ -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58) -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */ #define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) #define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */ #define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) #define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */ #define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) #define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) @@ -136,7 +140,7 @@ /* second interrupt-register of s3c2416/s3c2450 */ -#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29) +#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29) #define IRQ_S3C2416_2D S3C2416_IRQ(0) #define IRQ_S3C2416_IIC1 S3C2416_IRQ(1) #define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2) @@ -188,10 +192,8 @@ #if defined(CONFIG_CPU_S3C2416) #define NR_IRQS (IRQ_S3C2416_I2S1 + 1) -#elif defined(CONFIG_CPU_S3C2443) -#define NR_IRQS (IRQ_S3C2443_AC97+1) #else -#define NR_IRQS (IRQ_S3C2440_AC97+1) +#define NR_IRQS (IRQ_S3C2443_AC97 + 1) #endif /* compatibility define. */ diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h index 8ba381f2dbe..444793f0f5f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/map.h +++ b/arch/arm/mach-s3c24xx/include/mach/map.h @@ -167,4 +167,6 @@ #define S3C_PA_SPI0 S3C2443_PA_SPI0 #define S3C_PA_SPI1 S3C2443_PA_SPI1 +#define SAMSUNG_PA_TIMER S3C2410_PA_TIMER + #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h deleted file mode 100644 index e9e36b0abba..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h - * - * Copyright 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * OSIRIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_OSIRISCPLD_H -#define __ASM_ARCH_OSIRISCPLD_H - -/* CTRL0 - NAND WP control */ - -#define OSIRIS_CTRL0_NANDSEL (0x3) -#define OSIRIS_CTRL0_BOOT_INT (1<<3) -#define OSIRIS_CTRL0_PCMCIA (1<<4) -#define OSIRIS_CTRL0_FIX8 (1<<5) -#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) -#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) - -#define OSIRIS_CTRL1_FIX8 (1<<0) - -#define OSIRIS_ID_REVMASK (0x7) - -#endif /* __ASM_ARCH_OSIRISCPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d..3db6c10de02 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h @@ -42,24 +42,6 @@ #define S3C2410_CLKCON_IIS (1<<17) #define S3C2410_CLKCON_SPI (1<<18) -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h deleted file mode 100644 index 98fd4a05587..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h +++ /dev/null @@ -1,220 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440/S3C2412 Signal Drive Strength Control -*/ - - -#ifndef __ASM_ARCH_REGS_DSC_H -#define __ASM_ARCH_REGS_DSC_H "2440-dsc" - -#if defined(CONFIG_CPU_S3C2412) -#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) -#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) -#endif - -#if defined(CONFIG_CPU_S3C2416) -#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) -#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) -#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) -#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) - -#define S3C2416_SELECT_DSC0 (0 << 30) -#define S3C2416_SELECT_DSC1 (1 << 30) -#define S3C2416_SELECT_DSC2 (2 << 30) -#define S3C2416_SELECT_DSC3 (3 << 30) - -#define S3C2416_DSC_GETSHIFT(x) (x & 30) - -#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) -#define S3C2416_DSC0_CF_5mA (0 << 28) -#define S3C2416_DSC0_CF_10mA (1 << 28) -#define S3C2416_DSC0_CF_15mA (2 << 28) -#define S3C2416_DSC0_CF_21mA (3 << 28) -#define S3C2416_DSC0_CF_MASK (3 << 28) - -#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) -#define S3C2416_DSC0_nRBE_5mA (0 << 26) -#define S3C2416_DSC0_nRBE_10mA (1 << 26) -#define S3C2416_DSC0_nRBE_15mA (2 << 26) -#define S3C2416_DSC0_nRBE_21mA (3 << 26) -#define S3C2416_DSC0_nRBE_MASK (3 << 26) - -#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) -#define S3C2416_DSC0_nROE_5mA (0 << 24) -#define S3C2416_DSC0_nROE_10mA (1 << 24) -#define S3C2416_DSC0_nROE_15mA (2 << 24) -#define S3C2416_DSC0_nROE_21mA (3 << 24) -#define S3C2416_DSC0_nROE_MASK (3 << 24) - -#endif - -#if defined(CONFIG_CPU_S3C244X) - -#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) -#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) - -#define S3C2440_SELECT_DSC0 (0) -#define S3C2440_SELECT_DSC1 (1<<31) - -#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) - -#define S3C2440_DSC0_DISABLE (1<<31) - -#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) -#define S3C2440_DSC0_ADDR_12mA (0<<8) -#define S3C2440_DSC0_ADDR_10mA (1<<8) -#define S3C2440_DSC0_ADDR_8mA (2<<8) -#define S3C2440_DSC0_ADDR_6mA (3<<8) -#define S3C2440_DSC0_ADDR_MASK (3<<8) - -/* D24..D31 */ -#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) -#define S3C2440_DSC0_DATA3_12mA (0<<6) -#define S3C2440_DSC0_DATA3_10mA (1<<6) -#define S3C2440_DSC0_DATA3_8mA (2<<6) -#define S3C2440_DSC0_DATA3_6mA (3<<6) -#define S3C2440_DSC0_DATA3_MASK (3<<6) - -/* D16..D23 */ -#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) -#define S3C2440_DSC0_DATA2_12mA (0<<4) -#define S3C2440_DSC0_DATA2_10mA (1<<4) -#define S3C2440_DSC0_DATA2_8mA (2<<4) -#define S3C2440_DSC0_DATA2_6mA (3<<4) -#define S3C2440_DSC0_DATA2_MASK (3<<4) - -/* D8..D15 */ -#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) -#define S3C2440_DSC0_DATA1_12mA (0<<2) -#define S3C2440_DSC0_DATA1_10mA (1<<2) -#define S3C2440_DSC0_DATA1_8mA (2<<2) -#define S3C2440_DSC0_DATA1_6mA (3<<2) -#define S3C2440_DSC0_DATA1_MASK (3<<2) - -/* D0..D7 */ -#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) -#define S3C2440_DSC0_DATA0_12mA (0<<0) -#define S3C2440_DSC0_DATA0_10mA (1<<0) -#define S3C2440_DSC0_DATA0_8mA (2<<0) -#define S3C2440_DSC0_DATA0_6mA (3<<0) -#define S3C2440_DSC0_DATA0_MASK (3<<0) - -#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) -#define S3C2440_DSC1_SCK1_12mA (0<<28) -#define S3C2440_DSC1_SCK1_10mA (1<<28) -#define S3C2440_DSC1_SCK1_8mA (2<<28) -#define S3C2440_DSC1_SCK1_6mA (3<<28) -#define S3C2440_DSC1_SCK1_MASK (3<<28) - -#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) -#define S3C2440_DSC1_SCK0_12mA (0<<26) -#define S3C2440_DSC1_SCK0_10mA (1<<26) -#define S3C2440_DSC1_SCK0_8mA (2<<26) -#define S3C2440_DSC1_SCK0_6mA (3<<26) -#define S3C2440_DSC1_SCK0_MASK (3<<26) - -#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) -#define S3C2440_DSC1_SCKE_10mA (0<<24) -#define S3C2440_DSC1_SCKE_8mA (1<<24) -#define S3C2440_DSC1_SCKE_6mA (2<<24) -#define S3C2440_DSC1_SCKE_4mA (3<<24) -#define S3C2440_DSC1_SCKE_MASK (3<<24) - -/* SDRAM nRAS/nCAS */ -#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) -#define S3C2440_DSC1_SDR_10mA (0<<22) -#define S3C2440_DSC1_SDR_8mA (1<<22) -#define S3C2440_DSC1_SDR_6mA (2<<22) -#define S3C2440_DSC1_SDR_4mA (3<<22) -#define S3C2440_DSC1_SDR_MASK (3<<22) - -/* NAND Flash Controller */ -#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) -#define S3C2440_DSC1_NFC_10mA (0<<20) -#define S3C2440_DSC1_NFC_8mA (1<<20) -#define S3C2440_DSC1_NFC_6mA (2<<20) -#define S3C2440_DSC1_NFC_4mA (3<<20) -#define S3C2440_DSC1_NFC_MASK (3<<20) - -/* nBE[0..3] */ -#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) -#define S3C2440_DSC1_nBE_10mA (0<<18) -#define S3C2440_DSC1_nBE_8mA (1<<18) -#define S3C2440_DSC1_nBE_6mA (2<<18) -#define S3C2440_DSC1_nBE_4mA (3<<18) -#define S3C2440_DSC1_nBE_MASK (3<<18) - -#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) -#define S3C2440_DSC1_WOE_10mA (0<<16) -#define S3C2440_DSC1_WOE_8mA (1<<16) -#define S3C2440_DSC1_WOE_6mA (2<<16) -#define S3C2440_DSC1_WOE_4mA (3<<16) -#define S3C2440_DSC1_WOE_MASK (3<<16) - -#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) -#define S3C2440_DSC1_CS7_10mA (0<<14) -#define S3C2440_DSC1_CS7_8mA (1<<14) -#define S3C2440_DSC1_CS7_6mA (2<<14) -#define S3C2440_DSC1_CS7_4mA (3<<14) -#define S3C2440_DSC1_CS7_MASK (3<<14) - -#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) -#define S3C2440_DSC1_CS6_10mA (0<<12) -#define S3C2440_DSC1_CS6_8mA (1<<12) -#define S3C2440_DSC1_CS6_6mA (2<<12) -#define S3C2440_DSC1_CS6_4mA (3<<12) -#define S3C2440_DSC1_CS6_MASK (3<<12) - -#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) -#define S3C2440_DSC1_CS5_10mA (0<<10) -#define S3C2440_DSC1_CS5_8mA (1<<10) -#define S3C2440_DSC1_CS5_6mA (2<<10) -#define S3C2440_DSC1_CS5_4mA (3<<10) -#define S3C2440_DSC1_CS5_MASK (3<<10) - -#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) -#define S3C2440_DSC1_CS4_10mA (0<<8) -#define S3C2440_DSC1_CS4_8mA (1<<8) -#define S3C2440_DSC1_CS4_6mA (2<<8) -#define S3C2440_DSC1_CS4_4mA (3<<8) -#define S3C2440_DSC1_CS4_MASK (3<<8) - -#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) -#define S3C2440_DSC1_CS3_10mA (0<<6) -#define S3C2440_DSC1_CS3_8mA (1<<6) -#define S3C2440_DSC1_CS3_6mA (2<<6) -#define S3C2440_DSC1_CS3_4mA (3<<6) -#define S3C2440_DSC1_CS3_MASK (3<<6) - -#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) -#define S3C2440_DSC1_CS2_10mA (0<<4) -#define S3C2440_DSC1_CS2_8mA (1<<4) -#define S3C2440_DSC1_CS2_6mA (2<<4) -#define S3C2440_DSC1_CS2_4mA (3<<4) -#define S3C2440_DSC1_CS2_MASK (3<<4) - -#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) -#define S3C2440_DSC1_CS1_10mA (0<<2) -#define S3C2440_DSC1_CS1_8mA (1<<2) -#define S3C2440_DSC1_CS1_6mA (2<<2) -#define S3C2440_DSC1_CS1_4mA (3<<2) -#define S3C2440_DSC1_CS1_MASK (3<<2) - -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) -#define S3C2440_DSC1_CS0_10mA (0<<0) -#define S3C2440_DSC1_CS0_8mA (1<<0) -#define S3C2440_DSC1_CS0_6mA (2<<0) -#define S3C2440_DSC1_CS0_4mA (3<<0) -#define S3C2440_DSC1_CS0_MASK (3<<0) - -#endif /* CONFIG_CPU_S3C2440 */ - -#endif /* __ASM_ARCH_REGS_DSC_H */ - diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index a11a638bd59..c6583cfa583 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -14,8 +14,6 @@ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H -#include <mach/gpio-nrs.h> - #define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) /* general configuration options */ @@ -459,9 +457,6 @@ /* miscellaneous control */ #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) /* see clock.h for dclk definitions */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h deleted file mode 100644 index e0c67b0163d..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h +++ /dev/null @@ -1,202 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-mem.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Memory Control register definitions -*/ - -#ifndef __ASM_ARM_MEMREGS_H -#define __ASM_ARM_MEMREGS_H - -#ifndef S3C2410_MEMREG -#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -/* bus width, and wait state control */ -#define S3C2410_BWSCON S3C2410_MEMREG(0x0000) - -/* bank zero config - note, pinstrapped from OM pins! */ -#define S3C2410_BWSCON_DW0_16 (1<<1) -#define S3C2410_BWSCON_DW0_32 (2<<1) - -/* bank one configs */ -#define S3C2410_BWSCON_DW1_8 (0<<4) -#define S3C2410_BWSCON_DW1_16 (1<<4) -#define S3C2410_BWSCON_DW1_32 (2<<4) -#define S3C2410_BWSCON_WS1 (1<<6) -#define S3C2410_BWSCON_ST1 (1<<7) - -/* bank 2 configurations */ -#define S3C2410_BWSCON_DW2_8 (0<<8) -#define S3C2410_BWSCON_DW2_16 (1<<8) -#define S3C2410_BWSCON_DW2_32 (2<<8) -#define S3C2410_BWSCON_WS2 (1<<10) -#define S3C2410_BWSCON_ST2 (1<<11) - -/* bank 3 configurations */ -#define S3C2410_BWSCON_DW3_8 (0<<12) -#define S3C2410_BWSCON_DW3_16 (1<<12) -#define S3C2410_BWSCON_DW3_32 (2<<12) -#define S3C2410_BWSCON_WS3 (1<<14) -#define S3C2410_BWSCON_ST3 (1<<15) - -/* bank 4 configurations */ -#define S3C2410_BWSCON_DW4_8 (0<<16) -#define S3C2410_BWSCON_DW4_16 (1<<16) -#define S3C2410_BWSCON_DW4_32 (2<<16) -#define S3C2410_BWSCON_WS4 (1<<18) -#define S3C2410_BWSCON_ST4 (1<<19) - -/* bank 5 configurations */ -#define S3C2410_BWSCON_DW5_8 (0<<20) -#define S3C2410_BWSCON_DW5_16 (1<<20) -#define S3C2410_BWSCON_DW5_32 (2<<20) -#define S3C2410_BWSCON_WS5 (1<<22) -#define S3C2410_BWSCON_ST5 (1<<23) - -/* bank 6 configurations */ -#define S3C2410_BWSCON_DW6_8 (0<<24) -#define S3C2410_BWSCON_DW6_16 (1<<24) -#define S3C2410_BWSCON_DW6_32 (2<<24) -#define S3C2410_BWSCON_WS6 (1<<26) -#define S3C2410_BWSCON_ST6 (1<<27) - -/* bank 7 configurations */ -#define S3C2410_BWSCON_DW7_8 (0<<28) -#define S3C2410_BWSCON_DW7_16 (1<<28) -#define S3C2410_BWSCON_DW7_32 (2<<28) -#define S3C2410_BWSCON_WS7 (1<<30) -#define S3C2410_BWSCON_ST7 (1<<31) - -/* accesor functions for getting BANK(n) configuration. (n != 0) */ - -#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf) - -#define S3C2410_BWSCON_DW8 (0) -#define S3C2410_BWSCON_DW16 (1) -#define S3C2410_BWSCON_DW32 (2) -#define S3C2410_BWSCON_WS (1 << 2) -#define S3C2410_BWSCON_ST (1 << 3) - -/* memory set (rom, ram) */ -#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) -#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) -#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C) -#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010) -#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014) -#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018) -#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C) -#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020) - -/* bank configuration registers */ - -#define S3C2410_BANKCON_PMCnorm (0x00) -#define S3C2410_BANKCON_PMC4 (0x01) -#define S3C2410_BANKCON_PMC8 (0x02) -#define S3C2410_BANKCON_PMC16 (0x03) - -/* bank configurations for banks 0..7, note banks - * 6 and 7 have different configurations depending on - * the memory type bits */ - -#define S3C2410_BANKCON_Tacp2 (0x0 << 2) -#define S3C2410_BANKCON_Tacp3 (0x1 << 2) -#define S3C2410_BANKCON_Tacp4 (0x2 << 2) -#define S3C2410_BANKCON_Tacp6 (0x3 << 2) -#define S3C2410_BANKCON_Tacp_SHIFT (2) - -#define S3C2410_BANKCON_Tcah0 (0x0 << 4) -#define S3C2410_BANKCON_Tcah1 (0x1 << 4) -#define S3C2410_BANKCON_Tcah2 (0x2 << 4) -#define S3C2410_BANKCON_Tcah4 (0x3 << 4) -#define S3C2410_BANKCON_Tcah_SHIFT (4) - -#define S3C2410_BANKCON_Tcoh0 (0x0 << 6) -#define S3C2410_BANKCON_Tcoh1 (0x1 << 6) -#define S3C2410_BANKCON_Tcoh2 (0x2 << 6) -#define S3C2410_BANKCON_Tcoh4 (0x3 << 6) -#define S3C2410_BANKCON_Tcoh_SHIFT (6) - -#define S3C2410_BANKCON_Tacc1 (0x0 << 8) -#define S3C2410_BANKCON_Tacc2 (0x1 << 8) -#define S3C2410_BANKCON_Tacc3 (0x2 << 8) -#define S3C2410_BANKCON_Tacc4 (0x3 << 8) -#define S3C2410_BANKCON_Tacc6 (0x4 << 8) -#define S3C2410_BANKCON_Tacc8 (0x5 << 8) -#define S3C2410_BANKCON_Tacc10 (0x6 << 8) -#define S3C2410_BANKCON_Tacc14 (0x7 << 8) -#define S3C2410_BANKCON_Tacc_SHIFT (8) - -#define S3C2410_BANKCON_Tcos0 (0x0 << 11) -#define S3C2410_BANKCON_Tcos1 (0x1 << 11) -#define S3C2410_BANKCON_Tcos2 (0x2 << 11) -#define S3C2410_BANKCON_Tcos4 (0x3 << 11) -#define S3C2410_BANKCON_Tcos_SHIFT (11) - -#define S3C2410_BANKCON_Tacs0 (0x0 << 13) -#define S3C2410_BANKCON_Tacs1 (0x1 << 13) -#define S3C2410_BANKCON_Tacs2 (0x2 << 13) -#define S3C2410_BANKCON_Tacs4 (0x3 << 13) -#define S3C2410_BANKCON_Tacs_SHIFT (13) - -#define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2410_BANKCON_SDRAM (0x3 << 15) - -/* next bits only for SDRAM in 6,7 */ -#define S3C2410_BANKCON_Trcd2 (0x00 << 2) -#define S3C2410_BANKCON_Trcd3 (0x01 << 2) -#define S3C2410_BANKCON_Trcd4 (0x02 << 2) - -/* control column address select */ -#define S3C2410_BANKCON_SCANb8 (0x00 << 0) -#define S3C2410_BANKCON_SCANb9 (0x01 << 0) -#define S3C2410_BANKCON_SCANb10 (0x02 << 0) - -#define S3C2410_REFRESH S3C2410_MEMREG(0x0024) -#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028) -#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C) -#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030) - -/* refresh control */ - -#define S3C2410_REFRESH_REFEN (1<<23) -#define S3C2410_REFRESH_SELF (1<<22) -#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1) - -#define S3C2410_REFRESH_TRP_MASK (3<<20) -#define S3C2410_REFRESH_TRP_2clk (0<<20) -#define S3C2410_REFRESH_TRP_3clk (1<<20) -#define S3C2410_REFRESH_TRP_4clk (2<<20) - -#define S3C2410_REFRESH_TSRC_MASK (3<<18) -#define S3C2410_REFRESH_TSRC_4clk (0<<18) -#define S3C2410_REFRESH_TSRC_5clk (1<<18) -#define S3C2410_REFRESH_TSRC_6clk (2<<18) -#define S3C2410_REFRESH_TSRC_7clk (3<<18) - - -/* mode select register(s) */ - -#define S3C2410_MRSRB_CL1 (0x00 << 4) -#define S3C2410_MRSRB_CL2 (0x02 << 4) -#define S3C2410_MRSRB_CL3 (0x03 << 4) - -/* bank size register */ -#define S3C2410_BANKSIZE_128M (0x2 << 0) -#define S3C2410_BANKSIZE_64M (0x1 << 0) -#define S3C2410_BANKSIZE_32M (0x0 << 0) -#define S3C2410_BANKSIZE_16M (0x7 << 0) -#define S3C2410_BANKSIZE_8M (0x6 << 0) -#define S3C2410_BANKSIZE_4M (0x5 << 0) -#define S3C2410_BANKSIZE_2M (0x4 << 0) -#define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2410_BANKSIZE_SCLK_EN (1<<4) -#define S3C2410_BANKSIZE_SCKE_EN (1<<5) -#define S3C2410_BANKSIZE_BURST (1<<7) - -#endif /* __ASM_ARM_MEMREGS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h deleted file mode 100644 index 4932b87bdf3..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-power.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-power.h - * - * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX power control register definitions -*/ - -#ifndef __ASM_ARM_REGS_PWR -#define __ASM_ARM_REGS_PWR __FILE__ - -#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) -#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) - -#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) -#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) -#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) -#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) - -#define S3C2412_PWRCFG_BATF_IRQ (1<<0) -#define S3C2412_PWRCFG_BATF_IGNORE (2<<0) -#define S3C2412_PWRCFG_BATF_SLEEP (3<<0) -#define S3C2412_PWRCFG_BATF_MASK (3<<0) - -#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6) -#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6) -#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6) -#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6) -#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6) - -#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8) -#define S3C2412_PWRCFG_NAND_NORST (1<<9) - -#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h deleted file mode 100644 index fb635251509..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h +++ /dev/null @@ -1,48 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2412_MEM -#define __ASM_ARM_REGS_S3C2412_MEM - -#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) - -#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) -#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) - -#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) -#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) -#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) -#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) - -#define S3C2412_REFRESH S3C2412_MEMREG(0x10) -#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) - -/* EBI control registers */ - -#define S3C2412_EBI_PR S3C2412_EBIREG(0x00) -#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04) - -/* SSMC control registers */ - -#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00) -#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00) -#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04) -#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08) -#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C) -#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10) -#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14) -#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18) -#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C) - -#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h deleted file mode 100644 index aa69dc79bc3..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_H -#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" - -#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) -#define S3C2412_SWRST_RESET (0x533C2412) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2412_H */ - diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h deleted file mode 100644 index 2f31b74974a..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2416 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2416_MEM -#define __ASM_ARM_REGS_S3C2416_MEM - -#ifndef S3C2416_MEMREG -#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -#define S3C2416_BANKCFG S3C2416_MEMREG(0x00) -#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04) -#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08) -#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C) - -#define S3C2416_REFRESH S3C2416_MEMREG(0x10) -#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14) - -#endif /* __ASM_ARM_REGS_S3C2416_MEM */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h deleted file mode 100644 index e443167efb8..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2416 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2416_H -#define __ASM_ARCH_REGS_S3C2416_H "s3c2416" - -#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44) -#define S3C2416_SWRST_RESET (0x533C2416) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2416_H */ - diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h deleted file mode 100644 index cbf2d8884e3..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h +++ /dev/null @@ -1,127 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 MMC/SDIO register definitions -*/ - -#ifndef __ASM_ARM_REGS_SDI -#define __ASM_ARM_REGS_SDI "regs-sdi.h" - -#define S3C2410_SDICON (0x00) -#define S3C2410_SDIPRE (0x04) -#define S3C2410_SDICMDARG (0x08) -#define S3C2410_SDICMDCON (0x0C) -#define S3C2410_SDICMDSTAT (0x10) -#define S3C2410_SDIRSP0 (0x14) -#define S3C2410_SDIRSP1 (0x18) -#define S3C2410_SDIRSP2 (0x1C) -#define S3C2410_SDIRSP3 (0x20) -#define S3C2410_SDITIMER (0x24) -#define S3C2410_SDIBSIZE (0x28) -#define S3C2410_SDIDCON (0x2C) -#define S3C2410_SDIDCNT (0x30) -#define S3C2410_SDIDSTA (0x34) -#define S3C2410_SDIFSTA (0x38) - -#define S3C2410_SDIDATA (0x3C) -#define S3C2410_SDIIMSK (0x40) - -#define S3C2440_SDIDATA (0x40) -#define S3C2440_SDIIMSK (0x3C) - -#define S3C2440_SDICON_SDRESET (1<<8) -#define S3C2440_SDICON_MMCCLOCK (1<<5) -#define S3C2410_SDICON_BYTEORDER (1<<4) -#define S3C2410_SDICON_SDIOIRQ (1<<3) -#define S3C2410_SDICON_RWAITEN (1<<2) -#define S3C2410_SDICON_FIFORESET (1<<1) -#define S3C2410_SDICON_CLOCKTYPE (1<<0) - -#define S3C2410_SDICMDCON_ABORT (1<<12) -#define S3C2410_SDICMDCON_WITHDATA (1<<11) -#define S3C2410_SDICMDCON_LONGRSP (1<<10) -#define S3C2410_SDICMDCON_WAITRSP (1<<9) -#define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -#define S3C2410_SDICMDCON_INDEX (0x3f) - -#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -#define S3C2410_SDICMDSTAT_XFERING (1<<8) -#define S3C2410_SDICMDSTAT_INDEX (0xff) - -#define S3C2440_SDIDCON_DS_BYTE (0<<22) -#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -#define S3C2440_SDIDCON_DS_WORD (2<<22) -#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -#define S3C2410_SDIDCON_WIDEBUS (1<<16) -#define S3C2410_SDIDCON_DMAEN (1<<15) -#define S3C2410_SDIDCON_STOP (1<<14) -#define S3C2440_SDIDCON_DATSTART (1<<14) -#define S3C2410_SDIDCON_DATMODE (3<<12) -#define S3C2410_SDIDCON_BLKNUM (0x7ff) - -/* constants for S3C2410_SDIDCON_DATMODE */ -#define S3C2410_SDIDCON_XFER_READY (0<<12) -#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) - -#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) - -#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -#define S3C2410_SDIDSTA_TXDATAON (1<<1) -#define S3C2410_SDIDSTA_RXDATAON (1<<0) - -#define S3C2440_SDIFSTA_FIFORESET (1<<16) -#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -#define S3C2410_SDIFSTA_TFDET (1<<13) -#define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TFHALF (1<<11) -#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -#define S3C2410_SDIFSTA_RFLAST (1<<9) -#define S3C2410_SDIFSTA_RFFULL (1<<8) -#define S3C2410_SDIFSTA_RFHALF (1<<7) -#define S3C2410_SDIFSTA_COUNTMASK (0x7f) - -#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -#define S3C2410_SDIIMSK_CMDSENT (1<<16) -#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -#define S3C2410_SDIIMSK_READWAIT (1<<13) -#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -#define S3C2410_SDIIMSK_DATACRC (1<<9) -#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) - -#endif /* __ASM_ARM_REGS_SDI */ diff --git a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h new file mode 100644 index 00000000000..4d5f5768f70 --- /dev/null +++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> + * + * Samsung RTC Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __RTC_CORE_H +#define __RTC_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +extern struct platform_device s3c_device_rtc; + +/* re-define device name depending on support. */ +static inline void s3c_rtc_setname(char *name) +{ + s3c_device_rtc.name = name; +} + +#endif /* __RTC_CORE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h new file mode 100644 index 00000000000..548ced42cbb --- /dev/null +++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H +#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__ + +#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) + +#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) +#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) + +#define S3C2412_REFRESH S3C2412_MEMREG(0x10) + +#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4) + +#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0) + +#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h deleted file mode 100644 index 544da41979d..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/tick.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/include/mach/tick.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - timer tick support - */ - -#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) - -static inline int s3c24xx_ostimer_pending(void) -{ - return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; -} diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h deleted file mode 100644 index fe9ca1ffd51..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/uncompress.h b/arch/arm/mach-s3c24xx/include/mach/uncompress.h deleted file mode 100644 index 8b283f847da..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/uncompress.h +++ /dev/null @@ -1,54 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/uncompress.h - * - * Copyright (c) 2003-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/regs-gpio.h> -#include <mach/map.h> - -/* working in physical space... */ -#undef S3C2410_GPIOREG -#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) - -#include <plat/uncompress.h> - -static inline int is_arm926(void) -{ - unsigned int cpuid; - - asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid)); - - return ((cpuid & 0xff0) == 0x260); -} - -static void arch_detect_cpu(void) -{ - unsigned int cpuid; - - cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); - cpuid &= S3C2410_GSTATUS1_IDMASK; - - if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442 || - cpuid == S3C2410_GSTATUS1_2416 || - cpuid == S3C2410_GSTATUS1_2450) { - fifo_mask = S3C2440_UFSTAT_TXMASK; - fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; - } else { - fifo_mask = S3C2410_UFSTAT_TXMASK; - fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT; - } -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h deleted file mode 100644 index e4119913d7c..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * VR1000 - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000CPLD_H -#define __ASM_ARCH_VR1000CPLD_H - -#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ - -#endif /* __ASM_ARCH_VR1000CPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h deleted file mode 100644 index 47add133b8e..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine VR1000 - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000IRQ_H -#define __ASM_ARCH_VR1000IRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT19 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_VR1000_SERIAL IRQ_EINT12 -#define IRQ_VR1000_DM9000A IRQ_EINT10 -#define IRQ_VR1000_DM9000N IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_VR1000IRQ_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h deleted file mode 100644 index 28376e56dd3..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h +++ /dev/null @@ -1,110 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine VR1000 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_VR1000MAP_H -#define __ASM_ARCH_VR1000MAP_H - -#include <mach/bast-map.h> - -#define VR1000_IOADDR(x) BAST_IOADDR(x) - -/* we put the CPLD registers next, to get them out of the way */ - -#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ -#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ -#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ -#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ -#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) - -#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) - -#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) - -/* 0xE0000000 contains the IO space that is split by speed and - * whether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers - * 0x02600000 to 0x02700000 1MB - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define VR1000_VA_MULTISPACE (0xE0000000) - -#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) -#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) -#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) -#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) -#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) -#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) -#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) -#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) -#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) - -/* physical offset addresses for the peripherals */ - -#define VR1000_PA_IDEPRI (0x02000000) -#define VR1000_PA_IDEPRIAUX (0x02800000) -#define VR1000_PA_IDESEC (0x03000000) -#define VR1000_PA_IDESECAUX (0x03800000) -#define VR1000_PA_DM9000 (0x05000000) - -#define VR1000_PA_SERIAL (0x11800000) -#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) - -/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ -#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) - -/* some configurations for the peripherals */ - -#define VR1000_DM9000_CS VR1000_VAM_CS4 - -#endif /* __ASM_ARCH_VR1000MAP_H */ diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c new file mode 100644 index 00000000000..4cd13ab6496 --- /dev/null +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c @@ -0,0 +1,478 @@ +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/cpufreq.h> +#include <linux/seq_file.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/cpu-freq-core.h> + +#include "regs-mem.h" + +#define print_ns(x) ((x) / 10), ((x) % 10) + +/** + * s3c2410_print_timing - print bank timing data for debug purposes + * @pfx: The prefix to put on the output + * @timings: The timing inforamtion to print. +*/ +static void s3c2410_print_timing(const char *pfx, + struct s3c_iotimings *timings) +{ + struct s3c2410_iobank_timing *bt; + int bank; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = timings->bank[bank].io_2410; + if (!bt) + continue; + + printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, " + "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank, + print_ns(bt->tacs), + print_ns(bt->tcos), + print_ns(bt->tacc), + print_ns(bt->tcoh), + print_ns(bt->tcah)); + } +} + +/** + * bank_reg - convert bank number to pointer to the control register. + * @bank: The IO bank number. + */ +static inline void __iomem *bank_reg(unsigned int bank) +{ + return S3C2410_BANKCON0 + (bank << 2); +} + +/** + * bank_is_io - test whether bank is used for IO + * @bankcon: The bank control register. + * + * This is a simplistic test to see if any BANKCON[x] is not an IO + * bank. It currently does not take into account whether BWSCON has + * an illegal width-setting in it, or if the pin connected to nCS[x] + * is actually being handled as a chip-select. + */ +static inline int bank_is_io(unsigned long bankcon) +{ + return !(bankcon & S3C2410_BANKCON_SDRAM); +} + +/** + * to_div - convert cycle time to divisor + * @cyc: The cycle time, in 10ths of nanoseconds. + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * + * Convert the given cycle time into the divisor to use to obtain it from + * HCLK. +*/ +static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns) +{ + if (cyc == 0) + return 0; + + return DIV_ROUND_UP(cyc, hclk_tns); +} + +/** + * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4 + * @cyc: The cycle time, in 10ths of nanoseconds. + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @v: Pointer to register to alter. + * @shift: The shift to get to the control bits. + * + * Calculate the divisor, and turn it into the correct control bits to + * set in the result, @v. + */ +static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns, + unsigned long *v, int shift) +{ + unsigned int div = to_div(cyc, hclk_tns); + unsigned long val; + + s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n", + __func__, cyc, hclk_tns, shift, div); + + switch (div) { + case 0: + val = 0; + break; + case 1: + val = 1; + break; + case 2: + val = 2; + break; + case 3: + case 4: + val = 3; + break; + default: + return -1; + } + + *v |= val << shift; + return 0; +} + +int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v) +{ + /* Currently no support for Tacp calculations. */ + return 0; +} + +/** + * calc_tacc - calculate divisor control for tacc. + * @cyc: The cycle time, in 10ths of nanoseconds. + * @nwait_en: IS nWAIT enabled for this bank. + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @v: Pointer to register to alter. + * + * Calculate the divisor control for tACC, taking into account whether + * the bank has nWAIT enabled. The result is used to modify the value + * pointed to by @v. +*/ +static int calc_tacc(unsigned int cyc, int nwait_en, + unsigned long hclk_tns, unsigned long *v) +{ + unsigned int div = to_div(cyc, hclk_tns); + unsigned long val; + + s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n", + __func__, cyc, nwait_en, hclk_tns, div); + + /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */ + if (nwait_en && div < 4) + div = 4; + + switch (div) { + case 0: + val = 0; + break; + + case 1: + case 2: + case 3: + case 4: + val = div - 1; + break; + + case 5: + case 6: + val = 4; + break; + + case 7: + case 8: + val = 5; + break; + + case 9: + case 10: + val = 6; + break; + + case 11: + case 12: + case 13: + case 14: + val = 7; + break; + + default: + return -1; + } + + *v |= val << 8; + return 0; +} + +/** + * s3c2410_calc_bank - calculate bank timing infromation + * @cfg: The configuration we need to calculate for. + * @bt: The bank timing information. + * + * Given the cycle timine for a bank @bt, calculate the new BANKCON + * setting for the @cfg timing. This updates the timing information + * ready for the cpu frequency change. + */ +static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg, + struct s3c2410_iobank_timing *bt) +{ + unsigned long hclk = cfg->freq.hclk_tns; + unsigned long res; + int ret; + + res = bt->bankcon; + res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16); + + /* tacp: 2,3,4,5 */ + /* tcah: 0,1,2,4 */ + /* tcoh: 0,1,2,4 */ + /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */ + /* tcos: 0,1,2,4 */ + /* tacs: 0,1,2,4 */ + + ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT); + ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT); + ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT); + ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT); + + if (ret) + return -EINVAL; + + ret |= calc_tacp(bt->tacp, hclk, &res); + ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res); + + if (ret) + return -EINVAL; + + bt->bankcon = res; + return 0; +} + +static unsigned int tacc_tab[] = { + [0] = 1, + [1] = 2, + [2] = 3, + [3] = 4, + [4] = 6, + [5] = 9, + [6] = 10, + [7] = 14, +}; + +/** + * get_tacc - turn tACC value into cycle time + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @val: The bank timing register value, shifed down. + */ +static unsigned int get_tacc(unsigned long hclk_tns, + unsigned long val) +{ + val &= 7; + return hclk_tns * tacc_tab[val]; +} + +/** + * get_0124 - turn 0/1/2/4 divider into cycle time + * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. + * @val: The bank timing register value, shifed down. + */ +static unsigned int get_0124(unsigned long hclk_tns, + unsigned long val) +{ + val &= 3; + return hclk_tns * ((val == 3) ? 4 : val); +} + +/** + * s3c2410_iotiming_getbank - turn BANKCON into cycle time information + * @cfg: The frequency configuration + * @bt: The bank timing to fill in (uses cached BANKCON) + * + * Given the BANKCON setting in @bt and the current frequency settings + * in @cfg, update the cycle timing information. + */ +void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg, + struct s3c2410_iobank_timing *bt) +{ + unsigned long bankcon = bt->bankcon; + unsigned long hclk = cfg->freq.hclk_tns; + + bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT); + bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT); + bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT); + bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT); + bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT); +} + +/** + * s3c2410_iotiming_debugfs - debugfs show io bank timing information + * @seq: The seq_file to write output to using seq_printf(). + * @cfg: The current configuration. + * @iob: The IO bank information to decode. + */ +void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob) +{ + struct s3c2410_iobank_timing *bt = iob->io_2410; + unsigned long bankcon = bt->bankcon; + unsigned long hclk = cfg->freq.hclk_tns; + unsigned int tacs; + unsigned int tcos; + unsigned int tacc; + unsigned int tcoh; + unsigned int tcah; + + seq_printf(seq, "BANKCON=0x%08lx\n", bankcon); + + tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT); + tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT); + tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT); + tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT); + tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT); + + seq_printf(seq, + "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n", + print_ns(bt->tacs), + print_ns(bt->tcos), + print_ns(bt->tacc), + print_ns(bt->tcoh), + print_ns(bt->tcah)); + + seq_printf(seq, + "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n", + print_ns(tacs), + print_ns(tcos), + print_ns(tacc), + print_ns(tcoh), + print_ns(tcah)); +} + +/** + * s3c2410_iotiming_calc - Calculate bank timing for frequency change. + * @cfg: The frequency configuration + * @iot: The IO timing information to fill out. + * + * Calculate the new values for the banks in @iot based on the new + * frequency information in @cfg. This is then used by s3c2410_iotiming_set() + * to update the timing when necessary. + */ +int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2410_iobank_timing *bt; + unsigned long bankcon; + int bank; + int ret; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bankcon = __raw_readl(bank_reg(bank)); + bt = iot->bank[bank].io_2410; + + if (!bt) + continue; + + bt->bankcon = bankcon; + + ret = s3c2410_calc_bank(cfg, bt); + if (ret) { + printk(KERN_ERR "%s: cannot calculate bank %d io\n", + __func__, bank); + goto err; + } + + s3c_freq_iodbg("%s: bank %d: con=%08lx\n", + __func__, bank, bt->bankcon); + } + + return 0; + err: + return ret; +} + +/** + * s3c2410_iotiming_set - set the IO timings from the given setup. + * @cfg: The frequency configuration + * @iot: The IO timing information to use. + * + * Set all the currently used IO bank timing information generated + * by s3c2410_iotiming_calc() once the core has validated that all + * the new values are within permitted bounds. + */ +void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2410_iobank_timing *bt; + int bank; + + /* set the io timings from the specifier */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2410; + if (!bt) + continue; + + __raw_writel(bt->bankcon, bank_reg(bank)); + } +} + +/** + * s3c2410_iotiming_get - Get the timing information from current registers. + * @cfg: The frequency configuration + * @timings: The IO timing information to fill out. + * + * Calculate the @timings timing information from the current frequency + * information in @cfg, and the new frequency configur + * through all the IO banks, reading the state and then updating @iot + * as necessary. + * + * This is used at the moment on initialisation to get the current + * configuration so that boards do not have to carry their own setup + * if the timings are correct on initialisation. + */ + +int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings) +{ + struct s3c2410_iobank_timing *bt; + unsigned long bankcon; + unsigned long bwscon; + int bank; + + bwscon = __raw_readl(S3C2410_BWSCON); + + /* look through all banks to see what is currently set. */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + bankcon = __raw_readl(bank_reg(bank)); + + if (!bank_is_io(bankcon)) + continue; + + s3c_freq_iodbg("%s: bank %d: con %08lx\n", + __func__, bank, bankcon); + + bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL); + if (!bt) { + printk(KERN_ERR "%s: no memory for bank\n", __func__); + return -ENOMEM; + } + + /* find out in nWait is enabled for bank. */ + + if (bank != 0) { + unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank); + if (tmp & S3C2410_BWSCON_WS) + bt->nwait_en = 1; + } + + timings->bank[bank].io_2410 = bt; + bt->bankcon = bankcon; + + s3c2410_iotiming_getbank(cfg, bt); + } + + s3c2410_print_timing("get", timings); + return 0; +} diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c new file mode 100644 index 00000000000..bd064c05c47 --- /dev/null +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c @@ -0,0 +1,285 @@ +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412/S3C2443 (PL093 based) IO timing support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/seq_file.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/slab.h> + +#include <linux/amba/pl093.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> +#include <plat/clock.h> + +#include <mach/s3c2412.h> + +#define print_ns(x) ((x) / 10), ((x) % 10) + +/** + * s3c2412_print_timing - print timing infromation via printk. + * @pfx: The prefix to print each line with. + * @iot: The IO timing information + */ +static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot) +{ + struct s3c2412_iobank_timing *bt; + unsigned int bank; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2412; + if (!bt) + continue; + + printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d" + "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank, + print_ns(bt->idcy), + print_ns(bt->wstrd), + print_ns(bt->wstwr), + print_ns(bt->wstoen), + print_ns(bt->wstwen), + print_ns(bt->wstbrd)); + } +} + +/** + * to_div - turn a cycle length into a divisor setting. + * @cyc_tns: The cycle time in 10ths of nanoseconds. + * @clk_tns: The clock period in 10ths of nanoseconds. + */ +static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns) +{ + return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0; +} + +/** + * calc_timing - calculate timing divisor value and check in range. + * @hwtm: The hardware timing in 10ths of nanoseconds. + * @clk_tns: The clock period in 10ths of nanoseconds. + * @err: Pointer to err variable to update in event of failure. + */ +static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns, + unsigned int *err) +{ + unsigned int ret = to_div(hwtm, clk_tns); + + if (ret > 0xf) + *err = -EINVAL; + + return ret; +} + +/** + * s3c2412_calc_bank - calculate the bank divisor settings. + * @cfg: The current frequency configuration. + * @bt: The bank timing. + */ +static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg, + struct s3c2412_iobank_timing *bt) +{ + unsigned int hclk = cfg->freq.hclk_tns; + int err = 0; + + bt->smbidcyr = calc_timing(bt->idcy, hclk, &err); + bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err); + bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err); + bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err); + bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err); + bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err); + + return err; +} + +/** + * s3c2412_iotiming_debugfs - debugfs show io bank timing information + * @seq: The seq_file to write output to using seq_printf(). + * @cfg: The current configuration. + * @iob: The IO bank information to decode. +*/ +void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob) +{ + struct s3c2412_iobank_timing *bt = iob->io_2412; + + seq_printf(seq, + "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d" + "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", + print_ns(bt->idcy), + print_ns(bt->wstrd), + print_ns(bt->wstwr), + print_ns(bt->wstoen), + print_ns(bt->wstwen), + print_ns(bt->wstbrd)); +} + +/** + * s3c2412_iotiming_calc - calculate all the bank divisor settings. + * @cfg: The current frequency configuration. + * @iot: The bank timing information. + * + * Calculate the timing information for all the banks that are + * configured as IO, using s3c2412_calc_bank(). + */ +int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2412_iobank_timing *bt; + int bank; + int ret; + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2412; + if (!bt) + continue; + + ret = s3c2412_calc_bank(cfg, bt); + if (ret) { + printk(KERN_ERR "%s: cannot calculate bank %d io\n", + __func__, bank); + goto err; + } + } + + return 0; + err: + return ret; +} + +/** + * s3c2412_iotiming_set - set the timing information + * @cfg: The current frequency configuration. + * @iot: The bank timing information. + * + * Set the IO bank information from the details calculated earlier from + * calling s3c2412_iotiming_calc(). + */ +void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot) +{ + struct s3c2412_iobank_timing *bt; + void __iomem *regs; + int bank; + + /* set the io timings from the specifier */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + bt = iot->bank[bank].io_2412; + if (!bt) + continue; + + regs = S3C2412_SSMC_BANK(bank); + + __raw_writel(bt->smbidcyr, regs + SMBIDCYR); + __raw_writel(bt->smbwstrd, regs + SMBWSTRDR); + __raw_writel(bt->smbwstwr, regs + SMBWSTWRR); + __raw_writel(bt->smbwstoen, regs + SMBWSTOENR); + __raw_writel(bt->smbwstwen, regs + SMBWSTWENR); + __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR); + } +} + +static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg) +{ + return (reg & 0xf) * clock; +} + +static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg, + struct s3c2412_iobank_timing *bt, + unsigned int bank) +{ + unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */ + void __iomem *regs = S3C2412_SSMC_BANK(bank); + + bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR)); + bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR)); + bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR)); + bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR)); + bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR)); +} + +/** + * bank_is_io - return true if bank is (possibly) IO. + * @bank: The bank number. + * @bankcfg: The value of S3C2412_EBI_BANKCFG. + */ +static inline bool bank_is_io(unsigned int bank, u32 bankcfg) +{ + if (bank < 2) + return true; + + return !(bankcfg & (1 << bank)); +} + +int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings) +{ + struct s3c2412_iobank_timing *bt; + u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG); + unsigned int bank; + + /* look through all banks to see what is currently set. */ + + for (bank = 0; bank < MAX_BANKS; bank++) { + if (!bank_is_io(bank, bankcfg)) + continue; + + bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL); + if (!bt) { + printk(KERN_ERR "%s: no memory for bank\n", __func__); + return -ENOMEM; + } + + timings->bank[bank].io_2412 = bt; + s3c2412_iotiming_getbank(cfg, bt, bank); + } + + s3c2412_print_timing("get", timings); + return 0; +} + +/* this is in here as it is so small, it doesn't currently warrant a file + * to itself. We expect that any s3c24xx needing this is going to also + * need the iotiming support. + */ +void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + struct s3c_cpufreq_board *board = cfg->board; + u32 refresh; + + WARN_ON(board == NULL); + + /* Reduce both the refresh time (in ns) and the frequency (in MHz) + * down to ensure that we do not overflow 32 bit numbers. + * + * This should work for HCLK up to 133MHz and refresh period up + * to 30usec. + */ + + refresh = (cfg->freq.hclk / 100) * (board->refresh / 10); + refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */ + refresh &= ((1 << 16) - 1); + + s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh); + + __raw_writel(refresh, S3C2412_REFRESH); +} diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c index 0efb2e2848c..b91341ef2b2 100644 --- a/arch/arm/mach-s3c24xx/irq-pm.c +++ b/arch/arm/mach-s3c24xx/irq-pm.c @@ -15,10 +15,16 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/syscore_ops.h> +#include <linux/io.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/irq.h> +#include <plat/map-base.h> +#include <plat/map-s3c.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> #include <asm/irq.h> @@ -29,18 +35,18 @@ * set bit to 1 in allow bitfield to enable the wakeup settings on it */ -unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; +unsigned long s3c_irqwake_intallow = 1L << 30 | 0xfL; unsigned long s3c_irqwake_eintallow = 0x0000fff0L; int s3c_irq_wake(struct irq_data *data, unsigned int state) { - unsigned long irqbit = 1 << (data->irq - IRQ_EINT0); + unsigned long irqbit = 1 << data->hwirq; if (!(s3c_irqwake_intallow & irqbit)) return -ENOENT; - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", data->irq); + pr_info("wake %s for hwirq %lu\n", + state ? "enabled" : "disabled", data->hwirq); if (!state) s3c_irqwake_intmask |= irqbit; @@ -64,7 +70,7 @@ static unsigned long save_extint[3]; static unsigned long save_eintflt[4]; static unsigned long save_eintmask; -int s3c24xx_irq_suspend(void) +static int s3c24xx_irq_suspend(void) { unsigned int i; @@ -80,7 +86,7 @@ int s3c24xx_irq_suspend(void) return 0; } -void s3c24xx_irq_resume(void) +static void s3c24xx_irq_resume(void) { unsigned int i; @@ -93,3 +99,31 @@ void s3c24xx_irq_resume(void) s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); __raw_writel(save_eintmask, S3C24XX_EINTMASK); } + +struct syscore_ops s3c24xx_irq_syscore_ops = { + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, +}; + +#ifdef CONFIG_CPU_S3C2416 +static struct sleep_save s3c2416_irq_save[] = { + SAVE_ITEM(S3C2416_INTMSK2), +}; + +static int s3c2416_irq_suspend(void) +{ + s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save)); + + return 0; +} + +static void s3c2416_irq_resume(void) +{ + s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save)); +} + +struct syscore_ops s3c2416_irq_syscore_ops = { + .suspend = s3c2416_irq_suspend, + .resume = s3c2416_irq_resume, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c deleted file mode 100644 index e65619ddbcc..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2412.c +++ /dev/null @@ -1,214 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> -#include <mach/regs-power.h> - -#include <plat/cpu.h> -#include <plat/irq.h> -#include <plat/pm.h> - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) -#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) - -/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by - * having them turn up in both the INT* and the EINT* registers. Whilst - * both show the status, they both now need to be acked when the IRQs - * go off. -*/ - -static void -s3c2412_irq_mask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask | bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); -} - -static inline void -s3c2412_irq_ack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c2412_irq_maskack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static void -s3c2412_irq_unmask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask & ~bitval, S3C2412_EINTMASK); - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask & ~bitval, S3C2410_INTMSK); -} - -static struct irq_chip s3c2412_irq_eint0t4 = { - .irq_ack = s3c2412_irq_ack, - .irq_mask = s3c2412_irq_mask, - .irq_unmask = s3c2412_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext_type, -}; - -#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0))) - -/* CF and SDI sub interrupts */ - -static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - - if (subsrc & INTBIT(IRQ_S3C2412_SDI)) - generic_handle_irq(IRQ_S3C2412_SDI); - - if (subsrc & INTBIT(IRQ_S3C2412_CF)) - generic_handle_irq(IRQ_S3C2412_CF); -} - -#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0)) -#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF) - -static void s3c2412_irq_cfsdi_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static struct irq_chip s3c2412_irq_cfsdi = { - .name = "s3c2412-cfsdi", - .irq_ack = s3c2412_irq_cfsdi_ack, - .irq_mask = s3c2412_irq_cfsdi_mask, - .irq_unmask = s3c2412_irq_cfsdi_unmask, -}; - -static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) -{ - unsigned long pwrcfg; - - pwrcfg = __raw_readl(S3C2412_PWRCFG); - if (state) - pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; - else - pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; - __raw_writel(pwrcfg, S3C2412_PWRCFG); - - return s3c_irq_chip.irq_set_wake(data, state); -} - -static struct irq_chip s3c2412_irq_rtc_chip; - -static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add demux support for CF/SDI */ - - irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); - - for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* change RTC IRQ's set wake method */ - - s3c2412_irq_rtc_chip = s3c_irq_chip; - s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake; - - irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); - - return 0; -} - -static struct subsys_interface s3c2412_irq_interface = { - .name = "s3c2412_irq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_irq_add, -}; - -static int s3c2412_irq_init(void) -{ - return subsys_interface_register(&s3c2412_irq_interface); -} - -arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c deleted file mode 100644 index ff141b0af26..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2416.c +++ /dev/null @@ -1,348 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/irq.c - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) - -static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len) -{ - unsigned int subsrc, submsk; - unsigned int end; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= (irq - S3C2410_IRQSUB(0)); - subsrc &= (1 << len)-1; - - end = len + irq; - - for (; irq < end && subsrc; irq++) { - if (subsrc & 1) - generic_handle_irq(irq); - - subsrc >>= 1; - } -} - -/* WDT/AC97 sub interrupts */ - -static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_WDT, 4); -} - -#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) -#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) - -static void s3c2416_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static void s3c2416_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97); -} - -static void s3c2416_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static struct irq_chip s3c2416_irq_wdtac97 = { - .irq_mask = s3c2416_irq_wdtac97_mask, - .irq_unmask = s3c2416_irq_wdtac97_unmask, - .irq_ack = s3c2416_irq_wdtac97_ack, -}; - -/* LCD sub interrupts */ - -static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4); -} - -#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) -#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) - -static void s3c2416_irq_lcd_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static void s3c2416_irq_lcd_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_LCD); -} - -static void s3c2416_irq_lcd_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static struct irq_chip s3c2416_irq_lcd = { - .irq_mask = s3c2416_irq_lcd_mask, - .irq_unmask = s3c2416_irq_lcd_unmask, - .irq_ack = s3c2416_irq_lcd_ack, -}; - -/* DMA sub interrupts */ - -static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6); -} - -#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) -#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) - - -static void s3c2416_irq_dma_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static void s3c2416_irq_dma_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_DMA); -} - -static void s3c2416_irq_dma_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static struct irq_chip s3c2416_irq_dma = { - .irq_mask = s3c2416_irq_dma_mask, - .irq_unmask = s3c2416_irq_dma_unmask, - .irq_ack = s3c2416_irq_dma_ack, -}; - -/* UART3 sub interrupts */ - -static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_RX3, 3); -} - -#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - -static void s3c2416_irq_uart3_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static void s3c2416_irq_uart3_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_UART3); -} - -static void s3c2416_irq_uart3_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static struct irq_chip s3c2416_irq_uart3 = { - .irq_mask = s3c2416_irq_uart3_mask, - .irq_unmask = s3c2416_irq_uart3_unmask, - .irq_ack = s3c2416_irq_uart3_ack, -}; - -/* second interrupt register */ - -static inline void s3c2416_irq_ack_second(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D); - - __raw_writel(bitval, S3C2416_SRCPND2); - __raw_writel(bitval, S3C2416_INTPND2); -} - -static void s3c2416_irq_mask_second(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D); - unsigned long mask; - - mask = __raw_readl(S3C2416_INTMSK2); - mask |= bitval; - __raw_writel(mask, S3C2416_INTMSK2); -} - -static void s3c2416_irq_unmask_second(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D); - unsigned long mask; - - mask = __raw_readl(S3C2416_INTMSK2); - mask &= ~bitval; - __raw_writel(mask, S3C2416_INTMSK2); -} - -struct irq_chip s3c2416_irq_second = { - .irq_ack = s3c2416_irq_ack_second, - .irq_mask = s3c2416_irq_mask_second, - .irq_unmask = s3c2416_irq_unmask_second, -}; - - -/* IRQ initialisation code */ - -static int s3c2416_add_sub(unsigned int base, - void (*demux)(unsigned int, - struct irq_desc *), - struct irq_chip *chip, - unsigned int start, unsigned int end) -{ - unsigned int irqno; - - irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq); - irq_set_chained_handler(base, demux); - - for (irqno = start; irqno <= end; irqno++) { - irq_set_chip_and_handler(irqno, chip, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static void s3c2416_irq_add_second(void) -{ - unsigned long pend; - unsigned long last; - int irqno; - int i; - - /* first, clear all interrupts pending... */ - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2416_INTPND2); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C2416_SRCPND2); - __raw_writel(pend, S3C2416_INTPND2); - printk(KERN_INFO "irq: clearing pending status %08x\n", - (int)pend); - last = pend; - } - - for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) { - switch (irqno) { - case IRQ_S3C2416_RESERVED2: - case IRQ_S3C2416_RESERVED3: - /* no IRQ here */ - break; - default: - irq_set_chip_and_handler(irqno, &s3c2416_irq_second, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - } -} - -static int s3c2416_irq_add(struct device *dev, - struct subsys_interface *sif) -{ - printk(KERN_INFO "S3C2416: IRQ Support\n"); - - s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd, - IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4); - - s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma, - &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); - - s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3, - &s3c2416_irq_uart3, - IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); - - s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97, - &s3c2416_irq_wdtac97, - IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); - - s3c2416_irq_add_second(); - - return 0; -} - -static struct subsys_interface s3c2416_irq_interface = { - .name = "s3c2416_irq", - .subsys = &s3c2416_subsys, - .add_dev = s3c2416_irq_add, -}; - -static int __init s3c2416_irq_init(void) -{ - return subsys_interface_register(&s3c2416_irq_interface); -} - -arch_initcall(s3c2416_irq_init); - -#ifdef CONFIG_PM -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2416_INTMSK2), -}; - -int s3c2416_irq_suspend(void) -{ - s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - - return 0; -} - -void s3c2416_irq_resume(void) -{ - s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); -} - -struct syscore_ops s3c2416_irq_syscore_ops = { - .suspend = s3c2416_irq_suspend, - .resume = s3c2416_irq_resume, -}; -#endif diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c deleted file mode 100644 index 4a18cde439c..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2440.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_WDT); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_AC97); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); -} - -static void -s3c_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .irq_mask = s3c_irq_wdtac97_mask, - .irq_unmask = s3c_irq_wdtac97_unmask, - .irq_ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c deleted file mode 100644 index 5e69109c092..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2443.c +++ /dev/null @@ -1,281 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/irq.c - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) - -static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len) -{ - unsigned int subsrc, submsk; - unsigned int end; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= (irq - S3C2410_IRQSUB(0)); - subsrc &= (1 << len)-1; - - end = len + irq; - - for (; irq < end && subsrc; irq++) { - if (subsrc & 1) - generic_handle_irq(irq); - - subsrc >>= 1; - } -} - -/* WDT/AC97 sub interrupts */ - -static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_WDT, 4); -} - -#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) -#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) - -static void s3c2443_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static void s3c2443_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97); -} - -static void s3c2443_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static struct irq_chip s3c2443_irq_wdtac97 = { - .irq_mask = s3c2443_irq_wdtac97_mask, - .irq_unmask = s3c2443_irq_wdtac97_unmask, - .irq_ack = s3c2443_irq_wdtac97_ack, -}; - -/* LCD sub interrupts */ - -static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4); -} - -#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) -#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) - -static void s3c2443_irq_lcd_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static void s3c2443_irq_lcd_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_LCD); -} - -static void s3c2443_irq_lcd_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static struct irq_chip s3c2443_irq_lcd = { - .irq_mask = s3c2443_irq_lcd_mask, - .irq_unmask = s3c2443_irq_lcd_unmask, - .irq_ack = s3c2443_irq_lcd_ack, -}; - -/* DMA sub interrupts */ - -static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6); -} - -#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) -#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) - -static void s3c2443_irq_dma_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static void s3c2443_irq_dma_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_DMA); -} - -static void s3c2443_irq_dma_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static struct irq_chip s3c2443_irq_dma = { - .irq_mask = s3c2443_irq_dma_mask, - .irq_unmask = s3c2443_irq_dma_unmask, - .irq_ack = s3c2443_irq_dma_ack, -}; - -/* UART3 sub interrupts */ - -static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_RX3, 3); -} - -#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - -static void s3c2443_irq_uart3_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static void s3c2443_irq_uart3_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_UART3); -} - -static void s3c2443_irq_uart3_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static struct irq_chip s3c2443_irq_uart3 = { - .irq_mask = s3c2443_irq_uart3_mask, - .irq_unmask = s3c2443_irq_uart3_unmask, - .irq_ack = s3c2443_irq_uart3_ack, -}; - -/* CAM sub interrupts */ - -static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4); -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) -#define SUBMSK_CAM INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P) - -static void s3c2443_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM); -} - -static void s3c2443_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void s3c2443_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM); -} - -static struct irq_chip s3c2443_irq_cam = { - .irq_mask = s3c2443_irq_cam_mask, - .irq_unmask = s3c2443_irq_cam_unmask, - .irq_ack = s3c2443_irq_cam_ack, -}; - -/* IRQ initialisation code */ - -static int s3c2443_add_sub(unsigned int base, - void (*demux)(unsigned int, - struct irq_desc *), - struct irq_chip *chip, - unsigned int start, unsigned int end) -{ - unsigned int irqno; - - irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq); - irq_set_chained_handler(base, demux); - - for (irqno = start; irqno <= end; irqno++) { - irq_set_chip_and_handler(irqno, chip, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static int s3c2443_irq_add(struct device *dev, - struct subsys_interface *sif) -{ - printk("S3C2443: IRQ Support\n"); - - s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam, - IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P); - - s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd, - IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4); - - s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma, - &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); - - s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3, - &s3c2443_irq_uart3, - IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); - - s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97, - &s3c2443_irq_wdtac97, - IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); - - return 0; -} - -static struct subsys_interface s3c2443_irq_interface = { - .name = "s3c2443_irq", - .subsys = &s3c2443_subsys, - .add_dev = s3c2443_irq_add, -}; - -static int __init s3c2443_irq_init(void) -{ - return subsys_interface_register(&s3c2443_irq_interface); -} - -arch_initcall(s3c2443_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c deleted file mode 100644 index 5fe8e58d3af..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c244x.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); -} - -static void -s3c_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); -} - -static struct irq_chip s3c_irq_cam = { - .irq_mask = s3c_irq_cam_mask, - .irq_unmask = s3c_irq_cam_unmask, - .irq_ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, - handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_cam, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - -static struct subsys_interface s3c2442_irq_interface = { - .name = "s3c2442_irq", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_irq_add, -}; - - -static int s3c2442_irq_init(void) -{ - return subsys_interface_register(&s3c2442_irq_interface); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index f4ad99c1e47..5157e250dd1 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -37,6 +37,7 @@ #include <linux/platform_device.h> #include <linux/proc_fs.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -49,9 +50,9 @@ #include <asm/mach-types.h> #include <mach/fb.h> -#include <plat/regs-serial.h> #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> @@ -63,6 +64,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> + #include "common.h" static struct resource amlm5900_nor_resource = @@ -158,8 +161,14 @@ static struct platform_device *amlm5900_devices[] __initdata = { static void __init amlm5900_map_io(void) { s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init amlm5900_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } #ifdef CONFIG_FB_S3C2410 @@ -235,8 +244,8 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .timer = &s3c24xx_timer, + .init_time = amlm5900_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 1ee8c463874..e053581cab0 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/i2c.h> @@ -28,18 +29,13 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/anubis-map.h> -#include <mach/anubis-irq.h> -#include <mach/anubis-cpld.h> - #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -50,13 +46,14 @@ #include <net/ax88796.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/samsung-time.h> -#include "simtec.h" +#include "anubis.h" #include "common.h" +#include "simtec.h" #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" @@ -237,7 +234,7 @@ static struct pata_platform_info anubis_ide_platdata = { static struct resource anubis_ide0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32), [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32), - [3] = DEFINE_RES_IRQ(IRQ_IDE0), + [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), }; static struct platform_device anubis_device_ide0 = { @@ -254,7 +251,7 @@ static struct platform_device anubis_device_ide0 = { static struct resource anubis_ide1_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32), [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32), - [2] = DEFINE_RES_IRQ(IRQ_IDE0), + [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), }; static struct platform_device anubis_device_ide1 = { @@ -279,7 +276,7 @@ static struct ax_plat_data anubis_asix_platdata = { static struct resource anubis_asix_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20), - [1] = DEFINE_RES_IRQ(IRQ_ASIX), + [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX), }; static struct platform_device anubis_device_asix = { @@ -354,6 +351,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, @@ -366,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - /* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[] __initdata = { @@ -396,24 +386,9 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { static void __init anubis_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -429,6 +404,12 @@ static void __init anubis_map_io(void) } } +static void __init anubis_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); @@ -447,7 +428,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_irq = s3c2440_init_irq, + .init_time = anubis_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 00381fe5de3..9db768f448a 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -14,12 +14,14 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> #include <linux/platform_device.h> @@ -32,10 +34,9 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -44,10 +45,10 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> +#include <plat/samsung-time.h> #include "common.h" @@ -190,8 +191,14 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init at2440evb_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); } static void __init at2440evb_init(void) @@ -209,7 +216,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_irq = s3c2440_init_irq, + .init_time = at2440evb_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 6a30ce7e4aa..f9112b801a3 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -19,53 +19,47 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/dm9000.h> #include <linux/ata_platform.h> #include <linux/i2c.h> #include <linux/io.h> +#include <linux/serial_8250.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <linux/platform_data/hwmon-s3c.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <net/ax88796.h> +#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> - -#include <mach/bast-map.h> -#include <mach/bast-irq.h> -#include <mach/bast-cpld.h> - -#include <mach/hardware.h> -#include <asm/irq.h> #include <asm/mach-types.h> -//#include <asm/debug-ll.h> -#include <plat/regs-serial.h> +#include <mach/fb.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> -#include <linux/platform_data/hwmon-s3c.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <mach/fb.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <linux/serial_8250.h> - -#include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> +#include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/samsung-time.h> -#include "simtec.h" +#include "bast.h" #include "common.h" +#include "simtec.h" #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" @@ -312,7 +306,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = { static struct resource bast_dm9k_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4), [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40), - [2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \ + [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \ | IORESOURCE_IRQ_HIGHLEVEL), }; @@ -343,7 +337,7 @@ static struct platform_device bast_device_dm9k = { static struct plat_serial8250_port bast_sio_data[] = { [0] = { .mapbase = SERIAL_BASE + 0x2f8, - .irq = IRQ_PCSERIAL1, + .irq = BAST_IRQ_PCSERIAL1, .flags = SERIAL_FLAGS, .iotype = UPIO_MEM, .regshift = 0, @@ -351,7 +345,7 @@ static struct plat_serial8250_port bast_sio_data[] = { }, [1] = { .mapbase = SERIAL_BASE + 0x3f8, - .irq = IRQ_PCSERIAL2, + .irq = BAST_IRQ_PCSERIAL2, .flags = SERIAL_FLAGS, .iotype = UPIO_MEM, .regshift = 0, @@ -390,7 +384,7 @@ static struct ax_plat_data bast_asix_platdata = { static struct resource bast_asix_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20), [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1), - [2] = DEFINE_RES_IRQ(IRQ_ASIX), + [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX), }; static struct platform_device bast_device_asix = { @@ -528,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -542,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata bast_cpufreq = { .refresh = 7800, /* 7.8usec */ .auto_io = 1, @@ -563,26 +550,17 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { static void __init bast_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init bast_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } static void __init bast_init(void) @@ -610,8 +588,8 @@ MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .timer = &s3c24xx_timer, + .init_time = bast_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 973b87ca87f..fc3a08d0cb3 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-s3c2442/mach-gta02.c - * * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. * * Copyright (C) 2006-2009 by Openmoko, Inc. @@ -23,7 +21,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * */ #include <linux/kernel.h> @@ -34,62 +31,61 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/spi/spi.h> -#include <linux/spi/s3c24xx.h> +#include <linux/serial_s3c.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/i2c.h> #include <linux/mmc/host.h> +#include <linux/mfd/pcf50633/adc.h> +#include <linux/mfd/pcf50633/backlight.h> +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/gpio.h> +#include <linux/mfd/pcf50633/mbc.h> +#include <linux/mfd/pcf50633/pmic.h> + #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/io.h> -#include <linux/i2c.h> #include <linux/regulator/machine.h> -#include <linux/mfd/pcf50633/core.h> -#include <linux/mfd/pcf50633/mbc.h> -#include <linux/mfd/pcf50633/adc.h> -#include <linux/mfd/pcf50633/gpio.h> -#include <linux/mfd/pcf50633/pmic.h> -#include <linux/mfd/pcf50633/backlight.h> - -#include <linux/input.h> -#include <linux/gpio_keys.h> +#include <linux/spi/spi.h> +#include <linux/spi/s3c24xx.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/irq.h> -#include <asm/mach-types.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/usb-ohci-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> #include <mach/fb.h> - -#include <linux/platform_data/usb-ohci-s3c2410.h> -#include <mach/regs-mem.h> #include <mach/hardware.h> +#include <mach/regs-gpio.h> +#include <mach/regs-irq.h> +#include <mach/gpio-samsung.h> -#include <mach/gta02.h> - -#include <plat/regs-serial.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/devs.h> #include <plat/cpu.h> -#include <plat/pm.h> -#include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/touchscreen-s3c2410.h> +#include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" +#include "gta02.h" static struct pcf50633 *gta02_pcf; @@ -200,7 +196,7 @@ static void gta02_charger_worker(struct work_struct *work) * If the PCF50633 ADC is disabled we fallback to a * 100mA limit for safety. */ - pcf50633_mbc_usb_curlim_set(pcf, 100); + pcf50633_mbc_usb_curlim_set(gta02_pcf, 100); #endif } @@ -505,8 +501,8 @@ static struct platform_device gta02_buttons_device = { static void __init gta02_map_io(void) { s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -588,13 +584,18 @@ static void __init gta02_machine_init(void) regulator_has_full_constraints(); } +static void __init gta02_init_time(void) +{ + s3c2442_init_clocks(12000000); + samsung_timer_init(); +} MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ .atag_offset = 0x100, .map_io = gta02_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .timer = &s3c24xx_timer, + .init_time = gta02_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index b23dd1b106e..fbf5487ae5d 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-h1940.c - * +/* * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -20,6 +19,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -37,40 +37,35 @@ #include <linux/mmc/host.h> #include <linux/export.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <mach/regs-lcd.h> -#include <mach/regs-clock.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mmc-s3cmci.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> -#include <mach/regs-gpio.h> -#include <mach/gpio-fns.h> -#include <mach/gpio-nrs.h> +#include <sound/uda1380.h> -#include <mach/h1940.h> -#include <mach/h1940-latch.h> #include <mach/fb.h> -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/i2c-s3c2410.h> +#include <mach/hardware.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> -#include <plat/gpio-cfg.h> -#include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/gpio-cfg.h> #include <plat/pll.h> #include <plat/pm.h> -#include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/touchscreen-s3c2410.h> - -#include <sound/uda1380.h> +#include <plat/samsung-time.h> #include "common.h" +#include "h1940.h" #define H1940_LATCH ((void __force __iomem *)0xF8000000) @@ -509,6 +504,7 @@ static struct platform_pwm_backlight_data backlight_data = { .dft_brightness = 50, /* tcnt = 0x31 */ .pwm_period_ns = 36296, + .enable_gpio = -1, .init = h1940_backlight_init, .notify = h1940_backlight_notify, .exit = h1940_backlight_exit, @@ -517,7 +513,7 @@ static struct platform_pwm_backlight_data backlight_data = { static struct platform_device h1940_backlight = { .name = "pwm-backlight", .dev = { - .parent = &s3c_device_timer[0].dev, + .parent = &samsung_device_pwm.dev, .platform_data = &backlight_data, }, .id = -1, @@ -637,7 +633,7 @@ static struct platform_device *h1940_devices[] __initdata = { &h1940_device_bluetooth, &s3c_device_sdi, &s3c_device_rtc, - &s3c_device_timer[0], + &samsung_device_pwm, &h1940_backlight, &h1940_lcd_powerdev, &s3c_device_adc, @@ -649,8 +645,8 @@ static struct platform_device *h1940_devices[] __initdata = { static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -664,6 +660,12 @@ static void __init h1940_map_io(void) WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } +static void __init h1940_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init h1940_reserve(void) { @@ -671,11 +673,6 @@ static void __init h1940_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init h1940_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init h1940_init(void) { u32 tmp; @@ -744,8 +741,8 @@ MACHINE_START(H1940, "IPAQ-H1940") .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, - .init_irq = h1940_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .timer = &s3c24xx_timer, + .init_time = h1940_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index c9954e26b49..e81ea82c55f 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -31,15 +32,13 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <plat/regs-serial.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/fb.h> +#include <mach/gpio-samsung.h> #include <asm/mach-types.h> @@ -48,13 +47,16 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/s3c2412.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> + +#include "common.h" +#include "s3c2412-power.h" static struct map_desc jive_iodesc[] __initdata = { }; @@ -465,6 +467,7 @@ static struct platform_device *jive_devices[] __initdata = { &jive_device_wm8750, &s3c_device_nand, &s3c_device_usbgadget, + &s3c2412_device_dma, }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { @@ -504,8 +507,14 @@ static struct syscore_ops jive_pm_syscore_ops = { static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init jive_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); } static void jive_power_off(void) @@ -658,9 +667,9 @@ MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .timer = &s3c24xx_timer, + .init_time = jive_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index a31d5b83e5f..5cc40ec1d25 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -23,8 +23,9 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/platform_device.h> #include <linux/gpio_keys.h> #include <linux/i2c.h> @@ -37,12 +38,11 @@ #include <mach/fb.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <linux/platform_data/leds-s3c24xx.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/irqs.h> +#include <mach/gpio-samsung.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -54,9 +54,9 @@ #include <linux/mtd/partitions.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include <sound/s3c24xx_uda134x.h> @@ -524,8 +524,14 @@ static struct platform_device *mini2440_devices[] __initdata = { static void __init mini2440_map_io(void) { s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init mini2440_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); } /* @@ -687,7 +693,7 @@ MACHINE_START(MINI2440, "MINI2440") .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_irq = s3c2440_init_irq, + .init_time = mini2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index c53a9bfe141..3ac2a54348d 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -24,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/timer.h> #include <linux/io.h> #include <linux/mmc/host.h> @@ -36,20 +37,19 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/regs-serial.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> -#include <plat/s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> #include "common.h" @@ -534,8 +534,14 @@ static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); n30_hwinit(); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init n30_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } /* GPB3 is the line that controls the pull-up for the USB D+ line */ @@ -589,9 +595,9 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .timer = &s3c24xx_timer, + .init_time = n30_init_time, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END @@ -600,9 +606,9 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .timer = &s3c24xx_timer, + .init_time = n30_init_time, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index a2b92b0898e..c82c281ce35 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/string.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -37,15 +38,13 @@ //#include <asm/debug-ll.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> +#include <mach/gpio-samsung.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -135,12 +134,18 @@ static void __init nexcoder_sensorboard_init(void) static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } +static void __init nexcoder_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); @@ -152,7 +157,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_irq = s3c2440_init_irq, + .init_time = nexcoder_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index 45e74363aaa..33afb919009 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -20,6 +20,7 @@ #include <linux/i2c/tps65010.h> #include <plat/cpu-freq.h> +#include <mach/gpio-samsung.h> #define OSIRIS_GPIO_DVS S3C2410_GPB(5) diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index bb36d832bd3..189147b80ec 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2440/mach-osiris.c - * +/* * Copyright (c) 2005-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -19,28 +18,20 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/clk.h> #include <linux/i2c.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/i2c/tps65010.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> - -#include <mach/osiris-map.h> -#include <mach/osiris-cpld.h> - -#include <mach/hardware.h> #include <asm/irq.h> -#include <asm/mach-types.h> -#include <plat/cpu-freq.h> -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> -#include <mach/regs-mem.h> -#include <mach/regs-lcd.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -49,12 +40,20 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/gpio-cfg.h> -#include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> +#include <plat/cpu-freq.h> +#include <plat/devs.h> +#include <plat/gpio-cfg.h> +#include <plat/samsung-time.h> + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> #include "common.h" +#include "osiris.h" +#include "regs-mem.h" /* onboard perihperal map */ @@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = { /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_i2c0, &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, }; -static struct clk *osiris_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata osiris_cpufreq = { .refresh = 7800, /* refresh period is 7.8usec */ .auto_io = 1, @@ -368,24 +360,9 @@ static void __init osiris_map_io(void) { unsigned long flags; - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -407,6 +384,12 @@ static void __init osiris_map_io(void) local_irq_restore(flags); } +static void __init osiris_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init osiris_init(void) { register_syscore_ops(&osiris_pm_syscore_ops); @@ -426,8 +409,8 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .timer = &s3c24xx_timer, + .init_time = osiris_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bca39f0232b..45833001186 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-otom.c +/* * * Copyright (c) 2004 Nex Vision * Guillaume GOURAT <guillaume.gourat@nexvision.fr> @@ -6,7 +6,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -16,29 +15,27 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/platform_data/i2c-s3c2410.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/otom-map.h> - #include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/samsung-time.h> #include "common.h" +#include "otom.h" static struct map_desc otom11_iodesc[] __initdata = { /* Device area */ @@ -102,8 +99,14 @@ static struct platform_device *otom11_devices[] __initdata = { static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init otom11_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } static void __init otom11_init(void) @@ -117,7 +120,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_irq = s3c2410_init_irq, + .init_time = otom11_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 7b6ba13d728..228c9094519 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -31,6 +31,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/io.h> @@ -49,19 +50,20 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> -#include <plat/regs-serial.h> #include <mach/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/i2c-s3c2410.h> +#include <mach/gpio-samsung.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc qt2410_iodesc[] __initdata = { { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } @@ -302,8 +304,14 @@ __setup("tft=", qt2410_tft_setup); static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); - s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init qt2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } static void __init qt2410_machine_init(void) @@ -341,8 +349,8 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, .map_io = qt2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .timer = &s3c24xx_timer, + .init_time = qt2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 0606f2faaa5..e2c6541909c 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2440/mach-rx1950.c - * +/* * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, * Copyright (c) 2007-2010 Vasily Khoruzhick * @@ -22,6 +21,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/device.h> @@ -37,31 +37,31 @@ #include <linux/mmc/host.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-lcd.h> -#include <mach/h1940.h> -#include <mach/fb.h> -#include <plat/clock.h> -#include <plat/regs-serial.h> -#include <plat/regs-iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> #include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> #include <sound/uda1380.h> +#include <mach/fb.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/pm.h> +#include <plat/samsung-time.h> +#include <plat/gpio-cfg.h> + #include "common.h" +#include "h1940.h" #define LCD_PWM_PERIOD 192960 #define LCD_PWM_DUTY 127353 @@ -523,6 +523,7 @@ static struct platform_pwm_backlight_data rx1950_backlight_data = { .max_brightness = 24, .dft_brightness = 4, .pwm_period_ns = 48000, + .enable_gpio = -1, .init = rx1950_backlight_init, .notify = rx1950_backlight_notify, .exit = rx1950_backlight_exit, @@ -531,7 +532,7 @@ static struct platform_pwm_backlight_data rx1950_backlight_data = { static struct platform_device rx1950_backlight = { .name = "pwm-backlight", .dev = { - .parent = &s3c_device_timer[0].dev, + .parent = &samsung_device_pwm.dev, .platform_data = &rx1950_backlight_data, }, }; @@ -708,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = { }; static struct platform_device *rx1950_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -718,8 +720,7 @@ static struct platform_device *rx1950_devices[] __initdata = { &s3c_device_sdi, &s3c_device_adc, &s3c_device_ts, - &s3c_device_timer[0], - &s3c_device_timer[1], + &samsung_device_pwm, &rx1950_backlight, &rx1950_device_gpiokeys, &power_supply, @@ -727,21 +728,11 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_leds, }; -static struct clk *rx1950_clocks[] __initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; - static void __init rx1950_map_io(void) { - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - - s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -752,6 +743,12 @@ static void __init rx1950_map_io(void) s3c_pm_init(); } +static void __init rx1950_init_time(void) +{ + s3c2442_init_clocks(16934000); + samsung_timer_init(); +} + static void __init rx1950_init_machine(void) { int i; @@ -812,8 +809,8 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .timer = &s3c24xx_timer, + .init_time = rx1950_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index dacbb9a2122..6e749ec3a2e 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -23,6 +23,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/serial.h> #include <linux/io.h> #include <linux/mtd/mtd.h> @@ -31,27 +32,27 @@ #include <linux/mtd/partitions.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/map.h> + +#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> +#include <mach/fb.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> -#include <mach/h1940.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <mach/fb.h> - -#include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> +#include <plat/devs.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" +#include "h1940.h" static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ @@ -177,8 +178,14 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init rx3715_init_time(void) +{ + s3c2440_init_clocks(16934000); + samsung_timer_init(); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -188,11 +195,6 @@ static void __init rx3715_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init rx3715_init_machine(void) { #ifdef CONFIG_PM_H1940 @@ -210,8 +212,8 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, - .init_irq = rx3715_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .timer = &s3c24xx_timer, + .init_time = rx3715_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c new file mode 100644 index 00000000000..e4dcb9aa2ca --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -0,0 +1,55 @@ +/* + * Samsung's S3C2416 flattened device tree enabled machine + * + * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> + * + * based on mach-exynos/mach-exynos4-dt.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/serial_s3c.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/pm.h> + +#include "common.h" + +static void __init s3c2416_dt_map_io(void) +{ + s3c24xx_init_io(NULL, 0); +} + +static void __init s3c2416_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + s3c_pm_init(); +} + +static char const *s3c2416_dt_compat[] __initdata = { + "samsung,s3c2416", + "samsung,s3c2450", + NULL +}; + +DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") + /* Maintainer: Heiko Stuebner <heiko@sntech.de> */ + .dt_compat = s3c2416_dt_compat, + .map_io = s3c2416_dt_map_io, + .init_irq = irqchip_init, + .init_machine = s3c2416_dt_machine_init, + .restart = s3c2416_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index 82796b97cb0..419fadd6e44 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -35,6 +35,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -46,15 +47,14 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> - -#include <plat/common-smdk.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ @@ -99,8 +99,14 @@ static struct platform_device *smdk2410_devices[] __initdata = { static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init smdk2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } static void __init smdk2410_init(void) @@ -115,8 +121,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, .map_io = smdk2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .timer = &s3c24xx_timer, + .init_time = smdk2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index ce99fd8bbbc..fb3b80e4459 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -19,8 +19,10 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/memblock.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -33,22 +35,21 @@ #include <asm/mach-types.h> //#include <asm/debug-ll.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/i2c-s3c2410.h> +#include <mach/gpio-samsung.h> #include <mach/fb.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2413_iodesc[] __initdata = { }; @@ -90,23 +91,27 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, + &s3c2412_device_dma, }; -static void __init smdk2413_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init smdk2413_fixup(struct tag *tags, char **cmdline) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; + memblock_add(0x30000000, SZ_64M); } } static void __init smdk2413_map_io(void) { s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init smdk2413_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); } static void __init smdk2413_machine_init(void) @@ -130,10 +135,10 @@ MACHINE_START(S3C2413, "S3C2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -142,10 +147,10 @@ MACHINE_START(SMDK2412, "SMDK2412") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -154,9 +159,9 @@ MACHINE_START(SMDK2413, "SMDK2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, + .init_time = smdk2413_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index f30d7fccbfe..fa6f30d2360 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/partitions.h> @@ -34,16 +35,14 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/gpio-samsung.h> -#include <mach/idle.h> #include <linux/platform_data/leds-s3c24xx.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2416.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> @@ -52,10 +51,12 @@ #include <plat/sdhci.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/s3c-hsudc.h> +#include <plat/samsung-time.h> #include <plat/fb.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2416_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -215,13 +216,20 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_usb_hsudc, + &s3c2443_device_dma, }; +static void __init smdk2416_init_time(void) +{ + s3c2416_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2416_map_io(void) { s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2416_machine_init(void) @@ -251,9 +259,9 @@ MACHINE_START(SMDK2416, "SMDK2416") /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .timer = &s3c24xx_timer, + .init_time = smdk2416_init_time, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index b7ff882c6ce..5fb89c0ae17 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,23 +32,18 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> - -#include <plat/common-smdk.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -162,8 +158,14 @@ static struct platform_device *smdk2440_devices[] __initdata = { static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init smdk2440_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); } static void __init smdk2440_machine_init(void) @@ -179,9 +181,9 @@ MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .timer = &s3c24xx_timer, + .init_time = smdk2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 2568656f046..ef5d5ea3318 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,21 +32,19 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2443_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -116,13 +115,20 @@ static struct platform_device *smdk2443_devices[] __initdata = { #ifdef CONFIG_SND_SOC_SMDK2443_WM9710 &s3c_device_ac97, #endif + &s3c2443_device_dma, }; static void __init smdk2443_map_io(void) { s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init smdk2443_init_time(void) +{ + s3c2443_init_clocks(12000000); + samsung_timer_init(); } static void __init smdk2443_machine_init(void) @@ -141,9 +147,9 @@ MACHINE_START(SMDK2443, "SMDK2443") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .timer = &s3c24xx_timer, + .init_time = smdk2443_init_time, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 495bf5cf52e..c616ca2d409 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -33,6 +33,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -44,7 +45,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -53,6 +53,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> #include "common.h" @@ -134,8 +135,14 @@ static struct platform_device *tct_hammer_devices[] __initdata = { static void __init tct_hammer_map_io(void) { s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init tct_hammer_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } static void __init tct_hammer_init(void) @@ -147,8 +154,8 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, .map_io = tct_hammer_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .timer = &s3c24xx_timer, + .init_time = tct_hammer_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 14d5b12e388..f88c584c300 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-vr1000.c - * +/* * Copyright (c) 2003-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -26,33 +25,32 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/bast-map.h> -#include <mach/vr1000-map.h> -#include <mach/vr1000-irq.h> -#include <mach/vr1000-cpld.h> - -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> #include <linux/platform_data/leds-s3c24xx.h> - -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> -#include "simtec.h" +#include <mach/hardware.h> +#include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/samsung-time.h> + +#include "bast.h" #include "common.h" +#include "simtec.h" +#include "vr1000.h" /* macros for virtual address mods for the io space entries */ #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) @@ -143,7 +141,7 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = VR1000_SERIAL_MAPBASE(0), - .irq = IRQ_VR1000_SERIAL + 0, + .irq = VR1000_IRQ_SERIAL + 0, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -151,7 +149,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, [1] = { .mapbase = VR1000_SERIAL_MAPBASE(1), - .irq = IRQ_VR1000_SERIAL + 1, + .irq = VR1000_IRQ_SERIAL + 1, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -159,7 +157,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, [2] = { .mapbase = VR1000_SERIAL_MAPBASE(2), - .irq = IRQ_VR1000_SERIAL + 2, + .irq = VR1000_IRQ_SERIAL + 2, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -167,7 +165,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, [3] = { .mapbase = VR1000_SERIAL_MAPBASE(3), - .irq = IRQ_VR1000_SERIAL + 3, + .irq = VR1000_IRQ_SERIAL + 3, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -189,14 +187,14 @@ static struct platform_device serial_device = { static struct resource vr1000_dm9k0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4), [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40), - [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \ + [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \ | IORESOURCE_IRQ_HIGHLEVEL), }; static struct resource vr1000_dm9k1_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4), [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40), - [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \ + [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \ | IORESOURCE_IRQ_HIGHLEVEL), }; @@ -287,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -300,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static void vr1000_power_off(void) { gpio_direction_output(S3C2410_GPB(9), 1); @@ -315,26 +306,17 @@ static void vr1000_power_off(void) static void __init vr1000_map_io(void) { - /* initialise clock sources */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 3692307; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks)); - pm_power_off = vr1000_power_off; s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init vr1000_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); } static void __init vr1000_init(void) @@ -356,7 +338,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_irq = s3c2410_init_irq, + .init_time = vr1000_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index f1d44ae1183..9104c2be36c 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -16,12 +16,14 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <linux/memblock.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,22 +34,20 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> +#include "common.h" static struct map_desc vstms_iodesc[] __initdata = { }; @@ -127,23 +127,27 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, + &s3c2412_device_dma, }; -static void __init vstms_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init vstms_fixup(struct tag *tags, char **cmdline) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; + memblock_add(0x30000000, SZ_64M); } } static void __init vstms_map_io(void) { s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); +} + +static void __init vstms_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); } static void __init vstms_init(void) @@ -158,9 +162,9 @@ MACHINE_START(VSTMS, "VSTMS") .atag_offset = 0x100, .fixup = vstms_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .timer = &s3c24xx_timer, + .init_time = vstms_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/osiris.h index 17380f84842..b8d56074aba 100644 --- a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h +++ b/arch/arm/mach-s3c24xx/osiris.h @@ -1,9 +1,9 @@ -/* arch/arm/mach-s3c2410/include/mach/osiris-map.h - * +/* * Copyright 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks <ben@simtec.co.uk> * + * OSIRIS - CPLD control constants * OSIRIS - Memory map definitions * * This program is free software; you can redistribute it and/or modify @@ -11,10 +11,21 @@ * published by the Free Software Foundation. */ -/* needs arch/map.h including with this */ +#ifndef __MACH_S3C24XX_OSIRIS_H +#define __MACH_S3C24XX_OSIRIS_H __FILE__ + +/* CTRL0 - NAND WP control */ + +#define OSIRIS_CTRL0_NANDSEL (0x3) +#define OSIRIS_CTRL0_BOOT_INT (1<<3) +#define OSIRIS_CTRL0_PCMCIA (1<<4) +#define OSIRIS_CTRL0_FIX8 (1<<5) +#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) +#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) + +#define OSIRIS_CTRL1_FIX8 (1<<0) -#ifndef __ASM_ARCH_OSIRISMAP_H -#define __ASM_ARCH_OSIRISMAP_H +#define OSIRIS_ID_REVMASK (0x7) /* start peripherals off after the S3C2410 */ @@ -39,4 +50,4 @@ #define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000) #define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23)) -#endif /* __ASM_ARCH_OSIRISMAP_H */ +#endif /* __MACH_S3C24XX_OSIRIS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/otom.h index f9277a52c14..321b7be1c0f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/otom-map.h +++ b/arch/arm/mach-s3c24xx/otom.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/otom-map.h - * +/* * (c) 2005 Guillaume GOURAT / NexVision * guillaume.gourat@nexvision.fr * @@ -10,21 +9,20 @@ * published by the Free Software Foundation. */ -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x01300000, now we need to find space for the +/* + * ok, we've used up to 0x01300000, now we need to find space for the * peripherals that live in the nGCS[x] areas, which are quite numerous * in their space. */ -#ifndef __ASM_ARCH_OTOMMAP_H -#define __ASM_ARCH_OTOMMAP_H +#ifndef __MACH_S3C24XX_OTOM_H +#define __MACH_S3C24XX_OTOM_H __FILE__ -#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ -#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ +#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ +#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ /* physical offset addresses for the peripherals */ -#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */ +#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) -#endif /* __ASM_ARCH_OTOMMAP_H */ +#endif /* __MACH_S3C24XX_OTOM_H */ diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c new file mode 100644 index 00000000000..5e37d368594 --- /dev/null +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2006-2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@arm.linux.org.uk> + * + * S3C2410 CPU PLL tables + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> + +static struct cpufreq_frequency_table pll_vals_12MHz[] = { + { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), }, + { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), }, + { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, + { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), }, + { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), }, + { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), }, + { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), }, + { .frequency = 85000000, .driver_data = PLLVAL(105, 2, 2), }, + { .frequency = 90000000, .driver_data = PLLVAL(112, 2, 2), }, + { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2), }, + { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2), }, + { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2), }, + { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2), }, + { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1), }, + { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1), }, + { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1), }, + { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1), }, + { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1), }, + { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1), }, + { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1), }, + { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1), }, + { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1), }, + + /* 2410A extras */ + + { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1), }, + { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1), }, + { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1), }, + { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1), }, + { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1), }, +}; + +static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) +{ + return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); +} + +static struct subsys_interface s3c2410_plls_interface = { + .name = "s3c2410_plls", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_plls_add, +}; + +static int __init s3c2410_pll_init(void) +{ + return subsys_interface_register(&s3c2410_plls_interface); + +} +arch_initcall(s3c2410_pll_init); + +static struct subsys_interface s3c2410a_plls_interface = { + .name = "s3c2410a_plls", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410_plls_add, +}; + +static int __init s3c2410a_pll_init(void) +{ + return subsys_interface_register(&s3c2410a_plls_interface); +} +arch_initcall(s3c2410a_pll_init); diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c new file mode 100644 index 00000000000..a19460e6e7b --- /dev/null +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -0,0 +1,98 @@ +/* + * Copyright (c) 2006-2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@arm.linux.org.uk> + * + * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> + +static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { + { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ + { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ + { .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ + { .frequency = 100000000, .driver_data = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ + { .frequency = 110000000, .driver_data = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ + { .frequency = 120000000, .driver_data = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ + { .frequency = 150000000, .driver_data = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ + { .frequency = 160000000, .driver_data = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ + { .frequency = 170000000, .driver_data = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ + { .frequency = 180000000, .driver_data = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ + { .frequency = 190000000, .driver_data = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ + { .frequency = 200000000, .driver_data = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ + { .frequency = 210000000, .driver_data = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ + { .frequency = 220000000, .driver_data = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ + { .frequency = 230000000, .driver_data = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ + { .frequency = 240000000, .driver_data = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ + { .frequency = 300000000, .driver_data = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ + { .frequency = 310000000, .driver_data = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ + { .frequency = 320000000, .driver_data = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ + { .frequency = 330000000, .driver_data = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ + { .frequency = 340000000, .driver_data = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ + { .frequency = 350000000, .driver_data = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ + { .frequency = 360000000, .driver_data = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ + { .frequency = 370000000, .driver_data = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ + { .frequency = 380000000, .driver_data = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ + { .frequency = 390000000, .driver_data = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ + { .frequency = 400000000, .driver_data = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ +}; + +static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) +{ + struct clk *xtal_clk; + unsigned long xtal; + + xtal_clk = clk_get(NULL, "xtal"); + if (IS_ERR(xtal_clk)) + return PTR_ERR(xtal_clk); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + if (xtal == 12000000) { + printk(KERN_INFO "Using PLL table for 12MHz crystal\n"); + return s3c_plltab_register(s3c2440_plls_12, + ARRAY_SIZE(s3c2440_plls_12)); + } + + return 0; +} + +static struct subsys_interface s3c2440_plls12_interface = { + .name = "s3c2440_plls12", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_plls12_add, +}; + +static int __init s3c2440_pll_12mhz(void) +{ + return subsys_interface_register(&s3c2440_plls12_interface); + +} +arch_initcall(s3c2440_pll_12mhz); + +static struct subsys_interface s3c2442_plls12_interface = { + .name = "s3c2442_plls12", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_plls12_add, +}; + +static int __init s3c2442_pll_12mhz(void) +{ + return subsys_interface_register(&s3c2442_plls12_interface); + +} +arch_initcall(s3c2442_pll_12mhz); diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c new file mode 100644 index 00000000000..1191b290562 --- /dev/null +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -0,0 +1,125 @@ +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@arm.linux.org.uk> + * + * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> + +static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { + { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ + { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ + { .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ + { .frequency = 96163200, .driver_data = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ + { .frequency = 102135600, .driver_data = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ + { .frequency = 108259200, .driver_data = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ + { .frequency = 114307200, .driver_data = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ + { .frequency = 120234240, .driver_data = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ + { .frequency = 126161280, .driver_data = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ + { .frequency = 132088320, .driver_data = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ + { .frequency = 138015360, .driver_data = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ + { .frequency = 144789120, .driver_data = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ + { .frequency = 150100363, .driver_data = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ + { .frequency = 156038400, .driver_data = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ + { .frequency = 162086400, .driver_data = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ + { .frequency = 168134400, .driver_data = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ + { .frequency = 174048000, .driver_data = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ + { .frequency = 180230400, .driver_data = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ + { .frequency = 186278400, .driver_data = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ + { .frequency = 192326400, .driver_data = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ + { .frequency = 198132480, .driver_data = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ + { .frequency = 204271200, .driver_data = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ + { .frequency = 210268800, .driver_data = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ + { .frequency = 216518400, .driver_data = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ + { .frequency = 222264000, .driver_data = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ + { .frequency = 228614400, .driver_data = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ + { .frequency = 234259200, .driver_data = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ + { .frequency = 240468480, .driver_data = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ + { .frequency = 246960000, .driver_data = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ + { .frequency = 252322560, .driver_data = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ + { .frequency = 258249600, .driver_data = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ + { .frequency = 264176640, .driver_data = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ + { .frequency = 270950400, .driver_data = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ + { .frequency = 276030720, .driver_data = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ + { .frequency = 282240000, .driver_data = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ + { .frequency = 289578240, .driver_data = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ + { .frequency = 294235200, .driver_data = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ + { .frequency = 300200727, .driver_data = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ + { .frequency = 306358690, .driver_data = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ + { .frequency = 312076800, .driver_data = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ + { .frequency = 318366720, .driver_data = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ + { .frequency = 324172800, .driver_data = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ + { .frequency = 330220800, .driver_data = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ + { .frequency = 336268800, .driver_data = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ + { .frequency = 342074880, .driver_data = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ + { .frequency = 348096000, .driver_data = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ + { .frequency = 355622400, .driver_data = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ + { .frequency = 360460800, .driver_data = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ + { .frequency = 366206400, .driver_data = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ + { .frequency = 372556800, .driver_data = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ + { .frequency = 378201600, .driver_data = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ + { .frequency = 384652800, .driver_data = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ + { .frequency = 391608000, .driver_data = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ + { .frequency = 396264960, .driver_data = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ + { .frequency = 402192000, .driver_data = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ +}; + +static int s3c2440_plls169344_add(struct device *dev, + struct subsys_interface *sif) +{ + struct clk *xtal_clk; + unsigned long xtal; + + xtal_clk = clk_get(NULL, "xtal"); + if (IS_ERR(xtal_clk)) + return PTR_ERR(xtal_clk); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + if (xtal == 169344000) { + printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n"); + return s3c_plltab_register(s3c2440_plls_169344, + ARRAY_SIZE(s3c2440_plls_169344)); + } + + return 0; +} + +static struct subsys_interface s3c2440_plls169344_interface = { + .name = "s3c2440_plls169344", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_plls169344_add, +}; + +static int __init s3c2440_pll_16934400(void) +{ + return subsys_interface_register(&s3c2440_plls169344_interface); +} +arch_initcall(s3c2440_pll_16934400); + +static struct subsys_interface s3c2442_plls169344_interface = { + .name = "s3c2442_plls169344", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_plls169344_add, +}; + +static int __init s3c2442_pll_16934400(void) +{ + return subsys_interface_register(&s3c2442_plls169344_interface); +} +arch_initcall(s3c2442_pll_16934400); diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S index c93bf2db9f4..6183a688012 100644 --- a/arch/arm/mach-s3c24xx/pm-h1940.S +++ b/arch/arm/mach-s3c24xx/pm-h1940.S @@ -30,4 +30,4 @@ h1940_pm_return: mov r0, #S3C2410_PA_GPIO - ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ] + ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO] diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 949ae05e07c..20e481d8a33 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c @@ -29,16 +29,18 @@ #include <linux/gpio.h> #include <linux/io.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <mach/h1940.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <plat/cpu.h> #include <plat/pm.h> +#include "h1940.h" + static void s3c2410_pm_prepare(void) { /* ensure at least GSTATUS3 has the resume address */ diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index c60f67a75af..d75f95e487e 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -21,18 +21,18 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/cacheflush.h> #include <asm/irq.h> -#include <mach/regs-power.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <mach/regs-dsc.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/wakeup-mask.h> -#include <plat/s3c2412.h> +#include "regs-dsc.h" +#include "s3c2412-power.h" extern void s3c2412_sleep_enter(void); @@ -48,11 +48,19 @@ static int s3c2412_cpu_suspend(unsigned long arg) s3c2412_sleep_enter(); - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask wake_irqs[] = { + { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, +}; + static void s3c2412_pm_prepare(void) { + samsung_sync_wakemask(S3C2412_PWRCFG, + wake_irqs, ARRAY_SIZE(wake_irqs)); } static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c index 1bd4817b8eb..44923895f55 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2416.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c @@ -16,12 +16,13 @@ #include <asm/cacheflush.h> -#include <mach/regs-power.h> #include <mach/regs-s3c2443-clock.h> #include <plat/cpu.h> #include <plat/pm.h> +#include "s3c2412-power.h" + extern void s3c2412_sleep_enter(void); static int s3c2416_cpu_suspend(unsigned long arg) @@ -34,7 +35,8 @@ static int s3c2416_cpu_suspend(unsigned long arg) s3c2412_sleep_enter(); - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s3c2416_pm_prepare(void) diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 724755f0b0f..b19256ec8d4 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -33,25 +33,24 @@ #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-irq.h> +#include <mach/gpio-samsung.h> #include <asm/mach/time.h> #include <plat/gpio-cfg.h> #include <plat/pm.h> +#include "regs-mem.h" + #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - /* we restore the timings here, with the proviso that the board * brings the system up in an slower, or equal frequency setting * to the original system. @@ -67,18 +66,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON3), SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_REFRESH), -#endif - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), -}; - -static struct sleep_save misc_save[] = { - SAVE_ITEM(S3C2410_DCLKCON), }; /* s3c_pm_check_resume_pin @@ -138,12 +125,10 @@ void s3c_pm_configure_extint(void) void s3c_pm_restore_core(void) { s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } void s3c_pm_save_core(void) { - s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } diff --git a/arch/arm/mach-s3c24xx/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h new file mode 100644 index 00000000000..61b3d1387d7 --- /dev/null +++ b/arch/arm/mach-s3c24xx/regs-dsc.h @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440/S3C2412 Signal Drive Strength Control +*/ + + +#ifndef __ASM_ARCH_REGS_DSC_H +#define __ASM_ARCH_REGS_DSC_H __FILE__ + +/* S3C2412 */ +#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) +#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) + +/* S3C2440 */ +#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) +#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) + +#endif /* __ASM_ARCH_REGS_DSC_H */ + diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c24xx/regs-mem.h new file mode 100644 index 00000000000..86b1258368c --- /dev/null +++ b/arch/arm/mach-s3c24xx/regs-mem.h @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Memory Control register definitions + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H +#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__ + +#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) + +#define S3C2410_BWSCON S3C2410_MEMREG(0x00) +#define S3C2410_BANKCON0 S3C2410_MEMREG(0x04) +#define S3C2410_BANKCON1 S3C2410_MEMREG(0x08) +#define S3C2410_BANKCON2 S3C2410_MEMREG(0x0C) +#define S3C2410_BANKCON3 S3C2410_MEMREG(0x10) +#define S3C2410_BANKCON4 S3C2410_MEMREG(0x14) +#define S3C2410_BANKCON5 S3C2410_MEMREG(0x18) +#define S3C2410_BANKCON6 S3C2410_MEMREG(0x1C) +#define S3C2410_BANKCON7 S3C2410_MEMREG(0x20) +#define S3C2410_REFRESH S3C2410_MEMREG(0x24) +#define S3C2410_BANKSIZE S3C2410_MEMREG(0x28) + +#define S3C2410_BWSCON_ST1 (1 << 7) +#define S3C2410_BWSCON_ST2 (1 << 11) +#define S3C2410_BWSCON_ST3 (1 << 15) +#define S3C2410_BWSCON_ST4 (1 << 19) +#define S3C2410_BWSCON_ST5 (1 << 23) + +#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf) + +#define S3C2410_BWSCON_WS (1 << 2) + +#define S3C2410_BANKCON_PMC16 (0x3) + +#define S3C2410_BANKCON_Tacp_SHIFT (2) +#define S3C2410_BANKCON_Tcah_SHIFT (4) +#define S3C2410_BANKCON_Tcoh_SHIFT (6) +#define S3C2410_BANKCON_Tacc_SHIFT (8) +#define S3C2410_BANKCON_Tcos_SHIFT (11) +#define S3C2410_BANKCON_Tacs_SHIFT (13) + +#define S3C2410_BANKCON_SDRAM (0x3 << 15) + +#define S3C2410_REFRESH_SELF (1 << 22) + +#define S3C2410_BANKSIZE_MASK (0x7 << 0) + +#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */ diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index a3c5cb086ee..7eab8882988 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -21,7 +21,9 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> +#include <linux/reboot.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -29,15 +31,14 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> +#include <mach/gpio-samsung.h> #include <asm/irq.h> #include <asm/system_misc.h> #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> -#include <plat/s3c2410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> @@ -49,6 +50,8 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> +#include "common.h" + /* Initial IO mappings */ static struct map_desc s3c2410_iodesc[] __initdata = { @@ -82,61 +85,6 @@ void __init s3c2410_map_io(void) void __init_or_cpufreq s3c2410_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -/* fake ARMCLK for use with cpufreq, etc. */ - -static struct clk s3c2410_armclk = { - .name = "armclk", - .parent = &clk_f, - .id = -1, -}; - -static struct clk_lookup s3c2410_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), -}; - -void __init s3c2410_init_clocks(int xtal) -{ - s3c24xx_register_baseclocks(xtal); - s3c2410_setup_clocks(); - s3c2410_baseclk_add(); - s3c24xx_register_clock(&s3c2410_armclk); - clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); } struct bus_type s3c2410_subsys = { @@ -182,8 +130,8 @@ int __init s3c2410_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); -#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); +#endif return device_register(&s3c2410_dev); } @@ -194,13 +142,13 @@ int __init s3c2410a_init(void) return s3c2410_init(); } -void s3c2410_restart(char mode, const char *cmd) +void s3c2410_restart(enum reboot_mode mode, const char *cmd) { - if (mode == 's') { + if (mode == REBOOT_SOFT) { soft_restart(0); } - arch_wdt_reset(); + samsung_wdt_reset(); /* we'll take a jump through zero as a poor second */ soft_restart(0); diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c24xx/s3c2412-power.h new file mode 100644 index 00000000000..1b02c5ddb31 --- /dev/null +++ b/arch/arm/mach-s3c24xx/s3c2412-power.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H +#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__ + +#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) +#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) + +#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) +#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) +#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) +#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) + +#define S3C2412_PWRCFG_BATF_IRQ (1 << 0) +#define S3C2412_PWRCFG_BATF_IGNORE (2 << 0) +#define S3C2412_PWRCFG_BATF_SLEEP (3 << 0) +#define S3C2412_PWRCFG_BATF_MASK (3 << 0) + +#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_STOP (2 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_MASK (3 << 6) + +#define S3C2412_PWRCFG_RTC_MASKIRQ (1 << 8) +#define S3C2412_PWRCFG_NAND_NORST (1 << 9) + +#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */ diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 6c5f4031ff0..d49f52fbc84 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2412/s3c2412.c - * +/* * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -21,35 +20,38 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/reboot.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/system_misc.h> -#include <plat/cpu-freq.h> - +#include <mach/hardware.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> -#include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-dsc.h> -#include <plat/regs-spi.h> -#include <mach/regs-s3c2412.h> -#include <plat/s3c2412.h> +#include <plat/clock.h> #include <plat/cpu.h> +#include <plat/cpu-freq.h> #include <plat/devs.h> -#include <plat/clock.h> -#include <plat/pm.h> -#include <plat/pll.h> #include <plat/nand-core.h> +#include <plat/pll.h> +#include <plat/pm.h> +#include <plat/regs-spi.h> + +#include "common.h" +#include "regs-dsc.h" +#include "s3c2412-power.h" + +#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) +#define S3C2412_SWRST_RESET (0x533C2412) #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; @@ -128,9 +130,9 @@ static void s3c2412_idle(void) cpu_do_idle(); } -void s3c2412_restart(char mode, const char *cmd) +void s3c2412_restart(enum reboot_mode mode, const char *cmd) { - if (mode == 's') + if (mode == REBOOT_SOFT) soft_restart(0); /* errata "Watch-dog/Software Reset Problem" specifies that @@ -171,49 +173,6 @@ void __init s3c2412_map_io(void) void __init_or_cpufreq s3c2412_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); - - clk_mpll.rate = fclk; - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c2412_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_register_baseclocks(xtal); - s3c2412_setup_clocks(); - s3c2412_baseclk_add(); } /* need to register the subsystem before we actually register the device, and @@ -244,8 +203,8 @@ int __init s3c2412_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2412_pm_syscore_ops); -#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); +#endif return device_register(&s3c2412_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 77ee0b73223..9fe260ae11e 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -35,22 +35,24 @@ #include <linux/syscore_ops.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/reboot.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <mach/hardware.h> +#include <mach/gpio-samsung.h> #include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2416.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/sdhci.h> @@ -60,9 +62,10 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> +#include "common.h" + static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), IODESC_ENT(CLKPWR), @@ -78,9 +81,9 @@ static struct device s3c2416_dev = { .bus = &s3c2416_subsys, }; -void s3c2416_restart(char mode, const char *cmd) +void s3c2416_restart(enum reboot_mode mode, const char *cmd) { - if (mode == 's') + if (mode == REBOOT_SOFT) soft_restart(0); __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); @@ -105,9 +108,9 @@ int __init s3c2416_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2416_pm_syscore_ops); -#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); register_syscore_ops(&s3c2416_irq_syscore_ops); +#endif return device_register(&s3c2416_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 2b3dddb49af..03d379f1fc5 100644 --- a/arch/arm/mach-s3c24xx/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -29,17 +29,19 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> +#include <mach/gpio-samsung.h> #include <asm/irq.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> +#include "common.h" + static struct device s3c2440_dev = { .bus = &s3c2440_subsys, }; @@ -57,9 +59,9 @@ int __init s3c2440_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); #endif register_syscore_ops(&s3c244x_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); /* register our system device for everything else */ diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 22cb7c94a8c..fb9da2b603a 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -37,6 +37,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/gpio-samsung.h> #include <linux/atomic.h> #include <asm/irq.h> @@ -44,123 +45,13 @@ #include <plat/clock.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .ops = &(struct clk_ops) { - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, - }, -}; - -static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); - +#include "common.h" static struct device s3c2442_dev = { .bus = &s3c2442_subsys, @@ -172,9 +63,9 @@ int __init s3c2442_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); #endif register_syscore_ops(&s3c244x_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); return device_register(&s3c2442_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 165b6a6b3da..c7a804d0348 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -22,27 +22,28 @@ #include <linux/device.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/reboot.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <mach/hardware.h> +#include <mach/gpio-samsung.h> #include <asm/irq.h> #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2443.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { @@ -60,9 +61,9 @@ static struct device s3c2443_dev = { .bus = &s3c2443_subsys, }; -void s3c2443_restart(char mode, const char *cmd) +void s3c2443_restart(enum reboot_mode mode, const char *cmd) { - if (mode == 's') + if (mode == REBOOT_SOFT) soft_restart(0); __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index b0b60a1154d..4a64bcc9eb5 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -17,7 +17,9 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> +#include <linux/reboot.h> #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/clk.h> @@ -34,12 +36,8 @@ #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-dsc.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -48,6 +46,9 @@ #include <plat/nand-core.h> #include <plat/watchdog-reset.h> +#include "common.h" +#include "regs-dsc.h" + static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), IODESC_ENT(TIMER), @@ -74,66 +75,11 @@ void __init s3c244x_map_io(void) s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; + s3c2410_device_dclk.name = "s3c2440-dclk"; } void __init_or_cpufreq s3c244x_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); } /* Since the S3C2442 and S3C2440 share items, put both subsystems here */ @@ -198,12 +144,12 @@ struct syscore_ops s3c244x_pm_syscore_ops = { .resume = s3c244x_resume, }; -void s3c244x_restart(char mode, const char *cmd) +void s3c244x_restart(enum reboot_mode mode, const char *cmd) { - if (mode == 's') + if (mode == REBOOT_SOFT) soft_restart(0); - arch_wdt_reset(); + samsung_wdt_reset(); /* we'll take a jump through zero as a poor second */ soft_restart(0); diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c index 7b4f33332d1..1852696ca16 100644 --- a/arch/arm/mach-s3c24xx/setup-i2c.c +++ b/arch/arm/mach-s3c24xx/setup-i2c.c @@ -19,6 +19,7 @@ struct platform_device; #include <linux/platform_data/i2c-s3c2410.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { diff --git a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c index f65cb3ef16c..c99b0f664db 100644 --- a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> #include <plat/gpio-cfg.h> void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index 4e11affce3a..46466d20257 100644 --- a/arch/arm/mach-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c @@ -15,7 +15,9 @@ struct platform_device; /* don't need the contents */ +#include <plat/gpio-cfg.h> #include <mach/hardware.h> +#include <mach/gpio-samsung.h> /** * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index fd0ef05763a..67cb5120dfe 100644 --- a/arch/arm/mach-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -17,16 +17,13 @@ #include <linux/device.h> #include <linux/io.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> -#include <mach/bast-cpld.h> - #include <mach/hardware.h> #include <mach/regs-gpio.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> #include <plat/devs.h> +#include "bast.h" #include "simtec.h" /* platform ops for audio */ diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c index 029744fcaac..8884bffa619 100644 --- a/arch/arm/mach-s3c24xx/simtec-nor.c +++ b/arch/arm/mach-s3c24xx/simtec-nor.c @@ -27,9 +27,8 @@ #include <asm/mach/irq.h> #include <mach/map.h> -#include <mach/bast-map.h> -#include <mach/bast-cpld.h> +#include "bast.h" #include "simtec.h" static void simtec_nor_vpp(struct platform_device *pdev, int vpp) diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c24xx/simtec-pm.c index 699f9317129..38a2f1fdeba 100644 --- a/arch/arm/mach-s3c24xx/simtec-pm.c +++ b/arch/arm/mach-s3c24xx/simtec-pm.c @@ -28,12 +28,13 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <asm/mach-types.h> #include <plat/pm.h> +#include "regs-mem.h" + #define COPYRIGHT ", Copyright 2005 Simtec Electronics" /* pm_simtec_init diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index ddf7a3c743a..b70aa66efeb 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -28,15 +28,14 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> - #include <mach/hardware.h> +#include <mach/gpio-samsung.h> #include <asm/irq.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/devs.h> +#include "bast.h" #include "simtec.h" /* control power and monitor over-current events on various Simtec @@ -79,15 +78,14 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) int ret; if (on) { - ret = request_irq(IRQ_USBOC, usb_simtec_ocirq, - IRQF_DISABLED | IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, + ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "USB Over-current", info); if (ret != 0) { printk(KERN_ERR "failed to request usb oc irq\n"); } } else { - free_irq(IRQ_USBOC, info); + free_irq(BAST_IRQ_USBOC, info); } } diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd5b6388a5a..c9b91223697 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -25,14 +25,15 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <mach/regs-mem.h> -#include <plat/regs-serial.h> + +#include "regs-mem.h" /* s3c2410_cpu_suspend * @@ -45,9 +46,9 @@ ENTRY(s3c2410_cpu_suspend) ldr r4, =S3C2410_REFRESH ldr r5, =S3C24XX_MISCCR ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + ldr r7, [r4] @ get REFRESH (and ensure in TLB) + ldr r8, [r5] @ get MISCCR (and ensure in TLB) + ldr r9, [r6] @ get CLKCON (and ensure in TLB) orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals @@ -61,8 +62,8 @@ ENTRY(s3c2410_cpu_suspend) @@ align next bit of code to cache line .align 5 s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep + streq r7, [r4] @ SDRAM sleep command + streq r8, [r5] @ SDRAM power-down config + streq r9, [r6] @ CPU sleep 1: beq 1b mov pc, r14 diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index c82418ed714..5adaceb7da1 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S @@ -57,12 +57,12 @@ s3c2412_sleep_enter1: * retry, as simply returning causes the system to lock. */ - ldrne r9, [ r1 ] - strne r9, [ r1 ] - ldrne r9, [ r2 ] - strne r9, [ r2 ] - ldrne r9, [ r3 ] - strne r9, [ r3 ] + ldrne r9, [r1] + strne r9, [r1] + ldrne r9, [r2] + strne r9, [r2] + ldrne r9, [r3] + strne r9, [r3] bne s3c2412_sleep_enter1 mov pc, r14 diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S index c56612569b4..d833d616bd2 100644 --- a/arch/arm/mach-s3c24xx/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep.S @@ -25,14 +25,13 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <mach/regs-mem.h> -#include <plat/regs-serial.h> /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c24xx/vr1000.h new file mode 100644 index 00000000000..7fcd2c2f183 --- /dev/null +++ b/arch/arm/mach-s3c24xx/vr1000.h @@ -0,0 +1,118 @@ + +/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h + * + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * VR1000 - CPLD control constants + * Machine VR1000 - IRQ Number definitions + * Machine VR1000 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_VR1000_H +#define __MACH_S3C24XX_VR1000_H __FILE__ + +#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ + +/* irq numbers to onboard peripherals */ + +#define VR1000_IRQ_USBOC IRQ_EINT19 +#define VR1000_IRQ_IDE0 IRQ_EINT16 +#define VR1000_IRQ_IDE1 IRQ_EINT17 +#define VR1000_IRQ_SERIAL IRQ_EINT12 +#define VR1000_IRQ_DM9000A IRQ_EINT10 +#define VR1000_IRQ_DM9000N IRQ_EINT9 +#define VR1000_IRQ_SMALERT IRQ_EINT8 + +/* map */ + +#define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ +#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ +#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ +#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ +#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ +#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) + +#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ +#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) + +#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ +#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) + +/* + * 0xE0000000 contains the IO space that is split by speed and + * whether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers + * 0x02600000 to 0x02700000 1MB + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define VR1000_VA_MULTISPACE (0xE0000000) + +#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) +#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) +#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) +#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) +#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) +#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) +#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) +#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) +#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) + +/* physical offset addresses for the peripherals */ + +#define VR1000_PA_IDEPRI (0x02000000) +#define VR1000_PA_IDEPRIAUX (0x02800000) +#define VR1000_PA_IDESEC (0x03000000) +#define VR1000_PA_IDESECAUX (0x03800000) +#define VR1000_PA_DM9000 (0x05000000) + +#define VR1000_PA_SERIAL (0x11800000) +#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) + +/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ +#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) + +/* some configurations for the peripherals */ + +#define VR1000_DM9000_CS VR1000_VAM_CS4 + +#endif /* __MACH_S3C24XX_VR1000_H */ |