diff options
Diffstat (limited to 'arch/arm/mach-omap2/voltage.c')
| -rw-r--r-- | arch/arm/mach-omap2/voltage.c | 1584 |
1 files changed, 229 insertions, 1355 deletions
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 12be525b8df..3ac8fe1d821 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -7,8 +7,9 @@ * Rajendra Nayak <rnayak@ti.com> * Lesly A M <x0080970@ti.com> * - * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi + * Paul Walmsley * * Copyright (C) 2010 Texas Instruments, Inc. * Thara Gopinath <thara@ti.com> @@ -20,13 +21,13 @@ #include <linux/delay.h> #include <linux/io.h> -#include <linux/clk.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/debugfs.h> #include <linux/slab.h> +#include <linux/clk.h> -#include <plat/common.h> -#include <plat/voltage.h> +#include "common.h" #include "prm-regbits-34xx.h" #include "prm-regbits-44xx.h" @@ -35,1295 +36,104 @@ #include "prminst44xx.h" #include "control.h" -#define VP_IDLE_TIMEOUT 200 -#define VP_TRANXDONE_TIMEOUT 300 -#define VOLTAGE_DIR_SIZE 16 - -/* Voltage processor register offsets */ -struct vp_reg_offs { - u8 vpconfig; - u8 vstepmin; - u8 vstepmax; - u8 vlimitto; - u8 vstatus; - u8 voltage; -}; - -/* Voltage Processor bit field values, shifts and masks */ -struct vp_reg_val { - /* PRM module */ - u16 prm_mod; - /* VPx_VPCONFIG */ - u32 vpconfig_erroroffset; - u16 vpconfig_errorgain; - u32 vpconfig_errorgain_mask; - u8 vpconfig_errorgain_shift; - u32 vpconfig_initvoltage_mask; - u8 vpconfig_initvoltage_shift; - u32 vpconfig_timeouten; - u32 vpconfig_initvdd; - u32 vpconfig_forceupdate; - u32 vpconfig_vpenable; - /* VPx_VSTEPMIN */ - u8 vstepmin_stepmin; - u16 vstepmin_smpswaittimemin; - u8 vstepmin_stepmin_shift; - u8 vstepmin_smpswaittimemin_shift; - /* VPx_VSTEPMAX */ - u8 vstepmax_stepmax; - u16 vstepmax_smpswaittimemax; - u8 vstepmax_stepmax_shift; - u8 vstepmax_smpswaittimemax_shift; - /* VPx_VLIMITTO */ - u8 vlimitto_vddmin; - u8 vlimitto_vddmax; - u16 vlimitto_timeout; - u8 vlimitto_vddmin_shift; - u8 vlimitto_vddmax_shift; - u8 vlimitto_timeout_shift; - /* PRM_IRQSTATUS*/ - u32 tranxdone_status; -}; - -/* Voltage controller registers and offsets */ -struct vc_reg_info { - /* PRM module */ - u16 prm_mod; - /* VC register offsets */ - u8 smps_sa_reg; - u8 smps_volra_reg; - u8 bypass_val_reg; - u8 cmdval_reg; - u8 voltsetup_reg; - /*VC_SMPS_SA*/ - u8 smps_sa_shift; - u32 smps_sa_mask; - /* VC_SMPS_VOL_RA */ - u8 smps_volra_shift; - u32 smps_volra_mask; - /* VC_BYPASS_VAL */ - u8 data_shift; - u8 slaveaddr_shift; - u8 regaddr_shift; - u32 valid; - /* VC_CMD_VAL */ - u8 cmd_on_shift; - u8 cmd_onlp_shift; - u8 cmd_ret_shift; - u8 cmd_off_shift; - u32 cmd_on_mask; - /* PRM_VOLTSETUP */ - u8 voltsetup_shift; - u32 voltsetup_mask; -}; - -/** - * omap_vdd_info - Per Voltage Domain info - * - * @volt_data : voltage table having the distinct voltages supported - * by the domain and other associated per voltage data. - * @pmic_info : pmic specific parameters which should be populted by - * the pmic drivers. - * @vp_offs : structure containing the offsets for various - * vp registers - * @vp_reg : the register values, shifts, masks for various - * vp registers - * @vc_reg : structure containing various various vc registers, - * shifts, masks etc. - * @voltdm : pointer to the voltage domain structure - * @debug_dir : debug directory for this voltage domain. - * @curr_volt : current voltage for this vdd. - * @ocp_mod : The prm module for accessing the prm irqstatus reg. - * @prm_irqst_reg : prm irqstatus register. - * @vp_enabled : flag to keep track of whether vp is enabled or not - * @volt_scale : API to scale the voltage of the vdd. - */ -struct omap_vdd_info { - struct omap_volt_data *volt_data; - struct omap_volt_pmic_info *pmic_info; - struct vp_reg_offs vp_offs; - struct vp_reg_val vp_reg; - struct vc_reg_info vc_reg; - struct voltagedomain voltdm; - struct dentry *debug_dir; - u32 curr_volt; - u16 ocp_mod; - u8 prm_irqst_reg; - bool vp_enabled; - u32 (*read_reg) (u16 mod, u8 offset); - void (*write_reg) (u32 val, u16 mod, u8 offset); - int (*volt_scale) (struct omap_vdd_info *vdd, - unsigned long target_volt); -}; - -static struct omap_vdd_info *vdd_info; -/* - * Number of scalable voltage domains. - */ -static int nr_scalable_vdd; - -/* OMAP3 VDD sturctures */ -static struct omap_vdd_info omap3_vdd_info[] = { - { - .vp_offs = { - .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET, - .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET, - .vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET, - .vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET, - .vstatus = OMAP3_PRM_VP1_STATUS_OFFSET, - .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "mpu", - }, - }, - { - .vp_offs = { - .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET, - .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET, - .vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET, - .vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET, - .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET, - .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "core", - }, - }, -}; - -#define OMAP3_NR_SCALABLE_VDD ARRAY_SIZE(omap3_vdd_info) - -/* OMAP4 VDD sturctures */ -static struct omap_vdd_info omap4_vdd_info[] = { - { - .vp_offs = { - .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, - .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, - .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET, - .vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET, - .vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET, - .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "mpu", - }, - }, - { - .vp_offs = { - .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, - .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, - .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET, - .vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET, - .vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET, - .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "iva", - }, - }, - { - .vp_offs = { - .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, - .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, - .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET, - .vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET, - .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET, - .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "core", - }, - }, -}; - -#define OMAP4_NR_SCALABLE_VDD ARRAY_SIZE(omap4_vdd_info) - -/* - * Structures containing OMAP3430/OMAP3630 voltage supported and various - * voltage dependent data for each VDD. - */ -#define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain) \ -{ \ - .volt_nominal = _v_nom, \ - .sr_efuse_offs = _efuse_offs, \ - .sr_errminlimit = _errminlimit, \ - .vp_errgain = _errgain \ -} - -/* VDD1 */ -static struct omap_volt_data omap34xx_vddmpu_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap36xx_vddmpu_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16), - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23), - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -/* VDD2 */ -static struct omap_volt_data omap34xx_vddcore_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap36xx_vddcore_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -/* - * Structures containing OMAP4430 voltage supported and various - * voltage dependent data for each VDD. - */ -static struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = { - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap44xx_vdd_iva_volt_data[] = { - VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16), - VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap44xx_vdd_core_volt_data[] = { - VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct dentry *voltage_dir; - -/* Init function pointers */ -static void (*vc_init) (struct omap_vdd_info *vdd); -static int (*vdd_data_configure) (struct omap_vdd_info *vdd); - -static u32 omap3_voltage_read_reg(u16 mod, u8 offset) -{ - return omap2_prm_read_mod_reg(mod, offset); -} - -static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap2_prm_write_mod_reg(val, mod, offset); -} - -static u32 omap4_voltage_read_reg(u16 mod, u8 offset) -{ - return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - mod, offset); -} - -static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset); -} - -/* Voltage debugfs support */ -static int vp_volt_debug_get(void *data, u64 *val) -{ - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; - u8 vsel; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - vsel = vdd->read_reg(vdd->vp_reg.prm_mod, vdd->vp_offs.voltage); - pr_notice("curr_vsel = %x\n", vsel); - - if (!vdd->pmic_info->vsel_to_uv) { - pr_warning("PMIC function to convert vsel to voltage" - "in uV not registerd\n"); - return -EINVAL; - } - - *val = vdd->pmic_info->vsel_to_uv(vsel); - return 0; -} - -static int nom_volt_debug_get(void *data, u64 *val) -{ - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } +#include "voltage.h" +#include "powerdomain.h" - *val = omap_voltage_get_nom_volt(&vdd->voltdm); - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n"); -DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL, - "%llu\n"); -static void vp_latch_vsel(struct omap_vdd_info *vdd) -{ - u32 vpconfig; - u16 mod; - unsigned long uvdc; - char vsel; - - uvdc = omap_voltage_get_nom_volt(&vdd->voltdm); - if (!uvdc) { - pr_warning("%s: unable to find current voltage for vdd_%s\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_warning("%s: PMIC function to convert voltage in uV to" - " vsel not registered\n", __func__); - return; - } - - mod = vdd->vp_reg.prm_mod; - - vsel = vdd->pmic_info->uv_to_vsel(uvdc); - - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig &= ~(vdd->vp_reg.vpconfig_initvoltage_mask | - vdd->vp_reg.vpconfig_initvdd); - vpconfig |= vsel << vdd->vp_reg.vpconfig_initvoltage_shift; - - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vdd->write_reg((vpconfig | vdd->vp_reg.vpconfig_initvdd), mod, - vdd->vp_offs.vpconfig); - - /* Clear initVDD copy trigger bit */ - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); -} - -/* Generic voltage init functions */ -static void __init vp_init(struct omap_vdd_info *vdd) -{ - u32 vp_val; - u16 mod; - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return; - } - - mod = vdd->vp_reg.prm_mod; - - vp_val = vdd->vp_reg.vpconfig_erroroffset | - (vdd->vp_reg.vpconfig_errorgain << - vdd->vp_reg.vpconfig_errorgain_shift) | - vdd->vp_reg.vpconfig_timeouten; - vdd->write_reg(vp_val, mod, vdd->vp_offs.vpconfig); - - vp_val = ((vdd->vp_reg.vstepmin_smpswaittimemin << - vdd->vp_reg.vstepmin_smpswaittimemin_shift) | - (vdd->vp_reg.vstepmin_stepmin << - vdd->vp_reg.vstepmin_stepmin_shift)); - vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmin); - - vp_val = ((vdd->vp_reg.vstepmax_smpswaittimemax << - vdd->vp_reg.vstepmax_smpswaittimemax_shift) | - (vdd->vp_reg.vstepmax_stepmax << - vdd->vp_reg.vstepmax_stepmax_shift)); - vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmax); - - vp_val = ((vdd->vp_reg.vlimitto_vddmax << - vdd->vp_reg.vlimitto_vddmax_shift) | - (vdd->vp_reg.vlimitto_vddmin << - vdd->vp_reg.vlimitto_vddmin_shift) | - (vdd->vp_reg.vlimitto_timeout << - vdd->vp_reg.vlimitto_timeout_shift)); - vdd->write_reg(vp_val, mod, vdd->vp_offs.vlimitto); -} - -static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) -{ - char *name; - - name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL); - if (!name) { - pr_warning("%s: Unable to allocate memory for debugfs" - " directory name for vdd_%s", - __func__, vdd->voltdm.name); - return; - } - strcpy(name, "vdd_"); - strcat(name, vdd->voltdm.name); - - vdd->debug_dir = debugfs_create_dir(name, voltage_dir); - kfree(name); - if (IS_ERR(vdd->debug_dir)) { - pr_warning("%s: Unable to create debugfs directory for" - " vdd_%s\n", __func__, vdd->voltdm.name); - vdd->debug_dir = NULL; - return; - } - - (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vpconfig_errorgain)); - (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_reg.vstepmin_smpswaittimemin)); - (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vstepmin_stepmin)); - (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_reg.vstepmax_smpswaittimemax)); - (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vstepmax_stepmax)); - (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vlimitto_vddmax)); - (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vlimitto_vddmin)); - (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vlimitto_timeout)); - (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir, - (void *) vdd, &vp_volt_debug_fops); - (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, - vdd->debug_dir, (void *) vdd, - &nom_volt_debug_fops); -} - -/* Voltage scale and accessory APIs */ -static int _pre_volt_scale(struct omap_vdd_info *vdd, - unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) -{ - struct omap_volt_data *volt_data; - u32 vc_cmdval, vp_errgain_val; - u16 vp_mod, vc_mod; - - /* Check if suffiecient pmic info is available for this vdd */ - if (!vdd->pmic_info) { - pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - if (!vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC function to convert voltage in uV to" - "vsel not registered. Hence unable to scale voltage" - "for vdd_%s\n", __func__, vdd->voltdm.name); - return -ENODATA; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - vp_mod = vdd->vp_reg.prm_mod; - vc_mod = vdd->vc_reg.prm_mod; - - /* Get volt_data corresponding to target_volt */ - volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt); - if (IS_ERR(volt_data)) - volt_data = NULL; - - *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(vp_mod, vdd->vp_offs.voltage); - - /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(vc_mod, vdd->vc_reg.cmdval_reg); - vc_cmdval &= ~vdd->vc_reg.cmd_on_mask; - vc_cmdval |= (*target_vsel << vdd->vc_reg.cmd_on_shift); - vdd->write_reg(vc_cmdval, vc_mod, vdd->vc_reg.cmdval_reg); - - /* Setting vp errorgain based on the voltage */ - if (volt_data) { - vp_errgain_val = vdd->read_reg(vp_mod, - vdd->vp_offs.vpconfig); - vdd->vp_reg.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= ~vdd->vp_reg.vpconfig_errorgain_mask; - vp_errgain_val |= vdd->vp_reg.vpconfig_errorgain << - vdd->vp_reg.vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, vp_mod, - vdd->vp_offs.vpconfig); - } - - return 0; -} - -static void _post_volt_scale(struct omap_vdd_info *vdd, - unsigned long target_volt, u8 target_vsel, u8 current_vsel) -{ - u32 smps_steps = 0, smps_delay = 0; - - smps_steps = abs(target_vsel - current_vsel); - /* SMPS slew rate / step size. 2us added as buffer. */ - smps_delay = ((smps_steps * vdd->pmic_info->step_size) / - vdd->pmic_info->slew_rate) + 2; - udelay(smps_delay); - - vdd->curr_volt = target_volt; -} - -/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ -static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt) -{ - u32 loop_cnt = 0, retries_cnt = 0; - u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; - u16 mod; - u8 target_vsel, current_vsel; - int ret; - - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - mod = vdd->vc_reg.prm_mod; - - vc_valid = vdd->vc_reg.valid; - vc_bypass_val_reg = vdd->vc_reg.bypass_val_reg; - vc_bypass_value = (target_vsel << vdd->vc_reg.data_shift) | - (vdd->pmic_info->pmic_reg << - vdd->vc_reg.regaddr_shift) | - (vdd->pmic_info->i2c_slave_addr << - vdd->vc_reg.slaveaddr_shift); - - vdd->write_reg(vc_bypass_value, mod, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, mod, vc_bypass_val_reg); - - vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg); - /* - * Loop till the bypass command is acknowledged from the SMPS. - * NOTE: This is legacy code. The loop count and retry count needs - * to be revisited. - */ - while (!(vc_bypass_value & vc_valid)) { - loop_cnt++; - - if (retries_cnt > 10) { - pr_warning("%s: Retry count exceeded\n", __func__); - return -ETIMEDOUT; - } - - if (loop_cnt > 50) { - retries_cnt++; - loop_cnt = 0; - udelay(10); - } - vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg); - } - - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); - return 0; -} - -/* VP force update method of voltage scaling */ -static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt) -{ - u32 vpconfig; - u16 mod, ocp_mod; - u8 target_vsel, current_vsel, prm_irqst_reg; - int ret, timeout = 0; - - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - mod = vdd->vp_reg.prm_mod; - ocp_mod = vdd->ocp_mod; - prm_irqst_reg = vdd->prm_irqst_reg; - - /* - * Clear all pending TransactionDone interrupt/status. Typical latency - * is <3us - */ - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_reg.tranxdone_status, - ocp_mod, prm_irqst_reg); - if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) & - vdd->vp_reg.tranxdone_status)) - break; - udelay(1); - } - if (timeout >= VP_TRANXDONE_TIMEOUT) { - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." - "Voltage change aborted", __func__, vdd->voltdm.name); - return -ETIMEDOUT; - } - - /* Configure for VP-Force Update */ - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig &= ~(vdd->vp_reg.vpconfig_initvdd | - vdd->vp_reg.vpconfig_forceupdate | - vdd->vp_reg.vpconfig_initvoltage_mask); - vpconfig |= ((target_vsel << - vdd->vp_reg.vpconfig_initvoltage_shift)); - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vpconfig |= vdd->vp_reg.vpconfig_initvdd; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - - /* Force update of voltage */ - vpconfig |= vdd->vp_reg.vpconfig_forceupdate; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - - /* - * Wait for TransactionDone. Typical latency is <200us. - * Depends on SMPSWAITTIMEMIN/MAX and voltage change - */ - timeout = 0; - omap_test_timeout((vdd->read_reg(ocp_mod, prm_irqst_reg) & - vdd->vp_reg.tranxdone_status), - VP_TRANXDONE_TIMEOUT, timeout); - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_err("%s: vdd_%s TRANXDONE timeout exceeded." - "TRANXDONE never got set after the voltage update\n", - __func__, vdd->voltdm.name); - - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); - - /* - * Disable TransactionDone interrupt , clear all status, clear - * control registers - */ - timeout = 0; - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_reg.tranxdone_status, - ocp_mod, prm_irqst_reg); - if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) & - vdd->vp_reg.tranxdone_status)) - break; - udelay(1); - } - - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" - "to clear the TRANXDONE status\n", - __func__, vdd->voltdm.name); - - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - /* Clear initVDD copy trigger bit */ - vpconfig &= ~vdd->vp_reg.vpconfig_initvdd;; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - /* Clear force bit */ - vpconfig &= ~vdd->vp_reg.vpconfig_forceupdate; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - - return 0; -} - -/* OMAP3 specific voltage init functions */ - -/* - * Intializes the voltage controller registers with the PMIC and board - * specific parameters and voltage setup times for OMAP3. - */ -static void __init omap3_vc_init(struct omap_vdd_info *vdd) -{ - u32 vc_val; - u16 mod; - u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; - static bool is_initialized; - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return; - } - - mod = vdd->vc_reg.prm_mod; - - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg); - vc_val &= ~vdd->vc_reg.smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg); - - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg); - vc_val &= ~vdd->vc_reg.smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg); - - /*Configure the setup times */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.voltsetup_reg); - vc_val &= ~vdd->vc_reg.voltsetup_mask; - vc_val |= vdd->pmic_info->volt_setup_time << - vdd->vc_reg.voltsetup_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.voltsetup_reg); - - /* Set up the on, inactive, retention and off voltage */ - on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); - onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); - ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); - off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vdd->vc_reg.cmd_on_shift) | - (onlp_vsel << vdd->vc_reg.cmd_onlp_shift) | - (ret_vsel << vdd->vc_reg.cmd_ret_shift) | - (off_vsel << vdd->vc_reg.cmd_off_shift)); - vdd->write_reg(vc_val, mod, vdd->vc_reg.cmdval_reg); - - if (is_initialized) - return; - - /* Generic VC parameters init */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, mod, - OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, mod, - OMAP3_PRM_VC_I2C_CFG_OFFSET); - vdd->write_reg(OMAP3_CLKSETUP, mod, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, mod, OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, mod, OMAP3_PRM_VOLTSETUP2_OFFSET); - is_initialized = true; -} - -/* Sets up all the VDD related info for OMAP3 */ -static int __init omap3_vdd_data_configure(struct omap_vdd_info *vdd) -{ - struct clk *sys_ck; - u32 sys_clk_speed, timeout_val, waittime; - - if (!vdd->pmic_info) { - pr_err("%s: PMIC info requried to configure vdd_%s not" - "populated.Hence cannot initialize vdd_%s\n", - __func__, vdd->voltdm.name, vdd->voltdm.name); - return -EINVAL; - } - - if (!strcmp(vdd->voltdm.name, "mpu")) { - if (cpu_is_omap3630()) - vdd->volt_data = omap36xx_vddmpu_volt_data; - else - vdd->volt_data = omap34xx_vddmpu_volt_data; - - vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET; - vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT; - vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK; - vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA0_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA0_MASK; - vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT; - vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK; - } else if (!strcmp(vdd->voltdm.name, "core")) { - if (cpu_is_omap3630()) - vdd->volt_data = omap36xx_vddcore_volt_data; - else - vdd->volt_data = omap34xx_vddcore_volt_data; - - vdd->vp_reg.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET; - vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT; - vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK; - vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA1_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA1_MASK; - vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT; - vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK; - } else { - pr_warning("%s: vdd_%s does not exisit in OMAP3\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - /* - * Sys clk rate is require to calculate vp timeout value and - * smpswaittimemin and smpswaittimemax. - */ - sys_ck = clk_get(NULL, "sys_ck"); - if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, vdd->voltdm.name); - return -EINVAL; - } - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - /* Divide to avoid overflow */ - sys_clk_speed /= 1000; - - /* Generic voltage parameters */ - vdd->curr_volt = 1200000; - vdd->ocp_mod = OCP_MOD; - vdd->prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET; - vdd->read_reg = omap3_voltage_read_reg; - vdd->write_reg = omap3_voltage_write_reg; - vdd->volt_scale = vp_forceupdate_scale_voltage; - vdd->vp_enabled = false; - - /* VC parameters */ - vdd->vc_reg.prm_mod = OMAP3430_GR_MOD; - vdd->vc_reg.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET; - vdd->vc_reg.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET; - vdd->vc_reg.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET; - vdd->vc_reg.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET; - vdd->vc_reg.data_shift = OMAP3430_DATA_SHIFT; - vdd->vc_reg.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT; - vdd->vc_reg.regaddr_shift = OMAP3430_REGADDR_SHIFT; - vdd->vc_reg.valid = OMAP3430_VALID_MASK; - vdd->vc_reg.cmd_on_shift = OMAP3430_VC_CMD_ON_SHIFT; - vdd->vc_reg.cmd_on_mask = OMAP3430_VC_CMD_ON_MASK; - vdd->vc_reg.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT; - vdd->vc_reg.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT; - vdd->vc_reg.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT; - - vdd->vp_reg.prm_mod = OMAP3430_GR_MOD; - - /* VPCONFIG bit fields */ - vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset << - OMAP3430_ERROROFFSET_SHIFT); - vdd->vp_reg.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK; - vdd->vp_reg.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK; - vdd->vp_reg.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK; - vdd->vp_reg.vpconfig_initvdd = OMAP3430_INITVDD_MASK; - vdd->vp_reg.vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK; - vdd->vp_reg.vpconfig_vpenable = OMAP3430_VPENABLE_MASK; - - /* VSTEPMIN VSTEPMAX bit fields */ - waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * - sys_clk_speed) / 1000; - vdd->vp_reg.vstepmin_smpswaittimemin = waittime; - vdd->vp_reg.vstepmax_smpswaittimemax = waittime; - vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; - vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; - vdd->vp_reg.vstepmin_smpswaittimemin_shift = - OMAP3430_SMPSWAITTIMEMIN_SHIFT; - vdd->vp_reg.vstepmax_smpswaittimemax_shift = - OMAP3430_SMPSWAITTIMEMAX_SHIFT; - vdd->vp_reg.vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT; - vdd->vp_reg.vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT; - - /* VLIMITTO bit fields */ - timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; - vdd->vp_reg.vlimitto_timeout = timeout_val; - vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; - vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; - vdd->vp_reg.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT; - vdd->vp_reg.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT; - vdd->vp_reg.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT; - - return 0; -} - -/* OMAP4 specific voltage init functions */ -static void __init omap4_vc_init(struct omap_vdd_info *vdd) -{ - u32 vc_val; - u16 mod; - static bool is_initialized; - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return; - } - - mod = vdd->vc_reg.prm_mod; - - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg); - vc_val &= ~vdd->vc_reg.smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg); - - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg); - vc_val &= ~vdd->vc_reg.smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg); - - /* TODO: Configure setup times and CMD_VAL values*/ - - if (is_initialized) - return; - - /* Generic VC parameters init */ - vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | - OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | - OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); - - is_initialized = true; -} - -/* Sets up all the VDD related info for OMAP4 */ -static int __init omap4_vdd_data_configure(struct omap_vdd_info *vdd) -{ - struct clk *sys_ck; - u32 sys_clk_speed, timeout_val, waittime; - - if (!vdd->pmic_info) { - pr_err("%s: PMIC info requried to configure vdd_%s not" - "populated.Hence cannot initialize vdd_%s\n", - __func__, vdd->voltdm.name, vdd->voltdm.name); - return -EINVAL; - } - - if (!strcmp(vdd->voltdm.name, "mpu")) { - vdd->volt_data = omap44xx_vdd_mpu_volt_data; - vdd->vp_reg.tranxdone_status = - OMAP4430_VP_MPU_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET; - vdd->vc_reg.smps_sa_shift = - OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT; - vdd->vc_reg.smps_sa_mask = - OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK; - vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK; - vdd->vc_reg.voltsetup_reg = - OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET; - vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET; - } else if (!strcmp(vdd->voltdm.name, "core")) { - vdd->volt_data = omap44xx_vdd_core_volt_data; - vdd->vp_reg.tranxdone_status = - OMAP4430_VP_CORE_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = - OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET; - vdd->vc_reg.smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT; - vdd->vc_reg.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK; - vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK; - vdd->vc_reg.voltsetup_reg = - OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET; - vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET; - } else if (!strcmp(vdd->voltdm.name, "iva")) { - vdd->volt_data = omap44xx_vdd_iva_volt_data; - vdd->vp_reg.tranxdone_status = - OMAP4430_VP_IVA_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET; - vdd->vc_reg.smps_sa_shift = - OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT; - vdd->vc_reg.smps_sa_mask = - OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK; - vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK; - vdd->vc_reg.voltsetup_reg = - OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET; - vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET; - } else { - pr_warning("%s: vdd_%s does not exisit in OMAP4\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - /* - * Sys clk rate is require to calculate vp timeout value and - * smpswaittimemin and smpswaittimemax. - */ - sys_ck = clk_get(NULL, "sys_clkin_ck"); - if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, vdd->voltdm.name); - return -EINVAL; - } - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - /* Divide to avoid overflow */ - sys_clk_speed /= 1000; - - /* Generic voltage parameters */ - vdd->curr_volt = 1200000; - vdd->ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST; - vdd->read_reg = omap4_voltage_read_reg; - vdd->write_reg = omap4_voltage_write_reg; - vdd->volt_scale = vp_forceupdate_scale_voltage; - vdd->vp_enabled = false; - - /* VC parameters */ - vdd->vc_reg.prm_mod = OMAP4430_PRM_DEVICE_INST; - vdd->vc_reg.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET; - vdd->vc_reg.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET; - vdd->vc_reg.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET; - vdd->vc_reg.data_shift = OMAP4430_DATA_SHIFT; - vdd->vc_reg.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT; - vdd->vc_reg.regaddr_shift = OMAP4430_REGADDR_SHIFT; - vdd->vc_reg.valid = OMAP4430_VALID_MASK; - vdd->vc_reg.cmd_on_shift = OMAP4430_ON_SHIFT; - vdd->vc_reg.cmd_on_mask = OMAP4430_ON_MASK; - vdd->vc_reg.cmd_onlp_shift = OMAP4430_ONLP_SHIFT; - vdd->vc_reg.cmd_ret_shift = OMAP4430_RET_SHIFT; - vdd->vc_reg.cmd_off_shift = OMAP4430_OFF_SHIFT; - - vdd->vp_reg.prm_mod = OMAP4430_PRM_DEVICE_INST; - - /* VPCONFIG bit fields */ - vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset << - OMAP4430_ERROROFFSET_SHIFT); - vdd->vp_reg.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK; - vdd->vp_reg.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK; - vdd->vp_reg.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK; - vdd->vp_reg.vpconfig_initvdd = OMAP4430_INITVDD_MASK; - vdd->vp_reg.vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK; - vdd->vp_reg.vpconfig_vpenable = OMAP4430_VPENABLE_MASK; - - /* VSTEPMIN VSTEPMAX bit fields */ - waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * - sys_clk_speed) / 1000; - vdd->vp_reg.vstepmin_smpswaittimemin = waittime; - vdd->vp_reg.vstepmax_smpswaittimemax = waittime; - vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; - vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; - vdd->vp_reg.vstepmin_smpswaittimemin_shift = - OMAP4430_SMPSWAITTIMEMIN_SHIFT; - vdd->vp_reg.vstepmax_smpswaittimemax_shift = - OMAP4430_SMPSWAITTIMEMAX_SHIFT; - vdd->vp_reg.vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT; - vdd->vp_reg.vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT; - - /* VLIMITTO bit fields */ - timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; - vdd->vp_reg.vlimitto_timeout = timeout_val; - vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; - vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; - vdd->vp_reg.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT; - vdd->vp_reg.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT; - vdd->vp_reg.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT; +#include "vc.h" +#include "vp.h" - return 0; -} +static LIST_HEAD(voltdm_list); /* Public functions */ /** - * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage - * @voltdm: pointer to the VDD for which current voltage info is needed - * - * API to get the current non-auto-compensated voltage for a VDD. - * Returns 0 in case of error else returns the current voltage for the VDD. - */ -unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return 0; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - return vdd->curr_volt; -} - -/** - * omap_vp_get_curr_volt() - API to get the current vp voltage. - * @voltdm: pointer to the VDD. + * voltdm_get_voltage() - Gets the current non-auto-compensated voltage + * @voltdm: pointer to the voltdm for which current voltage info is needed * - * This API returns the current voltage for the specified voltage processor + * API to get the current non-auto-compensated voltage for a voltage domain. + * Returns 0 in case of error else returns the current voltage. */ -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm) { - struct omap_vdd_info *vdd; - u8 curr_vsel; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return 0; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg) { - pr_err("%s: No read API for reading vdd_%s regs\n", - __func__, voltdm->name); - return 0; - } - - curr_vsel = vdd->read_reg(vdd->vp_reg.prm_mod, - vdd->vp_offs.voltage); - - if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { - pr_warning("%s: PMIC function to convert vsel to voltage" - "in uV not registerd\n", __func__); - return 0; - } - - return vdd->pmic_info->vsel_to_uv(curr_vsel); -} - -/** - * omap_vp_enable() - API to enable a particular VP - * @voltdm: pointer to the VDD whose VP is to be enabled. - * - * This API enables a particular voltage processor. Needed by the smartreflex - * class drivers. - */ -void omap_vp_enable(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u32 vpconfig; - u16 mod; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - mod = vdd->vp_reg.prm_mod; - - /* If VP is already enabled, do nothing. Return */ - if (vdd->vp_enabled) - return; - - vp_latch_vsel(vdd); - - /* Enable VP */ - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig |= vdd->vp_reg.vpconfig_vpenable; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - vdd->vp_enabled = true; + return voltdm->nominal_volt; } /** - * omap_vp_disable() - API to disable a particular VP - * @voltdm: pointer to the VDD whose VP is to be disabled. + * voltdm_scale() - API to scale voltage of a particular voltage domain. + * @voltdm: pointer to the voltage domain which is to be scaled. + * @target_volt: The target voltage of the voltage domain * - * This API disables a particular voltage processor. Needed by the smartreflex - * class drivers. + * This API should be called by the kernel to do the voltage scaling + * for a particular voltage domain during DVFS. */ -void omap_vp_disable(struct voltagedomain *voltdm) +int voltdm_scale(struct voltagedomain *voltdm, + unsigned long target_volt) { - struct omap_vdd_info *vdd; - u32 vpconfig; - u16 mod; - int timeout; + int ret, i; + unsigned long volt = 0; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); - return; + return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", + if (!voltdm->scale) { + pr_err("%s: No voltage scale API registered for vdd_%s\n", __func__, voltdm->name); - return; + return -ENODATA; } - mod = vdd->vp_reg.prm_mod; - - /* If VP is already disabled, do nothing. Return */ - if (!vdd->vp_enabled) { - pr_warning("%s: Trying to disable VP for vdd_%s when" - "it is already disabled\n", __func__, voltdm->name); - return; + /* Adjust voltage to the exact voltage from the OPP table */ + for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { + if (voltdm->volt_data[i].volt_nominal >= target_volt) { + volt = voltdm->volt_data[i].volt_nominal; + break; + } } - /* Disable VP */ - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig &= ~vdd->vp_reg.vpconfig_vpenable; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); - - /* - * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us - */ - omap_test_timeout((vdd->read_reg(mod, vdd->vp_offs.vstatus)), - VP_IDLE_TIMEOUT, timeout); - - if (timeout >= VP_IDLE_TIMEOUT) - pr_warning("%s: vdd_%s idle timedout\n", - __func__, voltdm->name); - - vdd->vp_enabled = false; - - return; -} - -/** - * omap_voltage_scale_vdd() - API to scale voltage of a particular - * voltage domain. - * @voltdm: pointer to the VDD which is to be scaled. - * @target_volt: The target voltage of the voltage domain - * - * This API should be called by the kernel to do the voltage scaling - * for a particular voltage domain during dvfs or any other situation. - */ -int omap_voltage_scale_vdd(struct voltagedomain *voltdm, - unsigned long target_volt) -{ - struct omap_vdd_info *vdd; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + if (!volt) { + pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n", + __func__, target_volt); return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + ret = voltdm->scale(voltdm, volt); + if (!ret) + voltdm->nominal_volt = volt; - if (!vdd->volt_scale) { - pr_err("%s: No voltage scale API registered for vdd_%s\n", - __func__, voltdm->name); - return -ENODATA; - } - - return vdd->volt_scale(vdd, target_volt); + return ret; } /** - * omap_voltage_reset() - Resets the voltage of a particular voltage domain - * to that of the current OPP. - * @voltdm: pointer to the VDD whose voltage is to be reset. + * voltdm_reset() - Resets the voltage of a particular voltage domain + * to that of the current OPP. + * @voltdm: pointer to the voltage domain whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed - * to be at and resets the voltage to that level. Should be used expecially + * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ -void omap_voltage_reset(struct voltagedomain *voltdm) +void voltdm_reset(struct voltagedomain *voltdm) { - unsigned long target_uvdc; + unsigned long target_volt; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - target_uvdc = omap_voltage_get_nom_volt(voltdm); - if (!target_uvdc) { + target_volt = voltdm_get_voltage(voltdm); + if (!target_volt) { pr_err("%s: unable to find current voltage for vdd_%s\n", __func__, voltdm->name); return; } - omap_voltage_scale_vdd(voltdm, target_uvdc); + voltdm_scale(voltdm, target_volt); } /** @@ -1339,18 +149,14 @@ void omap_voltage_reset(struct voltagedomain *voltdm) * */ void omap_voltage_get_volttable(struct voltagedomain *voltdm, - struct omap_volt_data **volt_data) + struct omap_volt_data **volt_data) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - *volt_data = vdd->volt_data; + *volt_data = voltdm->volt_data; } /** @@ -1365,13 +171,12 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * This API searches only through the non-compensated voltages int the * voltage table. * Returns pointer to the voltage table entry corresponding to volt on - * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage + * success. Returns -ENODATA if no voltage table exisits for the passed voltage * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, - unsigned long volt) + unsigned long volt) { - struct omap_vdd_info *vdd; int i; if (!voltdm || IS_ERR(voltdm)) { @@ -1379,21 +184,19 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, return ERR_PTR(-EINVAL); } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - if (!vdd->volt_data) { + if (!voltdm->volt_data) { pr_warning("%s: voltage table does not exist for vdd_%s\n", __func__, voltdm->name); return ERR_PTR(-ENODATA); } - for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) { - if (vdd->volt_data[i].volt_nominal == volt) - return &vdd->volt_data[i]; + for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { + if (voltdm->volt_data[i].volt_nominal == volt) + return &voltdm->volt_data[i]; } - pr_notice("%s: Unable to match the current voltage with the voltage" - "table for vdd_%s\n", __func__, voltdm->name); + pr_notice("%s: Unable to match the current voltage with the voltage table for vdd_%s\n", + __func__, voltdm->name); return ERR_PTR(-ENODATA); } @@ -1402,54 +205,25 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, * omap_voltage_register_pmic() - API to register PMIC specific data * @voltdm: pointer to the VDD for which the PMIC specific data is * to be registered - * @pmic_info: the structure containing pmic info + * @pmic: the structure containing pmic info * * This API is to be called by the SOC/PMIC file to specify the - * pmic specific info as present in omap_volt_pmic_info structure. + * pmic specific info as present in omap_voltdm_pmic structure. */ int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) + struct omap_voltdm_pmic *pmic) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - vdd->pmic_info = pmic_info; + voltdm->pmic = pmic; return 0; } /** - * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory - * corresponding to a voltage domain. - * - * @voltdm: pointer to the VDD whose debug directory is required. - * - * This API returns pointer to the debugfs directory corresponding - * to the voltage domain. Should be used by drivers requiring to - * add any debug entry for a particular voltage domain. Returns NULL - * in case of error. - */ -struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return NULL; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - return vdd->debug_dir; -} - -/** * omap_change_voltscale_method() - API to change the voltage scaling method. * @voltdm: pointer to the VDD whose voltage scaling method * has to be changed. @@ -1460,113 +234,213 @@ struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) * defined in voltage.h */ void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) + int voltscale_method) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - switch (voltscale_method) { case VOLTSCALE_VPFORCEUPDATE: - vdd->volt_scale = vp_forceupdate_scale_voltage; + voltdm->scale = omap_vp_forceupdate_scale; return; case VOLTSCALE_VCBYPASS: - vdd->volt_scale = vc_bypass_scale_voltage; + voltdm->scale = omap_vc_bypass_scale; return; default: - pr_warning("%s: Trying to change the method of voltage scaling" - "to an unsupported one!\n", __func__); + pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n", + __func__); } } /** - * omap_voltage_domain_lookup() - API to get the voltage domain pointer - * @name: Name of the voltage domain + * omap_voltage_late_init() - Init the various voltage parameters * - * This API looks up in the global vdd_info struct for the - * existence of voltage domain <name>. If it exists, the API returns - * a pointer to the voltage domain structure corresponding to the - * VDD<name>. Else retuns error pointer. + * This API is to be called in the later stages of the + * system boot to init the voltage controller and + * voltage processors. */ -struct voltagedomain *omap_voltage_domain_lookup(char *name) +int __init omap_voltage_late_init(void) { - int i; + struct voltagedomain *voltdm; - if (!vdd_info) { - pr_err("%s: Voltage driver init not yet happened.Faulting!\n", + if (list_empty(&voltdm_list)) { + pr_err("%s: Voltage driver support not added\n", __func__); - return ERR_PTR(-EINVAL); + return -EINVAL; } - if (!name) { - pr_err("%s: No name to get the votage domain!\n", __func__); - return ERR_PTR(-EINVAL); + list_for_each_entry(voltdm, &voltdm_list, node) { + struct clk *sys_ck; + + if (!voltdm->scalable) + continue; + + sys_ck = clk_get(NULL, voltdm->sys_clk.name); + if (IS_ERR(sys_ck)) { + pr_warning("%s: Could not get sys clk.\n", __func__); + return -EINVAL; + } + voltdm->sys_clk.rate = clk_get_rate(sys_ck); + WARN_ON(!voltdm->sys_clk.rate); + clk_put(sys_ck); + + if (voltdm->vc) { + voltdm->scale = omap_vc_bypass_scale; + omap_vc_init_channel(voltdm); + } + + if (voltdm->vp) { + voltdm->scale = omap_vp_forceupdate_scale; + omap_vp_init(voltdm); + } } - for (i = 0; i < nr_scalable_vdd; i++) { - if (!(strcmp(name, vdd_info[i].voltdm.name))) - return &vdd_info[i].voltdm; + return 0; +} + +static struct voltagedomain *_voltdm_lookup(const char *name) +{ + struct voltagedomain *voltdm, *temp_voltdm; + + voltdm = NULL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + if (!strcmp(name, temp_voltdm->name)) { + voltdm = temp_voltdm; + break; + } } - return ERR_PTR(-EINVAL); + return voltdm; } /** - * omap_voltage_late_init() - Init the various voltage parameters + * voltdm_add_pwrdm - add a powerdomain to a voltagedomain + * @voltdm: struct voltagedomain * to add the powerdomain to + * @pwrdm: struct powerdomain * to associate with a voltagedomain * - * This API is to be called in the later stages of the - * system boot to init the voltage controller and - * voltage processors. + * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This + * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if + * presented with invalid pointers; -ENOMEM if memory could not be allocated; + * or 0 upon success. */ -int __init omap_voltage_late_init(void) +int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) { - int i; - - if (!vdd_info) { - pr_err("%s: Voltage driver support not added\n", - __func__); + if (!voltdm || !pwrdm) return -EINVAL; - } - voltage_dir = debugfs_create_dir("voltage", NULL); - if (IS_ERR(voltage_dir)) - pr_err("%s: Unable to create voltage debugfs main dir\n", - __func__); - for (i = 0; i < nr_scalable_vdd; i++) { - if (vdd_data_configure(&vdd_info[i])) - continue; - vc_init(&vdd_info[i]); - vp_init(&vdd_info[i]); - vdd_debugfs_init(&vdd_info[i]); - } + pr_debug("voltagedomain: %s: associating powerdomain %s\n", + voltdm->name, pwrdm->name); + + list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list); return 0; } /** - * omap_voltage_early_init()- Volatage driver early init + * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm + * @voltdm: struct voltagedomain * to iterate over + * @fn: callback function * + * + * Call the supplied function @fn for each powerdomain in the + * voltagedomain @voltdm. Returns -EINVAL if presented with invalid + * pointers; or passes along the last return value of the callback + * function, which should be 0 for success or anything else to + * indicate failure. + */ +int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, + int (*fn)(struct voltagedomain *voltdm, + struct powerdomain *pwrdm)) +{ + struct powerdomain *pwrdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node) + ret = (*fn)(voltdm, pwrdm); + + return ret; +} + +/** + * voltdm_for_each - call function on each registered voltagedomain + * @fn: callback function * + * + * Call the supplied function @fn for each registered voltagedomain. + * The callback function @fn can return anything but 0 to bail out + * early from the iterator. Returns the last return value of the + * callback function, which should be 0 for success or anything else + * to indicate failure; or -EINVAL if the function pointer is null. */ -static int __init omap_voltage_early_init(void) +int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), + void *user) { - if (cpu_is_omap34xx()) { - vdd_info = omap3_vdd_info; - nr_scalable_vdd = OMAP3_NR_SCALABLE_VDD; - vc_init = omap3_vc_init; - vdd_data_configure = omap3_vdd_data_configure; - } else if (cpu_is_omap44xx()) { - vdd_info = omap4_vdd_info; - nr_scalable_vdd = OMAP4_NR_SCALABLE_VDD; - vc_init = omap4_vc_init; - vdd_data_configure = omap4_vdd_data_configure; - } else { - pr_warning("%s: voltage driver support not added\n", __func__); + struct voltagedomain *temp_voltdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + ret = (*fn)(temp_voltdm, user); + if (ret) + break; } + return ret; +} + +static int _voltdm_register(struct voltagedomain *voltdm) +{ + if (!voltdm || !voltdm->name) + return -EINVAL; + + INIT_LIST_HEAD(&voltdm->pwrdm_list); + list_add(&voltdm->node, &voltdm_list); + + pr_debug("voltagedomain: registered %s\n", voltdm->name); + return 0; } -core_initcall(omap_voltage_early_init); + +/** + * voltdm_lookup - look up a voltagedomain by name, return a pointer + * @name: name of voltagedomain + * + * Find a registered voltagedomain by its name @name. Returns a pointer + * to the struct voltagedomain if found, or NULL otherwise. + */ +struct voltagedomain *voltdm_lookup(const char *name) +{ + struct voltagedomain *voltdm ; + + if (!name) + return NULL; + + voltdm = _voltdm_lookup(name); + + return voltdm; +} + +/** + * voltdm_init - set up the voltagedomain layer + * @voltdm_list: array of struct voltagedomain pointers to register + * + * Loop through the array of voltagedomains @voltdm_list, registering all + * that are available on the current CPU. If voltdm_list is supplied + * and not null, all of the referenced voltagedomains will be + * registered. No return value. + */ +void voltdm_init(struct voltagedomain **voltdms) +{ + struct voltagedomain **v; + + if (voltdms) { + for (v = voltdms; *v; v++) + _voltdm_register(*v); + } +} |