aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/stargate2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/stargate2.c')
-rw-r--r--arch/arm/mach-pxa/stargate2.c59
1 files changed, 34 insertions, 25 deletions
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index cb5611daf5f..01de542432a 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -27,7 +27,7 @@
#include <linux/i2c/pxa-i2c.h>
#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/leds.h>
@@ -44,7 +44,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <mach/smemc.h>
@@ -52,7 +52,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
+#include <linux/platform_data/sht15.h>
#include "devices.h"
#include "generic.h"
@@ -151,10 +151,7 @@ static struct platform_device sht15 = {
};
static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
- {
- .dev = &sht15.dev,
- .supply = "vcc",
- },
+ REGULATOR_SUPPLY("vcc", "sht15"),
};
enum stargate2_ldos{
@@ -376,7 +373,7 @@ static struct spi_board_info spi_board_info[] __initdata = {
.bus_num = 1,
.chip_select = 0,
.controller_data = &staccel_chip_info,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
}, {
.modalias = "cc2420",
.max_speed_hz = 6500000,
@@ -546,7 +543,7 @@ static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
.type = "da9030",
.addr = 0x49,
.platform_data = &imote2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = PXA_GPIO_TO_IRQ(1),
},
};
@@ -560,18 +557,18 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tsl2561",
.addr = 0x49,
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tmp175",
.addr = 0x4A,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
}, { /* IMB400 Multimedia board */
.type = "wm8940",
.addr = 0x1A,
@@ -593,10 +590,16 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
.udc_command = sg2_udc_command,
};
+static struct platform_device imote2_audio_device = {
+ .name = "imote2-audio",
+ .id = -1,
+};
+
static struct platform_device *imote2_devices[] = {
&stargate2_flash_device,
&imote2_leds,
&sht15,
+ &imote2_audio_device,
};
static void __init imote2_init(void)
@@ -661,8 +664,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(40),
- .end = IRQ_GPIO(40),
+ .start = PXA_GPIO_TO_IRQ(40),
+ .end = PXA_GPIO_TO_IRQ(40),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -707,7 +710,7 @@ static int stargate2_mci_init(struct device *dev,
}
gpio_direction_input(SG2_GPIO_nSD_DETECT);
- err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+ err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
stargate2_detect_int,
IRQ_TYPE_EDGE_BOTH,
"MMC card detect",
@@ -731,14 +734,15 @@ static int stargate2_mci_init(struct device *dev,
*
* Very simple control. Either it is on or off and is controlled by
* a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
{
gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+ return 0;
}
static void stargate2_mci_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+ free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
gpio_free(SG2_SD_POWER_ENABLE);
gpio_free(SG2_GPIO_nSD_DETECT);
}
@@ -913,7 +917,7 @@ static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
.type = "da9030",
.addr = 0x49,
.platform_data = &stargate2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = PXA_GPIO_TO_IRQ(1),
},
};
@@ -938,18 +942,18 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tsl2561",
.addr = 0x49,
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tmp175",
.addr = 0x4A,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
},
};
@@ -1000,10 +1004,13 @@ static void __init stargate2_init(void)
#ifdef CONFIG_MACH_INTELMOTE2
MACHINE_START(INTELMOTE2, "IMOTE 2")
.map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
- .timer = &pxa_timer,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
.init_machine = imote2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1012,8 +1019,10 @@ MACHINE_START(STARGATE2, "Stargate 2")
.map_io = pxa27x_map_io,
.nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
- .timer = &pxa_timer,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
.init_machine = stargate2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-15 00:19:58 +0000