diff options
Diffstat (limited to 'arch/arm/mach-pxa/Kconfig')
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 738 |
1 files changed, 482 insertions, 256 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8eea7306f29..e6690a44917 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,29 +2,130 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" -if PXA3xx +comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" -menu "Supported PXA3xx Processor Variants" +config MACH_PXA3XX_DT + bool "Support PXA3xx platforms from device tree" + select CPU_PXA300 + select POWER_SUPPLY + select PXA3xx + select USE_OF + help + Include support for Marvell PXA3xx based platforms using + the device tree. Needn't select any other machine while + MACH_PXA3XX_DT is enabled. -config CPU_PXA300 - bool "PXA300 (codename Monahans-L)" +config ARCH_LUBBOCK + bool "Intel DBPXA250 Development Platform (aka Lubbock)" + select PXA25x + select SA1111 -config CPU_PXA310 - bool "PXA310 (codename Monahans-LV)" +config MACH_MAINSTONE + bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" + select PXA27x + +config MACH_ZYLONITE + bool + select PXA3xx + +config MACH_ZYLONITE300 + bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" select CPU_PXA300 + select CPU_PXA310 + select MACH_ZYLONITE -config CPU_PXA320 - bool "PXA320 (codename Monahans-P)" +config MACH_ZYLONITE320 + bool "PXA3xx Development Platform (aka Zylonite) PXA320" + select CPU_PXA320 + select MACH_ZYLONITE -config CPU_PXA930 - bool "PXA930 (codename Tavor-P)" +config MACH_LITTLETON + bool "PXA3xx Form Factor Platform (aka Littleton)" + select CPU_PXA300 + select CPU_PXA310 + select PXA3xx -config CPU_PXA935 - bool "PXA935 (codename Tavor-P65)" +config MACH_TAVOREVB + bool "PXA930 Evaluation Board (aka TavorEVB)" + select CPU_PXA930 + select CPU_PXA935 + select PXA3xx + select FB + select FB_PXA -endmenu +config MACH_SAAR + bool "PXA930 Handheld Platform (aka SAAR)" + select CPU_PXA930 + select CPU_PXA935 + select PXA3xx + select FB + select FB_PXA -endif +comment "Third Party Dev Platforms (sorted by vendor name)" + +config ARCH_PXA_IDP + bool "Accelent Xscale IDP" + select PXA25x + +config ARCH_VIPER + bool "Arcom/Eurotech VIPER SBC" + select ARCOM_PCMCIA + select I2C_GPIO if I2C=y + select ISA + select PXA25x + select PXA_HAVE_ISA_IRQS + +config MACH_ARCOM_ZEUS + bool "Arcom/Eurotech ZEUS SBC" + select ARCOM_PCMCIA + select ISA + select PXA27x + select PXA_HAVE_ISA_IRQS + +config MACH_BALLOON3 + bool "Balloon 3 board" + select IWMMXT + select PXA27x + +config MACH_CSB726 + bool "Enable Cogent CSB726 System On a Module" + select IWMMXT + select PXA27x + help + Say Y here if you intend to run this kernel on a Cogent + CSB726 System On Module. + +config CSB726_CSB701 + bool "Enable support for CSB701 baseboard" + depends on MACH_CSB726 + +config MACH_ARMCORE + bool "CompuLab CM-X255/CM-X270 modules" + select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI + select IWMMXT + select MIGHT_HAVE_PCI + select NEED_MACH_IO_H if PCI + select PXA25x + select PXA27x + +config MACH_EM_X270 + bool "CompuLab EM-x270 platform" + select PXA27x + +config MACH_EXEDA + bool "CompuLab eXeda platform" + select PXA27x + +config MACH_CM_X300 + bool "CompuLab CM-X300 modules" + select CPU_PXA300 + select CPU_PXA310 + select PXA3xx + +config MACH_CAPC7117 + bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" + select CPU_PXA320 + select PXA3xx config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" @@ -40,44 +141,319 @@ choice config GUMSTIX_AM200EPD bool "Enable AM200EPD board support" +config GUMSTIX_AM300EPD + bool "Enable AM300EPD board support" + endchoice config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" + select IWMMXT select PXA27x + +config MACH_STARGATE2 + bool "Intel Stargate 2 Platform" select IWMMXT - select PXA_HAVE_BOARD_IRQS + select PXA27x -config ARCH_LUBBOCK - bool "Intel DBPXA250 Development Platform" +config MACH_XCEP + bool "Iskratel Electronics XCEP" + select MTD + select MTD_CFI + select MTD_CFI_INTELEXT + select MTD_PHYSMAP select PXA25x - select SA1111 - select PXA_HAVE_BOARD_IRQS + help + PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. + Tuned for usage in Libera instruments for particle accelerators. + +config TRIZEPS_PXA + bool "PXA based Keith und Koep Trizeps DIMM-Modules" + +config MACH_TRIZEPS4 + bool "Keith und Koep Trizeps4 DIMM-Module" + depends on TRIZEPS_PXA + select PXA27x + select TRIZEPS_PCMCIA + +config MACH_TRIZEPS4WL + bool "Keith und Koep Trizeps4-WL DIMM-Module" + depends on TRIZEPS_PXA + select MACH_TRIZEPS4 + select PXA27x + select TRIZEPS_PCMCIA + +choice + prompt "Select base board for Trizeps module" + depends on TRIZEPS_PXA + +config MACH_TRIZEPS_CONXS + bool "ConXS Eval Board" + +config MACH_TRIZEPS_UCONXS + bool "uConXS Eval Board" + +config MACH_TRIZEPS_ANY + bool "another Board" + +endchoice + +config ARCOM_PCMCIA + bool + help + Generic option for Arcom Viper/Zeus PCMCIA + +config TRIZEPS_PCMCIA + bool + help + Enable PCMCIA support for Trizeps modules config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS -config MACH_MAINSTONE - bool "Intel HCDDBBVA0 Development Platform" +config MACH_PCM027 + bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" + select IWMMXT select PXA27x - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS + +config MACH_PCM990_BASEBOARD + bool "PHYTEC PCM-990 development board" + depends on MACH_PCM027 + +choice + prompt "display on pcm990" + depends on MACH_PCM990_BASEBOARD + +config PCM990_DISPLAY_SHARP + bool "sharp lq084v1dg21 stn display" + +config PCM990_DISPLAY_NEC + bool "nec nl6448bc20_18d tft display" + +config PCM990_DISPLAY_NONE + bool "no display" + +endchoice + +config MACH_COLIBRI + bool "Toradex Colibri PXA270" + select PXA27x + +config MACH_COLIBRI_PXA270_INCOME + bool "Income s.r.o. PXA270 SBC" + depends on MACH_COLIBRI + select PXA27x + +config MACH_COLIBRI300 + bool "Toradex Colibri PXA300/310" + select CPU_PXA300 + select CPU_PXA310 + select PXA3xx + +config MACH_COLIBRI320 + bool "Toradex Colibri PXA320" + select CPU_PXA320 + select PXA3xx + +config MACH_COLIBRI_EVALBOARD + bool "Toradex Colibri Evaluation Carrier Board support" + depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 + +config MACH_VPAC270 + bool "Voipac PXA270" + select HAVE_PATA_PLATFORM + select PXA27x + help + PXA270 based Single Board Computer. + +comment "End-user Products (sorted by vendor name)" + +config MACH_H4700 + bool "HP iPAQ hx4700" + select IWMMXT + select PXA27x + +config MACH_H5000 + bool "HP iPAQ h5000" + select PXA25x + +config MACH_HIMALAYA + bool "HTC Himalaya Support" + select CPU_PXA26x + +config MACH_MAGICIAN + bool "Enable HTC Magician Support" + select IWMMXT + select PXA27x + +config MACH_MIOA701 + bool "Mitac Mio A701 Support" + select GPIO_SYSFS + select IWMMXT + select PXA27x + help + Say Y here if you intend to run this kernel on a + MIO A701. Currently there is only basic support + for this PDA. + +config PXA_EZX + bool "Motorola EZX Platform" + select IWMMXT + select PXA27x + +config MACH_EZX_A780 + bool "Motorola EZX A780" + default y + depends on PXA_EZX + +config MACH_EZX_E680 + bool "Motorola EZX E680" + default y + depends on PXA_EZX + +config MACH_EZX_A1200 + bool "Motorola EZX A1200" + default y + depends on PXA_EZX + +config MACH_EZX_A910 + bool "Motorola EZX A910" + default y + depends on PXA_EZX + +config MACH_EZX_E6 + bool "Motorola EZX E6" + default y + depends on PXA_EZX + +config MACH_EZX_E2 + bool "Motorola EZX E2" + default y + depends on PXA_EZX config MACH_MP900C bool "Nec Mobilepro 900/c" select PXA25x -config ARCH_PXA_IDP - bool "Accelent Xscale IDP" +config ARCH_PXA_PALM + bool "PXA based Palm PDAs" + +config MACH_PALM27X + bool + +config MACH_PALMTE2 + bool "Palm Tungsten|E2" + default y + depends on ARCH_PXA_PALM + select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|E2 + handheld computer. + +config MACH_PALMTC + bool "Palm Tungsten|C" + default y + depends on ARCH_PXA_PALM select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|C + handheld computer. + +config MACH_PALMT5 + bool "Palm Tungsten|T5" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|T5 + handheld computer. + +config MACH_PALMTX + bool "Palm T|X" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on a Palm T|X + handheld computer. + +config MACH_PALMZ72 + bool "Palm Zire 72" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on Palm Zire 72 + handheld computer. + +config MACH_PALMLD + bool "Palm LifeDrive" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on a Palm LifeDrive + handheld computer. + +config PALM_TREO + bool + depends on ARCH_PXA_PALM + +config MACH_CENTRO + bool "Palm Centro 685 (GSM)" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PALM_TREO + select PXA27x + help + Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) + smartphone. + +config MACH_TREO680 + bool "Palm Treo 680" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PALM_TREO + select PXA27x + help + Say Y here if you intend to run this kernel on Palm Treo 680 + smartphone. + +config MACH_RAUMFELD_RC + bool "Raumfeld Controller" + select CPU_PXA300 + select POWER_SUPPLY + select PXA3xx + +config MACH_RAUMFELD_CONNECTOR + bool "Raumfeld Connector" + select CPU_PXA300 + select POWER_SUPPLY + select PXA3xx + +config MACH_RAUMFELD_SPEAKER + bool "Raumfeld Speaker" + select CPU_PXA300 + select POWER_SUPPLY + select PXA3xx config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" - select SHARP_SCOOP select SHARP_PARAM + select SHARP_SCOOP help Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), @@ -85,20 +461,19 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. -config CORGI_SSP_DEPRECATED - bool - select PXA_SSP +config PXA_SHARPSL_DETECT_MACH_ID + bool "Detect machine ID at run-time in the decompressor" + depends on PXA_SHARPSL help - This option will include corgi_ssp.c and corgi_lcd.c - that corgi_ts.c and other legacy drivers (corgi_bl.c - and sharpsl_pm.c) may depend on. + Say Y here if you want the zImage decompressor to detect + the Zaurus machine ID at run-time. For latest kexec-based + boot loader, this is not necessary. config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO - select PXA_SSP config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" @@ -121,11 +496,11 @@ config MACH_HUSKY config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - select MACH_SPITZ select I2C select I2C_PXA + select MACH_SPITZ + select PXA27x + select PXA_SHARP_Cxx00 config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" @@ -143,21 +518,35 @@ config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x - select PXA_HAVE_BOARD_IRQS -config ARCH_VIPER - bool "Arcom/Eurotech VIPER SBC" - select PXA25x - select ISA - select I2C_GPIO - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS - select PXA_HAVE_ISA_IRQS +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. + +config TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on MACH_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config MACH_ICONTROL + bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" + select CPU_PXA320 + select PXA3xx config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" + select FB_W100 select PXA25x - select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" @@ -179,7 +568,6 @@ config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. @@ -188,7 +576,6 @@ config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. @@ -205,196 +592,13 @@ config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. -config TRIZEPS_PXA - bool "PXA based Keith und Koep Trizeps DIMM-Modules" - -config MACH_H5000 - bool "HP iPAQ h5000" - select PXA25x - -config MACH_TRIZEPS4 - bool "Keith und Koep Trizeps4 DIMM-Module" - depends on TRIZEPS_PXA - select TRIZEPS_PCMCIA - select PXA27x - -config MACH_TRIZEPS4WL - bool "Keith und Koep Trizeps4-WL DIMM-Module" - depends on TRIZEPS_PXA - select TRIZEPS_PCMCIA - select PXA27x - select PXA_SSP - -choice - prompt "Select base board for Trizeps module" - depends on TRIZEPS_PXA - -config MACH_TRIZEPS_CONXS - bool "ConXS Eval Board" - -config MACH_TRIZEPS_UCONXS - bool "uConXS Eval Board" - -config MACH_TRIZEPS_ANY - bool "another Board" - -endchoice - -config TRIZEPS_PCMCIA - bool - help - Enable PCMCIA support for Trizeps modules - -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" - select PXA27x - -config MACH_COLIBRI - bool "Toradex Colibri PX27x" - select PXA27x - -config MACH_ZYLONITE - bool "PXA3xx Development Platform (aka Zylonite)" - select PXA3xx - select PXA_SSP - select HAVE_PWM - -config MACH_LITTLETON - bool "PXA3xx Form Factor Platform (aka Littleton)" - select PXA3xx - select PXA_SSP - -config MACH_TAVOREVB - bool "PXA930 Evaluation Board (aka TavorEVB)" - select PXA3xx - select PXA930 - -config MACH_SAAR - bool "PXA930 Handheld Platform (aka SAAR)" - select PXA3xx - select PXA930 - -config MACH_ARMCORE - bool "CompuLab CM-X255/CM-X270 modules" - select PXA27x - select IWMMXT - select PXA25x - select PXA_SSP - -config MACH_CM_X300 - bool "CompuLab CM-X300 modules" - select PXA3xx - select CPU_PXA300 - -config MACH_MAGICIAN - bool "Enable HTC Magician Support" - select PXA27x - select IWMMXT - select PXA_HAVE_BOARD_IRQS - -config MACH_MIOA701 - bool "Mitac Mio A701 Support" - select PXA27x - select IWMMXT - select HAVE_PWM - select GPIO_SYSFS - help - Say Y here if you intend to run this kernel on a - MIO A701. Currently there is only basic support - for this PDA. - -config MACH_PCM027 - bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" - select PXA27x - select IWMMXT - select PXA_SSP - select PXA_HAVE_BOARD_IRQS - -config ARCH_PXA_PALM - bool "PXA based Palm PDAs" - select HAVE_PWM - -config MACH_PALMTX - bool "Palm T|X" - default y - depends on ARCH_PXA_PALM - select PXA27x - select IWMMXT - help - Say Y here if you intend to run this kernel on a Palm T|X - handheld computer. - -config MACH_PALMZ72 - bool "Palm Zire 72" - default y - depends on ARCH_PXA_PALM - select PXA27x - select IWMMXT - help - Say Y here if you intend to run this kernel on Palm Zire 72 - handheld computer. - -config MACH_PCM990_BASEBOARD - bool "PHYTEC PCM-990 development board" - select HAVE_PWM - depends on MACH_PCM027 - -choice - prompt "display on pcm990" - depends on MACH_PCM990_BASEBOARD - -config PCM990_DISPLAY_SHARP - bool "sharp lq084v1dg21 stn display" - -config PCM990_DISPLAY_NEC - bool "nec nl6448bc20_18d tft display" - -config PCM990_DISPLAY_NONE - bool "no display" - -endchoice - -config PXA_EZX - bool "Motorola EZX Platform" +config MACH_ZIPIT2 + bool "Zipit Z2 Handheld" select PXA27x - select IWMMXT - select HAVE_PWM - -config MACH_EZX_A780 - bool "Motorola EZX A780" - default y - depends on PXA_EZX - -config MACH_EZX_E680 - bool "Motorola EZX E680" - default y - depends on PXA_EZX - -config MACH_EZX_A1200 - bool "Motorola EZX A1200" - default y - depends on PXA_EZX - -config MACH_EZX_A910 - bool "Motorola EZX A910" - default y - depends on PXA_EZX - -config MACH_EZX_E6 - bool "Motorola EZX E6" - default y - depends on PXA_EZX - -config MACH_EZX_E2 - bool "Motorola EZX E2" - default y - depends on PXA_EZX - endmenu config PXA25x @@ -421,43 +625,65 @@ config PXA3xx help Select code specific to PXA3xx variants +config CPU_PXA300 + bool + select PXA3xx + help + PXA300 (codename Monahans-L) + +config CPU_PXA310 + bool + select CPU_PXA300 + select PXA310_ULPI if USB_ULPI + help + PXA310 (codename Monahans-LV) + +config CPU_PXA320 + bool + select PXA3xx + help + PXA320 (codename Monahans-P) + +config CPU_PXA930 + bool + select PXA3xx + help + PXA930 (codename Tavor-P) + +config CPU_PXA935 + bool + select CPU_PXA930 + help + PXA935 (codename Tavor-P65) + config PXA_SHARP_C7xx bool - select PXA_SSP select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool - select PXA_SSP select SHARPSL_PM help Enable common support for Sharp Cxx00 models -config PXA_SSP - tristate - help - Enable support for PXA2xx SSP ports - -config PXA_PWM - tristate - default BACKLIGHT_PWM - help - Enable support for PXA2xx/PXA3xx PWM controllers - -config TOSA_BT - tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" - depends on MACH_TOSA - select RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on tosa. +config SHARPSL_PM + bool + select APM_EMULATION + select SHARPSL_PM_MAX1111 -config PXA_HAVE_BOARD_IRQS +config SHARPSL_PM_MAX1111 bool + select HWMON + select SENSORS_MAX1111 + select SPI + select SPI_MASTER config PXA_HAVE_ISA_IRQS bool +config PXA310_ULPI + bool + endif |