diff options
Diffstat (limited to 'arch/arm/mach-omap2/usb-host.c')
| -rw-r--r-- | arch/arm/mach-omap2/usb-host.c | 401 |
1 files changed, 169 insertions, 232 deletions
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 2e44e8a2288..745367c0c2b 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -22,8 +22,13 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dma-mapping.h> - -#include <asm/io.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/phy.h> +#include <linux/usb/usb_phy_generic.h> #include "soc.h" #include "omap_device.h" @@ -37,19 +42,6 @@ #define USBHS_UHH_HWMODNAME "usb_host_hs" #define USBHS_TLL_HWMODNAME "usb_tll_hs" -static struct usbhs_omap_platform_data usbhs_data; -static struct usbtll_omap_platform_data usbtll_data; -static struct ehci_hcd_omap_platform_data ehci_data; -static struct ohci_hcd_omap_platform_data ohci_data; - -static struct omap_device_pm_latency omap_uhhtll_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST @@ -197,125 +189,6 @@ static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) return; } -static -void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) -{ - switch (port_mode[0]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap_mux_init_signal("usbb1_ulpiphy_stp", - OMAP_PIN_OUTPUT); - omap_mux_init_signal("usbb1_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap_mux_init_signal("usbb1_ulpitll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("usbb1_ulpitll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } - switch (port_mode[1]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap_mux_init_signal("usbb2_ulpiphy_stp", - OMAP_PIN_OUTPUT); - omap_mux_init_signal("usbb2_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap_mux_init_signal("usbb2_ulpitll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("usbb2_ulpitll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } -} - static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { @@ -413,108 +286,19 @@ static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static -void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) -{ - switch (port_mode[0]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("usbb1_mm_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_mm_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("usbb1_mm_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("usbb1_mm_txen", - OMAP_PIN_INPUT_PULLDOWN); - - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("usbb1_mm_txdat", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_mm_txse0", - OMAP_PIN_INPUT_PULLDOWN); - break; - - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } - - switch (port_mode[1]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("usbb2_mm_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_mm_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("usbb2_mm_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("usbb2_mm_txen", - OMAP_PIN_INPUT_PULLDOWN); - - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("usbb2_mm_txdat", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_mm_txse0", - OMAP_PIN_INPUT_PULLDOWN); - break; - - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } -} - -void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +void __init usbhs_init(struct usbhs_omap_platform_data *pdata) { struct omap_hwmod *uhh_hwm, *tll_hwm; struct platform_device *pdev; int bus_id = -1; - int i; - - for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { - usbhs_data.port_mode[i] = pdata->port_mode[i]; - usbtll_data.port_mode[i] = pdata->port_mode[i]; - ohci_data.port_mode[i] = pdata->port_mode[i]; - ehci_data.port_mode[i] = pdata->port_mode[i]; - ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; - ehci_data.regulator[i] = pdata->regulator[i]; - } - ehci_data.phy_reset = pdata->phy_reset; - ohci_data.es2_compatibility = pdata->es2_compatibility; - usbhs_data.ehci_data = &ehci_data; - usbhs_data.ohci_data = &ohci_data; if (cpu_is_omap34xx()) { setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); if (omap_rev() <= OMAP3430_REV_ES2_1) - usbhs_data.single_ulpi_bypass = true; + pdata->single_ulpi_bypass = true; - } else if (cpu_is_omap44xx()) { - setup_4430ehci_io_mux(pdata->port_mode); - setup_4430ohci_io_mux(pdata->port_mode); } uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME); @@ -530,9 +314,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm, - &usbtll_data, sizeof(usbtll_data), - omap_uhhtll_latency, - ARRAY_SIZE(omap_uhhtll_latency), false); + pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("Could not build hwmod device %s\n", USBHS_TLL_HWMODNAME); @@ -540,9 +322,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm, - &usbhs_data, sizeof(usbhs_data), - omap_uhhtll_latency, - ARRAY_SIZE(omap_uhhtll_latency), false); + pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s\n", USBHS_UHH_HWMODNAME); @@ -552,8 +332,165 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) #else -void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +void __init usbhs_init(struct usbhs_omap_platform_data *pdata) { } #endif + +/* Template for PHY regulators */ +static struct fixed_voltage_config hsusb_reg_config = { + /* .supply_name filled later */ + .microvolts = 3300000, + .gpio = -1, /* updated later */ + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, /* updated later */ + .enabled_at_boot = 0, /* keep in RESET */ + /* .init_data filled later */ +}; + +static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */ +static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ + +/** + * usbhs_add_regulator - Add a gpio based fixed voltage regulator device + * @name: name for the regulator + * @dev_id: device id of the device this regulator supplies power to + * @dev_supply: supply name that the device expects + * @gpio: GPIO number + * @polarity: 1 - Active high, 0 - Active low + */ +static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, + int gpio, int polarity) +{ + struct regulator_consumer_supply *supplies; + struct regulator_init_data *reg_data; + struct fixed_voltage_config *config; + struct platform_device *pdev; + struct platform_device_info pdevinfo; + int ret = -ENOMEM; + + supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); + if (!supplies) + return -ENOMEM; + + supplies->supply = dev_supply; + supplies->dev_name = dev_id; + + reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); + if (!reg_data) + goto err_data; + + reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + reg_data->consumer_supplies = supplies; + reg_data->num_consumer_supplies = 1; + + config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), + GFP_KERNEL); + if (!config) + goto err_config; + + config->supply_name = kstrdup(name, GFP_KERNEL); + if (!config->supply_name) + goto err_supplyname; + + config->gpio = gpio; + config->enable_high = polarity; + config->init_data = reg_data; + + /* create a regulator device */ + memset(&pdevinfo, 0, sizeof(pdevinfo)); + pdevinfo.name = reg_name; + pdevinfo.id = PLATFORM_DEVID_AUTO; + pdevinfo.data = config; + pdevinfo.size_data = sizeof(*config); + + pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + pr_err("%s: Failed registering regulator %s for %s : %d\n", + __func__, name, dev_id, ret); + goto err_register; + } + + return 0; + +err_register: + kfree(config->supply_name); +err_supplyname: + kfree(config); +err_config: + kfree(reg_data); +err_data: + kfree(supplies); + return ret; +} + +#define MAX_STR 20 + +int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) +{ + char rail_name[MAX_STR]; + int i; + struct platform_device *pdev; + char *phy_id; + struct platform_device_info pdevinfo; + struct usb_phy_generic_platform_data nop_pdata; + + for (i = 0; i < num_phys; i++) { + + if (!phy->port) { + pr_err("%s: Invalid port 0. Must start from 1\n", + __func__); + continue; + } + + /* do we need a NOP PHY device ? */ + if (!gpio_is_valid(phy->reset_gpio) && + !gpio_is_valid(phy->vcc_gpio)) + continue; + + phy_id = kmalloc(MAX_STR, GFP_KERNEL); + if (!phy_id) { + pr_err("%s: kmalloc() failed\n", __func__); + return -ENOMEM; + } + + /* set platform data */ + memset(&nop_pdata, 0, sizeof(nop_pdata)); + if (gpio_is_valid(phy->vcc_gpio)) + nop_pdata.needs_vcc = true; + nop_pdata.gpio_reset = phy->reset_gpio; + nop_pdata.type = USB_PHY_TYPE_USB2; + + /* create a NOP PHY device */ + memset(&pdevinfo, 0, sizeof(pdevinfo)); + pdevinfo.name = nop_name; + pdevinfo.id = phy->port; + pdevinfo.data = &nop_pdata; + pdevinfo.size_data = + sizeof(struct usb_phy_generic_platform_data); + scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d", + phy->port); + pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(pdev)) { + pr_err("%s: Failed to register device %s : %ld\n", + __func__, phy_id, PTR_ERR(pdev)); + kfree(phy_id); + continue; + } + + usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); + + /* Do we need VCC regulator ? */ + if (gpio_is_valid(phy->vcc_gpio)) { + scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port); + usbhs_add_regulator(rail_name, phy_id, "vcc", + phy->vcc_gpio, phy->vcc_polarity); + } + + phy++; + } + + return 0; +} |