aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/cm-x300.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/cm-x300.c')
-rw-r--r--arch/arm/mach-pxa/cm-x300.c104
1 files changed, 50 insertions, 54 deletions
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 7984268508b..4d3588d26c2 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -12,6 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/module.h>
#include <linux/kernel.h>
@@ -28,7 +29,8 @@
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/da903x.h>
#include <linux/regulator/machine.h>
@@ -42,16 +44,16 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
+#include <asm/system_info.h>
#include <mach/pxa300.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/i2c.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <asm/mach/map.h>
@@ -63,7 +65,7 @@
#define GPIO82_MMC_IRQ (82)
#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
+#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
@@ -161,10 +163,10 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
GPIO99_GPIO, /* Ethernet IRQ */
/* RTC GPIOs */
- GPIO95_GPIO, /* RTC CS */
- GPIO96_GPIO, /* RTC WR */
- GPIO97_GPIO, /* RTC RD */
- GPIO98_GPIO, /* RTC IO */
+ GPIO95_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC CS */
+ GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC WR */
+ GPIO97_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC RD */
+ GPIO98_GPIO, /* RTC IO */
/* Standard I2C */
GPIO21_I2C_SCL,
@@ -228,8 +230,8 @@ static struct resource dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
- .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -296,7 +298,7 @@ static struct pxafb_mach_info cm_x300_lcd = {
static void __init cm_x300_init_lcd(void)
{
- set_pxa_fb_info(&cm_x300_lcd);
+ pxa_set_fb_info(NULL, &cm_x300_lcd);
}
#else
static inline void cm_x300_init_lcd(void) {}
@@ -308,6 +310,7 @@ static struct platform_pwm_backlight_data cm_x300_backlight_data = {
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 10000,
+ .enable_gpio = -1,
};
static struct platform_device cm_x300_backlight_device = {
@@ -423,8 +426,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = cm_x300_nand_partitions,
- .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = cm_x300_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions),
};
static void __init cm_x300_init_nand(void)
@@ -484,14 +488,13 @@ static int cm_x300_ulpi_phy_reset(void)
int err;
/* reset the PHY */
- err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+ err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
+ "ulpi reset");
if (err) {
- pr_err("%s: failed to request ULPI reset GPIO: %d\n",
- __func__, err);
+ pr_err("failed to request ULPI reset GPIO: %d\n", err);
return err;
}
- gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
msleep(10);
gpio_set_value(GPIO_ULPI_PHY_RST, 1);
msleep(10);
@@ -510,8 +513,7 @@ static inline int cm_x300_u2d_init(struct device *dev)
pout_clk = clk_get(NULL, "CLK_POUT");
if (IS_ERR(pout_clk)) {
err = PTR_ERR(pout_clk);
- pr_err("%s: failed to get CLK_POUT: %d\n",
- __func__, err);
+ pr_err("failed to get CLK_POUT: %d\n", err);
return err;
}
clk_enable(pout_clk);
@@ -712,10 +714,7 @@ struct da9030_battery_info cm_x300_battery_info = {
};
static struct regulator_consumer_supply buck2_consumers[] = {
- {
- .dev = NULL,
- .supply = "vcc_core",
- },
+ REGULATOR_SUPPLY("vcc_core", NULL),
};
static struct regulator_init_data buck2_data = {
@@ -765,42 +764,37 @@ static void __init cm_x300_init_da9030(void)
{
pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
i2c_register_board_info(1, &cm_x300_pmic_info, 1);
- set_irq_wake(IRQ_WAKEUP0, 1);
+ irq_set_irq_wake(IRQ_WAKEUP0, 1);
}
+/* wi2wi gpio setting for system_rev >= 130 */
+static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
+ { 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
+ { 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
+};
+
static void __init cm_x300_init_wi2wi(void)
{
- int bt_reset, wlan_en;
int err;
if (system_rev < 130) {
- wlan_en = 77;
- bt_reset = 78;
- } else {
- wlan_en = 71;
- bt_reset = 70;
+ cm_x300_wi2wi_gpios[0].gpio = 77; /* wlan en */
+ cm_x300_wi2wi_gpios[1].gpio = 78; /* bt reset */
}
/* Libertas and CSR reset */
- err = gpio_request(wlan_en, "wlan en");
+ err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
if (err) {
- pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
- } else {
- gpio_direction_output(wlan_en, 1);
- gpio_free(wlan_en);
+ pr_err("failed to request wifi/bt gpios: %d\n", err);
+ return;
}
- err = gpio_request(bt_reset, "bt reset");
- if (err) {
- pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
- } else {
- gpio_direction_output(bt_reset, 1);
- udelay(10);
- gpio_set_value(bt_reset, 0);
- udelay(10);
- gpio_set_value(bt_reset, 1);
- gpio_free(bt_reset);
- }
+ udelay(10);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
+ udelay(10);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
+
+ gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
}
/* MFP */
@@ -843,8 +837,7 @@ static void __init cm_x300_init(void)
cm_x300_init_bl();
}
-static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
- char **cmdline, struct meminfo *mi)
+static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
{
/* Make sure that mi->bank[0].start = PHYS_ADDR */
for (; tags->hdr.size; tags = tag_next(tags))
@@ -856,10 +849,13 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
}
MACHINE_START(CM_X300, "CM-X300 module")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
- .timer = &pxa_timer,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
.init_machine = cm_x300_init,
.fixup = cm_x300_fixup,
+ .restart = pxa_restart,
MACHINE_END
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-11 01:44:49 +0000