diff options
Diffstat (limited to 'arch/arm/mach-pxa/zylonite.c')
| -rw-r--r-- | arch/arm/mach-pxa/zylonite.c | 173 |
1 files changed, 78 insertions, 95 deletions
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 8fca6d890b7..77daea478e8 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -18,26 +18,24 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/gpio.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware.h> -#include <asm/arch/audio.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/zylonite.h> -#include <asm/arch/mmc.h> -#include <asm/arch/pxa27x_keypad.h> -#include <asm/arch/pxa3xx_nand.h> +#include <mach/pxa3xx.h> +#include <mach/audio.h> +#include <linux/platform_data/video-pxafb.h> +#include <mach/zylonite.h> +#include <linux/platform_data/mmc-pxamci.h> +#include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/platform_data/keypad-pxa27x.h> +#include <linux/platform_data/mtd-nand-pxa3xx.h> #include "devices.h" #include "generic.h" -#define MAX_SLOTS 3 -struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; - int gpio_eth_irq; int gpio_debug_led1; int gpio_debug_led2; @@ -47,6 +45,16 @@ int wm9713_irq; int lcd_id; int lcd_orientation; +struct platform_device pxa_device_wm9713_audio = { + .name = "wm9713-codec", + .id = -1, +}; + +static void __init zylonite_init_wm9713_audio(void) +{ + platform_device_register(&pxa_device_wm9713_audio); +} + static struct resource smc91x_resources[] = { [0] = { .start = ZYLONITE_ETH_PHYS + 0x300, @@ -117,6 +125,7 @@ static struct platform_pwm_backlight_data zylonite_backlight_data = { .max_brightness = 100, .dft_brightness = 100, .pwm_period_ns = 10000, + .enable_gpio = -1, }; static struct platform_device zylonite_backlight_device = { @@ -200,7 +209,7 @@ static void __init zylonite_init_lcd(void) platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { - set_pxa_fb_info(&zylonite_sharp_lcd_info); + pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info); return; } @@ -212,88 +221,35 @@ static void __init zylonite_init_lcd(void) else zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; - set_pxa_fb_info(&zylonite_toshiba_lcd_info); + pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info); } #else static inline void zylonite_init_lcd(void) {} #endif #if defined(CONFIG_MMC) -static int zylonite_mci_ro(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - - return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp); -} - -static int zylonite_mci_init(struct device *dev, - irq_handler_t zylonite_detect_int, - void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int err, cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - /* - * setup GPIO for Zylonite MMC controller - */ - err = gpio_request(gpio_cd, "mmc card detect"); - if (err) - goto err_request_cd; - gpio_direction_input(gpio_cd); - - err = gpio_request(gpio_wp, "mmc write protect"); - if (err) - goto err_request_wp; - gpio_direction_input(gpio_wp); - - err = request_irq(cd_irq, zylonite_detect_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); - if (err) { - printk(KERN_ERR "%s: MMC/SD/SDIO: " - "can't request card detect IRQ\n", __func__); - goto err_request_irq; - } - - return 0; - -err_request_irq: - gpio_free(gpio_wp); -err_request_wp: - gpio_free(gpio_cd); -err_request_cd: - return err; -} - -static void zylonite_mci_exit(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - free_irq(cd_irq, data); - gpio_free(gpio_cd); - gpio_free(gpio_wp); -} - static struct pxamci_platform_data zylonite_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = zylonite_mci_init, - .exit = zylonite_mci_exit, - .get_ro = zylonite_mci_ro, + .gpio_card_detect = EXT_GPIO(0), + .gpio_card_ro = EXT_GPIO(2), + .gpio_power = -1, }; static struct pxamci_platform_data zylonite_mci2_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(1), + .gpio_card_ro = EXT_GPIO(3), + .gpio_power = -1, +}; + +static struct pxamci_platform_data zylonite_mci3_platform_data = { + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(30), + .gpio_card_ro = EXT_GPIO(31), + .gpio_power = -1, }; static void __init zylonite_init_mmc(void) @@ -301,14 +257,14 @@ static void __init zylonite_init_mmc(void) pxa_set_mci_info(&zylonite_mci_platform_data); pxa3xx_set_mci2_info(&zylonite_mci2_platform_data); if (cpu_is_pxa310()) - pxa3xx_set_mci3_info(&zylonite_mci_platform_data); + pxa3xx_set_mci3_info(&zylonite_mci3_platform_data); } #else static inline void zylonite_init_mmc(void) {} #endif #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) -static unsigned int zylonite_matrix_key_map[] = { +static const unsigned int zylonite_matrix_key_map[] = { /* KEY(row, col, key_code) */ KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D), KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H), @@ -351,11 +307,15 @@ static unsigned int zylonite_matrix_key_map[] = { KEY(0, 3, KEY_AUX), /* contact */ }; +static struct matrix_keymap_data zylonite_matrix_keymap_data = { + .keymap = zylonite_matrix_key_map, + .keymap_size = ARRAY_SIZE(zylonite_matrix_key_map), +}; + static struct pxa27x_keypad_platform_data zylonite_keypad_info = { .matrix_key_rows = 8, .matrix_key_cols = 8, - .matrix_key_map = zylonite_matrix_key_map, - .matrix_key_map_size = ARRAY_SIZE(zylonite_matrix_key_map), + .matrix_keymap_data = &zylonite_matrix_keymap_data, .enable_rotary0 = 1, .rotary0_up_key = KEY_UP, @@ -411,8 +371,9 @@ static struct mtd_partition zylonite_nand_partitions[] = { static struct pxa3xx_nand_platform_data zylonite_nand_info = { .enable_arbiter = 1, - .parts = zylonite_nand_partitions, - .nr_parts = ARRAY_SIZE(zylonite_nand_partitions), + .num_cs = 1, + .parts[0] = zylonite_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(zylonite_nand_partitions), }; static void __init zylonite_init_nand(void) @@ -423,8 +384,27 @@ static void __init zylonite_init_nand(void) static inline void zylonite_init_nand(void) {} #endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data zylonite_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +static void __init zylonite_init_ohci(void) +{ + pxa_set_ohci_info(&zylonite_ohci_info); +} +#else +static inline void zylonite_init_ohci(void) {} +#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ + static void __init zylonite_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + /* board-processor specific initialization */ zylonite_pxa300_init(); zylonite_pxa320_init(); @@ -433,8 +413,8 @@ static void __init zylonite_init(void) * Note: We depend that the bootloader set * the correct value to MSC register for SMC91x. */ - smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); - smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); + smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq); + smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq); platform_device_register(&smc91x_device); pxa_set_ac97_info(NULL); @@ -443,14 +423,17 @@ static void __init zylonite_init(void) zylonite_init_keypad(); zylonite_init_nand(); zylonite_init_leds(); + zylonite_init_ohci(); + zylonite_init_wm9713_audio(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") - .phys_io = 0x40000000, - .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .map_io = pxa_map_io, + .atag_offset = 0x100, + .map_io = pxa3xx_map_io, + .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, - .timer = &pxa_timer, + .handle_irq = pxa3xx_handle_irq, + .init_time = pxa_timer_init, .init_machine = zylonite_init, + .restart = pxa_restart, MACHINE_END |