diff options
Diffstat (limited to 'arch/arm/mach-omap2/cm.h')
| -rw-r--r-- | arch/arm/mach-omap2/cm.h | 172 |
1 files changed, 40 insertions, 132 deletions
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a02ca30423d..93473f9a551 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -1,10 +1,7 @@ -#ifndef __ARCH_ASM_MACH_OMAP2_CM_H -#define __ARCH_ASM_MACH_OMAP2_CM_H - /* - * OMAP2/3 Clock Management (CM) register definitions + * OMAP2+ Clock Management prototypes * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley @@ -13,144 +10,55 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#include "prcm-common.h" - -#define OMAP2420_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) -#define OMAP2430_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) -#define OMAP34XX_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) -#define OMAP44XX_CM1_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) + (reg)) -#define OMAP44XX_CM2_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) + (reg)) - -#include "cm44xx.h" +#ifndef __ARCH_ASM_MACH_OMAP2_CM_H +#define __ARCH_ASM_MACH_OMAP2_CM_H /* - * Architecture-specific global CM registers - * Use cm_{read,write}_reg() with these registers. - * These registers appear once per CM module. + * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the + * PRCM to request that a module exit the inactive state in the case of + * OMAP2 & 3. + * In the case of OMAP4 this is the max duration in microseconds for the + * module to reach the functionnal state from an inactive state. */ +#define MAX_MODULE_READY_TIME 2000 -#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) - -#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 -#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) +# ifndef __ASSEMBLER__ +extern void __iomem *cm_base; +extern void __iomem *cm2_base; +extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); +# endif /* - * Module specific CM registers from CM_BASE + domain offset - * Use cm_{read,write}_mod_reg() with these registers. - * These register offsets generally appear in more than one PRCM submodule. + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. */ +#define MAX_MODULE_DISABLE_TIME 5000 -/* Common between 24xx and 34xx */ - -#define CM_FCLKEN 0x0000 -#define CM_FCLKEN1 CM_FCLKEN -#define CM_CLKEN CM_FCLKEN -#define CM_ICLKEN 0x0010 -#define CM_ICLKEN1 CM_ICLKEN -#define CM_ICLKEN2 0x0014 -#define CM_ICLKEN3 0x0018 -#define CM_IDLEST 0x0020 -#define CM_IDLEST1 CM_IDLEST -#define CM_IDLEST2 0x0024 -#define CM_AUTOIDLE 0x0030 -#define CM_AUTOIDLE1 CM_AUTOIDLE -#define CM_AUTOIDLE2 0x0034 -#define CM_AUTOIDLE3 0x0038 -#define CM_CLKSEL 0x0040 -#define CM_CLKSEL1 CM_CLKSEL -#define CM_CLKSEL2 0x0044 -#define OMAP2_CM_CLKSTCTRL 0x0048 -#define OMAP4_CM_CLKSTCTRL 0x0000 - - -/* Architecture-specific registers */ - -#define OMAP24XX_CM_FCLKEN2 0x0004 -#define OMAP24XX_CM_ICLKEN4 0x001c -#define OMAP24XX_CM_AUTOIDLE4 0x003c - -#define OMAP2430_CM_IDLEST3 0x0028 - -#define OMAP3430_CM_CLKEN_PLL 0x0004 -#define OMAP3430ES2_CM_CLKEN2 0x0004 -#define OMAP3430ES2_CM_FCLKEN3 0x0008 -#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2 -#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2 -#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2 -#define OMAP3430_CM_CLKSEL1 CM_CLKSEL -#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL -#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2 -#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2 -#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL -#define OMAP3430_CM_CLKSTST 0x004c -#define OMAP3430ES2_CM_CLKSEL4 0x004c -#define OMAP3430ES2_CM_CLKSEL5 0x0050 -#define OMAP3430_CM_CLKSEL2_EMU 0x0050 -#define OMAP3430_CM_CLKSEL3_EMU 0x0054 - -/* CM2.CEFUSE_CM2 register offsets */ +# ifndef __ASSEMBLER__ -/* OMAP4 modulemode control */ -#define OMAP4430_MODULEMODE_HWCTRL 0 -#define OMAP4430_MODULEMODE_SWCTRL 1 - -/* Clock management domain register get/set */ - -#ifndef __ASSEMBLER__ - -extern u32 cm_read_mod_reg(s16 module, u16 idx); -extern void cm_write_mod_reg(u32 val, s16 module, u16 idx); -extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); - -extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, - u8 idlest_shift); -extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg); - -static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return cm_rmw_mod_reg_bits(bits, bits, module, idx); -} - -static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return cm_rmw_mod_reg_bits(bits, 0x0, module, idx); -} - -#endif - -/* CM register bits shared between 24XX and 3430 */ - -/* CM_CLKSEL_GFX */ -#define OMAP_CLKSEL_GFX_SHIFT 0 -#define OMAP_CLKSEL_GFX_MASK (0x7 << 0) - -/* CM_ICLKEN_GFX */ -#define OMAP_EN_GFX_SHIFT 0 -#define OMAP_EN_GFX_MASK (1 << 0) - -/* CM_IDLEST_GFX */ -#define OMAP_ST_GFX_MASK (1 << 0) +/** + * struct cm_ll_data - fn ptrs to per-SoC CM function implementations + * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl + * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl + */ +struct cm_ll_data { + int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); + int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); +}; +extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); +extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); -/* CM_IDLEST indicator */ -#define OMAP24XX_CM_IDLEST_VAL 0 -#define OMAP34XX_CM_IDLEST_VAL 1 +extern int cm_register(struct cm_ll_data *cld); +extern int cm_unregister(struct cm_ll_data *cld); -/* - * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the - * PRCM to request that a module exit the inactive state in the case of - * OMAP2 & 3. - * In the case of OMAP4 this is the max duration in microseconds for the - * module to reach the functionnal state from an inactive state. - */ -#define MAX_MODULE_READY_TIME 2000 +# endif #endif |