diff options
Diffstat (limited to 'arch/arm/mach-realview/platsmp.c')
| -rw-r--r-- | arch/arm/mach-realview/platsmp.c | 201 |
1 files changed, 33 insertions, 168 deletions
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 009265818d5..98e3052b793 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -10,32 +10,20 @@ */ #include <linux/init.h> #include <linux/errno.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/localtimer.h> -#include <asm/unified.h> +#include <asm/smp_scu.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> #include <mach/board-pbx.h> -#include <asm/smp_scu.h> -#include "core.h" +#include <plat/platsmp.h> -extern void realview_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; +#include "core.h" static void __iomem *scu_base_addr(void) { @@ -50,172 +38,49 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0; } -static inline unsigned int get_core_count(void) -{ - void __iomem *scu_base = scu_base_addr(); - if (scu_base) - return scu_get_core_count(scu_base); - return 1; -} - -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - trace_hardirqs_off(); - - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_cpu_init(0, gic_cpu_base_addr); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - pen_release = -1; - smp_wmb(); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - pen_release = cpu; - flush_cache_all(); - - /* - * XXX - * - * This is a later addition to the booting protocol: the - * bootMonitor now puts secondary cores into WFI, so - * poke_milo() no longer gets the cores moving; we need - * to send a soft interrupt to wake the secondary core. - * Use smp_cross_call() for this, since there's little - * point duplicating the code here - */ - smp_cross_call(cpumask_of(cpu)); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - -static void __init poke_milo(void) -{ - /* nobody is to be released from the pen yet */ - pen_release = -1; - - /* - * Write the address of secondary startup into the system-wide flags - * register. The BootMonitor waits for this register to become - * non-zero. - */ - __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), - __io_address(REALVIEW_SYS_FLAGSSET)); - - mb(); -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ -void __init smp_init_cpus(void) +static void __init realview_smp_init_cpus(void) { - unsigned int i, ncores = get_core_count(); - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} + void __iomem *scu_base = scu_base_addr(); + unsigned int i, ncores; -void __init smp_prepare_cpus(unsigned int max_cpus) -{ - unsigned int ncores = get_core_count(); - unsigned int cpu = smp_processor_id(); - int i; + ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores == 0) { - printk(KERN_ERR - "Realview: strange CM count of 0? Default to 1\n"); - - ncores = 1; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "Realview: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; - } - - smp_store_cpu_info(cpu); + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} - /* - * are we trying to boot more cores than exist? - */ - if (max_cpus > ncores) - max_cpus = ncores; +static void __init realview_smp_prepare_cpus(unsigned int max_cpus) +{ - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); + scu_enable(scu_base_addr()); /* - * Initialise the SCU if there are more than one CPU and let - * them know where to start. Note that, on modern versions of - * MILO, the "poke" doesn't actually do anything until each - * individual core is sent a soft interrupt to get it out of - * WFI + * Write the address of secondary startup into the + * system-wide flags register. The BootMonitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. */ - if (max_cpus > 1) { - /* - * Enable the local timer or broadcast device for the - * boot CPU, but only if we have more than one CPU. - */ - percpu_timer_setup(); - - scu_enable(scu_base_addr()); - poke_milo(); - } + __raw_writel(virt_to_phys(versatile_secondary_startup), + __io_address(REALVIEW_SYS_FLAGSSET)); } + +struct smp_operations realview_smp_ops __initdata = { + .smp_init_cpus = realview_smp_init_cpus, + .smp_prepare_cpus = realview_smp_prepare_cpus, + .smp_secondary_init = versatile_secondary_init, + .smp_boot_secondary = versatile_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = realview_cpu_die, +#endif +}; |