diff options
Diffstat (limited to 'arch/arm/mach-omap2/gpmc-smc91x.c')
| -rw-r--r-- | arch/arm/mach-omap2/gpmc-smc91x.c | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c new file mode 100644 index 00000000000..61a063595e6 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -0,0 +1,186 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-smc91x.c + * + * Copyright (C) 2009 Nokia Corporation + * Contact: Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/smc91x.h> + +#include "gpmc.h" +#include "gpmc-smc91x.h" + +#include "soc.h" + +static struct omap_smc91x_platform_data *gpmc_cfg; + +static struct resource gpmc_smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smc91x_platdata gpmc_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct platform_device gpmc_smc91x_device = { + .name = "smc91x", + .id = -1, + .dev = { + .platform_data = &gpmc_smc91x_info, + }, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, +}; + +static struct gpmc_settings smc91x_settings = { + .device_width = GPMC_DEVWIDTH_16BIT, +}; + +/* + * Set the gpmc timings for smc91c96. The timings are taken + * from the data sheet available at: + * http://www.smsc.com/main/catalog/lan91c96.html + * REVISIT: Level shifters can add at least to the access latency. + */ +static int smc91c96_gpmc_retime(void) +{ + struct gpmc_timings t; + struct gpmc_device_timings dev_t; + const int t3 = 10; /* Figure 12.2 read and 12.4 write */ + const int t4_r = 20; /* Figure 12.2 read */ + const int t4_w = 5; /* Figure 12.4 write */ + const int t5 = 25; /* Figure 12.2 read */ + const int t6 = 15; /* Figure 12.2 read */ + const int t7 = 5; /* Figure 12.4 write */ + const int t8 = 5; /* Figure 12.4 write */ + const int t20 = 185; /* Figure 12.2 read and 12.4 write */ + + /* + * FIXME: Calculate the address and data bus muxed timings. + * Note that at least adv_rd_off needs to be changed according + * to omap3430 TRM Figure 11-11. Are the sdp boards using the + * FPGA in between smc91x and omap as the timings are different + * from above? + */ + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + return 0; + + memset(&dev_t, 0, sizeof(dev_t)); + + dev_t.t_oeasu = t3 * 1000; + dev_t.t_oe = t5 * 1000; + dev_t.t_cez_r = t4_r * 1000; + dev_t.t_oez = t6 * 1000; + dev_t.t_rd_cycle = (t20 - t3) * 1000; + + dev_t.t_weasu = t3 * 1000; + dev_t.t_wpl = t7 * 1000; + dev_t.t_wph = t8 * 1000; + dev_t.t_cez_w = t4_w * 1000; + dev_t.t_wr_cycle = (t20 - t3) * 1000; + + gpmc_calc_timings(&t, &smc91x_settings, &dev_t); + + return gpmc_cs_set_timings(gpmc_cfg->cs, &t); +} + +/* + * Initialize smc91x device connected to the GPMC. Note that we + * assume that pin multiplexing is done in the board-*.c file, + * or in the bootloader. + */ +void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) +{ + unsigned long cs_mem_base; + int ret; + + gpmc_cfg = board_data; + + if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) + gpmc_cfg->retime = smc91c96_gpmc_retime; + + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; + gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; + gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + smc91x_settings.mux_add_data = GPMC_MUX_AD; + if (gpmc_cfg->flags & GPMC_READ_MON) + smc91x_settings.wait_on_read = true; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + smc91x_settings.wait_on_write = true; + if (gpmc_cfg->wait_pin) + smc91x_settings.wait_pin = gpmc_cfg->wait_pin; + ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); + if (ret < 0) + goto free1; + + if (gpmc_cfg->retime) { + ret = gpmc_cfg->retime(); + if (ret != 0) + goto free1; + } + + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) + goto free1; + + gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); + + if (gpmc_cfg->gpio_pwrdwn) { + ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, + GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); + if (ret) + goto free2; + } + + if (gpmc_cfg->gpio_reset) { + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_LOW, "SMC91X reset"); + if (ret) + goto free3; + + gpio_set_value(gpmc_cfg->gpio_reset, 1); + msleep(100); + gpio_set_value(gpmc_cfg->gpio_reset, 0); + } + + if (platform_device_register(&gpmc_smc91x_device) < 0) { + printk(KERN_ERR "Unable to register smc91x device\n"); + gpio_free(gpmc_cfg->gpio_reset); + goto free3; + } + + return; + +free3: + if (gpmc_cfg->gpio_pwrdwn) + gpio_free(gpmc_cfg->gpio_pwrdwn); +free2: + gpio_free(gpmc_cfg->gpio_irq); +free1: + gpmc_cs_free(gpmc_cfg->cs); + + printk(KERN_ERR "Could not initialize smc91x\n"); +} |