diff options
Diffstat (limited to 'arch/arm/mach-omap2/clock.h')
| -rw-r--r-- | arch/arm/mach-omap2/clock.h | 194 |
1 files changed, 8 insertions, 186 deletions
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 7aa32cd292f..12f54d428d7 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -21,6 +21,7 @@ #include <linux/clkdev.h> #include <linux/clk-provider.h> +#include <linux/clk/ti.h> struct omap_clk { u16 cpu; @@ -37,7 +38,6 @@ struct omap_clk { } struct clockdomain; -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ static struct clk _name = { \ @@ -178,152 +178,6 @@ struct clksel { const struct clksel_rate *rates; }; -/** - * struct dpll_data - DPLL registers and integration data - * @mult_div1_reg: register containing the DPLL M and N bitfields - * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg - * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg - * @clk_bypass: struct clk pointer to the clock's bypass clock input - * @clk_ref: struct clk pointer to the clock's reference clock input - * @control_reg: register containing the DPLL mode bitfield - * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() - * @last_rounded_m4xen: cache of the last M4X result of - * omap4_dpll_regm4xen_round_rate() - * @last_rounded_lpmode: cache of the last lpmode result of - * omap4_dpll_lpmode_recalc() - * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() - * @min_divider: minimum valid non-bypass divider value (actual) - * @max_divider: maximum valid non-bypass divider value (actual) - * @modes: possible values of @enable_mask - * @autoidle_reg: register containing the DPLL autoidle mode bitfield - * @idlest_reg: register containing the DPLL idle status bitfield - * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg - * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg - * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg - * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg - * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg - * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg - * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs - * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs - * @flags: DPLL type/features (see below) - * - * Possible values for @flags: - * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) - * - * @freqsel_mask is only used on the OMAP34xx family and AM35xx. - * - * XXX Some DPLLs have multiple bypass inputs, so it's not technically - * correct to only have one @clk_bypass pointer. - * - * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, - * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a different structure, so that the runtime-fixed data - * can be placed into read-only space. - */ -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u8 last_rounded_m4xen; - u8 last_rounded_lpmode; - u16 max_multiplier; - u8 last_rounded_n; - u8 min_divider; - u16 max_divider; - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u32 dco_mask; - u32 sddiv_mask; - u32 lpmode_mask; - u32 m4xen_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - u8 flags; -}; - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk_hw_omap - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @flags: see "struct clk.flags possibilities" above - * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock - * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock - * @clkdm_name: clockdomain name that this clock is contained in - * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - */ - -struct clk_hw_omap_ops; - -struct clk_hw_omap { - struct clk_hw hw; - struct list_head node; - unsigned long fixed_rate; - u8 fixed_div; - void __iomem *enable_reg; - u8 enable_bit; - u8 flags; - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; - const struct clk_hw_omap_ops *ops; -}; - -struct clk_hw_omap_ops { - void (*find_idlest)(struct clk_hw_omap *oclk, - void __iomem **idlest_reg, - u8 *idlest_bit, u8 *idlest_val); - void (*find_companion)(struct clk_hw_omap *oclk, - void __iomem **other_reg, - u8 *other_bit); - void (*allow_idle)(struct clk_hw_omap *oclk); - void (*deny_idle)(struct clk_hw_omap *oclk); -}; - unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, unsigned long parent_rate); @@ -348,36 +202,13 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, #define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP4XXX_EN_DPLL_LOCKED 0x7 -/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ -#define DPLL_LOW_POWER_STOP 0x1 -#define DPLL_LOW_POWER_BYPASS 0x5 -#define DPLL_LOCKED 0x7 - -/* DPLL Type and DCO Selection Flags */ -#define DPLL_J_TYPE 0x1 - -long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate); -unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); -int omap3_noncore_dpll_enable(struct clk_hw *hw); -void omap3_noncore_dpll_disable(struct clk_hw *hw); -int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate); u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); void omap3_dpll_allow_idle(struct clk_hw_omap *clk); void omap3_dpll_deny_idle(struct clk_hw_omap *clk); -unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, - unsigned long parent_rate); int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk); void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); -unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, - unsigned long parent_rate); -long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, - unsigned long target_rate, - unsigned long *parent_rate); -void omap2_init_clk_clkdm(struct clk_hw *clk); void __init omap2_clk_disable_clkdm_control(void); /* clkt_clksel.c public functions */ @@ -396,27 +227,25 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val); extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk); extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); -u8 omap2_init_dpll_parent(struct clk_hw *hw); unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); -int omap2_dflt_clk_enable(struct clk_hw *hw); -void omap2_dflt_clk_disable(struct clk_hw *hw); -int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, void __iomem **other_reg, u8 *other_bit); void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val); -void omap2_init_clk_hw_omap_clocks(struct clk *clk); int omap2_clk_enable_autoidle_all(void); -int omap2_clk_disable_autoidle_all(void); -void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); +int omap2_clk_allow_idle(struct clk *clk); +int omap2_clk_deny_idle(struct clk *clk); int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name); void omap2_clk_print_new_rates(const char *hfclkin_ck_name, const char *core_ck_name, const char *mpu_ck_name); +u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg); +void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg); + extern u16 cpu_mask; extern const struct clkops clkops_omap2_dflt_wait; @@ -431,23 +260,14 @@ extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; extern struct clk dummy_ck; -extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_iclk_wait; extern const struct clk_hw_omap_ops clkhwops_wait; -extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; -extern const struct clk_hw_omap_ops clkhwops_iclk; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; -extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; -extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ extern const struct clksel_rate div_1_0_rates[]; @@ -458,6 +278,8 @@ extern const struct clksel_rate div_1_3_rates[]; extern const struct clksel_rate div_1_4_rates[]; extern const struct clksel_rate div31_1to31_rates[]; +extern void __iomem *clk_memmaps[]; + extern int am33xx_clk_init(void); extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); |