diff options
Diffstat (limited to 'arch/arm/mach-orion5x/dns323-setup.c')
| -rw-r--r-- | arch/arm/mach-orion5x/dns323-setup.c | 179 |
1 files changed, 82 insertions, 97 deletions
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 90ab022eabe..56edeab17b6 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -13,7 +13,7 @@ * License, or (at your option) any later version. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> @@ -30,10 +30,11 @@ #include <linux/phy.h> #include <linux/marvell_phy.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #include <mach/orion5x.h> +#include <plat/orion-gpio.h> #include "common.h" #include "mpp.h" @@ -70,7 +71,7 @@ enum { * PCI setup */ -static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -86,7 +87,6 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) static struct hw_pci dns323_pci __initdata = { .nr_controllers = 2, - .swizzle = pci_std_swizzle, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = dns323_pci_map_irq, @@ -253,27 +253,6 @@ error_fail: * GPIO LEDs (simple - doesn't use hardware blinking support) */ -#define ORION_BLINK_HALF_PERIOD 100 /* ms */ - -static int dns323_gpio_blink_set(unsigned gpio, int state, - unsigned long *delay_on, unsigned long *delay_off) -{ - - if (delay_on && delay_off && !*delay_on && !*delay_off) - *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; - - switch(state) { - case GPIO_LED_NO_BLINK_LOW: - case GPIO_LED_NO_BLINK_HIGH: - orion_gpio_set_blink(gpio, 0); - gpio_set_value(gpio, state); - break; - case GPIO_LED_BLINK: - orion_gpio_set_blink(gpio, 1); - } - return 0; -} - static struct gpio_led dns323ab_leds[] = { { .name = "power:blue", @@ -312,13 +291,13 @@ static struct gpio_led dns323c_leds[] = { static struct gpio_led_platform_data dns323ab_led_data = { .num_leds = ARRAY_SIZE(dns323ab_leds), .leds = dns323ab_leds, - .gpio_blink_set = dns323_gpio_blink_set, + .gpio_blink_set = orion_gpio_led_blink_set, }; static struct gpio_led_platform_data dns323c_led_data = { .num_leds = ARRAY_SIZE(dns323c_leds), .leds = dns323c_leds, - .gpio_blink_set = dns323_gpio_blink_set, + .gpio_blink_set = orion_gpio_led_blink_set, }; static struct platform_device dns323_gpio_leds = { @@ -385,76 +364,76 @@ static struct mv_sata_platform_data dns323_sata_data = { /**************************************************************************** * General Setup */ -static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = { - { 0, MPP_PCIE_RST_OUTn }, - { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ - { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_UNUSED }, - { 4, MPP_GPIO }, /* power button LED */ - { 5, MPP_GPIO }, /* power button LED */ - { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ - { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ - { 8, MPP_GPIO }, /* triggers power off */ - { 9, MPP_GPIO }, /* power button switch */ - { 10, MPP_GPIO }, /* reset button switch */ - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_UNUSED }, - { 15, MPP_UNUSED }, - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int dns323a_mpp_modes[] __initdata = { + MPP0_PCIE_RST_OUTn, + MPP1_GPIO, /* right amber LED (sata ch0) */ + MPP2_GPIO, /* left amber LED (sata ch1) */ + MPP3_UNUSED, + MPP4_GPIO, /* power button LED */ + MPP5_GPIO, /* power button LED */ + MPP6_GPIO, /* GMT G751-2f overtemp */ + MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ + MPP8_GPIO, /* triggers power off */ + MPP9_GPIO, /* power button switch */ + MPP10_GPIO, /* reset button switch */ + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_UNUSED, + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; -static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ - { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_GPIO }, /* system up flag */ - { 4, MPP_GPIO }, /* power button LED */ - { 5, MPP_GPIO }, /* power button LED */ - { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ - { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ - { 8, MPP_GPIO }, /* triggers power off */ - { 9, MPP_GPIO }, /* power button switch */ - { 10, MPP_GPIO }, /* reset button switch */ - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, - { 13, MPP_SATA_LED }, - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int dns323b_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* right amber LED (sata ch0) */ + MPP2_GPIO, /* left amber LED (sata ch1) */ + MPP3_GPIO, /* system up flag */ + MPP4_GPIO, /* power button LED */ + MPP5_GPIO, /* power button LED */ + MPP6_GPIO, /* GMT G751-2f overtemp */ + MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ + MPP8_GPIO, /* triggers power off */ + MPP9_GPIO, /* power button switch */ + MPP10_GPIO, /* reset button switch */ + MPP11_UNUSED, + MPP12_SATA_LED, + MPP13_SATA_LED, + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; -static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* ? input */ - { 1, MPP_GPIO }, /* input power switch (0 = pressed) */ - { 2, MPP_GPIO }, /* output power off */ - { 3, MPP_UNUSED }, /* ? output */ - { 4, MPP_UNUSED }, /* ? output */ - { 5, MPP_UNUSED }, /* ? output */ - { 6, MPP_UNUSED }, /* ? output */ - { 7, MPP_UNUSED }, /* ? output */ - { 8, MPP_GPIO }, /* i/o right amber LED */ - { 9, MPP_GPIO }, /* i/o left amber LED */ - { 10, MPP_GPIO }, /* input */ - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, - { 13, MPP_SATA_LED }, - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_UNUSED }, - { 17, MPP_GPIO }, /* power button LED */ - { 18, MPP_GPIO }, /* fan speed bit 0 */ - { 19, MPP_GPIO }, /* fan speed bit 1 */ - { -1 }, +static unsigned int dns323c_mpp_modes[] __initdata = { + MPP0_GPIO, /* ? input */ + MPP1_GPIO, /* input power switch (0 = pressed) */ + MPP2_GPIO, /* output power off */ + MPP3_UNUSED, /* ? output */ + MPP4_UNUSED, /* ? output */ + MPP5_UNUSED, /* ? output */ + MPP6_UNUSED, /* ? output */ + MPP7_UNUSED, /* ? output */ + MPP8_GPIO, /* i/o right amber LED */ + MPP9_GPIO, /* i/o left amber LED */ + MPP10_GPIO, /* input */ + MPP11_UNUSED, + MPP12_SATA_LED, + MPP13_SATA_LED, + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_UNUSED, + MPP17_GPIO, /* power button LED */ + MPP18_GPIO, /* fan speed bit 0 */ + MPP19_GPIO, /* fan speed bit 1 */ + 0, }; /* Rev C1 Fan speed notes: @@ -632,7 +611,10 @@ static void __init dns323_init(void) /* setup flash mapping * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 */ - orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + DNS323_NOR_BOOT_BASE, + DNS323_NOR_BOOT_SIZE); platform_device_register(&dns323_nor_flash); /* Sort out LEDs, Buttons and i2c devices */ @@ -660,6 +642,8 @@ static void __init dns323_init(void) platform_device_register_simple("dns323c-fan", 0, NULL, 0); /* Register fixup for the PHY LEDs */ + if (!IS_BUILTIN(CONFIG_PHYLIB)) + break; phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK, dns323c_phy_fixup); @@ -722,7 +706,7 @@ static void __init dns323_init(void) * Note: AFAIK, rev B1 needs the same treatement but I'll let * somebody else test it. */ - writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c); + writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c); break; } } @@ -730,11 +714,12 @@ static void __init dns323_init(void) /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dns323_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END |