diff options
Diffstat (limited to 'arch/arm/mach-omap2/usb-ehci.c')
| -rw-r--r-- | arch/arm/mach-omap2/usb-ehci.c | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c deleted file mode 100644 index f1df873d59d..00000000000 --- a/arch/arm/mach-omap2/usb-ehci.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/usb-ehci.c - * - * This file will contain the board specific details for the - * Synopsys EHCI host controller on OMAP3430 - * - * Copyright (C) 2007 Texas Instruments - * Author: Vikram Pandita <vikram.pandita@ti.com> - * - * Generalization by: - * Felipe Balbi <felipe.balbi@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <asm/io.h> -#include <plat/mux.h> - -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <plat/usb.h> - -#include "mux.h" - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) - -static struct resource ehci_resources[] = { - { - .start = OMAP34XX_EHCI_BASE, - .end = OMAP34XX_EHCI_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_UHH_CONFIG_BASE, - .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_USBTLL_BASE, - .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* general IRQ */ - .start = INT_34XX_EHCI_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 ehci_dmamask = ~(u32)0; -static struct platform_device ehci_device = { - .name = "ehci-omap", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = NULL, - }, - .num_resources = ARRAY_SIZE(ehci_resources), - .resource = ehci_resources, -}; - -/* MUX settings for EHCI pins */ -/* - * setup_ehci_io_mux - initialize IO pad mux for USBHOST - */ -static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) -{ - switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("hsusb1_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb1_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - /* FALLTHROUGH */ - default: - break; - } - - switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("hsusb2_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb2_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - /* FALLTHROUGH */ - default: - break; - } - - switch (port_mode[2]) { - case EHCI_HCD_OMAP_MODE_PHY: - printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("hsusb3_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb3_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - /* FALLTHROUGH */ - default: - break; - } - - return; -} - -void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) -{ - platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) - setup_ehci_io_mux(pdata->port_mode); - - if (platform_device_register(&ehci_device) < 0) { - printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); - return; - } -} - -#else - -void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) - -{ -} - -#endif /* CONFIG_USB_EHCI_HCD */ - |