aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/pm34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
-rw-r--r--arch/arm/mach-omap2/pm34xx.c154
1 files changed, 63 insertions, 91 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 3a595e89972..507d8eeaab9 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,28 +28,29 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/omap-dma.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <trace/events/power.h>
+#include <asm/fncpy.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
-#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
-#include <plat/sdrc.h>
-#include <plat/prcm.h>
-#include <plat/gpmc.h>
-#include <plat/dma.h>
-
+#include "soc.h"
#include "common.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "gpmc.h"
#include "prm-regbits-34xx.h"
-
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
#include "pm.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
+#include "vc.h"
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
@@ -70,34 +71,6 @@ void (*omap3_do_wfi_sram)(void);
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
-static struct powerdomain *cam_pwrdm;
-
-static void omap3_enable_io_chain(void)
-{
- int timeout = 0;
-
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
- /* Do a readback to assure write has been done */
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
- while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
- OMAP3430_ST_IO_CHAIN_MASK)) {
- timeout++;
- if (timeout > 1000) {
- pr_err("Wake up daisy chain activation failed.\n");
- return;
- }
- omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
- WKUP_MOD, PM_WKEN);
- }
-}
-
-static void omap3_disable_io_chain(void)
-{
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
-}
static void omap3_core_save_context(void)
{
@@ -148,7 +121,7 @@ static void omap3_save_secure_ram_context(void)
* will hang the system.
*/
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
- ret = _omap_save_secure_sram((u32 *)
+ ret = _omap_save_secure_sram((u32 *)(unsigned long)
__pa(omap3_secure_ram_storage));
pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
@@ -299,15 +272,8 @@ void omap_sram_idle(void)
/* Enable IO-PAD and IO-CHAIN wakeups */
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
- if (omap3_has_io_wakeup() &&
- (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)) {
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
- if (omap3_has_io_chain_ctrl())
- omap3_enable_io_chain();
- }
- pwrdm_pre_transition();
+ pwrdm_pre_transition(NULL);
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
@@ -323,6 +289,9 @@ void omap_sram_idle(void)
}
}
+ /* Configure PMIC signaling for I2C4 or sys_off_mode */
+ omap3_vc_set_pmic_signaling(core_next_state);
+
omap3_intc_prepare_idle();
/*
@@ -365,49 +334,26 @@ void omap_sram_idle(void)
omap3_sram_restore_context();
omap2_sms_restore_context();
}
- if (core_next_state == PWRDM_POWER_OFF)
- omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
- OMAP3430_GR_MOD,
- OMAP3_PRM_VOLTCTRL_OFFSET);
}
omap3_intc_resume_idle();
- pwrdm_post_transition();
+ pwrdm_post_transition(NULL);
/* PER */
if (per_next_state < PWRDM_POWER_ON)
omap2_gpio_resume_after_idle();
-
- /* Disable IO-PAD and IO-CHAIN wakeup */
- if (omap3_has_io_wakeup() &&
- (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)) {
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
- PM_WKEN);
- if (omap3_has_io_chain_ctrl())
- omap3_disable_io_chain();
- }
-
- clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
static void omap3_pm_idle(void)
{
- local_fiq_disable();
-
if (omap_irq_pending())
- goto out;
+ return;
- trace_power_start(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle(1, smp_processor_id());
omap_sram_idle();
- trace_power_end(smp_processor_id());
trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
-
-out:
- local_fiq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -436,9 +382,8 @@ restore:
list_for_each_entry(pwrst, &pwrst_list, node) {
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
- pr_info("Powerdomain (%s) didn't enter "
- "target state %d\n",
- pwrst->pwrdm->name, pwrst->next_state);
+ pr_info("Powerdomain (%s) didn't enter target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
@@ -450,7 +395,8 @@ restore:
return ret;
}
-
+#else
+#define omap3_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
@@ -485,8 +431,7 @@ static void __init omap3_iva_idle(void)
OMAP3430_IVA2_MOD, CM_FCLKEN);
/* Set IVA2 boot mode to 'idle' */
- omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
- OMAP343X_CONTROL_IVA2_BOOTMOD);
+ omap3_ctrl_set_iva_bootmode_idle();
/* Un-reset IVA2 */
omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
@@ -581,10 +526,13 @@ static void __init prcm_setup_regs(void)
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
- omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+ if (omap3_has_iva()) {
+ omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
+ OMAP3430_PM_IVAGRPSEL);
+ }
/* Clear any pending 'reset' flags */
omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
@@ -598,7 +546,11 @@ static void __init prcm_setup_regs(void)
/* Clear any pending PRCM interrupts */
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ /*
+ * We need to idle iva2_pwrdm even on am3703 with no iva2.
+ */
omap3_iva_idle();
+
omap3_d2d_idle();
}
@@ -693,14 +645,17 @@ static void __init pm_errata_configure(void)
/* Enable the l2 cache toggling in sleep logic */
enable_omap3630_toggle_l2_on_restore();
if (omap_rev() < OMAP3630_REV_ES1_2)
- pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+ PM_PER_MEMORIES_ERRATUM_i582);
+ } else if (cpu_is_omap34xx()) {
+ pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
}
}
int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *mpu_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
int ret;
if (!omap3_has_io_chain_ctrl())
@@ -749,14 +704,13 @@ int __init omap3_pm_init(void)
neon_pwrdm = pwrdm_lookup("neon_pwrdm");
per_pwrdm = pwrdm_lookup("per_pwrdm");
core_pwrdm = pwrdm_lookup("core_pwrdm");
- cam_pwrdm = pwrdm_lookup("cam_pwrdm");
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ per_clkdm = clkdm_lookup("per_clkdm");
+ wkup_clkdm = clkdm_lookup("wkup_clkdm");
-#ifdef CONFIG_SUSPEND
- omap_pm_suspend = omap3_pm_suspend;
-#endif
+ omap_common_suspend_init(omap3_pm_suspend);
arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
@@ -769,23 +723,41 @@ int __init omap3_pm_init(void)
if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
omap3630_ctrl_disable_rta();
+ /*
+ * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+ * not correctly reset when the PER powerdomain comes back
+ * from OFF or OSWR when the CORE powerdomain is kept active.
+ * See OMAP36xx Erratum i582 "PER Domain reset issue after
+ * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a
+ * complete workaround. The kernel must also prevent the PER
+ * powerdomain from going to OSWR/OFF while the CORE
+ * powerdomain is not going to OSWR/OFF. And if PER last
+ * power state was off while CORE last power state was ON, the
+ * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+ * self-test using their loopback tests; if that fails, those
+ * devices are unusable until the PER/CORE can complete a transition
+ * from ON to OSWR/OFF and then back to ON.
+ *
+ * XXX Technically this workaround is only needed if off-mode
+ * or OSWR is enabled.
+ */
+ if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+ clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
kmalloc(0x803F, GFP_KERNEL);
if (!omap3_secure_ram_storage)
- pr_err("Memory allocation failed when "
- "allocating for secure sram context\n");
+ pr_err("Memory allocation failed when allocating for secure sram context\n");
local_irq_disable();
- local_fiq_disable();
omap_dma_global_context_save();
omap3_save_secure_ram_context();
omap_dma_global_context_restore();
local_irq_enable();
- local_fiq_enable();
}
omap3_save_scratchpad_contents();
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-10 13:18:40 +0000