diff options
Diffstat (limited to 'arch/arm/mach-orion5x/rd88f5182-setup.c')
| -rw-r--r-- | arch/arm/mach-orion5x/rd88f5182-setup.c | 93 |
1 files changed, 34 insertions, 59 deletions
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 96438b6b202..b576ef5f18a 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -19,8 +19,8 @@ #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <asm/mach-types.h> -#include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> @@ -53,12 +53,6 @@ #define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 #define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 -/* - * GPIO Debug LED - */ - -#define RD88F5182_GPIO_DBG_LED 0 - /***************************************************************************** * 16M NOR Flash on Device bus CS1 ****************************************************************************/ @@ -83,61 +77,38 @@ static struct platform_device rd88f5182_nor_flash = { .resource = &rd88f5182_nor_flash_resource, }; -#ifdef CONFIG_LEDS - /***************************************************************************** - * Use GPIO debug led as CPU active indication + * Use GPIO LED as CPU active indication ****************************************************************************/ -static void rd88f5182_dbgled_event(led_event_t evt) -{ - int val; - - if (evt == led_idle_end) - val = 1; - else if (evt == led_idle_start) - val = 0; - else - return; - - gpio_set_value(RD88F5182_GPIO_DBG_LED, val); -} - -static int __init rd88f5182_dbgled_init(void) -{ - int pin; - - if (machine_is_rd88f5182()) { - pin = RD88F5182_GPIO_DBG_LED; +#define RD88F5182_GPIO_LED 0 - if (gpio_request(pin, "DBGLED") == 0) { - if (gpio_direction_output(pin, 0) != 0) { - printk(KERN_ERR "rd88f5182_dbgled_init failed " - "to set output pin %d\n", pin); - gpio_free(pin); - return 0; - } - } else { - printk(KERN_ERR "rd88f5182_dbgled_init failed " - "to request gpio %d\n", pin); - return 0; - } - - leds_event = rd88f5182_dbgled_event; - } - - return 0; -} +static struct gpio_led rd88f5182_gpio_led_pins[] = { + { + .name = "rd88f5182:cpu", + .default_trigger = "cpu0", + .gpio = RD88F5182_GPIO_LED, + }, +}; -__initcall(rd88f5182_dbgled_init); +static struct gpio_led_platform_data rd88f5182_gpio_led_data = { + .leds = rd88f5182_gpio_led_pins, + .num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins), +}; -#endif +static struct platform_device rd88f5182_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &rd88f5182_gpio_led_data, + }, +}; /***************************************************************************** * PCI ****************************************************************************/ -void __init rd88f5182_pci_preinit(void) +static void __init rd88f5182_pci_preinit(void) { int pin; @@ -149,7 +120,7 @@ void __init rd88f5182_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " + printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } @@ -162,7 +133,7 @@ void __init rd88f5182_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " + printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } @@ -200,7 +171,6 @@ static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, static struct hw_pci rd88f5182_pci __initdata = { .nr_controllers = 2, .preinit = rd88f5182_pci_preinit, - .swizzle = pci_std_swizzle, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = rd88f5182_pci_map_irq, @@ -294,11 +264,16 @@ static void __init rd88f5182_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, - RD88F5182_NOR_BOOT_SIZE); - - orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1), + ORION_MBUS_DEVBUS_ATTR(1), + RD88F5182_NOR_BASE, + RD88F5182_NOR_SIZE); platform_device_register(&rd88f5182_nor_flash); + platform_device_register(&rd88f5182_gpio_leds); i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); } @@ -310,6 +285,6 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .restart = orion5x_restart, MACHINE_END |