diff options
Diffstat (limited to 'arch/arm/mach-orion5x/kurobox_pro-setup.c')
| -rw-r--r-- | arch/arm/mach-orion5x/kurobox_pro-setup.c | 81 |
1 files changed, 42 insertions, 39 deletions
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index dfbb68df7b0..fe6a48a325e 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,11 +21,10 @@ #include <linux/serial_reg.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> -#include <plat/orion_nand.h> +#include <linux/platform_data/mtd-orion_nand.h> #include "common.h" #include "mpp.h" @@ -119,7 +118,8 @@ static struct platform_device kurobox_pro_nor_flash = { * PCI ****************************************************************************/ -static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; @@ -138,7 +138,6 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) static struct hw_pci kurobox_pro_pci __initdata = { .nr_controllers = 2, - .swizzle = pci_std_swizzle, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = kurobox_pro_pci_map_irq, @@ -315,28 +314,28 @@ static void kurobox_pro_power_off(void) /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_UNUSED }, - { 2, MPP_GPIO }, /* GPIO Micon */ - { 3, MPP_GPIO }, /* GPIO Rtc */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_NAND }, /* NAND Flash REn */ - { 7, MPP_NAND }, /* NAND Flash WEn */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_UART }, /* UART1 CTSn */ - { 19, MPP_UART }, /* UART1 RTSn */ - { -1 }, +static unsigned int kurobox_pro_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_UNUSED, + MPP2_GPIO, /* GPIO Micon */ + MPP3_GPIO, /* GPIO Rtc */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_NAND, /* NAND Flash REn */ + MPP7_NAND, /* NAND Flash WEn */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_UART, /* UART1 CTSn */ + MPP19_UART, /* UART1 RTSn */ + 0, }; static void __init kurobox_pro_init(void) @@ -360,13 +359,17 @@ static void __init kurobox_pro_init(void) orion5x_uart1_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE); platform_device_register(&kurobox_pro_nor_flash); if (machine_is_kurobox_pro()) { - orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, - KUROBOX_PRO_NAND_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0), + ORION_MBUS_DEVBUS_ATTR(0), + KUROBOX_PRO_NAND_BASE, + KUROBOX_PRO_NAND_SIZE); platform_device_register(&kurobox_pro_nand_flash); } @@ -379,27 +382,27 @@ static void __init kurobox_pro_init(void) #ifdef CONFIG_MACH_KUROBOX_PRO MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END #endif #ifdef CONFIG_MACH_LINKSTATION_PRO MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END #endif |