1 files changed, 13 insertions, 13 deletions

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index e83a6a4b184..745367c0c2b 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/phy.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
 
 #include "soc.h"
 #include "omap_device.h"
@@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = {
 	/* .init_data filled later */
 };
 
-static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */
+static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */
 static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
 
 /**
@@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 	struct platform_device *pdev;
 	char *phy_id;
 	struct platform_device_info pdevinfo;
+	struct usb_phy_generic_platform_data nop_pdata;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -455,14 +456,21 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 			return -ENOMEM;
 		}
 
+		/* set platform data */
+		memset(&nop_pdata, 0, sizeof(nop_pdata));
+		if (gpio_is_valid(phy->vcc_gpio))
+			nop_pdata.needs_vcc = true;
+		nop_pdata.gpio_reset = phy->reset_gpio;
+		nop_pdata.type = USB_PHY_TYPE_USB2;
+
 		/* create a NOP PHY device */
 		memset(&pdevinfo, 0, sizeof(pdevinfo));
 		pdevinfo.name = nop_name;
 		pdevinfo.id = phy->port;
-		pdevinfo.data = phy->platform_data;
+		pdevinfo.data = &nop_pdata;
 		pdevinfo.size_data =
-			sizeof(struct usb_phy_gen_xceiv_platform_data);
-		scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
+			sizeof(struct usb_phy_generic_platform_data);
+		scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d",
 					phy->port);
 		pdev = platform_device_register_full(&pdevinfo);
 		if (IS_ERR(pdev)) {
@@ -474,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 
 		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
 
-		/* Do we need RESET regulator ? */
-		if (gpio_is_valid(phy->reset_gpio)) {
-			scnprintf(rail_name, MAX_STR,
-					"hsusb%d_reset", phy->port);
-			usbhs_add_regulator(rail_name, phy_id, "reset",
-						phy->reset_gpio, 1);
-		}
-
 		/* Do we need VCC regulator ? */
 		if (gpio_is_valid(phy->vcc_gpio)) {
 			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);