diff options
Diffstat (limited to 'arch/arm/mach-omap2/mux.h')
| -rw-r--r-- | arch/arm/mach-omap2/mux.h | 59 |
1 files changed, 38 insertions, 21 deletions
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index a4ab17a737a..d121fb6df4e 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -7,10 +7,7 @@ * published by the Free Software Foundation. */ -#include "mux2420.h" -#include "mux2430.h" #include "mux34xx.h" -#include "mux44xx.h" #define OMAP_MUX_TERMINATOR 0xffff @@ -29,7 +26,7 @@ #define OMAP_PULL_UP (1 << 4) #define OMAP_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ +/* omap3/4/5 specific mux bit defines */ #define OMAP_INPUT_EN (1 << 8) #define OMAP_OFF_EN (1 << 9) #define OMAP_OFFOUT_EN (1 << 10) @@ -37,8 +34,6 @@ #define OMAP_OFF_PULL_EN (1 << 12) #define OMAP_OFF_PULL_UP (1 << 13) #define OMAP_WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ #define OMAP_WAKEUP_EVENT (1 << 15) /* Active pin states */ @@ -58,19 +53,16 @@ #define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN -#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \ + partition->gpio) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff -#define OMAP_PACKAGE_CBS 8 /* 547-pin 0.40 0.40 */ -#define OMAP_PACKAGE_CBL 7 /* 547-pin 0.40 0.40 */ #define OMAP_PACKAGE_CBP 6 /* 515-pin 0.40 0.50 */ #define OMAP_PACKAGE_CUS 5 /* 423-pin 0.65 */ #define OMAP_PACKAGE_CBB 4 /* 515-pin 0.40 0.50 */ #define OMAP_PACKAGE_CBC 3 /* 515-pin 0.50 0.65 */ -#define OMAP_PACKAGE_ZAC 2 /* 24xx 447-pin POP */ -#define OMAP_PACKAGE_ZAF 1 /* 2420 447-pin SIP */ - #define OMAP_MUX_NR_MODES 8 /* Available modes */ #define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ @@ -78,13 +70,20 @@ /* * omap_mux_init flags definition: * + * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control + * register which includes values from 0-7. * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits. * The default value is 16 bits. - * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3. - * The default is mode4. */ -#define OMAP_MUX_REG_8BIT (1 << 0) -#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1) +#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0 +#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1 +#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2 +#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3 +#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4 +#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5 +#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6 +#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7 +#define OMAP_MUX_REG_8BIT (1 << 3) /** * struct omap_board_data - board specific device data @@ -104,6 +103,7 @@ struct omap_board_data { * struct mux_partition - contain partition related information * @name: name of the current partition * @flags: flags specific to this partition + * @gpio: gpio mux mode * @phys: physical address * @size: partition size * @base: virtual address after ioremap @@ -113,6 +113,7 @@ struct omap_board_data { struct omap_mux_partition { const char *name; u32 flags; + u32 gpio; u32 phys; u32 size; void __iomem *base; @@ -126,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; @@ -159,7 +159,6 @@ struct omap_board_mux { u16 value; }; -#define OMAP_DEVICE_PAD_ENABLED BIT(7) /* Not needed for board-*.c */ #define OMAP_DEVICE_PAD_REMUX BIT(1) /* Dynamically remux a pad, needs enable, idle and off values */ @@ -187,6 +186,12 @@ struct omap_device_pad { struct omap_hwmod_mux_info; +#define OMAP_MUX_STATIC(signal, mode) \ +{ \ + .name = (signal), \ + .enable = (mode), \ +} + #if defined(CONFIG_OMAP_MUX) /** @@ -220,8 +225,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; @@ -241,7 +256,7 @@ static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) { } -static struct omap_board_mux *board_mux __initdata __maybe_unused; +static struct omap_board_mux *board_mux __maybe_unused; #endif @@ -318,10 +333,12 @@ int omap3_mux_init(struct omap_board_mux *board_mux, int flags); /** * omap4_mux_init() - initialize mux system with board specific set - * @board_mux: Board specific mux table + * @board_subset: Board specific mux table + * @board_wkup_subset: Board specific mux table for wakeup instance * @flags: OMAP package type used for the board */ -int omap4_mux_init(struct omap_board_mux *board_mux, int flags); +int omap4_mux_init(struct omap_board_mux *board_subset, + struct omap_board_mux *board_wkup_subset, int flags); /** * omap_mux_init - private mux init function, do not call |