aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2440
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2440')
-rw-r--r--arch/arm/mach-s3c2440/Kconfig122
-rw-r--r--arch/arm/mach-s3c2440/Makefile29
-rw-r--r--arch/arm/mach-s3c2440/clock.c150
-rw-r--r--arch/arm/mach-s3c2440/dma.c211
-rw-r--r--arch/arm/mach-s3c2440/dsc.c54
-rw-r--r--arch/arm/mach-s3c2440/irq.c126
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c508
-rw-r--r--arch/arm/mach-s3c2440/mach-at2440evb.c244
-rw-r--r--arch/arm/mach-s3c2440/mach-mini2440.c704
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c160
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris-dvs.c194
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c464
-rw-r--r--arch/arm/mach-s3c2440/mach-rx3715.c220
-rw-r--r--arch/arm/mach-s3c2440/mach-smdk2440.c186
-rw-r--r--arch/arm/mach-s3c2440/s3c2440.c52
15 files changed, 0 insertions, 3424 deletions
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
deleted file mode 100644
index 80879358eb2..00000000000
--- a/arch/arm/mach-s3c2440/Kconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2440
- bool
- depends on ARCH_S3C2410
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select S3C2410_GPIO
- select S3C2440_DMA if S3C2410_DMA
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2440 Samsung Mobile CPU based systems.
-
-config S3C2440_DMA
- bool
- depends on ARCH_S3C2410 && CPU_S3C24405B
- help
- Support for S3C2440 specific DMA code5A
-
-
-menu "S3C2440 Machines"
-
-config MACH_ANUBIS
- bool "Simtec Electronics ANUBIS"
- select CPU_S3C2440
- select S3C24XX_DCLK
- select PM_SIMTEC if PM
- select HAVE_PATA_PLATFORM
- select S3C24XX_GPIO_EXTRA64
- select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Simtec Electronics ANUBIS
- development system
-
-config MACH_OSIRIS
- bool "Simtec IM2440D20 (OSIRIS) module"
- select CPU_S3C2440
- select S3C24XX_DCLK
- select PM_SIMTEC if PM
- select S3C24XX_GPIO_EXTRA128
- select S3C2440_XTAL_12000000
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Simtec IM2440D20 module, also
- known as the Osiris.
-
-config MACH_OSIRIS_DVS
- tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
- depends on MACH_OSIRIS
- select TPS65010
- help
- Say Y/M here if you want to have dynamic voltage scaling support
- on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
- The DVS driver alters the voltage supplied to the ARM core
- depending on the frequency it is running at. The driver itself
- does not do any of the frequency alteration, which is left up
- to the cpufreq driver.
-
-config MACH_RX3715
- bool "HP iPAQ rx3715"
- select CPU_S3C2440
- select S3C2440_XTAL_16934400
- select PM_H1940 if PM
- select S3C_DEV_NAND
- help
- Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
- bool "SMDK2440"
- select CPU_S3C2440
- select S3C2440_XTAL_16934400
- select MACH_SMDK
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the SMDK2440.
-
-config MACH_NEXCODER_2440
- bool "NexVision NEXCODER 2440 Light Board"
- select CPU_S3C2440
- select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config SMDK2440_CPU2440
- bool "SMDK2440 with S3C2440 CPU module"
- depends on ARCH_S3C2440
- default y if ARCH_S3C2440
- select S3C2440_XTAL_16934400
- select CPU_S3C2440
-
-config MACH_AT2440EVB
- bool "Avantech AT2440EVB development board"
- select CPU_S3C2440
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
- bool "MINI2440 development board"
- select CPU_S3C2440
- select EEPROM_AT24
- select LEDS_TRIGGER_BACKLIGHT
- select SND_S3C24XX_SOC_S3C24XX_UDA134X
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
- available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-endmenu
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
deleted file mode 100644
index 5f322453188..00000000000
--- a/arch/arm/mach-s3c2440/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
-obj-$(CONFIG_CPU_S3C2440) += irq.o
-obj-$(CONFIG_CPU_S3C2440) += clock.o
-obj-$(CONFIG_S3C2440_DMA) += dma.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
-obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-
-# extra machine support
-
-obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
deleted file mode 100644
index d1c29b2537c..00000000000
--- a/arch/arm/mach-s3c2440/clock.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div = (parent_rate / rate) / 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2440_camif_upll_round(clk, rate);
-
- camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
- if (rate != parent_rate) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
- .name = "camif",
- .id = -1,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
- .name = "camif-upll",
- .id = -1,
- .set_rate = s3c2440_camif_upll_setrate,
- .round_rate = s3c2440_camif_upll_round,
-};
-
-static struct clk s3c2440_clk_ac97 = {
- .name = "ac97",
- .id = -1,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static int s3c2440_clk_add(struct sys_device *sysdev)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2440_clk_cam.parent = clock_h;
- s3c2440_clk_ac97.parent = clock_p;
- s3c2440_clk_cam_upll.parent = clock_upll;
-
- s3c24xx_register_clock(&s3c2440_clk_ac97);
- s3c24xx_register_clock(&s3c2440_clk_cam);
- s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-
- clk_disable(&s3c2440_clk_ac97);
- clk_disable(&s3c2440_clk_cam);
-
- return 0;
-}
-
-static struct sysdev_driver s3c2440_clk_driver = {
- .add = s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_driver(void)
-{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
-}
-
-arch_initcall(s3c24xx_clk_driver);
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
deleted file mode 100644
index e08e081430f..00000000000
--- a/arch/arm/mach-s3c2440/dma.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/dma-plat.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
-#include <plat/regs-iis.h>
-#include <plat/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
- [DMACH_XD0] = {
- .name = "xdreq0",
- .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
- },
- [DMACH_XD1] = {
- .name = "xdreq1",
- .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
- },
- [DMACH_SDI] = {
- .name = "sdi",
- .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
- .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_SPI0] = {
- .name = "spi0",
- .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
- },
- [DMACH_SPI1] = {
- .name = "spi1",
- .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
- },
- [DMACH_UART0] = {
- .name = "uart0",
- .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
- },
- [DMACH_UART1] = {
- .name = "uart1",
- .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
- },
- [DMACH_UART2] = {
- .name = "uart2",
- .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
- },
- [DMACH_TIMER] = {
- .name = "timer",
- .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
- },
- [DMACH_I2S_IN] = {
- .name = "i2s-sdi",
- .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_I2S_OUT] = {
- .name = "i2s-sdo",
- .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_PCM_IN] = {
- .name = "pcm-in",
- .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
- .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
- },
- [DMACH_PCM_OUT] = {
- .name = "pcm-out",
- .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
- .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
- },
- [DMACH_MIC_IN] = {
- .name = "mic-in",
- .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
- .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
- },
- [DMACH_USB_EP1] = {
- .name = "usb-ep1",
- .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
- },
- [DMACH_USB_EP2] = {
- .name = "usb-ep2",
- .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
- },
- [DMACH_USB_EP3] = {
- .name = "usb-ep3",
- .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
- },
- [DMACH_USB_EP4] = {
- .name = "usb-ep4",
- .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
- },
-};
-
-static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
- struct s3c24xx_dma_map *map)
-{
- chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
- .select = s3c2440_dma_select,
- .dcon_mask = 7 << 24,
- .map = s3c2440_dma_mappings,
- .map_size = ARRAY_SIZE(s3c2440_dma_mappings),
-};
-
-static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
- .channels = {
- [DMACH_SDI] = {
- .list = {
- [0] = 3 | DMA_CH_VALID,
- [1] = 2 | DMA_CH_VALID,
- [2] = 1 | DMA_CH_VALID,
- [3] = 0 | DMA_CH_VALID,
- },
- },
- [DMACH_I2S_IN] = {
- .list = {
- [0] = 1 | DMA_CH_VALID,
- [1] = 2 | DMA_CH_VALID,
- },
- },
- [DMACH_I2S_OUT] = {
- .list = {
- [0] = 2 | DMA_CH_VALID,
- [1] = 1 | DMA_CH_VALID,
- },
- },
- [DMACH_PCM_IN] = {
- .list = {
- [0] = 2 | DMA_CH_VALID,
- [1] = 1 | DMA_CH_VALID,
- },
- },
- [DMACH_PCM_OUT] = {
- .list = {
- [0] = 1 | DMA_CH_VALID,
- [1] = 3 | DMA_CH_VALID,
- },
- },
- [DMACH_MIC_IN] = {
- .list = {
- [0] = 3 | DMA_CH_VALID,
- [1] = 2 | DMA_CH_VALID,
- },
- },
- },
-};
-
-static int __init s3c2440_dma_add(struct sys_device *sysdev)
-{
- s3c2410_dma_init();
- s3c24xx_dma_order_set(&s3c2440_dma_order);
- return s3c24xx_dma_init_map(&s3c2440_dma_sel);
-}
-
-static struct sysdev_driver s3c2440_dma_driver = {
- .add = s3c2440_dma_add,
-};
-
-static int __init s3c2440_dma_init(void)
-{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
-}
-
-arch_initcall(s3c2440_dma_init);
-
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
deleted file mode 100644
index 55404427277..00000000000
--- a/arch/arm/mach-s3c2440/dsc.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c2440.h>
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
- void __iomem *base;
- unsigned long val;
- unsigned long flags;
- unsigned long mask;
-
- base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
- mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
- local_irq_save(flags);
-
- val = __raw_readl(base);
- val &= ~mask;
- val |= value & mask;
- __raw_writel(val, base);
-
- local_irq_restore(flags);
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
deleted file mode 100644
index 0c049b95c37..00000000000
--- a/arch/arm/mach-s3c2440/irq.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .mask = s3c_irq_wdtac97_mask,
- .unmask = s3c_irq_wdtac97_unmask,
- .ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct sys_device *sysdev)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
- set_irq_handler(IRQ_WDT, handle_level_irq);
- set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- set_irq_chip(irqno, &s3c_irq_wdtac97);
- set_irq_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct sysdev_driver s3c2440_irq_driver = {
- .add = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
deleted file mode 100644
index 62a4c3eba97..00000000000
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-anubis.c
- *
- * Copyright 2003-2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <net/ax88796.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/audio-simtec.h>
-
-#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
- /* ISA IO areas */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(0x0),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(0x0),
- .length = SZ_4M,
- .type = MT_DEVICE,
- },
-
- /* we could possibly compress the next set down into a set of smaller tables
- * pagetables, but that would mean using an L2 section, and it still means
- * we cannot actually feed the same register to an LDR due to 16K spacing
- */
-
- /* CPLD control registers */
-
- {
- .virtual = (u32)ANUBIS_VA_CTRL1,
- .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)ANUBIS_VA_IDREG,
- .pfn = __phys_to_pfn(ANUBIS_PA_IDREG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clocks = anubis_serial_clocks,
- .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
- },
- [1] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clocks = anubis_serial_clocks,
- .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
- },
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[] = { 2 };
-static int chip0_map[] = { 0 };
-static int chip1_map[] = { 1 };
-
-static struct mtd_partition __initdata anubis_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_16K,
- .offset = SZ_16K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_128K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_128K,
- .offset = SZ_128K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
- [1] = {
- .name = "External",
- .nr_chips = 1,
- .nr_map = external_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
- [0] = {
- .name = "chip0",
- .nr_chips = 1,
- .nr_map = chip0_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
- [2] = {
- .name = "chip1",
- .nr_chips = 1,
- .nr_map = chip1_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
- unsigned int tmp;
-
- slot = set->nr_map[slot] & 3;
-
- pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
- slot, set, set->nr_map);
-
- tmp = __raw_readb(ANUBIS_VA_CTRL1);
- tmp &= ~ANUBIS_CTRL1_NANDSEL;
- tmp |= slot;
-
- pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
- __raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand __initdata anubis_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(anubis_nand_sets),
- .sets = anubis_nand_sets,
- .select_chip = anubis_nand_select,
-};
-
-/* IDE channels */
-
-static struct pata_platform_info anubis_ide_platdata = {
- .ioport_shift = 5,
-};
-
-static struct resource anubis_ide0_resource[] = {
- {
- .start = S3C2410_CS3,
- .end = S3C2410_CS3 + (8*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = S3C2410_CS3 + (1<<26) + (6*32),
- .end = S3C2410_CS3 + (1<<26) + (7*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_IDE0,
- .end = IRQ_IDE0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device anubis_device_ide0 = {
- .name = "pata_platform",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_ide0_resource),
- .resource = anubis_ide0_resource,
- .dev = {
- .platform_data = &anubis_ide_platdata,
- .coherent_dma_mask = ~0,
- },
-};
-
-static struct resource anubis_ide1_resource[] = {
- {
- .start = S3C2410_CS4,
- .end = S3C2410_CS4 + (8*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = S3C2410_CS4 + (1<<26) + (6*32),
- .end = S3C2410_CS4 + (1<<26) + (7*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_IDE0,
- .end = IRQ_IDE0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device anubis_device_ide1 = {
- .name = "pata_platform",
- .id = 1,
- .num_resources = ARRAY_SIZE(anubis_ide1_resource),
- .resource = anubis_ide1_resource,
- .dev = {
- .platform_data = &anubis_ide_platdata,
- .coherent_dma_mask = ~0,
- },
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data anubis_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2,
- .dcr_val = 0x48,
- .rcr_val = 0x40,
-};
-
-static struct resource anubis_asix_resource[] = {
- [0] = {
- .start = S3C2410_CS5,
- .end = S3C2410_CS5 + (0x20 * 0x20) -1,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = IRQ_ASIX,
- .end = IRQ_ASIX,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct platform_device anubis_device_asix = {
- .name = "ax88796",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_asix_resource),
- .resource = anubis_asix_resource,
- .dev = {
- .platform_data = &anubis_asix_platdata,
- }
-};
-
-/* SM501 */
-
-static struct resource anubis_sm501_resource[] = {
- [0] = {
- .start = S3C2410_CS2,
- .end = S3C2410_CS2 + SZ_8M,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = S3C2410_CS2 + SZ_64M - SZ_2M,
- .end = S3C2410_CS2 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_EINT0,
- .end = IRQ_EINT0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sm501_initdata anubis_sm501_initdata = {
- .gpio_high = {
- .set = 0x3F000000, /* 24bit panel */
- .mask = 0x0,
- },
- .misc_timing = {
- .set = 0x010100, /* SDRAM timing */
- .mask = 0x1F1F00,
- },
- .misc_control = {
- .set = SM501_MISC_PNL_24BIT,
- .mask = 0,
- },
-
- .devices = SM501_USE_GPIO,
-
- /* set the SDRAM and bus clocks */
- .mclk = 72 * MHZ,
- .m1xclk = 144 * MHZ,
-};
-
-static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
- [0] = {
- .bus_num = 1,
- .pin_scl = 44,
- .pin_sda = 45,
- },
- [1] = {
- .bus_num = 2,
- .pin_scl = 40,
- .pin_sda = 41,
- },
-};
-
-static struct sm501_platdata anubis_sm501_platdata = {
- .init = &anubis_sm501_initdata,
- .gpio_base = -1,
- .gpio_i2c = anubis_sm501_gpio_i2c,
- .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
-};
-
-static struct platform_device anubis_device_sm501 = {
- .name = "sm501",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_sm501_resource),
- .resource = anubis_sm501_resource,
- .dev = {
- .platform_data = &anubis_sm501_platdata,
- },
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
- &s3c_device_usb,
- &s3c_device_wdt,
- &s3c_device_adc,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_nand,
- &anubis_device_ide0,
- &anubis_device_ide1,
- &anubis_device_asix,
- &anubis_device_sm501,
-};
-
-static struct clk *anubis_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info anubis_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tps65011", 0x48),
- .irq = IRQ_EINT20,
- }
-};
-
-/* Audio setup */
-static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
- .have_mic = 1,
- .have_lout = 1,
- .output_cdclk = 1,
- .use_mpllin = 1,
- .amp_gpio = S3C2410_GPB(2),
- .amp_gain[0] = S3C2410_GPD(10),
- .amp_gain[1] = S3C2410_GPD(11),
-};
-
-static void __init anubis_map_io(void)
-{
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
- s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
- s3c24xx_init_clocks(0);
- s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-
- /* check for the newer revision boards with large page nand */
-
- if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
- printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
- __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
- anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
- anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
- } else {
- /* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
- }
-}
-
-static void __init anubis_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&anubis_nand_info);
- simtec_audio_add(NULL, false, &anubis_audio);
-
- platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
-
- i2c_register_board_info(0, anubis_i2c_devs,
- ARRAY_SIZE(anubis_i2c_devs));
-}
-
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .phys_io = S3C2410_PA_UART,
- .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C2410_SDRAM_PA + 0x100,
- .map_io = anubis_map_io,
- .init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
deleted file mode 100644
index aa69290e04c..00000000000
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- * and modifications by SBZ <sbz@spgui.org> and
- * Weibing <http://weibing.blogbus.com>
- *
- * For product information, visit http://www.arm9e.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/mci.h>
-
-static struct map_desc at2440evb_iodesc[] __initdata = {
- /* Nothing here */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
-static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clocks = at2440evb_serial_clocks,
- .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clocks = at2440evb_serial_clocks,
- .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
- },
-};
-
-/* NAND Flash on AT2440EVB board */
-
-static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_256K,
- .offset = 0,
- },
- [1] = {
- .name = "Kernel",
- .size = SZ_2M,
- .offset = SZ_256K,
- },
- [2] = {
- .name = "Root",
- .offset = SZ_256K + SZ_2M,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part),
- .partitions = at2440evb_default_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
- .sets = at2440evb_nand_sets,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource at2440evb_dm9k_resource[] = {
- [0] = {
- .start = S3C2410_CS3,
- .end = S3C2410_CS3 + 3,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = S3C2410_CS3 + 4,
- .end = S3C2410_CS3 + 7,
- .flags = IORESOURCE_MEM
- },
- [2] = {
- .start = IRQ_EINT7,
- .end = IRQ_EINT7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct dm9000_plat_data at2440evb_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device at2440evb_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource),
- .resource = at2440evb_dm9k_resource,
- .dev = {
- .platform_data = &at2440evb_dm9k_pdata,
- },
-};
-
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
- .gpio_detect = S3C2410_GPG(10),
-};
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
-
- .width = 800,
- .height = 480,
-
- .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */
- .xres = 800,
- .yres = 480,
- .bpp = 16,
- .left_margin = 88,
- .right_margin = 40,
- .hsync_len = 128,
- .upper_margin = 32,
- .lower_margin = 11,
- .vsync_len = 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
- .displays = &at2440evb_lcd_cfg,
- .num_displays = 1,
- .default_display = 0,
-};
-
-static struct platform_device *at2440evb_devices[] __initdata = {
- &s3c_device_usb,
- &s3c_device_wdt,
- &s3c_device_adc,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c_device_lcd,
- &at2440evb_device_eth,
-};
-
-static void __init at2440evb_map_io(void)
-{
- s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
-
- s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
- s3c24xx_init_clocks(16934400);
- s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
-}
-
-static void __init at2440evb_init(void)
-{
- s3c24xx_fb_set_platdata(&at2440evb_fb_info);
- s3c_nand_set_platdata(&at2440evb_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
-}
-
-
-MACHINE_START(AT2440EVB, "AT2440EVB")
- .phys_io = S3C2410_PA_UART,
- .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C2410_SDRAM_PA + 0x100,
- .map_io = at2440evb_map_io,
- .init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
deleted file mode 100644
index 2068e9096a4..00000000000
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ /dev/null
@@ -1,704 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- * and modifications by SBZ <sbz@spgui.org> and
- * Weibing <http://weibing.blogbus.com> and
- * Michel Pollet <buserror@gmail.com>
- *
- * For product information, visit http://code.google.com/p/mini2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/i2c/at24.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <sound/s3c24xx_uda134x.h>
-
-#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-
-static struct map_desc mini2440_iodesc[] __initdata = {
- /* nothing to declare, move along */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-/* USB device UDC support */
-
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
- pr_debug("udc: pullup(%d)\n", cmd);
-
- switch (cmd) {
- case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
- break;
- case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
- break;
- case S3C2410_UDC_P_RESET :
- break;
- default:
- break;
- }
-}
-
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
- .udc_command = mini2440_udc_pullup,
-};
-
-
-/* LCD timing and setup */
-
-/*
- * This macro simplifies the table bellow
- */
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
- _yres,margin_top,margin_bottom,vsync, refresh) \
- .width = _xres, \
- .xres = _xres, \
- .height = _yres, \
- .yres = _yres, \
- .left_margin = margin_left, \
- .right_margin = margin_right, \
- .upper_margin = margin_top, \
- .lower_margin = margin_bottom, \
- .hsync_len = hsync, \
- .vsync_len = vsync, \
- .pixclock = ((_clock*100000000000LL) / \
- ((refresh) * \
- (hsync + margin_left + _xres + margin_right) * \
- (vsync + margin_top + _yres + margin_bottom))), \
- .bpp = 16,\
- .type = (S3C2410_LCDCON1_TFT16BPP |\
- S3C2410_LCDCON1_TFT)
-
-static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
- [0] = { /* mini2440 + 3.5" TFT + touchscreen */
- _LCD_DECLARE(
- 7, /* The 3.5 is quite fast */
- 240, 21, 38, 6, /* x timing */
- 320, 4, 4, 2, /* y timing */
- 60), /* refresh rate */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_INVVDEN |
- S3C2410_LCDCON5_PWREN),
- },
- [1] = { /* mini2440 + 7" TFT + touchscreen */
- _LCD_DECLARE(
- 10, /* the 7" runs slower */
- 800, 40, 40, 48, /* x timing */
- 480, 29, 3, 3, /* y timing */
- 50), /* refresh rate */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN),
- },
- /* The VGA shield can outout at several resolutions. All share
- * the same timings, however, anything smaller than 1024x768
- * will only be displayed in the top left corner of a 1024x768
- * XGA output unless you add optional dip switches to the shield.
- * Therefore timings for other resolutions have been ommited here.
- */
- [2] = {
- _LCD_DECLARE(
- 10,
- 1024, 1, 2, 2, /* y timing */
- 768, 200, 16, 16, /* x timing */
- 24), /* refresh rate, maximum stable,
- tested with the FPGA shield */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_HWSWP),
- },
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
- .displays = &mini2440_lcd_cfg[0], /* not constant! see init */
- .num_displays = 1,
- .default_display = 0,
-
- /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
- * and disable the pull down resistors on pins we are using for LCD
- * data. */
-
- .gpcup = (0xf << 1) | (0x3f << 10),
-
- .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
- S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
- S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
- S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
- S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
-
- .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
- S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
- S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
- S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
- S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
- .gpdup = (0x3f << 2) | (0x3f << 10),
-
- .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
- S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
- S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
- S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
- S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
- S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
- .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
- S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
- S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
- S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
- S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
- S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-};
-
-/* MMC/SD */
-
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = NULL,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-/* NAND Flash on MINI2440 board */
-
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
- [0] = {
- .name = "u-boot",
- .size = SZ_256K,
- .offset = 0,
- },
- [1] = {
- .name = "u-boot-env",
- .size = SZ_128K,
- .offset = SZ_256K,
- },
- [2] = {
- .name = "kernel",
- /* 5 megabytes, for a kernel with no modules
- * or a uImage with a ramdisk attached */
- .size = 0x00500000,
- .offset = SZ_256K + SZ_128K,
- },
- [3] = {
- .name = "root",
- .offset = SZ_256K + SZ_128K + 0x00500000,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
- .partitions = mini2440_default_nand_part,
- .flash_bbt = 1, /* we use u-boot to create a BBT */
- },
-};
-
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
- .tacls = 0,
- .twrph0 = 25,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(mini2440_nand_sets),
- .sets = mini2440_nand_sets,
- .ignore_unset_ecc = 1,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini2440_dm9k_resource[] = {
- [0] = {
- .start = MACH_MINI2440_DM9K_BASE,
- .end = MACH_MINI2440_DM9K_BASE + 3,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = MACH_MINI2440_DM9K_BASE + 4,
- .end = MACH_MINI2440_DM9K_BASE + 7,
- .flags = IORESOURCE_MEM
- },
- [2] = {
- .start = IRQ_EINT7,
- .end = IRQ_EINT7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-/*
- * The DM9000 has no eeprom, and it's MAC address is set by
- * the bootloader before starting the kernel.
- */
-static struct dm9000_plat_data mini2440_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini2440_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
- .resource = mini2440_dm9k_resource,
- .dev = {
- .platform_data = &mini2440_dm9k_pdata,
- },
-};
-
-/* CON5
- * +--+ /-----\
- * | | | |
- * | | | BAT |
- * | | \_____/
- * | |
- * | | +----+ +----+
- * | | | K5 | | K1 |
- * | | +----+ +----+
- * | | +----+ +----+
- * | | | K4 | | K2 |
- * | | +----+ +----+
- * | | +----+ +----+
- * | | | K6 | | K3 |
- * | | +----+ +----+
- * .....
- */
-static struct gpio_keys_button mini2440_buttons[] = {
- {
- .gpio = S3C2410_GPG(0), /* K1 */
- .code = KEY_F1,
- .desc = "Button 1",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(3), /* K2 */
- .code = KEY_F2,
- .desc = "Button 2",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(5), /* K3 */
- .code = KEY_F3,
- .desc = "Button 3",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(6), /* K4 */
- .code = KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(7), /* K5 */
- .code = KEY_F5,
- .desc = "Button 5",
- .active_low = 1,
- },
-#if 0
- /* this pin is also known as TCLK1 and seems to already
- * marked as "in use" somehow in the kernel -- possibly wrongly */
- {
- .gpio = S3C2410_GPG(11), /* K6 */
- .code = KEY_F6,
- .desc = "Button 6",
- .active_low = 1,
- },
-#endif
-};
-
-static struct gpio_keys_platform_data mini2440_button_data = {
- .buttons = mini2440_buttons,
- .nbuttons = ARRAY_SIZE(mini2440_buttons),
-};
-
-static struct platform_device mini2440_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mini2440_button_data,
- }
-};
-
-/* LEDS */
-
-static struct s3c24xx_led_platdata mini2440_led1_pdata = {
- .name = "led1",
- .gpio = S3C2410_GPB(5),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "heartbeat",
-};
-
-static struct s3c24xx_led_platdata mini2440_led2_pdata = {
- .name = "led2",
- .gpio = S3C2410_GPB(6),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "nand-disk",
-};
-
-static struct s3c24xx_led_platdata mini2440_led3_pdata = {
- .name = "led3",
- .gpio = S3C2410_GPB(7),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "mmc0",
-};
-
-static struct s3c24xx_led_platdata mini2440_led4_pdata = {
- .name = "led4",
- .gpio = S3C2410_GPB(8),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "",
-};
-
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
- .name = "backlight",
- .gpio = S3C2410_GPG(4),
- .def_trigger = "backlight",
-};
-
-static struct platform_device mini2440_led1 = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &mini2440_led1_pdata,
- },
-};
-
-static struct platform_device mini2440_led2 = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &mini2440_led2_pdata,
- },
-};
-
-static struct platform_device mini2440_led3 = {
- .name = "s3c24xx_led",
- .id = 3,
- .dev = {
- .platform_data = &mini2440_led3_pdata,
- },
-};
-
-static struct platform_device mini2440_led4 = {
- .name = "s3c24xx_led",
- .id = 4,
- .dev = {
- .platform_data = &mini2440_led4_pdata,
- },
-};
-
-static struct platform_device mini2440_led_backlight = {
- .name = "s3c24xx_led",
- .id = 5,
- .dev = {
- .platform_data = &mini2440_led_backlight_pdata,
- },
-};
-
-/* AUDIO */
-
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
- .l3_clk = S3C2410_GPB(4),
- .l3_mode = S3C2410_GPB(2),
- .l3_data = S3C2410_GPB(3),
- .model = UDA134X_UDA1341
-};
-
-static struct platform_device mini2440_audio = {
- .name = "s3c24xx_uda134x",
- .id = 0,
- .dev = {
- .platform_data = &mini2440_audio_pins,
- },
-};
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c08 = {
- .byte_len = SZ_8K / 8,
- .page_size = 16,
-};
-
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("24c08", 0x50),
- .platform_data = &at24c08,
- },
-};
-
-static struct platform_device *mini2440_devices[] __initdata = {
- &s3c_device_usb,
- &s3c_device_wdt,
-/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_usbgadget,
- &mini2440_device_eth,
- &mini2440_led1,
- &mini2440_led2,
- &mini2440_led3,
- &mini2440_led4,
- &mini2440_button_device,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c_device_iis,
- &mini2440_audio,
-/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */
- /* remaining devices are optional */
-};
-
-static void __init mini2440_map_io(void)
-{
- s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-
- s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
-}
-
-/*
- * mini2440_features string
- *
- * t = Touchscreen present
- * b = backlight control
- * c = camera [TODO]
- * 0-9 LCD configuration
- *
- */
-static char mini2440_features_str[12] __initdata = "0tb";
-
-static int __init mini2440_features_setup(char *str)
-{
- if (str)
- strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
- return 1;
-}
-
-__setup("mini2440=", mini2440_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-#define FEATURE_BACKLIGHT (1 << 1)
-#define FEATURE_TOUCH (1 << 2)
-#define FEATURE_CAMERA (1 << 3)
-
-struct mini2440_features_t {
- int count;
- int done;
- int lcd_index;
- struct platform_device *optional[8];
-};
-
-static void mini2440_parse_features(
- struct mini2440_features_t * features,
- const char * features_str )
-{
- const char * fp = features_str;
-
- features->count = 0;
- features->done = 0;
- features->lcd_index = -1;
-
- while (*fp) {
- char f = *fp++;
-
- switch (f) {
- case '0'...'9': /* tft screen */
- if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "screen type already set\n", f);
- } else {
- int li = f - '0';
- if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
- printk(KERN_INFO "MINI2440: "
- "'%c' out of range LCD mode\n", f);
- else {
- features->optional[features->count++] =
- &s3c_device_lcd;
- features->lcd_index = li;
- }
- }
- features->done |= FEATURE_SCREEN;
- break;
- case 'b':
- if (features->done & FEATURE_BACKLIGHT)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "backlight already set\n", f);
- else {
- features->optional[features->count++] =
- &mini2440_led_backlight;
- }
- features->done |= FEATURE_BACKLIGHT;
- break;
- case 't':
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "touchscreen not compiled in\n", f);
- break;
- case 'c':
- if (features->done & FEATURE_CAMERA)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "camera already registered\n", f);
- else
- features->optional[features->count++] =
- &s3c_device_camif;
- features->done |= FEATURE_CAMERA;
- break;
- }
- }
-}
-
-static void __init mini2440_init(void)
-{
- struct mini2440_features_t features = { 0 };
- int i;
-
- printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
- mini2440_features_str);
-
- /* Parse the feature string */
- mini2440_parse_features(&features, mini2440_features_str);
-
- /* turn LCD on */
- s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
-
- /* Turn the backlight early on */
- s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
- s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT);
-
- /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
- s3c2410_gpio_pullup(S3C2410_GPB(1), 0);
- s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
- s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
-
- /* Make sure the D+ pullup pin is output */
- s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
-
- /* mark the key as input, without pullups (there is one on the board) */
- for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
- s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0);
- s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio,
- S3C2410_GPIO_INPUT);
- }
- if (features.lcd_index != -1) {
- int li;
-
- mini2440_fb_info.displays =
- &mini2440_lcd_cfg[features.lcd_index];
-
- printk(KERN_INFO "MINI2440: LCD");
- for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
- if (li == features.lcd_index)
- printk(" [%d:%dx%d]", li,
- mini2440_lcd_cfg[li].width,
- mini2440_lcd_cfg[li].height);
- else
- printk(" %d:%dx%d", li,
- mini2440_lcd_cfg[li].width,
- mini2440_lcd_cfg[li].height);
- printk("\n");
- s3c24xx_fb_set_platdata(&mini2440_fb_info);
- }
-
- s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
- s3c_nand_set_platdata(&mini2440_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- i2c_register_board_info(0, mini2440_i2c_devs,
- ARRAY_SIZE(mini2440_i2c_devs));
-
- platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
-
- if (features.count) /* the optional features */
- platform_add_devices(features.optional, features.count);
-
-}
-
-
-MACHINE_START(MINI2440, "MINI2440")
- /* Maintainer: Michel Pollet <buserror@gmail.com> */
- .phys_io = S3C2410_PA_UART,
- .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C2410_SDRAM_PA + 0x100,
- .map_io = mini2440_map_io,
- .init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
deleted file mode 100644
index d43edede590..00000000000
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
- *
- * Copyright (c) 2004 Nex Vision
- * Guillaume GOURAT <guillaume.gourat@nexvision.tv>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- * 15-10-2004 GG Created initial version
- * 12-03-2005 BJD Updated for release
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
- /* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
- [0] = {
- .start = S3C2410_CS0,
- .end = S3C2410_CS0 + (8*1024*1024) - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct map_info nexcoder_nor_map = {
- .bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
- .name = "mtd-flash",
- .id = -1,
- .num_resources = ARRAY_SIZE(nexcoder_nor_resource),
- .resource = nexcoder_nor_resource,
- .dev =
- {
- .platform_data = &nexcoder_nor_map,
- }
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
- &s3c_device_usb,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_rtc,
- &s3c_device_camif,
- &s3c_device_spi0,
- &s3c_device_spi1,
- &nexcoder_device_nor,
-};
-
-static void __init nexcoder_sensorboard_init(void)
-{
- // Initialize SCCB bus
- s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
- s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
- s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
-
- // Power up the sensor board
- s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
- s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
- s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
-}
-
-static void __init nexcoder_map_io(void)
-{
- s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
- s3c24xx_init_clocks(0);
- s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-
- nexcoder_sensorboard_init();
-}
-
-static void __init nexcoder_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
-};
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
- /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .phys_io = S3C2410_PA_UART,
- .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C2410_SDRAM_PA + 0x100,
- .map_io = nexcoder_map_io,
- .init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
deleted file mode 100644
index ad2792dfbee..00000000000
--- a/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
- *
- * Copyright (c) 2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Osiris Dynamic Voltage Scaling support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/gpio.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <plat/cpu-freq.h>
-
-#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
-
-static bool dvs_en;
-
-static void osiris_dvs_tps_setdvs(bool on)
-{
- unsigned vregs1 = 0, vdcdc2 = 0;
-
- if (!on) {
- vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
- vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */
- }
-
- dvs_en = on;
- vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
- vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
-
- tps65010_config_vregs1(vregs1);
- tps65010_config_vdcdc2(vdcdc2);
-}
-
-static bool is_dvs(struct s3c_freq *f)
-{
- /* at the moment, we assume ARMCLK = HCLK => DVS */
- return f->armclk == f->hclk;
-}
-
-/* keep track of current state */
-static bool cur_dvs = false;
-
-static int osiris_dvs_notify(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- struct cpufreq_freqs *cf = data;
- struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
- bool old_dvs = is_dvs(&freqs->old);
- bool new_dvs = is_dvs(&freqs->new);
- int ret = 0;
-
- if (!dvs_en)
- return 0;
-
- printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
- freqs->old.armclk, freqs->old.hclk,
- freqs->new.armclk, freqs->new.hclk);
-
- switch (val) {
- case CPUFREQ_PRECHANGE:
- if (old_dvs & !new_dvs ||
- cur_dvs & !new_dvs) {
- pr_debug("%s: exiting dvs\n", __func__);
- cur_dvs = false;
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- }
- break;
- case CPUFREQ_POSTCHANGE:
- if (!old_dvs & new_dvs ||
- !cur_dvs & new_dvs) {
- pr_debug("entering dvs\n");
- cur_dvs = true;
- gpio_set_value(OSIRIS_GPIO_DVS, 0);
- }
- break;
- }
-
- return ret;
-}
-
-static struct notifier_block osiris_dvs_nb = {
- .notifier_call = osiris_dvs_notify,
-};
-
-static int __devinit osiris_dvs_probe(struct platform_device *pdev)
-{
- int ret;
-
- dev_info(&pdev->dev, "initialising\n");
-
- ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
- if (ret) {
- dev_err(&pdev->dev, "cannot claim gpio\n");
- goto err_nogpio;
- }
-
- /* start with dvs disabled */
- gpio_direction_output(OSIRIS_GPIO_DVS, 1);
-
- ret = cpufreq_register_notifier(&osiris_dvs_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
- if (ret) {
- dev_err(&pdev->dev, "failed to register with cpufreq\n");
- goto err_nofreq;
- }
-
- osiris_dvs_tps_setdvs(true);
-
- return 0;
-
-err_nofreq:
- gpio_free(OSIRIS_GPIO_DVS);
-
-err_nogpio:
- return ret;
-}
-
-static int __devexit osiris_dvs_remove(struct platform_device *pdev)
-{
- dev_info(&pdev->dev, "exiting\n");
-
- /* disable any current dvs */
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- osiris_dvs_tps_setdvs(false);
-
- cpufreq_unregister_notifier(&osiris_dvs_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-
- gpio_free(OSIRIS_GPIO_DVS);
-
- return 0;
-}
-
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
- * out if the configuration isn't set. */
-
-static int osiris_dvs_suspend(struct device *dev)
-{
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- osiris_dvs_tps_setdvs(false);
- cur_dvs = false;
-
- return 0;
-}
-
-static int osiris_dvs_resume(struct device *dev)
-{
- osiris_dvs_tps_setdvs(true);
- return 0;
-}
-
-static const struct dev_pm_ops osiris_dvs_pm = {
- .suspend = osiris_dvs_suspend,
- .resume = osiris_dvs_resume,
-};
-
-static struct platform_driver osiris_dvs_driver = {
- .probe = osiris_dvs_probe,
- .remove = __devexit_p(osiris_dvs_remove),
- .driver = {
- .name = "osiris-dvs",
- .owner = THIS_MODULE,
- .pm = &osiris_dvs_pm,
- },
-};
-
-static int __init osiris_dvs_init(void)
-{
- return platform_driver_register(&osiris_dvs_driver);
-}
-
-static void __exit osiris_dvs_exit(void)
-{
- platform_driver_unregister(&osiris_dvs_driver);
-}
-
-module_init(osiris_dvs_init);
-module_exit(osiris_dvs_exit);
-
-MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
deleted file mode 100644
index f35371db33f..00000000000
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
- * Copyright (c) 2005-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-/* onboard perihperal map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
- /* ISA IO areas (may be over-written later) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS5),
- .length = SZ_16M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS5),
- .length = SZ_16M,
- .type = MT_DEVICE,
- },
-
- /* CPLD control registers */
-
- {
- .virtual = (u32)OSIRIS_VA_CTRL0,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_CTRL1,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_CTRL2,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_IDREG,
- .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
- }
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[] = { 2 };
-static int chip0_map[] = { 0 };
-static int chip1_map[] = { 1 };
-
-static struct mtd_partition __initdata osiris_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_16K,
- .offset = SZ_16K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_128K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_128K,
- .offset = SZ_128K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
- [1] = {
- .name = "External",
- .nr_chips = 1,
- .nr_map = external_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
- [0] = {
- .name = "chip0",
- .nr_chips = 1,
- .nr_map = chip0_map,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
- [2] = {
- .name = "chip1",
- .nr_chips = 1,
- .nr_map = chip1_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
- unsigned int tmp;
-
- slot = set->nr_map[slot] & 3;
-
- pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
- slot, set, set->nr_map);
-
- tmp = __raw_readb(OSIRIS_VA_CTRL0);
- tmp &= ~OSIRIS_CTRL0_NANDSEL;
- tmp |= slot;
-
- pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
-
- __raw_writeb(tmp, OSIRIS_VA_CTRL0);
-}
-
-static struct s3c2410_platform_nand __initdata osiris_nand_info = {
- .tacls = 25,
- .twrph0 = 60,
- .twrph1 = 60,
- .nr_sets = ARRAY_SIZE(osiris_nand_sets),
- .sets = osiris_nand_sets,
- .select_chip = osiris_nand_select,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
- [0] = {
- .start = 0x0f000000,
- .end = 0x0f100000,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x0c000000,
- .end = 0x0c100000,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device osiris_pcmcia = {
- .name = "osiris-pcmcia",
- .id = -1,
- .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
- .resource = osiris_pcmcia_resource,
-};
-
-/* Osiris power management device */
-
-#ifdef CONFIG_PM
-static unsigned char pm_osiris_ctrl0;
-
-static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
-{
- unsigned int tmp;
-
- pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
- tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
-
- /* ensure correct NAND slot is selected on resume */
- if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
- tmp |= 2;
-
- __raw_writeb(tmp, OSIRIS_VA_CTRL0);
-
- /* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
-
- return 0;
-}
-
-static int osiris_pm_resume(struct sys_device *sd)
-{
- if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
- __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
-
- __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
-
- s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-
- return 0;
-}
-
-#else
-#define osiris_pm_suspend NULL
-#define osiris_pm_resume NULL
-#endif
-
-static struct sysdev_class osiris_pm_sysclass = {
- .name = "mach-osiris",
- .suspend = osiris_pm_suspend,
- .resume = osiris_pm_resume,
-};
-
-static struct sys_device osiris_pm_sysdev = {
- .cls = &osiris_pm_sysclass,
-};
-
-/* Link for DVS driver to TPS65011 */
-
-static void osiris_tps_release(struct device *dev)
-{
- /* static device, do not need to release anything */
-}
-
-static struct platform_device osiris_tps_device = {
- .name = "osiris-dvs",
- .id = -1,
- .dev.release = osiris_tps_release,
-};
-
-static int osiris_tps_setup(struct i2c_client *client, void *context)
-{
- osiris_tps_device.dev.parent = &client->dev;
- return platform_device_register(&osiris_tps_device);
-}
-
-static int osiris_tps_remove(struct i2c_client *client, void *context)
-{
- platform_device_unregister(&osiris_tps_device);
- return 0;
-}
-
-static struct tps65010_board osiris_tps_board = {
- .base = -1, /* GPIO can go anywhere at the moment */
- .setup = osiris_tps_setup,
- .teardown = osiris_tps_remove,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info osiris_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tps65011", 0x48),
- .irq = IRQ_EINT20,
- .platform_data = &osiris_tps_board,
- },
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
- &s3c_device_i2c0,
- &s3c_device_wdt,
- &s3c_device_nand,
- &osiris_pcmcia,
-};
-
-static struct clk *osiris_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
-static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
- .refresh = 7800, /* refresh period is 7.8usec */
- .auto_io = 1,
- .need_io = 1,
-};
-
-static void __init osiris_map_io(void)
-{
- unsigned long flags;
-
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
- s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
- s3c24xx_init_clocks(0);
- s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-
- /* check for the newer revision boards with large page nand */
-
- if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
- printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
- __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
- osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
- osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
- } else {
- /* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
- }
-
- /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
- local_irq_save(flags);
- __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
- local_irq_restore(flags);
-}
-
-static void __init osiris_init(void)
-{
- sysdev_class_register(&osiris_pm_sysclass);
- sysdev_register(&osiris_pm_sysdev);
-
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&osiris_nand_info);
-
- s3c_cpufreq_setboard(&osiris_cpufreq);
-
- i2c_register_board_info(0, osiris_i2c_devs,
- ARRAY_SIZE(osiris_i2c_devs));
-
- platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
-};
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .phys_io = S3C2410_PA_UART,
- .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C2410_SDRAM_PA + 0x100,
- .map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
- .init_machine = osiris_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
deleted file mode 100644
index a952a13afb1..00000000000
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.handhelds.org/projects/rx3715.html
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/sysdev.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/h1940.h>
-#include <plat/nand.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-static struct map_desc rx3715_iodesc[] __initdata = {
- /* dump ISA space somewhere unused */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-
-static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
- [0] = {
- .name = "fclk",
- .divisor = 0,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x00,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .uart_flags = UPF_CONS_FLOW,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
- }
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
- .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
-
- .pixclock = 260000,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 36,
- .right_margin = 36,
- .hsync_len = 8,
- .upper_margin = 6,
- .lower_margin = 7,
- .vsync_len = 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
- .displays = &rx3715_lcdcfg,
- .num_displays = 1,
- .default_display = 0,
-
- .lpcsel = 0xf82,
-
- .gpccon = 0xaa955699,
- .gpccon_mask = 0xffc003cc,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
-
- .gpdcon = 0xaa95aaa1,
- .gpdcon_mask = 0xffc0fff0,
- .gpdup = 0x0000faff,
- .gpdup_mask = 0xffffffff,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
- [0] = {
- .name = "Whole Flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
- [0] = {
- .name = "Internal",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
- .partitions = rx3715_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
- .tacls = 25,
- .twrph0 = 50,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
- .sets = rx3715_nand_sets,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
- &s3c_device_usb,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
- s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
- s3c24xx_init_clocks(16934000);
- s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-}
-
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
- memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
- s3c_pm_init();
-
- s3c_nand_set_platdata(&rx3715_nand_info);
- s3c24xx_fb_set_platdata(&rx3715_fb_info);
- platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
- .phys_io = S3C2410_PA_UART,
- .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C2410_SDRAM_PA + 0x100,
- .map_io = rx3715_map_io,
- .init_irq = rx3715_init_irq,
- .init_machine = rx3715_init_machine,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
deleted file mode 100644
index ec13e748ccc..00000000000
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/idle.h>
-#include <mach/fb.h>
-#include <plat/iic.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
- /* ISA IO Space map (memory space selected by A24) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- }
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
-
- .width = 240,
- .height = 320,
-
- .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 20,
- .right_margin = 8,
- .hsync_len = 4,
- .upper_margin = 8,
- .lower_margin = 7,
- .vsync_len = 4,
-};
-
-static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
- .displays = &smdk2440_lcd_cfg,
- .num_displays = 1,
- .default_display = 0,
-
-#if 0
- /* currently setup by downloader */
- .gpccon = 0xaa940659,
- .gpccon_mask = 0xffffffff,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
- .gpdcon = 0xaa84aaa0,
- .gpdcon_mask = 0xffffffff,
- .gpdup = 0x0000faff,
- .gpdup_mask = 0xffffffff,
-#endif
-
- .lpcsel = ((0xCE6) & ~7) | 1<<4,
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
- &s3c_device_usb,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
-};
-
-static void __init smdk2440_map_io(void)
-{
- s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
- s3c24xx_init_clocks(16934400);
- s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-}
-
-static void __init smdk2440_machine_init(void)
-{
- s3c24xx_fb_set_platdata(&smdk2440_fb_info);
- s3c_i2c0_set_platdata(NULL);
-
- platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
- smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
- .phys_io = S3C2410_PA_UART,
- .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C2410_SDRAM_PA + 0x100,
-
- .init_irq = s3c24xx_init_irq,
- .map_io = smdk2440_map_io,
- .init_machine = smdk2440_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
deleted file mode 100644
index ac1f7ea5f40..00000000000
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/s3c2440.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/s3c2440.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct sys_device s3c2440_sysdev = {
- .cls = &s3c2440_sysclass,
-};
-
-int __init s3c2440_init(void)
-{
- printk("S3C2440: Initialising architecture\n");
-
- /* change irq for watchdog */
-
- s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
- s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
-
- /* register our system device for everything else */
-
- return sysdev_register(&s3c2440_sysdev);
-}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-13 16:34:57 +0000