diff options
Diffstat (limited to 'arch/arm/mach-omap2/control.c')
| -rw-r--r-- | arch/arm/mach-omap2/control.c | 75 |
1 files changed, 26 insertions, 49 deletions
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 2adb2683f07..751f3549bf6 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -46,17 +46,7 @@ struct omap3_scratchpad { struct omap3_scratchpad_prcm_block { u32 prm_clksrc_ctrl; u32 prm_clksel; - u32 cm_clksel_core; - u32 cm_clksel_wkup; - u32 cm_clken_pll; - u32 cm_autoidle_pll; - u32 cm_clksel1_pll; - u32 cm_clksel2_pll; - u32 cm_clksel3_pll; - u32 cm_clken_pll_mpu; - u32 cm_autoidle_pll_mpu; - u32 cm_clksel1_pll_mpu; - u32 cm_clksel2_pll_mpu; + u32 cm_contents[11]; u32 prcm_block_size; }; @@ -161,32 +151,32 @@ void __iomem *omap_ctrl_base_get(void) u8 omap_ctrl_readb(u16 offset) { - return __raw_readb(OMAP_CTRL_REGADDR(offset)); + return readb_relaxed(OMAP_CTRL_REGADDR(offset)); } u16 omap_ctrl_readw(u16 offset) { - return __raw_readw(OMAP_CTRL_REGADDR(offset)); + return readw_relaxed(OMAP_CTRL_REGADDR(offset)); } u32 omap_ctrl_readl(u16 offset) { - return __raw_readl(OMAP_CTRL_REGADDR(offset)); + return readl_relaxed(OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writeb(u8 val, u16 offset) { - __raw_writeb(val, OMAP_CTRL_REGADDR(offset)); + writeb_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writew(u16 val, u16 offset) { - __raw_writew(val, OMAP_CTRL_REGADDR(offset)); + writew_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP_CTRL_REGADDR(offset)); + writel_relaxed(val, OMAP_CTRL_REGADDR(offset)); } /* @@ -198,12 +188,12 @@ void omap_ctrl_writel(u32 val, u16 offset) u32 omap4_ctrl_pad_readl(u16 offset) { - return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset)); + return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); } void omap4_ctrl_pad_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset)); + writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); } #ifdef CONFIG_ARCH_OMAP3 @@ -232,7 +222,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) * * XXX This should use some omap_ctrl_writel()-type function */ - __raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); + writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); } #endif @@ -249,6 +239,7 @@ void omap_ctrl_write_dsp_boot_addr(u32 bootaddr) u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR : cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR : cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : + soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : 0; if (!offset) { @@ -294,7 +285,7 @@ void omap3_clear_scratchpad_contents(void) if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & OMAP3430_GLOBAL_COLD_RST_MASK) { for ( ; offset <= max_offset; offset += 0x4) - __raw_writel(0x0, (v_addr + offset)); + writel_relaxed(0x0, (v_addr + offset)); omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET); @@ -346,34 +337,9 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.prm_clksel = omap2_prm_read_mod_reg(OMAP3430_CCR_MOD, OMAP3_PRM_CLKSEL_OFFSET); - prcm_block_contents.cm_clksel_core = - omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL); - prcm_block_contents.cm_clksel_wkup = - omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); - prcm_block_contents.cm_clken_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - /* - * As per erratum i671, ROM code does not respect the PER DPLL - * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. - * Then, in anycase, clear these bits to avoid extra latencies. - */ - prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & - ~OMAP3430_AUTO_PERIPH_DPLL_MASK; - prcm_block_contents.cm_clksel1_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); - prcm_block_contents.cm_clksel3_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); - prcm_block_contents.cm_clken_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); - prcm_block_contents.cm_autoidle_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); - prcm_block_contents.cm_clksel1_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); + + omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents); + prcm_block_contents.prcm_block_size = 0x0; /* Populate the SDRC block contents */ @@ -603,4 +569,15 @@ int omap3_ctrl_save_padconf(void) return 0; } +/** + * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle + * + * Sets the bootmode for IVA2 to idle. This is needed by the PM code to + * force disable IVA2 so that it does not prevent any low-power states. + */ +void omap3_ctrl_set_iva_bootmode_idle(void) +{ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); +} #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ |