diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-rx51-peripherals.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 119 |
1 files changed, 83 insertions, 36 deletions
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index cf07e289b4e..ddfc8df83c6 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -40,11 +40,13 @@ #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> -#include <linux/leds-lp5523.h> +#include <linux/platform_data/leds-lp55xx.h> -#include <../drivers/staging/iio/light/tsl2563.h> +#include <linux/platform_data/tsl2563.h> #include <linux/lis3lv02d.h> +#include <video/omap-panel-data.h> + #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) #include <media/ir-rx51.h> #endif @@ -55,6 +57,8 @@ #include "common-board-devices.h" #include "gpmc.h" #include "gpmc-onenand.h" +#include "soc.h" +#include "omap-secure.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 @@ -73,14 +77,14 @@ #define LIS302_IRQ1_GPIO 181 #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ -/* list all spi devices here */ +/* List all SPI devices here. Note that the list/probe order seems to matter! */ enum { RX51_SPI_WL1251, - RX51_SPI_MIPID, /* LCD panel */ RX51_SPI_TSC2005, /* Touch Controller */ + RX51_SPI_MIPID, /* LCD panel */ }; -static struct wl12xx_platform_data wl1251_pdata; +static struct wl1251_platform_data wl1251_pdata; static struct tsc2005_platform_data tsc2005_pdata; #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) @@ -160,63 +164,72 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { #endif #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) -static struct lp5523_led_config rx51_lp5523_led_config[] = { +static struct lp55xx_led_config rx51_lp5523_led_config[] = { { + .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:b", .chan_nr = 4, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:g", .chan_nr = 5, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:r", .chan_nr = 6, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, + .max_current = 100, }, { + .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, + .max_current = 100, } }; -static int rx51_lp5523_setup(void) -{ - return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, - "lp5523_enable"); -} - -static void rx51_lp5523_release(void) -{ - gpio_free(RX51_LP5523_CHIP_EN_GPIO); -} - -static void rx51_lp5523_enable(bool state) -{ - gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); -} - -static struct lp5523_platform_data rx51_lp5523_platform_data = { +static struct lp55xx_platform_data rx51_lp5523_platform_data = { .led_config = rx51_lp5523_led_config, .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP5523_CLOCK_AUTO, - .setup_resources = rx51_lp5523_setup, - .release_resources = rx51_lp5523_release, - .enable = rx51_lp5523_enable, + .clock_mode = LP55XX_CLOCK_AUTO, + .enable_gpio = RX51_LP5523_CHIP_EN_GPIO, }; #endif +#define RX51_LCD_RESET_GPIO 90 + +static struct panel_acx565akm_platform_data acx_pdata = { + .name = "lcd", + .source = "sdi.0", + .reset_gpio = RX51_LCD_RESET_GPIO, + .datapairs = 2, +}; + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, }; @@ -245,6 +258,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .chip_select = 2, .max_speed_hz = 6000000, .controller_data = &mipid_mcspi_config, + .platform_data = &acx_pdata, }, [RX51_SPI_TSC2005] = { .modalias = "tsc2005", @@ -538,12 +552,17 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), + REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { @@ -741,7 +760,14 @@ static struct regulator_init_data rx51_vintdig = { }, }; +static const char * const si4713_supply_names[] = { + "vio", + "vdd", +}; + static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { + .supplies = ARRAY_SIZE(si4713_supply_names), + .supply_names = si4713_supply_names, .gpio_reset = RX51_FMTX_RESET_GPIO, }; @@ -1147,13 +1173,7 @@ static inline void board_smc91x_init(void) #endif -static void rx51_wl1251_set_power(bool enable) -{ - gpio_set_value(RX51_WL1251_POWER_GPIO, enable); -} - static struct gpio rx51_wl1251_gpios[] __initdata = { - { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, }; @@ -1170,17 +1190,16 @@ static void __init rx51_init_wl1251(void) if (irq < 0) goto err_irq; - wl1251_pdata.set_power = rx51_wl1251_set_power; + wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO; rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; return; err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - gpio_free(RX51_WL1251_POWER_GPIO); error: printk(KERN_ERR "wl1251 board initialisation failed\n"); - wl1251_pdata.set_power = NULL; + wl1251_pdata.power_gpio = -1; /* * Now rx51_peripherals_spi_board_info[1].irq is zero and @@ -1253,6 +1272,32 @@ static void __init rx51_init_lirc(void) } #endif +static struct platform_device madc_hwmon = { + .name = "twl4030_madc_hwmon", + .id = -1, +}; + +static void __init rx51_init_twl4030_hwmon(void) +{ + platform_device_register(&madc_hwmon); +} + +static struct platform_device omap3_rom_rng_device = { + .name = "omap3-rom-rng", + .id = -1, + .dev = { + .platform_data = rx51_secure_rng_call, + }, +}; + +static void __init rx51_init_omap3_rom_rng(void) +{ + if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { + pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + platform_device_register(&omap3_rom_rng_device); + } +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1272,5 +1317,7 @@ void __init rx51_peripherals_init(void) omap_hsmmc_init(mmc); rx51_charger_init(); + rx51_init_twl4030_hwmon(); + rx51_init_omap3_rom_rng(); } |