diff options
Diffstat (limited to 'arch/arm/mach-pxa/spitz_pm.c')
| -rw-r--r-- | arch/arm/mach-pxa/spitz_pm.c | 48 |
1 files changed, 31 insertions, 17 deletions
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index fc5a70c4035..e191f9996b2 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -14,6 +14,8 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -22,11 +24,11 @@ #include <asm/mach-types.h> #include <mach/hardware.h> -#include <mach/sharpsl.h> #include <mach/spitz.h> -#include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> -#include "sharpsl.h" +#include <mach/pxa27x.h> +#include <mach/sharpsl_pm.h> + +#include "generic.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ @@ -37,10 +39,18 @@ static int spitz_last_ac_status; +static struct gpio spitz_charger_gpios[] = { + { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, + { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, + { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, + { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, + { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, + { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, +}; + static void spitz_charger_init(void) { - pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); + gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios)); } static void spitz_measure_temp(int on) @@ -76,6 +86,8 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } +static unsigned long gpio18_config = GPIO18_GPIO; + static void spitz_presuspend(void) { spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); @@ -97,7 +109,9 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + pxa2xx_mfp_config(&gpio18_config, 1); + gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); + gpio_free(18); PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); @@ -114,8 +128,6 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa_gpio_mode(GPIO18_RDY_MD); - pxa_gpio_mode(10 | GPIO_IN); } static int spitz_should_wakeup(unsigned int resume_on_alarm) @@ -155,20 +167,24 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { - return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); + unsigned long ret; + ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) + << GPIO_bit(SPITZ_GPIO_KEY_INT)) + | gpio_get_value(SPITZ_GPIO_SYNC)); + return ret; } unsigned long spitzpm_read_devdata(int type) { switch (type) { case SHARPSL_STATUS_ACIN: - return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); + return !gpio_get_value(SPITZ_GPIO_AC_IN); case SHARPSL_STATUS_LOCK: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull); case SHARPSL_STATUS_FATAL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal); case SHARPSL_ACIN_VOLT: return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); case SHARPSL_BATT_TEMP: @@ -198,8 +214,6 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .should_wakeup = spitz_should_wakeup, #if defined(CONFIG_LCD_CORGI) .backlight_limit = corgi_lcd_limit_intensity, -#elif defined(CONFIG_BACKLIGHT_CORGI) - .backlight_limit = corgibl_limit_intensity, #endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, @@ -218,7 +232,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { static struct platform_device *spitzpm_device; -static int __devinit spitzpm_init(void) +static int spitzpm_init(void) { int ret; |