diff options
Diffstat (limited to 'arch/arm/mach-pxa/raumfeld.c')
| -rw-r--r-- | arch/arm/mach-pxa/raumfeld.c | 101 |
1 files changed, 59 insertions, 42 deletions
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 4121d03ea2c..8386dc30b3e 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -18,7 +18,6 @@ #include <linux/init.h> #include <linux/kernel.h> -#include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/gpio.h> @@ -32,6 +31,7 @@ #include <linux/sched.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/lis3lv02d.h> @@ -43,18 +43,16 @@ #include <linux/regulator/consumer.h> #include <linux/delay.h> +#include <asm/system_info.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa3xx.h> -#include <mach/mfp-pxa300.h> -#include <mach/ohci.h> -#include <mach/pxafb.h> -#include <mach/mmc.h> -#include <plat/i2c.h> -#include <plat/pxa3xx_nand.h> +#include <mach/pxa300.h> +#include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/platform_data/video-pxafb.h> +#include <linux/platform_data/mmc-pxamci.h> +#include <linux/platform_data/mtd-nand-pxa3xx.h> #include "generic.h" #include "devices.h" @@ -296,8 +294,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = gpio_to_irq(GPIO_ETH_IRQ), - .end = gpio_to_irq(GPIO_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -350,8 +348,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = { static struct pxa3xx_nand_platform_data raumfeld_nand_info = { .enable_arbiter = 1, .keep_config = 1, - .parts = raumfeld_nand_partitions, - .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions), + .num_cs = 1, + .parts[0] = raumfeld_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(raumfeld_nand_partitions), }; /** @@ -506,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .pin = GPIO_ONE_WIRE, .is_open_drain = 0, .enable_external_pullup = w1_enable_external_pullup, + .ext_pullup_enable_pin = -EINVAL, }; struct platform_device raumfeld_w1_gpio_device = { @@ -539,6 +539,7 @@ static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { .dft_brightness = 100, /* 10000 ns = 10 ms ^= 100 kHz */ .pwm_period_ns = 10000, + .enable_gpio = -1, }; static struct platform_device raumfeld_pwm_backlight_device = { @@ -574,10 +575,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = { .xres = 480, .yres = 272, .bpp = 16, - .hsync_len = 4, + .hsync_len = 41, .left_margin = 2, .right_margin = 1, - .vsync_len = 1, + .vsync_len = 10, .upper_margin = 3, .lower_margin = 1, .sync = 0, @@ -588,34 +589,41 @@ static struct pxafb_mach_info raumfeld_sharp_lcd_info = { .num_modes = 1, .video_mem_size = 0x400000, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +#ifdef CONFIG_PXA3XX_GCU + .acceleration_enabled = 1, +#endif }; static void __init raumfeld_lcd_init(void) { int ret; - set_pxa_fb_info(&raumfeld_sharp_lcd_info); - - /* Earlier devices had the backlight regulator controlled - * via PWM, later versions use another controller for that */ - if ((system_rev & 0xff) < 2) { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - platform_device_register(&raumfeld_pwm_backlight_device); - } else - platform_device_register(&raumfeld_lt3593_device); - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) pr_warning("Unable to request GPIO_TFT_VA_EN\n"); else gpio_direction_output(GPIO_TFT_VA_EN, 1); + msleep(100); + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); if (ret < 0) pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); else gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); + + /* Hardware revision 2 has the backlight regulator controlled + * by an LT3593, earlier and later devices use PWM for that. */ + if ((system_rev & 0xff) == 2) { + platform_device_register(&raumfeld_lt3593_device); + } else { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } + + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); + platform_device_register(&pxa3xx_device_gcu); } /** @@ -653,10 +661,10 @@ static struct lis3lv02d_platform_data lis3_pdata = { #define SPI_AK4104 \ { \ - .modalias = "ak4104", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ + .modalias = "ak4104-codec", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ .controller_data = (void *) GPIO_SPDIF_CS, \ } @@ -668,7 +676,7 @@ static struct lis3lv02d_platform_data lis3_pdata = { .chip_select = 1, \ .controller_data = (void *) GPIO_ACCEL_CS, \ .platform_data = &lis3_pdata, \ - .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \ + .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \ } #define SPI_DAC7512 \ @@ -947,12 +955,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = gpio_to_irq(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; @@ -1083,30 +1091,39 @@ static void __init raumfeld_speaker_init(void) #ifdef CONFIG_MACH_RAUMFELD_RC MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_controller_init, - .map_io = pxa_map_io, + .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, - .timer = &pxa_timer, + .handle_irq = pxa3xx_handle_irq, + .init_time = pxa_timer_init, + .restart = pxa_restart, MACHINE_END #endif #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_connector_init, - .map_io = pxa_map_io, + .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, - .timer = &pxa_timer, + .handle_irq = pxa3xx_handle_irq, + .init_time = pxa_timer_init, + .restart = pxa_restart, MACHINE_END #endif #ifdef CONFIG_MACH_RAUMFELD_SPEAKER MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_speaker_init, - .map_io = pxa_map_io, + .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, - .timer = &pxa_timer, + .handle_irq = pxa3xx_handle_irq, + .init_time = pxa_timer_init, + .restart = pxa_restart, MACHINE_END #endif |