diff options
Diffstat (limited to 'arch/arm/mach-pxa/include/mach/gumstix.h')
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/gumstix.h | 34 |
1 files changed, 13 insertions, 21 deletions
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 099f54a41de..f7df27bbb42 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 @@ -14,27 +15,17 @@ /* GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean -interrupt signal for determining cable presence. On the original gumstix, -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +interrupt signal for determining cable presence. On the gumstix F, this moves to GPIO17 and GPIO37. */ /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn has detected a cable insertion; driven low otherwise. */ -#ifdef CONFIG_ARCH_GUMSTIX_ORIG - -#define GPIO_GUMSTIX_USB_GPIOn 81 -#define GPIO_GUMSTIX_USB_GPIOx 83 - -#else - #define GPIO_GUMSTIX_USB_GPIOn 35 #define GPIO_GUMSTIX_USB_GPIOx 41 -#endif - /* usb state change */ -#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) +#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn) #define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) #define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) @@ -45,7 +36,7 @@ has detected a cable insertion; driven low otherwise. */ */ #define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ #define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ -#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) +#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT) /* * SMC Ethernet definitions @@ -59,10 +50,10 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO_GUMSTIX_ETH0 36 #define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) -#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) #define GPIO_GUMSTIX_ETH1 27 #define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) -#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) +#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) /* CF reset line */ @@ -73,18 +64,18 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO4_nSTSCHG GPIO4_nBVD1 #define GPIO11_nCD 11 #define GPIO26_PRDY_nBSY 26 -#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) -#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) -#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) +#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY) /* CF slot 1 */ #define GPIO18_nBVD1 18 #define GPIO18_nSTSCHG GPIO18_nBVD1 #define GPIO36_nCD 36 #define GPIO27_PRDY_nBSY 27 -#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) -#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) -#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) +#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY) /* CF GPIO line modes */ #define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) @@ -97,4 +88,5 @@ has detected a cable insertion; driven low otherwise. */ /* for expansion boards that can't be programatically detected */ extern int am200_init(void); +extern int am300_init(void); |