1 files changed, 1 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h
new file mode 100644
index 00000000000..665542e0c9e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 0153950f606..584e8d4e289 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
 	select ARCH_DAVINCI_DA8XX
-	select ARCH_HAS_CPUFREQ
 	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
@@ -51,17 +50,13 @@ config ARCH_DAVINCI_DM365
 	select AINTC
 	select ARCH_DAVINCI_DMx
 
-config ARCH_DAVINCI_TNETV107X
-	bool "TNETV107X based system"
-	select CPU_V6
-	select CP_INTC
-
 comment "DaVinci Board Type"
 
 config MACH_DA8XX_DT
 	bool "Support DA8XX platforms using device tree"
 	default y
 	depends on ARCH_DAVINCI_DA8XX
+	select PINCTRL
 	help
 	  Say y here to include support for TI DaVinci DA850 based using
 	  Flattened Device Tree. More information at Documentation/devicetree
@@ -213,18 +208,6 @@ config DA850_WL12XX
 	  Say Y if you want to use a wl1271 expansion card connected to the
 	  AM18x EVM.
 
-config GPIO_PCA953X
-	default MACH_DAVINCI_DA850_EVM
-
-config KEYBOARD_GPIO_POLLED
-	default MACH_DAVINCI_DA850_EVM
-
-config MACH_TNETV107X
-	bool "TI TNETV107X Reference Platform"
-	default ARCH_DAVINCI_TNETV107X
-	depends on ARCH_DAVINCI_TNETV107X
-	help
-	  Say Y here to select the TI TNETV107X Evaluation Module.
 
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index fb5c1aa98a6..2204239ed24 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o psc.o \
-			   dma.o usb.o common.o sram.o aemif.o
+			   usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -32,12 +31,10 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o cdce949.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
 obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index 04a6c4e67b1..4b81601754a 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -1,13 +1,7 @@
-ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
-ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
-$(error Cannot enable DaVinci and DA8XX platforms concurrently)
-else
-   zreladdr-y	+= 0xc0008000
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc0800000
-endif
-else
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x80800000
-endif
+zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= 0xc0008000
+params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0000100
+initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0800000
+
+zreladdr-$(CONFIG_ARCH_DAVINCI_DMx)		+= 0x80008000
+params_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80800000
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index f091a9010c2..ff8b7e76b6e 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -16,6 +16,7 @@
 #include <linux/time.h>
 
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
 
 /* Timing value configuration */
 
@@ -43,6 +44,17 @@
 				WSTROBE(WSTROBE_MAX) | \
 				WSETUP(WSETUP_MAX))
 
+static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static inline void davinci_aemif_writel(void __iomem *base,
+					int offset, unsigned long value)
+{
+	writel_relaxed(value, base + offset);
+}
+
 /*
  * aemif_calc_rate - calculate timing data.
  * @wanted: The cycle time needed in nanoseconds.
@@ -76,6 +88,7 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max)
  * @t: timing values to be progammed
  * @base: The virtual base address of the AEMIF interface
  * @cs: chip-select to program the timing values for
+ * @clkrate: the AEMIF clkrate
  *
  * This function programs the given timing values (in real clock) into the
  * AEMIF registers taking the AEMIF clock into account.
@@ -86,24 +99,17 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max)
  *
  * Returns 0 on success, else negative errno.
  */
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs)
+static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+					void __iomem *base, unsigned cs,
+					unsigned long clkrate)
 {
 	unsigned set, val;
 	int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
 	unsigned offset = A1CR_OFFSET + cs * 4;
-	struct clk *aemif_clk;
-	unsigned long clkrate;
 
 	if (!t)
 		return 0;	/* Nothing to do */
 
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return PTR_ERR(aemif_clk);
-
-	clkrate = clk_get_rate(aemif_clk);
-
 	clkrate /= 1000;	/* turn clock into kHz for ease of use */
 
 	ta	= aemif_calc_rate(t->ta, clkrate, TA_MAX);
@@ -130,4 +136,83 @@ int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
 
 	return 0;
 }
-EXPORT_SYMBOL(davinci_aemif_setup_timing);
+
+/**
+ * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata
+ * @pdev - link to platform device to setup settings for
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int davinci_aemif_setup(struct platform_device *pdev)
+{
+	struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev);
+	uint32_t val;
+	unsigned long clkrate;
+	struct resource	*res;
+	void __iomem *base;
+	struct clk *clk;
+	int ret = 0;
+
+	clk = clk_get(&pdev->dev, "aemif");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+			ret);
+		goto err_put;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	base = ioremap(res->start, resource_size(res));
+	if (!base) {
+		dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/*
+	 * Setup Async configuration register in case we did not boot
+	 * from NAND and so bootloader did not bother to set it up.
+	 */
+	val = davinci_aemif_readl(base, A1CR_OFFSET + pdev->id * 4);
+	/*
+	 * Extended Wait is not valid and Select Strobe mode is not
+	 * used
+	 */
+	val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
+	if (pdata->options & NAND_BUSWIDTH_16)
+		val |= 0x1;
+
+	davinci_aemif_writel(base, A1CR_OFFSET + pdev->id * 4, val);
+
+	clkrate = clk_get_rate(clk);
+
+	if (pdata->timing)
+		ret = davinci_aemif_setup_timing(pdata->timing, base, pdev->id,
+						 clkrate);
+
+	if (ret < 0)
+		dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
+
+	iounmap(base);
+err:
+	clk_disable_unprepare(clk);
+err_put:
+	clk_put(clk);
+	return ret;
+}
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 95b5e102ceb..5623131c4f0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -17,22 +17,24 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*
@@ -74,7 +76,7 @@ static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
 	if (handler != NULL) {
 		da830_evm_usb_ocic_handler = handler;
 
-		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+		error = request_irq(irq, da830_evm_usb_ocic_irq,
 				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				    "OHCI over-current indicator", NULL);
 		if (error)
@@ -185,10 +187,6 @@ static __init void da830_evm_usb_init(void)
 			   __func__, ret);
 }
 
-static struct davinci_uart_config da830_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static const short da830_evm_mcasp1_pins[] = {
 	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
 	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
@@ -246,7 +244,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = {
 	.wires			= 8,
 	.max_freq		= 50000000,
 	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version		= MMC_CTLR_VERSION_2,
 };
 
 static inline void da830_evm_init_mmc(void)
@@ -298,11 +295,7 @@ static const short da830_evm_emif25_pins[] = {
 	-1
 };
 
-#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC	1
-#else
-#define HAS_MMC	0
-#endif
+#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
 
 #ifdef CONFIG_DA830_UI_NAND
 static struct mtd_partition da830_evm_nand_partitions[] = {
@@ -426,6 +419,9 @@ static inline void da830_evm_init_nand(int mux_mode)
 	if (ret)
 		pr_warning("da830_evm_init: NAND device not registered.\n");
 
+	if (davinci_aemif_setup(&da830_evm_nand_device))
+		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
 	gpio_direction_output(mux_mode, 1);
 }
 #else
@@ -600,6 +596,10 @@ static __init void da830_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da830_register_gpio();
+	if (ret)
+		pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
+
 	ret = da830_register_edma(da830_edma_rsv);
 	if (ret)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
@@ -635,7 +635,7 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
-	davinci_serial_init(&da830_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
@@ -652,8 +652,13 @@ static __init void da830_evm_init(void)
 	if (ret)
 		pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
 
-	ret = da8xx_register_spi(0, da830evm_spi_info,
-				 ARRAY_SIZE(da830evm_spi_info));
+	ret = spi_register_board_info(da830evm_spi_info,
+				      ARRAY_SIZE(da830evm_spi_info));
+	if (ret)
+		pr_warn("%s: spi info registration failed: %d\n", __func__,
+			ret);
+
+	ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
 	if (ret)
 		pr_warning("da830_evm_init: spi 0 registration failed: %d\n",
 			   ret);
@@ -679,7 +684,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.atag_offset	= 0x100,
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da830_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0299915575a..234c5bb091f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -18,8 +18,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/at24.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/input.h>
 #include <linux/input/tps6507x-ts.h>
 #include <linux/mfd/tps6507x.h>
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
@@ -38,6 +39,7 @@
 #include <linux/spi/flash.h>
 #include <linux/wl12xx.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -335,12 +337,7 @@ static const short da850_evm_nor_pins[] = {
 	-1
 };
 
-#if defined(CONFIG_MMC_DAVINCI) || \
-    defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC 1
-#else
-#define HAS_MMC 0
-#endif
+#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
 
 static inline void da850_evm_setup_nor_nand(void)
 {
@@ -349,18 +346,21 @@ static inline void da850_evm_setup_nor_nand(void)
 	if (!HAS_MMC) {
 		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
 		if (ret)
-			pr_warning("da850_evm_init: nand mux setup failed: "
-					"%d\n", ret);
+			pr_warn("%s: NAND mux setup failed: %d\n",
+				__func__, ret);
 
 		ret = davinci_cfg_reg_list(da850_evm_nor_pins);
 		if (ret)
-			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
-				ret);
+			pr_warn("%s: NOR mux setup failed: %d\n",
+				__func__, ret);
 
 		da850_evm_init_nor();
 
 		platform_add_devices(da850_evm_devices,
 					ARRAY_SIZE(da850_evm_devices));
+
+		if (davinci_aemif_setup(&da850_evm_nandflash_device))
+			pr_warn("%s: Cannot configure AEMIF.\n", __func__);
 	}
 }
 
@@ -401,7 +401,7 @@ enum da850_evm_ui_exp_pins {
 	DA850_EVM_UI_EXP_PB1,
 };
 
-static const char const *da850_evm_ui_exp[] = {
+static const char * const da850_evm_ui_exp[] = {
 	[DA850_EVM_UI_EXP_SEL_C]        = "sel_c",
 	[DA850_EVM_UI_EXP_SEL_B]        = "sel_b",
 	[DA850_EVM_UI_EXP_SEL_A]        = "sel_a",
@@ -477,19 +477,19 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 
 	ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
 	if (ret) {
-		pr_warning("Cannot open UI expander pin %d\n", sel_a);
+		pr_warn("Cannot open UI expander pin %d\n", sel_a);
 		goto exp_setup_sela_fail;
 	}
 
 	ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
 	if (ret) {
-		pr_warning("Cannot open UI expander pin %d\n", sel_b);
+		pr_warn("Cannot open UI expander pin %d\n", sel_b);
 		goto exp_setup_selb_fail;
 	}
 
 	ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
 	if (ret) {
-		pr_warning("Cannot open UI expander pin %d\n", sel_c);
+		pr_warn("Cannot open UI expander pin %d\n", sel_c);
 		goto exp_setup_selc_fail;
 	}
 
@@ -501,7 +501,7 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 	da850_evm_ui_keys_init(gpio);
 	ret = platform_device_register(&da850_evm_ui_keys_device);
 	if (ret) {
-		pr_warning("Could not register UI GPIO expander push-buttons");
+		pr_warn("Could not register UI GPIO expander push-buttons");
 		goto exp_setup_keys_fail;
 	}
 
@@ -565,7 +565,7 @@ enum da850_evm_bb_exp_pins {
 	DA850_EVM_BB_EXP_USER_SW8
 };
 
-static const char const *da850_evm_bb_exp[] = {
+static const char * const da850_evm_bb_exp[] = {
 	[DA850_EVM_BB_EXP_DEEP_SLEEP_EN]	= "deep_sleep_en",
 	[DA850_EVM_BB_EXP_SW_RST]		= "sw_rst",
 	[DA850_EVM_BB_EXP_TP_23]		= "tp_23",
@@ -690,14 +690,14 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client,
 	da850_evm_bb_keys_init(gpio);
 	ret = platform_device_register(&da850_evm_bb_keys_device);
 	if (ret) {
-		pr_warning("Could not register baseboard GPIO expander keys");
+		pr_warn("Could not register baseboard GPIO expander keys");
 		goto io_exp_setup_sw_fail;
 	}
 
 	da850_evm_bb_leds_init(gpio);
 	ret = platform_device_register(&da850_evm_bb_leds_device);
 	if (ret) {
-		pr_warning("Could not register baseboard GPIO expander LEDS");
+		pr_warn("Could not register baseboard GPIO expander LEDs");
 		goto io_exp_setup_leds_fail;
 	}
 
@@ -751,10 +751,6 @@ static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_delay	= 0,	/* usec */
 };
 
-static struct davinci_uart_config da850_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -802,7 +798,6 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static const short da850_evm_mmcsd0_pins[] __initconst = {
@@ -991,7 +986,6 @@ static struct regulator_init_data tps65070_regulator_data[] = {
 static struct touchscreen_init_data tps6507x_touchscreen_data = {
 	.poll_period =  30,	/* ms between touch samples */
 	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vref = 0,		/* turn off vref when not using A/D */
 	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
 	.product = 65070,	/* /sys/class/input/input?/id/product */
 	.version = 0x100,	/* /sys/class/input/input?/id/version */
@@ -1065,21 +1059,19 @@ static int __init da850_evm_config_emac(void)
 	}
 
 	if (ret)
-		pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
-				ret);
+		pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
+			__func__, ret);
 
 	/* configure the CFGCHIP3 register for RMII or MII */
 	__raw_writel(val, cfg_chip3_base);
 
 	ret = davinci_cfg_reg(DA850_GPIO2_6);
 	if (ret)
-		pr_warning("da850_evm_init:GPIO(2,6) mux setup "
-							"failed\n");
+		pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
 
 	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
 	if (ret) {
-		pr_warning("Cannot open GPIO %d\n",
-					DA850_MII_MDIO_CLKEN_PIN);
+		pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
 		return ret;
 	}
 
@@ -1090,8 +1082,7 @@ static int __init da850_evm_config_emac(void)
 
 	ret = da8xx_register_emac();
 	if (ret)
-		pr_warning("da850_evm_init: emac registration failed: %d\n",
-				ret);
+		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
 
 	return 0;
 }
@@ -1256,11 +1247,22 @@ static struct vpif_capture_config da850_vpif_capture_config = {
 };
 
 /* VPIF display configuration */
+
+static struct adv7343_platform_data adv7343_pdata = {
+	.mode_config = {
+		.dac = { 1, 1, 1 },
+	},
+	.sd_config = {
+		.sd_dac_out = { 1 },
+	},
+};
+
 static struct vpif_subdev_info da850_vpif_subdev[] = {
 	{
 		.name = "adv7343",
 		.board_info = {
 			I2C_BOARD_INFO("adv7343", 0x2a),
+			.platform_data = &adv7343_pdata,
 		},
 	},
 };
@@ -1362,7 +1364,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = {
 	.max_freq	= 25000000,
 	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
 			  MMC_CAP_POWER_OFF_CARD,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static const short da850_wl12xx_pins[] __initconst = {
@@ -1441,62 +1442,62 @@ static __init void da850_evm_init(void)
 {
 	int ret;
 
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	ret = pmic_tps65070_init();
 	if (ret)
-		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
-				ret);
+		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
 
 	ret = da850_register_edma(da850_edma_rsv);
 	if (ret)
-		pr_warning("da850_evm_init: edma registration failed: %d\n",
-				ret);
+		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
 
 	ret = davinci_cfg_reg_list(da850_i2c0_pins);
 	if (ret)
-		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
-				ret);
+		pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
 
 	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
 	if (ret)
-		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
-				ret);
+		pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
 
 
 	ret = da8xx_register_watchdog();
 	if (ret)
-		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
-				ret);
+		pr_warn("%s: watchdog registration failed: %d\n",
+			__func__, ret);
 
 	if (HAS_MMC) {
 		ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
 		if (ret)
-			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
-					" %d\n", ret);
+			pr_warn("%s: MMCSD0 mux setup failed: %d\n",
+				__func__, ret);
 
 		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
 		if (ret)
-			pr_warning("da850_evm_init: can not open GPIO %d\n",
-					DA850_MMCSD_CD_PIN);
+			pr_warn("%s: can not open GPIO %d\n",
+				__func__, DA850_MMCSD_CD_PIN);
 		gpio_direction_input(DA850_MMCSD_CD_PIN);
 
 		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
 		if (ret)
-			pr_warning("da850_evm_init: can not open GPIO %d\n",
-					DA850_MMCSD_WP_PIN);
+			pr_warn("%s: can not open GPIO %d\n",
+				__func__, DA850_MMCSD_WP_PIN);
 		gpio_direction_input(DA850_MMCSD_WP_PIN);
 
 		ret = da8xx_register_mmcsd0(&da850_mmc_config);
 		if (ret)
-			pr_warning("da850_evm_init: mmcsd0 registration failed:"
-					" %d\n", ret);
+			pr_warn("%s: MMCSD0 registration failed: %d\n",
+				__func__, ret);
 
 		ret = da850_wl12xx_init();
 		if (ret)
-			pr_warning("da850_evm_init: wl12xx initialization"
-				   " failed: %d\n", ret);
+			pr_warn("%s: WL12xx initialization failed: %d\n",
+				__func__, ret);
 	}
 
-	davinci_serial_init(&da850_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	i2c_register_board_info(1, da850_evm_i2c_devices,
 			ARRAY_SIZE(da850_evm_i2c_devices));
@@ -1511,16 +1512,14 @@ static __init void da850_evm_init(void)
 
 	ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
 	if (ret)
-		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
-				ret);
+		pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
 
 	da850_evm_snd_data.sram_pool = sram_get_gen_pool();
 	da8xx_register_mcasp(0, &da850_evm_snd_data);
 
 	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
 	if (ret)
-		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
-				ret);
+		pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
 
 	ret = da8xx_register_uio_pruss();
 	if (ret)
@@ -1530,53 +1529,56 @@ static __init void da850_evm_init(void)
 	/* Handle board specific muxing for LCD here */
 	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
 	if (ret)
-		pr_warning("da850_evm_init: evm specific lcd mux setup "
-				"failed: %d\n",	ret);
+		pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
+			__func__, ret);
 
 	ret = da850_lcd_hw_init();
 	if (ret)
-		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
-				ret);
+		pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
 
 	sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
 	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
 	if (ret)
-		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
-				ret);
+		pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
 
 	ret = da8xx_register_rtc();
 	if (ret)
-		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+		pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
 
 	ret = da850_evm_init_cpufreq();
 	if (ret)
-		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
-				ret);
+		pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
 
 	ret = da8xx_register_cpuidle();
 	if (ret)
-		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
-				ret);
+		pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
 
 	ret = da850_register_pm(&da850_pm_device);
 	if (ret)
-		pr_warning("da850_evm_init: suspend registration failed: %d\n",
-				ret);
+		pr_warn("%s: suspend registration failed: %d\n", __func__, ret);
 
 	da850_vpif_init();
 
-	ret = da8xx_register_spi(1, da850evm_spi_info,
-				 ARRAY_SIZE(da850evm_spi_info));
+	ret = spi_register_board_info(da850evm_spi_info,
+				      ARRAY_SIZE(da850evm_spi_info));
 	if (ret)
-		pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
-				ret);
+		pr_warn("%s: spi info registration failed: %d\n", __func__,
+			ret);
+
+	ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
+	if (ret)
+		pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
 
 	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
 	if (ret)
-		pr_warning("da850_evm_init: sata registration failed: %d\n",
-				ret);
+		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
 	da850_evm_setup_mac_addr();
+
+	ret = da8xx_register_rproc();
+	if (ret)
+		pr_warn("%s: dsp/rproc registration failed: %d\n",
+			__func__, ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -1599,9 +1601,10 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.atag_offset	= 0x100,
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da850_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
+	.reserve	= da8xx_rproc_reserve_cma,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index cdf8d0746e7..06d63d5651f 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -22,15 +22,17 @@
 #include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
+#include <mach/common.h>
 
 #include "davinci.h"
 
@@ -242,19 +244,80 @@ static struct vpfe_config vpfe_cfg = {
 	.ccdc = "DM355 CCDC",
 };
 
+/* venc standards timings */
+static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
+	{
+		.name		= "ntsc",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_NTSC,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {11, 10},
+		.fps		= {30000, 1001},
+		.left_margin	= 0x79,
+		.upper_margin	= 0x10,
+	},
+	{
+		.name		= "pal",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_PAL,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {54, 59},
+		.fps		= {25, 1},
+		.left_margin	= 0x7E,
+		.upper_margin	= 0x16
+	},
+};
+
+#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/*
+ * The outputs available from VPBE + ecnoders. Keep the
+ * the order same as that of encoders. First those from venc followed by that
+ * from encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more than
+ * one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm355evm_vpbe_outputs[] = {
+	{
+		.output		= {
+			.index		= 0,
+			.name		= "Composite",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.std		= VENC_STD_ALL,
+			.capabilities	= V4L2_OUT_CAP_STD,
+		},
+		.subdev_name	= DM355_VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "ntsc",
+		.num_modes	= ARRAY_SIZE(dm355evm_enc_preset_timing),
+		.modes		= dm355evm_enc_preset_timing,
+		.if_params	= V4L2_MBUS_FMT_FIXED,
+	},
+};
+
+static struct vpbe_config dm355evm_display_cfg = {
+	.module_name	= "dm355-vpbe-display",
+	.i2c_adapter_id	= 1,
+	.osd		= {
+		.module_name	= DM355_VPBE_OSD_SUBDEV_NAME,
+	},
+	.venc		= {
+		.module_name	= DM355_VPBE_VENC_SUBDEV_NAME,
+	},
+	.num_outputs	= ARRAY_SIZE(dm355evm_vpbe_outputs),
+	.outputs	= dm355evm_vpbe_outputs,
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&dm355evm_dm9000,
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_evm_map_io(void)
 {
-	/* setup input configuration for VPFE input devices */
-	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
@@ -280,7 +343,6 @@ static struct davinci_mmc_config dm355evm_mmc_config = {
 	.wires		= 4,
 	.max_freq       = 50000000,
 	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_1,
 };
 
 /* Don't connect anything to J10 unless you're only using USB host
@@ -288,11 +350,7 @@ static struct davinci_mmc_config dm355evm_mmc_config = {
  * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
  * the ID pin won't need any help.
  */
-#ifdef CONFIG_USB_MUSB_PERIPHERAL
-#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
-#else
 #define USB_ID_VALUE	1	/* ID pulled low */
-#endif
 
 static struct spi_eeprom at25640a = {
 	.byte_len	= SZ_64K / 8,
@@ -315,6 +373,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = {
 static __init void dm355_evm_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(1, "dm9000");
 	gpio_direction_input(1);
@@ -329,7 +392,7 @@ static __init void dm355_evm_init(void)
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
@@ -344,6 +407,8 @@ static __init void dm355_evm_init(void)
 	davinci_setup_mmc(0, &dm355evm_mmc_config);
 	davinci_setup_mmc(1, &dm355evm_mmc_config);
 
+	dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
+
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
 
@@ -355,7 +420,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = dm355_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index d41954507fc..680a7a2d910 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -19,15 +19,16 @@
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
+#include <mach/common.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -75,6 +76,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.ecc_bits		= 4,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 };
 
@@ -172,10 +174,6 @@ static struct platform_device *davinci_leopard_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_leopard_map_io(void)
 {
 	dm355_init();
@@ -210,11 +208,7 @@ static struct davinci_mmc_config dm355leopard_mmc_config = {
  * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
  * the ID pin won't need any help.
  */
-#ifdef CONFIG_USB_MUSB_PERIPHERAL
-#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
-#else
 #define USB_ID_VALUE	1	/* ID pulled low */
-#endif
 
 static struct spi_eeprom at25640a = {
 	.byte_len	= SZ_64K / 8,
@@ -237,6 +231,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
 static __init void dm355_leopard_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(9, "dm9000");
 	gpio_direction_input(9);
@@ -251,7 +250,7 @@ static __init void dm355_leopard_init(void)
 	platform_add_devices(davinci_leopard_devices,
 			     ARRAY_SIZE(davinci_leopard_devices));
 	leopard_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
@@ -274,7 +273,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = dm355_leopard_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 5d49c75388c..e08a8684ead 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -18,7 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -27,6 +27,7 @@
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/v4l2-dv-timings.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,6 +40,7 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/keyscan-davinci.h>
 
+#include <media/ths7303.h>
 #include <media/tvp514x.h>
 
 #include "davinci.h"
@@ -174,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data = {
+static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
 	.asp_chan_q = EVENTQ_3,
 };
 
@@ -253,7 +255,6 @@ static struct davinci_mmc_config dm365evm_mmc_config = {
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static void dm365evm_emac_configure(void)
@@ -374,6 +375,165 @@ static struct vpfe_config vpfe_cfg = {
 	.ccdc = "ISIF",
 };
 
+/* venc standards timings */
+static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
+	{
+		.name		= "ntsc",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_NTSC,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {11, 10},
+		.fps		= {30000, 1001},
+		.left_margin	= 0x79,
+		.upper_margin	= 0x10,
+	},
+	{
+		.name		= "pal",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_PAL,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {54, 59},
+		.fps		= {25, 1},
+		.left_margin	= 0x7E,
+		.upper_margin	= 0x16,
+	},
+};
+
+/* venc dv timings */
+static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
+	{
+		.name		= "480p59_94",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {1, 1},
+		.fps		= {5994, 100},
+		.left_margin	= 0x8F,
+		.upper_margin	= 0x2D,
+	},
+	{
+		.name		= "576p50",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {1, 1},
+		.fps		= {50, 1},
+		.left_margin	= 0x8C,
+		.upper_margin   = 0x36,
+	},
+	{
+		.name		= "720p60",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_1280X720P60,
+		.interlaced	= 0,
+		.xres		= 1280,
+		.yres		= 720,
+		.aspect		= {1, 1},
+		.fps		= {60, 1},
+		.left_margin	= 0x117,
+		.right_margin	= 70,
+		.upper_margin	= 38,
+		.lower_margin	= 3,
+		.hsync_len	= 80,
+		.vsync_len	= 5,
+	},
+	{
+		.name		= "1080i60",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_1920X1080I60,
+		.interlaced	= 1,
+		.xres		= 1920,
+		.yres		= 1080,
+		.aspect		= {1, 1},
+		.fps		= {30, 1},
+		.left_margin	= 0xc9,
+		.right_margin	= 80,
+		.upper_margin	= 30,
+		.lower_margin	= 3,
+		.hsync_len	= 88,
+		.vsync_len	= 5,
+	},
+};
+
+#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/*
+ * The outputs available from VPBE + ecnoders. Keep the
+ * the order same as that of encoders. First those from venc followed by that
+ * from encoders. Index in the output refers to index on a particular
+ * encoder.Driver uses this index to pass it to encoder when it supports more
+ * than one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm365evm_vpbe_outputs[] = {
+	{
+		.output		= {
+			.index		= 0,
+			.name		= "Composite",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.std		= VENC_STD_ALL,
+			.capabilities	= V4L2_OUT_CAP_STD,
+		},
+		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "ntsc",
+		.num_modes	= ARRAY_SIZE(dm365evm_enc_std_timing),
+		.modes		= dm365evm_enc_std_timing,
+		.if_params	= V4L2_MBUS_FMT_FIXED,
+	},
+	{
+		.output		= {
+			.index		= 1,
+			.name		= "Component",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
+		},
+		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "480p59_94",
+		.num_modes	= ARRAY_SIZE(dm365evm_enc_preset_timing),
+		.modes		= dm365evm_enc_preset_timing,
+		.if_params	= V4L2_MBUS_FMT_FIXED,
+	},
+};
+
+/*
+ * Amplifiers on the board
+ */
+static struct ths7303_platform_data ths7303_pdata = {
+	.ch_1 = 3,
+	.ch_2 = 3,
+	.ch_3 = 3,
+};
+
+static struct amp_config_info vpbe_amp = {
+	.module_name	= "ths7303",
+	.is_i2c		= 1,
+	.board_info	= {
+		I2C_BOARD_INFO("ths7303", 0x2c),
+		.platform_data = &ths7303_pdata,
+	}
+};
+
+static struct vpbe_config dm365evm_display_cfg = {
+	.module_name	= "dm365-vpbe-display",
+	.i2c_adapter_id	= 1,
+	.amp		= &vpbe_amp,
+	.osd		= {
+		.module_name	= DM365_VPBE_OSD_SUBDEV_NAME,
+	},
+	.venc		= {
+		.module_name	= DM365_VPBE_VENC_SUBDEV_NAME,
+	},
+	.num_outputs	= ARRAY_SIZE(dm365evm_vpbe_outputs),
+	.outputs	= dm365evm_vpbe_outputs,
+};
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
@@ -558,14 +718,8 @@ fail:
 	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm365_evm_map_io(void)
 {
-	/* setup input configuration for VPFE input devices */
-	dm365_set_vpfe_config(&vpfe_cfg);
 	dm365_init();
 }
 
@@ -589,14 +743,22 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = {
 
 static __init void dm365_evm_init(void)
 {
+	int ret;
+
+	ret = dm365_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm365_serial_device);
 
 	dm365evm_emac_configure();
 	dm365evm_mmc_configure();
 
 	davinci_setup_mmc(0, &dm365evm_mmc_config);
 
+	dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
+
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
 
@@ -616,7 +778,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.atag_offset	= 0x100,
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= dm365_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index f5e018de7fa..e583e58b5e1 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -15,7 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -153,6 +153,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &davinci_evm_nandflash_timing,
 };
@@ -570,7 +571,6 @@ static struct davinci_mmc_config dm6446evm_mmc_config = {
 	.get_cd		= dm6444evm_mmc_get_cd,
 	.get_ro		= dm6444evm_mmc_get_ro,
 	.wires		= 4,
-	.version	= MMC_CTLR_VERSION_1
 };
 
 static struct i2c_board_info __initdata i2c_info[] =  {
@@ -622,7 +622,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
 	{
 		.name		= "ntsc",
 		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_525_60,
+		.std_id		= V4L2_STD_NTSC,
 		.interlaced	= 1,
 		.xres		= 720,
 		.yres		= 480,
@@ -634,7 +634,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
 	{
 		.name		= "pal",
 		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_625_50,
+		.std_id		= V4L2_STD_PAL,
 		.interlaced	= 1,
 		.xres		= 720,
 		.yres		= 576,
@@ -649,7 +649,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
 static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
 	{
 		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_CUSTOM_TIMINGS,
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
 		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
 		.interlaced	= 0,
 		.xres		= 720,
@@ -661,7 +661,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
 	},
 	{
 		.name		= "576p50",
-		.timings_type	= VPBE_ENC_CUSTOM_TIMINGS,
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
 		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
 		.interlaced	= 0,
 		.xres		= 720,
@@ -690,7 +690,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = {
 			.std		= VENC_STD_ALL,
 			.capabilities	= V4L2_OUT_CAP_STD,
 		},
-		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.subdev_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
 		.default_mode	= "ntsc",
 		.num_modes	= ARRAY_SIZE(dm644xevm_enc_std_timing),
 		.modes		= dm644xevm_enc_std_timing,
@@ -702,7 +702,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = {
 			.type		= V4L2_OUTPUT_TYPE_ANALOG,
 			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
 		},
-		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.subdev_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
 		.default_mode	= "480p59_94",
 		.num_modes	= ARRAY_SIZE(dm644xevm_enc_preset_timing),
 		.modes		= dm644xevm_enc_preset_timing,
@@ -713,10 +713,10 @@ static struct vpbe_config dm644xevm_display_cfg = {
 	.module_name	= "dm644x-vpbe-display",
 	.i2c_adapter_id	= 1,
 	.osd		= {
-		.module_name	= VPBE_OSD_SUBDEV_NAME,
+		.module_name	= DM644X_VPBE_OSD_SUBDEV_NAME,
 	},
 	.venc		= {
-		.module_name	= VPBE_VENC_SUBDEV_NAME,
+		.module_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
 	},
 	.num_outputs	= ARRAY_SIZE(dm644xevm_vpbe_outputs),
 	.outputs	= dm644xevm_vpbe_outputs,
@@ -727,10 +727,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
 	&rtc_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init
 davinci_evm_map_io(void)
 {
@@ -750,32 +746,22 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
-
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-#define HAS_NOR 1
-#else
-#define HAS_NOR 0
-#endif
-
-#if defined(CONFIG_MTD_NAND_DAVINCI) || \
-    defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
-#define HAS_NAND 1
-#else
-#define HAS_NAND 0
-#endif
+#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+
+#define HAS_NOR		IS_ENABLED(CONFIG_MTD_PHYSMAP)
+
+#define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
 
 static __init void davinci_evm_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
@@ -792,6 +778,11 @@ static __init void davinci_evm_init(void)
 		/* only one device will be jumpered and detected */
 		if (HAS_NAND) {
 			platform_device_register(&davinci_evm_nandflash_device);
+
+			if (davinci_aemif_setup(&davinci_evm_nandflash_device))
+				pr_warn("%s: Cannot configure AEMIF.\n",
+					__func__);
+
 			evm_leds[7].default_trigger = "nand-disk";
 			if (HAS_NOR)
 				pr_warning("WARNING: both NAND and NOR flash "
@@ -807,17 +798,18 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	/* irlml6401 switches over 1A, in under 8 msec */
 	davinci_setup_usb(1000, 8);
 
-	soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-	/* Register the fixup for PHY on DaVinci */
-	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-					davinci_phy_fixup);
-
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+		/* Register the fixup for PHY on DaVinci */
+		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+						davinci_phy_fixup);
+	}
 }
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
@@ -825,7 +817,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 9211e8800c7..ae129bc4927 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/i2c/pcf857x.h>
 
 #include <media/tvp514x.h>
@@ -33,17 +33,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
 #include <linux/export.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/serial.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -90,6 +92,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
+	.ecc_bits		= 1,
 	.options		= 0,
 };
 
@@ -117,12 +120,7 @@ static struct platform_device davinci_nand_device = {
 	},
 };
 
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
+#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
 
 /* CPLD Register 0 bits to control ATA */
 #define DM646X_EVM_ATA_RST		BIT(0)
@@ -358,7 +356,7 @@ static int cpld_video_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit cpld_video_remove(struct i2c_client *client)
+static int cpld_video_remove(struct i2c_client *client)
 {
 	cpld_client = NULL;
 	return 0;
@@ -514,7 +512,7 @@ static const struct vpif_output dm6467_ch0_outputs[] = {
 			.index = 1,
 			.name = "Component",
 			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS,
+			.capabilities = V4L2_OUT_CAP_DV_TIMINGS,
 		},
 		.subdev_name = "adv7343",
 		.output_route = ADV7343_COMPONENT_ID,
@@ -754,10 +752,6 @@ static void __init davinci_map_io(void)
 	cdce_clk_init();
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
  * The following EDMA channels/slots are not being used by drivers (for
@@ -794,10 +788,15 @@ static struct edma_rsv_info dm646x_edma_rsv[] = {
 
 static __init void evm_init(void)
 {
+	int ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm646x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
@@ -806,6 +805,9 @@ static __init void evm_init(void)
 
 	platform_device_register(&davinci_nand_device);
 
+	if (davinci_aemif_setup(&davinci_nand_device))
+		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
 	dm646x_init_edma(dm646x_edma_rsv);
 
 	if (HAS_ATA)
@@ -818,7 +820,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
@@ -829,7 +831,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 43e4a0d663f..96fc00a167f 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -15,7 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/etherdevice.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -27,6 +27,7 @@
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 #include <mach/mux.h>
 #include <linux/platform_data/spi-davinci.h>
 
@@ -432,11 +433,10 @@ static void __init mityomapl138_setup_nand(void)
 {
 	platform_add_devices(mityomapl138_devices,
 				 ARRAY_SIZE(mityomapl138_devices));
-}
 
-static struct davinci_uart_config mityomapl138_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
+	if (davinci_aemif_setup(&mityomapl138_nandflash_device))
+		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+}
 
 static const short mityomap_mii_pins[] = {
 	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
@@ -517,7 +517,7 @@ static void __init mityomapl138_init(void)
 	if (ret)
 		pr_warning("watchdog registration failed: %d\n", ret);
 
-	davinci_serial_init(&mityomapl138_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
 	if (ret)
@@ -529,8 +529,13 @@ static void __init mityomapl138_init(void)
 
 	mityomapl138_setup_nand();
 
-	ret = da8xx_register_spi(1, mityomapl138_spi_flash_info,
-			       ARRAY_SIZE(mityomapl138_spi_flash_info));
+	ret = spi_register_board_info(mityomapl138_spi_flash_info,
+				      ARRAY_SIZE(mityomapl138_spi_flash_info));
+	if (ret)
+		pr_warn("spi info registration failed: %d\n", ret);
+
+	ret = da8xx_register_spi_bus(1,
+				     ARRAY_SIZE(mityomapl138_spi_flash_info));
 	if (ret)
 		pr_warning("spi 1 registration failed: %d\n", ret);
 
@@ -570,7 +575,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.atag_offset	= 0x100,
 	.map_io		= mityomapl138_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= mityomapl138_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 3e3e3afebf8..bb680af9837 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -26,17 +26,18 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -88,6 +89,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
 	.parts		= davinci_ntosd2_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 };
 
@@ -153,10 +155,6 @@ static struct platform_device *davinci_ntosd2_devices[] __initdata = {
 	&ntosd2_leds_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_ntosd2_map_io(void)
 {
 	dm644x_init();
@@ -164,29 +162,22 @@ static void __init davinci_ntosd2_map_io(void)
 
 static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 	.wires		= 4,
-	.version	= MMC_CTLR_VERSION_1
 };
 
+#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
 
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-	defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
-
-#if defined(CONFIG_MTD_NAND_DAVINCI) || \
-	defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
-#define HAS_NAND 1
-#else
-#define HAS_NAND 0
-#endif
+#define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
 
 static __init void davinci_ntosd2_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
@@ -209,7 +200,7 @@ static __init void davinci_ntosd2_init(void)
 	platform_add_devices(davinci_ntosd2_devices,
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);
 
 	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
@@ -237,7 +228,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.atag_offset	= 0x100,
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_ntosd2_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index dc1208e9e66..2aac51d0e85 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -13,10 +13,12 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -48,8 +50,7 @@ static __init void omapl138_hawk_config_emac(void)
 	val &= ~BIT(8);
 	ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
 	if (ret) {
-		pr_warning("%s: cpgmac/mii mux setup failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
 		return;
 	}
 
@@ -61,8 +62,7 @@ static __init void omapl138_hawk_config_emac(void)
 
 	ret = da8xx_register_emac();
 	if (ret)
-		pr_warning("%s: emac registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
 }
 
 /*
@@ -138,7 +138,6 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static __init void omapl138_hawk_mmc_init(void)
@@ -147,15 +146,14 @@ static __init void omapl138_hawk_mmc_init(void)
 
 	ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
 	if (ret) {
-		pr_warning("%s: MMC/SD0 mux setup failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
 		return;
 	}
 
 	ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
 			GPIOF_DIR_IN, "MMC CD");
 	if (ret < 0) {
-		pr_warning("%s: can not open GPIO %d\n",
+		pr_warn("%s: can not open GPIO %d\n",
 			__func__, DA850_HAWK_MMCSD_CD_PIN);
 		return;
 	}
@@ -163,15 +161,14 @@ static __init void omapl138_hawk_mmc_init(void)
 	ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
 			GPIOF_DIR_IN, "MMC WP");
 	if (ret < 0) {
-		pr_warning("%s: can not open GPIO %d\n",
+		pr_warn("%s: can not open GPIO %d\n",
 			__func__, DA850_HAWK_MMCSD_WP_PIN);
 		goto mmc_setup_wp_fail;
 	}
 
 	ret = da8xx_register_mmcsd0(&da850_mmc_config);
 	if (ret) {
-		pr_warning("%s: MMC/SD0 registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
 		goto mmc_setup_mmcsd_fail;
 	}
 
@@ -216,7 +213,7 @@ static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
 		hawk_usb_ocic_handler = handler;
 
 		error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
-					IRQF_DISABLED | IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_RISING |
 					IRQF_TRIGGER_FALLING,
 					"OHCI over-current indicator", NULL);
 		if (error)
@@ -250,8 +247,7 @@ static __init void omapl138_hawk_usb_init(void)
 
 	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
 	if (ret) {
-		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
 		return;
 	}
 
@@ -280,8 +276,7 @@ static __init void omapl138_hawk_usb_init(void)
 
 	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
 	if (ret) {
-		pr_warning("%s: USB 1.1 registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
 		goto usb11_setup_fail;
 	}
 
@@ -293,22 +288,21 @@ usb11_setup_oc_fail:
 	gpio_free(DA850_USB1_VBUS_PIN);
 }
 
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
-	davinci_serial_init(&omapl138_hawk_uart_config);
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
+	davinci_serial_init(da8xx_serial_device);
 
 	omapl138_hawk_config_emac();
 
 	ret = da850_register_edma(da850_edma_rsv);
 	if (ret)
-		pr_warning("%s: EDMA registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
 
 	omapl138_hawk_mmc_init();
 
@@ -316,9 +310,13 @@ static __init void omapl138_hawk_init(void)
 
 	ret = da8xx_register_watchdog();
 	if (ret)
-		pr_warning("omapl138_hawk_init: "
-			"watchdog registration failed: %d\n",
-			ret);
+		pr_warn("%s: watchdog registration failed: %d\n",
+			__func__, ret);
+
+	ret = da8xx_register_rproc();
+	if (ret)
+		pr_warn("%s: dsp/rproc registration failed: %d\n",
+			__func__, ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -341,9 +339,10 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.atag_offset	= 0x100,
 	.map_io		= omapl138_hawk_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= omapl138_hawk_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
+	.reserve	= da8xx_rproc_reserve_cma,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 6957787fa7f..41c7c961579 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -125,10 +125,6 @@ static struct platform_device *davinci_sffsdr_devices[] __initdata = {
 	&davinci_sffsdr_nandflash_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_sffsdr_map_io(void)
 {
 	dm644x_init();
@@ -141,7 +137,7 @@ static __init void davinci_sffsdr_init(void)
 	platform_add_devices(davinci_sffsdr_devices,
 			     ARRAY_SIZE(davinci_sffsdr_devices));
 	sffsdr_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
 	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 
@@ -151,11 +147,10 @@ static __init void davinci_sffsdr_init(void)
 }
 
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
-	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_sffsdr_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
deleted file mode 100644
index be3099733b1..00000000000
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Texas Instruments TNETV107X EVM Board Support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ratelimit.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/edma.h>
-#include <mach/mux.h>
-#include <mach/cp_intc.h>
-#include <mach/tnetv107x.h>
-
-#define EVM_MMC_WP_GPIO		21
-#define EVM_MMC_CD_GPIO		24
-#define EVM_SPI_CS_GPIO		54
-
-static int initialize_gpio(int gpio, char *desc)
-{
-	int ret;
-
-	ret = gpio_request(gpio, desc);
-	if (ret < 0) {
-		pr_err_ratelimited("cannot open %s gpio\n", desc);
-		return -ENOSYS;
-	}
-	gpio_direction_input(gpio);
-	return gpio;
-}
-
-static int mmc_get_cd(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 0 : 1;
-}
-
-static int mmc_get_ro(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 1 : 0;
-}
-
-static struct davinci_mmc_config mmc_config = {
-	.get_cd		= mmc_get_cd,
-	.get_ro		= mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_1,
-};
-
-static const short sdio1_pins[] __initconst = {
-	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
-	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_GPIO21,		TNETV107X_GPIO24,
-	-1
-};
-
-static const short uart1_pins[] __initconst = {
-	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
-	-1
-};
-
-static const short ssp_pins[] __initconst = {
-	TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
-	TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
-	TNETV107X_SSP1_3, -1
-};
-
-static struct mtd_partition nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 12 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= (12*SZ_128K),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_nand_pdata nand_config = {
-	.mask_cle	= 0x4000,
-	.mask_ale	= 0x2000,
-	.parts		= nand_partitions,
-	.nr_parts	= ARRAY_SIZE(nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.ecc_bits	= 1,
-};
-
-static struct davinci_uart_config serial_config __initconst = {
-	.enabled_uarts	= BIT(1),
-};
-
-static const uint32_t keymap[] = {
-	KEY(0, 0, KEY_NUMERIC_1),
-	KEY(0, 1, KEY_NUMERIC_2),
-	KEY(0, 2, KEY_NUMERIC_3),
-	KEY(0, 3, KEY_FN_F1),
-	KEY(0, 4, KEY_MENU),
-
-	KEY(1, 0, KEY_NUMERIC_4),
-	KEY(1, 1, KEY_NUMERIC_5),
-	KEY(1, 2, KEY_NUMERIC_6),
-	KEY(1, 3, KEY_UP),
-	KEY(1, 4, KEY_FN_F2),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_8),
-	KEY(2, 2, KEY_NUMERIC_9),
-	KEY(2, 3, KEY_LEFT),
-	KEY(2, 4, KEY_ENTER),
-
-	KEY(3, 0, KEY_NUMERIC_STAR),
-	KEY(3, 1, KEY_NUMERIC_0),
-	KEY(3, 2, KEY_NUMERIC_POUND),
-	KEY(3, 3, KEY_DOWN),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_FN_F3),
-	KEY(4, 1, KEY_FN_F4),
-	KEY(4, 2, KEY_MUTE),
-	KEY(4, 3, KEY_HOME),
-	KEY(4, 4, KEY_BACK),
-
-	KEY(5, 0, KEY_VOLUMEDOWN),
-	KEY(5, 1, KEY_VOLUMEUP),
-	KEY(5, 2, KEY_F1),
-	KEY(5, 3, KEY_F2),
-	KEY(5, 4, KEY_F3),
-};
-
-static const struct matrix_keymap_data keymap_data = {
-	.keymap		= keymap,
-	.keymap_size	= ARRAY_SIZE(keymap),
-};
-
-static struct matrix_keypad_platform_data keypad_config = {
-	.keymap_data	= &keymap_data,
-	.num_row_gpios	= 6,
-	.num_col_gpios	= 5,
-	.debounce_ms	= 0, /* minimum */
-	.active_low	= 0, /* pull up realization */
-	.no_autorepeat	= 0,
-};
-
-static void spi_select_device(int cs)
-{
-	static int gpio;
-
-	if (!gpio) {
-		int ret;
-		ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel");
-		if (ret < 0) {
-			pr_err("cannot open spi chipsel gpio\n");
-			gpio = -ENOSYS;
-			return;
-		} else {
-			gpio = EVM_SPI_CS_GPIO;
-			gpio_direction_output(gpio, 0);
-		}
-	}
-
-	if (gpio < 0)
-		return;
-
-	return gpio_set_value(gpio, cs ? 1 : 0);
-}
-
-static struct ti_ssp_spi_data spi_master_data = {
-	.num_cs	= 2,
-	.select	= spi_select_device,
-	.iosel	= SSP_PIN_SEL(0, SSP_CLOCK)	| SSP_PIN_SEL(1, SSP_DATA) |
-		  SSP_PIN_SEL(2, SSP_CHIPSEL)	| SSP_PIN_SEL(3, SSP_IN)   |
-		  SSP_INPUT_SEL(3),
-};
-
-static struct ti_ssp_data ssp_config = {
-	.out_clock	= 250 * 1000,
-	.dev_data	= {
-		[1] = {
-			.dev_name = "ti-ssp-spi",
-			.pdata = &spi_master_data,
-			.pdata_size = sizeof(spi_master_data),
-		},
-	},
-};
-
-static struct tnetv107x_device_info evm_device_info __initconst = {
-	.serial_config		= &serial_config,
-	.mmc_config[1]		= &mmc_config,	/* controller 1 */
-	.nand_config[0]		= &nand_config,	/* chip select 0 */
-	.keypad_config		= &keypad_config,
-	.ssp_config		= &ssp_config,
-};
-
-static struct spi_board_info spi_info[] __initconst = {
-};
-
-static __init void tnetv107x_evm_board_init(void)
-{
-	davinci_cfg_reg_list(sdio1_pins);
-	davinci_cfg_reg_list(uart1_pins);
-	davinci_cfg_reg_list(ssp_pins);
-
-	tnetv107x_devices_init(&evm_device_info);
-
-	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init tnetv107x_evm_console_init(void)
-{
-	return add_preferred_console("ttyS", 0, "115200");
-}
-console_initcall(tnetv107x_evm_console_init);
-#endif
-
-MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.atag_offset	= 0x100,
-	.map_io		= tnetv107x_init,
-	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
-	.init_machine	= tnetv107x_evm_board_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.restart	= tnetv107x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c
index f2232ca6d07..abafb92031c 100644
--- a/arch/arm/mach-davinci/cdce949.c
+++ b/arch/arm/mach-davinci/cdce949.c
@@ -256,7 +256,7 @@ static int cdce_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit cdce_remove(struct i2c_client *client)
+static int cdce_remove(struct i2c_client *client)
 {
 	cdce_i2c_client = NULL;
 	return 0;
@@ -274,7 +274,7 @@ static struct i2c_driver cdce_driver = {
 		.name	= "cdce949",
 	},
 	.probe		= cdce_probe,
-	.remove		= __devexit_p(cdce_remove),
+	.remove		= cdce_remove,
 	.id_table	= cdce_id,
 };
 
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 34668ead53c..985e5fd00fb 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -35,23 +35,64 @@ static void __clk_enable(struct clk *clk)
 {
 	if (clk->parent)
 		__clk_enable(clk->parent);
-	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
-				true, clk->flags);
+	if (clk->usecount++ == 0) {
+		if (clk->flags & CLK_PSC)
+			davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
+					   true, clk->flags);
+		else if (clk->clk_enable)
+			clk->clk_enable(clk);
+	}
 }
 
 static void __clk_disable(struct clk *clk)
 {
 	if (WARN_ON(clk->usecount == 0))
 		return;
-	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
-	    (clk->flags & CLK_PSC))
-		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
-				false, clk->flags);
+	if (--clk->usecount == 0) {
+		if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC))
+			davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
+					   false, clk->flags);
+		else if (clk->clk_disable)
+			clk->clk_disable(clk);
+	}
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
 
+int davinci_clk_reset(struct clk *clk, bool reset)
+{
+	unsigned long flags;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->flags & CLK_PSC)
+		davinci_psc_reset(clk->gpsc, clk->lpsc, reset);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(davinci_clk_reset);
+
+int davinci_clk_reset_assert(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk) || !clk->reset)
+		return -EINVAL;
+
+	return clk->reset(clk, true);
+}
+EXPORT_SYMBOL(davinci_clk_reset_assert);
+
+int davinci_clk_reset_deassert(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk) || !clk->reset)
+		return -EINVAL;
+
+	return clk->reset(clk, false);
+}
+EXPORT_SYMBOL(davinci_clk_reset_deassert);
+
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
@@ -92,7 +133,7 @@ EXPORT_SYMBOL(clk_get_rate);
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
+		return 0;
 
 	if (clk->round_rate)
 		return clk->round_rate(clk, rate);
@@ -535,7 +576,7 @@ int davinci_set_refclk_rate(unsigned long rate)
 }
 
 int __init davinci_clk_init(struct clk_lookup *clocks)
-  {
+{
 	struct clk_lookup *c;
 	struct clk *clk;
 	size_t num_clocks = 0;
@@ -576,6 +617,9 @@ int __init davinci_clk_init(struct clk_lookup *clocks)
 		if (clk->lpsc)
 			clk->flags |= CLK_PSC;
 
+		if (clk->flags & PSC_LRST)
+			clk->reset = davinci_clk_reset;
+
 		clk_register(clk);
 		num_clocks++;
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 46f0f1bf1a4..1e4e836173a 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -103,6 +103,9 @@ struct clk {
 	unsigned long (*recalc) (struct clk *);
 	int (*set_rate) (struct clk *clk, unsigned long rate);
 	int (*round_rate) (struct clk *clk, unsigned long rate);
+	int (*reset) (struct clk *clk, bool reset);
+	void (*clk_enable) (struct clk *clk);
+	void (*clk_disable) (struct clk *clk);
 };
 
 /* Clock flags: SoC-specific flags start at BIT(16) */
@@ -112,6 +115,7 @@ struct clk {
 #define PRE_PLL			BIT(4) /* source is before PLL mult/div */
 #define PSC_SWRSTDISABLE	BIT(5) /* Disable state is SwRstDisable */
 #define PSC_FORCE		BIT(6) /* Force module state transtition */
+#define PSC_LRST		BIT(8) /* Use local reset on enable/disable */
 
 #define CLK(dev, con, ck) 	\
 	{			\
@@ -126,6 +130,7 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
 int davinci_set_refclk_rate(unsigned long rate);
 int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
+int davinci_clk_reset(struct clk *clk, bool reset);
 
 extern struct platform_device davinci_wdt_device;
 extern void davinci_watchdog_reset(struct platform_device *);
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
deleted file mode 100644
index 4729eaab0f4..00000000000
--- a/arch/arm/mach-davinci/cpufreq.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * CPU frequency scaling for DaVinci
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
- *
- *  Copyright (C) 2005 Nokia Corporation
- *  Written by Tony Lindgren <tony@atomide.com>
- *
- *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Updated to support OMAP3
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/cpufreq.h>
-#include <mach/common.h>
-
-#include "clock.h"
-
-struct davinci_cpufreq {
-	struct device *dev;
-	struct clk *armclk;
-	struct clk *asyncclk;
-	unsigned long asyncrate;
-};
-static struct davinci_cpufreq cpufreq;
-
-static int davinci_verify_speed(struct cpufreq_policy *policy)
-{
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-	struct clk *armclk = cpufreq.armclk;
-
-	if (freq_table)
-		return cpufreq_frequency_table_verify(policy, freq_table);
-
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-
-	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
-	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-						policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static unsigned int davinci_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpufreq.armclk) / 1000;
-}
-
-static int davinci_target(struct cpufreq_policy *policy,
-				unsigned int target_freq, unsigned int relation)
-{
-	int ret = 0;
-	unsigned int idx;
-	struct cpufreq_freqs freqs;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct clk *armclk = cpufreq.armclk;
-
-	/*
-	 * Ensure desired rate is within allowed range.  Some govenors
-	 * (ondemand) will just pass target_freq=0 to get the minimum.
-	 */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	freqs.old = davinci_getspeed(0);
-	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
-	freqs.cpu = 0;
-
-	if (freqs.old == freqs.new)
-		return ret;
-
-	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
-	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
-						freqs.new, relation, &idx);
-	if (ret)
-		return -EINVAL;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old) {
-		ret = pdata->set_voltage(idx);
-		if (ret)
-			goto out;
-	}
-
-	ret = clk_set_rate(armclk, idx);
-	if (ret)
-		goto out;
-
-	if (cpufreq.asyncclk) {
-		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
-		if (ret)
-			goto out;
-	}
-
-	/* if moving to lower freq, lower the voltage after lowering freq */
-	if (pdata->set_voltage && freqs.new < freqs.old)
-		pdata->set_voltage(idx);
-
-out:
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int davinci_cpu_init(struct cpufreq_policy *policy)
-{
-	int result = 0;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/* Finish platform specific initialization */
-	if (pdata->init) {
-		result = pdata->init();
-		if (result)
-			return result;
-	}
-
-	policy->cur = policy->min = policy->max = davinci_getspeed(0);
-
-	if (freq_table) {
-		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-		if (!result)
-			cpufreq_frequency_table_get_attr(freq_table,
-							policy->cpu);
-	} else {
-		policy->cpuinfo.min_freq = policy->min;
-		policy->cpuinfo.max_freq = policy->max;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = davinci_getspeed(0);
-
-	/*
-	 * Time measurement across the target() function yields ~1500-1800us
-	 * time taken with no drivers on notification list.
-	 * Setting the latency to 2000 us to accommodate addition of drivers
-	 * to pre/post change notification list.
-	 */
-	policy->cpuinfo.transition_latency = 2000 * 1000;
-	return 0;
-}
-
-static int davinci_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct freq_attr *davinci_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver davinci_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= davinci_verify_speed,
-	.target		= davinci_target,
-	.get		= davinci_getspeed,
-	.init		= davinci_cpu_init,
-	.exit		= davinci_cpu_exit,
-	.name		= "davinci",
-	.attr		= davinci_cpufreq_attr,
-};
-
-static int __init davinci_cpufreq_probe(struct platform_device *pdev)
-{
-	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
-	struct clk *asyncclk;
-
-	if (!pdata)
-		return -EINVAL;
-	if (!pdata->freq_table)
-		return -EINVAL;
-
-	cpufreq.dev = &pdev->dev;
-
-	cpufreq.armclk = clk_get(NULL, "arm");
-	if (IS_ERR(cpufreq.armclk)) {
-		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
-		return PTR_ERR(cpufreq.armclk);
-	}
-
-	asyncclk = clk_get(cpufreq.dev, "async");
-	if (!IS_ERR(asyncclk)) {
-		cpufreq.asyncclk = asyncclk;
-		cpufreq.asyncrate = clk_get_rate(asyncclk);
-	}
-
-	return cpufreq_register_driver(&davinci_driver);
-}
-
-static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
-{
-	clk_put(cpufreq.armclk);
-
-	if (cpufreq.asyncclk)
-		clk_put(cpufreq.asyncclk);
-
-	return cpufreq_unregister_driver(&davinci_driver);
-}
-
-static struct platform_driver davinci_cpufreq_driver = {
-	.driver = {
-		.name	 = "cpufreq-davinci",
-		.owner	 = THIS_MODULE,
-	},
-	.remove = __exit_p(davinci_cpufreq_remove),
-};
-
-int __init davinci_cpufreq_init(void)
-{
-	return platform_driver_probe(&davinci_cpufreq_driver,
-							davinci_cpufreq_probe);
-}
-
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 9107691adbd..f1ac1c94ac0 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -25,53 +25,8 @@
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
-struct davinci_ops {
-	void (*enter) (u32 flags);
-	void (*exit) (u32 flags);
-	u32 flags;
-};
-
-/* Actual code that puts the SoC in different idle states */
-static int davinci_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-						int index)
-{
-	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
-	struct davinci_ops *ops = cpuidle_get_statedata(state_usage);
-
-	if (ops && ops->enter)
-		ops->enter(ops->flags);
-
-	index = cpuidle_wrap_enter(dev,	drv, index,
-				arm_cpuidle_simple_enter);
-
-	if (ops && ops->exit)
-		ops->exit(ops->flags);
-
-	return index;
-}
-
-/* fields in davinci_ops.flags */
-#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN	BIT(0)
-
-static struct cpuidle_driver davinci_idle_driver = {
-	.name			= "cpuidle-davinci",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= davinci_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "DDR SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = DAVINCI_CPUIDLE_MAX_STATES,
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
 static void __iomem *ddr2_reg_base;
+static bool ddr2_pdown;
 
 static void davinci_save_ddr_power(int enter, bool pdown)
 {
@@ -92,31 +47,36 @@ static void davinci_save_ddr_power(int enter, bool pdown)
 	__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
 }
 
-static void davinci_c2state_enter(u32 flags)
+/* Actual code that puts the SoC in different idle states */
+static int davinci_enter_idle(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int index)
 {
-	davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
-}
+	davinci_save_ddr_power(1, ddr2_pdown);
+	cpu_do_idle();
+	davinci_save_ddr_power(0, ddr2_pdown);
 
-static void davinci_c2state_exit(u32 flags)
-{
-	davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+	return index;
 }
 
-static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
-	[1] = {
-		.enter	= davinci_c2state_enter,
-		.exit	= davinci_c2state_exit,
+static struct cpuidle_driver davinci_idle_driver = {
+	.name			= "cpuidle-davinci",
+	.owner			= THIS_MODULE,
+	.states[0]		= ARM_CPUIDLE_WFI_STATE,
+	.states[1]		= {
+		.enter			= davinci_enter_idle,
+		.exit_latency		= 10,
+		.target_residency	= 10000,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "DDR SR",
+		.desc			= "WFI and DDR Self Refresh",
 	},
+	.state_count = DAVINCI_CPUIDLE_MAX_STATES,
 };
 
 static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 {
-	int ret;
-	struct cpuidle_device *device;
 	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
 
-	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
-
 	if (!pdata) {
 		dev_err(&pdev->dev, "cannot get platform data\n");
 		return -ENOENT;
@@ -124,26 +84,9 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 
 	ddr2_reg_base = pdata->ddr2_ctlr_base;
 
-	if (pdata->ddr2_pdown)
-		davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
-	cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]);
-
-	device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
-
-	ret = cpuidle_register_driver(&davinci_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register driver\n");
-		return ret;
-	}
-
-	ret = cpuidle_register_device(device);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register device\n");
-		cpuidle_unregister_driver(&davinci_idle_driver);
-		return ret;
-	}
+	ddr2_pdown = pdata->ddr2_pdown;
 
-	return 0;
+	return cpuidle_register(&davinci_idle_driver, NULL);
 }
 
 static struct platform_driver davinci_cpuidle_driver = {
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 678a54a64da..115d5736da8 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -20,7 +21,6 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -385,7 +385,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
 	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
 	CLK(NULL,		"timer0",	&timerp64_0_clk),
-	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK("davinci-wdt",	NULL,		&timerp64_1_clk),
 	CLK(NULL,		"arm_rom",	&arm_rom_clk),
 	CLK(NULL,		"scr0_ss",	&scr0_ss_clk),
 	CLK(NULL,		"scr1_ss",	&scr1_ss_clk),
@@ -394,10 +394,10 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"tpcc",		&tpcc_clk),
 	CLK(NULL,		"tptc0",	&tptc0_clk),
 	CLK(NULL,		"tptc1",	&tptc1_clk),
-	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("da830-mmc.0",	NULL,		&mmcsd_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK(NULL,		"ecap0",	&ecap0_clk),
@@ -417,6 +417,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",   "fck",          &emac_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
@@ -1150,6 +1151,15 @@ static struct davinci_id da830_ids[] = {
 	},
 };
 
+static struct davinci_gpio_platform_data da830_gpio_platform_data = {
+	.ngpio = 128,
+};
+
+int __init da830_register_gpio(void)
+{
+	return da8xx_register_gpio(&da830_gpio_platform_data);
+}
+
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
 		.base		= DA8XX_TIMER64P0_BASE,
@@ -1195,11 +1205,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 128,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 };
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 6b9154e9f90..45ce065e717 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/regulator/consumer.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -28,7 +29,6 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -76,6 +76,13 @@ static struct clk pll0_aux_clk = {
 	.flags		= CLK_PLL | PRE_PLL,
 };
 
+static struct clk pll0_sysclk1 = {
+	.name		= "pll0_sysclk1",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
 static struct clk pll0_sysclk2 = {
 	.name		= "pll0_sysclk2",
 	.parent		= &pll0_clk,
@@ -368,10 +375,62 @@ static struct clk sata_clk = {
 	.flags		= PSC_FORCE,
 };
 
+static struct clk dsp_clk = {
+	.name		= "dsp",
+	.parent		= &pll0_sysclk1,
+	.domain		= DAVINCI_GPSC_DSPDOMAIN,
+	.lpsc		= DA8XX_LPSC0_GEM,
+	.flags		= PSC_LRST | PSC_FORCE,
+};
+
+static struct clk ehrpwm_clk = {
+	.name		= "ehrpwm",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
+};
+
+#define DA8XX_EHRPWM_TBCLKSYNC	BIT(12)
+
+static void ehrpwm_tblck_enable(struct clk *clk)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+	val |= DA8XX_EHRPWM_TBCLKSYNC;
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+}
+
+static void ehrpwm_tblck_disable(struct clk *clk)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+	val &= ~DA8XX_EHRPWM_TBCLKSYNC;
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+}
+
+static struct clk ehrpwm_tbclk = {
+	.name		= "ehrpwm_tbclk",
+	.parent		= &ehrpwm_clk,
+	.clk_enable	= ehrpwm_tblck_enable,
+	.clk_disable	= ehrpwm_tblck_disable,
+};
+
+static struct clk ecap_clk = {
+	.name		= "ecap",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
+};
+
 static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
 	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk1",	&pll0_sysclk1),
 	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
 	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
 	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
@@ -384,7 +443,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
 	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
 	CLK(NULL,		"timer0",	&timerp64_0_clk),
-	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK("davinci-wdt",	NULL,		&timerp64_1_clk),
 	CLK(NULL,		"arm_rom",	&arm_rom_clk),
 	CLK(NULL,		"tpcc0",	&tpcc0_clk),
 	CLK(NULL,		"tptc0",	&tptc0_clk),
@@ -392,9 +451,9 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"tpcc1",	&tpcc1_clk),
 	CLK(NULL,		"tptc2",	&tptc2_clk),
 	CLK("pruss_uio",	"pruss",	&pruss_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
@@ -402,17 +461,22 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",	"fck",		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
-	CLK("davinci_mmc.0",	NULL,		&mmcsd0_clk),
-	CLK("davinci_mmc.1",	NULL,		&mmcsd1_clk),
+	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
+	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
 	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci",		NULL,		&sata_clk),
+	CLK("ahci_da850",		NULL,		&sata_clk),
+	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
+	CLK("ehrpwm",		"fck",		&ehrpwm_clk),
+	CLK("ehrpwm",		"tbclk",	&ehrpwm_tbclk),
+	CLK("ecap",		"fck",		&ecap_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -941,7 +1005,7 @@ static const struct da850_opp da850_opp_96 = {
 
 #define OPP(freq) 		\
 	{				\
-		.index = (unsigned int) &da850_opp_##freq,	\
+		.driver_data = (unsigned int) &da850_opp_##freq,	\
 		.frequency = freq * 1000, \
 	}
 
@@ -953,7 +1017,7 @@ static struct cpufreq_frequency_table da850_freq_table[] = {
 	OPP(200),
 	OPP(96),
 	{
-		.index		= 0,
+		.driver_data		= 0,
 		.frequency	= CPUFREQ_TABLE_END,
 	},
 };
@@ -981,7 +1045,7 @@ static int da850_set_voltage(unsigned int index)
 	if (!cvdd)
 		return -ENODEV;
 
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
+	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
 
 	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
 }
@@ -1028,20 +1092,21 @@ int da850_register_cpufreq(char *async_clk)
 
 static int da850_round_armrate(struct clk *clk, unsigned long rate)
 {
-	int i, ret = 0, diff;
+	int ret = 0, diff;
 	unsigned int best = (unsigned int) -1;
 	struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
+	struct cpufreq_frequency_table *pos;
 
 	rate /= 1000; /* convert to kHz */
 
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		diff = table[i].frequency - rate;
+	cpufreq_for_each_entry(pos, table) {
+		diff = pos->frequency - rate;
 		if (diff < 0)
 			diff = -diff;
 
 		if (diff < best) {
 			best = diff;
-			ret = table[i].frequency;
+			ret = pos->frequency;
 		}
 	}
 
@@ -1062,7 +1127,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
 	struct pll_data *pll = clk->pll_data;
 	int ret;
 
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
+	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
 	prediv = opp->prediv;
 	mult = opp->mult;
 	postdiv = opp->postdiv;
@@ -1217,6 +1282,15 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
+static struct davinci_gpio_platform_data da850_gpio_platform_data = {
+	.ngpio = 144,
+};
+
+int __init da850_register_gpio(void)
+{
+	return da8xx_register_gpio(&da850_gpio_platform_data);
+}
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -1234,11 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 144,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 37c27af18fa..ed1928740b5 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -20,13 +20,6 @@
 
 #define DA8XX_NUM_UARTS	3
 
-void __init da8xx_uart_clk_enable(void)
-{
-	int i;
-	for (i = 0; i < DA8XX_NUM_UARTS; i++)
-		davinci_serial_setup_clk(i, NULL);
-}
-
 static struct of_device_id da8xx_irq_match[] __initdata = {
 	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
 	{ }
@@ -37,13 +30,32 @@ static void __init da8xx_init_irq(void)
 	of_irq_init(da8xx_irq_match);
 }
 
+static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+	OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL),
+	OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
+	OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),
+	OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL),
+	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL),
+	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
+	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
+	OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL),
+	OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
+	OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
+		       NULL),
+	{}
+};
+
 #ifdef CONFIG_ARCH_DAVINCI_DA850
 
 static void __init da850_init_machine(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     da850_auxdata_lookup, NULL);
 
-	da8xx_uart_clk_enable();
 }
 
 static const char *da850_boards_compat[] __initdata = {
@@ -56,7 +68,7 @@ static const char *da850_boards_compat[] __initdata = {
 DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
 	.map_io		= da850_init,
 	.init_irq	= da8xx_init_irq,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da850_init_machine,
 	.dt_compat	= da850_boards_compat,
 	.init_late	= davinci_init_late,
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 12d544befcf..4ffc37accce 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -23,9 +23,9 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/davinci_asp.h>
+#include <linux/platform_data/edma.h>
 #include <linux/platform_data/keyscan-davinci.h>
 #include <mach/hardware.h>
-#include <mach/edma.h>
 
 #include <media/davinci/vpfe_capture.h>
 #include <media/davinci/vpif_types.h>
@@ -36,16 +36,26 @@
 #include <media/davinci/vpbe_osd.h>
 
 #define DAVINCI_SYSTEM_MODULE_BASE	0x01c40000
+#define SYSMOD_VDAC_CONFIG		0x2c
 #define SYSMOD_VIDCLKCTL		0x38
 #define SYSMOD_VPSS_CLKCTL		0x44
 #define SYSMOD_VDD3P3VPWDN		0x48
 #define SYSMOD_VSCLKDIS			0x6c
 #define SYSMOD_PUPDCTL1			0x7c
 
+/* VPSS CLKCTL bit definitions */
+#define VPSS_MUXSEL_EXTCLK_ENABLE	BIT(1)
+#define VPSS_VENCCLKEN_ENABLE		BIT(3)
+#define VPSS_DACCLKEN_ENABLE		BIT(4)
+#define VPSS_PLLC2SYSCLK5_ENABLE	BIT(5)
+
 extern void __iomem *davinci_sysmod_base;
 #define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
 void davinci_map_sysmod(void);
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+int davinci_gpio_register(struct resource *res, int size, void *pdata);
+
 /* DM355 base addresses */
 #define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
 #define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -69,34 +79,45 @@ void davinci_map_sysmod(void);
 #define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
 #define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
 
+int davinci_init_wdt(void);
+
 /* DM355 function declarations */
-void __init dm355_init(void);
+void dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
-void dm355_set_vpfe_config(struct vpfe_config *cfg);
+void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm355_gpio_register(void);
 
 /* DM365 function declarations */
-void __init dm365_init(void);
-void __init dm365_init_asp(struct snd_platform_data *pdata);
-void __init dm365_init_vc(struct snd_platform_data *pdata);
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
-void __init dm365_init_rtc(void);
+void dm365_init(void);
+void dm365_init_asp(struct snd_platform_data *pdata);
+void dm365_init_vc(struct snd_platform_data *pdata);
+void dm365_init_ks(struct davinci_ks_platform_data *pdata);
+void dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
 			const struct spi_board_info *info, unsigned len);
-void dm365_set_vpfe_config(struct vpfe_config *cfg);
+int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm365_gpio_register(void);
 
 /* DM644x function declarations */
-void __init dm644x_init(void);
-void __init dm644x_init_asp(struct snd_platform_data *pdata);
-int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+void dm644x_init(void);
+void dm644x_init_asp(struct snd_platform_data *pdata);
+int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm644x_gpio_register(void);
 
 /* DM646x function declarations */
-void __init dm646x_init(void);
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
-int __init dm646x_init_edma(struct edma_rsv_info *rsv);
+void dm646x_init(void);
+void dm646x_init_mcasp0(struct snd_platform_data *pdata);
+void dm646x_init_mcasp1(struct snd_platform_data *pdata);
+int dm646x_init_edma(struct edma_rsv_info *rsv);
 void dm646x_video_init(void);
 void dm646x_setup_vpif(struct vpif_display_config *,
 		       struct vpif_capture_config *);
+int dm646x_gpio_register(void);
+
+extern struct platform_device dm365_serial_device[];
+extern struct platform_device dm355_serial_device[];
+extern struct platform_device dm644x_serial_device[];
+extern struct platform_device dm646x_serial_device[];
 #endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c