diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-rx51-peripherals.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 303 |
1 files changed, 237 insertions, 66 deletions
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index acb4e77b39e..ddfc8df83c6 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -25,28 +25,40 @@ #include <linux/gpio_keys.h> #include <linux/mmc/host.h> #include <linux/power/isp1704_charger.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/mtd-onenand-omap2.h> + +#include <asm/system_info.h> -#include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/onenand.h> -#include <plat/gpmc-smc91x.h> +#include <linux/omap-dma.h> +#include "gpmc-smc91x.h" -#include <mach/board-rx51.h> +#include "board-rx51.h" #include <sound/tlv320aic3x.h> #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> -#include <linux/leds-lp5523.h> +#include <linux/platform_data/leds-lp55xx.h> + +#include <linux/platform_data/tsl2563.h> +#include <linux/lis3lv02d.h> + +#include <video/omap-panel-data.h> -#include <../drivers/staging/iio/light/tsl2563.h> +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +#include <media/ir-rx51.h> +#endif #include "mux.h" +#include "omap-pm.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-onenand.h" +#include "soc.h" +#include "omap-secure.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 @@ -62,16 +74,89 @@ #define RX51_TSC2005_RESET_GPIO 104 #define RX51_TSC2005_IRQ_GPIO 100 -/* list all spi devices here */ +#define LIS302_IRQ1_GPIO 181 +#define LIS302_IRQ2_GPIO 180 /* Not yet in use */ + +/* List all SPI devices here. Note that the list/probe order seems to matter! */ enum { RX51_SPI_WL1251, - RX51_SPI_MIPID, /* LCD panel */ RX51_SPI_TSC2005, /* Touch Controller */ + RX51_SPI_MIPID, /* LCD panel */ }; -static struct wl12xx_platform_data wl1251_pdata; +static struct wl1251_platform_data wl1251_pdata; static struct tsc2005_platform_data tsc2005_pdata; +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) +static int lis302_setup(void) +{ + int err; + int irq1 = LIS302_IRQ1_GPIO; + int irq2 = LIS302_IRQ2_GPIO; + + /* gpio for interrupt pin 1 */ + err = gpio_request(irq1, "lis3lv02dl_irq1"); + if (err) { + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + /* gpio for interrupt pin 2 */ + err = gpio_request(irq2, "lis3lv02dl_irq2"); + if (err) { + gpio_free(irq1); + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + gpio_direction_input(irq1); + gpio_direction_input(irq2); + +out: + return err; +} + +static int lis302_release(void) +{ + gpio_free(LIS302_IRQ1_GPIO); + gpio_free(LIS302_IRQ2_GPIO); + + return 0; +} + +static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { + .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | + LIS3_CLICK_SINGLE_Z, + /* Limits are 0.5g * value */ + .click_thresh_x = 8, + .click_thresh_y = 8, + .click_thresh_z = 10, + /* Click must be longer than time limit */ + .click_time_limit = 9, + /* Kind of debounce filter */ + .click_latency = 50, + + /* Limits for all axis. millig-value / 18 to get HW values */ + .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, + .wakeup_thresh = 800 / 18, + .wakeup_flags2 = LIS3_WAKEUP_Z_HI , + .wakeup_thresh2 = 900 / 18, + + .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, + + /* Interrupt line 2 for click detection, line 1 for thresholds */ + .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, + + .axis_x = LIS3_DEV_X, + .axis_y = LIS3_INV_DEV_Y, + .axis_z = LIS3_INV_DEV_Z, + .setup_resources = lis302_setup, + .release_resources = lis302_release, + .st_min_limits = {-32, 3, 3}, + .st_max_limits = {-3, 32, 32}, +}; +#endif + #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) static struct tsl2563_platform_data rx51_tsl2563_platform_data = { .cover_comp_gain = 16, @@ -79,76 +164,82 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { #endif #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) -static struct lp5523_led_config rx51_lp5523_led_config[] = { +static struct lp55xx_led_config rx51_lp5523_led_config[] = { { + .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:b", .chan_nr = 4, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:g", .chan_nr = 5, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:r", .chan_nr = 6, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, + .max_current = 100, } }; -static int rx51_lp5523_setup(void) -{ - return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, - "lp5523_enable"); -} - -static void rx51_lp5523_release(void) -{ - gpio_free(RX51_LP5523_CHIP_EN_GPIO); -} - -static void rx51_lp5523_enable(bool state) -{ - gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); -} - -static struct lp5523_platform_data rx51_lp5523_platform_data = { +static struct lp55xx_platform_data rx51_lp5523_platform_data = { .led_config = rx51_lp5523_led_config, .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP5523_CLOCK_AUTO, - .setup_resources = rx51_lp5523_setup, - .release_resources = rx51_lp5523_release, - .enable = rx51_lp5523_enable, + .clock_mode = LP55XX_CLOCK_AUTO, + .enable_gpio = RX51_LP5523_CHIP_EN_GPIO, }; #endif +#define RX51_LCD_RESET_GPIO 90 + +static struct panel_acx565akm_platform_data acx_pdata = { + .name = "lcd", + .source = "sdi.0", + .reset_gpio = RX51_LCD_RESET_GPIO, + .datapairs = 2, +}; + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct omap2_mcspi_device_config mipid_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct omap2_mcspi_device_config tsc2005_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { @@ -167,18 +258,23 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .chip_select = 2, .max_speed_hz = 6000000, .controller_data = &mipid_mcspi_config, + .platform_data = &acx_pdata, }, [RX51_SPI_TSC2005] = { .modalias = "tsc2005", .bus_num = 1, .chip_select = 0, - .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), .max_speed_hz = 6000000, .controller_data = &tsc2005_mcspi_config, .platform_data = &tsc2005_pdata, }, }; +static struct platform_device rx51_battery_device = { + .name = "rx51-battery", + .id = -1, +}; + static void rx51_charger_set_power(bool on) { gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); @@ -200,6 +296,7 @@ static void __init rx51_charger_init(void) WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, GPIOF_OUT_INIT_HIGH, "isp1704_reset")); + platform_device_register(&rx51_battery_device); platform_device_register(&rx51_charger_device); } @@ -455,12 +552,17 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), + REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { @@ -658,7 +760,14 @@ static struct regulator_init_data rx51_vintdig = { }, }; +static const char * const si4713_supply_names[] = { + "vio", + "vdd", +}; + static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { + .supplies = ARRAY_SIZE(si4713_supply_names), + .supply_names = si4713_supply_names, .gpio_reset = RX51_FMTX_RESET_GPIO, }; @@ -672,7 +781,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev = { +static struct platform_device rx51_si4713_dev __initdata_or_module = { .name = "radio-si4713", .id = -1, .dev = { @@ -703,9 +812,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) } static struct twl4030_gpio_platform_data rx51_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(8) | BIT(9) | BIT(10) | BIT(11) @@ -875,11 +981,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { .resource_config = twl4030_rconfig, }; -struct twl4030_vibra_data rx51_vibra_data __initdata = { +static struct twl4030_vibra_data rx51_vibra_data __initdata = { .coexist = 0, }; -struct twl4030_audio_data rx51_audio_data __initdata = { +static struct twl4030_audio_data rx51_audio_data __initdata = { .audio_mclk = 26000000, .vibra = &rx51_vibra_data, }; @@ -953,6 +1059,15 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { } }; +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + { + I2C_BOARD_INFO("lis3lv02d", 0x1d), + .platform_data = &rx51_lis3lv02d_data, + }, +#endif +}; + static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || @@ -971,10 +1086,15 @@ static int __init rx51_i2c_init(void) rx51_twldata.vdac->constraints.apply_uV = true; rx51_twldata.vdac->constraints.name = "VDAC"; - omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); + omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); - omap_register_i2c_bus(3, 400, NULL, 0); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif + omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; } @@ -1053,13 +1173,7 @@ static inline void board_smc91x_init(void) #endif -static void rx51_wl1251_set_power(bool enable) -{ - gpio_set_value(RX51_WL1251_POWER_GPIO, enable); -} - static struct gpio rx51_wl1251_gpios[] __initdata = { - { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, }; @@ -1076,17 +1190,16 @@ static void __init rx51_init_wl1251(void) if (irq < 0) goto err_irq; - wl1251_pdata.set_power = rx51_wl1251_set_power; + wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO; rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; return; err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - gpio_free(RX51_WL1251_POWER_GPIO); error: printk(KERN_ERR "wl1251 board initialisation failed\n"); - wl1251_pdata.set_power = NULL; + wl1251_pdata.power_gpio = -1; /* * Now rx51_peripherals_spi_board_info[1].irq is zero and @@ -1105,6 +1218,11 @@ static struct tsc2005_platform_data tsc2005_pdata = { .esd_timeout_ms = 8000, }; +static struct gpio rx51_tsc2005_gpios[] __initdata = { + { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, + { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, +}; + static void rx51_tsc2005_set_reset(bool enable) { gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); @@ -1114,19 +1232,69 @@ static void __init rx51_init_tsc2005(void) { int r; - r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ"); + omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); + + r = gpio_request_array(rx51_tsc2005_gpios, + ARRAY_SIZE(rx51_tsc2005_gpios)); if (r < 0) { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ"); - rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0; + printk(KERN_ERR "tsc2005 board initialization failed\n"); + tsc2005_pdata.esd_timeout_ms = 0; + return; } - r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, - "tsc2005 reset"); - if (r >= 0) { - tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; - } else { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); - tsc2005_pdata.esd_timeout_ms = 0; + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; + rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = + gpio_to_irq(RX51_TSC2005_IRQ_GPIO); +} + +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +static struct lirc_rx51_platform_data rx51_lirc_data = { + .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, + .pwm_timer = 9, /* Use GPT 9 for CIR */ +}; + +static struct platform_device rx51_lirc_device = { + .name = "lirc_rx51", + .id = -1, + .dev = { + .platform_data = &rx51_lirc_data, + }, +}; + +static void __init rx51_init_lirc(void) +{ + platform_device_register(&rx51_lirc_device); +} +#else +static void __init rx51_init_lirc(void) +{ +} +#endif + +static struct platform_device madc_hwmon = { + .name = "twl4030_madc_hwmon", + .id = -1, +}; + +static void __init rx51_init_twl4030_hwmon(void) +{ + platform_device_register(&madc_hwmon); +} + +static struct platform_device omap3_rom_rng_device = { + .name = "omap3-rom-rng", + .id = -1, + .dev = { + .platform_data = rx51_secure_rng_call, + }, +}; + +static void __init rx51_init_omap3_rom_rng(void) +{ + if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { + pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + platform_device_register(&omap3_rom_rng_device); } } @@ -1140,13 +1308,16 @@ void __init rx51_peripherals_init(void) rx51_init_wl1251(); rx51_init_tsc2005(); rx51_init_si4713(); + rx51_init_lirc(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); partition = omap_mux_get("core"); if (partition) - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); rx51_charger_init(); + rx51_init_twl4030_hwmon(); + rx51_init_omap3_rom_rng(); } |