1 files changed, 17 insertions, 54 deletions

diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index bcb0c581716..d246efd9f73 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -24,16 +24,15 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <plat/mcspi.h>
-#include <plat/nand.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
+#include "common.h"
 #include "common-board-devices.h"
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
 };
 
 static struct ads7846_platform_data ads7846_config = {
@@ -64,25 +63,35 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
 	if (board_pdata && board_pdata->get_pendown_state) {
 		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
 		if (err) {
 			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
 			return;
 		}
-		gpio_export(gpio_pendown, 0);
 
 		if (gpio_debounce)
 			gpio_set_debounce(gpio_pendown, gpio_debounce);
-	}
 
-	ads7846_config.gpio_pendown = gpio_pendown;
+		gpio_export(gpio_pendown, 0);
+	}
 
 	spi_bi->bus_num	= bus_num;
-	spi_bi->irq	= OMAP_GPIO_IRQ(gpio_pendown);
+	spi_bi->irq	= gpio_to_irq(gpio_pendown);
+
+	ads7846_config.gpio_pendown = gpio_pendown;
 
-	if (board_pdata)
+	if (board_pdata) {
+		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
+	}
 
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
@@ -92,49 +101,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 {
 }
 #endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-	u8 cs = 0;
-	u8 nandcs = GPMC_CS_NUM + 1;
-
-	/* find out the chip-select on which NAND exists */
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		if ((ret & 0xC00) == 0x800) {
-			printk(KERN_INFO "Found NAND on CS%d\n", cs);
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-		}
-		cs++;
-	}
-
-	if (nandcs > GPMC_CS_NUM) {
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				 "in GPMC\n ");
-		return;
-	}
-
-	if (nandcs < GPMC_CS_NUM) {
-		nand_data.cs = nandcs;
-		nand_data.parts = parts;
-		nand_data.nr_parts = nr_parts;
-		nand_data.devsize = options;
-
-		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (gpmc_nand_init(&nand_data) < 0)
-			printk(KERN_ERR "Unable to register NAND device\n");
-	}
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-}
-#endif